1 /** 2 * Freescale MPC8610HPCD ALSA SoC Machine driver 3 * 4 * Author: Timur Tabi <timur@freescale.com> 5 * 6 * Copyright 2007-2010 Freescale Semiconductor, Inc. 7 * 8 * This file is licensed under the terms of the GNU General Public License 9 * version 2. This program is licensed "as is" without any warranty of any 10 * kind, whether express or implied. 11 */ 12 13 #include <linux/module.h> 14 #include <linux/interrupt.h> 15 #include <linux/of_device.h> 16 #include <linux/slab.h> 17 #include <sound/soc.h> 18 #include <asm/fsl_guts.h> 19 20 #include "fsl_dma.h" 21 #include "fsl_ssi.h" 22 #include "fsl_utils.h" 23 24 /* There's only one global utilities register */ 25 static phys_addr_t guts_phys; 26 27 /** 28 * mpc8610_hpcd_data: machine-specific ASoC device data 29 * 30 * This structure contains data for a single sound platform device on an 31 * MPC8610 HPCD. Some of the data is taken from the device tree. 32 */ 33 struct mpc8610_hpcd_data { 34 struct snd_soc_dai_link dai[2]; 35 struct snd_soc_card card; 36 unsigned int dai_format; 37 unsigned int codec_clk_direction; 38 unsigned int cpu_clk_direction; 39 unsigned int clk_frequency; 40 unsigned int ssi_id; /* 0 = SSI1, 1 = SSI2, etc */ 41 unsigned int dma_id[2]; /* 0 = DMA1, 1 = DMA2, etc */ 42 unsigned int dma_channel_id[2]; /* 0 = ch 0, 1 = ch 1, etc*/ 43 char codec_dai_name[DAI_NAME_SIZE]; 44 char platform_name[2][DAI_NAME_SIZE]; /* One for each DMA channel */ 45 }; 46 47 /** 48 * mpc8610_hpcd_machine_probe: initialize the board 49 * 50 * This function is used to initialize the board-specific hardware. 51 * 52 * Here we program the DMACR and PMUXCR registers. 53 */ 54 static int mpc8610_hpcd_machine_probe(struct snd_soc_card *card) 55 { 56 struct mpc8610_hpcd_data *machine_data = 57 container_of(card, struct mpc8610_hpcd_data, card); 58 struct ccsr_guts __iomem *guts; 59 60 guts = ioremap(guts_phys, sizeof(struct ccsr_guts)); 61 if (!guts) { 62 dev_err(card->dev, "could not map global utilities\n"); 63 return -ENOMEM; 64 } 65 66 /* Program the signal routing between the SSI and the DMA */ 67 guts_set_dmacr(guts, machine_data->dma_id[0], 68 machine_data->dma_channel_id[0], 69 CCSR_GUTS_DMACR_DEV_SSI); 70 guts_set_dmacr(guts, machine_data->dma_id[1], 71 machine_data->dma_channel_id[1], 72 CCSR_GUTS_DMACR_DEV_SSI); 73 74 guts_set_pmuxcr_dma(guts, machine_data->dma_id[0], 75 machine_data->dma_channel_id[0], 0); 76 guts_set_pmuxcr_dma(guts, machine_data->dma_id[1], 77 machine_data->dma_channel_id[1], 0); 78 79 switch (machine_data->ssi_id) { 80 case 0: 81 clrsetbits_be32(&guts->pmuxcr, 82 CCSR_GUTS_PMUXCR_SSI1_MASK, CCSR_GUTS_PMUXCR_SSI1_SSI); 83 break; 84 case 1: 85 clrsetbits_be32(&guts->pmuxcr, 86 CCSR_GUTS_PMUXCR_SSI2_MASK, CCSR_GUTS_PMUXCR_SSI2_SSI); 87 break; 88 } 89 90 iounmap(guts); 91 92 return 0; 93 } 94 95 /** 96 * mpc8610_hpcd_startup: program the board with various hardware parameters 97 * 98 * This function takes board-specific information, like clock frequencies 99 * and serial data formats, and passes that information to the codec and 100 * transport drivers. 101 */ 102 static int mpc8610_hpcd_startup(struct snd_pcm_substream *substream) 103 { 104 struct snd_soc_pcm_runtime *rtd = substream->private_data; 105 struct mpc8610_hpcd_data *machine_data = 106 container_of(rtd->card, struct mpc8610_hpcd_data, card); 107 struct device *dev = rtd->card->dev; 108 int ret = 0; 109 110 /* Tell the codec driver what the serial protocol is. */ 111 ret = snd_soc_dai_set_fmt(rtd->codec_dai, machine_data->dai_format); 112 if (ret < 0) { 113 dev_err(dev, "could not set codec driver audio format\n"); 114 return ret; 115 } 116 117 /* 118 * Tell the codec driver what the MCLK frequency is, and whether it's 119 * a slave or master. 120 */ 121 ret = snd_soc_dai_set_sysclk(rtd->codec_dai, 0, 122 machine_data->clk_frequency, 123 machine_data->codec_clk_direction); 124 if (ret < 0) { 125 dev_err(dev, "could not set codec driver clock params\n"); 126 return ret; 127 } 128 129 return 0; 130 } 131 132 /** 133 * mpc8610_hpcd_machine_remove: Remove the sound device 134 * 135 * This function is called to remove the sound device for one SSI. We 136 * de-program the DMACR and PMUXCR register. 137 */ 138 static int mpc8610_hpcd_machine_remove(struct snd_soc_card *card) 139 { 140 struct mpc8610_hpcd_data *machine_data = 141 container_of(card, struct mpc8610_hpcd_data, card); 142 struct ccsr_guts __iomem *guts; 143 144 guts = ioremap(guts_phys, sizeof(struct ccsr_guts)); 145 if (!guts) { 146 dev_err(card->dev, "could not map global utilities\n"); 147 return -ENOMEM; 148 } 149 150 /* Restore the signal routing */ 151 152 guts_set_dmacr(guts, machine_data->dma_id[0], 153 machine_data->dma_channel_id[0], 0); 154 guts_set_dmacr(guts, machine_data->dma_id[1], 155 machine_data->dma_channel_id[1], 0); 156 157 switch (machine_data->ssi_id) { 158 case 0: 159 clrsetbits_be32(&guts->pmuxcr, 160 CCSR_GUTS_PMUXCR_SSI1_MASK, CCSR_GUTS_PMUXCR_SSI1_LA); 161 break; 162 case 1: 163 clrsetbits_be32(&guts->pmuxcr, 164 CCSR_GUTS_PMUXCR_SSI2_MASK, CCSR_GUTS_PMUXCR_SSI2_LA); 165 break; 166 } 167 168 iounmap(guts); 169 170 return 0; 171 } 172 173 /** 174 * mpc8610_hpcd_ops: ASoC machine driver operations 175 */ 176 static struct snd_soc_ops mpc8610_hpcd_ops = { 177 .startup = mpc8610_hpcd_startup, 178 }; 179 180 /** 181 * mpc8610_hpcd_probe: platform probe function for the machine driver 182 * 183 * Although this is a machine driver, the SSI node is the "master" node with 184 * respect to audio hardware connections. Therefore, we create a new ASoC 185 * device for each new SSI node that has a codec attached. 186 */ 187 static int mpc8610_hpcd_probe(struct platform_device *pdev) 188 { 189 struct device *dev = pdev->dev.parent; 190 /* ssi_pdev is the platform device for the SSI node that probed us */ 191 struct platform_device *ssi_pdev = 192 container_of(dev, struct platform_device, dev); 193 struct device_node *np = ssi_pdev->dev.of_node; 194 struct device_node *codec_np = NULL; 195 struct mpc8610_hpcd_data *machine_data; 196 int ret = -ENODEV; 197 const char *sprop; 198 const u32 *iprop; 199 200 /* Find the codec node for this SSI. */ 201 codec_np = of_parse_phandle(np, "codec-handle", 0); 202 if (!codec_np) { 203 dev_err(dev, "invalid codec node\n"); 204 return -EINVAL; 205 } 206 207 machine_data = kzalloc(sizeof(struct mpc8610_hpcd_data), GFP_KERNEL); 208 if (!machine_data) { 209 ret = -ENOMEM; 210 goto error_alloc; 211 } 212 213 machine_data->dai[0].cpu_dai_name = dev_name(&ssi_pdev->dev); 214 machine_data->dai[0].ops = &mpc8610_hpcd_ops; 215 216 /* ASoC core can match codec with device node */ 217 machine_data->dai[0].codec_of_node = codec_np; 218 219 /* The DAI name from the codec (snd_soc_dai_driver.name) */ 220 machine_data->dai[0].codec_dai_name = "cs4270-hifi"; 221 222 /* We register two DAIs per SSI, one for playback and the other for 223 * capture. Currently, we only support codecs that have one DAI for 224 * both playback and capture. 225 */ 226 memcpy(&machine_data->dai[1], &machine_data->dai[0], 227 sizeof(struct snd_soc_dai_link)); 228 229 /* Get the device ID */ 230 iprop = of_get_property(np, "cell-index", NULL); 231 if (!iprop) { 232 dev_err(&pdev->dev, "cell-index property not found\n"); 233 ret = -EINVAL; 234 goto error; 235 } 236 machine_data->ssi_id = be32_to_cpup(iprop); 237 238 /* Get the serial format and clock direction. */ 239 sprop = of_get_property(np, "fsl,mode", NULL); 240 if (!sprop) { 241 dev_err(&pdev->dev, "fsl,mode property not found\n"); 242 ret = -EINVAL; 243 goto error; 244 } 245 246 if (strcasecmp(sprop, "i2s-slave") == 0) { 247 machine_data->dai_format = 248 SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBM_CFM; 249 machine_data->codec_clk_direction = SND_SOC_CLOCK_OUT; 250 machine_data->cpu_clk_direction = SND_SOC_CLOCK_IN; 251 252 /* In i2s-slave mode, the codec has its own clock source, so we 253 * need to get the frequency from the device tree and pass it to 254 * the codec driver. 255 */ 256 iprop = of_get_property(codec_np, "clock-frequency", NULL); 257 if (!iprop || !*iprop) { 258 dev_err(&pdev->dev, "codec bus-frequency " 259 "property is missing or invalid\n"); 260 ret = -EINVAL; 261 goto error; 262 } 263 machine_data->clk_frequency = be32_to_cpup(iprop); 264 } else if (strcasecmp(sprop, "i2s-master") == 0) { 265 machine_data->dai_format = 266 SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBS_CFS; 267 machine_data->codec_clk_direction = SND_SOC_CLOCK_IN; 268 machine_data->cpu_clk_direction = SND_SOC_CLOCK_OUT; 269 } else if (strcasecmp(sprop, "lj-slave") == 0) { 270 machine_data->dai_format = 271 SND_SOC_DAIFMT_LEFT_J | SND_SOC_DAIFMT_CBM_CFM; 272 machine_data->codec_clk_direction = SND_SOC_CLOCK_OUT; 273 machine_data->cpu_clk_direction = SND_SOC_CLOCK_IN; 274 } else if (strcasecmp(sprop, "lj-master") == 0) { 275 machine_data->dai_format = 276 SND_SOC_DAIFMT_LEFT_J | SND_SOC_DAIFMT_CBS_CFS; 277 machine_data->codec_clk_direction = SND_SOC_CLOCK_IN; 278 machine_data->cpu_clk_direction = SND_SOC_CLOCK_OUT; 279 } else if (strcasecmp(sprop, "rj-slave") == 0) { 280 machine_data->dai_format = 281 SND_SOC_DAIFMT_RIGHT_J | SND_SOC_DAIFMT_CBM_CFM; 282 machine_data->codec_clk_direction = SND_SOC_CLOCK_OUT; 283 machine_data->cpu_clk_direction = SND_SOC_CLOCK_IN; 284 } else if (strcasecmp(sprop, "rj-master") == 0) { 285 machine_data->dai_format = 286 SND_SOC_DAIFMT_RIGHT_J | SND_SOC_DAIFMT_CBS_CFS; 287 machine_data->codec_clk_direction = SND_SOC_CLOCK_IN; 288 machine_data->cpu_clk_direction = SND_SOC_CLOCK_OUT; 289 } else if (strcasecmp(sprop, "ac97-slave") == 0) { 290 machine_data->dai_format = 291 SND_SOC_DAIFMT_AC97 | SND_SOC_DAIFMT_CBM_CFM; 292 machine_data->codec_clk_direction = SND_SOC_CLOCK_OUT; 293 machine_data->cpu_clk_direction = SND_SOC_CLOCK_IN; 294 } else if (strcasecmp(sprop, "ac97-master") == 0) { 295 machine_data->dai_format = 296 SND_SOC_DAIFMT_AC97 | SND_SOC_DAIFMT_CBS_CFS; 297 machine_data->codec_clk_direction = SND_SOC_CLOCK_IN; 298 machine_data->cpu_clk_direction = SND_SOC_CLOCK_OUT; 299 } else { 300 dev_err(&pdev->dev, 301 "unrecognized fsl,mode property '%s'\n", sprop); 302 ret = -EINVAL; 303 goto error; 304 } 305 306 if (!machine_data->clk_frequency) { 307 dev_err(&pdev->dev, "unknown clock frequency\n"); 308 ret = -EINVAL; 309 goto error; 310 } 311 312 /* Find the playback DMA channel to use. */ 313 machine_data->dai[0].platform_name = machine_data->platform_name[0]; 314 ret = fsl_asoc_get_dma_channel(np, "fsl,playback-dma", 315 &machine_data->dai[0], 316 &machine_data->dma_channel_id[0], 317 &machine_data->dma_id[0]); 318 if (ret) { 319 dev_err(&pdev->dev, "missing/invalid playback DMA phandle\n"); 320 goto error; 321 } 322 323 /* Find the capture DMA channel to use. */ 324 machine_data->dai[1].platform_name = machine_data->platform_name[1]; 325 ret = fsl_asoc_get_dma_channel(np, "fsl,capture-dma", 326 &machine_data->dai[1], 327 &machine_data->dma_channel_id[1], 328 &machine_data->dma_id[1]); 329 if (ret) { 330 dev_err(&pdev->dev, "missing/invalid capture DMA phandle\n"); 331 goto error; 332 } 333 334 /* Initialize our DAI data structure. */ 335 machine_data->dai[0].stream_name = "playback"; 336 machine_data->dai[1].stream_name = "capture"; 337 machine_data->dai[0].name = machine_data->dai[0].stream_name; 338 machine_data->dai[1].name = machine_data->dai[1].stream_name; 339 340 machine_data->card.probe = mpc8610_hpcd_machine_probe; 341 machine_data->card.remove = mpc8610_hpcd_machine_remove; 342 machine_data->card.name = pdev->name; /* The platform driver name */ 343 machine_data->card.owner = THIS_MODULE; 344 machine_data->card.dev = &pdev->dev; 345 machine_data->card.num_links = 2; 346 machine_data->card.dai_link = machine_data->dai; 347 348 /* Register with ASoC */ 349 ret = snd_soc_register_card(&machine_data->card); 350 if (ret) { 351 dev_err(&pdev->dev, "could not register card\n"); 352 goto error; 353 } 354 355 of_node_put(codec_np); 356 357 return 0; 358 359 error: 360 kfree(machine_data); 361 error_alloc: 362 of_node_put(codec_np); 363 return ret; 364 } 365 366 /** 367 * mpc8610_hpcd_remove: remove the platform device 368 * 369 * This function is called when the platform device is removed. 370 */ 371 static int mpc8610_hpcd_remove(struct platform_device *pdev) 372 { 373 struct snd_soc_card *card = platform_get_drvdata(pdev); 374 struct mpc8610_hpcd_data *machine_data = 375 container_of(card, struct mpc8610_hpcd_data, card); 376 377 snd_soc_unregister_card(card); 378 kfree(machine_data); 379 380 return 0; 381 } 382 383 static struct platform_driver mpc8610_hpcd_driver = { 384 .probe = mpc8610_hpcd_probe, 385 .remove = mpc8610_hpcd_remove, 386 .driver = { 387 /* The name must match 'compatible' property in the device tree, 388 * in lowercase letters. 389 */ 390 .name = "snd-soc-mpc8610hpcd", 391 .owner = THIS_MODULE, 392 }, 393 }; 394 395 /** 396 * mpc8610_hpcd_init: machine driver initialization. 397 * 398 * This function is called when this module is loaded. 399 */ 400 static int __init mpc8610_hpcd_init(void) 401 { 402 struct device_node *guts_np; 403 struct resource res; 404 405 pr_info("Freescale MPC8610 HPCD ALSA SoC machine driver\n"); 406 407 /* Get the physical address of the global utilities registers */ 408 guts_np = of_find_compatible_node(NULL, NULL, "fsl,mpc8610-guts"); 409 if (of_address_to_resource(guts_np, 0, &res)) { 410 pr_err("mpc8610-hpcd: missing/invalid global utilities node\n"); 411 return -EINVAL; 412 } 413 guts_phys = res.start; 414 415 return platform_driver_register(&mpc8610_hpcd_driver); 416 } 417 418 /** 419 * mpc8610_hpcd_exit: machine driver exit 420 * 421 * This function is called when this driver is unloaded. 422 */ 423 static void __exit mpc8610_hpcd_exit(void) 424 { 425 platform_driver_unregister(&mpc8610_hpcd_driver); 426 } 427 428 module_init(mpc8610_hpcd_init); 429 module_exit(mpc8610_hpcd_exit); 430 431 MODULE_AUTHOR("Timur Tabi <timur@freescale.com>"); 432 MODULE_DESCRIPTION("Freescale MPC8610 HPCD ALSA SoC machine driver"); 433 MODULE_LICENSE("GPL v2"); 434