xref: /openbmc/linux/sound/soc/codecs/wm8993.c (revision 75f25bd3)
1 /*
2  * wm8993.c -- WM8993 ALSA SoC audio driver
3  *
4  * Copyright 2009, 2010 Wolfson Microelectronics plc
5  *
6  * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
7  *
8  * This program is free software; you can redistribute it and/or modify
9  * it under the terms of the GNU General Public License version 2 as
10  * published by the Free Software Foundation.
11  */
12 
13 #include <linux/module.h>
14 #include <linux/moduleparam.h>
15 #include <linux/init.h>
16 #include <linux/delay.h>
17 #include <linux/pm.h>
18 #include <linux/i2c.h>
19 #include <linux/regulator/consumer.h>
20 #include <linux/spi/spi.h>
21 #include <linux/slab.h>
22 #include <sound/core.h>
23 #include <sound/pcm.h>
24 #include <sound/pcm_params.h>
25 #include <sound/tlv.h>
26 #include <sound/soc.h>
27 #include <sound/initval.h>
28 #include <sound/wm8993.h>
29 
30 #include "wm8993.h"
31 #include "wm_hubs.h"
32 
33 #define WM8993_NUM_SUPPLIES 6
34 static const char *wm8993_supply_names[WM8993_NUM_SUPPLIES] = {
35 	"DCVDD",
36 	"DBVDD",
37 	"AVDD1",
38 	"AVDD2",
39 	"CPVDD",
40 	"SPKVDD",
41 };
42 
43 static u16 wm8993_reg_defaults[WM8993_REGISTER_COUNT] = {
44 	0x8993,     /* R0   - Software Reset */
45 	0x0000,     /* R1   - Power Management (1) */
46 	0x6000,     /* R2   - Power Management (2) */
47 	0x0000,     /* R3   - Power Management (3) */
48 	0x4050,     /* R4   - Audio Interface (1) */
49 	0x4000,     /* R5   - Audio Interface (2) */
50 	0x01C8,     /* R6   - Clocking 1 */
51 	0x0000,     /* R7   - Clocking 2 */
52 	0x0000,     /* R8   - Audio Interface (3) */
53 	0x0040,     /* R9   - Audio Interface (4) */
54 	0x0004,     /* R10  - DAC CTRL */
55 	0x00C0,     /* R11  - Left DAC Digital Volume */
56 	0x00C0,     /* R12  - Right DAC Digital Volume */
57 	0x0000,     /* R13  - Digital Side Tone */
58 	0x0300,     /* R14  - ADC CTRL */
59 	0x00C0,     /* R15  - Left ADC Digital Volume */
60 	0x00C0,     /* R16  - Right ADC Digital Volume */
61 	0x0000,     /* R17 */
62 	0x0000,     /* R18  - GPIO CTRL 1 */
63 	0x0010,     /* R19  - GPIO1 */
64 	0x0000,     /* R20  - IRQ_DEBOUNCE */
65 	0x0000,     /* R21 */
66 	0x8000,     /* R22  - GPIOCTRL 2 */
67 	0x0800,     /* R23  - GPIO_POL */
68 	0x008B,     /* R24  - Left Line Input 1&2 Volume */
69 	0x008B,     /* R25  - Left Line Input 3&4 Volume */
70 	0x008B,     /* R26  - Right Line Input 1&2 Volume */
71 	0x008B,     /* R27  - Right Line Input 3&4 Volume */
72 	0x006D,     /* R28  - Left Output Volume */
73 	0x006D,     /* R29  - Right Output Volume */
74 	0x0066,     /* R30  - Line Outputs Volume */
75 	0x0020,     /* R31  - HPOUT2 Volume */
76 	0x0079,     /* R32  - Left OPGA Volume */
77 	0x0079,     /* R33  - Right OPGA Volume */
78 	0x0003,     /* R34  - SPKMIXL Attenuation */
79 	0x0003,     /* R35  - SPKMIXR Attenuation */
80 	0x0011,     /* R36  - SPKOUT Mixers */
81 	0x0100,     /* R37  - SPKOUT Boost */
82 	0x0079,     /* R38  - Speaker Volume Left */
83 	0x0079,     /* R39  - Speaker Volume Right */
84 	0x0000,     /* R40  - Input Mixer2 */
85 	0x0000,     /* R41  - Input Mixer3 */
86 	0x0000,     /* R42  - Input Mixer4 */
87 	0x0000,     /* R43  - Input Mixer5 */
88 	0x0000,     /* R44  - Input Mixer6 */
89 	0x0000,     /* R45  - Output Mixer1 */
90 	0x0000,     /* R46  - Output Mixer2 */
91 	0x0000,     /* R47  - Output Mixer3 */
92 	0x0000,     /* R48  - Output Mixer4 */
93 	0x0000,     /* R49  - Output Mixer5 */
94 	0x0000,     /* R50  - Output Mixer6 */
95 	0x0000,     /* R51  - HPOUT2 Mixer */
96 	0x0000,     /* R52  - Line Mixer1 */
97 	0x0000,     /* R53  - Line Mixer2 */
98 	0x0000,     /* R54  - Speaker Mixer */
99 	0x0000,     /* R55  - Additional Control */
100 	0x0000,     /* R56  - AntiPOP1 */
101 	0x0000,     /* R57  - AntiPOP2 */
102 	0x0000,     /* R58  - MICBIAS */
103 	0x0000,     /* R59 */
104 	0x0000,     /* R60  - FLL Control 1 */
105 	0x0000,     /* R61  - FLL Control 2 */
106 	0x0000,     /* R62  - FLL Control 3 */
107 	0x2EE0,     /* R63  - FLL Control 4 */
108 	0x0002,     /* R64  - FLL Control 5 */
109 	0x2287,     /* R65  - Clocking 3 */
110 	0x025F,     /* R66  - Clocking 4 */
111 	0x0000,     /* R67  - MW Slave Control */
112 	0x0000,     /* R68 */
113 	0x0002,     /* R69  - Bus Control 1 */
114 	0x0000,     /* R70  - Write Sequencer 0 */
115 	0x0000,     /* R71  - Write Sequencer 1 */
116 	0x0000,     /* R72  - Write Sequencer 2 */
117 	0x0000,     /* R73  - Write Sequencer 3 */
118 	0x0000,     /* R74  - Write Sequencer 4 */
119 	0x0000,     /* R75  - Write Sequencer 5 */
120 	0x1F25,     /* R76  - Charge Pump 1 */
121 	0x0000,     /* R77 */
122 	0x0000,     /* R78 */
123 	0x0000,     /* R79 */
124 	0x0000,     /* R80 */
125 	0x0000,     /* R81  - Class W 0 */
126 	0x0000,     /* R82 */
127 	0x0000,     /* R83 */
128 	0x0000,     /* R84  - DC Servo 0 */
129 	0x054A,     /* R85  - DC Servo 1 */
130 	0x0000,     /* R86 */
131 	0x0000,     /* R87  - DC Servo 3 */
132 	0x0000,     /* R88  - DC Servo Readback 0 */
133 	0x0000,     /* R89  - DC Servo Readback 1 */
134 	0x0000,     /* R90  - DC Servo Readback 2 */
135 	0x0000,     /* R91 */
136 	0x0000,     /* R92 */
137 	0x0000,     /* R93 */
138 	0x0000,     /* R94 */
139 	0x0000,     /* R95 */
140 	0x0100,     /* R96  - Analogue HP 0 */
141 	0x0000,     /* R97 */
142 	0x0000,     /* R98  - EQ1 */
143 	0x000C,     /* R99  - EQ2 */
144 	0x000C,     /* R100 - EQ3 */
145 	0x000C,     /* R101 - EQ4 */
146 	0x000C,     /* R102 - EQ5 */
147 	0x000C,     /* R103 - EQ6 */
148 	0x0FCA,     /* R104 - EQ7 */
149 	0x0400,     /* R105 - EQ8 */
150 	0x00D8,     /* R106 - EQ9 */
151 	0x1EB5,     /* R107 - EQ10 */
152 	0xF145,     /* R108 - EQ11 */
153 	0x0B75,     /* R109 - EQ12 */
154 	0x01C5,     /* R110 - EQ13 */
155 	0x1C58,     /* R111 - EQ14 */
156 	0xF373,     /* R112 - EQ15 */
157 	0x0A54,     /* R113 - EQ16 */
158 	0x0558,     /* R114 - EQ17 */
159 	0x168E,     /* R115 - EQ18 */
160 	0xF829,     /* R116 - EQ19 */
161 	0x07AD,     /* R117 - EQ20 */
162 	0x1103,     /* R118 - EQ21 */
163 	0x0564,     /* R119 - EQ22 */
164 	0x0559,     /* R120 - EQ23 */
165 	0x4000,     /* R121 - EQ24 */
166 	0x0000,     /* R122 - Digital Pulls */
167 	0x0F08,     /* R123 - DRC Control 1 */
168 	0x0000,     /* R124 - DRC Control 2 */
169 	0x0080,     /* R125 - DRC Control 3 */
170 	0x0000,     /* R126 - DRC Control 4 */
171 };
172 
173 static struct {
174 	int ratio;
175 	int clk_sys_rate;
176 } clk_sys_rates[] = {
177 	{ 64,   0 },
178 	{ 128,  1 },
179 	{ 192,  2 },
180 	{ 256,  3 },
181 	{ 384,  4 },
182 	{ 512,  5 },
183 	{ 768,  6 },
184 	{ 1024, 7 },
185 	{ 1408, 8 },
186 	{ 1536, 9 },
187 };
188 
189 static struct {
190 	int rate;
191 	int sample_rate;
192 } sample_rates[] = {
193 	{ 8000,  0  },
194 	{ 11025, 1  },
195 	{ 12000, 1  },
196 	{ 16000, 2  },
197 	{ 22050, 3  },
198 	{ 24000, 3  },
199 	{ 32000, 4  },
200 	{ 44100, 5  },
201 	{ 48000, 5  },
202 };
203 
204 static struct {
205 	int div; /* *10 due to .5s */
206 	int bclk_div;
207 } bclk_divs[] = {
208 	{ 10,  0  },
209 	{ 15,  1  },
210 	{ 20,  2  },
211 	{ 30,  3  },
212 	{ 40,  4  },
213 	{ 55,  5  },
214 	{ 60,  6  },
215 	{ 80,  7  },
216 	{ 110, 8  },
217 	{ 120, 9  },
218 	{ 160, 10 },
219 	{ 220, 11 },
220 	{ 240, 12 },
221 	{ 320, 13 },
222 	{ 440, 14 },
223 	{ 480, 15 },
224 };
225 
226 struct wm8993_priv {
227 	struct wm_hubs_data hubs_data;
228 	struct regulator_bulk_data supplies[WM8993_NUM_SUPPLIES];
229 	struct wm8993_platform_data pdata;
230 	enum snd_soc_control_type control_type;
231 	int master;
232 	int sysclk_source;
233 	int tdm_slots;
234 	int tdm_width;
235 	unsigned int mclk_rate;
236 	unsigned int sysclk_rate;
237 	unsigned int fs;
238 	unsigned int bclk;
239 	int class_w_users;
240 	unsigned int fll_fref;
241 	unsigned int fll_fout;
242 	int fll_src;
243 };
244 
245 static int wm8993_volatile(struct snd_soc_codec *codec, unsigned int reg)
246 {
247 	switch (reg) {
248 	case WM8993_SOFTWARE_RESET:
249 	case WM8993_DC_SERVO_0:
250 	case WM8993_DC_SERVO_READBACK_0:
251 	case WM8993_DC_SERVO_READBACK_1:
252 	case WM8993_DC_SERVO_READBACK_2:
253 		return 1;
254 	default:
255 		return 0;
256 	}
257 }
258 
259 struct _fll_div {
260 	u16 fll_fratio;
261 	u16 fll_outdiv;
262 	u16 fll_clk_ref_div;
263 	u16 n;
264 	u16 k;
265 };
266 
267 /* The size in bits of the FLL divide multiplied by 10
268  * to allow rounding later */
269 #define FIXED_FLL_SIZE ((1 << 16) * 10)
270 
271 static struct {
272 	unsigned int min;
273 	unsigned int max;
274 	u16 fll_fratio;
275 	int ratio;
276 } fll_fratios[] = {
277 	{       0,    64000, 4, 16 },
278 	{   64000,   128000, 3,  8 },
279 	{  128000,   256000, 2,  4 },
280 	{  256000,  1000000, 1,  2 },
281 	{ 1000000, 13500000, 0,  1 },
282 };
283 
284 static int fll_factors(struct _fll_div *fll_div, unsigned int Fref,
285 		       unsigned int Fout)
286 {
287 	u64 Kpart;
288 	unsigned int K, Ndiv, Nmod, target;
289 	unsigned int div;
290 	int i;
291 
292 	/* Fref must be <=13.5MHz */
293 	div = 1;
294 	fll_div->fll_clk_ref_div = 0;
295 	while ((Fref / div) > 13500000) {
296 		div *= 2;
297 		fll_div->fll_clk_ref_div++;
298 
299 		if (div > 8) {
300 			pr_err("Can't scale %dMHz input down to <=13.5MHz\n",
301 			       Fref);
302 			return -EINVAL;
303 		}
304 	}
305 
306 	pr_debug("Fref=%u Fout=%u\n", Fref, Fout);
307 
308 	/* Apply the division for our remaining calculations */
309 	Fref /= div;
310 
311 	/* Fvco should be 90-100MHz; don't check the upper bound */
312 	div = 0;
313 	target = Fout * 2;
314 	while (target < 90000000) {
315 		div++;
316 		target *= 2;
317 		if (div > 7) {
318 			pr_err("Unable to find FLL_OUTDIV for Fout=%uHz\n",
319 			       Fout);
320 			return -EINVAL;
321 		}
322 	}
323 	fll_div->fll_outdiv = div;
324 
325 	pr_debug("Fvco=%dHz\n", target);
326 
327 	/* Find an appropriate FLL_FRATIO and factor it out of the target */
328 	for (i = 0; i < ARRAY_SIZE(fll_fratios); i++) {
329 		if (fll_fratios[i].min <= Fref && Fref <= fll_fratios[i].max) {
330 			fll_div->fll_fratio = fll_fratios[i].fll_fratio;
331 			target /= fll_fratios[i].ratio;
332 			break;
333 		}
334 	}
335 	if (i == ARRAY_SIZE(fll_fratios)) {
336 		pr_err("Unable to find FLL_FRATIO for Fref=%uHz\n", Fref);
337 		return -EINVAL;
338 	}
339 
340 	/* Now, calculate N.K */
341 	Ndiv = target / Fref;
342 
343 	fll_div->n = Ndiv;
344 	Nmod = target % Fref;
345 	pr_debug("Nmod=%d\n", Nmod);
346 
347 	/* Calculate fractional part - scale up so we can round. */
348 	Kpart = FIXED_FLL_SIZE * (long long)Nmod;
349 
350 	do_div(Kpart, Fref);
351 
352 	K = Kpart & 0xFFFFFFFF;
353 
354 	if ((K % 10) >= 5)
355 		K += 5;
356 
357 	/* Move down to proper range now rounding is done */
358 	fll_div->k = K / 10;
359 
360 	pr_debug("N=%x K=%x FLL_FRATIO=%x FLL_OUTDIV=%x FLL_CLK_REF_DIV=%x\n",
361 		 fll_div->n, fll_div->k,
362 		 fll_div->fll_fratio, fll_div->fll_outdiv,
363 		 fll_div->fll_clk_ref_div);
364 
365 	return 0;
366 }
367 
368 static int _wm8993_set_fll(struct snd_soc_codec *codec, int fll_id, int source,
369 			  unsigned int Fref, unsigned int Fout)
370 {
371 	struct wm8993_priv *wm8993 = snd_soc_codec_get_drvdata(codec);
372 	u16 reg1, reg4, reg5;
373 	struct _fll_div fll_div;
374 	int ret;
375 
376 	/* Any change? */
377 	if (Fref == wm8993->fll_fref && Fout == wm8993->fll_fout)
378 		return 0;
379 
380 	/* Disable the FLL */
381 	if (Fout == 0) {
382 		dev_dbg(codec->dev, "FLL disabled\n");
383 		wm8993->fll_fref = 0;
384 		wm8993->fll_fout = 0;
385 
386 		reg1 = snd_soc_read(codec, WM8993_FLL_CONTROL_1);
387 		reg1 &= ~WM8993_FLL_ENA;
388 		snd_soc_write(codec, WM8993_FLL_CONTROL_1, reg1);
389 
390 		return 0;
391 	}
392 
393 	ret = fll_factors(&fll_div, Fref, Fout);
394 	if (ret != 0)
395 		return ret;
396 
397 	reg5 = snd_soc_read(codec, WM8993_FLL_CONTROL_5);
398 	reg5 &= ~WM8993_FLL_CLK_SRC_MASK;
399 
400 	switch (fll_id) {
401 	case WM8993_FLL_MCLK:
402 		break;
403 
404 	case WM8993_FLL_LRCLK:
405 		reg5 |= 1;
406 		break;
407 
408 	case WM8993_FLL_BCLK:
409 		reg5 |= 2;
410 		break;
411 
412 	default:
413 		dev_err(codec->dev, "Unknown FLL ID %d\n", fll_id);
414 		return -EINVAL;
415 	}
416 
417 	/* Any FLL configuration change requires that the FLL be
418 	 * disabled first. */
419 	reg1 = snd_soc_read(codec, WM8993_FLL_CONTROL_1);
420 	reg1 &= ~WM8993_FLL_ENA;
421 	snd_soc_write(codec, WM8993_FLL_CONTROL_1, reg1);
422 
423 	/* Apply the configuration */
424 	if (fll_div.k)
425 		reg1 |= WM8993_FLL_FRAC_MASK;
426 	else
427 		reg1 &= ~WM8993_FLL_FRAC_MASK;
428 	snd_soc_write(codec, WM8993_FLL_CONTROL_1, reg1);
429 
430 	snd_soc_write(codec, WM8993_FLL_CONTROL_2,
431 		      (fll_div.fll_outdiv << WM8993_FLL_OUTDIV_SHIFT) |
432 		      (fll_div.fll_fratio << WM8993_FLL_FRATIO_SHIFT));
433 	snd_soc_write(codec, WM8993_FLL_CONTROL_3, fll_div.k);
434 
435 	reg4 = snd_soc_read(codec, WM8993_FLL_CONTROL_4);
436 	reg4 &= ~WM8993_FLL_N_MASK;
437 	reg4 |= fll_div.n << WM8993_FLL_N_SHIFT;
438 	snd_soc_write(codec, WM8993_FLL_CONTROL_4, reg4);
439 
440 	reg5 &= ~WM8993_FLL_CLK_REF_DIV_MASK;
441 	reg5 |= fll_div.fll_clk_ref_div << WM8993_FLL_CLK_REF_DIV_SHIFT;
442 	snd_soc_write(codec, WM8993_FLL_CONTROL_5, reg5);
443 
444 	/* Enable the FLL */
445 	snd_soc_write(codec, WM8993_FLL_CONTROL_1, reg1 | WM8993_FLL_ENA);
446 
447 	dev_dbg(codec->dev, "FLL enabled at %dHz->%dHz\n", Fref, Fout);
448 
449 	wm8993->fll_fref = Fref;
450 	wm8993->fll_fout = Fout;
451 	wm8993->fll_src = source;
452 
453 	return 0;
454 }
455 
456 static int wm8993_set_fll(struct snd_soc_dai *dai, int fll_id, int source,
457 			  unsigned int Fref, unsigned int Fout)
458 {
459 	return _wm8993_set_fll(dai->codec, fll_id, source, Fref, Fout);
460 }
461 
462 static int configure_clock(struct snd_soc_codec *codec)
463 {
464 	struct wm8993_priv *wm8993 = snd_soc_codec_get_drvdata(codec);
465 	unsigned int reg;
466 
467 	/* This should be done on init() for bypass paths */
468 	switch (wm8993->sysclk_source) {
469 	case WM8993_SYSCLK_MCLK:
470 		dev_dbg(codec->dev, "Using %dHz MCLK\n", wm8993->mclk_rate);
471 
472 		reg = snd_soc_read(codec, WM8993_CLOCKING_2);
473 		reg &= ~(WM8993_MCLK_DIV | WM8993_SYSCLK_SRC);
474 		if (wm8993->mclk_rate > 13500000) {
475 			reg |= WM8993_MCLK_DIV;
476 			wm8993->sysclk_rate = wm8993->mclk_rate / 2;
477 		} else {
478 			reg &= ~WM8993_MCLK_DIV;
479 			wm8993->sysclk_rate = wm8993->mclk_rate;
480 		}
481 		snd_soc_write(codec, WM8993_CLOCKING_2, reg);
482 		break;
483 
484 	case WM8993_SYSCLK_FLL:
485 		dev_dbg(codec->dev, "Using %dHz FLL clock\n",
486 			wm8993->fll_fout);
487 
488 		reg = snd_soc_read(codec, WM8993_CLOCKING_2);
489 		reg |= WM8993_SYSCLK_SRC;
490 		if (wm8993->fll_fout > 13500000) {
491 			reg |= WM8993_MCLK_DIV;
492 			wm8993->sysclk_rate = wm8993->fll_fout / 2;
493 		} else {
494 			reg &= ~WM8993_MCLK_DIV;
495 			wm8993->sysclk_rate = wm8993->fll_fout;
496 		}
497 		snd_soc_write(codec, WM8993_CLOCKING_2, reg);
498 		break;
499 
500 	default:
501 		dev_err(codec->dev, "System clock not configured\n");
502 		return -EINVAL;
503 	}
504 
505 	dev_dbg(codec->dev, "CLK_SYS is %dHz\n", wm8993->sysclk_rate);
506 
507 	return 0;
508 }
509 
510 static const DECLARE_TLV_DB_SCALE(sidetone_tlv, -3600, 300, 0);
511 static const DECLARE_TLV_DB_SCALE(drc_comp_threash, -4500, 75, 0);
512 static const DECLARE_TLV_DB_SCALE(drc_comp_amp, -2250, 75, 0);
513 static const DECLARE_TLV_DB_SCALE(drc_min_tlv, -1800, 600, 0);
514 static const unsigned int drc_max_tlv[] = {
515 	TLV_DB_RANGE_HEAD(4),
516 	0, 2, TLV_DB_SCALE_ITEM(1200, 600, 0),
517 	3, 3, TLV_DB_SCALE_ITEM(3600, 0, 0),
518 };
519 static const DECLARE_TLV_DB_SCALE(drc_qr_tlv, 1200, 600, 0);
520 static const DECLARE_TLV_DB_SCALE(drc_startup_tlv, -1800, 300, 0);
521 static const DECLARE_TLV_DB_SCALE(eq_tlv, -1200, 100, 0);
522 static const DECLARE_TLV_DB_SCALE(digital_tlv, -7200, 75, 1);
523 static const DECLARE_TLV_DB_SCALE(dac_boost_tlv, 0, 600, 0);
524 
525 static const char *dac_deemph_text[] = {
526 	"None",
527 	"32kHz",
528 	"44.1kHz",
529 	"48kHz",
530 };
531 
532 static const struct soc_enum dac_deemph =
533 	SOC_ENUM_SINGLE(WM8993_DAC_CTRL, 4, 4, dac_deemph_text);
534 
535 static const char *adc_hpf_text[] = {
536 	"Hi-Fi",
537 	"Voice 1",
538 	"Voice 2",
539 	"Voice 3",
540 };
541 
542 static const struct soc_enum adc_hpf =
543 	SOC_ENUM_SINGLE(WM8993_ADC_CTRL, 5, 4, adc_hpf_text);
544 
545 static const char *drc_path_text[] = {
546 	"ADC",
547 	"DAC"
548 };
549 
550 static const struct soc_enum drc_path =
551 	SOC_ENUM_SINGLE(WM8993_DRC_CONTROL_1, 14, 2, drc_path_text);
552 
553 static const char *drc_r0_text[] = {
554 	"1",
555 	"1/2",
556 	"1/4",
557 	"1/8",
558 	"1/16",
559 	"0",
560 };
561 
562 static const struct soc_enum drc_r0 =
563 	SOC_ENUM_SINGLE(WM8993_DRC_CONTROL_3, 8, 6, drc_r0_text);
564 
565 static const char *drc_r1_text[] = {
566 	"1",
567 	"1/2",
568 	"1/4",
569 	"1/8",
570 	"0",
571 };
572 
573 static const struct soc_enum drc_r1 =
574 	SOC_ENUM_SINGLE(WM8993_DRC_CONTROL_4, 13, 5, drc_r1_text);
575 
576 static const char *drc_attack_text[] = {
577 	"Reserved",
578 	"181us",
579 	"363us",
580 	"726us",
581 	"1.45ms",
582 	"2.9ms",
583 	"5.8ms",
584 	"11.6ms",
585 	"23.2ms",
586 	"46.4ms",
587 	"92.8ms",
588 	"185.6ms",
589 };
590 
591 static const struct soc_enum drc_attack =
592 	SOC_ENUM_SINGLE(WM8993_DRC_CONTROL_2, 12, 12, drc_attack_text);
593 
594 static const char *drc_decay_text[] = {
595 	"186ms",
596 	"372ms",
597 	"743ms",
598 	"1.49s",
599 	"2.97ms",
600 	"5.94ms",
601 	"11.89ms",
602 	"23.78ms",
603 	"47.56ms",
604 };
605 
606 static const struct soc_enum drc_decay =
607 	SOC_ENUM_SINGLE(WM8993_DRC_CONTROL_2, 8, 9, drc_decay_text);
608 
609 static const char *drc_ff_text[] = {
610 	"5 samples",
611 	"9 samples",
612 };
613 
614 static const struct soc_enum drc_ff =
615 	SOC_ENUM_SINGLE(WM8993_DRC_CONTROL_3, 7, 2, drc_ff_text);
616 
617 static const char *drc_qr_rate_text[] = {
618 	"0.725ms",
619 	"1.45ms",
620 	"5.8ms",
621 };
622 
623 static const struct soc_enum drc_qr_rate =
624 	SOC_ENUM_SINGLE(WM8993_DRC_CONTROL_3, 0, 3, drc_qr_rate_text);
625 
626 static const char *drc_smooth_text[] = {
627 	"Low",
628 	"Medium",
629 	"High",
630 };
631 
632 static const struct soc_enum drc_smooth =
633 	SOC_ENUM_SINGLE(WM8993_DRC_CONTROL_1, 4, 3, drc_smooth_text);
634 
635 static const struct snd_kcontrol_new wm8993_snd_controls[] = {
636 SOC_DOUBLE_TLV("Digital Sidetone Volume", WM8993_DIGITAL_SIDE_TONE,
637 	       5, 9, 12, 0, sidetone_tlv),
638 
639 SOC_SINGLE("DRC Switch", WM8993_DRC_CONTROL_1, 15, 1, 0),
640 SOC_ENUM("DRC Path", drc_path),
641 SOC_SINGLE_TLV("DRC Compressor Threshold Volume", WM8993_DRC_CONTROL_2,
642 	       2, 60, 1, drc_comp_threash),
643 SOC_SINGLE_TLV("DRC Compressor Amplitude Volume", WM8993_DRC_CONTROL_3,
644 	       11, 30, 1, drc_comp_amp),
645 SOC_ENUM("DRC R0", drc_r0),
646 SOC_ENUM("DRC R1", drc_r1),
647 SOC_SINGLE_TLV("DRC Minimum Volume", WM8993_DRC_CONTROL_1, 2, 3, 1,
648 	       drc_min_tlv),
649 SOC_SINGLE_TLV("DRC Maximum Volume", WM8993_DRC_CONTROL_1, 0, 3, 0,
650 	       drc_max_tlv),
651 SOC_ENUM("DRC Attack Rate", drc_attack),
652 SOC_ENUM("DRC Decay Rate", drc_decay),
653 SOC_ENUM("DRC FF Delay", drc_ff),
654 SOC_SINGLE("DRC Anti-clip Switch", WM8993_DRC_CONTROL_1, 9, 1, 0),
655 SOC_SINGLE("DRC Quick Release Switch", WM8993_DRC_CONTROL_1, 10, 1, 0),
656 SOC_SINGLE_TLV("DRC Quick Release Volume", WM8993_DRC_CONTROL_3, 2, 3, 0,
657 	       drc_qr_tlv),
658 SOC_ENUM("DRC Quick Release Rate", drc_qr_rate),
659 SOC_SINGLE("DRC Smoothing Switch", WM8993_DRC_CONTROL_1, 11, 1, 0),
660 SOC_SINGLE("DRC Smoothing Hysteresis Switch", WM8993_DRC_CONTROL_1, 8, 1, 0),
661 SOC_ENUM("DRC Smoothing Hysteresis Threshold", drc_smooth),
662 SOC_SINGLE_TLV("DRC Startup Volume", WM8993_DRC_CONTROL_4, 8, 18, 0,
663 	       drc_startup_tlv),
664 
665 SOC_SINGLE("EQ Switch", WM8993_EQ1, 0, 1, 0),
666 
667 SOC_DOUBLE_R_TLV("Capture Volume", WM8993_LEFT_ADC_DIGITAL_VOLUME,
668 		 WM8993_RIGHT_ADC_DIGITAL_VOLUME, 1, 96, 0, digital_tlv),
669 SOC_SINGLE("ADC High Pass Filter Switch", WM8993_ADC_CTRL, 8, 1, 0),
670 SOC_ENUM("ADC High Pass Filter Mode", adc_hpf),
671 
672 SOC_DOUBLE_R_TLV("Playback Volume", WM8993_LEFT_DAC_DIGITAL_VOLUME,
673 		 WM8993_RIGHT_DAC_DIGITAL_VOLUME, 1, 96, 0, digital_tlv),
674 SOC_SINGLE_TLV("Playback Boost Volume", WM8993_AUDIO_INTERFACE_2, 10, 3, 0,
675 	       dac_boost_tlv),
676 SOC_ENUM("DAC Deemphasis", dac_deemph),
677 
678 SOC_SINGLE_TLV("SPKL DAC Volume", WM8993_SPKMIXL_ATTENUATION,
679 	       2, 1, 1, wm_hubs_spkmix_tlv),
680 
681 SOC_SINGLE_TLV("SPKR DAC Volume", WM8993_SPKMIXR_ATTENUATION,
682 	       2, 1, 1, wm_hubs_spkmix_tlv),
683 };
684 
685 static const struct snd_kcontrol_new wm8993_eq_controls[] = {
686 SOC_SINGLE_TLV("EQ1 Volume", WM8993_EQ2, 0, 24, 0, eq_tlv),
687 SOC_SINGLE_TLV("EQ2 Volume", WM8993_EQ3, 0, 24, 0, eq_tlv),
688 SOC_SINGLE_TLV("EQ3 Volume", WM8993_EQ4, 0, 24, 0, eq_tlv),
689 SOC_SINGLE_TLV("EQ4 Volume", WM8993_EQ5, 0, 24, 0, eq_tlv),
690 SOC_SINGLE_TLV("EQ5 Volume", WM8993_EQ6, 0, 24, 0, eq_tlv),
691 };
692 
693 static int clk_sys_event(struct snd_soc_dapm_widget *w,
694 			 struct snd_kcontrol *kcontrol, int event)
695 {
696 	struct snd_soc_codec *codec = w->codec;
697 
698 	switch (event) {
699 	case SND_SOC_DAPM_PRE_PMU:
700 		return configure_clock(codec);
701 
702 	case SND_SOC_DAPM_POST_PMD:
703 		break;
704 	}
705 
706 	return 0;
707 }
708 
709 /*
710  * When used with DAC outputs only the WM8993 charge pump supports
711  * operation in class W mode, providing very low power consumption
712  * when used with digital sources.  Enable and disable this mode
713  * automatically depending on the mixer configuration.
714  *
715  * Currently the only supported paths are the direct DAC->headphone
716  * paths (which provide minimum power consumption anyway).
717  */
718 static int class_w_put(struct snd_kcontrol *kcontrol,
719 		       struct snd_ctl_elem_value *ucontrol)
720 {
721 	struct snd_soc_dapm_widget_list *wlist = snd_kcontrol_chip(kcontrol);
722 	struct snd_soc_dapm_widget *widget = wlist->widgets[0];
723 	struct snd_soc_codec *codec = widget->codec;
724 	struct wm8993_priv *wm8993 = snd_soc_codec_get_drvdata(codec);
725 	int ret;
726 
727 	/* Turn it off if we're using the main output mixer */
728 	if (ucontrol->value.integer.value[0] == 0) {
729 		if (wm8993->class_w_users == 0) {
730 			dev_dbg(codec->dev, "Disabling Class W\n");
731 			snd_soc_update_bits(codec, WM8993_CLASS_W_0,
732 					    WM8993_CP_DYN_FREQ |
733 					    WM8993_CP_DYN_V,
734 					    0);
735 		}
736 		wm8993->class_w_users++;
737 		wm8993->hubs_data.class_w = true;
738 	}
739 
740 	/* Implement the change */
741 	ret = snd_soc_dapm_put_enum_double(kcontrol, ucontrol);
742 
743 	/* Enable it if we're using the direct DAC path */
744 	if (ucontrol->value.integer.value[0] == 1) {
745 		if (wm8993->class_w_users == 1) {
746 			dev_dbg(codec->dev, "Enabling Class W\n");
747 			snd_soc_update_bits(codec, WM8993_CLASS_W_0,
748 					    WM8993_CP_DYN_FREQ |
749 					    WM8993_CP_DYN_V,
750 					    WM8993_CP_DYN_FREQ |
751 					    WM8993_CP_DYN_V);
752 		}
753 		wm8993->class_w_users--;
754 		wm8993->hubs_data.class_w = false;
755 	}
756 
757 	dev_dbg(codec->dev, "Indirect DAC use count now %d\n",
758 		wm8993->class_w_users);
759 
760 	return ret;
761 }
762 
763 #define SOC_DAPM_ENUM_W(xname, xenum) \
764 {	.iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \
765 	.info = snd_soc_info_enum_double, \
766 	.get = snd_soc_dapm_get_enum_double, \
767 	.put = class_w_put, \
768 	.private_value = (unsigned long)&xenum }
769 
770 static const char *hp_mux_text[] = {
771 	"Mixer",
772 	"DAC",
773 };
774 
775 static const struct soc_enum hpl_enum =
776 	SOC_ENUM_SINGLE(WM8993_OUTPUT_MIXER1, 8, 2, hp_mux_text);
777 
778 static const struct snd_kcontrol_new hpl_mux =
779 	SOC_DAPM_ENUM_W("Left Headphone Mux", hpl_enum);
780 
781 static const struct soc_enum hpr_enum =
782 	SOC_ENUM_SINGLE(WM8993_OUTPUT_MIXER2, 8, 2, hp_mux_text);
783 
784 static const struct snd_kcontrol_new hpr_mux =
785 	SOC_DAPM_ENUM_W("Right Headphone Mux", hpr_enum);
786 
787 static const struct snd_kcontrol_new left_speaker_mixer[] = {
788 SOC_DAPM_SINGLE("Input Switch", WM8993_SPEAKER_MIXER, 7, 1, 0),
789 SOC_DAPM_SINGLE("IN1LP Switch", WM8993_SPEAKER_MIXER, 5, 1, 0),
790 SOC_DAPM_SINGLE("Output Switch", WM8993_SPEAKER_MIXER, 3, 1, 0),
791 SOC_DAPM_SINGLE("DAC Switch", WM8993_SPEAKER_MIXER, 6, 1, 0),
792 };
793 
794 static const struct snd_kcontrol_new right_speaker_mixer[] = {
795 SOC_DAPM_SINGLE("Input Switch", WM8993_SPEAKER_MIXER, 6, 1, 0),
796 SOC_DAPM_SINGLE("IN1RP Switch", WM8993_SPEAKER_MIXER, 4, 1, 0),
797 SOC_DAPM_SINGLE("Output Switch", WM8993_SPEAKER_MIXER, 2, 1, 0),
798 SOC_DAPM_SINGLE("DAC Switch", WM8993_SPEAKER_MIXER, 0, 1, 0),
799 };
800 
801 static const char *aif_text[] = {
802 	"Left", "Right"
803 };
804 
805 static const struct soc_enum aifoutl_enum =
806 	SOC_ENUM_SINGLE(WM8993_AUDIO_INTERFACE_1, 15, 2, aif_text);
807 
808 static const struct snd_kcontrol_new aifoutl_mux =
809 	SOC_DAPM_ENUM("AIFOUTL Mux", aifoutl_enum);
810 
811 static const struct soc_enum aifoutr_enum =
812 	SOC_ENUM_SINGLE(WM8993_AUDIO_INTERFACE_1, 14, 2, aif_text);
813 
814 static const struct snd_kcontrol_new aifoutr_mux =
815 	SOC_DAPM_ENUM("AIFOUTR Mux", aifoutr_enum);
816 
817 static const struct soc_enum aifinl_enum =
818 	SOC_ENUM_SINGLE(WM8993_AUDIO_INTERFACE_2, 15, 2, aif_text);
819 
820 static const struct snd_kcontrol_new aifinl_mux =
821 	SOC_DAPM_ENUM("AIFINL Mux", aifinl_enum);
822 
823 static const struct soc_enum aifinr_enum =
824 	SOC_ENUM_SINGLE(WM8993_AUDIO_INTERFACE_2, 14, 2, aif_text);
825 
826 static const struct snd_kcontrol_new aifinr_mux =
827 	SOC_DAPM_ENUM("AIFINR Mux", aifinr_enum);
828 
829 static const char *sidetone_text[] = {
830 	"None", "Left", "Right"
831 };
832 
833 static const struct soc_enum sidetonel_enum =
834 	SOC_ENUM_SINGLE(WM8993_DIGITAL_SIDE_TONE, 2, 3, sidetone_text);
835 
836 static const struct snd_kcontrol_new sidetonel_mux =
837 	SOC_DAPM_ENUM("Left Sidetone", sidetonel_enum);
838 
839 static const struct soc_enum sidetoner_enum =
840 	SOC_ENUM_SINGLE(WM8993_DIGITAL_SIDE_TONE, 0, 3, sidetone_text);
841 
842 static const struct snd_kcontrol_new sidetoner_mux =
843 	SOC_DAPM_ENUM("Right Sidetone", sidetoner_enum);
844 
845 static const struct snd_soc_dapm_widget wm8993_dapm_widgets[] = {
846 SND_SOC_DAPM_SUPPLY("CLK_SYS", WM8993_BUS_CONTROL_1, 1, 0, clk_sys_event,
847 		    SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD),
848 SND_SOC_DAPM_SUPPLY("TOCLK", WM8993_CLOCKING_1, 14, 0, NULL, 0),
849 SND_SOC_DAPM_SUPPLY("CLK_DSP", WM8993_CLOCKING_3, 0, 0, NULL, 0),
850 
851 SND_SOC_DAPM_ADC("ADCL", NULL, WM8993_POWER_MANAGEMENT_2, 1, 0),
852 SND_SOC_DAPM_ADC("ADCR", NULL, WM8993_POWER_MANAGEMENT_2, 0, 0),
853 
854 SND_SOC_DAPM_MUX("AIFOUTL Mux", SND_SOC_NOPM, 0, 0, &aifoutl_mux),
855 SND_SOC_DAPM_MUX("AIFOUTR Mux", SND_SOC_NOPM, 0, 0, &aifoutr_mux),
856 
857 SND_SOC_DAPM_AIF_OUT("AIFOUTL", "Capture", 0, SND_SOC_NOPM, 0, 0),
858 SND_SOC_DAPM_AIF_OUT("AIFOUTR", "Capture", 1, SND_SOC_NOPM, 0, 0),
859 
860 SND_SOC_DAPM_AIF_IN("AIFINL", "Playback", 0, SND_SOC_NOPM, 0, 0),
861 SND_SOC_DAPM_AIF_IN("AIFINR", "Playback", 1, SND_SOC_NOPM, 0, 0),
862 
863 SND_SOC_DAPM_MUX("DACL Mux", SND_SOC_NOPM, 0, 0, &aifinl_mux),
864 SND_SOC_DAPM_MUX("DACR Mux", SND_SOC_NOPM, 0, 0, &aifinr_mux),
865 
866 SND_SOC_DAPM_MUX("DACL Sidetone", SND_SOC_NOPM, 0, 0, &sidetonel_mux),
867 SND_SOC_DAPM_MUX("DACR Sidetone", SND_SOC_NOPM, 0, 0, &sidetoner_mux),
868 
869 SND_SOC_DAPM_DAC("DACL", NULL, WM8993_POWER_MANAGEMENT_3, 1, 0),
870 SND_SOC_DAPM_DAC("DACR", NULL, WM8993_POWER_MANAGEMENT_3, 0, 0),
871 
872 SND_SOC_DAPM_MUX("Left Headphone Mux", SND_SOC_NOPM, 0, 0, &hpl_mux),
873 SND_SOC_DAPM_MUX("Right Headphone Mux", SND_SOC_NOPM, 0, 0, &hpr_mux),
874 
875 SND_SOC_DAPM_MIXER("SPKL", WM8993_POWER_MANAGEMENT_3, 8, 0,
876 		   left_speaker_mixer, ARRAY_SIZE(left_speaker_mixer)),
877 SND_SOC_DAPM_MIXER("SPKR", WM8993_POWER_MANAGEMENT_3, 9, 0,
878 		   right_speaker_mixer, ARRAY_SIZE(right_speaker_mixer)),
879 SND_SOC_DAPM_PGA("Direct Voice", SND_SOC_NOPM, 0, 0, NULL, 0),
880 };
881 
882 static const struct snd_soc_dapm_route routes[] = {
883 	{ "ADCL", NULL, "CLK_SYS" },
884 	{ "ADCL", NULL, "CLK_DSP" },
885 	{ "ADCR", NULL, "CLK_SYS" },
886 	{ "ADCR", NULL, "CLK_DSP" },
887 
888 	{ "AIFOUTL Mux", "Left", "ADCL" },
889 	{ "AIFOUTL Mux", "Right", "ADCR" },
890 	{ "AIFOUTR Mux", "Left", "ADCL" },
891 	{ "AIFOUTR Mux", "Right", "ADCR" },
892 
893 	{ "AIFOUTL", NULL, "AIFOUTL Mux" },
894 	{ "AIFOUTR", NULL, "AIFOUTR Mux" },
895 
896 	{ "DACL Mux", "Left", "AIFINL" },
897 	{ "DACL Mux", "Right", "AIFINR" },
898 	{ "DACR Mux", "Left", "AIFINL" },
899 	{ "DACR Mux", "Right", "AIFINR" },
900 
901 	{ "DACL Sidetone", "Left", "ADCL" },
902 	{ "DACL Sidetone", "Right", "ADCR" },
903 	{ "DACR Sidetone", "Left", "ADCL" },
904 	{ "DACR Sidetone", "Right", "ADCR" },
905 
906 	{ "DACL", NULL, "CLK_SYS" },
907 	{ "DACL", NULL, "CLK_DSP" },
908 	{ "DACL", NULL, "DACL Mux" },
909 	{ "DACL", NULL, "DACL Sidetone" },
910 	{ "DACR", NULL, "CLK_SYS" },
911 	{ "DACR", NULL, "CLK_DSP" },
912 	{ "DACR", NULL, "DACR Mux" },
913 	{ "DACR", NULL, "DACR Sidetone" },
914 
915 	{ "Left Output Mixer", "DAC Switch", "DACL" },
916 
917 	{ "Right Output Mixer", "DAC Switch", "DACR" },
918 
919 	{ "Left Output PGA", NULL, "CLK_SYS" },
920 
921 	{ "Right Output PGA", NULL, "CLK_SYS" },
922 
923 	{ "SPKL", "DAC Switch", "DACL" },
924 	{ "SPKL", NULL, "CLK_SYS" },
925 
926 	{ "SPKR", "DAC Switch", "DACR" },
927 	{ "SPKR", NULL, "CLK_SYS" },
928 
929 	{ "Left Headphone Mux", "DAC", "DACL" },
930 	{ "Right Headphone Mux", "DAC", "DACR" },
931 };
932 
933 static void wm8993_cache_restore(struct snd_soc_codec *codec)
934 {
935 	u16 *cache = codec->reg_cache;
936 	int i;
937 
938 	if (!codec->cache_sync)
939 		return;
940 
941 	/* Reenable hardware writes */
942 	codec->cache_only = 0;
943 
944 	/* Restore the register settings */
945 	for (i = 1; i < WM8993_MAX_REGISTER; i++) {
946 		if (cache[i] == wm8993_reg_defaults[i])
947 			continue;
948 		snd_soc_write(codec, i, cache[i]);
949 	}
950 
951 	/* We're in sync again */
952 	codec->cache_sync = 0;
953 }
954 
955 static int wm8993_set_bias_level(struct snd_soc_codec *codec,
956 				 enum snd_soc_bias_level level)
957 {
958 	struct wm8993_priv *wm8993 = snd_soc_codec_get_drvdata(codec);
959 	int ret;
960 
961 	switch (level) {
962 	case SND_SOC_BIAS_ON:
963 	case SND_SOC_BIAS_PREPARE:
964 		/* VMID=2*40k */
965 		snd_soc_update_bits(codec, WM8993_POWER_MANAGEMENT_1,
966 				    WM8993_VMID_SEL_MASK, 0x2);
967 		snd_soc_update_bits(codec, WM8993_POWER_MANAGEMENT_2,
968 				    WM8993_TSHUT_ENA, WM8993_TSHUT_ENA);
969 		break;
970 
971 	case SND_SOC_BIAS_STANDBY:
972 		if (codec->dapm.bias_level == SND_SOC_BIAS_OFF) {
973 			ret = regulator_bulk_enable(ARRAY_SIZE(wm8993->supplies),
974 						    wm8993->supplies);
975 			if (ret != 0)
976 				return ret;
977 
978 			wm8993_cache_restore(codec);
979 
980 			/* Tune DC servo configuration */
981 			snd_soc_write(codec, 0x44, 3);
982 			snd_soc_write(codec, 0x56, 3);
983 			snd_soc_write(codec, 0x44, 0);
984 
985 			/* Bring up VMID with fast soft start */
986 			snd_soc_update_bits(codec, WM8993_ANTIPOP2,
987 					    WM8993_STARTUP_BIAS_ENA |
988 					    WM8993_VMID_BUF_ENA |
989 					    WM8993_VMID_RAMP_MASK |
990 					    WM8993_BIAS_SRC,
991 					    WM8993_STARTUP_BIAS_ENA |
992 					    WM8993_VMID_BUF_ENA |
993 					    WM8993_VMID_RAMP_MASK |
994 					    WM8993_BIAS_SRC);
995 
996 			/* If either line output is single ended we
997 			 * need the VMID buffer */
998 			if (!wm8993->pdata.lineout1_diff ||
999 			    !wm8993->pdata.lineout2_diff)
1000 				snd_soc_update_bits(codec, WM8993_ANTIPOP1,
1001 						 WM8993_LINEOUT_VMID_BUF_ENA,
1002 						 WM8993_LINEOUT_VMID_BUF_ENA);
1003 
1004 			/* VMID=2*40k */
1005 			snd_soc_update_bits(codec, WM8993_POWER_MANAGEMENT_1,
1006 					    WM8993_VMID_SEL_MASK |
1007 					    WM8993_BIAS_ENA,
1008 					    WM8993_BIAS_ENA | 0x2);
1009 			msleep(32);
1010 
1011 			/* Switch to normal bias */
1012 			snd_soc_update_bits(codec, WM8993_ANTIPOP2,
1013 					    WM8993_BIAS_SRC |
1014 					    WM8993_STARTUP_BIAS_ENA, 0);
1015 		}
1016 
1017 		/* VMID=2*240k */
1018 		snd_soc_update_bits(codec, WM8993_POWER_MANAGEMENT_1,
1019 				    WM8993_VMID_SEL_MASK, 0x4);
1020 
1021 		snd_soc_update_bits(codec, WM8993_POWER_MANAGEMENT_2,
1022 				    WM8993_TSHUT_ENA, 0);
1023 		break;
1024 
1025 	case SND_SOC_BIAS_OFF:
1026 		snd_soc_update_bits(codec, WM8993_ANTIPOP1,
1027 				    WM8993_LINEOUT_VMID_BUF_ENA, 0);
1028 
1029 		snd_soc_update_bits(codec, WM8993_POWER_MANAGEMENT_1,
1030 				    WM8993_VMID_SEL_MASK | WM8993_BIAS_ENA,
1031 				    0);
1032 
1033 		snd_soc_update_bits(codec, WM8993_ANTIPOP2,
1034 				    WM8993_STARTUP_BIAS_ENA |
1035 				    WM8993_VMID_BUF_ENA |
1036 				    WM8993_VMID_RAMP_MASK |
1037 				    WM8993_BIAS_SRC, 0);
1038 
1039 #ifdef CONFIG_REGULATOR
1040                /* Post 2.6.34 we will be able to get a callback when
1041                 * the regulators are disabled which we can use but
1042 		* for now just assume that the power will be cut if
1043 		* the regulator API is in use.
1044 		*/
1045 		codec->cache_sync = 1;
1046 #endif
1047 
1048 		regulator_bulk_disable(ARRAY_SIZE(wm8993->supplies),
1049 				       wm8993->supplies);
1050 		break;
1051 	}
1052 
1053 	codec->dapm.bias_level = level;
1054 
1055 	return 0;
1056 }
1057 
1058 static int wm8993_set_sysclk(struct snd_soc_dai *codec_dai,
1059 			     int clk_id, unsigned int freq, int dir)
1060 {
1061 	struct snd_soc_codec *codec = codec_dai->codec;
1062 	struct wm8993_priv *wm8993 = snd_soc_codec_get_drvdata(codec);
1063 
1064 	switch (clk_id) {
1065 	case WM8993_SYSCLK_MCLK:
1066 		wm8993->mclk_rate = freq;
1067 	case WM8993_SYSCLK_FLL:
1068 		wm8993->sysclk_source = clk_id;
1069 		break;
1070 
1071 	default:
1072 		return -EINVAL;
1073 	}
1074 
1075 	return 0;
1076 }
1077 
1078 static int wm8993_set_dai_fmt(struct snd_soc_dai *dai,
1079 			      unsigned int fmt)
1080 {
1081 	struct snd_soc_codec *codec = dai->codec;
1082 	struct wm8993_priv *wm8993 = snd_soc_codec_get_drvdata(codec);
1083 	unsigned int aif1 = snd_soc_read(codec, WM8993_AUDIO_INTERFACE_1);
1084 	unsigned int aif4 = snd_soc_read(codec, WM8993_AUDIO_INTERFACE_4);
1085 
1086 	aif1 &= ~(WM8993_BCLK_DIR | WM8993_AIF_BCLK_INV |
1087 		  WM8993_AIF_LRCLK_INV | WM8993_AIF_FMT_MASK);
1088 	aif4 &= ~WM8993_LRCLK_DIR;
1089 
1090 	switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
1091 	case SND_SOC_DAIFMT_CBS_CFS:
1092 		wm8993->master = 0;
1093 		break;
1094 	case SND_SOC_DAIFMT_CBS_CFM:
1095 		aif4 |= WM8993_LRCLK_DIR;
1096 		wm8993->master = 1;
1097 		break;
1098 	case SND_SOC_DAIFMT_CBM_CFS:
1099 		aif1 |= WM8993_BCLK_DIR;
1100 		wm8993->master = 1;
1101 		break;
1102 	case SND_SOC_DAIFMT_CBM_CFM:
1103 		aif1 |= WM8993_BCLK_DIR;
1104 		aif4 |= WM8993_LRCLK_DIR;
1105 		wm8993->master = 1;
1106 		break;
1107 	default:
1108 		return -EINVAL;
1109 	}
1110 
1111 	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
1112 	case SND_SOC_DAIFMT_DSP_B:
1113 		aif1 |= WM8993_AIF_LRCLK_INV;
1114 	case SND_SOC_DAIFMT_DSP_A:
1115 		aif1 |= 0x18;
1116 		break;
1117 	case SND_SOC_DAIFMT_I2S:
1118 		aif1 |= 0x10;
1119 		break;
1120 	case SND_SOC_DAIFMT_RIGHT_J:
1121 		break;
1122 	case SND_SOC_DAIFMT_LEFT_J:
1123 		aif1 |= 0x8;
1124 		break;
1125 	default:
1126 		return -EINVAL;
1127 	}
1128 
1129 	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
1130 	case SND_SOC_DAIFMT_DSP_A:
1131 	case SND_SOC_DAIFMT_DSP_B:
1132 		/* frame inversion not valid for DSP modes */
1133 		switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
1134 		case SND_SOC_DAIFMT_NB_NF:
1135 			break;
1136 		case SND_SOC_DAIFMT_IB_NF:
1137 			aif1 |= WM8993_AIF_BCLK_INV;
1138 			break;
1139 		default:
1140 			return -EINVAL;
1141 		}
1142 		break;
1143 
1144 	case SND_SOC_DAIFMT_I2S:
1145 	case SND_SOC_DAIFMT_RIGHT_J:
1146 	case SND_SOC_DAIFMT_LEFT_J:
1147 		switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
1148 		case SND_SOC_DAIFMT_NB_NF:
1149 			break;
1150 		case SND_SOC_DAIFMT_IB_IF:
1151 			aif1 |= WM8993_AIF_BCLK_INV | WM8993_AIF_LRCLK_INV;
1152 			break;
1153 		case SND_SOC_DAIFMT_IB_NF:
1154 			aif1 |= WM8993_AIF_BCLK_INV;
1155 			break;
1156 		case SND_SOC_DAIFMT_NB_IF:
1157 			aif1 |= WM8993_AIF_LRCLK_INV;
1158 			break;
1159 		default:
1160 			return -EINVAL;
1161 		}
1162 		break;
1163 	default:
1164 		return -EINVAL;
1165 	}
1166 
1167 	snd_soc_write(codec, WM8993_AUDIO_INTERFACE_1, aif1);
1168 	snd_soc_write(codec, WM8993_AUDIO_INTERFACE_4, aif4);
1169 
1170 	return 0;
1171 }
1172 
1173 static int wm8993_hw_params(struct snd_pcm_substream *substream,
1174 			    struct snd_pcm_hw_params *params,
1175 			    struct snd_soc_dai *dai)
1176 {
1177 	struct snd_soc_codec *codec = dai->codec;
1178 	struct wm8993_priv *wm8993 = snd_soc_codec_get_drvdata(codec);
1179 	int ret, i, best, best_val, cur_val;
1180 	unsigned int clocking1, clocking3, aif1, aif4;
1181 
1182 	clocking1 = snd_soc_read(codec, WM8993_CLOCKING_1);
1183 	clocking1 &= ~WM8993_BCLK_DIV_MASK;
1184 
1185 	clocking3 = snd_soc_read(codec, WM8993_CLOCKING_3);
1186 	clocking3 &= ~(WM8993_CLK_SYS_RATE_MASK | WM8993_SAMPLE_RATE_MASK);
1187 
1188 	aif1 = snd_soc_read(codec, WM8993_AUDIO_INTERFACE_1);
1189 	aif1 &= ~WM8993_AIF_WL_MASK;
1190 
1191 	aif4 = snd_soc_read(codec, WM8993_AUDIO_INTERFACE_4);
1192 	aif4 &= ~WM8993_LRCLK_RATE_MASK;
1193 
1194 	/* What BCLK do we need? */
1195 	wm8993->fs = params_rate(params);
1196 	wm8993->bclk = 2 * wm8993->fs;
1197 	if (wm8993->tdm_slots) {
1198 		dev_dbg(codec->dev, "Configuring for %d %d bit TDM slots\n",
1199 			wm8993->tdm_slots, wm8993->tdm_width);
1200 		wm8993->bclk *= wm8993->tdm_width * wm8993->tdm_slots;
1201 	} else {
1202 		switch (params_format(params)) {
1203 		case SNDRV_PCM_FORMAT_S16_LE:
1204 			wm8993->bclk *= 16;
1205 			break;
1206 		case SNDRV_PCM_FORMAT_S20_3LE:
1207 			wm8993->bclk *= 20;
1208 			aif1 |= 0x8;
1209 			break;
1210 		case SNDRV_PCM_FORMAT_S24_LE:
1211 			wm8993->bclk *= 24;
1212 			aif1 |= 0x10;
1213 			break;
1214 		case SNDRV_PCM_FORMAT_S32_LE:
1215 			wm8993->bclk *= 32;
1216 			aif1 |= 0x18;
1217 			break;
1218 		default:
1219 			return -EINVAL;
1220 		}
1221 	}
1222 
1223 	dev_dbg(codec->dev, "Target BCLK is %dHz\n", wm8993->bclk);
1224 
1225 	ret = configure_clock(codec);
1226 	if (ret != 0)
1227 		return ret;
1228 
1229 	/* Select nearest CLK_SYS_RATE */
1230 	best = 0;
1231 	best_val = abs((wm8993->sysclk_rate / clk_sys_rates[0].ratio)
1232 		       - wm8993->fs);
1233 	for (i = 1; i < ARRAY_SIZE(clk_sys_rates); i++) {
1234 		cur_val = abs((wm8993->sysclk_rate /
1235 			       clk_sys_rates[i].ratio) - wm8993->fs);
1236 		if (cur_val < best_val) {
1237 			best = i;
1238 			best_val = cur_val;
1239 		}
1240 	}
1241 	dev_dbg(codec->dev, "Selected CLK_SYS_RATIO of %d\n",
1242 		clk_sys_rates[best].ratio);
1243 	clocking3 |= (clk_sys_rates[best].clk_sys_rate
1244 		      << WM8993_CLK_SYS_RATE_SHIFT);
1245 
1246 	/* SAMPLE_RATE */
1247 	best = 0;
1248 	best_val = abs(wm8993->fs - sample_rates[0].rate);
1249 	for (i = 1; i < ARRAY_SIZE(sample_rates); i++) {
1250 		/* Closest match */
1251 		cur_val = abs(wm8993->fs - sample_rates[i].rate);
1252 		if (cur_val < best_val) {
1253 			best = i;
1254 			best_val = cur_val;
1255 		}
1256 	}
1257 	dev_dbg(codec->dev, "Selected SAMPLE_RATE of %dHz\n",
1258 		sample_rates[best].rate);
1259 	clocking3 |= (sample_rates[best].sample_rate
1260 		      << WM8993_SAMPLE_RATE_SHIFT);
1261 
1262 	/* BCLK_DIV */
1263 	best = 0;
1264 	best_val = INT_MAX;
1265 	for (i = 0; i < ARRAY_SIZE(bclk_divs); i++) {
1266 		cur_val = ((wm8993->sysclk_rate * 10) / bclk_divs[i].div)
1267 			- wm8993->bclk;
1268 		if (cur_val < 0) /* Table is sorted */
1269 			break;
1270 		if (cur_val < best_val) {
1271 			best = i;
1272 			best_val = cur_val;
1273 		}
1274 	}
1275 	wm8993->bclk = (wm8993->sysclk_rate * 10) / bclk_divs[best].div;
1276 	dev_dbg(codec->dev, "Selected BCLK_DIV of %d for %dHz BCLK\n",
1277 		bclk_divs[best].div, wm8993->bclk);
1278 	clocking1 |= bclk_divs[best].bclk_div << WM8993_BCLK_DIV_SHIFT;
1279 
1280 	/* LRCLK is a simple fraction of BCLK */
1281 	dev_dbg(codec->dev, "LRCLK_RATE is %d\n", wm8993->bclk / wm8993->fs);
1282 	aif4 |= wm8993->bclk / wm8993->fs;
1283 
1284 	snd_soc_write(codec, WM8993_CLOCKING_1, clocking1);
1285 	snd_soc_write(codec, WM8993_CLOCKING_3, clocking3);
1286 	snd_soc_write(codec, WM8993_AUDIO_INTERFACE_1, aif1);
1287 	snd_soc_write(codec, WM8993_AUDIO_INTERFACE_4, aif4);
1288 
1289 	/* ReTune Mobile? */
1290 	if (wm8993->pdata.num_retune_configs) {
1291 		u16 eq1 = snd_soc_read(codec, WM8993_EQ1);
1292 		struct wm8993_retune_mobile_setting *s;
1293 
1294 		best = 0;
1295 		best_val = abs(wm8993->pdata.retune_configs[0].rate
1296 			       - wm8993->fs);
1297 		for (i = 0; i < wm8993->pdata.num_retune_configs; i++) {
1298 			cur_val = abs(wm8993->pdata.retune_configs[i].rate
1299 				      - wm8993->fs);
1300 			if (cur_val < best_val) {
1301 				best_val = cur_val;
1302 				best = i;
1303 			}
1304 		}
1305 		s = &wm8993->pdata.retune_configs[best];
1306 
1307 		dev_dbg(codec->dev, "ReTune Mobile %s tuned for %dHz\n",
1308 			s->name, s->rate);
1309 
1310 		/* Disable EQ while we reconfigure */
1311 		snd_soc_update_bits(codec, WM8993_EQ1, WM8993_EQ_ENA, 0);
1312 
1313 		for (i = 1; i < ARRAY_SIZE(s->config); i++)
1314 			snd_soc_write(codec, WM8993_EQ1 + i, s->config[i]);
1315 
1316 		snd_soc_update_bits(codec, WM8993_EQ1, WM8993_EQ_ENA, eq1);
1317 	}
1318 
1319 	return 0;
1320 }
1321 
1322 static int wm8993_digital_mute(struct snd_soc_dai *codec_dai, int mute)
1323 {
1324 	struct snd_soc_codec *codec = codec_dai->codec;
1325 	unsigned int reg;
1326 
1327 	reg = snd_soc_read(codec, WM8993_DAC_CTRL);
1328 
1329 	if (mute)
1330 		reg |= WM8993_DAC_MUTE;
1331 	else
1332 		reg &= ~WM8993_DAC_MUTE;
1333 
1334 	snd_soc_write(codec, WM8993_DAC_CTRL, reg);
1335 
1336 	return 0;
1337 }
1338 
1339 static int wm8993_set_tdm_slot(struct snd_soc_dai *dai, unsigned int tx_mask,
1340 			       unsigned int rx_mask, int slots, int slot_width)
1341 {
1342 	struct snd_soc_codec *codec = dai->codec;
1343 	struct wm8993_priv *wm8993 = snd_soc_codec_get_drvdata(codec);
1344 	int aif1 = 0;
1345 	int aif2 = 0;
1346 
1347 	/* Don't need to validate anything if we're turning off TDM */
1348 	if (slots == 0) {
1349 		wm8993->tdm_slots = 0;
1350 		goto out;
1351 	}
1352 
1353 	/* Note that we allow configurations we can't handle ourselves -
1354 	 * for example, we can generate clocks for slots 2 and up even if
1355 	 * we can't use those slots ourselves.
1356 	 */
1357 	aif1 |= WM8993_AIFADC_TDM;
1358 	aif2 |= WM8993_AIFDAC_TDM;
1359 
1360 	switch (rx_mask) {
1361 	case 3:
1362 		break;
1363 	case 0xc:
1364 		aif1 |= WM8993_AIFADC_TDM_CHAN;
1365 		break;
1366 	default:
1367 		return -EINVAL;
1368 	}
1369 
1370 
1371 	switch (tx_mask) {
1372 	case 3:
1373 		break;
1374 	case 0xc:
1375 		aif2 |= WM8993_AIFDAC_TDM_CHAN;
1376 		break;
1377 	default:
1378 		return -EINVAL;
1379 	}
1380 
1381 out:
1382 	wm8993->tdm_width = slot_width;
1383 	wm8993->tdm_slots = slots / 2;
1384 
1385 	snd_soc_update_bits(codec, WM8993_AUDIO_INTERFACE_1,
1386 			    WM8993_AIFADC_TDM | WM8993_AIFADC_TDM_CHAN, aif1);
1387 	snd_soc_update_bits(codec, WM8993_AUDIO_INTERFACE_2,
1388 			    WM8993_AIFDAC_TDM | WM8993_AIFDAC_TDM_CHAN, aif2);
1389 
1390 	return 0;
1391 }
1392 
1393 static struct snd_soc_dai_ops wm8993_ops = {
1394 	.set_sysclk = wm8993_set_sysclk,
1395 	.set_fmt = wm8993_set_dai_fmt,
1396 	.hw_params = wm8993_hw_params,
1397 	.digital_mute = wm8993_digital_mute,
1398 	.set_pll = wm8993_set_fll,
1399 	.set_tdm_slot = wm8993_set_tdm_slot,
1400 };
1401 
1402 #define WM8993_RATES SNDRV_PCM_RATE_8000_48000
1403 
1404 #define WM8993_FORMATS (SNDRV_PCM_FMTBIT_S16_LE |\
1405 			SNDRV_PCM_FMTBIT_S20_3LE |\
1406 			SNDRV_PCM_FMTBIT_S24_LE |\
1407 			SNDRV_PCM_FMTBIT_S32_LE)
1408 
1409 static struct snd_soc_dai_driver wm8993_dai = {
1410 	.name = "wm8993-hifi",
1411 	.playback = {
1412 		.stream_name = "Playback",
1413 		.channels_min = 1,
1414 		.channels_max = 2,
1415 		.rates = WM8993_RATES,
1416 		.formats = WM8993_FORMATS,
1417 	},
1418 	.capture = {
1419 		 .stream_name = "Capture",
1420 		 .channels_min = 1,
1421 		 .channels_max = 2,
1422 		 .rates = WM8993_RATES,
1423 		 .formats = WM8993_FORMATS,
1424 	 },
1425 	.ops = &wm8993_ops,
1426 	.symmetric_rates = 1,
1427 };
1428 
1429 static int wm8993_probe(struct snd_soc_codec *codec)
1430 {
1431 	struct wm8993_priv *wm8993 = snd_soc_codec_get_drvdata(codec);
1432 	struct snd_soc_dapm_context *dapm = &codec->dapm;
1433 	int ret, i, val;
1434 
1435 	wm8993->hubs_data.hp_startup_mode = 1;
1436 	wm8993->hubs_data.dcs_codes = -2;
1437 	wm8993->hubs_data.series_startup = 1;
1438 
1439 	ret = snd_soc_codec_set_cache_io(codec, 8, 16, SND_SOC_I2C);
1440 	if (ret != 0) {
1441 		dev_err(codec->dev, "Failed to set cache I/O: %d\n", ret);
1442 		return ret;
1443 	}
1444 
1445 	for (i = 0; i < ARRAY_SIZE(wm8993->supplies); i++)
1446 		wm8993->supplies[i].supply = wm8993_supply_names[i];
1447 
1448 	ret = regulator_bulk_get(codec->dev, ARRAY_SIZE(wm8993->supplies),
1449 				 wm8993->supplies);
1450 	if (ret != 0) {
1451 		dev_err(codec->dev, "Failed to request supplies: %d\n", ret);
1452 		return ret;
1453 	}
1454 
1455 	ret = regulator_bulk_enable(ARRAY_SIZE(wm8993->supplies),
1456 				    wm8993->supplies);
1457 	if (ret != 0) {
1458 		dev_err(codec->dev, "Failed to enable supplies: %d\n", ret);
1459 		goto err_get;
1460 	}
1461 
1462 	val = snd_soc_read(codec, WM8993_SOFTWARE_RESET);
1463 	if (val != wm8993_reg_defaults[WM8993_SOFTWARE_RESET]) {
1464 		dev_err(codec->dev, "Invalid ID register value %x\n", val);
1465 		ret = -EINVAL;
1466 		goto err_enable;
1467 	}
1468 
1469 	ret = snd_soc_write(codec, WM8993_SOFTWARE_RESET, 0xffff);
1470 	if (ret != 0)
1471 		goto err_enable;
1472 
1473 	codec->cache_only = 1;
1474 
1475 	/* By default we're using the output mixers */
1476 	wm8993->class_w_users = 2;
1477 
1478 	/* Latch volume update bits and default ZC on */
1479 	snd_soc_update_bits(codec, WM8993_RIGHT_DAC_DIGITAL_VOLUME,
1480 			    WM8993_DAC_VU, WM8993_DAC_VU);
1481 	snd_soc_update_bits(codec, WM8993_RIGHT_ADC_DIGITAL_VOLUME,
1482 			    WM8993_ADC_VU, WM8993_ADC_VU);
1483 
1484 	/* Manualy manage the HPOUT sequencing for independent stereo
1485 	 * control. */
1486 	snd_soc_update_bits(codec, WM8993_ANALOGUE_HP_0,
1487 			    WM8993_HPOUT1_AUTO_PU, 0);
1488 
1489 	/* Use automatic clock configuration */
1490 	snd_soc_update_bits(codec, WM8993_CLOCKING_4, WM8993_SR_MODE, 0);
1491 
1492 	wm_hubs_handle_analogue_pdata(codec, wm8993->pdata.lineout1_diff,
1493 				      wm8993->pdata.lineout2_diff,
1494 				      wm8993->pdata.lineout1fb,
1495 				      wm8993->pdata.lineout2fb,
1496 				      wm8993->pdata.jd_scthr,
1497 				      wm8993->pdata.jd_thr,
1498 				      wm8993->pdata.micbias1_lvl,
1499 				      wm8993->pdata.micbias2_lvl);
1500 
1501 	ret = wm8993_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
1502 	if (ret != 0)
1503 		goto err_enable;
1504 
1505 	snd_soc_add_controls(codec, wm8993_snd_controls,
1506 			     ARRAY_SIZE(wm8993_snd_controls));
1507 	if (wm8993->pdata.num_retune_configs != 0) {
1508 		dev_dbg(codec->dev, "Using ReTune Mobile\n");
1509 	} else {
1510 		dev_dbg(codec->dev, "No ReTune Mobile, using normal EQ\n");
1511 		snd_soc_add_controls(codec, wm8993_eq_controls,
1512 				     ARRAY_SIZE(wm8993_eq_controls));
1513 	}
1514 
1515 	snd_soc_dapm_new_controls(dapm, wm8993_dapm_widgets,
1516 				  ARRAY_SIZE(wm8993_dapm_widgets));
1517 	wm_hubs_add_analogue_controls(codec);
1518 
1519 	snd_soc_dapm_add_routes(dapm, routes, ARRAY_SIZE(routes));
1520 	wm_hubs_add_analogue_routes(codec, wm8993->pdata.lineout1_diff,
1521 				    wm8993->pdata.lineout2_diff);
1522 
1523 	return 0;
1524 
1525 err_enable:
1526 	regulator_bulk_disable(ARRAY_SIZE(wm8993->supplies), wm8993->supplies);
1527 err_get:
1528 	regulator_bulk_free(ARRAY_SIZE(wm8993->supplies), wm8993->supplies);
1529 	return ret;
1530 }
1531 
1532 static int wm8993_remove(struct snd_soc_codec *codec)
1533 {
1534 	struct wm8993_priv *wm8993 = snd_soc_codec_get_drvdata(codec);
1535 
1536 	wm8993_set_bias_level(codec, SND_SOC_BIAS_OFF);
1537 	regulator_bulk_free(ARRAY_SIZE(wm8993->supplies), wm8993->supplies);
1538 	return 0;
1539 }
1540 
1541 #ifdef CONFIG_PM
1542 static int wm8993_suspend(struct snd_soc_codec *codec, pm_message_t state)
1543 {
1544 	struct wm8993_priv *wm8993 = snd_soc_codec_get_drvdata(codec);
1545 	int fll_fout = wm8993->fll_fout;
1546 	int fll_fref  = wm8993->fll_fref;
1547 	int ret;
1548 
1549 	/* Stop the FLL in an orderly fashion */
1550 	ret = _wm8993_set_fll(codec, 0, 0, 0, 0);
1551 	if (ret != 0) {
1552 		dev_err(codec->dev, "Failed to stop FLL\n");
1553 		return ret;
1554 	}
1555 
1556 	wm8993->fll_fout = fll_fout;
1557 	wm8993->fll_fref = fll_fref;
1558 
1559 	wm8993_set_bias_level(codec, SND_SOC_BIAS_OFF);
1560 
1561 	return 0;
1562 }
1563 
1564 static int wm8993_resume(struct snd_soc_codec *codec)
1565 {
1566 	struct wm8993_priv *wm8993 = snd_soc_codec_get_drvdata(codec);
1567 	int ret;
1568 
1569 	wm8993_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
1570 
1571 	/* Restart the FLL? */
1572 	if (wm8993->fll_fout) {
1573 		int fll_fout = wm8993->fll_fout;
1574 		int fll_fref  = wm8993->fll_fref;
1575 
1576 		wm8993->fll_fref = 0;
1577 		wm8993->fll_fout = 0;
1578 
1579 		ret = _wm8993_set_fll(codec, 0, wm8993->fll_src,
1580 				     fll_fref, fll_fout);
1581 		if (ret != 0)
1582 			dev_err(codec->dev, "Failed to restart FLL\n");
1583 	}
1584 
1585 	return 0;
1586 }
1587 #else
1588 #define wm8993_suspend NULL
1589 #define wm8993_resume NULL
1590 #endif
1591 
1592 static struct snd_soc_codec_driver soc_codec_dev_wm8993 = {
1593 	.probe = 	wm8993_probe,
1594 	.remove = 	wm8993_remove,
1595 	.suspend =	wm8993_suspend,
1596 	.resume =	wm8993_resume,
1597 	.set_bias_level = wm8993_set_bias_level,
1598 	.reg_cache_size = ARRAY_SIZE(wm8993_reg_defaults),
1599 	.reg_word_size = sizeof(u16),
1600 	.reg_cache_default = wm8993_reg_defaults,
1601 	.volatile_register = wm8993_volatile,
1602 };
1603 
1604 #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
1605 static __devinit int wm8993_i2c_probe(struct i2c_client *i2c,
1606 				      const struct i2c_device_id *id)
1607 {
1608 	struct wm8993_priv *wm8993;
1609 	int ret;
1610 
1611 	wm8993 = kzalloc(sizeof(struct wm8993_priv), GFP_KERNEL);
1612 	if (wm8993 == NULL)
1613 		return -ENOMEM;
1614 
1615 	i2c_set_clientdata(i2c, wm8993);
1616 
1617 	ret = snd_soc_register_codec(&i2c->dev,
1618 			&soc_codec_dev_wm8993, &wm8993_dai, 1);
1619 	if (ret < 0)
1620 		kfree(wm8993);
1621 	return ret;
1622 }
1623 
1624 static __devexit int wm8993_i2c_remove(struct i2c_client *client)
1625 {
1626 	snd_soc_unregister_codec(&client->dev);
1627 	kfree(i2c_get_clientdata(client));
1628 	return 0;
1629 }
1630 
1631 static const struct i2c_device_id wm8993_i2c_id[] = {
1632 	{ "wm8993", 0 },
1633 	{ }
1634 };
1635 MODULE_DEVICE_TABLE(i2c, wm8993_i2c_id);
1636 
1637 static struct i2c_driver wm8993_i2c_driver = {
1638 	.driver = {
1639 		.name = "wm8993-codec",
1640 		.owner = THIS_MODULE,
1641 	},
1642 	.probe =    wm8993_i2c_probe,
1643 	.remove =   __devexit_p(wm8993_i2c_remove),
1644 	.id_table = wm8993_i2c_id,
1645 };
1646 #endif
1647 
1648 static int __init wm8993_modinit(void)
1649 {
1650 	int ret = 0;
1651 #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
1652 	ret = i2c_add_driver(&wm8993_i2c_driver);
1653 	if (ret != 0) {
1654 		pr_err("WM8993: Unable to register I2C driver: %d\n",
1655 		       ret);
1656 	}
1657 #endif
1658 	return ret;
1659 }
1660 module_init(wm8993_modinit);
1661 
1662 static void __exit wm8993_exit(void)
1663 {
1664 #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
1665 	i2c_del_driver(&wm8993_i2c_driver);
1666 #endif
1667 }
1668 module_exit(wm8993_exit);
1669 
1670 
1671 MODULE_DESCRIPTION("ASoC WM8993 driver");
1672 MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
1673 MODULE_LICENSE("GPL");
1674