1 /* 2 * wm8961.c -- WM8961 ALSA SoC Audio driver 3 * 4 * Copyright 2009-10 Wolfson Microelectronics, plc 5 * 6 * Author: Mark Brown 7 * 8 * This program is free software; you can redistribute it and/or modify 9 * it under the terms of the GNU General Public License version 2 as 10 * published by the Free Software Foundation. 11 * 12 * Currently unimplemented features: 13 * - ALC 14 */ 15 16 #include <linux/module.h> 17 #include <linux/moduleparam.h> 18 #include <linux/init.h> 19 #include <linux/delay.h> 20 #include <linux/pm.h> 21 #include <linux/i2c.h> 22 #include <linux/regmap.h> 23 #include <linux/slab.h> 24 #include <sound/core.h> 25 #include <sound/pcm.h> 26 #include <sound/pcm_params.h> 27 #include <sound/soc.h> 28 #include <sound/initval.h> 29 #include <sound/tlv.h> 30 31 #include "wm8961.h" 32 33 #define WM8961_MAX_REGISTER 0xFC 34 35 static const struct reg_default wm8961_reg_defaults[] = { 36 { 0, 0x009F }, /* R0 - Left Input volume */ 37 { 1, 0x009F }, /* R1 - Right Input volume */ 38 { 2, 0x0000 }, /* R2 - LOUT1 volume */ 39 { 3, 0x0000 }, /* R3 - ROUT1 volume */ 40 { 4, 0x0020 }, /* R4 - Clocking1 */ 41 { 5, 0x0008 }, /* R5 - ADC & DAC Control 1 */ 42 { 6, 0x0000 }, /* R6 - ADC & DAC Control 2 */ 43 { 7, 0x000A }, /* R7 - Audio Interface 0 */ 44 { 8, 0x01F4 }, /* R8 - Clocking2 */ 45 { 9, 0x0000 }, /* R9 - Audio Interface 1 */ 46 { 10, 0x00FF }, /* R10 - Left DAC volume */ 47 { 11, 0x00FF }, /* R11 - Right DAC volume */ 48 49 { 14, 0x0040 }, /* R14 - Audio Interface 2 */ 50 51 { 17, 0x007B }, /* R17 - ALC1 */ 52 { 18, 0x0000 }, /* R18 - ALC2 */ 53 { 19, 0x0032 }, /* R19 - ALC3 */ 54 { 20, 0x0000 }, /* R20 - Noise Gate */ 55 { 21, 0x00C0 }, /* R21 - Left ADC volume */ 56 { 22, 0x00C0 }, /* R22 - Right ADC volume */ 57 { 23, 0x0120 }, /* R23 - Additional control(1) */ 58 { 24, 0x0000 }, /* R24 - Additional control(2) */ 59 { 25, 0x0000 }, /* R25 - Pwr Mgmt (1) */ 60 { 26, 0x0000 }, /* R26 - Pwr Mgmt (2) */ 61 { 27, 0x0000 }, /* R27 - Additional Control (3) */ 62 { 28, 0x0000 }, /* R28 - Anti-pop */ 63 64 { 30, 0x005F }, /* R30 - Clocking 3 */ 65 66 { 32, 0x0000 }, /* R32 - ADCL signal path */ 67 { 33, 0x0000 }, /* R33 - ADCR signal path */ 68 69 { 40, 0x0000 }, /* R40 - LOUT2 volume */ 70 { 41, 0x0000 }, /* R41 - ROUT2 volume */ 71 72 { 47, 0x0000 }, /* R47 - Pwr Mgmt (3) */ 73 { 48, 0x0023 }, /* R48 - Additional Control (4) */ 74 { 49, 0x0000 }, /* R49 - Class D Control 1 */ 75 76 { 51, 0x0003 }, /* R51 - Class D Control 2 */ 77 78 { 56, 0x0106 }, /* R56 - Clocking 4 */ 79 { 57, 0x0000 }, /* R57 - DSP Sidetone 0 */ 80 { 58, 0x0000 }, /* R58 - DSP Sidetone 1 */ 81 82 { 60, 0x0000 }, /* R60 - DC Servo 0 */ 83 { 61, 0x0000 }, /* R61 - DC Servo 1 */ 84 85 { 63, 0x015E }, /* R63 - DC Servo 3 */ 86 87 { 65, 0x0010 }, /* R65 - DC Servo 5 */ 88 89 { 68, 0x0003 }, /* R68 - Analogue PGA Bias */ 90 { 69, 0x0000 }, /* R69 - Analogue HP 0 */ 91 92 { 71, 0x01FB }, /* R71 - Analogue HP 2 */ 93 { 72, 0x0000 }, /* R72 - Charge Pump 1 */ 94 95 { 82, 0x0000 }, /* R82 - Charge Pump B */ 96 97 { 87, 0x0000 }, /* R87 - Write Sequencer 1 */ 98 { 88, 0x0000 }, /* R88 - Write Sequencer 2 */ 99 { 89, 0x0000 }, /* R89 - Write Sequencer 3 */ 100 { 90, 0x0000 }, /* R90 - Write Sequencer 4 */ 101 { 91, 0x0000 }, /* R91 - Write Sequencer 5 */ 102 { 92, 0x0000 }, /* R92 - Write Sequencer 6 */ 103 { 93, 0x0000 }, /* R93 - Write Sequencer 7 */ 104 105 { 252, 0x0001 }, /* R252 - General test 1 */ 106 }; 107 108 struct wm8961_priv { 109 struct regmap *regmap; 110 int sysclk; 111 }; 112 113 static bool wm8961_volatile(struct device *dev, unsigned int reg) 114 { 115 switch (reg) { 116 case WM8961_SOFTWARE_RESET: 117 case WM8961_WRITE_SEQUENCER_7: 118 case WM8961_DC_SERVO_1: 119 return true; 120 121 default: 122 return false; 123 } 124 } 125 126 static bool wm8961_readable(struct device *dev, unsigned int reg) 127 { 128 switch (reg) { 129 case WM8961_LEFT_INPUT_VOLUME: 130 case WM8961_RIGHT_INPUT_VOLUME: 131 case WM8961_LOUT1_VOLUME: 132 case WM8961_ROUT1_VOLUME: 133 case WM8961_CLOCKING1: 134 case WM8961_ADC_DAC_CONTROL_1: 135 case WM8961_ADC_DAC_CONTROL_2: 136 case WM8961_AUDIO_INTERFACE_0: 137 case WM8961_CLOCKING2: 138 case WM8961_AUDIO_INTERFACE_1: 139 case WM8961_LEFT_DAC_VOLUME: 140 case WM8961_RIGHT_DAC_VOLUME: 141 case WM8961_AUDIO_INTERFACE_2: 142 case WM8961_SOFTWARE_RESET: 143 case WM8961_ALC1: 144 case WM8961_ALC2: 145 case WM8961_ALC3: 146 case WM8961_NOISE_GATE: 147 case WM8961_LEFT_ADC_VOLUME: 148 case WM8961_RIGHT_ADC_VOLUME: 149 case WM8961_ADDITIONAL_CONTROL_1: 150 case WM8961_ADDITIONAL_CONTROL_2: 151 case WM8961_PWR_MGMT_1: 152 case WM8961_PWR_MGMT_2: 153 case WM8961_ADDITIONAL_CONTROL_3: 154 case WM8961_ANTI_POP: 155 case WM8961_CLOCKING_3: 156 case WM8961_ADCL_SIGNAL_PATH: 157 case WM8961_ADCR_SIGNAL_PATH: 158 case WM8961_LOUT2_VOLUME: 159 case WM8961_ROUT2_VOLUME: 160 case WM8961_PWR_MGMT_3: 161 case WM8961_ADDITIONAL_CONTROL_4: 162 case WM8961_CLASS_D_CONTROL_1: 163 case WM8961_CLASS_D_CONTROL_2: 164 case WM8961_CLOCKING_4: 165 case WM8961_DSP_SIDETONE_0: 166 case WM8961_DSP_SIDETONE_1: 167 case WM8961_DC_SERVO_0: 168 case WM8961_DC_SERVO_1: 169 case WM8961_DC_SERVO_3: 170 case WM8961_DC_SERVO_5: 171 case WM8961_ANALOGUE_PGA_BIAS: 172 case WM8961_ANALOGUE_HP_0: 173 case WM8961_ANALOGUE_HP_2: 174 case WM8961_CHARGE_PUMP_1: 175 case WM8961_CHARGE_PUMP_B: 176 case WM8961_WRITE_SEQUENCER_1: 177 case WM8961_WRITE_SEQUENCER_2: 178 case WM8961_WRITE_SEQUENCER_3: 179 case WM8961_WRITE_SEQUENCER_4: 180 case WM8961_WRITE_SEQUENCER_5: 181 case WM8961_WRITE_SEQUENCER_6: 182 case WM8961_WRITE_SEQUENCER_7: 183 case WM8961_GENERAL_TEST_1: 184 return true; 185 default: 186 return false; 187 } 188 } 189 190 /* 191 * The headphone output supports special anti-pop sequences giving 192 * silent power up and power down. 193 */ 194 static int wm8961_hp_event(struct snd_soc_dapm_widget *w, 195 struct snd_kcontrol *kcontrol, int event) 196 { 197 struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm); 198 u16 hp_reg = snd_soc_component_read32(component, WM8961_ANALOGUE_HP_0); 199 u16 cp_reg = snd_soc_component_read32(component, WM8961_CHARGE_PUMP_1); 200 u16 pwr_reg = snd_soc_component_read32(component, WM8961_PWR_MGMT_2); 201 u16 dcs_reg = snd_soc_component_read32(component, WM8961_DC_SERVO_1); 202 int timeout = 500; 203 204 if (event & SND_SOC_DAPM_POST_PMU) { 205 /* Make sure the output is shorted */ 206 hp_reg &= ~(WM8961_HPR_RMV_SHORT | WM8961_HPL_RMV_SHORT); 207 snd_soc_component_write(component, WM8961_ANALOGUE_HP_0, hp_reg); 208 209 /* Enable the charge pump */ 210 cp_reg |= WM8961_CP_ENA; 211 snd_soc_component_write(component, WM8961_CHARGE_PUMP_1, cp_reg); 212 mdelay(5); 213 214 /* Enable the PGA */ 215 pwr_reg |= WM8961_LOUT1_PGA | WM8961_ROUT1_PGA; 216 snd_soc_component_write(component, WM8961_PWR_MGMT_2, pwr_reg); 217 218 /* Enable the amplifier */ 219 hp_reg |= WM8961_HPR_ENA | WM8961_HPL_ENA; 220 snd_soc_component_write(component, WM8961_ANALOGUE_HP_0, hp_reg); 221 222 /* Second stage enable */ 223 hp_reg |= WM8961_HPR_ENA_DLY | WM8961_HPL_ENA_DLY; 224 snd_soc_component_write(component, WM8961_ANALOGUE_HP_0, hp_reg); 225 226 /* Enable the DC servo & trigger startup */ 227 dcs_reg |= 228 WM8961_DCS_ENA_CHAN_HPR | WM8961_DCS_TRIG_STARTUP_HPR | 229 WM8961_DCS_ENA_CHAN_HPL | WM8961_DCS_TRIG_STARTUP_HPL; 230 dev_dbg(component->dev, "Enabling DC servo\n"); 231 232 snd_soc_component_write(component, WM8961_DC_SERVO_1, dcs_reg); 233 do { 234 msleep(1); 235 dcs_reg = snd_soc_component_read32(component, WM8961_DC_SERVO_1); 236 } while (--timeout && 237 dcs_reg & (WM8961_DCS_TRIG_STARTUP_HPR | 238 WM8961_DCS_TRIG_STARTUP_HPL)); 239 if (dcs_reg & (WM8961_DCS_TRIG_STARTUP_HPR | 240 WM8961_DCS_TRIG_STARTUP_HPL)) 241 dev_err(component->dev, "DC servo timed out\n"); 242 else 243 dev_dbg(component->dev, "DC servo startup complete\n"); 244 245 /* Enable the output stage */ 246 hp_reg |= WM8961_HPR_ENA_OUTP | WM8961_HPL_ENA_OUTP; 247 snd_soc_component_write(component, WM8961_ANALOGUE_HP_0, hp_reg); 248 249 /* Remove the short on the output stage */ 250 hp_reg |= WM8961_HPR_RMV_SHORT | WM8961_HPL_RMV_SHORT; 251 snd_soc_component_write(component, WM8961_ANALOGUE_HP_0, hp_reg); 252 } 253 254 if (event & SND_SOC_DAPM_PRE_PMD) { 255 /* Short the output */ 256 hp_reg &= ~(WM8961_HPR_RMV_SHORT | WM8961_HPL_RMV_SHORT); 257 snd_soc_component_write(component, WM8961_ANALOGUE_HP_0, hp_reg); 258 259 /* Disable the output stage */ 260 hp_reg &= ~(WM8961_HPR_ENA_OUTP | WM8961_HPL_ENA_OUTP); 261 snd_soc_component_write(component, WM8961_ANALOGUE_HP_0, hp_reg); 262 263 /* Disable DC offset cancellation */ 264 dcs_reg &= ~(WM8961_DCS_ENA_CHAN_HPR | 265 WM8961_DCS_ENA_CHAN_HPL); 266 snd_soc_component_write(component, WM8961_DC_SERVO_1, dcs_reg); 267 268 /* Finish up */ 269 hp_reg &= ~(WM8961_HPR_ENA_DLY | WM8961_HPR_ENA | 270 WM8961_HPL_ENA_DLY | WM8961_HPL_ENA); 271 snd_soc_component_write(component, WM8961_ANALOGUE_HP_0, hp_reg); 272 273 /* Disable the PGA */ 274 pwr_reg &= ~(WM8961_LOUT1_PGA | WM8961_ROUT1_PGA); 275 snd_soc_component_write(component, WM8961_PWR_MGMT_2, pwr_reg); 276 277 /* Disable the charge pump */ 278 dev_dbg(component->dev, "Disabling charge pump\n"); 279 snd_soc_component_write(component, WM8961_CHARGE_PUMP_1, 280 cp_reg & ~WM8961_CP_ENA); 281 } 282 283 return 0; 284 } 285 286 static int wm8961_spk_event(struct snd_soc_dapm_widget *w, 287 struct snd_kcontrol *kcontrol, int event) 288 { 289 struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm); 290 u16 pwr_reg = snd_soc_component_read32(component, WM8961_PWR_MGMT_2); 291 u16 spk_reg = snd_soc_component_read32(component, WM8961_CLASS_D_CONTROL_1); 292 293 if (event & SND_SOC_DAPM_POST_PMU) { 294 /* Enable the PGA */ 295 pwr_reg |= WM8961_SPKL_PGA | WM8961_SPKR_PGA; 296 snd_soc_component_write(component, WM8961_PWR_MGMT_2, pwr_reg); 297 298 /* Enable the amplifier */ 299 spk_reg |= WM8961_SPKL_ENA | WM8961_SPKR_ENA; 300 snd_soc_component_write(component, WM8961_CLASS_D_CONTROL_1, spk_reg); 301 } 302 303 if (event & SND_SOC_DAPM_PRE_PMD) { 304 /* Disable the amplifier */ 305 spk_reg &= ~(WM8961_SPKL_ENA | WM8961_SPKR_ENA); 306 snd_soc_component_write(component, WM8961_CLASS_D_CONTROL_1, spk_reg); 307 308 /* Disable the PGA */ 309 pwr_reg &= ~(WM8961_SPKL_PGA | WM8961_SPKR_PGA); 310 snd_soc_component_write(component, WM8961_PWR_MGMT_2, pwr_reg); 311 } 312 313 return 0; 314 } 315 316 static const char *adc_hpf_text[] = { 317 "Hi-fi", "Voice 1", "Voice 2", "Voice 3", 318 }; 319 320 static SOC_ENUM_SINGLE_DECL(adc_hpf, 321 WM8961_ADC_DAC_CONTROL_2, 7, adc_hpf_text); 322 323 static const char *dac_deemph_text[] = { 324 "None", "32kHz", "44.1kHz", "48kHz", 325 }; 326 327 static SOC_ENUM_SINGLE_DECL(dac_deemph, 328 WM8961_ADC_DAC_CONTROL_1, 1, dac_deemph_text); 329 330 static const DECLARE_TLV_DB_SCALE(out_tlv, -12100, 100, 1); 331 static const DECLARE_TLV_DB_SCALE(hp_sec_tlv, -700, 100, 0); 332 static const DECLARE_TLV_DB_SCALE(adc_tlv, -7200, 75, 1); 333 static const DECLARE_TLV_DB_SCALE(sidetone_tlv, -3600, 300, 0); 334 static const DECLARE_TLV_DB_RANGE(boost_tlv, 335 0, 0, TLV_DB_SCALE_ITEM(0, 0, 0), 336 1, 1, TLV_DB_SCALE_ITEM(13, 0, 0), 337 2, 2, TLV_DB_SCALE_ITEM(20, 0, 0), 338 3, 3, TLV_DB_SCALE_ITEM(29, 0, 0) 339 ); 340 static const DECLARE_TLV_DB_SCALE(pga_tlv, -2325, 75, 0); 341 342 static const struct snd_kcontrol_new wm8961_snd_controls[] = { 343 SOC_DOUBLE_R_TLV("Headphone Volume", WM8961_LOUT1_VOLUME, WM8961_ROUT1_VOLUME, 344 0, 127, 0, out_tlv), 345 SOC_DOUBLE_TLV("Headphone Secondary Volume", WM8961_ANALOGUE_HP_2, 346 6, 3, 7, 0, hp_sec_tlv), 347 SOC_DOUBLE_R("Headphone ZC Switch", WM8961_LOUT1_VOLUME, WM8961_ROUT1_VOLUME, 348 7, 1, 0), 349 350 SOC_DOUBLE_R_TLV("Speaker Volume", WM8961_LOUT2_VOLUME, WM8961_ROUT2_VOLUME, 351 0, 127, 0, out_tlv), 352 SOC_DOUBLE_R("Speaker ZC Switch", WM8961_LOUT2_VOLUME, WM8961_ROUT2_VOLUME, 353 7, 1, 0), 354 SOC_SINGLE("Speaker AC Gain", WM8961_CLASS_D_CONTROL_2, 0, 7, 0), 355 356 SOC_SINGLE("DAC x128 OSR Switch", WM8961_ADC_DAC_CONTROL_2, 0, 1, 0), 357 SOC_ENUM("DAC Deemphasis", dac_deemph), 358 SOC_SINGLE("DAC Soft Mute Switch", WM8961_ADC_DAC_CONTROL_2, 3, 1, 0), 359 360 SOC_DOUBLE_R_TLV("Sidetone Volume", WM8961_DSP_SIDETONE_0, 361 WM8961_DSP_SIDETONE_1, 4, 12, 0, sidetone_tlv), 362 363 SOC_SINGLE("ADC High Pass Filter Switch", WM8961_ADC_DAC_CONTROL_1, 0, 1, 0), 364 SOC_ENUM("ADC High Pass Filter Mode", adc_hpf), 365 366 SOC_DOUBLE_R_TLV("Capture Volume", 367 WM8961_LEFT_ADC_VOLUME, WM8961_RIGHT_ADC_VOLUME, 368 1, 119, 0, adc_tlv), 369 SOC_DOUBLE_R_TLV("Capture Boost Volume", 370 WM8961_ADCL_SIGNAL_PATH, WM8961_ADCR_SIGNAL_PATH, 371 4, 3, 0, boost_tlv), 372 SOC_DOUBLE_R_TLV("Capture PGA Volume", 373 WM8961_LEFT_INPUT_VOLUME, WM8961_RIGHT_INPUT_VOLUME, 374 0, 62, 0, pga_tlv), 375 SOC_DOUBLE_R("Capture PGA ZC Switch", 376 WM8961_LEFT_INPUT_VOLUME, WM8961_RIGHT_INPUT_VOLUME, 377 6, 1, 1), 378 SOC_DOUBLE_R("Capture PGA Switch", 379 WM8961_LEFT_INPUT_VOLUME, WM8961_RIGHT_INPUT_VOLUME, 380 7, 1, 1), 381 }; 382 383 static const char *sidetone_text[] = { 384 "None", "Left", "Right" 385 }; 386 387 static SOC_ENUM_SINGLE_DECL(dacl_sidetone, 388 WM8961_DSP_SIDETONE_0, 2, sidetone_text); 389 390 static SOC_ENUM_SINGLE_DECL(dacr_sidetone, 391 WM8961_DSP_SIDETONE_1, 2, sidetone_text); 392 393 static const struct snd_kcontrol_new dacl_mux = 394 SOC_DAPM_ENUM("DACL Sidetone", dacl_sidetone); 395 396 static const struct snd_kcontrol_new dacr_mux = 397 SOC_DAPM_ENUM("DACR Sidetone", dacr_sidetone); 398 399 static const struct snd_soc_dapm_widget wm8961_dapm_widgets[] = { 400 SND_SOC_DAPM_INPUT("LINPUT"), 401 SND_SOC_DAPM_INPUT("RINPUT"), 402 403 SND_SOC_DAPM_SUPPLY("CLK_DSP", WM8961_CLOCKING2, 4, 0, NULL, 0), 404 405 SND_SOC_DAPM_PGA("Left Input", WM8961_PWR_MGMT_1, 5, 0, NULL, 0), 406 SND_SOC_DAPM_PGA("Right Input", WM8961_PWR_MGMT_1, 4, 0, NULL, 0), 407 408 SND_SOC_DAPM_ADC("ADCL", "HiFi Capture", WM8961_PWR_MGMT_1, 3, 0), 409 SND_SOC_DAPM_ADC("ADCR", "HiFi Capture", WM8961_PWR_MGMT_1, 2, 0), 410 411 SND_SOC_DAPM_SUPPLY("MICBIAS", WM8961_PWR_MGMT_1, 1, 0, NULL, 0), 412 413 SND_SOC_DAPM_MUX("DACL Sidetone", SND_SOC_NOPM, 0, 0, &dacl_mux), 414 SND_SOC_DAPM_MUX("DACR Sidetone", SND_SOC_NOPM, 0, 0, &dacr_mux), 415 416 SND_SOC_DAPM_DAC("DACL", "HiFi Playback", WM8961_PWR_MGMT_2, 8, 0), 417 SND_SOC_DAPM_DAC("DACR", "HiFi Playback", WM8961_PWR_MGMT_2, 7, 0), 418 419 /* Handle as a mono path for DCS */ 420 SND_SOC_DAPM_PGA_E("Headphone Output", SND_SOC_NOPM, 421 4, 0, NULL, 0, wm8961_hp_event, 422 SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD), 423 SND_SOC_DAPM_PGA_E("Speaker Output", SND_SOC_NOPM, 424 4, 0, NULL, 0, wm8961_spk_event, 425 SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD), 426 427 SND_SOC_DAPM_OUTPUT("HP_L"), 428 SND_SOC_DAPM_OUTPUT("HP_R"), 429 SND_SOC_DAPM_OUTPUT("SPK_LN"), 430 SND_SOC_DAPM_OUTPUT("SPK_LP"), 431 SND_SOC_DAPM_OUTPUT("SPK_RN"), 432 SND_SOC_DAPM_OUTPUT("SPK_RP"), 433 }; 434 435 436 static const struct snd_soc_dapm_route audio_paths[] = { 437 { "DACL", NULL, "CLK_DSP" }, 438 { "DACL", NULL, "DACL Sidetone" }, 439 { "DACR", NULL, "CLK_DSP" }, 440 { "DACR", NULL, "DACR Sidetone" }, 441 442 { "DACL Sidetone", "Left", "ADCL" }, 443 { "DACL Sidetone", "Right", "ADCR" }, 444 445 { "DACR Sidetone", "Left", "ADCL" }, 446 { "DACR Sidetone", "Right", "ADCR" }, 447 448 { "HP_L", NULL, "Headphone Output" }, 449 { "HP_R", NULL, "Headphone Output" }, 450 { "Headphone Output", NULL, "DACL" }, 451 { "Headphone Output", NULL, "DACR" }, 452 453 { "SPK_LN", NULL, "Speaker Output" }, 454 { "SPK_LP", NULL, "Speaker Output" }, 455 { "SPK_RN", NULL, "Speaker Output" }, 456 { "SPK_RP", NULL, "Speaker Output" }, 457 458 { "Speaker Output", NULL, "DACL" }, 459 { "Speaker Output", NULL, "DACR" }, 460 461 { "ADCL", NULL, "Left Input" }, 462 { "ADCL", NULL, "CLK_DSP" }, 463 { "ADCR", NULL, "Right Input" }, 464 { "ADCR", NULL, "CLK_DSP" }, 465 466 { "Left Input", NULL, "LINPUT" }, 467 { "Right Input", NULL, "RINPUT" }, 468 469 }; 470 471 /* Values for CLK_SYS_RATE */ 472 static struct { 473 int ratio; 474 u16 val; 475 } wm8961_clk_sys_ratio[] = { 476 { 64, 0 }, 477 { 128, 1 }, 478 { 192, 2 }, 479 { 256, 3 }, 480 { 384, 4 }, 481 { 512, 5 }, 482 { 768, 6 }, 483 { 1024, 7 }, 484 { 1408, 8 }, 485 { 1536, 9 }, 486 }; 487 488 /* Values for SAMPLE_RATE */ 489 static struct { 490 int rate; 491 u16 val; 492 } wm8961_srate[] = { 493 { 48000, 0 }, 494 { 44100, 0 }, 495 { 32000, 1 }, 496 { 22050, 2 }, 497 { 24000, 2 }, 498 { 16000, 3 }, 499 { 11250, 4 }, 500 { 12000, 4 }, 501 { 8000, 5 }, 502 }; 503 504 static int wm8961_hw_params(struct snd_pcm_substream *substream, 505 struct snd_pcm_hw_params *params, 506 struct snd_soc_dai *dai) 507 { 508 struct snd_soc_component *component = dai->component; 509 struct wm8961_priv *wm8961 = snd_soc_component_get_drvdata(component); 510 int i, best, target, fs; 511 u16 reg; 512 513 fs = params_rate(params); 514 515 if (!wm8961->sysclk) { 516 dev_err(component->dev, "MCLK has not been specified\n"); 517 return -EINVAL; 518 } 519 520 /* Find the closest sample rate for the filters */ 521 best = 0; 522 for (i = 0; i < ARRAY_SIZE(wm8961_srate); i++) { 523 if (abs(wm8961_srate[i].rate - fs) < 524 abs(wm8961_srate[best].rate - fs)) 525 best = i; 526 } 527 reg = snd_soc_component_read32(component, WM8961_ADDITIONAL_CONTROL_3); 528 reg &= ~WM8961_SAMPLE_RATE_MASK; 529 reg |= wm8961_srate[best].val; 530 snd_soc_component_write(component, WM8961_ADDITIONAL_CONTROL_3, reg); 531 dev_dbg(component->dev, "Selected SRATE %dHz for %dHz\n", 532 wm8961_srate[best].rate, fs); 533 534 /* Select a CLK_SYS/fs ratio equal to or higher than required */ 535 target = wm8961->sysclk / fs; 536 537 if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK && target < 64) { 538 dev_err(component->dev, 539 "SYSCLK must be at least 64*fs for DAC\n"); 540 return -EINVAL; 541 } 542 if (substream->stream == SNDRV_PCM_STREAM_CAPTURE && target < 256) { 543 dev_err(component->dev, 544 "SYSCLK must be at least 256*fs for ADC\n"); 545 return -EINVAL; 546 } 547 548 for (i = 0; i < ARRAY_SIZE(wm8961_clk_sys_ratio); i++) { 549 if (wm8961_clk_sys_ratio[i].ratio >= target) 550 break; 551 } 552 if (i == ARRAY_SIZE(wm8961_clk_sys_ratio)) { 553 dev_err(component->dev, "Unable to generate CLK_SYS_RATE\n"); 554 return -EINVAL; 555 } 556 dev_dbg(component->dev, "Selected CLK_SYS_RATE of %d for %d/%d=%d\n", 557 wm8961_clk_sys_ratio[i].ratio, wm8961->sysclk, fs, 558 wm8961->sysclk / fs); 559 560 reg = snd_soc_component_read32(component, WM8961_CLOCKING_4); 561 reg &= ~WM8961_CLK_SYS_RATE_MASK; 562 reg |= wm8961_clk_sys_ratio[i].val << WM8961_CLK_SYS_RATE_SHIFT; 563 snd_soc_component_write(component, WM8961_CLOCKING_4, reg); 564 565 reg = snd_soc_component_read32(component, WM8961_AUDIO_INTERFACE_0); 566 reg &= ~WM8961_WL_MASK; 567 switch (params_width(params)) { 568 case 16: 569 break; 570 case 20: 571 reg |= 1 << WM8961_WL_SHIFT; 572 break; 573 case 24: 574 reg |= 2 << WM8961_WL_SHIFT; 575 break; 576 case 32: 577 reg |= 3 << WM8961_WL_SHIFT; 578 break; 579 default: 580 return -EINVAL; 581 } 582 snd_soc_component_write(component, WM8961_AUDIO_INTERFACE_0, reg); 583 584 /* Sloping stop-band filter is recommended for <= 24kHz */ 585 reg = snd_soc_component_read32(component, WM8961_ADC_DAC_CONTROL_2); 586 if (fs <= 24000) 587 reg |= WM8961_DACSLOPE; 588 else 589 reg &= ~WM8961_DACSLOPE; 590 snd_soc_component_write(component, WM8961_ADC_DAC_CONTROL_2, reg); 591 592 return 0; 593 } 594 595 static int wm8961_set_sysclk(struct snd_soc_dai *dai, int clk_id, 596 unsigned int freq, 597 int dir) 598 { 599 struct snd_soc_component *component = dai->component; 600 struct wm8961_priv *wm8961 = snd_soc_component_get_drvdata(component); 601 u16 reg = snd_soc_component_read32(component, WM8961_CLOCKING1); 602 603 if (freq > 33000000) { 604 dev_err(component->dev, "MCLK must be <33MHz\n"); 605 return -EINVAL; 606 } 607 608 if (freq > 16500000) { 609 dev_dbg(component->dev, "Using MCLK/2 for %dHz MCLK\n", freq); 610 reg |= WM8961_MCLKDIV; 611 freq /= 2; 612 } else { 613 dev_dbg(component->dev, "Using MCLK/1 for %dHz MCLK\n", freq); 614 reg &= ~WM8961_MCLKDIV; 615 } 616 617 snd_soc_component_write(component, WM8961_CLOCKING1, reg); 618 619 wm8961->sysclk = freq; 620 621 return 0; 622 } 623 624 static int wm8961_set_fmt(struct snd_soc_dai *dai, unsigned int fmt) 625 { 626 struct snd_soc_component *component = dai->component; 627 u16 aif = snd_soc_component_read32(component, WM8961_AUDIO_INTERFACE_0); 628 629 aif &= ~(WM8961_BCLKINV | WM8961_LRP | 630 WM8961_MS | WM8961_FORMAT_MASK); 631 632 switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { 633 case SND_SOC_DAIFMT_CBM_CFM: 634 aif |= WM8961_MS; 635 break; 636 case SND_SOC_DAIFMT_CBS_CFS: 637 break; 638 default: 639 return -EINVAL; 640 } 641 642 switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { 643 case SND_SOC_DAIFMT_RIGHT_J: 644 break; 645 646 case SND_SOC_DAIFMT_LEFT_J: 647 aif |= 1; 648 break; 649 650 case SND_SOC_DAIFMT_I2S: 651 aif |= 2; 652 break; 653 654 case SND_SOC_DAIFMT_DSP_B: 655 aif |= WM8961_LRP; 656 case SND_SOC_DAIFMT_DSP_A: 657 aif |= 3; 658 switch (fmt & SND_SOC_DAIFMT_INV_MASK) { 659 case SND_SOC_DAIFMT_NB_NF: 660 case SND_SOC_DAIFMT_IB_NF: 661 break; 662 default: 663 return -EINVAL; 664 } 665 break; 666 667 default: 668 return -EINVAL; 669 } 670 671 switch (fmt & SND_SOC_DAIFMT_INV_MASK) { 672 case SND_SOC_DAIFMT_NB_NF: 673 break; 674 case SND_SOC_DAIFMT_NB_IF: 675 aif |= WM8961_LRP; 676 break; 677 case SND_SOC_DAIFMT_IB_NF: 678 aif |= WM8961_BCLKINV; 679 break; 680 case SND_SOC_DAIFMT_IB_IF: 681 aif |= WM8961_BCLKINV | WM8961_LRP; 682 break; 683 default: 684 return -EINVAL; 685 } 686 687 return snd_soc_component_write(component, WM8961_AUDIO_INTERFACE_0, aif); 688 } 689 690 static int wm8961_set_tristate(struct snd_soc_dai *dai, int tristate) 691 { 692 struct snd_soc_component *component = dai->component; 693 u16 reg = snd_soc_component_read32(component, WM8961_ADDITIONAL_CONTROL_2); 694 695 if (tristate) 696 reg |= WM8961_TRIS; 697 else 698 reg &= ~WM8961_TRIS; 699 700 return snd_soc_component_write(component, WM8961_ADDITIONAL_CONTROL_2, reg); 701 } 702 703 static int wm8961_digital_mute(struct snd_soc_dai *dai, int mute) 704 { 705 struct snd_soc_component *component = dai->component; 706 u16 reg = snd_soc_component_read32(component, WM8961_ADC_DAC_CONTROL_1); 707 708 if (mute) 709 reg |= WM8961_DACMU; 710 else 711 reg &= ~WM8961_DACMU; 712 713 msleep(17); 714 715 return snd_soc_component_write(component, WM8961_ADC_DAC_CONTROL_1, reg); 716 } 717 718 static int wm8961_set_clkdiv(struct snd_soc_dai *dai, int div_id, int div) 719 { 720 struct snd_soc_component *component = dai->component; 721 u16 reg; 722 723 switch (div_id) { 724 case WM8961_BCLK: 725 reg = snd_soc_component_read32(component, WM8961_CLOCKING2); 726 reg &= ~WM8961_BCLKDIV_MASK; 727 reg |= div; 728 snd_soc_component_write(component, WM8961_CLOCKING2, reg); 729 break; 730 731 case WM8961_LRCLK: 732 reg = snd_soc_component_read32(component, WM8961_AUDIO_INTERFACE_2); 733 reg &= ~WM8961_LRCLK_RATE_MASK; 734 reg |= div; 735 snd_soc_component_write(component, WM8961_AUDIO_INTERFACE_2, reg); 736 break; 737 738 default: 739 return -EINVAL; 740 } 741 742 return 0; 743 } 744 745 static int wm8961_set_bias_level(struct snd_soc_component *component, 746 enum snd_soc_bias_level level) 747 { 748 u16 reg; 749 750 /* This is all slightly unusual since we have no bypass paths 751 * and the output amplifier structure means we can just slam 752 * the biases straight up rather than having to ramp them 753 * slowly. 754 */ 755 switch (level) { 756 case SND_SOC_BIAS_ON: 757 break; 758 759 case SND_SOC_BIAS_PREPARE: 760 if (snd_soc_component_get_bias_level(component) == SND_SOC_BIAS_STANDBY) { 761 /* Enable bias generation */ 762 reg = snd_soc_component_read32(component, WM8961_ANTI_POP); 763 reg |= WM8961_BUFIOEN | WM8961_BUFDCOPEN; 764 snd_soc_component_write(component, WM8961_ANTI_POP, reg); 765 766 /* VMID=2*50k, VREF */ 767 reg = snd_soc_component_read32(component, WM8961_PWR_MGMT_1); 768 reg &= ~WM8961_VMIDSEL_MASK; 769 reg |= (1 << WM8961_VMIDSEL_SHIFT) | WM8961_VREF; 770 snd_soc_component_write(component, WM8961_PWR_MGMT_1, reg); 771 } 772 break; 773 774 case SND_SOC_BIAS_STANDBY: 775 if (snd_soc_component_get_bias_level(component) == SND_SOC_BIAS_PREPARE) { 776 /* VREF off */ 777 reg = snd_soc_component_read32(component, WM8961_PWR_MGMT_1); 778 reg &= ~WM8961_VREF; 779 snd_soc_component_write(component, WM8961_PWR_MGMT_1, reg); 780 781 /* Bias generation off */ 782 reg = snd_soc_component_read32(component, WM8961_ANTI_POP); 783 reg &= ~(WM8961_BUFIOEN | WM8961_BUFDCOPEN); 784 snd_soc_component_write(component, WM8961_ANTI_POP, reg); 785 786 /* VMID off */ 787 reg = snd_soc_component_read32(component, WM8961_PWR_MGMT_1); 788 reg &= ~WM8961_VMIDSEL_MASK; 789 snd_soc_component_write(component, WM8961_PWR_MGMT_1, reg); 790 } 791 break; 792 793 case SND_SOC_BIAS_OFF: 794 break; 795 } 796 797 return 0; 798 } 799 800 801 #define WM8961_RATES SNDRV_PCM_RATE_8000_48000 802 803 #define WM8961_FORMATS \ 804 (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE | \ 805 SNDRV_PCM_FMTBIT_S24_LE) 806 807 static const struct snd_soc_dai_ops wm8961_dai_ops = { 808 .hw_params = wm8961_hw_params, 809 .set_sysclk = wm8961_set_sysclk, 810 .set_fmt = wm8961_set_fmt, 811 .digital_mute = wm8961_digital_mute, 812 .set_tristate = wm8961_set_tristate, 813 .set_clkdiv = wm8961_set_clkdiv, 814 }; 815 816 static struct snd_soc_dai_driver wm8961_dai = { 817 .name = "wm8961-hifi", 818 .playback = { 819 .stream_name = "HiFi Playback", 820 .channels_min = 1, 821 .channels_max = 2, 822 .rates = WM8961_RATES, 823 .formats = WM8961_FORMATS,}, 824 .capture = { 825 .stream_name = "HiFi Capture", 826 .channels_min = 1, 827 .channels_max = 2, 828 .rates = WM8961_RATES, 829 .formats = WM8961_FORMATS,}, 830 .ops = &wm8961_dai_ops, 831 }; 832 833 static int wm8961_probe(struct snd_soc_component *component) 834 { 835 u16 reg; 836 837 /* Enable class W */ 838 reg = snd_soc_component_read32(component, WM8961_CHARGE_PUMP_B); 839 reg |= WM8961_CP_DYN_PWR_MASK; 840 snd_soc_component_write(component, WM8961_CHARGE_PUMP_B, reg); 841 842 /* Latch volume update bits (right channel only, we always 843 * write both out) and default ZC on. */ 844 reg = snd_soc_component_read32(component, WM8961_ROUT1_VOLUME); 845 snd_soc_component_write(component, WM8961_ROUT1_VOLUME, 846 reg | WM8961_LO1ZC | WM8961_OUT1VU); 847 snd_soc_component_write(component, WM8961_LOUT1_VOLUME, reg | WM8961_LO1ZC); 848 reg = snd_soc_component_read32(component, WM8961_ROUT2_VOLUME); 849 snd_soc_component_write(component, WM8961_ROUT2_VOLUME, 850 reg | WM8961_SPKRZC | WM8961_SPKVU); 851 snd_soc_component_write(component, WM8961_LOUT2_VOLUME, reg | WM8961_SPKLZC); 852 853 reg = snd_soc_component_read32(component, WM8961_RIGHT_ADC_VOLUME); 854 snd_soc_component_write(component, WM8961_RIGHT_ADC_VOLUME, reg | WM8961_ADCVU); 855 reg = snd_soc_component_read32(component, WM8961_RIGHT_INPUT_VOLUME); 856 snd_soc_component_write(component, WM8961_RIGHT_INPUT_VOLUME, reg | WM8961_IPVU); 857 858 /* Use soft mute by default */ 859 reg = snd_soc_component_read32(component, WM8961_ADC_DAC_CONTROL_2); 860 reg |= WM8961_DACSMM; 861 snd_soc_component_write(component, WM8961_ADC_DAC_CONTROL_2, reg); 862 863 /* Use automatic clocking mode by default; for now this is all 864 * we support. 865 */ 866 reg = snd_soc_component_read32(component, WM8961_CLOCKING_3); 867 reg &= ~WM8961_MANUAL_MODE; 868 snd_soc_component_write(component, WM8961_CLOCKING_3, reg); 869 870 return 0; 871 } 872 873 #ifdef CONFIG_PM 874 875 static int wm8961_resume(struct snd_soc_component *component) 876 { 877 snd_soc_component_cache_sync(component); 878 879 return 0; 880 } 881 #else 882 #define wm8961_resume NULL 883 #endif 884 885 static const struct snd_soc_component_driver soc_component_dev_wm8961 = { 886 .probe = wm8961_probe, 887 .resume = wm8961_resume, 888 .set_bias_level = wm8961_set_bias_level, 889 .controls = wm8961_snd_controls, 890 .num_controls = ARRAY_SIZE(wm8961_snd_controls), 891 .dapm_widgets = wm8961_dapm_widgets, 892 .num_dapm_widgets = ARRAY_SIZE(wm8961_dapm_widgets), 893 .dapm_routes = audio_paths, 894 .num_dapm_routes = ARRAY_SIZE(audio_paths), 895 .suspend_bias_off = 1, 896 .idle_bias_on = 1, 897 .use_pmdown_time = 1, 898 .endianness = 1, 899 .non_legacy_dai_naming = 1, 900 }; 901 902 static const struct regmap_config wm8961_regmap = { 903 .reg_bits = 8, 904 .val_bits = 16, 905 .max_register = WM8961_MAX_REGISTER, 906 907 .reg_defaults = wm8961_reg_defaults, 908 .num_reg_defaults = ARRAY_SIZE(wm8961_reg_defaults), 909 .cache_type = REGCACHE_RBTREE, 910 911 .volatile_reg = wm8961_volatile, 912 .readable_reg = wm8961_readable, 913 }; 914 915 static int wm8961_i2c_probe(struct i2c_client *i2c, 916 const struct i2c_device_id *id) 917 { 918 struct wm8961_priv *wm8961; 919 unsigned int val; 920 int ret; 921 922 wm8961 = devm_kzalloc(&i2c->dev, sizeof(struct wm8961_priv), 923 GFP_KERNEL); 924 if (wm8961 == NULL) 925 return -ENOMEM; 926 927 wm8961->regmap = devm_regmap_init_i2c(i2c, &wm8961_regmap); 928 if (IS_ERR(wm8961->regmap)) 929 return PTR_ERR(wm8961->regmap); 930 931 ret = regmap_read(wm8961->regmap, WM8961_SOFTWARE_RESET, &val); 932 if (ret != 0) { 933 dev_err(&i2c->dev, "Failed to read chip ID: %d\n", ret); 934 return ret; 935 } 936 937 if (val != 0x1801) { 938 dev_err(&i2c->dev, "Device is not a WM8961: ID=0x%x\n", val); 939 return -EINVAL; 940 } 941 942 /* This isn't volatile - readback doesn't correspond to write */ 943 regcache_cache_bypass(wm8961->regmap, true); 944 ret = regmap_read(wm8961->regmap, WM8961_RIGHT_INPUT_VOLUME, &val); 945 regcache_cache_bypass(wm8961->regmap, false); 946 947 if (ret != 0) { 948 dev_err(&i2c->dev, "Failed to read chip revision: %d\n", ret); 949 return ret; 950 } 951 952 dev_info(&i2c->dev, "WM8961 family %d revision %c\n", 953 (val & WM8961_DEVICE_ID_MASK) >> WM8961_DEVICE_ID_SHIFT, 954 ((val & WM8961_CHIP_REV_MASK) >> WM8961_CHIP_REV_SHIFT) 955 + 'A'); 956 957 ret = regmap_write(wm8961->regmap, WM8961_SOFTWARE_RESET, 0x1801); 958 if (ret != 0) { 959 dev_err(&i2c->dev, "Failed to issue reset: %d\n", ret); 960 return ret; 961 } 962 963 i2c_set_clientdata(i2c, wm8961); 964 965 ret = devm_snd_soc_register_component(&i2c->dev, 966 &soc_component_dev_wm8961, &wm8961_dai, 1); 967 968 return ret; 969 } 970 971 static const struct i2c_device_id wm8961_i2c_id[] = { 972 { "wm8961", 0 }, 973 { } 974 }; 975 MODULE_DEVICE_TABLE(i2c, wm8961_i2c_id); 976 977 static struct i2c_driver wm8961_i2c_driver = { 978 .driver = { 979 .name = "wm8961", 980 }, 981 .probe = wm8961_i2c_probe, 982 .id_table = wm8961_i2c_id, 983 }; 984 985 module_i2c_driver(wm8961_i2c_driver); 986 987 MODULE_DESCRIPTION("ASoC WM8961 driver"); 988 MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>"); 989 MODULE_LICENSE("GPL"); 990