1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * wm8961.c -- WM8961 ALSA SoC Audio driver 4 * 5 * Copyright 2009-10 Wolfson Microelectronics, plc 6 * 7 * Author: Mark Brown 8 * 9 * Currently unimplemented features: 10 * - ALC 11 */ 12 13 #include <linux/module.h> 14 #include <linux/moduleparam.h> 15 #include <linux/init.h> 16 #include <linux/delay.h> 17 #include <linux/pm.h> 18 #include <linux/i2c.h> 19 #include <linux/regmap.h> 20 #include <linux/slab.h> 21 #include <sound/core.h> 22 #include <sound/pcm.h> 23 #include <sound/pcm_params.h> 24 #include <sound/soc.h> 25 #include <sound/initval.h> 26 #include <sound/tlv.h> 27 28 #include "wm8961.h" 29 30 #define WM8961_MAX_REGISTER 0xFC 31 32 static const struct reg_default wm8961_reg_defaults[] = { 33 { 0, 0x009F }, /* R0 - Left Input volume */ 34 { 1, 0x009F }, /* R1 - Right Input volume */ 35 { 2, 0x0000 }, /* R2 - LOUT1 volume */ 36 { 3, 0x0000 }, /* R3 - ROUT1 volume */ 37 { 4, 0x0020 }, /* R4 - Clocking1 */ 38 { 5, 0x0008 }, /* R5 - ADC & DAC Control 1 */ 39 { 6, 0x0000 }, /* R6 - ADC & DAC Control 2 */ 40 { 7, 0x000A }, /* R7 - Audio Interface 0 */ 41 { 8, 0x01F4 }, /* R8 - Clocking2 */ 42 { 9, 0x0000 }, /* R9 - Audio Interface 1 */ 43 { 10, 0x00FF }, /* R10 - Left DAC volume */ 44 { 11, 0x00FF }, /* R11 - Right DAC volume */ 45 46 { 14, 0x0040 }, /* R14 - Audio Interface 2 */ 47 48 { 17, 0x007B }, /* R17 - ALC1 */ 49 { 18, 0x0000 }, /* R18 - ALC2 */ 50 { 19, 0x0032 }, /* R19 - ALC3 */ 51 { 20, 0x0000 }, /* R20 - Noise Gate */ 52 { 21, 0x00C0 }, /* R21 - Left ADC volume */ 53 { 22, 0x00C0 }, /* R22 - Right ADC volume */ 54 { 23, 0x0120 }, /* R23 - Additional control(1) */ 55 { 24, 0x0000 }, /* R24 - Additional control(2) */ 56 { 25, 0x0000 }, /* R25 - Pwr Mgmt (1) */ 57 { 26, 0x0000 }, /* R26 - Pwr Mgmt (2) */ 58 { 27, 0x0000 }, /* R27 - Additional Control (3) */ 59 { 28, 0x0000 }, /* R28 - Anti-pop */ 60 61 { 30, 0x005F }, /* R30 - Clocking 3 */ 62 63 { 32, 0x0000 }, /* R32 - ADCL signal path */ 64 { 33, 0x0000 }, /* R33 - ADCR signal path */ 65 66 { 40, 0x0000 }, /* R40 - LOUT2 volume */ 67 { 41, 0x0000 }, /* R41 - ROUT2 volume */ 68 69 { 47, 0x0000 }, /* R47 - Pwr Mgmt (3) */ 70 { 48, 0x0023 }, /* R48 - Additional Control (4) */ 71 { 49, 0x0000 }, /* R49 - Class D Control 1 */ 72 73 { 51, 0x0003 }, /* R51 - Class D Control 2 */ 74 75 { 56, 0x0106 }, /* R56 - Clocking 4 */ 76 { 57, 0x0000 }, /* R57 - DSP Sidetone 0 */ 77 { 58, 0x0000 }, /* R58 - DSP Sidetone 1 */ 78 79 { 60, 0x0000 }, /* R60 - DC Servo 0 */ 80 { 61, 0x0000 }, /* R61 - DC Servo 1 */ 81 82 { 63, 0x015E }, /* R63 - DC Servo 3 */ 83 84 { 65, 0x0010 }, /* R65 - DC Servo 5 */ 85 86 { 68, 0x0003 }, /* R68 - Analogue PGA Bias */ 87 { 69, 0x0000 }, /* R69 - Analogue HP 0 */ 88 89 { 71, 0x01FB }, /* R71 - Analogue HP 2 */ 90 { 72, 0x0000 }, /* R72 - Charge Pump 1 */ 91 92 { 82, 0x0000 }, /* R82 - Charge Pump B */ 93 94 { 87, 0x0000 }, /* R87 - Write Sequencer 1 */ 95 { 88, 0x0000 }, /* R88 - Write Sequencer 2 */ 96 { 89, 0x0000 }, /* R89 - Write Sequencer 3 */ 97 { 90, 0x0000 }, /* R90 - Write Sequencer 4 */ 98 { 91, 0x0000 }, /* R91 - Write Sequencer 5 */ 99 { 92, 0x0000 }, /* R92 - Write Sequencer 6 */ 100 { 93, 0x0000 }, /* R93 - Write Sequencer 7 */ 101 102 { 252, 0x0001 }, /* R252 - General test 1 */ 103 }; 104 105 struct wm8961_priv { 106 struct regmap *regmap; 107 int sysclk; 108 }; 109 110 static bool wm8961_volatile(struct device *dev, unsigned int reg) 111 { 112 switch (reg) { 113 case WM8961_SOFTWARE_RESET: 114 case WM8961_WRITE_SEQUENCER_7: 115 case WM8961_DC_SERVO_1: 116 return true; 117 118 default: 119 return false; 120 } 121 } 122 123 static bool wm8961_readable(struct device *dev, unsigned int reg) 124 { 125 switch (reg) { 126 case WM8961_LEFT_INPUT_VOLUME: 127 case WM8961_RIGHT_INPUT_VOLUME: 128 case WM8961_LOUT1_VOLUME: 129 case WM8961_ROUT1_VOLUME: 130 case WM8961_CLOCKING1: 131 case WM8961_ADC_DAC_CONTROL_1: 132 case WM8961_ADC_DAC_CONTROL_2: 133 case WM8961_AUDIO_INTERFACE_0: 134 case WM8961_CLOCKING2: 135 case WM8961_AUDIO_INTERFACE_1: 136 case WM8961_LEFT_DAC_VOLUME: 137 case WM8961_RIGHT_DAC_VOLUME: 138 case WM8961_AUDIO_INTERFACE_2: 139 case WM8961_SOFTWARE_RESET: 140 case WM8961_ALC1: 141 case WM8961_ALC2: 142 case WM8961_ALC3: 143 case WM8961_NOISE_GATE: 144 case WM8961_LEFT_ADC_VOLUME: 145 case WM8961_RIGHT_ADC_VOLUME: 146 case WM8961_ADDITIONAL_CONTROL_1: 147 case WM8961_ADDITIONAL_CONTROL_2: 148 case WM8961_PWR_MGMT_1: 149 case WM8961_PWR_MGMT_2: 150 case WM8961_ADDITIONAL_CONTROL_3: 151 case WM8961_ANTI_POP: 152 case WM8961_CLOCKING_3: 153 case WM8961_ADCL_SIGNAL_PATH: 154 case WM8961_ADCR_SIGNAL_PATH: 155 case WM8961_LOUT2_VOLUME: 156 case WM8961_ROUT2_VOLUME: 157 case WM8961_PWR_MGMT_3: 158 case WM8961_ADDITIONAL_CONTROL_4: 159 case WM8961_CLASS_D_CONTROL_1: 160 case WM8961_CLASS_D_CONTROL_2: 161 case WM8961_CLOCKING_4: 162 case WM8961_DSP_SIDETONE_0: 163 case WM8961_DSP_SIDETONE_1: 164 case WM8961_DC_SERVO_0: 165 case WM8961_DC_SERVO_1: 166 case WM8961_DC_SERVO_3: 167 case WM8961_DC_SERVO_5: 168 case WM8961_ANALOGUE_PGA_BIAS: 169 case WM8961_ANALOGUE_HP_0: 170 case WM8961_ANALOGUE_HP_2: 171 case WM8961_CHARGE_PUMP_1: 172 case WM8961_CHARGE_PUMP_B: 173 case WM8961_WRITE_SEQUENCER_1: 174 case WM8961_WRITE_SEQUENCER_2: 175 case WM8961_WRITE_SEQUENCER_3: 176 case WM8961_WRITE_SEQUENCER_4: 177 case WM8961_WRITE_SEQUENCER_5: 178 case WM8961_WRITE_SEQUENCER_6: 179 case WM8961_WRITE_SEQUENCER_7: 180 case WM8961_GENERAL_TEST_1: 181 return true; 182 default: 183 return false; 184 } 185 } 186 187 /* 188 * The headphone output supports special anti-pop sequences giving 189 * silent power up and power down. 190 */ 191 static int wm8961_hp_event(struct snd_soc_dapm_widget *w, 192 struct snd_kcontrol *kcontrol, int event) 193 { 194 struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm); 195 u16 hp_reg = snd_soc_component_read(component, WM8961_ANALOGUE_HP_0); 196 u16 cp_reg = snd_soc_component_read(component, WM8961_CHARGE_PUMP_1); 197 u16 pwr_reg = snd_soc_component_read(component, WM8961_PWR_MGMT_2); 198 u16 dcs_reg = snd_soc_component_read(component, WM8961_DC_SERVO_1); 199 int timeout = 500; 200 201 if (event & SND_SOC_DAPM_POST_PMU) { 202 /* Make sure the output is shorted */ 203 hp_reg &= ~(WM8961_HPR_RMV_SHORT | WM8961_HPL_RMV_SHORT); 204 snd_soc_component_write(component, WM8961_ANALOGUE_HP_0, hp_reg); 205 206 /* Enable the charge pump */ 207 cp_reg |= WM8961_CP_ENA; 208 snd_soc_component_write(component, WM8961_CHARGE_PUMP_1, cp_reg); 209 mdelay(5); 210 211 /* Enable the PGA */ 212 pwr_reg |= WM8961_LOUT1_PGA | WM8961_ROUT1_PGA; 213 snd_soc_component_write(component, WM8961_PWR_MGMT_2, pwr_reg); 214 215 /* Enable the amplifier */ 216 hp_reg |= WM8961_HPR_ENA | WM8961_HPL_ENA; 217 snd_soc_component_write(component, WM8961_ANALOGUE_HP_0, hp_reg); 218 219 /* Second stage enable */ 220 hp_reg |= WM8961_HPR_ENA_DLY | WM8961_HPL_ENA_DLY; 221 snd_soc_component_write(component, WM8961_ANALOGUE_HP_0, hp_reg); 222 223 /* Enable the DC servo & trigger startup */ 224 dcs_reg |= 225 WM8961_DCS_ENA_CHAN_HPR | WM8961_DCS_TRIG_STARTUP_HPR | 226 WM8961_DCS_ENA_CHAN_HPL | WM8961_DCS_TRIG_STARTUP_HPL; 227 dev_dbg(component->dev, "Enabling DC servo\n"); 228 229 snd_soc_component_write(component, WM8961_DC_SERVO_1, dcs_reg); 230 do { 231 msleep(1); 232 dcs_reg = snd_soc_component_read(component, WM8961_DC_SERVO_1); 233 } while (--timeout && 234 dcs_reg & (WM8961_DCS_TRIG_STARTUP_HPR | 235 WM8961_DCS_TRIG_STARTUP_HPL)); 236 if (dcs_reg & (WM8961_DCS_TRIG_STARTUP_HPR | 237 WM8961_DCS_TRIG_STARTUP_HPL)) 238 dev_err(component->dev, "DC servo timed out\n"); 239 else 240 dev_dbg(component->dev, "DC servo startup complete\n"); 241 242 /* Enable the output stage */ 243 hp_reg |= WM8961_HPR_ENA_OUTP | WM8961_HPL_ENA_OUTP; 244 snd_soc_component_write(component, WM8961_ANALOGUE_HP_0, hp_reg); 245 246 /* Remove the short on the output stage */ 247 hp_reg |= WM8961_HPR_RMV_SHORT | WM8961_HPL_RMV_SHORT; 248 snd_soc_component_write(component, WM8961_ANALOGUE_HP_0, hp_reg); 249 } 250 251 if (event & SND_SOC_DAPM_PRE_PMD) { 252 /* Short the output */ 253 hp_reg &= ~(WM8961_HPR_RMV_SHORT | WM8961_HPL_RMV_SHORT); 254 snd_soc_component_write(component, WM8961_ANALOGUE_HP_0, hp_reg); 255 256 /* Disable the output stage */ 257 hp_reg &= ~(WM8961_HPR_ENA_OUTP | WM8961_HPL_ENA_OUTP); 258 snd_soc_component_write(component, WM8961_ANALOGUE_HP_0, hp_reg); 259 260 /* Disable DC offset cancellation */ 261 dcs_reg &= ~(WM8961_DCS_ENA_CHAN_HPR | 262 WM8961_DCS_ENA_CHAN_HPL); 263 snd_soc_component_write(component, WM8961_DC_SERVO_1, dcs_reg); 264 265 /* Finish up */ 266 hp_reg &= ~(WM8961_HPR_ENA_DLY | WM8961_HPR_ENA | 267 WM8961_HPL_ENA_DLY | WM8961_HPL_ENA); 268 snd_soc_component_write(component, WM8961_ANALOGUE_HP_0, hp_reg); 269 270 /* Disable the PGA */ 271 pwr_reg &= ~(WM8961_LOUT1_PGA | WM8961_ROUT1_PGA); 272 snd_soc_component_write(component, WM8961_PWR_MGMT_2, pwr_reg); 273 274 /* Disable the charge pump */ 275 dev_dbg(component->dev, "Disabling charge pump\n"); 276 snd_soc_component_write(component, WM8961_CHARGE_PUMP_1, 277 cp_reg & ~WM8961_CP_ENA); 278 } 279 280 return 0; 281 } 282 283 static int wm8961_spk_event(struct snd_soc_dapm_widget *w, 284 struct snd_kcontrol *kcontrol, int event) 285 { 286 struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm); 287 u16 pwr_reg = snd_soc_component_read(component, WM8961_PWR_MGMT_2); 288 u16 spk_reg = snd_soc_component_read(component, WM8961_CLASS_D_CONTROL_1); 289 290 if (event & SND_SOC_DAPM_POST_PMU) { 291 /* Enable the PGA */ 292 pwr_reg |= WM8961_SPKL_PGA | WM8961_SPKR_PGA; 293 snd_soc_component_write(component, WM8961_PWR_MGMT_2, pwr_reg); 294 295 /* Enable the amplifier */ 296 spk_reg |= WM8961_SPKL_ENA | WM8961_SPKR_ENA; 297 snd_soc_component_write(component, WM8961_CLASS_D_CONTROL_1, spk_reg); 298 } 299 300 if (event & SND_SOC_DAPM_PRE_PMD) { 301 /* Disable the amplifier */ 302 spk_reg &= ~(WM8961_SPKL_ENA | WM8961_SPKR_ENA); 303 snd_soc_component_write(component, WM8961_CLASS_D_CONTROL_1, spk_reg); 304 305 /* Disable the PGA */ 306 pwr_reg &= ~(WM8961_SPKL_PGA | WM8961_SPKR_PGA); 307 snd_soc_component_write(component, WM8961_PWR_MGMT_2, pwr_reg); 308 } 309 310 return 0; 311 } 312 313 static const char *adc_hpf_text[] = { 314 "Hi-fi", "Voice 1", "Voice 2", "Voice 3", 315 }; 316 317 static SOC_ENUM_SINGLE_DECL(adc_hpf, 318 WM8961_ADC_DAC_CONTROL_2, 7, adc_hpf_text); 319 320 static const char *dac_deemph_text[] = { 321 "None", "32kHz", "44.1kHz", "48kHz", 322 }; 323 324 static SOC_ENUM_SINGLE_DECL(dac_deemph, 325 WM8961_ADC_DAC_CONTROL_1, 1, dac_deemph_text); 326 327 static const DECLARE_TLV_DB_SCALE(out_tlv, -12100, 100, 1); 328 static const DECLARE_TLV_DB_SCALE(hp_sec_tlv, -700, 100, 0); 329 static const DECLARE_TLV_DB_SCALE(adc_tlv, -7200, 75, 1); 330 static const DECLARE_TLV_DB_SCALE(sidetone_tlv, -3600, 300, 0); 331 static const DECLARE_TLV_DB_RANGE(boost_tlv, 332 0, 0, TLV_DB_SCALE_ITEM(0, 0, 0), 333 1, 1, TLV_DB_SCALE_ITEM(13, 0, 0), 334 2, 2, TLV_DB_SCALE_ITEM(20, 0, 0), 335 3, 3, TLV_DB_SCALE_ITEM(29, 0, 0) 336 ); 337 static const DECLARE_TLV_DB_SCALE(pga_tlv, -2325, 75, 0); 338 339 static const struct snd_kcontrol_new wm8961_snd_controls[] = { 340 SOC_DOUBLE_R_TLV("Headphone Volume", WM8961_LOUT1_VOLUME, WM8961_ROUT1_VOLUME, 341 0, 127, 0, out_tlv), 342 SOC_DOUBLE_TLV("Headphone Secondary Volume", WM8961_ANALOGUE_HP_2, 343 6, 3, 7, 0, hp_sec_tlv), 344 SOC_DOUBLE_R("Headphone ZC Switch", WM8961_LOUT1_VOLUME, WM8961_ROUT1_VOLUME, 345 7, 1, 0), 346 347 SOC_DOUBLE_R_TLV("Speaker Volume", WM8961_LOUT2_VOLUME, WM8961_ROUT2_VOLUME, 348 0, 127, 0, out_tlv), 349 SOC_DOUBLE_R("Speaker ZC Switch", WM8961_LOUT2_VOLUME, WM8961_ROUT2_VOLUME, 350 7, 1, 0), 351 SOC_SINGLE("Speaker AC Gain", WM8961_CLASS_D_CONTROL_2, 0, 7, 0), 352 353 SOC_SINGLE("DAC x128 OSR Switch", WM8961_ADC_DAC_CONTROL_2, 0, 1, 0), 354 SOC_ENUM("DAC Deemphasis", dac_deemph), 355 SOC_SINGLE("DAC Soft Mute Switch", WM8961_ADC_DAC_CONTROL_2, 3, 1, 0), 356 357 SOC_DOUBLE_R_TLV("Sidetone Volume", WM8961_DSP_SIDETONE_0, 358 WM8961_DSP_SIDETONE_1, 4, 12, 0, sidetone_tlv), 359 360 SOC_SINGLE("ADC High Pass Filter Switch", WM8961_ADC_DAC_CONTROL_1, 0, 1, 0), 361 SOC_ENUM("ADC High Pass Filter Mode", adc_hpf), 362 363 SOC_DOUBLE_R_TLV("Capture Volume", 364 WM8961_LEFT_ADC_VOLUME, WM8961_RIGHT_ADC_VOLUME, 365 1, 119, 0, adc_tlv), 366 SOC_DOUBLE_R_TLV("Capture Boost Volume", 367 WM8961_ADCL_SIGNAL_PATH, WM8961_ADCR_SIGNAL_PATH, 368 4, 3, 0, boost_tlv), 369 SOC_DOUBLE_R_TLV("Capture PGA Volume", 370 WM8961_LEFT_INPUT_VOLUME, WM8961_RIGHT_INPUT_VOLUME, 371 0, 62, 0, pga_tlv), 372 SOC_DOUBLE_R("Capture PGA ZC Switch", 373 WM8961_LEFT_INPUT_VOLUME, WM8961_RIGHT_INPUT_VOLUME, 374 6, 1, 1), 375 SOC_DOUBLE_R("Capture PGA Switch", 376 WM8961_LEFT_INPUT_VOLUME, WM8961_RIGHT_INPUT_VOLUME, 377 7, 1, 1), 378 }; 379 380 static const char *sidetone_text[] = { 381 "None", "Left", "Right" 382 }; 383 384 static SOC_ENUM_SINGLE_DECL(dacl_sidetone, 385 WM8961_DSP_SIDETONE_0, 2, sidetone_text); 386 387 static SOC_ENUM_SINGLE_DECL(dacr_sidetone, 388 WM8961_DSP_SIDETONE_1, 2, sidetone_text); 389 390 static const struct snd_kcontrol_new dacl_mux = 391 SOC_DAPM_ENUM("DACL Sidetone", dacl_sidetone); 392 393 static const struct snd_kcontrol_new dacr_mux = 394 SOC_DAPM_ENUM("DACR Sidetone", dacr_sidetone); 395 396 static const struct snd_soc_dapm_widget wm8961_dapm_widgets[] = { 397 SND_SOC_DAPM_INPUT("LINPUT"), 398 SND_SOC_DAPM_INPUT("RINPUT"), 399 400 SND_SOC_DAPM_SUPPLY("CLK_DSP", WM8961_CLOCKING2, 4, 0, NULL, 0), 401 402 SND_SOC_DAPM_PGA("Left Input", WM8961_PWR_MGMT_1, 5, 0, NULL, 0), 403 SND_SOC_DAPM_PGA("Right Input", WM8961_PWR_MGMT_1, 4, 0, NULL, 0), 404 405 SND_SOC_DAPM_ADC("ADCL", "HiFi Capture", WM8961_PWR_MGMT_1, 3, 0), 406 SND_SOC_DAPM_ADC("ADCR", "HiFi Capture", WM8961_PWR_MGMT_1, 2, 0), 407 408 SND_SOC_DAPM_SUPPLY("MICBIAS", WM8961_PWR_MGMT_1, 1, 0, NULL, 0), 409 410 SND_SOC_DAPM_MUX("DACL Sidetone", SND_SOC_NOPM, 0, 0, &dacl_mux), 411 SND_SOC_DAPM_MUX("DACR Sidetone", SND_SOC_NOPM, 0, 0, &dacr_mux), 412 413 SND_SOC_DAPM_DAC("DACL", "HiFi Playback", WM8961_PWR_MGMT_2, 8, 0), 414 SND_SOC_DAPM_DAC("DACR", "HiFi Playback", WM8961_PWR_MGMT_2, 7, 0), 415 416 /* Handle as a mono path for DCS */ 417 SND_SOC_DAPM_PGA_E("Headphone Output", SND_SOC_NOPM, 418 4, 0, NULL, 0, wm8961_hp_event, 419 SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD), 420 SND_SOC_DAPM_PGA_E("Speaker Output", SND_SOC_NOPM, 421 4, 0, NULL, 0, wm8961_spk_event, 422 SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD), 423 424 SND_SOC_DAPM_OUTPUT("HP_L"), 425 SND_SOC_DAPM_OUTPUT("HP_R"), 426 SND_SOC_DAPM_OUTPUT("SPK_LN"), 427 SND_SOC_DAPM_OUTPUT("SPK_LP"), 428 SND_SOC_DAPM_OUTPUT("SPK_RN"), 429 SND_SOC_DAPM_OUTPUT("SPK_RP"), 430 }; 431 432 433 static const struct snd_soc_dapm_route audio_paths[] = { 434 { "DACL", NULL, "CLK_DSP" }, 435 { "DACL", NULL, "DACL Sidetone" }, 436 { "DACR", NULL, "CLK_DSP" }, 437 { "DACR", NULL, "DACR Sidetone" }, 438 439 { "DACL Sidetone", "Left", "ADCL" }, 440 { "DACL Sidetone", "Right", "ADCR" }, 441 442 { "DACR Sidetone", "Left", "ADCL" }, 443 { "DACR Sidetone", "Right", "ADCR" }, 444 445 { "HP_L", NULL, "Headphone Output" }, 446 { "HP_R", NULL, "Headphone Output" }, 447 { "Headphone Output", NULL, "DACL" }, 448 { "Headphone Output", NULL, "DACR" }, 449 450 { "SPK_LN", NULL, "Speaker Output" }, 451 { "SPK_LP", NULL, "Speaker Output" }, 452 { "SPK_RN", NULL, "Speaker Output" }, 453 { "SPK_RP", NULL, "Speaker Output" }, 454 455 { "Speaker Output", NULL, "DACL" }, 456 { "Speaker Output", NULL, "DACR" }, 457 458 { "ADCL", NULL, "Left Input" }, 459 { "ADCL", NULL, "CLK_DSP" }, 460 { "ADCR", NULL, "Right Input" }, 461 { "ADCR", NULL, "CLK_DSP" }, 462 463 { "Left Input", NULL, "LINPUT" }, 464 { "Right Input", NULL, "RINPUT" }, 465 466 }; 467 468 /* Values for CLK_SYS_RATE */ 469 static struct { 470 int ratio; 471 u16 val; 472 } wm8961_clk_sys_ratio[] = { 473 { 64, 0 }, 474 { 128, 1 }, 475 { 192, 2 }, 476 { 256, 3 }, 477 { 384, 4 }, 478 { 512, 5 }, 479 { 768, 6 }, 480 { 1024, 7 }, 481 { 1408, 8 }, 482 { 1536, 9 }, 483 }; 484 485 /* Values for SAMPLE_RATE */ 486 static struct { 487 int rate; 488 u16 val; 489 } wm8961_srate[] = { 490 { 48000, 0 }, 491 { 44100, 0 }, 492 { 32000, 1 }, 493 { 22050, 2 }, 494 { 24000, 2 }, 495 { 16000, 3 }, 496 { 11250, 4 }, 497 { 12000, 4 }, 498 { 8000, 5 }, 499 }; 500 501 static int wm8961_hw_params(struct snd_pcm_substream *substream, 502 struct snd_pcm_hw_params *params, 503 struct snd_soc_dai *dai) 504 { 505 struct snd_soc_component *component = dai->component; 506 struct wm8961_priv *wm8961 = snd_soc_component_get_drvdata(component); 507 int i, best, target, fs; 508 u16 reg; 509 510 fs = params_rate(params); 511 512 if (!wm8961->sysclk) { 513 dev_err(component->dev, "MCLK has not been specified\n"); 514 return -EINVAL; 515 } 516 517 /* Find the closest sample rate for the filters */ 518 best = 0; 519 for (i = 0; i < ARRAY_SIZE(wm8961_srate); i++) { 520 if (abs(wm8961_srate[i].rate - fs) < 521 abs(wm8961_srate[best].rate - fs)) 522 best = i; 523 } 524 reg = snd_soc_component_read(component, WM8961_ADDITIONAL_CONTROL_3); 525 reg &= ~WM8961_SAMPLE_RATE_MASK; 526 reg |= wm8961_srate[best].val; 527 snd_soc_component_write(component, WM8961_ADDITIONAL_CONTROL_3, reg); 528 dev_dbg(component->dev, "Selected SRATE %dHz for %dHz\n", 529 wm8961_srate[best].rate, fs); 530 531 /* Select a CLK_SYS/fs ratio equal to or higher than required */ 532 target = wm8961->sysclk / fs; 533 534 if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK && target < 64) { 535 dev_err(component->dev, 536 "SYSCLK must be at least 64*fs for DAC\n"); 537 return -EINVAL; 538 } 539 if (substream->stream == SNDRV_PCM_STREAM_CAPTURE && target < 256) { 540 dev_err(component->dev, 541 "SYSCLK must be at least 256*fs for ADC\n"); 542 return -EINVAL; 543 } 544 545 for (i = 0; i < ARRAY_SIZE(wm8961_clk_sys_ratio); i++) { 546 if (wm8961_clk_sys_ratio[i].ratio >= target) 547 break; 548 } 549 if (i == ARRAY_SIZE(wm8961_clk_sys_ratio)) { 550 dev_err(component->dev, "Unable to generate CLK_SYS_RATE\n"); 551 return -EINVAL; 552 } 553 dev_dbg(component->dev, "Selected CLK_SYS_RATE of %d for %d/%d=%d\n", 554 wm8961_clk_sys_ratio[i].ratio, wm8961->sysclk, fs, 555 wm8961->sysclk / fs); 556 557 reg = snd_soc_component_read(component, WM8961_CLOCKING_4); 558 reg &= ~WM8961_CLK_SYS_RATE_MASK; 559 reg |= wm8961_clk_sys_ratio[i].val << WM8961_CLK_SYS_RATE_SHIFT; 560 snd_soc_component_write(component, WM8961_CLOCKING_4, reg); 561 562 reg = snd_soc_component_read(component, WM8961_AUDIO_INTERFACE_0); 563 reg &= ~WM8961_WL_MASK; 564 switch (params_width(params)) { 565 case 16: 566 break; 567 case 20: 568 reg |= 1 << WM8961_WL_SHIFT; 569 break; 570 case 24: 571 reg |= 2 << WM8961_WL_SHIFT; 572 break; 573 case 32: 574 reg |= 3 << WM8961_WL_SHIFT; 575 break; 576 default: 577 return -EINVAL; 578 } 579 snd_soc_component_write(component, WM8961_AUDIO_INTERFACE_0, reg); 580 581 /* Sloping stop-band filter is recommended for <= 24kHz */ 582 reg = snd_soc_component_read(component, WM8961_ADC_DAC_CONTROL_2); 583 if (fs <= 24000) 584 reg |= WM8961_DACSLOPE; 585 else 586 reg &= ~WM8961_DACSLOPE; 587 snd_soc_component_write(component, WM8961_ADC_DAC_CONTROL_2, reg); 588 589 return 0; 590 } 591 592 static int wm8961_set_sysclk(struct snd_soc_dai *dai, int clk_id, 593 unsigned int freq, 594 int dir) 595 { 596 struct snd_soc_component *component = dai->component; 597 struct wm8961_priv *wm8961 = snd_soc_component_get_drvdata(component); 598 u16 reg = snd_soc_component_read(component, WM8961_CLOCKING1); 599 600 if (freq > 33000000) { 601 dev_err(component->dev, "MCLK must be <33MHz\n"); 602 return -EINVAL; 603 } 604 605 if (freq > 16500000) { 606 dev_dbg(component->dev, "Using MCLK/2 for %dHz MCLK\n", freq); 607 reg |= WM8961_MCLKDIV; 608 freq /= 2; 609 } else { 610 dev_dbg(component->dev, "Using MCLK/1 for %dHz MCLK\n", freq); 611 reg &= ~WM8961_MCLKDIV; 612 } 613 614 snd_soc_component_write(component, WM8961_CLOCKING1, reg); 615 616 wm8961->sysclk = freq; 617 618 return 0; 619 } 620 621 static int wm8961_set_fmt(struct snd_soc_dai *dai, unsigned int fmt) 622 { 623 struct snd_soc_component *component = dai->component; 624 u16 aif = snd_soc_component_read(component, WM8961_AUDIO_INTERFACE_0); 625 626 aif &= ~(WM8961_BCLKINV | WM8961_LRP | 627 WM8961_MS | WM8961_FORMAT_MASK); 628 629 switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { 630 case SND_SOC_DAIFMT_CBM_CFM: 631 aif |= WM8961_MS; 632 break; 633 case SND_SOC_DAIFMT_CBS_CFS: 634 break; 635 default: 636 return -EINVAL; 637 } 638 639 switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { 640 case SND_SOC_DAIFMT_RIGHT_J: 641 break; 642 643 case SND_SOC_DAIFMT_LEFT_J: 644 aif |= 1; 645 break; 646 647 case SND_SOC_DAIFMT_I2S: 648 aif |= 2; 649 break; 650 651 case SND_SOC_DAIFMT_DSP_B: 652 aif |= WM8961_LRP; 653 fallthrough; 654 case SND_SOC_DAIFMT_DSP_A: 655 aif |= 3; 656 switch (fmt & SND_SOC_DAIFMT_INV_MASK) { 657 case SND_SOC_DAIFMT_NB_NF: 658 case SND_SOC_DAIFMT_IB_NF: 659 break; 660 default: 661 return -EINVAL; 662 } 663 break; 664 665 default: 666 return -EINVAL; 667 } 668 669 switch (fmt & SND_SOC_DAIFMT_INV_MASK) { 670 case SND_SOC_DAIFMT_NB_NF: 671 break; 672 case SND_SOC_DAIFMT_NB_IF: 673 aif |= WM8961_LRP; 674 break; 675 case SND_SOC_DAIFMT_IB_NF: 676 aif |= WM8961_BCLKINV; 677 break; 678 case SND_SOC_DAIFMT_IB_IF: 679 aif |= WM8961_BCLKINV | WM8961_LRP; 680 break; 681 default: 682 return -EINVAL; 683 } 684 685 return snd_soc_component_write(component, WM8961_AUDIO_INTERFACE_0, aif); 686 } 687 688 static int wm8961_set_tristate(struct snd_soc_dai *dai, int tristate) 689 { 690 struct snd_soc_component *component = dai->component; 691 u16 reg = snd_soc_component_read(component, WM8961_ADDITIONAL_CONTROL_2); 692 693 if (tristate) 694 reg |= WM8961_TRIS; 695 else 696 reg &= ~WM8961_TRIS; 697 698 return snd_soc_component_write(component, WM8961_ADDITIONAL_CONTROL_2, reg); 699 } 700 701 static int wm8961_mute(struct snd_soc_dai *dai, int mute, int direction) 702 { 703 struct snd_soc_component *component = dai->component; 704 u16 reg = snd_soc_component_read(component, WM8961_ADC_DAC_CONTROL_1); 705 706 if (mute) 707 reg |= WM8961_DACMU; 708 else 709 reg &= ~WM8961_DACMU; 710 711 msleep(17); 712 713 return snd_soc_component_write(component, WM8961_ADC_DAC_CONTROL_1, reg); 714 } 715 716 static int wm8961_set_clkdiv(struct snd_soc_dai *dai, int div_id, int div) 717 { 718 struct snd_soc_component *component = dai->component; 719 u16 reg; 720 721 switch (div_id) { 722 case WM8961_BCLK: 723 reg = snd_soc_component_read(component, WM8961_CLOCKING2); 724 reg &= ~WM8961_BCLKDIV_MASK; 725 reg |= div; 726 snd_soc_component_write(component, WM8961_CLOCKING2, reg); 727 break; 728 729 case WM8961_LRCLK: 730 reg = snd_soc_component_read(component, WM8961_AUDIO_INTERFACE_2); 731 reg &= ~WM8961_LRCLK_RATE_MASK; 732 reg |= div; 733 snd_soc_component_write(component, WM8961_AUDIO_INTERFACE_2, reg); 734 break; 735 736 default: 737 return -EINVAL; 738 } 739 740 return 0; 741 } 742 743 static int wm8961_set_bias_level(struct snd_soc_component *component, 744 enum snd_soc_bias_level level) 745 { 746 u16 reg; 747 748 /* This is all slightly unusual since we have no bypass paths 749 * and the output amplifier structure means we can just slam 750 * the biases straight up rather than having to ramp them 751 * slowly. 752 */ 753 switch (level) { 754 case SND_SOC_BIAS_ON: 755 break; 756 757 case SND_SOC_BIAS_PREPARE: 758 if (snd_soc_component_get_bias_level(component) == SND_SOC_BIAS_STANDBY) { 759 /* Enable bias generation */ 760 reg = snd_soc_component_read(component, WM8961_ANTI_POP); 761 reg |= WM8961_BUFIOEN | WM8961_BUFDCOPEN; 762 snd_soc_component_write(component, WM8961_ANTI_POP, reg); 763 764 /* VMID=2*50k, VREF */ 765 reg = snd_soc_component_read(component, WM8961_PWR_MGMT_1); 766 reg &= ~WM8961_VMIDSEL_MASK; 767 reg |= (1 << WM8961_VMIDSEL_SHIFT) | WM8961_VREF; 768 snd_soc_component_write(component, WM8961_PWR_MGMT_1, reg); 769 } 770 break; 771 772 case SND_SOC_BIAS_STANDBY: 773 if (snd_soc_component_get_bias_level(component) == SND_SOC_BIAS_PREPARE) { 774 /* VREF off */ 775 reg = snd_soc_component_read(component, WM8961_PWR_MGMT_1); 776 reg &= ~WM8961_VREF; 777 snd_soc_component_write(component, WM8961_PWR_MGMT_1, reg); 778 779 /* Bias generation off */ 780 reg = snd_soc_component_read(component, WM8961_ANTI_POP); 781 reg &= ~(WM8961_BUFIOEN | WM8961_BUFDCOPEN); 782 snd_soc_component_write(component, WM8961_ANTI_POP, reg); 783 784 /* VMID off */ 785 reg = snd_soc_component_read(component, WM8961_PWR_MGMT_1); 786 reg &= ~WM8961_VMIDSEL_MASK; 787 snd_soc_component_write(component, WM8961_PWR_MGMT_1, reg); 788 } 789 break; 790 791 case SND_SOC_BIAS_OFF: 792 break; 793 } 794 795 return 0; 796 } 797 798 799 #define WM8961_RATES SNDRV_PCM_RATE_8000_48000 800 801 #define WM8961_FORMATS \ 802 (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE | \ 803 SNDRV_PCM_FMTBIT_S24_LE) 804 805 static const struct snd_soc_dai_ops wm8961_dai_ops = { 806 .hw_params = wm8961_hw_params, 807 .set_sysclk = wm8961_set_sysclk, 808 .set_fmt = wm8961_set_fmt, 809 .mute_stream = wm8961_mute, 810 .set_tristate = wm8961_set_tristate, 811 .set_clkdiv = wm8961_set_clkdiv, 812 .no_capture_mute = 1, 813 }; 814 815 static struct snd_soc_dai_driver wm8961_dai = { 816 .name = "wm8961-hifi", 817 .playback = { 818 .stream_name = "HiFi Playback", 819 .channels_min = 1, 820 .channels_max = 2, 821 .rates = WM8961_RATES, 822 .formats = WM8961_FORMATS,}, 823 .capture = { 824 .stream_name = "HiFi Capture", 825 .channels_min = 1, 826 .channels_max = 2, 827 .rates = WM8961_RATES, 828 .formats = WM8961_FORMATS,}, 829 .ops = &wm8961_dai_ops, 830 }; 831 832 static int wm8961_probe(struct snd_soc_component *component) 833 { 834 u16 reg; 835 836 /* Enable class W */ 837 reg = snd_soc_component_read(component, WM8961_CHARGE_PUMP_B); 838 reg |= WM8961_CP_DYN_PWR_MASK; 839 snd_soc_component_write(component, WM8961_CHARGE_PUMP_B, reg); 840 841 /* Latch volume update bits (right channel only, we always 842 * write both out) and default ZC on. */ 843 reg = snd_soc_component_read(component, WM8961_ROUT1_VOLUME); 844 snd_soc_component_write(component, WM8961_ROUT1_VOLUME, 845 reg | WM8961_LO1ZC | WM8961_OUT1VU); 846 snd_soc_component_write(component, WM8961_LOUT1_VOLUME, reg | WM8961_LO1ZC); 847 reg = snd_soc_component_read(component, WM8961_ROUT2_VOLUME); 848 snd_soc_component_write(component, WM8961_ROUT2_VOLUME, 849 reg | WM8961_SPKRZC | WM8961_SPKVU); 850 snd_soc_component_write(component, WM8961_LOUT2_VOLUME, reg | WM8961_SPKLZC); 851 852 reg = snd_soc_component_read(component, WM8961_RIGHT_ADC_VOLUME); 853 snd_soc_component_write(component, WM8961_RIGHT_ADC_VOLUME, reg | WM8961_ADCVU); 854 reg = snd_soc_component_read(component, WM8961_RIGHT_INPUT_VOLUME); 855 snd_soc_component_write(component, WM8961_RIGHT_INPUT_VOLUME, reg | WM8961_IPVU); 856 857 /* Use soft mute by default */ 858 reg = snd_soc_component_read(component, WM8961_ADC_DAC_CONTROL_2); 859 reg |= WM8961_DACSMM; 860 snd_soc_component_write(component, WM8961_ADC_DAC_CONTROL_2, reg); 861 862 /* Use automatic clocking mode by default; for now this is all 863 * we support. 864 */ 865 reg = snd_soc_component_read(component, WM8961_CLOCKING_3); 866 reg &= ~WM8961_MANUAL_MODE; 867 snd_soc_component_write(component, WM8961_CLOCKING_3, reg); 868 869 return 0; 870 } 871 872 #ifdef CONFIG_PM 873 874 static int wm8961_resume(struct snd_soc_component *component) 875 { 876 snd_soc_component_cache_sync(component); 877 878 return 0; 879 } 880 #else 881 #define wm8961_resume NULL 882 #endif 883 884 static const struct snd_soc_component_driver soc_component_dev_wm8961 = { 885 .probe = wm8961_probe, 886 .resume = wm8961_resume, 887 .set_bias_level = wm8961_set_bias_level, 888 .controls = wm8961_snd_controls, 889 .num_controls = ARRAY_SIZE(wm8961_snd_controls), 890 .dapm_widgets = wm8961_dapm_widgets, 891 .num_dapm_widgets = ARRAY_SIZE(wm8961_dapm_widgets), 892 .dapm_routes = audio_paths, 893 .num_dapm_routes = ARRAY_SIZE(audio_paths), 894 .suspend_bias_off = 1, 895 .idle_bias_on = 1, 896 .use_pmdown_time = 1, 897 .endianness = 1, 898 }; 899 900 static const struct regmap_config wm8961_regmap = { 901 .reg_bits = 8, 902 .val_bits = 16, 903 .max_register = WM8961_MAX_REGISTER, 904 905 .reg_defaults = wm8961_reg_defaults, 906 .num_reg_defaults = ARRAY_SIZE(wm8961_reg_defaults), 907 .cache_type = REGCACHE_RBTREE, 908 909 .volatile_reg = wm8961_volatile, 910 .readable_reg = wm8961_readable, 911 }; 912 913 static int wm8961_i2c_probe(struct i2c_client *i2c) 914 { 915 struct wm8961_priv *wm8961; 916 unsigned int val; 917 int ret; 918 919 wm8961 = devm_kzalloc(&i2c->dev, sizeof(struct wm8961_priv), 920 GFP_KERNEL); 921 if (wm8961 == NULL) 922 return -ENOMEM; 923 924 wm8961->regmap = devm_regmap_init_i2c(i2c, &wm8961_regmap); 925 if (IS_ERR(wm8961->regmap)) 926 return PTR_ERR(wm8961->regmap); 927 928 ret = regmap_read(wm8961->regmap, WM8961_SOFTWARE_RESET, &val); 929 if (ret != 0) { 930 dev_err(&i2c->dev, "Failed to read chip ID: %d\n", ret); 931 return ret; 932 } 933 934 if (val != 0x1801) { 935 dev_err(&i2c->dev, "Device is not a WM8961: ID=0x%x\n", val); 936 return -EINVAL; 937 } 938 939 /* This isn't volatile - readback doesn't correspond to write */ 940 regcache_cache_bypass(wm8961->regmap, true); 941 ret = regmap_read(wm8961->regmap, WM8961_RIGHT_INPUT_VOLUME, &val); 942 regcache_cache_bypass(wm8961->regmap, false); 943 944 if (ret != 0) { 945 dev_err(&i2c->dev, "Failed to read chip revision: %d\n", ret); 946 return ret; 947 } 948 949 dev_info(&i2c->dev, "WM8961 family %d revision %c\n", 950 (val & WM8961_DEVICE_ID_MASK) >> WM8961_DEVICE_ID_SHIFT, 951 ((val & WM8961_CHIP_REV_MASK) >> WM8961_CHIP_REV_SHIFT) 952 + 'A'); 953 954 ret = regmap_write(wm8961->regmap, WM8961_SOFTWARE_RESET, 0x1801); 955 if (ret != 0) { 956 dev_err(&i2c->dev, "Failed to issue reset: %d\n", ret); 957 return ret; 958 } 959 960 i2c_set_clientdata(i2c, wm8961); 961 962 ret = devm_snd_soc_register_component(&i2c->dev, 963 &soc_component_dev_wm8961, &wm8961_dai, 1); 964 965 return ret; 966 } 967 968 static const struct i2c_device_id wm8961_i2c_id[] = { 969 { "wm8961", 0 }, 970 { } 971 }; 972 MODULE_DEVICE_TABLE(i2c, wm8961_i2c_id); 973 974 static const struct of_device_id wm8961_of_match[] __maybe_unused = { 975 { .compatible = "wlf,wm8961", }, 976 { } 977 }; 978 MODULE_DEVICE_TABLE(of, wm8961_of_match); 979 980 static struct i2c_driver wm8961_i2c_driver = { 981 .driver = { 982 .name = "wm8961", 983 .of_match_table = of_match_ptr(wm8961_of_match), 984 }, 985 .probe = wm8961_i2c_probe, 986 .id_table = wm8961_i2c_id, 987 }; 988 989 module_i2c_driver(wm8961_i2c_driver); 990 991 MODULE_DESCRIPTION("ASoC WM8961 driver"); 992 MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>"); 993 MODULE_LICENSE("GPL"); 994