1 /* 2 * wm8903.c -- WM8903 ALSA SoC Audio driver 3 * 4 * Copyright 2008-12 Wolfson Microelectronics 5 * Copyright 2011-2012 NVIDIA, Inc. 6 * 7 * Author: Mark Brown <broonie@opensource.wolfsonmicro.com> 8 * 9 * This program is free software; you can redistribute it and/or modify 10 * it under the terms of the GNU General Public License version 2 as 11 * published by the Free Software Foundation. 12 * 13 * TODO: 14 * - TDM mode configuration. 15 * - Digital microphone support. 16 */ 17 18 #include <linux/module.h> 19 #include <linux/moduleparam.h> 20 #include <linux/init.h> 21 #include <linux/completion.h> 22 #include <linux/delay.h> 23 #include <linux/gpio/driver.h> 24 #include <linux/pm.h> 25 #include <linux/i2c.h> 26 #include <linux/regmap.h> 27 #include <linux/regulator/consumer.h> 28 #include <linux/slab.h> 29 #include <linux/irq.h> 30 #include <linux/mutex.h> 31 #include <sound/core.h> 32 #include <sound/jack.h> 33 #include <sound/pcm.h> 34 #include <sound/pcm_params.h> 35 #include <sound/tlv.h> 36 #include <sound/soc.h> 37 #include <sound/initval.h> 38 #include <sound/wm8903.h> 39 #include <trace/events/asoc.h> 40 41 #include "wm8903.h" 42 43 /* Register defaults at reset */ 44 static const struct reg_default wm8903_reg_defaults[] = { 45 { 4, 0x0018 }, /* R4 - Bias Control 0 */ 46 { 5, 0x0000 }, /* R5 - VMID Control 0 */ 47 { 6, 0x0000 }, /* R6 - Mic Bias Control 0 */ 48 { 8, 0x0001 }, /* R8 - Analogue DAC 0 */ 49 { 10, 0x0001 }, /* R10 - Analogue ADC 0 */ 50 { 12, 0x0000 }, /* R12 - Power Management 0 */ 51 { 13, 0x0000 }, /* R13 - Power Management 1 */ 52 { 14, 0x0000 }, /* R14 - Power Management 2 */ 53 { 15, 0x0000 }, /* R15 - Power Management 3 */ 54 { 16, 0x0000 }, /* R16 - Power Management 4 */ 55 { 17, 0x0000 }, /* R17 - Power Management 5 */ 56 { 18, 0x0000 }, /* R18 - Power Management 6 */ 57 { 20, 0x0400 }, /* R20 - Clock Rates 0 */ 58 { 21, 0x0D07 }, /* R21 - Clock Rates 1 */ 59 { 22, 0x0000 }, /* R22 - Clock Rates 2 */ 60 { 24, 0x0050 }, /* R24 - Audio Interface 0 */ 61 { 25, 0x0242 }, /* R25 - Audio Interface 1 */ 62 { 26, 0x0008 }, /* R26 - Audio Interface 2 */ 63 { 27, 0x0022 }, /* R27 - Audio Interface 3 */ 64 { 30, 0x00C0 }, /* R30 - DAC Digital Volume Left */ 65 { 31, 0x00C0 }, /* R31 - DAC Digital Volume Right */ 66 { 32, 0x0000 }, /* R32 - DAC Digital 0 */ 67 { 33, 0x0000 }, /* R33 - DAC Digital 1 */ 68 { 36, 0x00C0 }, /* R36 - ADC Digital Volume Left */ 69 { 37, 0x00C0 }, /* R37 - ADC Digital Volume Right */ 70 { 38, 0x0000 }, /* R38 - ADC Digital 0 */ 71 { 39, 0x0073 }, /* R39 - Digital Microphone 0 */ 72 { 40, 0x09BF }, /* R40 - DRC 0 */ 73 { 41, 0x3241 }, /* R41 - DRC 1 */ 74 { 42, 0x0020 }, /* R42 - DRC 2 */ 75 { 43, 0x0000 }, /* R43 - DRC 3 */ 76 { 44, 0x0085 }, /* R44 - Analogue Left Input 0 */ 77 { 45, 0x0085 }, /* R45 - Analogue Right Input 0 */ 78 { 46, 0x0044 }, /* R46 - Analogue Left Input 1 */ 79 { 47, 0x0044 }, /* R47 - Analogue Right Input 1 */ 80 { 50, 0x0008 }, /* R50 - Analogue Left Mix 0 */ 81 { 51, 0x0004 }, /* R51 - Analogue Right Mix 0 */ 82 { 52, 0x0000 }, /* R52 - Analogue Spk Mix Left 0 */ 83 { 53, 0x0000 }, /* R53 - Analogue Spk Mix Left 1 */ 84 { 54, 0x0000 }, /* R54 - Analogue Spk Mix Right 0 */ 85 { 55, 0x0000 }, /* R55 - Analogue Spk Mix Right 1 */ 86 { 57, 0x002D }, /* R57 - Analogue OUT1 Left */ 87 { 58, 0x002D }, /* R58 - Analogue OUT1 Right */ 88 { 59, 0x0039 }, /* R59 - Analogue OUT2 Left */ 89 { 60, 0x0039 }, /* R60 - Analogue OUT2 Right */ 90 { 62, 0x0139 }, /* R62 - Analogue OUT3 Left */ 91 { 63, 0x0139 }, /* R63 - Analogue OUT3 Right */ 92 { 64, 0x0000 }, /* R65 - Analogue SPK Output Control 0 */ 93 { 67, 0x0010 }, /* R67 - DC Servo 0 */ 94 { 69, 0x00A4 }, /* R69 - DC Servo 2 */ 95 { 90, 0x0000 }, /* R90 - Analogue HP 0 */ 96 { 94, 0x0000 }, /* R94 - Analogue Lineout 0 */ 97 { 98, 0x0000 }, /* R98 - Charge Pump 0 */ 98 { 104, 0x0000 }, /* R104 - Class W 0 */ 99 { 108, 0x0000 }, /* R108 - Write Sequencer 0 */ 100 { 109, 0x0000 }, /* R109 - Write Sequencer 1 */ 101 { 110, 0x0000 }, /* R110 - Write Sequencer 2 */ 102 { 111, 0x0000 }, /* R111 - Write Sequencer 3 */ 103 { 112, 0x0000 }, /* R112 - Write Sequencer 4 */ 104 { 114, 0x0000 }, /* R114 - Control Interface */ 105 { 116, 0x00A8 }, /* R116 - GPIO Control 1 */ 106 { 117, 0x00A8 }, /* R117 - GPIO Control 2 */ 107 { 118, 0x00A8 }, /* R118 - GPIO Control 3 */ 108 { 119, 0x0220 }, /* R119 - GPIO Control 4 */ 109 { 120, 0x01A0 }, /* R120 - GPIO Control 5 */ 110 { 122, 0xFFFF }, /* R122 - Interrupt Status 1 Mask */ 111 { 123, 0x0000 }, /* R123 - Interrupt Polarity 1 */ 112 { 126, 0x0000 }, /* R126 - Interrupt Control */ 113 { 129, 0x0000 }, /* R129 - Control Interface Test 1 */ 114 { 149, 0x6810 }, /* R149 - Charge Pump Test 1 */ 115 { 164, 0x0028 }, /* R164 - Clock Rate Test 4 */ 116 { 172, 0x0000 }, /* R172 - Analogue Output Bias 0 */ 117 }; 118 119 #define WM8903_NUM_SUPPLIES 4 120 static const char *wm8903_supply_names[WM8903_NUM_SUPPLIES] = { 121 "AVDD", 122 "CPVDD", 123 "DBVDD", 124 "DCVDD", 125 }; 126 127 struct wm8903_priv { 128 struct wm8903_platform_data *pdata; 129 struct device *dev; 130 struct regmap *regmap; 131 struct regulator_bulk_data supplies[WM8903_NUM_SUPPLIES]; 132 133 int sysclk; 134 int irq; 135 136 struct mutex lock; 137 int fs; 138 int deemph; 139 140 int dcs_pending; 141 int dcs_cache[4]; 142 143 /* Reference count */ 144 int class_w_users; 145 146 struct snd_soc_jack *mic_jack; 147 int mic_det; 148 int mic_short; 149 int mic_last_report; 150 int mic_delay; 151 152 #ifdef CONFIG_GPIOLIB 153 struct gpio_chip gpio_chip; 154 #endif 155 }; 156 157 static bool wm8903_readable_register(struct device *dev, unsigned int reg) 158 { 159 switch (reg) { 160 case WM8903_SW_RESET_AND_ID: 161 case WM8903_REVISION_NUMBER: 162 case WM8903_BIAS_CONTROL_0: 163 case WM8903_VMID_CONTROL_0: 164 case WM8903_MIC_BIAS_CONTROL_0: 165 case WM8903_ANALOGUE_DAC_0: 166 case WM8903_ANALOGUE_ADC_0: 167 case WM8903_POWER_MANAGEMENT_0: 168 case WM8903_POWER_MANAGEMENT_1: 169 case WM8903_POWER_MANAGEMENT_2: 170 case WM8903_POWER_MANAGEMENT_3: 171 case WM8903_POWER_MANAGEMENT_4: 172 case WM8903_POWER_MANAGEMENT_5: 173 case WM8903_POWER_MANAGEMENT_6: 174 case WM8903_CLOCK_RATES_0: 175 case WM8903_CLOCK_RATES_1: 176 case WM8903_CLOCK_RATES_2: 177 case WM8903_AUDIO_INTERFACE_0: 178 case WM8903_AUDIO_INTERFACE_1: 179 case WM8903_AUDIO_INTERFACE_2: 180 case WM8903_AUDIO_INTERFACE_3: 181 case WM8903_DAC_DIGITAL_VOLUME_LEFT: 182 case WM8903_DAC_DIGITAL_VOLUME_RIGHT: 183 case WM8903_DAC_DIGITAL_0: 184 case WM8903_DAC_DIGITAL_1: 185 case WM8903_ADC_DIGITAL_VOLUME_LEFT: 186 case WM8903_ADC_DIGITAL_VOLUME_RIGHT: 187 case WM8903_ADC_DIGITAL_0: 188 case WM8903_DIGITAL_MICROPHONE_0: 189 case WM8903_DRC_0: 190 case WM8903_DRC_1: 191 case WM8903_DRC_2: 192 case WM8903_DRC_3: 193 case WM8903_ANALOGUE_LEFT_INPUT_0: 194 case WM8903_ANALOGUE_RIGHT_INPUT_0: 195 case WM8903_ANALOGUE_LEFT_INPUT_1: 196 case WM8903_ANALOGUE_RIGHT_INPUT_1: 197 case WM8903_ANALOGUE_LEFT_MIX_0: 198 case WM8903_ANALOGUE_RIGHT_MIX_0: 199 case WM8903_ANALOGUE_SPK_MIX_LEFT_0: 200 case WM8903_ANALOGUE_SPK_MIX_LEFT_1: 201 case WM8903_ANALOGUE_SPK_MIX_RIGHT_0: 202 case WM8903_ANALOGUE_SPK_MIX_RIGHT_1: 203 case WM8903_ANALOGUE_OUT1_LEFT: 204 case WM8903_ANALOGUE_OUT1_RIGHT: 205 case WM8903_ANALOGUE_OUT2_LEFT: 206 case WM8903_ANALOGUE_OUT2_RIGHT: 207 case WM8903_ANALOGUE_OUT3_LEFT: 208 case WM8903_ANALOGUE_OUT3_RIGHT: 209 case WM8903_ANALOGUE_SPK_OUTPUT_CONTROL_0: 210 case WM8903_DC_SERVO_0: 211 case WM8903_DC_SERVO_2: 212 case WM8903_DC_SERVO_READBACK_1: 213 case WM8903_DC_SERVO_READBACK_2: 214 case WM8903_DC_SERVO_READBACK_3: 215 case WM8903_DC_SERVO_READBACK_4: 216 case WM8903_ANALOGUE_HP_0: 217 case WM8903_ANALOGUE_LINEOUT_0: 218 case WM8903_CHARGE_PUMP_0: 219 case WM8903_CLASS_W_0: 220 case WM8903_WRITE_SEQUENCER_0: 221 case WM8903_WRITE_SEQUENCER_1: 222 case WM8903_WRITE_SEQUENCER_2: 223 case WM8903_WRITE_SEQUENCER_3: 224 case WM8903_WRITE_SEQUENCER_4: 225 case WM8903_CONTROL_INTERFACE: 226 case WM8903_GPIO_CONTROL_1: 227 case WM8903_GPIO_CONTROL_2: 228 case WM8903_GPIO_CONTROL_3: 229 case WM8903_GPIO_CONTROL_4: 230 case WM8903_GPIO_CONTROL_5: 231 case WM8903_INTERRUPT_STATUS_1: 232 case WM8903_INTERRUPT_STATUS_1_MASK: 233 case WM8903_INTERRUPT_POLARITY_1: 234 case WM8903_INTERRUPT_CONTROL: 235 case WM8903_CLOCK_RATE_TEST_4: 236 case WM8903_ANALOGUE_OUTPUT_BIAS_0: 237 return true; 238 default: 239 return false; 240 } 241 } 242 243 static bool wm8903_volatile_register(struct device *dev, unsigned int reg) 244 { 245 switch (reg) { 246 case WM8903_SW_RESET_AND_ID: 247 case WM8903_REVISION_NUMBER: 248 case WM8903_INTERRUPT_STATUS_1: 249 case WM8903_WRITE_SEQUENCER_4: 250 case WM8903_DC_SERVO_READBACK_1: 251 case WM8903_DC_SERVO_READBACK_2: 252 case WM8903_DC_SERVO_READBACK_3: 253 case WM8903_DC_SERVO_READBACK_4: 254 return 1; 255 256 default: 257 return 0; 258 } 259 } 260 261 static int wm8903_cp_event(struct snd_soc_dapm_widget *w, 262 struct snd_kcontrol *kcontrol, int event) 263 { 264 WARN_ON(event != SND_SOC_DAPM_POST_PMU); 265 mdelay(4); 266 267 return 0; 268 } 269 270 static int wm8903_dcs_event(struct snd_soc_dapm_widget *w, 271 struct snd_kcontrol *kcontrol, int event) 272 { 273 struct snd_soc_codec *codec = snd_soc_dapm_to_codec(w->dapm); 274 struct wm8903_priv *wm8903 = snd_soc_codec_get_drvdata(codec); 275 276 switch (event) { 277 case SND_SOC_DAPM_POST_PMU: 278 wm8903->dcs_pending |= 1 << w->shift; 279 break; 280 case SND_SOC_DAPM_PRE_PMD: 281 snd_soc_update_bits(codec, WM8903_DC_SERVO_0, 282 1 << w->shift, 0); 283 break; 284 } 285 286 return 0; 287 } 288 289 #define WM8903_DCS_MODE_WRITE_STOP 0 290 #define WM8903_DCS_MODE_START_STOP 2 291 292 static void wm8903_seq_notifier(struct snd_soc_dapm_context *dapm, 293 enum snd_soc_dapm_type event, int subseq) 294 { 295 struct snd_soc_codec *codec = snd_soc_dapm_to_codec(dapm); 296 struct wm8903_priv *wm8903 = snd_soc_codec_get_drvdata(codec); 297 int dcs_mode = WM8903_DCS_MODE_WRITE_STOP; 298 int i, val; 299 300 /* Complete any pending DC servo starts */ 301 if (wm8903->dcs_pending) { 302 dev_dbg(codec->dev, "Starting DC servo for %x\n", 303 wm8903->dcs_pending); 304 305 /* If we've no cached values then we need to do startup */ 306 for (i = 0; i < ARRAY_SIZE(wm8903->dcs_cache); i++) { 307 if (!(wm8903->dcs_pending & (1 << i))) 308 continue; 309 310 if (wm8903->dcs_cache[i]) { 311 dev_dbg(codec->dev, 312 "Restore DC servo %d value %x\n", 313 3 - i, wm8903->dcs_cache[i]); 314 315 snd_soc_write(codec, WM8903_DC_SERVO_4 + i, 316 wm8903->dcs_cache[i] & 0xff); 317 } else { 318 dev_dbg(codec->dev, 319 "Calibrate DC servo %d\n", 3 - i); 320 dcs_mode = WM8903_DCS_MODE_START_STOP; 321 } 322 } 323 324 /* Don't trust the cache for analogue */ 325 if (wm8903->class_w_users) 326 dcs_mode = WM8903_DCS_MODE_START_STOP; 327 328 snd_soc_update_bits(codec, WM8903_DC_SERVO_2, 329 WM8903_DCS_MODE_MASK, dcs_mode); 330 331 snd_soc_update_bits(codec, WM8903_DC_SERVO_0, 332 WM8903_DCS_ENA_MASK, wm8903->dcs_pending); 333 334 switch (dcs_mode) { 335 case WM8903_DCS_MODE_WRITE_STOP: 336 break; 337 338 case WM8903_DCS_MODE_START_STOP: 339 msleep(270); 340 341 /* Cache the measured offsets for digital */ 342 if (wm8903->class_w_users) 343 break; 344 345 for (i = 0; i < ARRAY_SIZE(wm8903->dcs_cache); i++) { 346 if (!(wm8903->dcs_pending & (1 << i))) 347 continue; 348 349 val = snd_soc_read(codec, 350 WM8903_DC_SERVO_READBACK_1 + i); 351 dev_dbg(codec->dev, "DC servo %d: %x\n", 352 3 - i, val); 353 wm8903->dcs_cache[i] = val; 354 } 355 break; 356 357 default: 358 pr_warn("DCS mode %d delay not set\n", dcs_mode); 359 break; 360 } 361 362 wm8903->dcs_pending = 0; 363 } 364 } 365 366 /* 367 * When used with DAC outputs only the WM8903 charge pump supports 368 * operation in class W mode, providing very low power consumption 369 * when used with digital sources. Enable and disable this mode 370 * automatically depending on the mixer configuration. 371 * 372 * All the relevant controls are simple switches. 373 */ 374 static int wm8903_class_w_put(struct snd_kcontrol *kcontrol, 375 struct snd_ctl_elem_value *ucontrol) 376 { 377 struct snd_soc_codec *codec = snd_soc_dapm_kcontrol_codec(kcontrol); 378 struct wm8903_priv *wm8903 = snd_soc_codec_get_drvdata(codec); 379 u16 reg; 380 int ret; 381 382 reg = snd_soc_read(codec, WM8903_CLASS_W_0); 383 384 /* Turn it off if we're about to enable bypass */ 385 if (ucontrol->value.integer.value[0]) { 386 if (wm8903->class_w_users == 0) { 387 dev_dbg(codec->dev, "Disabling Class W\n"); 388 snd_soc_write(codec, WM8903_CLASS_W_0, reg & 389 ~(WM8903_CP_DYN_FREQ | WM8903_CP_DYN_V)); 390 } 391 wm8903->class_w_users++; 392 } 393 394 /* Implement the change */ 395 ret = snd_soc_dapm_put_volsw(kcontrol, ucontrol); 396 397 /* If we've just disabled the last bypass path turn Class W on */ 398 if (!ucontrol->value.integer.value[0]) { 399 if (wm8903->class_w_users == 1) { 400 dev_dbg(codec->dev, "Enabling Class W\n"); 401 snd_soc_write(codec, WM8903_CLASS_W_0, reg | 402 WM8903_CP_DYN_FREQ | WM8903_CP_DYN_V); 403 } 404 wm8903->class_w_users--; 405 } 406 407 dev_dbg(codec->dev, "Bypass use count now %d\n", 408 wm8903->class_w_users); 409 410 return ret; 411 } 412 413 #define SOC_DAPM_SINGLE_W(xname, reg, shift, max, invert) \ 414 SOC_SINGLE_EXT(xname, reg, shift, max, invert, \ 415 snd_soc_dapm_get_volsw, wm8903_class_w_put) 416 417 418 static int wm8903_deemph[] = { 0, 32000, 44100, 48000 }; 419 420 static int wm8903_set_deemph(struct snd_soc_codec *codec) 421 { 422 struct wm8903_priv *wm8903 = snd_soc_codec_get_drvdata(codec); 423 int val, i, best; 424 425 /* If we're using deemphasis select the nearest available sample 426 * rate. 427 */ 428 if (wm8903->deemph) { 429 best = 1; 430 for (i = 2; i < ARRAY_SIZE(wm8903_deemph); i++) { 431 if (abs(wm8903_deemph[i] - wm8903->fs) < 432 abs(wm8903_deemph[best] - wm8903->fs)) 433 best = i; 434 } 435 436 val = best << WM8903_DEEMPH_SHIFT; 437 } else { 438 best = 0; 439 val = 0; 440 } 441 442 dev_dbg(codec->dev, "Set deemphasis %d (%dHz)\n", 443 best, wm8903_deemph[best]); 444 445 return snd_soc_update_bits(codec, WM8903_DAC_DIGITAL_1, 446 WM8903_DEEMPH_MASK, val); 447 } 448 449 static int wm8903_get_deemph(struct snd_kcontrol *kcontrol, 450 struct snd_ctl_elem_value *ucontrol) 451 { 452 struct snd_soc_codec *codec = snd_soc_kcontrol_codec(kcontrol); 453 struct wm8903_priv *wm8903 = snd_soc_codec_get_drvdata(codec); 454 455 ucontrol->value.integer.value[0] = wm8903->deemph; 456 457 return 0; 458 } 459 460 static int wm8903_put_deemph(struct snd_kcontrol *kcontrol, 461 struct snd_ctl_elem_value *ucontrol) 462 { 463 struct snd_soc_codec *codec = snd_soc_kcontrol_codec(kcontrol); 464 struct wm8903_priv *wm8903 = snd_soc_codec_get_drvdata(codec); 465 unsigned int deemph = ucontrol->value.integer.value[0]; 466 int ret = 0; 467 468 if (deemph > 1) 469 return -EINVAL; 470 471 mutex_lock(&wm8903->lock); 472 if (wm8903->deemph != deemph) { 473 wm8903->deemph = deemph; 474 475 wm8903_set_deemph(codec); 476 477 ret = 1; 478 } 479 mutex_unlock(&wm8903->lock); 480 481 return ret; 482 } 483 484 /* ALSA can only do steps of .01dB */ 485 static const DECLARE_TLV_DB_SCALE(digital_tlv, -7200, 75, 1); 486 487 static const DECLARE_TLV_DB_SCALE(dac_boost_tlv, 0, 600, 0); 488 489 static const DECLARE_TLV_DB_SCALE(digital_sidetone_tlv, -3600, 300, 0); 490 static const DECLARE_TLV_DB_SCALE(out_tlv, -5700, 100, 0); 491 492 static const DECLARE_TLV_DB_SCALE(drc_tlv_thresh, 0, 75, 0); 493 static const DECLARE_TLV_DB_SCALE(drc_tlv_amp, -2250, 75, 0); 494 static const DECLARE_TLV_DB_SCALE(drc_tlv_min, 0, 600, 0); 495 static const DECLARE_TLV_DB_SCALE(drc_tlv_max, 1200, 600, 0); 496 static const DECLARE_TLV_DB_SCALE(drc_tlv_startup, -300, 50, 0); 497 498 static const char *hpf_mode_text[] = { 499 "Hi-fi", "Voice 1", "Voice 2", "Voice 3" 500 }; 501 502 static SOC_ENUM_SINGLE_DECL(hpf_mode, 503 WM8903_ADC_DIGITAL_0, 5, hpf_mode_text); 504 505 static const char *osr_text[] = { 506 "Low power", "High performance" 507 }; 508 509 static SOC_ENUM_SINGLE_DECL(adc_osr, 510 WM8903_ANALOGUE_ADC_0, 0, osr_text); 511 512 static SOC_ENUM_SINGLE_DECL(dac_osr, 513 WM8903_DAC_DIGITAL_1, 0, osr_text); 514 515 static const char *drc_slope_text[] = { 516 "1", "1/2", "1/4", "1/8", "1/16", "0" 517 }; 518 519 static SOC_ENUM_SINGLE_DECL(drc_slope_r0, 520 WM8903_DRC_2, 3, drc_slope_text); 521 522 static SOC_ENUM_SINGLE_DECL(drc_slope_r1, 523 WM8903_DRC_2, 0, drc_slope_text); 524 525 static const char *drc_attack_text[] = { 526 "instantaneous", 527 "363us", "762us", "1.45ms", "2.9ms", "5.8ms", "11.6ms", "23.2ms", 528 "46.4ms", "92.8ms", "185.6ms" 529 }; 530 531 static SOC_ENUM_SINGLE_DECL(drc_attack, 532 WM8903_DRC_1, 12, drc_attack_text); 533 534 static const char *drc_decay_text[] = { 535 "186ms", "372ms", "743ms", "1.49s", "2.97s", "5.94s", "11.89s", 536 "23.87s", "47.56s" 537 }; 538 539 static SOC_ENUM_SINGLE_DECL(drc_decay, 540 WM8903_DRC_1, 8, drc_decay_text); 541 542 static const char *drc_ff_delay_text[] = { 543 "5 samples", "9 samples" 544 }; 545 546 static SOC_ENUM_SINGLE_DECL(drc_ff_delay, 547 WM8903_DRC_0, 5, drc_ff_delay_text); 548 549 static const char *drc_qr_decay_text[] = { 550 "0.725ms", "1.45ms", "5.8ms" 551 }; 552 553 static SOC_ENUM_SINGLE_DECL(drc_qr_decay, 554 WM8903_DRC_1, 4, drc_qr_decay_text); 555 556 static const char *drc_smoothing_text[] = { 557 "Low", "Medium", "High" 558 }; 559 560 static SOC_ENUM_SINGLE_DECL(drc_smoothing, 561 WM8903_DRC_0, 11, drc_smoothing_text); 562 563 static const char *soft_mute_text[] = { 564 "Fast (fs/2)", "Slow (fs/32)" 565 }; 566 567 static SOC_ENUM_SINGLE_DECL(soft_mute, 568 WM8903_DAC_DIGITAL_1, 10, soft_mute_text); 569 570 static const char *mute_mode_text[] = { 571 "Hard", "Soft" 572 }; 573 574 static SOC_ENUM_SINGLE_DECL(mute_mode, 575 WM8903_DAC_DIGITAL_1, 9, mute_mode_text); 576 577 static const char *companding_text[] = { 578 "ulaw", "alaw" 579 }; 580 581 static SOC_ENUM_SINGLE_DECL(dac_companding, 582 WM8903_AUDIO_INTERFACE_0, 0, companding_text); 583 584 static SOC_ENUM_SINGLE_DECL(adc_companding, 585 WM8903_AUDIO_INTERFACE_0, 2, companding_text); 586 587 static const char *input_mode_text[] = { 588 "Single-Ended", "Differential Line", "Differential Mic" 589 }; 590 591 static SOC_ENUM_SINGLE_DECL(linput_mode_enum, 592 WM8903_ANALOGUE_LEFT_INPUT_1, 0, input_mode_text); 593 594 static SOC_ENUM_SINGLE_DECL(rinput_mode_enum, 595 WM8903_ANALOGUE_RIGHT_INPUT_1, 0, input_mode_text); 596 597 static const char *linput_mux_text[] = { 598 "IN1L", "IN2L", "IN3L" 599 }; 600 601 static SOC_ENUM_SINGLE_DECL(linput_enum, 602 WM8903_ANALOGUE_LEFT_INPUT_1, 2, linput_mux_text); 603 604 static SOC_ENUM_SINGLE_DECL(linput_inv_enum, 605 WM8903_ANALOGUE_LEFT_INPUT_1, 4, linput_mux_text); 606 607 static const char *rinput_mux_text[] = { 608 "IN1R", "IN2R", "IN3R" 609 }; 610 611 static SOC_ENUM_SINGLE_DECL(rinput_enum, 612 WM8903_ANALOGUE_RIGHT_INPUT_1, 2, rinput_mux_text); 613 614 static SOC_ENUM_SINGLE_DECL(rinput_inv_enum, 615 WM8903_ANALOGUE_RIGHT_INPUT_1, 4, rinput_mux_text); 616 617 618 static const char *sidetone_text[] = { 619 "None", "Left", "Right" 620 }; 621 622 static SOC_ENUM_SINGLE_DECL(lsidetone_enum, 623 WM8903_DAC_DIGITAL_0, 2, sidetone_text); 624 625 static SOC_ENUM_SINGLE_DECL(rsidetone_enum, 626 WM8903_DAC_DIGITAL_0, 0, sidetone_text); 627 628 static const char *adcinput_text[] = { 629 "ADC", "DMIC" 630 }; 631 632 static SOC_ENUM_SINGLE_DECL(adcinput_enum, 633 WM8903_CLOCK_RATE_TEST_4, 9, adcinput_text); 634 635 static const char *aif_text[] = { 636 "Left", "Right" 637 }; 638 639 static SOC_ENUM_SINGLE_DECL(lcapture_enum, 640 WM8903_AUDIO_INTERFACE_0, 7, aif_text); 641 642 static SOC_ENUM_SINGLE_DECL(rcapture_enum, 643 WM8903_AUDIO_INTERFACE_0, 6, aif_text); 644 645 static SOC_ENUM_SINGLE_DECL(lplay_enum, 646 WM8903_AUDIO_INTERFACE_0, 5, aif_text); 647 648 static SOC_ENUM_SINGLE_DECL(rplay_enum, 649 WM8903_AUDIO_INTERFACE_0, 4, aif_text); 650 651 static const struct snd_kcontrol_new wm8903_snd_controls[] = { 652 653 /* Input PGAs - No TLV since the scale depends on PGA mode */ 654 SOC_SINGLE("Left Input PGA Switch", WM8903_ANALOGUE_LEFT_INPUT_0, 655 7, 1, 1), 656 SOC_SINGLE("Left Input PGA Volume", WM8903_ANALOGUE_LEFT_INPUT_0, 657 0, 31, 0), 658 SOC_SINGLE("Left Input PGA Common Mode Switch", WM8903_ANALOGUE_LEFT_INPUT_1, 659 6, 1, 0), 660 661 SOC_SINGLE("Right Input PGA Switch", WM8903_ANALOGUE_RIGHT_INPUT_0, 662 7, 1, 1), 663 SOC_SINGLE("Right Input PGA Volume", WM8903_ANALOGUE_RIGHT_INPUT_0, 664 0, 31, 0), 665 SOC_SINGLE("Right Input PGA Common Mode Switch", WM8903_ANALOGUE_RIGHT_INPUT_1, 666 6, 1, 0), 667 668 /* ADCs */ 669 SOC_ENUM("ADC OSR", adc_osr), 670 SOC_SINGLE("HPF Switch", WM8903_ADC_DIGITAL_0, 4, 1, 0), 671 SOC_ENUM("HPF Mode", hpf_mode), 672 SOC_SINGLE("DRC Switch", WM8903_DRC_0, 15, 1, 0), 673 SOC_ENUM("DRC Compressor Slope R0", drc_slope_r0), 674 SOC_ENUM("DRC Compressor Slope R1", drc_slope_r1), 675 SOC_SINGLE_TLV("DRC Compressor Threshold Volume", WM8903_DRC_3, 5, 124, 1, 676 drc_tlv_thresh), 677 SOC_SINGLE_TLV("DRC Volume", WM8903_DRC_3, 0, 30, 1, drc_tlv_amp), 678 SOC_SINGLE_TLV("DRC Minimum Gain Volume", WM8903_DRC_1, 2, 3, 1, drc_tlv_min), 679 SOC_SINGLE_TLV("DRC Maximum Gain Volume", WM8903_DRC_1, 0, 3, 0, drc_tlv_max), 680 SOC_ENUM("DRC Attack Rate", drc_attack), 681 SOC_ENUM("DRC Decay Rate", drc_decay), 682 SOC_ENUM("DRC FF Delay", drc_ff_delay), 683 SOC_SINGLE("DRC Anticlip Switch", WM8903_DRC_0, 1, 1, 0), 684 SOC_SINGLE("DRC QR Switch", WM8903_DRC_0, 2, 1, 0), 685 SOC_SINGLE_TLV("DRC QR Threshold Volume", WM8903_DRC_0, 6, 3, 0, drc_tlv_max), 686 SOC_ENUM("DRC QR Decay Rate", drc_qr_decay), 687 SOC_SINGLE("DRC Smoothing Switch", WM8903_DRC_0, 3, 1, 0), 688 SOC_SINGLE("DRC Smoothing Hysteresis Switch", WM8903_DRC_0, 0, 1, 0), 689 SOC_ENUM("DRC Smoothing Threshold", drc_smoothing), 690 SOC_SINGLE_TLV("DRC Startup Volume", WM8903_DRC_0, 6, 18, 0, drc_tlv_startup), 691 692 SOC_DOUBLE_R_TLV("Digital Capture Volume", WM8903_ADC_DIGITAL_VOLUME_LEFT, 693 WM8903_ADC_DIGITAL_VOLUME_RIGHT, 1, 120, 0, digital_tlv), 694 SOC_ENUM("ADC Companding Mode", adc_companding), 695 SOC_SINGLE("ADC Companding Switch", WM8903_AUDIO_INTERFACE_0, 3, 1, 0), 696 697 SOC_DOUBLE_TLV("Digital Sidetone Volume", WM8903_DAC_DIGITAL_0, 4, 8, 698 12, 0, digital_sidetone_tlv), 699 700 /* DAC */ 701 SOC_ENUM("DAC OSR", dac_osr), 702 SOC_DOUBLE_R_TLV("Digital Playback Volume", WM8903_DAC_DIGITAL_VOLUME_LEFT, 703 WM8903_DAC_DIGITAL_VOLUME_RIGHT, 1, 120, 0, digital_tlv), 704 SOC_ENUM("DAC Soft Mute Rate", soft_mute), 705 SOC_ENUM("DAC Mute Mode", mute_mode), 706 SOC_SINGLE("DAC Mono Switch", WM8903_DAC_DIGITAL_1, 12, 1, 0), 707 SOC_ENUM("DAC Companding Mode", dac_companding), 708 SOC_SINGLE("DAC Companding Switch", WM8903_AUDIO_INTERFACE_0, 1, 1, 0), 709 SOC_SINGLE_TLV("DAC Boost Volume", WM8903_AUDIO_INTERFACE_0, 9, 3, 0, 710 dac_boost_tlv), 711 SOC_SINGLE_BOOL_EXT("Playback Deemphasis Switch", 0, 712 wm8903_get_deemph, wm8903_put_deemph), 713 714 /* Headphones */ 715 SOC_DOUBLE_R("Headphone Switch", 716 WM8903_ANALOGUE_OUT1_LEFT, WM8903_ANALOGUE_OUT1_RIGHT, 717 8, 1, 1), 718 SOC_DOUBLE_R("Headphone ZC Switch", 719 WM8903_ANALOGUE_OUT1_LEFT, WM8903_ANALOGUE_OUT1_RIGHT, 720 6, 1, 0), 721 SOC_DOUBLE_R_TLV("Headphone Volume", 722 WM8903_ANALOGUE_OUT1_LEFT, WM8903_ANALOGUE_OUT1_RIGHT, 723 0, 63, 0, out_tlv), 724 725 /* Line out */ 726 SOC_DOUBLE_R("Line Out Switch", 727 WM8903_ANALOGUE_OUT2_LEFT, WM8903_ANALOGUE_OUT2_RIGHT, 728 8, 1, 1), 729 SOC_DOUBLE_R("Line Out ZC Switch", 730 WM8903_ANALOGUE_OUT2_LEFT, WM8903_ANALOGUE_OUT2_RIGHT, 731 6, 1, 0), 732 SOC_DOUBLE_R_TLV("Line Out Volume", 733 WM8903_ANALOGUE_OUT2_LEFT, WM8903_ANALOGUE_OUT2_RIGHT, 734 0, 63, 0, out_tlv), 735 736 /* Speaker */ 737 SOC_DOUBLE_R("Speaker Switch", 738 WM8903_ANALOGUE_OUT3_LEFT, WM8903_ANALOGUE_OUT3_RIGHT, 8, 1, 1), 739 SOC_DOUBLE_R("Speaker ZC Switch", 740 WM8903_ANALOGUE_OUT3_LEFT, WM8903_ANALOGUE_OUT3_RIGHT, 6, 1, 0), 741 SOC_DOUBLE_R_TLV("Speaker Volume", 742 WM8903_ANALOGUE_OUT3_LEFT, WM8903_ANALOGUE_OUT3_RIGHT, 743 0, 63, 0, out_tlv), 744 }; 745 746 static const struct snd_kcontrol_new linput_mode_mux = 747 SOC_DAPM_ENUM("Left Input Mode Mux", linput_mode_enum); 748 749 static const struct snd_kcontrol_new rinput_mode_mux = 750 SOC_DAPM_ENUM("Right Input Mode Mux", rinput_mode_enum); 751 752 static const struct snd_kcontrol_new linput_mux = 753 SOC_DAPM_ENUM("Left Input Mux", linput_enum); 754 755 static const struct snd_kcontrol_new linput_inv_mux = 756 SOC_DAPM_ENUM("Left Inverting Input Mux", linput_inv_enum); 757 758 static const struct snd_kcontrol_new rinput_mux = 759 SOC_DAPM_ENUM("Right Input Mux", rinput_enum); 760 761 static const struct snd_kcontrol_new rinput_inv_mux = 762 SOC_DAPM_ENUM("Right Inverting Input Mux", rinput_inv_enum); 763 764 static const struct snd_kcontrol_new lsidetone_mux = 765 SOC_DAPM_ENUM("DACL Sidetone Mux", lsidetone_enum); 766 767 static const struct snd_kcontrol_new rsidetone_mux = 768 SOC_DAPM_ENUM("DACR Sidetone Mux", rsidetone_enum); 769 770 static const struct snd_kcontrol_new adcinput_mux = 771 SOC_DAPM_ENUM("ADC Input", adcinput_enum); 772 773 static const struct snd_kcontrol_new lcapture_mux = 774 SOC_DAPM_ENUM("Left Capture Mux", lcapture_enum); 775 776 static const struct snd_kcontrol_new rcapture_mux = 777 SOC_DAPM_ENUM("Right Capture Mux", rcapture_enum); 778 779 static const struct snd_kcontrol_new lplay_mux = 780 SOC_DAPM_ENUM("Left Playback Mux", lplay_enum); 781 782 static const struct snd_kcontrol_new rplay_mux = 783 SOC_DAPM_ENUM("Right Playback Mux", rplay_enum); 784 785 static const struct snd_kcontrol_new left_output_mixer[] = { 786 SOC_DAPM_SINGLE("DACL Switch", WM8903_ANALOGUE_LEFT_MIX_0, 3, 1, 0), 787 SOC_DAPM_SINGLE("DACR Switch", WM8903_ANALOGUE_LEFT_MIX_0, 2, 1, 0), 788 SOC_DAPM_SINGLE_W("Left Bypass Switch", WM8903_ANALOGUE_LEFT_MIX_0, 1, 1, 0), 789 SOC_DAPM_SINGLE_W("Right Bypass Switch", WM8903_ANALOGUE_LEFT_MIX_0, 0, 1, 0), 790 }; 791 792 static const struct snd_kcontrol_new right_output_mixer[] = { 793 SOC_DAPM_SINGLE("DACL Switch", WM8903_ANALOGUE_RIGHT_MIX_0, 3, 1, 0), 794 SOC_DAPM_SINGLE("DACR Switch", WM8903_ANALOGUE_RIGHT_MIX_0, 2, 1, 0), 795 SOC_DAPM_SINGLE_W("Left Bypass Switch", WM8903_ANALOGUE_RIGHT_MIX_0, 1, 1, 0), 796 SOC_DAPM_SINGLE_W("Right Bypass Switch", WM8903_ANALOGUE_RIGHT_MIX_0, 0, 1, 0), 797 }; 798 799 static const struct snd_kcontrol_new left_speaker_mixer[] = { 800 SOC_DAPM_SINGLE("DACL Switch", WM8903_ANALOGUE_SPK_MIX_LEFT_0, 3, 1, 0), 801 SOC_DAPM_SINGLE("DACR Switch", WM8903_ANALOGUE_SPK_MIX_LEFT_0, 2, 1, 0), 802 SOC_DAPM_SINGLE("Left Bypass Switch", WM8903_ANALOGUE_SPK_MIX_LEFT_0, 1, 1, 0), 803 SOC_DAPM_SINGLE("Right Bypass Switch", WM8903_ANALOGUE_SPK_MIX_LEFT_0, 804 0, 1, 0), 805 }; 806 807 static const struct snd_kcontrol_new right_speaker_mixer[] = { 808 SOC_DAPM_SINGLE("DACL Switch", WM8903_ANALOGUE_SPK_MIX_RIGHT_0, 3, 1, 0), 809 SOC_DAPM_SINGLE("DACR Switch", WM8903_ANALOGUE_SPK_MIX_RIGHT_0, 2, 1, 0), 810 SOC_DAPM_SINGLE("Left Bypass Switch", WM8903_ANALOGUE_SPK_MIX_RIGHT_0, 811 1, 1, 0), 812 SOC_DAPM_SINGLE("Right Bypass Switch", WM8903_ANALOGUE_SPK_MIX_RIGHT_0, 813 0, 1, 0), 814 }; 815 816 static const struct snd_soc_dapm_widget wm8903_dapm_widgets[] = { 817 SND_SOC_DAPM_INPUT("IN1L"), 818 SND_SOC_DAPM_INPUT("IN1R"), 819 SND_SOC_DAPM_INPUT("IN2L"), 820 SND_SOC_DAPM_INPUT("IN2R"), 821 SND_SOC_DAPM_INPUT("IN3L"), 822 SND_SOC_DAPM_INPUT("IN3R"), 823 SND_SOC_DAPM_INPUT("DMICDAT"), 824 825 SND_SOC_DAPM_OUTPUT("HPOUTL"), 826 SND_SOC_DAPM_OUTPUT("HPOUTR"), 827 SND_SOC_DAPM_OUTPUT("LINEOUTL"), 828 SND_SOC_DAPM_OUTPUT("LINEOUTR"), 829 SND_SOC_DAPM_OUTPUT("LOP"), 830 SND_SOC_DAPM_OUTPUT("LON"), 831 SND_SOC_DAPM_OUTPUT("ROP"), 832 SND_SOC_DAPM_OUTPUT("RON"), 833 834 SND_SOC_DAPM_SUPPLY("MICBIAS", WM8903_MIC_BIAS_CONTROL_0, 0, 0, NULL, 0), 835 836 SND_SOC_DAPM_MUX("Left Input Mux", SND_SOC_NOPM, 0, 0, &linput_mux), 837 SND_SOC_DAPM_MUX("Left Input Inverting Mux", SND_SOC_NOPM, 0, 0, 838 &linput_inv_mux), 839 SND_SOC_DAPM_MUX("Left Input Mode Mux", SND_SOC_NOPM, 0, 0, &linput_mode_mux), 840 841 SND_SOC_DAPM_MUX("Right Input Mux", SND_SOC_NOPM, 0, 0, &rinput_mux), 842 SND_SOC_DAPM_MUX("Right Input Inverting Mux", SND_SOC_NOPM, 0, 0, 843 &rinput_inv_mux), 844 SND_SOC_DAPM_MUX("Right Input Mode Mux", SND_SOC_NOPM, 0, 0, &rinput_mode_mux), 845 846 SND_SOC_DAPM_PGA("Left Input PGA", WM8903_POWER_MANAGEMENT_0, 1, 0, NULL, 0), 847 SND_SOC_DAPM_PGA("Right Input PGA", WM8903_POWER_MANAGEMENT_0, 0, 0, NULL, 0), 848 849 SND_SOC_DAPM_MUX("Left ADC Input", SND_SOC_NOPM, 0, 0, &adcinput_mux), 850 SND_SOC_DAPM_MUX("Right ADC Input", SND_SOC_NOPM, 0, 0, &adcinput_mux), 851 852 SND_SOC_DAPM_ADC("ADCL", NULL, WM8903_POWER_MANAGEMENT_6, 1, 0), 853 SND_SOC_DAPM_ADC("ADCR", NULL, WM8903_POWER_MANAGEMENT_6, 0, 0), 854 855 SND_SOC_DAPM_MUX("Left Capture Mux", SND_SOC_NOPM, 0, 0, &lcapture_mux), 856 SND_SOC_DAPM_MUX("Right Capture Mux", SND_SOC_NOPM, 0, 0, &rcapture_mux), 857 858 SND_SOC_DAPM_AIF_OUT("AIFTXL", "Left HiFi Capture", 0, SND_SOC_NOPM, 0, 0), 859 SND_SOC_DAPM_AIF_OUT("AIFTXR", "Right HiFi Capture", 0, SND_SOC_NOPM, 0, 0), 860 861 SND_SOC_DAPM_MUX("DACL Sidetone", SND_SOC_NOPM, 0, 0, &lsidetone_mux), 862 SND_SOC_DAPM_MUX("DACR Sidetone", SND_SOC_NOPM, 0, 0, &rsidetone_mux), 863 864 SND_SOC_DAPM_AIF_IN("AIFRXL", "Left Playback", 0, SND_SOC_NOPM, 0, 0), 865 SND_SOC_DAPM_AIF_IN("AIFRXR", "Right Playback", 0, SND_SOC_NOPM, 0, 0), 866 867 SND_SOC_DAPM_MUX("Left Playback Mux", SND_SOC_NOPM, 0, 0, &lplay_mux), 868 SND_SOC_DAPM_MUX("Right Playback Mux", SND_SOC_NOPM, 0, 0, &rplay_mux), 869 870 SND_SOC_DAPM_DAC("DACL", NULL, WM8903_POWER_MANAGEMENT_6, 3, 0), 871 SND_SOC_DAPM_DAC("DACR", NULL, WM8903_POWER_MANAGEMENT_6, 2, 0), 872 873 SND_SOC_DAPM_MIXER("Left Output Mixer", WM8903_POWER_MANAGEMENT_1, 1, 0, 874 left_output_mixer, ARRAY_SIZE(left_output_mixer)), 875 SND_SOC_DAPM_MIXER("Right Output Mixer", WM8903_POWER_MANAGEMENT_1, 0, 0, 876 right_output_mixer, ARRAY_SIZE(right_output_mixer)), 877 878 SND_SOC_DAPM_MIXER("Left Speaker Mixer", WM8903_POWER_MANAGEMENT_4, 1, 0, 879 left_speaker_mixer, ARRAY_SIZE(left_speaker_mixer)), 880 SND_SOC_DAPM_MIXER("Right Speaker Mixer", WM8903_POWER_MANAGEMENT_4, 0, 0, 881 right_speaker_mixer, ARRAY_SIZE(right_speaker_mixer)), 882 883 SND_SOC_DAPM_PGA_S("Left Headphone Output PGA", 0, WM8903_POWER_MANAGEMENT_2, 884 1, 0, NULL, 0), 885 SND_SOC_DAPM_PGA_S("Right Headphone Output PGA", 0, WM8903_POWER_MANAGEMENT_2, 886 0, 0, NULL, 0), 887 888 SND_SOC_DAPM_PGA_S("Left Line Output PGA", 0, WM8903_POWER_MANAGEMENT_3, 1, 0, 889 NULL, 0), 890 SND_SOC_DAPM_PGA_S("Right Line Output PGA", 0, WM8903_POWER_MANAGEMENT_3, 0, 0, 891 NULL, 0), 892 893 SND_SOC_DAPM_PGA_S("HPL_RMV_SHORT", 4, WM8903_ANALOGUE_HP_0, 7, 0, NULL, 0), 894 SND_SOC_DAPM_PGA_S("HPL_ENA_OUTP", 3, WM8903_ANALOGUE_HP_0, 6, 0, NULL, 0), 895 SND_SOC_DAPM_PGA_S("HPL_ENA_DLY", 2, WM8903_ANALOGUE_HP_0, 5, 0, NULL, 0), 896 SND_SOC_DAPM_PGA_S("HPL_ENA", 1, WM8903_ANALOGUE_HP_0, 4, 0, NULL, 0), 897 SND_SOC_DAPM_PGA_S("HPR_RMV_SHORT", 4, WM8903_ANALOGUE_HP_0, 3, 0, NULL, 0), 898 SND_SOC_DAPM_PGA_S("HPR_ENA_OUTP", 3, WM8903_ANALOGUE_HP_0, 2, 0, NULL, 0), 899 SND_SOC_DAPM_PGA_S("HPR_ENA_DLY", 2, WM8903_ANALOGUE_HP_0, 1, 0, NULL, 0), 900 SND_SOC_DAPM_PGA_S("HPR_ENA", 1, WM8903_ANALOGUE_HP_0, 0, 0, NULL, 0), 901 902 SND_SOC_DAPM_PGA_S("LINEOUTL_RMV_SHORT", 4, WM8903_ANALOGUE_LINEOUT_0, 7, 0, 903 NULL, 0), 904 SND_SOC_DAPM_PGA_S("LINEOUTL_ENA_OUTP", 3, WM8903_ANALOGUE_LINEOUT_0, 6, 0, 905 NULL, 0), 906 SND_SOC_DAPM_PGA_S("LINEOUTL_ENA_DLY", 2, WM8903_ANALOGUE_LINEOUT_0, 5, 0, 907 NULL, 0), 908 SND_SOC_DAPM_PGA_S("LINEOUTL_ENA", 1, WM8903_ANALOGUE_LINEOUT_0, 4, 0, 909 NULL, 0), 910 SND_SOC_DAPM_PGA_S("LINEOUTR_RMV_SHORT", 4, WM8903_ANALOGUE_LINEOUT_0, 3, 0, 911 NULL, 0), 912 SND_SOC_DAPM_PGA_S("LINEOUTR_ENA_OUTP", 3, WM8903_ANALOGUE_LINEOUT_0, 2, 0, 913 NULL, 0), 914 SND_SOC_DAPM_PGA_S("LINEOUTR_ENA_DLY", 2, WM8903_ANALOGUE_LINEOUT_0, 1, 0, 915 NULL, 0), 916 SND_SOC_DAPM_PGA_S("LINEOUTR_ENA", 1, WM8903_ANALOGUE_LINEOUT_0, 0, 0, 917 NULL, 0), 918 919 SND_SOC_DAPM_SUPPLY("DCS Master", WM8903_DC_SERVO_0, 4, 0, NULL, 0), 920 SND_SOC_DAPM_PGA_S("HPL_DCS", 3, SND_SOC_NOPM, 3, 0, wm8903_dcs_event, 921 SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD), 922 SND_SOC_DAPM_PGA_S("HPR_DCS", 3, SND_SOC_NOPM, 2, 0, wm8903_dcs_event, 923 SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD), 924 SND_SOC_DAPM_PGA_S("LINEOUTL_DCS", 3, SND_SOC_NOPM, 1, 0, wm8903_dcs_event, 925 SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD), 926 SND_SOC_DAPM_PGA_S("LINEOUTR_DCS", 3, SND_SOC_NOPM, 0, 0, wm8903_dcs_event, 927 SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD), 928 929 SND_SOC_DAPM_PGA("Left Speaker PGA", WM8903_POWER_MANAGEMENT_5, 1, 0, 930 NULL, 0), 931 SND_SOC_DAPM_PGA("Right Speaker PGA", WM8903_POWER_MANAGEMENT_5, 0, 0, 932 NULL, 0), 933 934 SND_SOC_DAPM_SUPPLY("Charge Pump", WM8903_CHARGE_PUMP_0, 0, 0, 935 wm8903_cp_event, SND_SOC_DAPM_POST_PMU), 936 SND_SOC_DAPM_SUPPLY("CLK_DSP", WM8903_CLOCK_RATES_2, 1, 0, NULL, 0), 937 SND_SOC_DAPM_SUPPLY("CLK_SYS", WM8903_CLOCK_RATES_2, 2, 0, NULL, 0), 938 }; 939 940 static const struct snd_soc_dapm_route wm8903_intercon[] = { 941 942 { "CLK_DSP", NULL, "CLK_SYS" }, 943 { "MICBIAS", NULL, "CLK_SYS" }, 944 { "HPL_DCS", NULL, "CLK_SYS" }, 945 { "HPR_DCS", NULL, "CLK_SYS" }, 946 { "LINEOUTL_DCS", NULL, "CLK_SYS" }, 947 { "LINEOUTR_DCS", NULL, "CLK_SYS" }, 948 949 { "Left Input Mux", "IN1L", "IN1L" }, 950 { "Left Input Mux", "IN2L", "IN2L" }, 951 { "Left Input Mux", "IN3L", "IN3L" }, 952 953 { "Left Input Inverting Mux", "IN1L", "IN1L" }, 954 { "Left Input Inverting Mux", "IN2L", "IN2L" }, 955 { "Left Input Inverting Mux", "IN3L", "IN3L" }, 956 957 { "Right Input Mux", "IN1R", "IN1R" }, 958 { "Right Input Mux", "IN2R", "IN2R" }, 959 { "Right Input Mux", "IN3R", "IN3R" }, 960 961 { "Right Input Inverting Mux", "IN1R", "IN1R" }, 962 { "Right Input Inverting Mux", "IN2R", "IN2R" }, 963 { "Right Input Inverting Mux", "IN3R", "IN3R" }, 964 965 { "Left Input Mode Mux", "Single-Ended", "Left Input Inverting Mux" }, 966 { "Left Input Mode Mux", "Differential Line", 967 "Left Input Mux" }, 968 { "Left Input Mode Mux", "Differential Line", 969 "Left Input Inverting Mux" }, 970 { "Left Input Mode Mux", "Differential Mic", 971 "Left Input Mux" }, 972 { "Left Input Mode Mux", "Differential Mic", 973 "Left Input Inverting Mux" }, 974 975 { "Right Input Mode Mux", "Single-Ended", 976 "Right Input Inverting Mux" }, 977 { "Right Input Mode Mux", "Differential Line", 978 "Right Input Mux" }, 979 { "Right Input Mode Mux", "Differential Line", 980 "Right Input Inverting Mux" }, 981 { "Right Input Mode Mux", "Differential Mic", 982 "Right Input Mux" }, 983 { "Right Input Mode Mux", "Differential Mic", 984 "Right Input Inverting Mux" }, 985 986 { "Left Input PGA", NULL, "Left Input Mode Mux" }, 987 { "Right Input PGA", NULL, "Right Input Mode Mux" }, 988 989 { "Left ADC Input", "ADC", "Left Input PGA" }, 990 { "Left ADC Input", "DMIC", "DMICDAT" }, 991 { "Right ADC Input", "ADC", "Right Input PGA" }, 992 { "Right ADC Input", "DMIC", "DMICDAT" }, 993 994 { "Left Capture Mux", "Left", "ADCL" }, 995 { "Left Capture Mux", "Right", "ADCR" }, 996 997 { "Right Capture Mux", "Left", "ADCL" }, 998 { "Right Capture Mux", "Right", "ADCR" }, 999 1000 { "AIFTXL", NULL, "Left Capture Mux" }, 1001 { "AIFTXR", NULL, "Right Capture Mux" }, 1002 1003 { "ADCL", NULL, "Left ADC Input" }, 1004 { "ADCL", NULL, "CLK_DSP" }, 1005 { "ADCR", NULL, "Right ADC Input" }, 1006 { "ADCR", NULL, "CLK_DSP" }, 1007 1008 { "Left Playback Mux", "Left", "AIFRXL" }, 1009 { "Left Playback Mux", "Right", "AIFRXR" }, 1010 1011 { "Right Playback Mux", "Left", "AIFRXL" }, 1012 { "Right Playback Mux", "Right", "AIFRXR" }, 1013 1014 { "DACL Sidetone", "Left", "ADCL" }, 1015 { "DACL Sidetone", "Right", "ADCR" }, 1016 { "DACR Sidetone", "Left", "ADCL" }, 1017 { "DACR Sidetone", "Right", "ADCR" }, 1018 1019 { "DACL", NULL, "Left Playback Mux" }, 1020 { "DACL", NULL, "DACL Sidetone" }, 1021 { "DACL", NULL, "CLK_DSP" }, 1022 1023 { "DACR", NULL, "Right Playback Mux" }, 1024 { "DACR", NULL, "DACR Sidetone" }, 1025 { "DACR", NULL, "CLK_DSP" }, 1026 1027 { "Left Output Mixer", "Left Bypass Switch", "Left Input PGA" }, 1028 { "Left Output Mixer", "Right Bypass Switch", "Right Input PGA" }, 1029 { "Left Output Mixer", "DACL Switch", "DACL" }, 1030 { "Left Output Mixer", "DACR Switch", "DACR" }, 1031 1032 { "Right Output Mixer", "Left Bypass Switch", "Left Input PGA" }, 1033 { "Right Output Mixer", "Right Bypass Switch", "Right Input PGA" }, 1034 { "Right Output Mixer", "DACL Switch", "DACL" }, 1035 { "Right Output Mixer", "DACR Switch", "DACR" }, 1036 1037 { "Left Speaker Mixer", "Left Bypass Switch", "Left Input PGA" }, 1038 { "Left Speaker Mixer", "Right Bypass Switch", "Right Input PGA" }, 1039 { "Left Speaker Mixer", "DACL Switch", "DACL" }, 1040 { "Left Speaker Mixer", "DACR Switch", "DACR" }, 1041 1042 { "Right Speaker Mixer", "Left Bypass Switch", "Left Input PGA" }, 1043 { "Right Speaker Mixer", "Right Bypass Switch", "Right Input PGA" }, 1044 { "Right Speaker Mixer", "DACL Switch", "DACL" }, 1045 { "Right Speaker Mixer", "DACR Switch", "DACR" }, 1046 1047 { "Left Line Output PGA", NULL, "Left Output Mixer" }, 1048 { "Right Line Output PGA", NULL, "Right Output Mixer" }, 1049 1050 { "Left Headphone Output PGA", NULL, "Left Output Mixer" }, 1051 { "Right Headphone Output PGA", NULL, "Right Output Mixer" }, 1052 1053 { "Left Speaker PGA", NULL, "Left Speaker Mixer" }, 1054 { "Right Speaker PGA", NULL, "Right Speaker Mixer" }, 1055 1056 { "HPL_ENA", NULL, "Left Headphone Output PGA" }, 1057 { "HPR_ENA", NULL, "Right Headphone Output PGA" }, 1058 { "HPL_ENA_DLY", NULL, "HPL_ENA" }, 1059 { "HPR_ENA_DLY", NULL, "HPR_ENA" }, 1060 { "LINEOUTL_ENA", NULL, "Left Line Output PGA" }, 1061 { "LINEOUTR_ENA", NULL, "Right Line Output PGA" }, 1062 { "LINEOUTL_ENA_DLY", NULL, "LINEOUTL_ENA" }, 1063 { "LINEOUTR_ENA_DLY", NULL, "LINEOUTR_ENA" }, 1064 1065 { "HPL_DCS", NULL, "DCS Master" }, 1066 { "HPR_DCS", NULL, "DCS Master" }, 1067 { "LINEOUTL_DCS", NULL, "DCS Master" }, 1068 { "LINEOUTR_DCS", NULL, "DCS Master" }, 1069 1070 { "HPL_DCS", NULL, "HPL_ENA_DLY" }, 1071 { "HPR_DCS", NULL, "HPR_ENA_DLY" }, 1072 { "LINEOUTL_DCS", NULL, "LINEOUTL_ENA_DLY" }, 1073 { "LINEOUTR_DCS", NULL, "LINEOUTR_ENA_DLY" }, 1074 1075 { "HPL_ENA_OUTP", NULL, "HPL_DCS" }, 1076 { "HPR_ENA_OUTP", NULL, "HPR_DCS" }, 1077 { "LINEOUTL_ENA_OUTP", NULL, "LINEOUTL_DCS" }, 1078 { "LINEOUTR_ENA_OUTP", NULL, "LINEOUTR_DCS" }, 1079 1080 { "HPL_RMV_SHORT", NULL, "HPL_ENA_OUTP" }, 1081 { "HPR_RMV_SHORT", NULL, "HPR_ENA_OUTP" }, 1082 { "LINEOUTL_RMV_SHORT", NULL, "LINEOUTL_ENA_OUTP" }, 1083 { "LINEOUTR_RMV_SHORT", NULL, "LINEOUTR_ENA_OUTP" }, 1084 1085 { "HPOUTL", NULL, "HPL_RMV_SHORT" }, 1086 { "HPOUTR", NULL, "HPR_RMV_SHORT" }, 1087 { "LINEOUTL", NULL, "LINEOUTL_RMV_SHORT" }, 1088 { "LINEOUTR", NULL, "LINEOUTR_RMV_SHORT" }, 1089 1090 { "LOP", NULL, "Left Speaker PGA" }, 1091 { "LON", NULL, "Left Speaker PGA" }, 1092 1093 { "ROP", NULL, "Right Speaker PGA" }, 1094 { "RON", NULL, "Right Speaker PGA" }, 1095 1096 { "Charge Pump", NULL, "CLK_DSP" }, 1097 1098 { "Left Headphone Output PGA", NULL, "Charge Pump" }, 1099 { "Right Headphone Output PGA", NULL, "Charge Pump" }, 1100 { "Left Line Output PGA", NULL, "Charge Pump" }, 1101 { "Right Line Output PGA", NULL, "Charge Pump" }, 1102 }; 1103 1104 static int wm8903_set_bias_level(struct snd_soc_codec *codec, 1105 enum snd_soc_bias_level level) 1106 { 1107 switch (level) { 1108 case SND_SOC_BIAS_ON: 1109 break; 1110 1111 case SND_SOC_BIAS_PREPARE: 1112 snd_soc_update_bits(codec, WM8903_VMID_CONTROL_0, 1113 WM8903_VMID_RES_MASK, 1114 WM8903_VMID_RES_50K); 1115 break; 1116 1117 case SND_SOC_BIAS_STANDBY: 1118 if (snd_soc_codec_get_bias_level(codec) == SND_SOC_BIAS_OFF) { 1119 snd_soc_update_bits(codec, WM8903_BIAS_CONTROL_0, 1120 WM8903_POBCTRL | WM8903_ISEL_MASK | 1121 WM8903_STARTUP_BIAS_ENA | 1122 WM8903_BIAS_ENA, 1123 WM8903_POBCTRL | 1124 (2 << WM8903_ISEL_SHIFT) | 1125 WM8903_STARTUP_BIAS_ENA); 1126 1127 snd_soc_update_bits(codec, 1128 WM8903_ANALOGUE_SPK_OUTPUT_CONTROL_0, 1129 WM8903_SPK_DISCHARGE, 1130 WM8903_SPK_DISCHARGE); 1131 1132 msleep(33); 1133 1134 snd_soc_update_bits(codec, WM8903_POWER_MANAGEMENT_5, 1135 WM8903_SPKL_ENA | WM8903_SPKR_ENA, 1136 WM8903_SPKL_ENA | WM8903_SPKR_ENA); 1137 1138 snd_soc_update_bits(codec, 1139 WM8903_ANALOGUE_SPK_OUTPUT_CONTROL_0, 1140 WM8903_SPK_DISCHARGE, 0); 1141 1142 snd_soc_update_bits(codec, WM8903_VMID_CONTROL_0, 1143 WM8903_VMID_TIE_ENA | 1144 WM8903_BUFIO_ENA | 1145 WM8903_VMID_IO_ENA | 1146 WM8903_VMID_SOFT_MASK | 1147 WM8903_VMID_RES_MASK | 1148 WM8903_VMID_BUF_ENA, 1149 WM8903_VMID_TIE_ENA | 1150 WM8903_BUFIO_ENA | 1151 WM8903_VMID_IO_ENA | 1152 (2 << WM8903_VMID_SOFT_SHIFT) | 1153 WM8903_VMID_RES_250K | 1154 WM8903_VMID_BUF_ENA); 1155 1156 msleep(129); 1157 1158 snd_soc_update_bits(codec, WM8903_POWER_MANAGEMENT_5, 1159 WM8903_SPKL_ENA | WM8903_SPKR_ENA, 1160 0); 1161 1162 snd_soc_update_bits(codec, WM8903_VMID_CONTROL_0, 1163 WM8903_VMID_SOFT_MASK, 0); 1164 1165 snd_soc_update_bits(codec, WM8903_VMID_CONTROL_0, 1166 WM8903_VMID_RES_MASK, 1167 WM8903_VMID_RES_50K); 1168 1169 snd_soc_update_bits(codec, WM8903_BIAS_CONTROL_0, 1170 WM8903_BIAS_ENA | WM8903_POBCTRL, 1171 WM8903_BIAS_ENA); 1172 1173 /* By default no bypass paths are enabled so 1174 * enable Class W support. 1175 */ 1176 dev_dbg(codec->dev, "Enabling Class W\n"); 1177 snd_soc_update_bits(codec, WM8903_CLASS_W_0, 1178 WM8903_CP_DYN_FREQ | 1179 WM8903_CP_DYN_V, 1180 WM8903_CP_DYN_FREQ | 1181 WM8903_CP_DYN_V); 1182 } 1183 1184 snd_soc_update_bits(codec, WM8903_VMID_CONTROL_0, 1185 WM8903_VMID_RES_MASK, 1186 WM8903_VMID_RES_250K); 1187 break; 1188 1189 case SND_SOC_BIAS_OFF: 1190 snd_soc_update_bits(codec, WM8903_BIAS_CONTROL_0, 1191 WM8903_BIAS_ENA, 0); 1192 1193 snd_soc_update_bits(codec, WM8903_VMID_CONTROL_0, 1194 WM8903_VMID_SOFT_MASK, 1195 2 << WM8903_VMID_SOFT_SHIFT); 1196 1197 snd_soc_update_bits(codec, WM8903_VMID_CONTROL_0, 1198 WM8903_VMID_BUF_ENA, 0); 1199 1200 msleep(290); 1201 1202 snd_soc_update_bits(codec, WM8903_VMID_CONTROL_0, 1203 WM8903_VMID_TIE_ENA | WM8903_BUFIO_ENA | 1204 WM8903_VMID_IO_ENA | WM8903_VMID_RES_MASK | 1205 WM8903_VMID_SOFT_MASK | 1206 WM8903_VMID_BUF_ENA, 0); 1207 1208 snd_soc_update_bits(codec, WM8903_BIAS_CONTROL_0, 1209 WM8903_STARTUP_BIAS_ENA, 0); 1210 break; 1211 } 1212 1213 return 0; 1214 } 1215 1216 static int wm8903_set_dai_sysclk(struct snd_soc_dai *codec_dai, 1217 int clk_id, unsigned int freq, int dir) 1218 { 1219 struct snd_soc_codec *codec = codec_dai->codec; 1220 struct wm8903_priv *wm8903 = snd_soc_codec_get_drvdata(codec); 1221 1222 wm8903->sysclk = freq; 1223 1224 return 0; 1225 } 1226 1227 static int wm8903_set_dai_fmt(struct snd_soc_dai *codec_dai, 1228 unsigned int fmt) 1229 { 1230 struct snd_soc_codec *codec = codec_dai->codec; 1231 u16 aif1 = snd_soc_read(codec, WM8903_AUDIO_INTERFACE_1); 1232 1233 aif1 &= ~(WM8903_LRCLK_DIR | WM8903_BCLK_DIR | WM8903_AIF_FMT_MASK | 1234 WM8903_AIF_LRCLK_INV | WM8903_AIF_BCLK_INV); 1235 1236 switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { 1237 case SND_SOC_DAIFMT_CBS_CFS: 1238 break; 1239 case SND_SOC_DAIFMT_CBS_CFM: 1240 aif1 |= WM8903_LRCLK_DIR; 1241 break; 1242 case SND_SOC_DAIFMT_CBM_CFM: 1243 aif1 |= WM8903_LRCLK_DIR | WM8903_BCLK_DIR; 1244 break; 1245 case SND_SOC_DAIFMT_CBM_CFS: 1246 aif1 |= WM8903_BCLK_DIR; 1247 break; 1248 default: 1249 return -EINVAL; 1250 } 1251 1252 switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { 1253 case SND_SOC_DAIFMT_DSP_A: 1254 aif1 |= 0x3; 1255 break; 1256 case SND_SOC_DAIFMT_DSP_B: 1257 aif1 |= 0x3 | WM8903_AIF_LRCLK_INV; 1258 break; 1259 case SND_SOC_DAIFMT_I2S: 1260 aif1 |= 0x2; 1261 break; 1262 case SND_SOC_DAIFMT_RIGHT_J: 1263 aif1 |= 0x1; 1264 break; 1265 case SND_SOC_DAIFMT_LEFT_J: 1266 break; 1267 default: 1268 return -EINVAL; 1269 } 1270 1271 /* Clock inversion */ 1272 switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { 1273 case SND_SOC_DAIFMT_DSP_A: 1274 case SND_SOC_DAIFMT_DSP_B: 1275 /* frame inversion not valid for DSP modes */ 1276 switch (fmt & SND_SOC_DAIFMT_INV_MASK) { 1277 case SND_SOC_DAIFMT_NB_NF: 1278 break; 1279 case SND_SOC_DAIFMT_IB_NF: 1280 aif1 |= WM8903_AIF_BCLK_INV; 1281 break; 1282 default: 1283 return -EINVAL; 1284 } 1285 break; 1286 case SND_SOC_DAIFMT_I2S: 1287 case SND_SOC_DAIFMT_RIGHT_J: 1288 case SND_SOC_DAIFMT_LEFT_J: 1289 switch (fmt & SND_SOC_DAIFMT_INV_MASK) { 1290 case SND_SOC_DAIFMT_NB_NF: 1291 break; 1292 case SND_SOC_DAIFMT_IB_IF: 1293 aif1 |= WM8903_AIF_BCLK_INV | WM8903_AIF_LRCLK_INV; 1294 break; 1295 case SND_SOC_DAIFMT_IB_NF: 1296 aif1 |= WM8903_AIF_BCLK_INV; 1297 break; 1298 case SND_SOC_DAIFMT_NB_IF: 1299 aif1 |= WM8903_AIF_LRCLK_INV; 1300 break; 1301 default: 1302 return -EINVAL; 1303 } 1304 break; 1305 default: 1306 return -EINVAL; 1307 } 1308 1309 snd_soc_write(codec, WM8903_AUDIO_INTERFACE_1, aif1); 1310 1311 return 0; 1312 } 1313 1314 static int wm8903_digital_mute(struct snd_soc_dai *codec_dai, int mute) 1315 { 1316 struct snd_soc_codec *codec = codec_dai->codec; 1317 u16 reg; 1318 1319 reg = snd_soc_read(codec, WM8903_DAC_DIGITAL_1); 1320 1321 if (mute) 1322 reg |= WM8903_DAC_MUTE; 1323 else 1324 reg &= ~WM8903_DAC_MUTE; 1325 1326 snd_soc_write(codec, WM8903_DAC_DIGITAL_1, reg); 1327 1328 return 0; 1329 } 1330 1331 /* Lookup table for CLK_SYS/fs ratio. 256fs or more is recommended 1332 * for optimal performance so we list the lower rates first and match 1333 * on the last match we find. */ 1334 static struct { 1335 int div; 1336 int rate; 1337 int mode; 1338 int mclk_div; 1339 } clk_sys_ratios[] = { 1340 { 64, 0x0, 0x0, 1 }, 1341 { 68, 0x0, 0x1, 1 }, 1342 { 125, 0x0, 0x2, 1 }, 1343 { 128, 0x1, 0x0, 1 }, 1344 { 136, 0x1, 0x1, 1 }, 1345 { 192, 0x2, 0x0, 1 }, 1346 { 204, 0x2, 0x1, 1 }, 1347 1348 { 64, 0x0, 0x0, 2 }, 1349 { 68, 0x0, 0x1, 2 }, 1350 { 125, 0x0, 0x2, 2 }, 1351 { 128, 0x1, 0x0, 2 }, 1352 { 136, 0x1, 0x1, 2 }, 1353 { 192, 0x2, 0x0, 2 }, 1354 { 204, 0x2, 0x1, 2 }, 1355 1356 { 250, 0x2, 0x2, 1 }, 1357 { 256, 0x3, 0x0, 1 }, 1358 { 272, 0x3, 0x1, 1 }, 1359 { 384, 0x4, 0x0, 1 }, 1360 { 408, 0x4, 0x1, 1 }, 1361 { 375, 0x4, 0x2, 1 }, 1362 { 512, 0x5, 0x0, 1 }, 1363 { 544, 0x5, 0x1, 1 }, 1364 { 500, 0x5, 0x2, 1 }, 1365 { 768, 0x6, 0x0, 1 }, 1366 { 816, 0x6, 0x1, 1 }, 1367 { 750, 0x6, 0x2, 1 }, 1368 { 1024, 0x7, 0x0, 1 }, 1369 { 1088, 0x7, 0x1, 1 }, 1370 { 1000, 0x7, 0x2, 1 }, 1371 { 1408, 0x8, 0x0, 1 }, 1372 { 1496, 0x8, 0x1, 1 }, 1373 { 1536, 0x9, 0x0, 1 }, 1374 { 1632, 0x9, 0x1, 1 }, 1375 { 1500, 0x9, 0x2, 1 }, 1376 1377 { 250, 0x2, 0x2, 2 }, 1378 { 256, 0x3, 0x0, 2 }, 1379 { 272, 0x3, 0x1, 2 }, 1380 { 384, 0x4, 0x0, 2 }, 1381 { 408, 0x4, 0x1, 2 }, 1382 { 375, 0x4, 0x2, 2 }, 1383 { 512, 0x5, 0x0, 2 }, 1384 { 544, 0x5, 0x1, 2 }, 1385 { 500, 0x5, 0x2, 2 }, 1386 { 768, 0x6, 0x0, 2 }, 1387 { 816, 0x6, 0x1, 2 }, 1388 { 750, 0x6, 0x2, 2 }, 1389 { 1024, 0x7, 0x0, 2 }, 1390 { 1088, 0x7, 0x1, 2 }, 1391 { 1000, 0x7, 0x2, 2 }, 1392 { 1408, 0x8, 0x0, 2 }, 1393 { 1496, 0x8, 0x1, 2 }, 1394 { 1536, 0x9, 0x0, 2 }, 1395 { 1632, 0x9, 0x1, 2 }, 1396 { 1500, 0x9, 0x2, 2 }, 1397 }; 1398 1399 /* CLK_SYS/BCLK ratios - multiplied by 10 due to .5s */ 1400 static struct { 1401 int ratio; 1402 int div; 1403 } bclk_divs[] = { 1404 { 10, 0 }, 1405 { 20, 2 }, 1406 { 30, 3 }, 1407 { 40, 4 }, 1408 { 50, 5 }, 1409 { 60, 7 }, 1410 { 80, 8 }, 1411 { 100, 9 }, 1412 { 120, 11 }, 1413 { 160, 12 }, 1414 { 200, 13 }, 1415 { 220, 14 }, 1416 { 240, 15 }, 1417 { 300, 17 }, 1418 { 320, 18 }, 1419 { 440, 19 }, 1420 { 480, 20 }, 1421 }; 1422 1423 /* Sample rates for DSP */ 1424 static struct { 1425 int rate; 1426 int value; 1427 } sample_rates[] = { 1428 { 8000, 0 }, 1429 { 11025, 1 }, 1430 { 12000, 2 }, 1431 { 16000, 3 }, 1432 { 22050, 4 }, 1433 { 24000, 5 }, 1434 { 32000, 6 }, 1435 { 44100, 7 }, 1436 { 48000, 8 }, 1437 { 88200, 9 }, 1438 { 96000, 10 }, 1439 { 0, 0 }, 1440 }; 1441 1442 static int wm8903_hw_params(struct snd_pcm_substream *substream, 1443 struct snd_pcm_hw_params *params, 1444 struct snd_soc_dai *dai) 1445 { 1446 struct snd_soc_codec *codec = dai->codec; 1447 struct wm8903_priv *wm8903 = snd_soc_codec_get_drvdata(codec); 1448 int fs = params_rate(params); 1449 int bclk; 1450 int bclk_div; 1451 int i; 1452 int dsp_config; 1453 int clk_config; 1454 int best_val; 1455 int cur_val; 1456 int clk_sys; 1457 1458 u16 aif1 = snd_soc_read(codec, WM8903_AUDIO_INTERFACE_1); 1459 u16 aif2 = snd_soc_read(codec, WM8903_AUDIO_INTERFACE_2); 1460 u16 aif3 = snd_soc_read(codec, WM8903_AUDIO_INTERFACE_3); 1461 u16 clock0 = snd_soc_read(codec, WM8903_CLOCK_RATES_0); 1462 u16 clock1 = snd_soc_read(codec, WM8903_CLOCK_RATES_1); 1463 u16 dac_digital1 = snd_soc_read(codec, WM8903_DAC_DIGITAL_1); 1464 1465 /* Enable sloping stopband filter for low sample rates */ 1466 if (fs <= 24000) 1467 dac_digital1 |= WM8903_DAC_SB_FILT; 1468 else 1469 dac_digital1 &= ~WM8903_DAC_SB_FILT; 1470 1471 /* Configure sample rate logic for DSP - choose nearest rate */ 1472 dsp_config = 0; 1473 best_val = abs(sample_rates[dsp_config].rate - fs); 1474 for (i = 1; i < ARRAY_SIZE(sample_rates); i++) { 1475 cur_val = abs(sample_rates[i].rate - fs); 1476 if (cur_val <= best_val) { 1477 dsp_config = i; 1478 best_val = cur_val; 1479 } 1480 } 1481 1482 dev_dbg(codec->dev, "DSP fs = %dHz\n", sample_rates[dsp_config].rate); 1483 clock1 &= ~WM8903_SAMPLE_RATE_MASK; 1484 clock1 |= sample_rates[dsp_config].value; 1485 1486 aif1 &= ~WM8903_AIF_WL_MASK; 1487 bclk = 2 * fs; 1488 switch (params_width(params)) { 1489 case 16: 1490 bclk *= 16; 1491 break; 1492 case 20: 1493 bclk *= 20; 1494 aif1 |= 0x4; 1495 break; 1496 case 24: 1497 bclk *= 24; 1498 aif1 |= 0x8; 1499 break; 1500 case 32: 1501 bclk *= 32; 1502 aif1 |= 0xc; 1503 break; 1504 default: 1505 return -EINVAL; 1506 } 1507 1508 dev_dbg(codec->dev, "MCLK = %dHz, target sample rate = %dHz\n", 1509 wm8903->sysclk, fs); 1510 1511 /* We may not have an MCLK which allows us to generate exactly 1512 * the clock we want, particularly with USB derived inputs, so 1513 * approximate. 1514 */ 1515 clk_config = 0; 1516 best_val = abs((wm8903->sysclk / 1517 (clk_sys_ratios[0].mclk_div * 1518 clk_sys_ratios[0].div)) - fs); 1519 for (i = 1; i < ARRAY_SIZE(clk_sys_ratios); i++) { 1520 cur_val = abs((wm8903->sysclk / 1521 (clk_sys_ratios[i].mclk_div * 1522 clk_sys_ratios[i].div)) - fs); 1523 1524 if (cur_val <= best_val) { 1525 clk_config = i; 1526 best_val = cur_val; 1527 } 1528 } 1529 1530 if (clk_sys_ratios[clk_config].mclk_div == 2) { 1531 clock0 |= WM8903_MCLKDIV2; 1532 clk_sys = wm8903->sysclk / 2; 1533 } else { 1534 clock0 &= ~WM8903_MCLKDIV2; 1535 clk_sys = wm8903->sysclk; 1536 } 1537 1538 clock1 &= ~(WM8903_CLK_SYS_RATE_MASK | 1539 WM8903_CLK_SYS_MODE_MASK); 1540 clock1 |= clk_sys_ratios[clk_config].rate << WM8903_CLK_SYS_RATE_SHIFT; 1541 clock1 |= clk_sys_ratios[clk_config].mode << WM8903_CLK_SYS_MODE_SHIFT; 1542 1543 dev_dbg(codec->dev, "CLK_SYS_RATE=%x, CLK_SYS_MODE=%x div=%d\n", 1544 clk_sys_ratios[clk_config].rate, 1545 clk_sys_ratios[clk_config].mode, 1546 clk_sys_ratios[clk_config].div); 1547 1548 dev_dbg(codec->dev, "Actual CLK_SYS = %dHz\n", clk_sys); 1549 1550 /* We may not get quite the right frequency if using 1551 * approximate clocks so look for the closest match that is 1552 * higher than the target (we need to ensure that there enough 1553 * BCLKs to clock out the samples). 1554 */ 1555 bclk_div = 0; 1556 best_val = ((clk_sys * 10) / bclk_divs[0].ratio) - bclk; 1557 i = 1; 1558 while (i < ARRAY_SIZE(bclk_divs)) { 1559 cur_val = ((clk_sys * 10) / bclk_divs[i].ratio) - bclk; 1560 if (cur_val < 0) /* BCLK table is sorted */ 1561 break; 1562 bclk_div = i; 1563 best_val = cur_val; 1564 i++; 1565 } 1566 1567 aif2 &= ~WM8903_BCLK_DIV_MASK; 1568 aif3 &= ~WM8903_LRCLK_RATE_MASK; 1569 1570 dev_dbg(codec->dev, "BCLK ratio %d for %dHz - actual BCLK = %dHz\n", 1571 bclk_divs[bclk_div].ratio / 10, bclk, 1572 (clk_sys * 10) / bclk_divs[bclk_div].ratio); 1573 1574 aif2 |= bclk_divs[bclk_div].div; 1575 aif3 |= bclk / fs; 1576 1577 wm8903->fs = params_rate(params); 1578 wm8903_set_deemph(codec); 1579 1580 snd_soc_write(codec, WM8903_CLOCK_RATES_0, clock0); 1581 snd_soc_write(codec, WM8903_CLOCK_RATES_1, clock1); 1582 snd_soc_write(codec, WM8903_AUDIO_INTERFACE_1, aif1); 1583 snd_soc_write(codec, WM8903_AUDIO_INTERFACE_2, aif2); 1584 snd_soc_write(codec, WM8903_AUDIO_INTERFACE_3, aif3); 1585 snd_soc_write(codec, WM8903_DAC_DIGITAL_1, dac_digital1); 1586 1587 return 0; 1588 } 1589 1590 /** 1591 * wm8903_mic_detect - Enable microphone detection via the WM8903 IRQ 1592 * 1593 * @codec: WM8903 codec 1594 * @jack: jack to report detection events on 1595 * @det: value to report for presence detection 1596 * @shrt: value to report for short detection 1597 * 1598 * Enable microphone detection via IRQ on the WM8903. If GPIOs are 1599 * being used to bring out signals to the processor then only platform 1600 * data configuration is needed for WM8903 and processor GPIOs should 1601 * be configured using snd_soc_jack_add_gpios() instead. 1602 * 1603 * The current threasholds for detection should be configured using 1604 * micdet_cfg in the platform data. Using this function will force on 1605 * the microphone bias for the device. 1606 */ 1607 int wm8903_mic_detect(struct snd_soc_codec *codec, struct snd_soc_jack *jack, 1608 int det, int shrt) 1609 { 1610 struct wm8903_priv *wm8903 = snd_soc_codec_get_drvdata(codec); 1611 int irq_mask = WM8903_MICDET_EINT | WM8903_MICSHRT_EINT; 1612 1613 dev_dbg(codec->dev, "Enabling microphone detection: %x %x\n", 1614 det, shrt); 1615 1616 /* Store the configuration */ 1617 wm8903->mic_jack = jack; 1618 wm8903->mic_det = det; 1619 wm8903->mic_short = shrt; 1620 1621 /* Enable interrupts we've got a report configured for */ 1622 if (det) 1623 irq_mask &= ~WM8903_MICDET_EINT; 1624 if (shrt) 1625 irq_mask &= ~WM8903_MICSHRT_EINT; 1626 1627 snd_soc_update_bits(codec, WM8903_INTERRUPT_STATUS_1_MASK, 1628 WM8903_MICDET_EINT | WM8903_MICSHRT_EINT, 1629 irq_mask); 1630 1631 if (det || shrt) { 1632 /* Enable mic detection, this may not have been set through 1633 * platform data (eg, if the defaults are OK). */ 1634 snd_soc_update_bits(codec, WM8903_WRITE_SEQUENCER_0, 1635 WM8903_WSEQ_ENA, WM8903_WSEQ_ENA); 1636 snd_soc_update_bits(codec, WM8903_MIC_BIAS_CONTROL_0, 1637 WM8903_MICDET_ENA, WM8903_MICDET_ENA); 1638 } else { 1639 snd_soc_update_bits(codec, WM8903_MIC_BIAS_CONTROL_0, 1640 WM8903_MICDET_ENA, 0); 1641 } 1642 1643 return 0; 1644 } 1645 EXPORT_SYMBOL_GPL(wm8903_mic_detect); 1646 1647 static irqreturn_t wm8903_irq(int irq, void *data) 1648 { 1649 struct wm8903_priv *wm8903 = data; 1650 int mic_report, ret; 1651 unsigned int int_val, mask, int_pol; 1652 1653 ret = regmap_read(wm8903->regmap, WM8903_INTERRUPT_STATUS_1_MASK, 1654 &mask); 1655 if (ret != 0) { 1656 dev_err(wm8903->dev, "Failed to read IRQ mask: %d\n", ret); 1657 return IRQ_NONE; 1658 } 1659 1660 ret = regmap_read(wm8903->regmap, WM8903_INTERRUPT_STATUS_1, &int_val); 1661 if (ret != 0) { 1662 dev_err(wm8903->dev, "Failed to read IRQ status: %d\n", ret); 1663 return IRQ_NONE; 1664 } 1665 1666 int_val &= ~mask; 1667 1668 if (int_val & WM8903_WSEQ_BUSY_EINT) { 1669 dev_warn(wm8903->dev, "Write sequencer done\n"); 1670 } 1671 1672 /* 1673 * The rest is microphone jack detection. We need to manually 1674 * invert the polarity of the interrupt after each event - to 1675 * simplify the code keep track of the last state we reported 1676 * and just invert the relevant bits in both the report and 1677 * the polarity register. 1678 */ 1679 mic_report = wm8903->mic_last_report; 1680 ret = regmap_read(wm8903->regmap, WM8903_INTERRUPT_POLARITY_1, 1681 &int_pol); 1682 if (ret != 0) { 1683 dev_err(wm8903->dev, "Failed to read interrupt polarity: %d\n", 1684 ret); 1685 return IRQ_HANDLED; 1686 } 1687 1688 #ifndef CONFIG_SND_SOC_WM8903_MODULE 1689 if (int_val & (WM8903_MICSHRT_EINT | WM8903_MICDET_EINT)) 1690 trace_snd_soc_jack_irq(dev_name(wm8903->dev)); 1691 #endif 1692 1693 if (int_val & WM8903_MICSHRT_EINT) { 1694 dev_dbg(wm8903->dev, "Microphone short (pol=%x)\n", int_pol); 1695 1696 mic_report ^= wm8903->mic_short; 1697 int_pol ^= WM8903_MICSHRT_INV; 1698 } 1699 1700 if (int_val & WM8903_MICDET_EINT) { 1701 dev_dbg(wm8903->dev, "Microphone detect (pol=%x)\n", int_pol); 1702 1703 mic_report ^= wm8903->mic_det; 1704 int_pol ^= WM8903_MICDET_INV; 1705 1706 msleep(wm8903->mic_delay); 1707 } 1708 1709 regmap_update_bits(wm8903->regmap, WM8903_INTERRUPT_POLARITY_1, 1710 WM8903_MICSHRT_INV | WM8903_MICDET_INV, int_pol); 1711 1712 snd_soc_jack_report(wm8903->mic_jack, mic_report, 1713 wm8903->mic_short | wm8903->mic_det); 1714 1715 wm8903->mic_last_report = mic_report; 1716 1717 return IRQ_HANDLED; 1718 } 1719 1720 #define WM8903_PLAYBACK_RATES (SNDRV_PCM_RATE_8000 |\ 1721 SNDRV_PCM_RATE_11025 | \ 1722 SNDRV_PCM_RATE_16000 | \ 1723 SNDRV_PCM_RATE_22050 | \ 1724 SNDRV_PCM_RATE_32000 | \ 1725 SNDRV_PCM_RATE_44100 | \ 1726 SNDRV_PCM_RATE_48000 | \ 1727 SNDRV_PCM_RATE_88200 | \ 1728 SNDRV_PCM_RATE_96000) 1729 1730 #define WM8903_CAPTURE_RATES (SNDRV_PCM_RATE_8000 |\ 1731 SNDRV_PCM_RATE_11025 | \ 1732 SNDRV_PCM_RATE_16000 | \ 1733 SNDRV_PCM_RATE_22050 | \ 1734 SNDRV_PCM_RATE_32000 | \ 1735 SNDRV_PCM_RATE_44100 | \ 1736 SNDRV_PCM_RATE_48000) 1737 1738 #define WM8903_FORMATS (SNDRV_PCM_FMTBIT_S16_LE |\ 1739 SNDRV_PCM_FMTBIT_S20_3LE |\ 1740 SNDRV_PCM_FMTBIT_S24_LE) 1741 1742 static const struct snd_soc_dai_ops wm8903_dai_ops = { 1743 .hw_params = wm8903_hw_params, 1744 .digital_mute = wm8903_digital_mute, 1745 .set_fmt = wm8903_set_dai_fmt, 1746 .set_sysclk = wm8903_set_dai_sysclk, 1747 }; 1748 1749 static struct snd_soc_dai_driver wm8903_dai = { 1750 .name = "wm8903-hifi", 1751 .playback = { 1752 .stream_name = "Playback", 1753 .channels_min = 2, 1754 .channels_max = 2, 1755 .rates = WM8903_PLAYBACK_RATES, 1756 .formats = WM8903_FORMATS, 1757 }, 1758 .capture = { 1759 .stream_name = "Capture", 1760 .channels_min = 2, 1761 .channels_max = 2, 1762 .rates = WM8903_CAPTURE_RATES, 1763 .formats = WM8903_FORMATS, 1764 }, 1765 .ops = &wm8903_dai_ops, 1766 .symmetric_rates = 1, 1767 }; 1768 1769 static int wm8903_resume(struct snd_soc_codec *codec) 1770 { 1771 struct wm8903_priv *wm8903 = snd_soc_codec_get_drvdata(codec); 1772 1773 regcache_sync(wm8903->regmap); 1774 1775 return 0; 1776 } 1777 1778 #ifdef CONFIG_GPIOLIB 1779 static int wm8903_gpio_request(struct gpio_chip *chip, unsigned offset) 1780 { 1781 if (offset >= WM8903_NUM_GPIO) 1782 return -EINVAL; 1783 1784 return 0; 1785 } 1786 1787 static int wm8903_gpio_direction_in(struct gpio_chip *chip, unsigned offset) 1788 { 1789 struct wm8903_priv *wm8903 = gpiochip_get_data(chip); 1790 unsigned int mask, val; 1791 int ret; 1792 1793 mask = WM8903_GP1_FN_MASK | WM8903_GP1_DIR_MASK; 1794 val = (WM8903_GPn_FN_GPIO_INPUT << WM8903_GP1_FN_SHIFT) | 1795 WM8903_GP1_DIR; 1796 1797 ret = regmap_update_bits(wm8903->regmap, 1798 WM8903_GPIO_CONTROL_1 + offset, mask, val); 1799 if (ret < 0) 1800 return ret; 1801 1802 return 0; 1803 } 1804 1805 static int wm8903_gpio_get(struct gpio_chip *chip, unsigned offset) 1806 { 1807 struct wm8903_priv *wm8903 = gpiochip_get_data(chip); 1808 unsigned int reg; 1809 1810 regmap_read(wm8903->regmap, WM8903_GPIO_CONTROL_1 + offset, ®); 1811 1812 return !!((reg & WM8903_GP1_LVL_MASK) >> WM8903_GP1_LVL_SHIFT); 1813 } 1814 1815 static int wm8903_gpio_direction_out(struct gpio_chip *chip, 1816 unsigned offset, int value) 1817 { 1818 struct wm8903_priv *wm8903 = gpiochip_get_data(chip); 1819 unsigned int mask, val; 1820 int ret; 1821 1822 mask = WM8903_GP1_FN_MASK | WM8903_GP1_DIR_MASK | WM8903_GP1_LVL_MASK; 1823 val = (WM8903_GPn_FN_GPIO_OUTPUT << WM8903_GP1_FN_SHIFT) | 1824 (value << WM8903_GP2_LVL_SHIFT); 1825 1826 ret = regmap_update_bits(wm8903->regmap, 1827 WM8903_GPIO_CONTROL_1 + offset, mask, val); 1828 if (ret < 0) 1829 return ret; 1830 1831 return 0; 1832 } 1833 1834 static void wm8903_gpio_set(struct gpio_chip *chip, unsigned offset, int value) 1835 { 1836 struct wm8903_priv *wm8903 = gpiochip_get_data(chip); 1837 1838 regmap_update_bits(wm8903->regmap, WM8903_GPIO_CONTROL_1 + offset, 1839 WM8903_GP1_LVL_MASK, 1840 !!value << WM8903_GP1_LVL_SHIFT); 1841 } 1842 1843 static const struct gpio_chip wm8903_template_chip = { 1844 .label = "wm8903", 1845 .owner = THIS_MODULE, 1846 .request = wm8903_gpio_request, 1847 .direction_input = wm8903_gpio_direction_in, 1848 .get = wm8903_gpio_get, 1849 .direction_output = wm8903_gpio_direction_out, 1850 .set = wm8903_gpio_set, 1851 .can_sleep = 1, 1852 }; 1853 1854 static void wm8903_init_gpio(struct wm8903_priv *wm8903) 1855 { 1856 struct wm8903_platform_data *pdata = wm8903->pdata; 1857 int ret; 1858 1859 wm8903->gpio_chip = wm8903_template_chip; 1860 wm8903->gpio_chip.ngpio = WM8903_NUM_GPIO; 1861 wm8903->gpio_chip.parent = wm8903->dev; 1862 1863 if (pdata->gpio_base) 1864 wm8903->gpio_chip.base = pdata->gpio_base; 1865 else 1866 wm8903->gpio_chip.base = -1; 1867 1868 ret = gpiochip_add_data(&wm8903->gpio_chip, wm8903); 1869 if (ret != 0) 1870 dev_err(wm8903->dev, "Failed to add GPIOs: %d\n", ret); 1871 } 1872 1873 static void wm8903_free_gpio(struct wm8903_priv *wm8903) 1874 { 1875 gpiochip_remove(&wm8903->gpio_chip); 1876 } 1877 #else 1878 static void wm8903_init_gpio(struct wm8903_priv *wm8903) 1879 { 1880 } 1881 1882 static void wm8903_free_gpio(struct wm8903_priv *wm8903) 1883 { 1884 } 1885 #endif 1886 1887 static const struct snd_soc_codec_driver soc_codec_dev_wm8903 = { 1888 .resume = wm8903_resume, 1889 .set_bias_level = wm8903_set_bias_level, 1890 .seq_notifier = wm8903_seq_notifier, 1891 .suspend_bias_off = true, 1892 1893 .component_driver = { 1894 .controls = wm8903_snd_controls, 1895 .num_controls = ARRAY_SIZE(wm8903_snd_controls), 1896 .dapm_widgets = wm8903_dapm_widgets, 1897 .num_dapm_widgets = ARRAY_SIZE(wm8903_dapm_widgets), 1898 .dapm_routes = wm8903_intercon, 1899 .num_dapm_routes = ARRAY_SIZE(wm8903_intercon), 1900 }, 1901 }; 1902 1903 static const struct regmap_config wm8903_regmap = { 1904 .reg_bits = 8, 1905 .val_bits = 16, 1906 1907 .max_register = WM8903_MAX_REGISTER, 1908 .volatile_reg = wm8903_volatile_register, 1909 .readable_reg = wm8903_readable_register, 1910 1911 .cache_type = REGCACHE_RBTREE, 1912 .reg_defaults = wm8903_reg_defaults, 1913 .num_reg_defaults = ARRAY_SIZE(wm8903_reg_defaults), 1914 }; 1915 1916 static int wm8903_set_pdata_irq_trigger(struct i2c_client *i2c, 1917 struct wm8903_platform_data *pdata) 1918 { 1919 struct irq_data *irq_data = irq_get_irq_data(i2c->irq); 1920 if (!irq_data) { 1921 dev_err(&i2c->dev, "Invalid IRQ: %d\n", 1922 i2c->irq); 1923 return -EINVAL; 1924 } 1925 1926 switch (irqd_get_trigger_type(irq_data)) { 1927 case IRQ_TYPE_NONE: 1928 default: 1929 /* 1930 * We assume the controller imposes no restrictions, 1931 * so we are able to select active-high 1932 */ 1933 /* Fall-through */ 1934 case IRQ_TYPE_LEVEL_HIGH: 1935 pdata->irq_active_low = false; 1936 break; 1937 case IRQ_TYPE_LEVEL_LOW: 1938 pdata->irq_active_low = true; 1939 break; 1940 } 1941 1942 return 0; 1943 } 1944 1945 static int wm8903_set_pdata_from_of(struct i2c_client *i2c, 1946 struct wm8903_platform_data *pdata) 1947 { 1948 const struct device_node *np = i2c->dev.of_node; 1949 u32 val32; 1950 int i; 1951 1952 if (of_property_read_u32(np, "micdet-cfg", &val32) >= 0) 1953 pdata->micdet_cfg = val32; 1954 1955 if (of_property_read_u32(np, "micdet-delay", &val32) >= 0) 1956 pdata->micdet_delay = val32; 1957 1958 if (of_property_read_u32_array(np, "gpio-cfg", pdata->gpio_cfg, 1959 ARRAY_SIZE(pdata->gpio_cfg)) >= 0) { 1960 /* 1961 * In device tree: 0 means "write 0", 1962 * 0xffffffff means "don't touch". 1963 * 1964 * In platform data: 0 means "don't touch", 1965 * 0x8000 means "write 0". 1966 * 1967 * Note: WM8903_GPIO_CONFIG_ZERO == 0x8000. 1968 * 1969 * Convert from DT to pdata representation here, 1970 * so no other code needs to change. 1971 */ 1972 for (i = 0; i < ARRAY_SIZE(pdata->gpio_cfg); i++) { 1973 if (pdata->gpio_cfg[i] == 0) { 1974 pdata->gpio_cfg[i] = WM8903_GPIO_CONFIG_ZERO; 1975 } else if (pdata->gpio_cfg[i] == 0xffffffff) { 1976 pdata->gpio_cfg[i] = 0; 1977 } else if (pdata->gpio_cfg[i] > 0x7fff) { 1978 dev_err(&i2c->dev, "Invalid gpio-cfg[%d] %x\n", 1979 i, pdata->gpio_cfg[i]); 1980 return -EINVAL; 1981 } 1982 } 1983 } 1984 1985 return 0; 1986 } 1987 1988 static int wm8903_i2c_probe(struct i2c_client *i2c, 1989 const struct i2c_device_id *id) 1990 { 1991 struct wm8903_platform_data *pdata = dev_get_platdata(&i2c->dev); 1992 struct wm8903_priv *wm8903; 1993 int trigger; 1994 bool mic_gpio = false; 1995 unsigned int val, irq_pol; 1996 int ret, i; 1997 1998 wm8903 = devm_kzalloc(&i2c->dev, sizeof(struct wm8903_priv), 1999 GFP_KERNEL); 2000 if (wm8903 == NULL) 2001 return -ENOMEM; 2002 2003 mutex_init(&wm8903->lock); 2004 wm8903->dev = &i2c->dev; 2005 2006 wm8903->regmap = devm_regmap_init_i2c(i2c, &wm8903_regmap); 2007 if (IS_ERR(wm8903->regmap)) { 2008 ret = PTR_ERR(wm8903->regmap); 2009 dev_err(&i2c->dev, "Failed to allocate register map: %d\n", 2010 ret); 2011 return ret; 2012 } 2013 2014 i2c_set_clientdata(i2c, wm8903); 2015 2016 /* If no platform data was supplied, create storage for defaults */ 2017 if (pdata) { 2018 wm8903->pdata = pdata; 2019 } else { 2020 wm8903->pdata = devm_kzalloc(&i2c->dev, 2021 sizeof(struct wm8903_platform_data), 2022 GFP_KERNEL); 2023 if (wm8903->pdata == NULL) { 2024 dev_err(&i2c->dev, "Failed to allocate pdata\n"); 2025 return -ENOMEM; 2026 } 2027 2028 if (i2c->irq) { 2029 ret = wm8903_set_pdata_irq_trigger(i2c, wm8903->pdata); 2030 if (ret != 0) 2031 return ret; 2032 } 2033 2034 if (i2c->dev.of_node) { 2035 ret = wm8903_set_pdata_from_of(i2c, wm8903->pdata); 2036 if (ret != 0) 2037 return ret; 2038 } 2039 } 2040 2041 pdata = wm8903->pdata; 2042 2043 for (i = 0; i < ARRAY_SIZE(wm8903->supplies); i++) 2044 wm8903->supplies[i].supply = wm8903_supply_names[i]; 2045 2046 ret = devm_regulator_bulk_get(&i2c->dev, ARRAY_SIZE(wm8903->supplies), 2047 wm8903->supplies); 2048 if (ret != 0) { 2049 dev_err(&i2c->dev, "Failed to request supplies: %d\n", ret); 2050 return ret; 2051 } 2052 2053 ret = regulator_bulk_enable(ARRAY_SIZE(wm8903->supplies), 2054 wm8903->supplies); 2055 if (ret != 0) { 2056 dev_err(&i2c->dev, "Failed to enable supplies: %d\n", ret); 2057 return ret; 2058 } 2059 2060 ret = regmap_read(wm8903->regmap, WM8903_SW_RESET_AND_ID, &val); 2061 if (ret != 0) { 2062 dev_err(&i2c->dev, "Failed to read chip ID: %d\n", ret); 2063 goto err; 2064 } 2065 if (val != 0x8903) { 2066 dev_err(&i2c->dev, "Device with ID %x is not a WM8903\n", val); 2067 ret = -ENODEV; 2068 goto err; 2069 } 2070 2071 ret = regmap_read(wm8903->regmap, WM8903_REVISION_NUMBER, &val); 2072 if (ret != 0) { 2073 dev_err(&i2c->dev, "Failed to read chip revision: %d\n", ret); 2074 goto err; 2075 } 2076 dev_info(&i2c->dev, "WM8903 revision %c\n", 2077 (val & WM8903_CHIP_REV_MASK) + 'A'); 2078 2079 /* Reset the device */ 2080 regmap_write(wm8903->regmap, WM8903_SW_RESET_AND_ID, 0x8903); 2081 2082 wm8903_init_gpio(wm8903); 2083 2084 /* Set up GPIO pin state, detect if any are MIC detect outputs */ 2085 for (i = 0; i < ARRAY_SIZE(pdata->gpio_cfg); i++) { 2086 if ((!pdata->gpio_cfg[i]) || 2087 (pdata->gpio_cfg[i] > WM8903_GPIO_CONFIG_ZERO)) 2088 continue; 2089 2090 regmap_write(wm8903->regmap, WM8903_GPIO_CONTROL_1 + i, 2091 pdata->gpio_cfg[i] & 0x7fff); 2092 2093 val = (pdata->gpio_cfg[i] & WM8903_GP1_FN_MASK) 2094 >> WM8903_GP1_FN_SHIFT; 2095 2096 switch (val) { 2097 case WM8903_GPn_FN_MICBIAS_CURRENT_DETECT: 2098 case WM8903_GPn_FN_MICBIAS_SHORT_DETECT: 2099 mic_gpio = true; 2100 break; 2101 default: 2102 break; 2103 } 2104 } 2105 2106 /* Set up microphone detection */ 2107 regmap_write(wm8903->regmap, WM8903_MIC_BIAS_CONTROL_0, 2108 pdata->micdet_cfg); 2109 2110 /* Microphone detection needs the WSEQ clock */ 2111 if (pdata->micdet_cfg) 2112 regmap_update_bits(wm8903->regmap, WM8903_WRITE_SEQUENCER_0, 2113 WM8903_WSEQ_ENA, WM8903_WSEQ_ENA); 2114 2115 /* If microphone detection is enabled by pdata but 2116 * detected via IRQ then interrupts can be lost before 2117 * the machine driver has set up microphone detection 2118 * IRQs as the IRQs are clear on read. The detection 2119 * will be enabled when the machine driver configures. 2120 */ 2121 WARN_ON(!mic_gpio && (pdata->micdet_cfg & WM8903_MICDET_ENA)); 2122 2123 wm8903->mic_delay = pdata->micdet_delay; 2124 2125 if (i2c->irq) { 2126 if (pdata->irq_active_low) { 2127 trigger = IRQF_TRIGGER_LOW; 2128 irq_pol = WM8903_IRQ_POL; 2129 } else { 2130 trigger = IRQF_TRIGGER_HIGH; 2131 irq_pol = 0; 2132 } 2133 2134 regmap_update_bits(wm8903->regmap, WM8903_INTERRUPT_CONTROL, 2135 WM8903_IRQ_POL, irq_pol); 2136 2137 ret = request_threaded_irq(i2c->irq, NULL, wm8903_irq, 2138 trigger | IRQF_ONESHOT, 2139 "wm8903", wm8903); 2140 if (ret != 0) { 2141 dev_err(wm8903->dev, "Failed to request IRQ: %d\n", 2142 ret); 2143 return ret; 2144 } 2145 2146 /* Enable write sequencer interrupts */ 2147 regmap_update_bits(wm8903->regmap, 2148 WM8903_INTERRUPT_STATUS_1_MASK, 2149 WM8903_IM_WSEQ_BUSY_EINT, 0); 2150 } 2151 2152 /* Latch volume update bits */ 2153 regmap_update_bits(wm8903->regmap, WM8903_ADC_DIGITAL_VOLUME_LEFT, 2154 WM8903_ADCVU, WM8903_ADCVU); 2155 regmap_update_bits(wm8903->regmap, WM8903_ADC_DIGITAL_VOLUME_RIGHT, 2156 WM8903_ADCVU, WM8903_ADCVU); 2157 2158 regmap_update_bits(wm8903->regmap, WM8903_DAC_DIGITAL_VOLUME_LEFT, 2159 WM8903_DACVU, WM8903_DACVU); 2160 regmap_update_bits(wm8903->regmap, WM8903_DAC_DIGITAL_VOLUME_RIGHT, 2161 WM8903_DACVU, WM8903_DACVU); 2162 2163 regmap_update_bits(wm8903->regmap, WM8903_ANALOGUE_OUT1_LEFT, 2164 WM8903_HPOUTVU, WM8903_HPOUTVU); 2165 regmap_update_bits(wm8903->regmap, WM8903_ANALOGUE_OUT1_RIGHT, 2166 WM8903_HPOUTVU, WM8903_HPOUTVU); 2167 2168 regmap_update_bits(wm8903->regmap, WM8903_ANALOGUE_OUT2_LEFT, 2169 WM8903_LINEOUTVU, WM8903_LINEOUTVU); 2170 regmap_update_bits(wm8903->regmap, WM8903_ANALOGUE_OUT2_RIGHT, 2171 WM8903_LINEOUTVU, WM8903_LINEOUTVU); 2172 2173 regmap_update_bits(wm8903->regmap, WM8903_ANALOGUE_OUT3_LEFT, 2174 WM8903_SPKVU, WM8903_SPKVU); 2175 regmap_update_bits(wm8903->regmap, WM8903_ANALOGUE_OUT3_RIGHT, 2176 WM8903_SPKVU, WM8903_SPKVU); 2177 2178 /* Enable DAC soft mute by default */ 2179 regmap_update_bits(wm8903->regmap, WM8903_DAC_DIGITAL_1, 2180 WM8903_DAC_MUTEMODE | WM8903_DAC_MUTE, 2181 WM8903_DAC_MUTEMODE | WM8903_DAC_MUTE); 2182 2183 ret = snd_soc_register_codec(&i2c->dev, 2184 &soc_codec_dev_wm8903, &wm8903_dai, 1); 2185 if (ret != 0) 2186 goto err; 2187 2188 return 0; 2189 err: 2190 regulator_bulk_disable(ARRAY_SIZE(wm8903->supplies), 2191 wm8903->supplies); 2192 return ret; 2193 } 2194 2195 static int wm8903_i2c_remove(struct i2c_client *client) 2196 { 2197 struct wm8903_priv *wm8903 = i2c_get_clientdata(client); 2198 2199 regulator_bulk_disable(ARRAY_SIZE(wm8903->supplies), 2200 wm8903->supplies); 2201 if (client->irq) 2202 free_irq(client->irq, wm8903); 2203 wm8903_free_gpio(wm8903); 2204 snd_soc_unregister_codec(&client->dev); 2205 2206 return 0; 2207 } 2208 2209 static const struct of_device_id wm8903_of_match[] = { 2210 { .compatible = "wlf,wm8903", }, 2211 {}, 2212 }; 2213 MODULE_DEVICE_TABLE(of, wm8903_of_match); 2214 2215 static const struct i2c_device_id wm8903_i2c_id[] = { 2216 { "wm8903", 0 }, 2217 { } 2218 }; 2219 MODULE_DEVICE_TABLE(i2c, wm8903_i2c_id); 2220 2221 static struct i2c_driver wm8903_i2c_driver = { 2222 .driver = { 2223 .name = "wm8903", 2224 .of_match_table = wm8903_of_match, 2225 }, 2226 .probe = wm8903_i2c_probe, 2227 .remove = wm8903_i2c_remove, 2228 .id_table = wm8903_i2c_id, 2229 }; 2230 2231 module_i2c_driver(wm8903_i2c_driver); 2232 2233 MODULE_DESCRIPTION("ASoC WM8903 driver"); 2234 MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.cm>"); 2235 MODULE_LICENSE("GPL"); 2236