xref: /openbmc/linux/sound/soc/codecs/tpa6130a2.c (revision a8da474e)
1 /*
2  * ALSA SoC Texas Instruments TPA6130A2 headset stereo amplifier driver
3  *
4  * Copyright (C) Nokia Corporation
5  *
6  * Author: Peter Ujfalusi <peter.ujfalusi@ti.com>
7  *
8  * This program is free software; you can redistribute it and/or
9  * modify it under the terms of the GNU General Public License
10  * version 2 as published by the Free Software Foundation.
11  *
12  * This program is distributed in the hope that it will be useful, but
13  * WITHOUT ANY WARRANTY; without even the implied warranty of
14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
15  * General Public License for more details.
16  *
17  * You should have received a copy of the GNU General Public License
18  * along with this program; if not, write to the Free Software
19  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
20  * 02110-1301 USA
21  */
22 
23 #include <linux/module.h>
24 #include <linux/errno.h>
25 #include <linux/device.h>
26 #include <linux/i2c.h>
27 #include <linux/gpio.h>
28 #include <linux/regulator/consumer.h>
29 #include <linux/slab.h>
30 #include <sound/tpa6130a2-plat.h>
31 #include <sound/soc.h>
32 #include <sound/tlv.h>
33 #include <linux/of.h>
34 #include <linux/of_gpio.h>
35 
36 #include "tpa6130a2.h"
37 
38 enum tpa_model {
39 	TPA6130A2,
40 	TPA6140A2,
41 };
42 
43 static struct i2c_client *tpa6130a2_client;
44 
45 /* This struct is used to save the context */
46 struct tpa6130a2_data {
47 	struct mutex mutex;
48 	unsigned char regs[TPA6130A2_CACHEREGNUM];
49 	struct regulator *supply;
50 	int power_gpio;
51 	u8 power_state:1;
52 	enum tpa_model id;
53 };
54 
55 static int tpa6130a2_i2c_read(int reg)
56 {
57 	struct tpa6130a2_data *data;
58 	int val;
59 
60 	if (WARN_ON(!tpa6130a2_client))
61 		return -EINVAL;
62 	data = i2c_get_clientdata(tpa6130a2_client);
63 
64 	/* If powered off, return the cached value */
65 	if (data->power_state) {
66 		val = i2c_smbus_read_byte_data(tpa6130a2_client, reg);
67 		if (val < 0)
68 			dev_err(&tpa6130a2_client->dev, "Read failed\n");
69 		else
70 			data->regs[reg] = val;
71 	} else {
72 		val = data->regs[reg];
73 	}
74 
75 	return val;
76 }
77 
78 static int tpa6130a2_i2c_write(int reg, u8 value)
79 {
80 	struct tpa6130a2_data *data;
81 	int val = 0;
82 
83 	if (WARN_ON(!tpa6130a2_client))
84 		return -EINVAL;
85 	data = i2c_get_clientdata(tpa6130a2_client);
86 
87 	if (data->power_state) {
88 		val = i2c_smbus_write_byte_data(tpa6130a2_client, reg, value);
89 		if (val < 0) {
90 			dev_err(&tpa6130a2_client->dev, "Write failed\n");
91 			return val;
92 		}
93 	}
94 
95 	/* Either powered on or off, we save the context */
96 	data->regs[reg] = value;
97 
98 	return val;
99 }
100 
101 static u8 tpa6130a2_read(int reg)
102 {
103 	struct tpa6130a2_data *data;
104 
105 	if (WARN_ON(!tpa6130a2_client))
106 		return 0;
107 	data = i2c_get_clientdata(tpa6130a2_client);
108 
109 	return data->regs[reg];
110 }
111 
112 static int tpa6130a2_initialize(void)
113 {
114 	struct tpa6130a2_data *data;
115 	int i, ret = 0;
116 
117 	if (WARN_ON(!tpa6130a2_client))
118 		return -EINVAL;
119 	data = i2c_get_clientdata(tpa6130a2_client);
120 
121 	for (i = 1; i < TPA6130A2_REG_VERSION; i++) {
122 		ret = tpa6130a2_i2c_write(i, data->regs[i]);
123 		if (ret < 0)
124 			break;
125 	}
126 
127 	return ret;
128 }
129 
130 static int tpa6130a2_power(u8 power)
131 {
132 	struct	tpa6130a2_data *data;
133 	u8	val;
134 	int	ret = 0;
135 
136 	if (WARN_ON(!tpa6130a2_client))
137 		return -EINVAL;
138 	data = i2c_get_clientdata(tpa6130a2_client);
139 
140 	mutex_lock(&data->mutex);
141 	if (power == data->power_state)
142 		goto exit;
143 
144 	if (power) {
145 		ret = regulator_enable(data->supply);
146 		if (ret != 0) {
147 			dev_err(&tpa6130a2_client->dev,
148 				"Failed to enable supply: %d\n", ret);
149 			goto exit;
150 		}
151 		/* Power on */
152 		if (data->power_gpio >= 0)
153 			gpio_set_value(data->power_gpio, 1);
154 
155 		data->power_state = 1;
156 		ret = tpa6130a2_initialize();
157 		if (ret < 0) {
158 			dev_err(&tpa6130a2_client->dev,
159 				"Failed to initialize chip\n");
160 			if (data->power_gpio >= 0)
161 				gpio_set_value(data->power_gpio, 0);
162 			regulator_disable(data->supply);
163 			data->power_state = 0;
164 			goto exit;
165 		}
166 	} else {
167 		/* set SWS */
168 		val = tpa6130a2_read(TPA6130A2_REG_CONTROL);
169 		val |= TPA6130A2_SWS;
170 		tpa6130a2_i2c_write(TPA6130A2_REG_CONTROL, val);
171 
172 		/* Power off */
173 		if (data->power_gpio >= 0)
174 			gpio_set_value(data->power_gpio, 0);
175 
176 		ret = regulator_disable(data->supply);
177 		if (ret != 0) {
178 			dev_err(&tpa6130a2_client->dev,
179 				"Failed to disable supply: %d\n", ret);
180 			goto exit;
181 		}
182 
183 		data->power_state = 0;
184 	}
185 
186 exit:
187 	mutex_unlock(&data->mutex);
188 	return ret;
189 }
190 
191 static int tpa6130a2_get_volsw(struct snd_kcontrol *kcontrol,
192 		struct snd_ctl_elem_value *ucontrol)
193 {
194 	struct soc_mixer_control *mc =
195 		(struct soc_mixer_control *)kcontrol->private_value;
196 	struct tpa6130a2_data *data;
197 	unsigned int reg = mc->reg;
198 	unsigned int shift = mc->shift;
199 	int max = mc->max;
200 	unsigned int mask = (1 << fls(max)) - 1;
201 	unsigned int invert = mc->invert;
202 
203 	if (WARN_ON(!tpa6130a2_client))
204 		return -EINVAL;
205 	data = i2c_get_clientdata(tpa6130a2_client);
206 
207 	mutex_lock(&data->mutex);
208 
209 	ucontrol->value.integer.value[0] =
210 		(tpa6130a2_read(reg) >> shift) & mask;
211 
212 	if (invert)
213 		ucontrol->value.integer.value[0] =
214 			max - ucontrol->value.integer.value[0];
215 
216 	mutex_unlock(&data->mutex);
217 	return 0;
218 }
219 
220 static int tpa6130a2_put_volsw(struct snd_kcontrol *kcontrol,
221 		struct snd_ctl_elem_value *ucontrol)
222 {
223 	struct soc_mixer_control *mc =
224 		(struct soc_mixer_control *)kcontrol->private_value;
225 	struct tpa6130a2_data *data;
226 	unsigned int reg = mc->reg;
227 	unsigned int shift = mc->shift;
228 	int max = mc->max;
229 	unsigned int mask = (1 << fls(max)) - 1;
230 	unsigned int invert = mc->invert;
231 	unsigned int val = (ucontrol->value.integer.value[0] & mask);
232 	unsigned int val_reg;
233 
234 	if (WARN_ON(!tpa6130a2_client))
235 		return -EINVAL;
236 	data = i2c_get_clientdata(tpa6130a2_client);
237 
238 	if (invert)
239 		val = max - val;
240 
241 	mutex_lock(&data->mutex);
242 
243 	val_reg = tpa6130a2_read(reg);
244 	if (((val_reg >> shift) & mask) == val) {
245 		mutex_unlock(&data->mutex);
246 		return 0;
247 	}
248 
249 	val_reg &= ~(mask << shift);
250 	val_reg |= val << shift;
251 	tpa6130a2_i2c_write(reg, val_reg);
252 
253 	mutex_unlock(&data->mutex);
254 
255 	return 1;
256 }
257 
258 /*
259  * TPA6130 volume. From -59.5 to 4 dB with increasing step size when going
260  * down in gain.
261  */
262 static const DECLARE_TLV_DB_RANGE(tpa6130_tlv,
263 	0, 1, TLV_DB_SCALE_ITEM(-5950, 600, 0),
264 	2, 3, TLV_DB_SCALE_ITEM(-5000, 250, 0),
265 	4, 5, TLV_DB_SCALE_ITEM(-4550, 160, 0),
266 	6, 7, TLV_DB_SCALE_ITEM(-4140, 190, 0),
267 	8, 9, TLV_DB_SCALE_ITEM(-3650, 120, 0),
268 	10, 11, TLV_DB_SCALE_ITEM(-3330, 160, 0),
269 	12, 13, TLV_DB_SCALE_ITEM(-3040, 180, 0),
270 	14, 20, TLV_DB_SCALE_ITEM(-2710, 110, 0),
271 	21, 37, TLV_DB_SCALE_ITEM(-1960, 74, 0),
272 	38, 63, TLV_DB_SCALE_ITEM(-720, 45, 0)
273 );
274 
275 static const struct snd_kcontrol_new tpa6130a2_controls[] = {
276 	SOC_SINGLE_EXT_TLV("TPA6130A2 Headphone Playback Volume",
277 		       TPA6130A2_REG_VOL_MUTE, 0, 0x3f, 0,
278 		       tpa6130a2_get_volsw, tpa6130a2_put_volsw,
279 		       tpa6130_tlv),
280 };
281 
282 static const DECLARE_TLV_DB_RANGE(tpa6140_tlv,
283 	0, 8, TLV_DB_SCALE_ITEM(-5900, 400, 0),
284 	9, 16, TLV_DB_SCALE_ITEM(-2500, 200, 0),
285 	17, 31, TLV_DB_SCALE_ITEM(-1000, 100, 0)
286 );
287 
288 static const struct snd_kcontrol_new tpa6140a2_controls[] = {
289 	SOC_SINGLE_EXT_TLV("TPA6140A2 Headphone Playback Volume",
290 		       TPA6130A2_REG_VOL_MUTE, 1, 0x1f, 0,
291 		       tpa6130a2_get_volsw, tpa6130a2_put_volsw,
292 		       tpa6140_tlv),
293 };
294 
295 /*
296  * Enable or disable channel (left or right)
297  * The bit number for mute and amplifier are the same per channel:
298  * bit 6: Right channel
299  * bit 7: Left channel
300  * in both registers.
301  */
302 static void tpa6130a2_channel_enable(u8 channel, int enable)
303 {
304 	u8	val;
305 
306 	if (enable) {
307 		/* Enable channel */
308 		/* Enable amplifier */
309 		val = tpa6130a2_read(TPA6130A2_REG_CONTROL);
310 		val |= channel;
311 		val &= ~TPA6130A2_SWS;
312 		tpa6130a2_i2c_write(TPA6130A2_REG_CONTROL, val);
313 
314 		/* Unmute channel */
315 		val = tpa6130a2_read(TPA6130A2_REG_VOL_MUTE);
316 		val &= ~channel;
317 		tpa6130a2_i2c_write(TPA6130A2_REG_VOL_MUTE, val);
318 	} else {
319 		/* Disable channel */
320 		/* Mute channel */
321 		val = tpa6130a2_read(TPA6130A2_REG_VOL_MUTE);
322 		val |= channel;
323 		tpa6130a2_i2c_write(TPA6130A2_REG_VOL_MUTE, val);
324 
325 		/* Disable amplifier */
326 		val = tpa6130a2_read(TPA6130A2_REG_CONTROL);
327 		val &= ~channel;
328 		tpa6130a2_i2c_write(TPA6130A2_REG_CONTROL, val);
329 	}
330 }
331 
332 int tpa6130a2_stereo_enable(struct snd_soc_codec *codec, int enable)
333 {
334 	int ret = 0;
335 	if (enable) {
336 		ret = tpa6130a2_power(1);
337 		if (ret < 0)
338 			return ret;
339 		tpa6130a2_channel_enable(TPA6130A2_HP_EN_R | TPA6130A2_HP_EN_L,
340 					 1);
341 	} else {
342 		tpa6130a2_channel_enable(TPA6130A2_HP_EN_R | TPA6130A2_HP_EN_L,
343 					 0);
344 		ret = tpa6130a2_power(0);
345 	}
346 
347 	return ret;
348 }
349 EXPORT_SYMBOL_GPL(tpa6130a2_stereo_enable);
350 
351 int tpa6130a2_add_controls(struct snd_soc_codec *codec)
352 {
353 	struct	tpa6130a2_data *data;
354 
355 	if (tpa6130a2_client == NULL)
356 		return -ENODEV;
357 
358 	data = i2c_get_clientdata(tpa6130a2_client);
359 
360 	if (data->id == TPA6140A2)
361 		return snd_soc_add_codec_controls(codec, tpa6140a2_controls,
362 						ARRAY_SIZE(tpa6140a2_controls));
363 	else
364 		return snd_soc_add_codec_controls(codec, tpa6130a2_controls,
365 						ARRAY_SIZE(tpa6130a2_controls));
366 }
367 EXPORT_SYMBOL_GPL(tpa6130a2_add_controls);
368 
369 static int tpa6130a2_probe(struct i2c_client *client,
370 			   const struct i2c_device_id *id)
371 {
372 	struct device *dev;
373 	struct tpa6130a2_data *data;
374 	struct tpa6130a2_platform_data *pdata = client->dev.platform_data;
375 	struct device_node *np = client->dev.of_node;
376 	const char *regulator;
377 	int ret;
378 
379 	dev = &client->dev;
380 
381 	data = devm_kzalloc(&client->dev, sizeof(*data), GFP_KERNEL);
382 	if (!data)
383 		return -ENOMEM;
384 
385 	if (pdata) {
386 		data->power_gpio = pdata->power_gpio;
387 	} else if (np) {
388 		data->power_gpio = of_get_named_gpio(np, "power-gpio", 0);
389 	} else {
390 		dev_err(dev, "Platform data not set\n");
391 		dump_stack();
392 		return -ENODEV;
393 	}
394 
395 	tpa6130a2_client = client;
396 
397 	i2c_set_clientdata(tpa6130a2_client, data);
398 
399 	data->id = id->driver_data;
400 
401 	mutex_init(&data->mutex);
402 
403 	/* Set default register values */
404 	data->regs[TPA6130A2_REG_CONTROL] =	TPA6130A2_SWS;
405 	data->regs[TPA6130A2_REG_VOL_MUTE] =	TPA6130A2_MUTE_R |
406 						TPA6130A2_MUTE_L;
407 
408 	if (data->power_gpio >= 0) {
409 		ret = devm_gpio_request(dev, data->power_gpio,
410 					"tpa6130a2 enable");
411 		if (ret < 0) {
412 			dev_err(dev, "Failed to request power GPIO (%d)\n",
413 				data->power_gpio);
414 			goto err_gpio;
415 		}
416 		gpio_direction_output(data->power_gpio, 0);
417 	}
418 
419 	switch (data->id) {
420 	default:
421 		dev_warn(dev, "Unknown TPA model (%d). Assuming 6130A2\n",
422 			 data->id);
423 	case TPA6130A2:
424 		regulator = "Vdd";
425 		break;
426 	case TPA6140A2:
427 		regulator = "AVdd";
428 		break;
429 	}
430 
431 	data->supply = devm_regulator_get(dev, regulator);
432 	if (IS_ERR(data->supply)) {
433 		ret = PTR_ERR(data->supply);
434 		dev_err(dev, "Failed to request supply: %d\n", ret);
435 		goto err_gpio;
436 	}
437 
438 	ret = tpa6130a2_power(1);
439 	if (ret != 0)
440 		goto err_gpio;
441 
442 
443 	/* Read version */
444 	ret = tpa6130a2_i2c_read(TPA6130A2_REG_VERSION) &
445 				 TPA6130A2_VERSION_MASK;
446 	if ((ret != 1) && (ret != 2))
447 		dev_warn(dev, "UNTESTED version detected (%d)\n", ret);
448 
449 	/* Disable the chip */
450 	ret = tpa6130a2_power(0);
451 	if (ret != 0)
452 		goto err_gpio;
453 
454 	return 0;
455 
456 err_gpio:
457 	tpa6130a2_client = NULL;
458 
459 	return ret;
460 }
461 
462 static int tpa6130a2_remove(struct i2c_client *client)
463 {
464 	tpa6130a2_power(0);
465 	tpa6130a2_client = NULL;
466 
467 	return 0;
468 }
469 
470 static const struct i2c_device_id tpa6130a2_id[] = {
471 	{ "tpa6130a2", TPA6130A2 },
472 	{ "tpa6140a2", TPA6140A2 },
473 	{ }
474 };
475 MODULE_DEVICE_TABLE(i2c, tpa6130a2_id);
476 
477 #if IS_ENABLED(CONFIG_OF)
478 static const struct of_device_id tpa6130a2_of_match[] = {
479 	{ .compatible = "ti,tpa6130a2", },
480 	{ .compatible = "ti,tpa6140a2" },
481 	{},
482 };
483 MODULE_DEVICE_TABLE(of, tpa6130a2_of_match);
484 #endif
485 
486 static struct i2c_driver tpa6130a2_i2c_driver = {
487 	.driver = {
488 		.name = "tpa6130a2",
489 		.of_match_table = of_match_ptr(tpa6130a2_of_match),
490 	},
491 	.probe = tpa6130a2_probe,
492 	.remove = tpa6130a2_remove,
493 	.id_table = tpa6130a2_id,
494 };
495 
496 module_i2c_driver(tpa6130a2_i2c_driver);
497 
498 MODULE_AUTHOR("Peter Ujfalusi <peter.ujfalusi@ti.com>");
499 MODULE_DESCRIPTION("TPA6130A2 Headphone amplifier driver");
500 MODULE_LICENSE("GPL");
501