xref: /openbmc/linux/sound/soc/codecs/tpa6130a2.c (revision 7132fe4f)
1 /*
2  * ALSA SoC Texas Instruments TPA6130A2 headset stereo amplifier driver
3  *
4  * Copyright (C) Nokia Corporation
5  *
6  * Author: Peter Ujfalusi <peter.ujfalusi@ti.com>
7  *
8  * This program is free software; you can redistribute it and/or
9  * modify it under the terms of the GNU General Public License
10  * version 2 as published by the Free Software Foundation.
11  *
12  * This program is distributed in the hope that it will be useful, but
13  * WITHOUT ANY WARRANTY; without even the implied warranty of
14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
15  * General Public License for more details.
16  *
17  * You should have received a copy of the GNU General Public License
18  * along with this program; if not, write to the Free Software
19  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
20  * 02110-1301 USA
21  */
22 
23 #include <linux/module.h>
24 #include <linux/errno.h>
25 #include <linux/device.h>
26 #include <linux/i2c.h>
27 #include <linux/gpio.h>
28 #include <linux/regulator/consumer.h>
29 #include <linux/slab.h>
30 #include <sound/tpa6130a2-plat.h>
31 #include <sound/soc.h>
32 #include <sound/tlv.h>
33 #include <linux/of.h>
34 #include <linux/of_gpio.h>
35 
36 #include "tpa6130a2.h"
37 
38 enum tpa_model {
39 	TPA6130A2,
40 	TPA6140A2,
41 };
42 
43 static struct i2c_client *tpa6130a2_client;
44 
45 /* This struct is used to save the context */
46 struct tpa6130a2_data {
47 	struct mutex mutex;
48 	unsigned char regs[TPA6130A2_CACHEREGNUM];
49 	struct regulator *supply;
50 	int power_gpio;
51 	u8 power_state:1;
52 	enum tpa_model id;
53 };
54 
55 static int tpa6130a2_i2c_read(int reg)
56 {
57 	struct tpa6130a2_data *data;
58 	int val;
59 
60 	if (WARN_ON(!tpa6130a2_client))
61 		return -EINVAL;
62 	data = i2c_get_clientdata(tpa6130a2_client);
63 
64 	/* If powered off, return the cached value */
65 	if (data->power_state) {
66 		val = i2c_smbus_read_byte_data(tpa6130a2_client, reg);
67 		if (val < 0)
68 			dev_err(&tpa6130a2_client->dev, "Read failed\n");
69 		else
70 			data->regs[reg] = val;
71 	} else {
72 		val = data->regs[reg];
73 	}
74 
75 	return val;
76 }
77 
78 static int tpa6130a2_i2c_write(int reg, u8 value)
79 {
80 	struct tpa6130a2_data *data;
81 	int val = 0;
82 
83 	if (WARN_ON(!tpa6130a2_client))
84 		return -EINVAL;
85 	data = i2c_get_clientdata(tpa6130a2_client);
86 
87 	if (data->power_state) {
88 		val = i2c_smbus_write_byte_data(tpa6130a2_client, reg, value);
89 		if (val < 0) {
90 			dev_err(&tpa6130a2_client->dev, "Write failed\n");
91 			return val;
92 		}
93 	}
94 
95 	/* Either powered on or off, we save the context */
96 	data->regs[reg] = value;
97 
98 	return val;
99 }
100 
101 static u8 tpa6130a2_read(int reg)
102 {
103 	struct tpa6130a2_data *data;
104 
105 	if (WARN_ON(!tpa6130a2_client))
106 		return 0;
107 	data = i2c_get_clientdata(tpa6130a2_client);
108 
109 	return data->regs[reg];
110 }
111 
112 static int tpa6130a2_initialize(void)
113 {
114 	struct tpa6130a2_data *data;
115 	int i, ret = 0;
116 
117 	if (WARN_ON(!tpa6130a2_client))
118 		return -EINVAL;
119 	data = i2c_get_clientdata(tpa6130a2_client);
120 
121 	for (i = 1; i < TPA6130A2_REG_VERSION; i++) {
122 		ret = tpa6130a2_i2c_write(i, data->regs[i]);
123 		if (ret < 0)
124 			break;
125 	}
126 
127 	return ret;
128 }
129 
130 static int tpa6130a2_power(u8 power)
131 {
132 	struct	tpa6130a2_data *data;
133 	u8	val;
134 	int	ret = 0;
135 
136 	if (WARN_ON(!tpa6130a2_client))
137 		return -EINVAL;
138 	data = i2c_get_clientdata(tpa6130a2_client);
139 
140 	mutex_lock(&data->mutex);
141 	if (power == data->power_state)
142 		goto exit;
143 
144 	if (power) {
145 		ret = regulator_enable(data->supply);
146 		if (ret != 0) {
147 			dev_err(&tpa6130a2_client->dev,
148 				"Failed to enable supply: %d\n", ret);
149 			goto exit;
150 		}
151 		/* Power on */
152 		if (data->power_gpio >= 0)
153 			gpio_set_value(data->power_gpio, 1);
154 
155 		data->power_state = 1;
156 		ret = tpa6130a2_initialize();
157 		if (ret < 0) {
158 			dev_err(&tpa6130a2_client->dev,
159 				"Failed to initialize chip\n");
160 			if (data->power_gpio >= 0)
161 				gpio_set_value(data->power_gpio, 0);
162 			regulator_disable(data->supply);
163 			data->power_state = 0;
164 			goto exit;
165 		}
166 	} else {
167 		/* set SWS */
168 		val = tpa6130a2_read(TPA6130A2_REG_CONTROL);
169 		val |= TPA6130A2_SWS;
170 		tpa6130a2_i2c_write(TPA6130A2_REG_CONTROL, val);
171 
172 		/* Power off */
173 		if (data->power_gpio >= 0)
174 			gpio_set_value(data->power_gpio, 0);
175 
176 		ret = regulator_disable(data->supply);
177 		if (ret != 0) {
178 			dev_err(&tpa6130a2_client->dev,
179 				"Failed to disable supply: %d\n", ret);
180 			goto exit;
181 		}
182 
183 		data->power_state = 0;
184 	}
185 
186 exit:
187 	mutex_unlock(&data->mutex);
188 	return ret;
189 }
190 
191 static int tpa6130a2_get_volsw(struct snd_kcontrol *kcontrol,
192 		struct snd_ctl_elem_value *ucontrol)
193 {
194 	struct soc_mixer_control *mc =
195 		(struct soc_mixer_control *)kcontrol->private_value;
196 	struct tpa6130a2_data *data;
197 	unsigned int reg = mc->reg;
198 	unsigned int shift = mc->shift;
199 	int max = mc->max;
200 	unsigned int mask = (1 << fls(max)) - 1;
201 	unsigned int invert = mc->invert;
202 
203 	if (WARN_ON(!tpa6130a2_client))
204 		return -EINVAL;
205 	data = i2c_get_clientdata(tpa6130a2_client);
206 
207 	mutex_lock(&data->mutex);
208 
209 	ucontrol->value.integer.value[0] =
210 		(tpa6130a2_read(reg) >> shift) & mask;
211 
212 	if (invert)
213 		ucontrol->value.integer.value[0] =
214 			max - ucontrol->value.integer.value[0];
215 
216 	mutex_unlock(&data->mutex);
217 	return 0;
218 }
219 
220 static int tpa6130a2_put_volsw(struct snd_kcontrol *kcontrol,
221 		struct snd_ctl_elem_value *ucontrol)
222 {
223 	struct soc_mixer_control *mc =
224 		(struct soc_mixer_control *)kcontrol->private_value;
225 	struct tpa6130a2_data *data;
226 	unsigned int reg = mc->reg;
227 	unsigned int shift = mc->shift;
228 	int max = mc->max;
229 	unsigned int mask = (1 << fls(max)) - 1;
230 	unsigned int invert = mc->invert;
231 	unsigned int val = (ucontrol->value.integer.value[0] & mask);
232 	unsigned int val_reg;
233 
234 	if (WARN_ON(!tpa6130a2_client))
235 		return -EINVAL;
236 	data = i2c_get_clientdata(tpa6130a2_client);
237 
238 	if (invert)
239 		val = max - val;
240 
241 	mutex_lock(&data->mutex);
242 
243 	val_reg = tpa6130a2_read(reg);
244 	if (((val_reg >> shift) & mask) == val) {
245 		mutex_unlock(&data->mutex);
246 		return 0;
247 	}
248 
249 	val_reg &= ~(mask << shift);
250 	val_reg |= val << shift;
251 	tpa6130a2_i2c_write(reg, val_reg);
252 
253 	mutex_unlock(&data->mutex);
254 
255 	return 1;
256 }
257 
258 /*
259  * TPA6130 volume. From -59.5 to 4 dB with increasing step size when going
260  * down in gain.
261  */
262 static const unsigned int tpa6130_tlv[] = {
263 	TLV_DB_RANGE_HEAD(10),
264 	0, 1, TLV_DB_SCALE_ITEM(-5950, 600, 0),
265 	2, 3, TLV_DB_SCALE_ITEM(-5000, 250, 0),
266 	4, 5, TLV_DB_SCALE_ITEM(-4550, 160, 0),
267 	6, 7, TLV_DB_SCALE_ITEM(-4140, 190, 0),
268 	8, 9, TLV_DB_SCALE_ITEM(-3650, 120, 0),
269 	10, 11, TLV_DB_SCALE_ITEM(-3330, 160, 0),
270 	12, 13, TLV_DB_SCALE_ITEM(-3040, 180, 0),
271 	14, 20, TLV_DB_SCALE_ITEM(-2710, 110, 0),
272 	21, 37, TLV_DB_SCALE_ITEM(-1960, 74, 0),
273 	38, 63, TLV_DB_SCALE_ITEM(-720, 45, 0),
274 };
275 
276 static const struct snd_kcontrol_new tpa6130a2_controls[] = {
277 	SOC_SINGLE_EXT_TLV("TPA6130A2 Headphone Playback Volume",
278 		       TPA6130A2_REG_VOL_MUTE, 0, 0x3f, 0,
279 		       tpa6130a2_get_volsw, tpa6130a2_put_volsw,
280 		       tpa6130_tlv),
281 };
282 
283 static const unsigned int tpa6140_tlv[] = {
284 	TLV_DB_RANGE_HEAD(3),
285 	0, 8, TLV_DB_SCALE_ITEM(-5900, 400, 0),
286 	9, 16, TLV_DB_SCALE_ITEM(-2500, 200, 0),
287 	17, 31, TLV_DB_SCALE_ITEM(-1000, 100, 0),
288 };
289 
290 static const struct snd_kcontrol_new tpa6140a2_controls[] = {
291 	SOC_SINGLE_EXT_TLV("TPA6140A2 Headphone Playback Volume",
292 		       TPA6130A2_REG_VOL_MUTE, 1, 0x1f, 0,
293 		       tpa6130a2_get_volsw, tpa6130a2_put_volsw,
294 		       tpa6140_tlv),
295 };
296 
297 /*
298  * Enable or disable channel (left or right)
299  * The bit number for mute and amplifier are the same per channel:
300  * bit 6: Right channel
301  * bit 7: Left channel
302  * in both registers.
303  */
304 static void tpa6130a2_channel_enable(u8 channel, int enable)
305 {
306 	u8	val;
307 
308 	if (enable) {
309 		/* Enable channel */
310 		/* Enable amplifier */
311 		val = tpa6130a2_read(TPA6130A2_REG_CONTROL);
312 		val |= channel;
313 		val &= ~TPA6130A2_SWS;
314 		tpa6130a2_i2c_write(TPA6130A2_REG_CONTROL, val);
315 
316 		/* Unmute channel */
317 		val = tpa6130a2_read(TPA6130A2_REG_VOL_MUTE);
318 		val &= ~channel;
319 		tpa6130a2_i2c_write(TPA6130A2_REG_VOL_MUTE, val);
320 	} else {
321 		/* Disable channel */
322 		/* Mute channel */
323 		val = tpa6130a2_read(TPA6130A2_REG_VOL_MUTE);
324 		val |= channel;
325 		tpa6130a2_i2c_write(TPA6130A2_REG_VOL_MUTE, val);
326 
327 		/* Disable amplifier */
328 		val = tpa6130a2_read(TPA6130A2_REG_CONTROL);
329 		val &= ~channel;
330 		tpa6130a2_i2c_write(TPA6130A2_REG_CONTROL, val);
331 	}
332 }
333 
334 int tpa6130a2_stereo_enable(struct snd_soc_codec *codec, int enable)
335 {
336 	int ret = 0;
337 	if (enable) {
338 		ret = tpa6130a2_power(1);
339 		if (ret < 0)
340 			return ret;
341 		tpa6130a2_channel_enable(TPA6130A2_HP_EN_R | TPA6130A2_HP_EN_L,
342 					 1);
343 	} else {
344 		tpa6130a2_channel_enable(TPA6130A2_HP_EN_R | TPA6130A2_HP_EN_L,
345 					 0);
346 		ret = tpa6130a2_power(0);
347 	}
348 
349 	return ret;
350 }
351 EXPORT_SYMBOL_GPL(tpa6130a2_stereo_enable);
352 
353 int tpa6130a2_add_controls(struct snd_soc_codec *codec)
354 {
355 	struct	tpa6130a2_data *data;
356 
357 	if (tpa6130a2_client == NULL)
358 		return -ENODEV;
359 
360 	data = i2c_get_clientdata(tpa6130a2_client);
361 
362 	if (data->id == TPA6140A2)
363 		return snd_soc_add_codec_controls(codec, tpa6140a2_controls,
364 						ARRAY_SIZE(tpa6140a2_controls));
365 	else
366 		return snd_soc_add_codec_controls(codec, tpa6130a2_controls,
367 						ARRAY_SIZE(tpa6130a2_controls));
368 }
369 EXPORT_SYMBOL_GPL(tpa6130a2_add_controls);
370 
371 static int tpa6130a2_probe(struct i2c_client *client,
372 			   const struct i2c_device_id *id)
373 {
374 	struct device *dev;
375 	struct tpa6130a2_data *data;
376 	struct tpa6130a2_platform_data *pdata = client->dev.platform_data;
377 	struct device_node *np = client->dev.of_node;
378 	const char *regulator;
379 	int ret;
380 
381 	dev = &client->dev;
382 
383 	data = devm_kzalloc(&client->dev, sizeof(*data), GFP_KERNEL);
384 	if (data == NULL) {
385 		dev_err(dev, "Can not allocate memory\n");
386 		return -ENOMEM;
387 	}
388 
389 	if (pdata) {
390 		data->power_gpio = pdata->power_gpio;
391 	} else if (np) {
392 		data->power_gpio = of_get_named_gpio(np, "power-gpio", 0);
393 	} else {
394 		dev_err(dev, "Platform data not set\n");
395 		dump_stack();
396 		return -ENODEV;
397 	}
398 
399 	tpa6130a2_client = client;
400 
401 	i2c_set_clientdata(tpa6130a2_client, data);
402 
403 	data->id = id->driver_data;
404 
405 	mutex_init(&data->mutex);
406 
407 	/* Set default register values */
408 	data->regs[TPA6130A2_REG_CONTROL] =	TPA6130A2_SWS;
409 	data->regs[TPA6130A2_REG_VOL_MUTE] =	TPA6130A2_MUTE_R |
410 						TPA6130A2_MUTE_L;
411 
412 	if (data->power_gpio >= 0) {
413 		ret = devm_gpio_request(dev, data->power_gpio,
414 					"tpa6130a2 enable");
415 		if (ret < 0) {
416 			dev_err(dev, "Failed to request power GPIO (%d)\n",
417 				data->power_gpio);
418 			goto err_gpio;
419 		}
420 		gpio_direction_output(data->power_gpio, 0);
421 	}
422 
423 	switch (data->id) {
424 	default:
425 		dev_warn(dev, "Unknown TPA model (%d). Assuming 6130A2\n",
426 			 data->id);
427 	case TPA6130A2:
428 		regulator = "Vdd";
429 		break;
430 	case TPA6140A2:
431 		regulator = "AVdd";
432 		break;
433 	}
434 
435 	data->supply = devm_regulator_get(dev, regulator);
436 	if (IS_ERR(data->supply)) {
437 		ret = PTR_ERR(data->supply);
438 		dev_err(dev, "Failed to request supply: %d\n", ret);
439 		goto err_gpio;
440 	}
441 
442 	ret = tpa6130a2_power(1);
443 	if (ret != 0)
444 		goto err_gpio;
445 
446 
447 	/* Read version */
448 	ret = tpa6130a2_i2c_read(TPA6130A2_REG_VERSION) &
449 				 TPA6130A2_VERSION_MASK;
450 	if ((ret != 1) && (ret != 2))
451 		dev_warn(dev, "UNTESTED version detected (%d)\n", ret);
452 
453 	/* Disable the chip */
454 	ret = tpa6130a2_power(0);
455 	if (ret != 0)
456 		goto err_gpio;
457 
458 	return 0;
459 
460 err_gpio:
461 	tpa6130a2_client = NULL;
462 
463 	return ret;
464 }
465 
466 static int tpa6130a2_remove(struct i2c_client *client)
467 {
468 	tpa6130a2_power(0);
469 	tpa6130a2_client = NULL;
470 
471 	return 0;
472 }
473 
474 static const struct i2c_device_id tpa6130a2_id[] = {
475 	{ "tpa6130a2", TPA6130A2 },
476 	{ "tpa6140a2", TPA6140A2 },
477 	{ }
478 };
479 MODULE_DEVICE_TABLE(i2c, tpa6130a2_id);
480 
481 #if IS_ENABLED(CONFIG_OF)
482 static const struct of_device_id tpa6130a2_of_match[] = {
483 	{ .compatible = "ti,tpa6130a2", },
484 	{ .compatible = "ti,tpa6140a2" },
485 	{},
486 };
487 MODULE_DEVICE_TABLE(of, tpa6130a2_of_match);
488 #endif
489 
490 static struct i2c_driver tpa6130a2_i2c_driver = {
491 	.driver = {
492 		.name = "tpa6130a2",
493 		.owner = THIS_MODULE,
494 		.of_match_table = of_match_ptr(tpa6130a2_of_match),
495 	},
496 	.probe = tpa6130a2_probe,
497 	.remove = tpa6130a2_remove,
498 	.id_table = tpa6130a2_id,
499 };
500 
501 module_i2c_driver(tpa6130a2_i2c_driver);
502 
503 MODULE_AUTHOR("Peter Ujfalusi <peter.ujfalusi@ti.com>");
504 MODULE_DESCRIPTION("TPA6130A2 Headphone amplifier driver");
505 MODULE_LICENSE("GPL");
506