xref: /openbmc/linux/sound/soc/codecs/tlv320aic3x.h (revision e23feb16)
1 /*
2  * ALSA SoC TLV320AIC3X codec driver
3  *
4  * Author:      Vladimir Barinov, <vbarinov@embeddedalley.com>
5  * Copyright:   (C) 2007 MontaVista Software, Inc., <source@mvista.com>
6  *
7  * This program is free software; you can redistribute it and/or modify
8  * it under the terms of the GNU General Public License version 2 as
9  * published by the Free Software Foundation.
10  */
11 
12 #ifndef _AIC3X_H
13 #define _AIC3X_H
14 
15 /* AIC3X register space */
16 #define AIC3X_CACHEREGNUM		110
17 
18 /* Page select register */
19 #define AIC3X_PAGE_SELECT		0
20 /* Software reset register */
21 #define AIC3X_RESET			1
22 /* Codec Sample rate select register */
23 #define AIC3X_SAMPLE_RATE_SEL_REG	2
24 /* PLL progrramming register A */
25 #define AIC3X_PLL_PROGA_REG		3
26 /* PLL progrramming register B */
27 #define AIC3X_PLL_PROGB_REG		4
28 /* PLL progrramming register C */
29 #define AIC3X_PLL_PROGC_REG		5
30 /* PLL progrramming register D */
31 #define AIC3X_PLL_PROGD_REG		6
32 /* Codec datapath setup register */
33 #define AIC3X_CODEC_DATAPATH_REG	7
34 /* Audio serial data interface control register A */
35 #define AIC3X_ASD_INTF_CTRLA		8
36 /* Audio serial data interface control register B */
37 #define AIC3X_ASD_INTF_CTRLB		9
38 /* Audio serial data interface control register C */
39 #define AIC3X_ASD_INTF_CTRLC		10
40 /* Audio overflow status and PLL R value programming register */
41 #define AIC3X_OVRF_STATUS_AND_PLLR_REG	11
42 /* Audio codec digital filter control register */
43 #define AIC3X_CODEC_DFILT_CTRL		12
44 /* Headset/button press detection register */
45 #define AIC3X_HEADSET_DETECT_CTRL_A	13
46 #define AIC3X_HEADSET_DETECT_CTRL_B	14
47 /* ADC PGA Gain control registers */
48 #define LADC_VOL			15
49 #define RADC_VOL			16
50 /* MIC3 control registers */
51 #define MIC3LR_2_LADC_CTRL		17
52 #define MIC3LR_2_RADC_CTRL		18
53 /* Line1 Input control registers */
54 #define LINE1L_2_LADC_CTRL		19
55 #define LINE1R_2_LADC_CTRL		21
56 #define LINE1R_2_RADC_CTRL		22
57 #define LINE1L_2_RADC_CTRL		24
58 /* Line2 Input control registers */
59 #define LINE2L_2_LADC_CTRL		20
60 #define LINE2R_2_RADC_CTRL		23
61 /* MICBIAS Control Register */
62 #define MICBIAS_CTRL			25
63 
64 /* AGC Control Registers A, B, C */
65 #define LAGC_CTRL_A			26
66 #define LAGC_CTRL_B			27
67 #define LAGC_CTRL_C			28
68 #define RAGC_CTRL_A			29
69 #define RAGC_CTRL_B			30
70 #define RAGC_CTRL_C			31
71 
72 /* DAC Power and Left High Power Output control registers */
73 #define DAC_PWR				37
74 #define HPLCOM_CFG			37
75 /* Right High Power Output control registers */
76 #define HPRCOM_CFG			38
77 /* High Power Output Stage Control Register */
78 #define HPOUT_SC			40
79 /* DAC Output Switching control registers */
80 #define DAC_LINE_MUX			41
81 /* High Power Output Driver Pop Reduction registers */
82 #define HPOUT_POP_REDUCTION		42
83 /* DAC Digital control registers */
84 #define LDAC_VOL			43
85 #define RDAC_VOL			44
86 /* Left High Power Output control registers */
87 #define LINE2L_2_HPLOUT_VOL		45
88 #define PGAL_2_HPLOUT_VOL		46
89 #define DACL1_2_HPLOUT_VOL		47
90 #define LINE2R_2_HPLOUT_VOL		48
91 #define PGAR_2_HPLOUT_VOL		49
92 #define DACR1_2_HPLOUT_VOL		50
93 #define HPLOUT_CTRL			51
94 /* Left High Power COM control registers */
95 #define LINE2L_2_HPLCOM_VOL		52
96 #define PGAL_2_HPLCOM_VOL		53
97 #define DACL1_2_HPLCOM_VOL		54
98 #define LINE2R_2_HPLCOM_VOL		55
99 #define PGAR_2_HPLCOM_VOL		56
100 #define DACR1_2_HPLCOM_VOL		57
101 #define HPLCOM_CTRL			58
102 /* Right High Power Output control registers */
103 #define LINE2L_2_HPROUT_VOL		59
104 #define PGAL_2_HPROUT_VOL		60
105 #define DACL1_2_HPROUT_VOL		61
106 #define LINE2R_2_HPROUT_VOL		62
107 #define PGAR_2_HPROUT_VOL		63
108 #define DACR1_2_HPROUT_VOL		64
109 #define HPROUT_CTRL			65
110 /* Right High Power COM control registers */
111 #define LINE2L_2_HPRCOM_VOL		66
112 #define PGAL_2_HPRCOM_VOL		67
113 #define DACL1_2_HPRCOM_VOL		68
114 #define LINE2R_2_HPRCOM_VOL		69
115 #define PGAR_2_HPRCOM_VOL		70
116 #define DACR1_2_HPRCOM_VOL		71
117 #define HPRCOM_CTRL			72
118 /* Mono Line Output Plus/Minus control registers */
119 #define LINE2L_2_MONOLOPM_VOL		73
120 #define PGAL_2_MONOLOPM_VOL		74
121 #define DACL1_2_MONOLOPM_VOL		75
122 #define LINE2R_2_MONOLOPM_VOL		76
123 #define PGAR_2_MONOLOPM_VOL		77
124 #define DACR1_2_MONOLOPM_VOL		78
125 #define MONOLOPM_CTRL			79
126 /* Class-D speaker driver on tlv320aic3007 */
127 #define CLASSD_CTRL			73
128 /* Left Line Output Plus/Minus control registers */
129 #define LINE2L_2_LLOPM_VOL		80
130 #define PGAL_2_LLOPM_VOL		81
131 #define DACL1_2_LLOPM_VOL		82
132 #define LINE2R_2_LLOPM_VOL		83
133 #define PGAR_2_LLOPM_VOL		84
134 #define DACR1_2_LLOPM_VOL		85
135 #define LLOPM_CTRL			86
136 /* Right Line Output Plus/Minus control registers */
137 #define LINE2L_2_RLOPM_VOL		87
138 #define PGAL_2_RLOPM_VOL		88
139 #define DACL1_2_RLOPM_VOL		89
140 #define LINE2R_2_RLOPM_VOL		90
141 #define PGAR_2_RLOPM_VOL		91
142 #define DACR1_2_RLOPM_VOL		92
143 #define RLOPM_CTRL			93
144 /* GPIO/IRQ registers */
145 #define AIC3X_STICKY_IRQ_FLAGS_REG	96
146 #define AIC3X_RT_IRQ_FLAGS_REG		97
147 #define AIC3X_GPIO1_REG			98
148 #define AIC3X_GPIO2_REG			99
149 #define AIC3X_GPIOA_REG			100
150 #define AIC3X_GPIOB_REG			101
151 /* Clock generation control register */
152 #define AIC3X_CLKGEN_CTRL_REG		102
153 /* New AGC registers */
154 #define LAGCN_ATTACK			103
155 #define LAGCN_DECAY			104
156 #define RAGCN_ATTACK			105
157 #define RAGCN_DECAY			106
158 /* New Programmable ADC Digital Path and I2C Bus Condition Register */
159 #define NEW_ADC_DIGITALPATH		107
160 /* Passive Analog Signal Bypass Selection During Powerdown Register */
161 #define PASSIVE_BYPASS			108
162 /* DAC Quiescent Current Adjustment Register */
163 #define DAC_ICC_ADJ			109
164 
165 /* Page select register bits */
166 #define PAGE0_SELECT		0
167 #define PAGE1_SELECT		1
168 
169 /* Audio serial data interface control register A bits */
170 #define BIT_CLK_MASTER          0x80
171 #define WORD_CLK_MASTER         0x40
172 
173 /* Codec Datapath setup register 7 */
174 #define FSREF_44100		(1 << 7)
175 #define FSREF_48000		(0 << 7)
176 #define DUAL_RATE_MODE		((1 << 5) | (1 << 6))
177 #define LDAC2LCH		(0x1 << 3)
178 #define RDAC2RCH		(0x1 << 1)
179 #define LDAC2RCH		(0x2 << 3)
180 #define RDAC2LCH		(0x2 << 1)
181 #define LDAC2MONOMIX		(0x3 << 3)
182 #define RDAC2MONOMIX		(0x3 << 1)
183 
184 /* PLL registers bitfields */
185 #define PLLP_SHIFT		0
186 #define PLLP_MASK		7
187 #define PLLQ_SHIFT		3
188 #define PLLR_SHIFT		0
189 #define PLLJ_SHIFT		2
190 #define PLLD_MSB_SHIFT		0
191 #define PLLD_LSB_SHIFT		2
192 
193 /* Clock generation register bits */
194 #define CODEC_CLKIN_PLLDIV	0
195 #define CODEC_CLKIN_CLKDIV	1
196 #define PLL_CLKIN_SHIFT		4
197 #define MCLK_SOURCE		0x0
198 #define PLL_CLKDIV_SHIFT	0
199 #define PLLCLK_IN_MASK		0x30
200 #define PLLCLK_IN_SHIFT		4
201 #define CLKDIV_IN_MASK		0xc0
202 #define CLKDIV_IN_SHIFT		6
203 /* clock in source */
204 #define CLKIN_MCLK		0
205 #define CLKIN_GPIO2		1
206 #define CLKIN_BCLK		2
207 
208 /* Software reset register bits */
209 #define SOFT_RESET		0x80
210 
211 /* PLL progrramming register A bits */
212 #define PLL_ENABLE		0x80
213 
214 /* Route bits */
215 #define ROUTE_ON		0x80
216 
217 /* Mute bits */
218 #define UNMUTE			0x08
219 #define MUTE_ON			0x80
220 
221 /* Power bits */
222 #define LADC_PWR_ON		0x04
223 #define RADC_PWR_ON		0x04
224 #define LDAC_PWR_ON		0x80
225 #define RDAC_PWR_ON		0x40
226 #define HPLOUT_PWR_ON		0x01
227 #define HPROUT_PWR_ON		0x01
228 #define HPLCOM_PWR_ON		0x01
229 #define HPRCOM_PWR_ON		0x01
230 #define MONOLOPM_PWR_ON		0x01
231 #define LLOPM_PWR_ON		0x01
232 #define RLOPM_PWR_ON	0x01
233 
234 #define INVERT_VOL(val)   (0x7f - val)
235 
236 /* Default output volume (inverted) */
237 #define DEFAULT_VOL     INVERT_VOL(0x50)
238 /* Default input volume */
239 #define DEFAULT_GAIN    0x20
240 
241 /* MICBIAS Control Register */
242 #define MICBIAS_LEVEL_SHIFT	(6)
243 #define MICBIAS_LEVEL_MASK	(3 << 6)
244 
245 /* headset detection / button API */
246 
247 /* The AIC3x supports detection of stereo headsets (GND + left + right signal)
248  * and cellular headsets (GND + speaker output + microphone input).
249  * It is recommended to enable MIC bias for this function to work properly.
250  * For more information, please refer to the datasheet. */
251 enum {
252 	AIC3X_HEADSET_DETECT_OFF	= 0,
253 	AIC3X_HEADSET_DETECT_STEREO	= 1,
254 	AIC3X_HEADSET_DETECT_CELLULAR   = 2,
255 	AIC3X_HEADSET_DETECT_BOTH	= 3
256 };
257 
258 enum {
259 	AIC3X_HEADSET_DEBOUNCE_16MS	= 0,
260 	AIC3X_HEADSET_DEBOUNCE_32MS	= 1,
261 	AIC3X_HEADSET_DEBOUNCE_64MS	= 2,
262 	AIC3X_HEADSET_DEBOUNCE_128MS	= 3,
263 	AIC3X_HEADSET_DEBOUNCE_256MS	= 4,
264 	AIC3X_HEADSET_DEBOUNCE_512MS	= 5
265 };
266 
267 enum {
268 	AIC3X_BUTTON_DEBOUNCE_0MS	= 0,
269 	AIC3X_BUTTON_DEBOUNCE_8MS	= 1,
270 	AIC3X_BUTTON_DEBOUNCE_16MS	= 2,
271 	AIC3X_BUTTON_DEBOUNCE_32MS	= 3
272 };
273 
274 #define AIC3X_HEADSET_DETECT_ENABLED	0x80
275 #define AIC3X_HEADSET_DETECT_SHIFT	5
276 #define AIC3X_HEADSET_DETECT_MASK	3
277 #define AIC3X_HEADSET_DEBOUNCE_SHIFT	2
278 #define AIC3X_HEADSET_DEBOUNCE_MASK	7
279 #define AIC3X_BUTTON_DEBOUNCE_SHIFT 	0
280 #define AIC3X_BUTTON_DEBOUNCE_MASK	3
281 
282 #endif /* _AIC3X_H */
283