1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * Texas Instruments TLV320AIC26 low power audio CODEC 4 * ALSA SoC CODEC driver 5 * 6 * Copyright (C) 2008 Secret Lab Technologies Ltd. 7 */ 8 9 #include <linux/module.h> 10 #include <linux/moduleparam.h> 11 #include <linux/init.h> 12 #include <linux/delay.h> 13 #include <linux/pm.h> 14 #include <linux/device.h> 15 #include <linux/sysfs.h> 16 #include <linux/spi/spi.h> 17 #include <linux/slab.h> 18 #include <sound/core.h> 19 #include <sound/pcm.h> 20 #include <sound/pcm_params.h> 21 #include <sound/soc.h> 22 #include <sound/initval.h> 23 24 #include "tlv320aic26.h" 25 26 MODULE_DESCRIPTION("ASoC TLV320AIC26 codec driver"); 27 MODULE_AUTHOR("Grant Likely <grant.likely@secretlab.ca>"); 28 MODULE_LICENSE("GPL"); 29 30 /* AIC26 driver private data */ 31 struct aic26 { 32 struct spi_device *spi; 33 struct regmap *regmap; 34 struct snd_soc_component *component; 35 int master; 36 int datfm; 37 int mclk; 38 39 /* Keyclick parameters */ 40 int keyclick_amplitude; 41 int keyclick_freq; 42 int keyclick_len; 43 }; 44 45 static const struct snd_soc_dapm_widget tlv320aic26_dapm_widgets[] = { 46 SND_SOC_DAPM_INPUT("MICIN"), 47 SND_SOC_DAPM_INPUT("AUX"), 48 49 SND_SOC_DAPM_OUTPUT("HPL"), 50 SND_SOC_DAPM_OUTPUT("HPR"), 51 }; 52 53 static const struct snd_soc_dapm_route tlv320aic26_dapm_routes[] = { 54 { "Capture", NULL, "MICIN" }, 55 { "Capture", NULL, "AUX" }, 56 57 { "HPL", NULL, "Playback" }, 58 { "HPR", NULL, "Playback" }, 59 }; 60 61 /* --------------------------------------------------------------------- 62 * Digital Audio Interface Operations 63 */ 64 static int aic26_hw_params(struct snd_pcm_substream *substream, 65 struct snd_pcm_hw_params *params, 66 struct snd_soc_dai *dai) 67 { 68 struct snd_soc_component *component = dai->component; 69 struct aic26 *aic26 = snd_soc_component_get_drvdata(component); 70 int fsref, divisor, wlen, pval, jval, dval, qval; 71 u16 reg; 72 73 dev_dbg(&aic26->spi->dev, "aic26_hw_params(substream=%p, params=%p)\n", 74 substream, params); 75 dev_dbg(&aic26->spi->dev, "rate=%i width=%d\n", params_rate(params), 76 params_width(params)); 77 78 switch (params_rate(params)) { 79 case 8000: fsref = 48000; divisor = AIC26_DIV_6; break; 80 case 11025: fsref = 44100; divisor = AIC26_DIV_4; break; 81 case 12000: fsref = 48000; divisor = AIC26_DIV_4; break; 82 case 16000: fsref = 48000; divisor = AIC26_DIV_3; break; 83 case 22050: fsref = 44100; divisor = AIC26_DIV_2; break; 84 case 24000: fsref = 48000; divisor = AIC26_DIV_2; break; 85 case 32000: fsref = 48000; divisor = AIC26_DIV_1_5; break; 86 case 44100: fsref = 44100; divisor = AIC26_DIV_1; break; 87 case 48000: fsref = 48000; divisor = AIC26_DIV_1; break; 88 default: 89 dev_dbg(&aic26->spi->dev, "bad rate\n"); return -EINVAL; 90 } 91 92 /* select data word length */ 93 switch (params_width(params)) { 94 case 8: wlen = AIC26_WLEN_16; break; 95 case 16: wlen = AIC26_WLEN_16; break; 96 case 24: wlen = AIC26_WLEN_24; break; 97 case 32: wlen = AIC26_WLEN_32; break; 98 default: 99 dev_dbg(&aic26->spi->dev, "bad format\n"); return -EINVAL; 100 } 101 102 /** 103 * Configure PLL 104 * fsref = (mclk * PLLM) / 2048 105 * where PLLM = J.DDDD (DDDD register ranges from 0 to 9999, decimal) 106 */ 107 pval = 1; 108 /* compute J portion of multiplier */ 109 jval = fsref / (aic26->mclk / 2048); 110 /* compute fractional DDDD component of multiplier */ 111 dval = fsref - (jval * (aic26->mclk / 2048)); 112 dval = (10000 * dval) / (aic26->mclk / 2048); 113 dev_dbg(&aic26->spi->dev, "Setting PLLM to %d.%04d\n", jval, dval); 114 qval = 0; 115 reg = 0x8000 | qval << 11 | pval << 8 | jval << 2; 116 snd_soc_component_write(component, AIC26_REG_PLL_PROG1, reg); 117 reg = dval << 2; 118 snd_soc_component_write(component, AIC26_REG_PLL_PROG2, reg); 119 120 /* Audio Control 3 (master mode, fsref rate) */ 121 if (aic26->master) 122 reg = 0x0800; 123 if (fsref == 48000) 124 reg = 0x2000; 125 snd_soc_component_update_bits(component, AIC26_REG_AUDIO_CTRL3, 0xf800, reg); 126 127 /* Audio Control 1 (FSref divisor) */ 128 reg = wlen | aic26->datfm | (divisor << 3) | divisor; 129 snd_soc_component_update_bits(component, AIC26_REG_AUDIO_CTRL1, 0xfff, reg); 130 131 return 0; 132 } 133 134 /* 135 * aic26_mute - Mute control to reduce noise when changing audio format 136 */ 137 static int aic26_mute(struct snd_soc_dai *dai, int mute, int direction) 138 { 139 struct snd_soc_component *component = dai->component; 140 struct aic26 *aic26 = snd_soc_component_get_drvdata(component); 141 u16 reg; 142 143 dev_dbg(&aic26->spi->dev, "aic26_mute(dai=%p, mute=%i)\n", 144 dai, mute); 145 146 if (mute) 147 reg = 0x8080; 148 else 149 reg = 0; 150 snd_soc_component_update_bits(component, AIC26_REG_DAC_GAIN, 0x8000, reg); 151 152 return 0; 153 } 154 155 static int aic26_set_sysclk(struct snd_soc_dai *codec_dai, 156 int clk_id, unsigned int freq, int dir) 157 { 158 struct snd_soc_component *component = codec_dai->component; 159 struct aic26 *aic26 = snd_soc_component_get_drvdata(component); 160 161 dev_dbg(&aic26->spi->dev, "aic26_set_sysclk(dai=%p, clk_id==%i," 162 " freq=%i, dir=%i)\n", 163 codec_dai, clk_id, freq, dir); 164 165 /* MCLK needs to fall between 2MHz and 50 MHz */ 166 if ((freq < 2000000) || (freq > 50000000)) 167 return -EINVAL; 168 169 aic26->mclk = freq; 170 return 0; 171 } 172 173 static int aic26_set_fmt(struct snd_soc_dai *codec_dai, unsigned int fmt) 174 { 175 struct snd_soc_component *component = codec_dai->component; 176 struct aic26 *aic26 = snd_soc_component_get_drvdata(component); 177 178 dev_dbg(&aic26->spi->dev, "aic26_set_fmt(dai=%p, fmt==%i)\n", 179 codec_dai, fmt); 180 181 /* set master/slave audio interface */ 182 switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { 183 case SND_SOC_DAIFMT_CBM_CFM: aic26->master = 1; break; 184 case SND_SOC_DAIFMT_CBS_CFS: aic26->master = 0; break; 185 default: 186 dev_dbg(&aic26->spi->dev, "bad master\n"); return -EINVAL; 187 } 188 189 /* interface format */ 190 switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { 191 case SND_SOC_DAIFMT_I2S: aic26->datfm = AIC26_DATFM_I2S; break; 192 case SND_SOC_DAIFMT_DSP_A: aic26->datfm = AIC26_DATFM_DSP; break; 193 case SND_SOC_DAIFMT_RIGHT_J: aic26->datfm = AIC26_DATFM_RIGHTJ; break; 194 case SND_SOC_DAIFMT_LEFT_J: aic26->datfm = AIC26_DATFM_LEFTJ; break; 195 default: 196 dev_dbg(&aic26->spi->dev, "bad format\n"); return -EINVAL; 197 } 198 199 return 0; 200 } 201 202 /* --------------------------------------------------------------------- 203 * Digital Audio Interface Definition 204 */ 205 #define AIC26_RATES (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 |\ 206 SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_22050 |\ 207 SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 |\ 208 SNDRV_PCM_RATE_48000) 209 #define AIC26_FORMATS (SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_BE |\ 210 SNDRV_PCM_FMTBIT_S24_BE | SNDRV_PCM_FMTBIT_S32_BE) 211 212 static const struct snd_soc_dai_ops aic26_dai_ops = { 213 .hw_params = aic26_hw_params, 214 .mute_stream = aic26_mute, 215 .set_sysclk = aic26_set_sysclk, 216 .set_fmt = aic26_set_fmt, 217 .no_capture_mute = 1, 218 }; 219 220 static struct snd_soc_dai_driver aic26_dai = { 221 .name = "tlv320aic26-hifi", 222 .playback = { 223 .stream_name = "Playback", 224 .channels_min = 2, 225 .channels_max = 2, 226 .rates = AIC26_RATES, 227 .formats = AIC26_FORMATS, 228 }, 229 .capture = { 230 .stream_name = "Capture", 231 .channels_min = 2, 232 .channels_max = 2, 233 .rates = AIC26_RATES, 234 .formats = AIC26_FORMATS, 235 }, 236 .ops = &aic26_dai_ops, 237 }; 238 239 /* --------------------------------------------------------------------- 240 * ALSA controls 241 */ 242 static const char *aic26_capture_src_text[] = {"Mic", "Aux"}; 243 static SOC_ENUM_SINGLE_DECL(aic26_capture_src_enum, 244 AIC26_REG_AUDIO_CTRL1, 12, 245 aic26_capture_src_text); 246 247 static const struct snd_kcontrol_new aic26_snd_controls[] = { 248 /* Output */ 249 SOC_DOUBLE("PCM Playback Volume", AIC26_REG_DAC_GAIN, 8, 0, 0x7f, 1), 250 SOC_DOUBLE("PCM Playback Switch", AIC26_REG_DAC_GAIN, 15, 7, 1, 1), 251 SOC_SINGLE("PCM Capture Volume", AIC26_REG_ADC_GAIN, 8, 0x7f, 0), 252 SOC_SINGLE("PCM Capture Mute", AIC26_REG_ADC_GAIN, 15, 1, 1), 253 SOC_SINGLE("Keyclick activate", AIC26_REG_AUDIO_CTRL2, 15, 0x1, 0), 254 SOC_SINGLE("Keyclick amplitude", AIC26_REG_AUDIO_CTRL2, 12, 0x7, 0), 255 SOC_SINGLE("Keyclick frequency", AIC26_REG_AUDIO_CTRL2, 8, 0x7, 0), 256 SOC_SINGLE("Keyclick period", AIC26_REG_AUDIO_CTRL2, 4, 0xf, 0), 257 SOC_ENUM("Capture Source", aic26_capture_src_enum), 258 }; 259 260 /* --------------------------------------------------------------------- 261 * SPI device portion of driver: sysfs files for debugging 262 */ 263 264 static ssize_t aic26_keyclick_show(struct device *dev, 265 struct device_attribute *attr, char *buf) 266 { 267 struct aic26 *aic26 = dev_get_drvdata(dev); 268 int val, amp, freq, len; 269 270 val = snd_soc_component_read(aic26->component, AIC26_REG_AUDIO_CTRL2); 271 amp = (val >> 12) & 0x7; 272 freq = (125 << ((val >> 8) & 0x7)) >> 1; 273 len = 2 * (1 + ((val >> 4) & 0xf)); 274 275 return sprintf(buf, "amp=%x freq=%iHz len=%iclks\n", amp, freq, len); 276 } 277 278 /* Any write to the keyclick attribute will trigger the keyclick event */ 279 static ssize_t aic26_keyclick_set(struct device *dev, 280 struct device_attribute *attr, 281 const char *buf, size_t count) 282 { 283 struct aic26 *aic26 = dev_get_drvdata(dev); 284 285 snd_soc_component_update_bits(aic26->component, AIC26_REG_AUDIO_CTRL2, 286 0x8000, 0x800); 287 288 return count; 289 } 290 291 static DEVICE_ATTR(keyclick, 0644, aic26_keyclick_show, aic26_keyclick_set); 292 293 /* --------------------------------------------------------------------- 294 * SoC CODEC portion of driver: probe and release routines 295 */ 296 static int aic26_probe(struct snd_soc_component *component) 297 { 298 struct aic26 *aic26 = dev_get_drvdata(component->dev); 299 int ret, reg; 300 301 aic26->component = component; 302 303 /* Reset the codec to power on defaults */ 304 snd_soc_component_write(component, AIC26_REG_RESET, 0xBB00); 305 306 /* Power up CODEC */ 307 snd_soc_component_write(component, AIC26_REG_POWER_CTRL, 0); 308 309 /* Audio Control 3 (master mode, fsref rate) */ 310 reg = snd_soc_component_read(component, AIC26_REG_AUDIO_CTRL3); 311 reg &= ~0xf800; 312 reg |= 0x0800; /* set master mode */ 313 snd_soc_component_write(component, AIC26_REG_AUDIO_CTRL3, reg); 314 315 /* Register the sysfs files for debugging */ 316 /* Create SysFS files */ 317 ret = device_create_file(component->dev, &dev_attr_keyclick); 318 if (ret) 319 dev_info(component->dev, "error creating sysfs files\n"); 320 321 return 0; 322 } 323 324 static const struct snd_soc_component_driver aic26_soc_component_dev = { 325 .probe = aic26_probe, 326 .controls = aic26_snd_controls, 327 .num_controls = ARRAY_SIZE(aic26_snd_controls), 328 .dapm_widgets = tlv320aic26_dapm_widgets, 329 .num_dapm_widgets = ARRAY_SIZE(tlv320aic26_dapm_widgets), 330 .dapm_routes = tlv320aic26_dapm_routes, 331 .num_dapm_routes = ARRAY_SIZE(tlv320aic26_dapm_routes), 332 .idle_bias_on = 1, 333 .use_pmdown_time = 1, 334 .endianness = 1, 335 .non_legacy_dai_naming = 1, 336 }; 337 338 static const struct regmap_config aic26_regmap = { 339 .reg_bits = 16, 340 .val_bits = 16, 341 }; 342 343 /* --------------------------------------------------------------------- 344 * SPI device portion of driver: probe and release routines and SPI 345 * driver registration. 346 */ 347 static int aic26_spi_probe(struct spi_device *spi) 348 { 349 struct aic26 *aic26; 350 int ret; 351 352 dev_dbg(&spi->dev, "probing tlv320aic26 spi device\n"); 353 354 /* Allocate driver data */ 355 aic26 = devm_kzalloc(&spi->dev, sizeof *aic26, GFP_KERNEL); 356 if (!aic26) 357 return -ENOMEM; 358 359 aic26->regmap = devm_regmap_init_spi(spi, &aic26_regmap); 360 if (IS_ERR(aic26->regmap)) 361 return PTR_ERR(aic26->regmap); 362 363 /* Initialize the driver data */ 364 aic26->spi = spi; 365 dev_set_drvdata(&spi->dev, aic26); 366 aic26->master = 1; 367 368 ret = devm_snd_soc_register_component(&spi->dev, 369 &aic26_soc_component_dev, &aic26_dai, 1); 370 return ret; 371 } 372 373 static struct spi_driver aic26_spi = { 374 .driver = { 375 .name = "tlv320aic26-codec", 376 }, 377 .probe = aic26_spi_probe, 378 }; 379 380 module_spi_driver(aic26_spi); 381