xref: /openbmc/linux/sound/soc/codecs/tas5086.c (revision cbdf59ad)
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  * TAS5086 ASoC codec driver
4  *
5  * Copyright (c) 2013 Daniel Mack <zonque@gmail.com>
6  *
7  * TODO:
8  *  - implement DAPM and input muxing
9  *  - implement modulation limit
10  *  - implement non-default PWM start
11  *
12  * Note that this chip has a very unusual register layout, specifically
13  * because the registers are of unequal size, and multi-byte registers
14  * require bulk writes to take effect. Regmap does not support that kind
15  * of devices.
16  *
17  * Currently, the driver does not touch any of the registers >= 0x20, so
18  * it doesn't matter because the entire map can be accessed as 8-bit
19  * array. In case more features will be added in the future
20  * that require access to higher registers, the entire regmap H/W I/O
21  * routines have to be open-coded.
22  */
23 
24 #include <linux/module.h>
25 #include <linux/slab.h>
26 #include <linux/delay.h>
27 #include <linux/gpio.h>
28 #include <linux/i2c.h>
29 #include <linux/regmap.h>
30 #include <linux/regulator/consumer.h>
31 #include <linux/spi/spi.h>
32 #include <linux/of.h>
33 #include <linux/of_device.h>
34 #include <linux/of_gpio.h>
35 #include <sound/pcm.h>
36 #include <sound/pcm_params.h>
37 #include <sound/soc.h>
38 #include <sound/tlv.h>
39 #include <sound/tas5086.h>
40 
41 #define TAS5086_PCM_FORMATS (SNDRV_PCM_FMTBIT_S16_LE  |		\
42 			     SNDRV_PCM_FMTBIT_S20_3LE |		\
43 			     SNDRV_PCM_FMTBIT_S24_3LE)
44 
45 #define TAS5086_PCM_RATES   (SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100  | \
46 			     SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_88200  | \
47 			     SNDRV_PCM_RATE_96000 | SNDRV_PCM_RATE_176400 | \
48 			     SNDRV_PCM_RATE_192000)
49 
50 /*
51  * TAS5086 registers
52  */
53 #define TAS5086_CLOCK_CONTROL		0x00	/* Clock control register  */
54 #define TAS5086_CLOCK_RATE(val)		(val << 5)
55 #define TAS5086_CLOCK_RATE_MASK		(0x7 << 5)
56 #define TAS5086_CLOCK_RATIO(val)	(val << 2)
57 #define TAS5086_CLOCK_RATIO_MASK	(0x7 << 2)
58 #define TAS5086_CLOCK_SCLK_RATIO_48	(1 << 1)
59 #define TAS5086_CLOCK_VALID		(1 << 0)
60 
61 #define TAS5086_DEEMPH_MASK		0x03
62 #define TAS5086_SOFT_MUTE_ALL		0x3f
63 
64 #define TAS5086_DEV_ID			0x01	/* Device ID register */
65 #define TAS5086_ERROR_STATUS		0x02	/* Error status register */
66 #define TAS5086_SYS_CONTROL_1		0x03	/* System control register 1 */
67 #define TAS5086_SERIAL_DATA_IF		0x04	/* Serial data interface register  */
68 #define TAS5086_SYS_CONTROL_2		0x05	/* System control register 2 */
69 #define TAS5086_SOFT_MUTE		0x06	/* Soft mute register */
70 #define TAS5086_MASTER_VOL		0x07	/* Master volume  */
71 #define TAS5086_CHANNEL_VOL(X)		(0x08 + (X))	/* Channel 1-6 volume */
72 #define TAS5086_VOLUME_CONTROL		0x09	/* Volume control register */
73 #define TAS5086_MOD_LIMIT		0x10	/* Modulation limit register */
74 #define TAS5086_PWM_START		0x18	/* PWM start register */
75 #define TAS5086_SURROUND		0x19	/* Surround register */
76 #define TAS5086_SPLIT_CAP_CHARGE	0x1a	/* Split cap charge period register */
77 #define TAS5086_OSC_TRIM		0x1b	/* Oscillator trim register */
78 #define TAS5086_BKNDERR 		0x1c
79 #define TAS5086_INPUT_MUX		0x20
80 #define TAS5086_PWM_OUTPUT_MUX		0x25
81 
82 #define TAS5086_MAX_REGISTER		TAS5086_PWM_OUTPUT_MUX
83 
84 #define TAS5086_PWM_START_MIDZ_FOR_START_1	(1 << 7)
85 #define TAS5086_PWM_START_MIDZ_FOR_START_2	(1 << 6)
86 #define TAS5086_PWM_START_CHANNEL_MASK		(0x3f)
87 
88 /*
89  * Default TAS5086 power-up configuration
90  */
91 static const struct reg_default tas5086_reg_defaults[] = {
92 	{ 0x00,	0x6c },
93 	{ 0x01,	0x03 },
94 	{ 0x02,	0x00 },
95 	{ 0x03,	0xa0 },
96 	{ 0x04,	0x05 },
97 	{ 0x05,	0x60 },
98 	{ 0x06,	0x00 },
99 	{ 0x07,	0xff },
100 	{ 0x08,	0x30 },
101 	{ 0x09,	0x30 },
102 	{ 0x0a,	0x30 },
103 	{ 0x0b,	0x30 },
104 	{ 0x0c,	0x30 },
105 	{ 0x0d,	0x30 },
106 	{ 0x0e,	0xb1 },
107 	{ 0x0f,	0x00 },
108 	{ 0x10,	0x02 },
109 	{ 0x11,	0x00 },
110 	{ 0x12,	0x00 },
111 	{ 0x13,	0x00 },
112 	{ 0x14,	0x00 },
113 	{ 0x15,	0x00 },
114 	{ 0x16,	0x00 },
115 	{ 0x17,	0x00 },
116 	{ 0x18,	0x3f },
117 	{ 0x19,	0x00 },
118 	{ 0x1a,	0x18 },
119 	{ 0x1b,	0x82 },
120 	{ 0x1c,	0x05 },
121 };
122 
123 static int tas5086_register_size(struct device *dev, unsigned int reg)
124 {
125 	switch (reg) {
126 	case TAS5086_CLOCK_CONTROL ... TAS5086_BKNDERR:
127 		return 1;
128 	case TAS5086_INPUT_MUX:
129 	case TAS5086_PWM_OUTPUT_MUX:
130 		return 4;
131 	}
132 
133 	dev_err(dev, "Unsupported register address: %d\n", reg);
134 	return 0;
135 }
136 
137 static bool tas5086_accessible_reg(struct device *dev, unsigned int reg)
138 {
139 	switch (reg) {
140 	case 0x0f:
141 	case 0x11 ... 0x17:
142 	case 0x1d ... 0x1f:
143 		return false;
144 	default:
145 		return true;
146 	}
147 }
148 
149 static bool tas5086_volatile_reg(struct device *dev, unsigned int reg)
150 {
151 	switch (reg) {
152 	case TAS5086_DEV_ID:
153 	case TAS5086_ERROR_STATUS:
154 		return true;
155 	}
156 
157 	return false;
158 }
159 
160 static bool tas5086_writeable_reg(struct device *dev, unsigned int reg)
161 {
162 	return tas5086_accessible_reg(dev, reg) && (reg != TAS5086_DEV_ID);
163 }
164 
165 static int tas5086_reg_write(void *context, unsigned int reg,
166 			      unsigned int value)
167 {
168 	struct i2c_client *client = context;
169 	unsigned int i, size;
170 	uint8_t buf[5];
171 	int ret;
172 
173 	size = tas5086_register_size(&client->dev, reg);
174 	if (size == 0)
175 		return -EINVAL;
176 
177 	buf[0] = reg;
178 
179 	for (i = size; i >= 1; --i) {
180 		buf[i] = value;
181 		value >>= 8;
182 	}
183 
184 	ret = i2c_master_send(client, buf, size + 1);
185 	if (ret == size + 1)
186 		return 0;
187 	else if (ret < 0)
188 		return ret;
189 	else
190 		return -EIO;
191 }
192 
193 static int tas5086_reg_read(void *context, unsigned int reg,
194 			     unsigned int *value)
195 {
196 	struct i2c_client *client = context;
197 	uint8_t send_buf, recv_buf[4];
198 	struct i2c_msg msgs[2];
199 	unsigned int size;
200 	unsigned int i;
201 	int ret;
202 
203 	size = tas5086_register_size(&client->dev, reg);
204 	if (size == 0)
205 		return -EINVAL;
206 
207 	send_buf = reg;
208 
209 	msgs[0].addr = client->addr;
210 	msgs[0].len = sizeof(send_buf);
211 	msgs[0].buf = &send_buf;
212 	msgs[0].flags = 0;
213 
214 	msgs[1].addr = client->addr;
215 	msgs[1].len = size;
216 	msgs[1].buf = recv_buf;
217 	msgs[1].flags = I2C_M_RD;
218 
219 	ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
220 	if (ret < 0)
221 		return ret;
222 	else if (ret != ARRAY_SIZE(msgs))
223 		return -EIO;
224 
225 	*value = 0;
226 
227 	for (i = 0; i < size; i++) {
228 		*value <<= 8;
229 		*value |= recv_buf[i];
230 	}
231 
232 	return 0;
233 }
234 
235 static const char * const supply_names[] = {
236 	"dvdd", "avdd"
237 };
238 
239 struct tas5086_private {
240 	struct regmap	*regmap;
241 	unsigned int	mclk, sclk;
242 	unsigned int	format;
243 	bool		deemph;
244 	unsigned int	charge_period;
245 	unsigned int	pwm_start_mid_z;
246 	/* Current sample rate for de-emphasis control */
247 	int		rate;
248 	/* GPIO driving Reset pin, if any */
249 	int		gpio_nreset;
250 	struct		regulator_bulk_data supplies[ARRAY_SIZE(supply_names)];
251 };
252 
253 static int tas5086_deemph[] = { 0, 32000, 44100, 48000 };
254 
255 static int tas5086_set_deemph(struct snd_soc_component *component)
256 {
257 	struct tas5086_private *priv = snd_soc_component_get_drvdata(component);
258 	int i, val = 0;
259 
260 	if (priv->deemph) {
261 		for (i = 0; i < ARRAY_SIZE(tas5086_deemph); i++) {
262 			if (tas5086_deemph[i] == priv->rate) {
263 				val = i;
264 				break;
265 			}
266 		}
267 	}
268 
269 	return regmap_update_bits(priv->regmap, TAS5086_SYS_CONTROL_1,
270 				  TAS5086_DEEMPH_MASK, val);
271 }
272 
273 static int tas5086_get_deemph(struct snd_kcontrol *kcontrol,
274 			      struct snd_ctl_elem_value *ucontrol)
275 {
276 	struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol);
277 	struct tas5086_private *priv = snd_soc_component_get_drvdata(component);
278 
279 	ucontrol->value.integer.value[0] = priv->deemph;
280 
281 	return 0;
282 }
283 
284 static int tas5086_put_deemph(struct snd_kcontrol *kcontrol,
285 			      struct snd_ctl_elem_value *ucontrol)
286 {
287 	struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol);
288 	struct tas5086_private *priv = snd_soc_component_get_drvdata(component);
289 
290 	priv->deemph = ucontrol->value.integer.value[0];
291 
292 	return tas5086_set_deemph(component);
293 }
294 
295 
296 static int tas5086_set_dai_sysclk(struct snd_soc_dai *codec_dai,
297 				  int clk_id, unsigned int freq, int dir)
298 {
299 	struct snd_soc_component *component = codec_dai->component;
300 	struct tas5086_private *priv = snd_soc_component_get_drvdata(component);
301 
302 	switch (clk_id) {
303 	case TAS5086_CLK_IDX_MCLK:
304 		priv->mclk = freq;
305 		break;
306 	case TAS5086_CLK_IDX_SCLK:
307 		priv->sclk = freq;
308 		break;
309 	}
310 
311 	return 0;
312 }
313 
314 static int tas5086_set_dai_fmt(struct snd_soc_dai *codec_dai,
315 			       unsigned int format)
316 {
317 	struct snd_soc_component *component = codec_dai->component;
318 	struct tas5086_private *priv = snd_soc_component_get_drvdata(component);
319 
320 	/* The TAS5086 can only be slave to all clocks */
321 	if ((format & SND_SOC_DAIFMT_MASTER_MASK) != SND_SOC_DAIFMT_CBS_CFS) {
322 		dev_err(component->dev, "Invalid clocking mode\n");
323 		return -EINVAL;
324 	}
325 
326 	/* we need to refer to the data format from hw_params() */
327 	priv->format = format;
328 
329 	return 0;
330 }
331 
332 static const int tas5086_sample_rates[] = {
333 	32000, 38000, 44100, 48000, 88200, 96000, 176400, 192000
334 };
335 
336 static const int tas5086_ratios[] = {
337 	64, 128, 192, 256, 384, 512
338 };
339 
340 static int index_in_array(const int *array, int len, int needle)
341 {
342 	int i;
343 
344 	for (i = 0; i < len; i++)
345 		if (array[i] == needle)
346 			return i;
347 
348 	return -ENOENT;
349 }
350 
351 static int tas5086_hw_params(struct snd_pcm_substream *substream,
352 			     struct snd_pcm_hw_params *params,
353 			     struct snd_soc_dai *dai)
354 {
355 	struct snd_soc_component *component = dai->component;
356 	struct tas5086_private *priv = snd_soc_component_get_drvdata(component);
357 	int val;
358 	int ret;
359 
360 	priv->rate = params_rate(params);
361 
362 	/* Look up the sample rate and refer to the offset in the list */
363 	val = index_in_array(tas5086_sample_rates,
364 			     ARRAY_SIZE(tas5086_sample_rates), priv->rate);
365 
366 	if (val < 0) {
367 		dev_err(component->dev, "Invalid sample rate\n");
368 		return -EINVAL;
369 	}
370 
371 	ret = regmap_update_bits(priv->regmap, TAS5086_CLOCK_CONTROL,
372 				 TAS5086_CLOCK_RATE_MASK,
373 				 TAS5086_CLOCK_RATE(val));
374 	if (ret < 0)
375 		return ret;
376 
377 	/* MCLK / Fs ratio */
378 	val = index_in_array(tas5086_ratios, ARRAY_SIZE(tas5086_ratios),
379 			     priv->mclk / priv->rate);
380 	if (val < 0) {
381 		dev_err(component->dev, "Invalid MCLK / Fs ratio\n");
382 		return -EINVAL;
383 	}
384 
385 	ret = regmap_update_bits(priv->regmap, TAS5086_CLOCK_CONTROL,
386 				 TAS5086_CLOCK_RATIO_MASK,
387 				 TAS5086_CLOCK_RATIO(val));
388 	if (ret < 0)
389 		return ret;
390 
391 
392 	ret = regmap_update_bits(priv->regmap, TAS5086_CLOCK_CONTROL,
393 				 TAS5086_CLOCK_SCLK_RATIO_48,
394 				 (priv->sclk == 48 * priv->rate) ?
395 					TAS5086_CLOCK_SCLK_RATIO_48 : 0);
396 	if (ret < 0)
397 		return ret;
398 
399 	/*
400 	 * The chip has a very unituitive register mapping and muxes information
401 	 * about data format and sample depth into the same register, but not on
402 	 * a logical bit-boundary. Hence, we have to refer to the format passed
403 	 * in the set_dai_fmt() callback and set up everything from here.
404 	 *
405 	 * First, determine the 'base' value, using the format ...
406 	 */
407 	switch (priv->format & SND_SOC_DAIFMT_FORMAT_MASK) {
408 	case SND_SOC_DAIFMT_RIGHT_J:
409 		val = 0x00;
410 		break;
411 	case SND_SOC_DAIFMT_I2S:
412 		val = 0x03;
413 		break;
414 	case SND_SOC_DAIFMT_LEFT_J:
415 		val = 0x06;
416 		break;
417 	default:
418 		dev_err(component->dev, "Invalid DAI format\n");
419 		return -EINVAL;
420 	}
421 
422 	/* ... then add the offset for the sample bit depth. */
423 	switch (params_width(params)) {
424         case 16:
425 		val += 0;
426                 break;
427 	case 20:
428 		val += 1;
429 		break;
430 	case 24:
431 		val += 2;
432 		break;
433 	default:
434 		dev_err(component->dev, "Invalid bit width\n");
435 		return -EINVAL;
436 	}
437 
438 	ret = regmap_write(priv->regmap, TAS5086_SERIAL_DATA_IF, val);
439 	if (ret < 0)
440 		return ret;
441 
442 	/* clock is considered valid now */
443 	ret = regmap_update_bits(priv->regmap, TAS5086_CLOCK_CONTROL,
444 				 TAS5086_CLOCK_VALID, TAS5086_CLOCK_VALID);
445 	if (ret < 0)
446 		return ret;
447 
448 	return tas5086_set_deemph(component);
449 }
450 
451 static int tas5086_mute_stream(struct snd_soc_dai *dai, int mute, int stream)
452 {
453 	struct snd_soc_component *component = dai->component;
454 	struct tas5086_private *priv = snd_soc_component_get_drvdata(component);
455 	unsigned int val = 0;
456 
457 	if (mute)
458 		val = TAS5086_SOFT_MUTE_ALL;
459 
460 	return regmap_write(priv->regmap, TAS5086_SOFT_MUTE, val);
461 }
462 
463 static void tas5086_reset(struct tas5086_private *priv)
464 {
465 	if (gpio_is_valid(priv->gpio_nreset)) {
466 		/* Reset codec - minimum assertion time is 400ns */
467 		gpio_direction_output(priv->gpio_nreset, 0);
468 		udelay(1);
469 		gpio_set_value(priv->gpio_nreset, 1);
470 
471 		/* Codec needs ~15ms to wake up */
472 		msleep(15);
473 	}
474 }
475 
476 /* charge period values in microseconds */
477 static const int tas5086_charge_period[] = {
478 	  13000,  16900,   23400,   31200,   41600,   54600,   72800,   96200,
479 	 130000, 156000,  234000,  312000,  416000,  546000,  728000,  962000,
480 	1300000, 169000, 2340000, 3120000, 4160000, 5460000, 7280000, 9620000,
481 };
482 
483 static int tas5086_init(struct device *dev, struct tas5086_private *priv)
484 {
485 	int ret, i;
486 
487 	/*
488 	 * If any of the channels is configured to start in Mid-Z mode,
489 	 * configure 'part 1' of the PWM starts to use Mid-Z, and tell
490 	 * all configured mid-z channels to start start under 'part 1'.
491 	 */
492 	if (priv->pwm_start_mid_z)
493 		regmap_write(priv->regmap, TAS5086_PWM_START,
494 			     TAS5086_PWM_START_MIDZ_FOR_START_1 |
495 				priv->pwm_start_mid_z);
496 
497 	/* lookup and set split-capacitor charge period */
498 	if (priv->charge_period == 0) {
499 		regmap_write(priv->regmap, TAS5086_SPLIT_CAP_CHARGE, 0);
500 	} else {
501 		i = index_in_array(tas5086_charge_period,
502 				   ARRAY_SIZE(tas5086_charge_period),
503 				   priv->charge_period);
504 		if (i >= 0)
505 			regmap_write(priv->regmap, TAS5086_SPLIT_CAP_CHARGE,
506 				     i + 0x08);
507 		else
508 			dev_warn(dev,
509 				 "Invalid split-cap charge period of %d ns.\n",
510 				 priv->charge_period);
511 	}
512 
513 	/* enable factory trim */
514 	ret = regmap_write(priv->regmap, TAS5086_OSC_TRIM, 0x00);
515 	if (ret < 0)
516 		return ret;
517 
518 	/* start all channels */
519 	ret = regmap_write(priv->regmap, TAS5086_SYS_CONTROL_2, 0x20);
520 	if (ret < 0)
521 		return ret;
522 
523 	/* mute all channels for now */
524 	ret = regmap_write(priv->regmap, TAS5086_SOFT_MUTE,
525 			   TAS5086_SOFT_MUTE_ALL);
526 	if (ret < 0)
527 		return ret;
528 
529 	return 0;
530 }
531 
532 /* TAS5086 controls */
533 static const DECLARE_TLV_DB_SCALE(tas5086_dac_tlv, -10350, 50, 1);
534 
535 static const struct snd_kcontrol_new tas5086_controls[] = {
536 	SOC_SINGLE_TLV("Master Playback Volume", TAS5086_MASTER_VOL,
537 		       0, 0xff, 1, tas5086_dac_tlv),
538 	SOC_DOUBLE_R_TLV("Channel 1/2 Playback Volume",
539 			 TAS5086_CHANNEL_VOL(0), TAS5086_CHANNEL_VOL(1),
540 			 0, 0xff, 1, tas5086_dac_tlv),
541 	SOC_DOUBLE_R_TLV("Channel 3/4 Playback Volume",
542 			 TAS5086_CHANNEL_VOL(2), TAS5086_CHANNEL_VOL(3),
543 			 0, 0xff, 1, tas5086_dac_tlv),
544 	SOC_DOUBLE_R_TLV("Channel 5/6 Playback Volume",
545 			 TAS5086_CHANNEL_VOL(4), TAS5086_CHANNEL_VOL(5),
546 			 0, 0xff, 1, tas5086_dac_tlv),
547 	SOC_SINGLE_BOOL_EXT("De-emphasis Switch", 0,
548 			    tas5086_get_deemph, tas5086_put_deemph),
549 };
550 
551 /* Input mux controls */
552 static const char *tas5086_dapm_sdin_texts[] =
553 {
554 	"SDIN1-L", "SDIN1-R", "SDIN2-L", "SDIN2-R",
555 	"SDIN3-L", "SDIN3-R", "Ground (0)", "nc"
556 };
557 
558 static const struct soc_enum tas5086_dapm_input_mux_enum[] = {
559 	SOC_ENUM_SINGLE(TAS5086_INPUT_MUX, 20, 8, tas5086_dapm_sdin_texts),
560 	SOC_ENUM_SINGLE(TAS5086_INPUT_MUX, 16, 8, tas5086_dapm_sdin_texts),
561 	SOC_ENUM_SINGLE(TAS5086_INPUT_MUX, 12, 8, tas5086_dapm_sdin_texts),
562 	SOC_ENUM_SINGLE(TAS5086_INPUT_MUX, 8,  8, tas5086_dapm_sdin_texts),
563 	SOC_ENUM_SINGLE(TAS5086_INPUT_MUX, 4,  8, tas5086_dapm_sdin_texts),
564 	SOC_ENUM_SINGLE(TAS5086_INPUT_MUX, 0,  8, tas5086_dapm_sdin_texts),
565 };
566 
567 static const struct snd_kcontrol_new tas5086_dapm_input_mux_controls[] = {
568 	SOC_DAPM_ENUM("Channel 1 input", tas5086_dapm_input_mux_enum[0]),
569 	SOC_DAPM_ENUM("Channel 2 input", tas5086_dapm_input_mux_enum[1]),
570 	SOC_DAPM_ENUM("Channel 3 input", tas5086_dapm_input_mux_enum[2]),
571 	SOC_DAPM_ENUM("Channel 4 input", tas5086_dapm_input_mux_enum[3]),
572 	SOC_DAPM_ENUM("Channel 5 input", tas5086_dapm_input_mux_enum[4]),
573 	SOC_DAPM_ENUM("Channel 6 input", tas5086_dapm_input_mux_enum[5]),
574 };
575 
576 /* Output mux controls */
577 static const char *tas5086_dapm_channel_texts[] =
578 	{ "Channel 1 Mux", "Channel 2 Mux", "Channel 3 Mux",
579 	  "Channel 4 Mux", "Channel 5 Mux", "Channel 6 Mux" };
580 
581 static const struct soc_enum tas5086_dapm_output_mux_enum[] = {
582 	SOC_ENUM_SINGLE(TAS5086_PWM_OUTPUT_MUX, 20, 6, tas5086_dapm_channel_texts),
583 	SOC_ENUM_SINGLE(TAS5086_PWM_OUTPUT_MUX, 16, 6, tas5086_dapm_channel_texts),
584 	SOC_ENUM_SINGLE(TAS5086_PWM_OUTPUT_MUX, 12, 6, tas5086_dapm_channel_texts),
585 	SOC_ENUM_SINGLE(TAS5086_PWM_OUTPUT_MUX, 8,  6, tas5086_dapm_channel_texts),
586 	SOC_ENUM_SINGLE(TAS5086_PWM_OUTPUT_MUX, 4,  6, tas5086_dapm_channel_texts),
587 	SOC_ENUM_SINGLE(TAS5086_PWM_OUTPUT_MUX, 0,  6, tas5086_dapm_channel_texts),
588 };
589 
590 static const struct snd_kcontrol_new tas5086_dapm_output_mux_controls[] = {
591 	SOC_DAPM_ENUM("PWM1 Output", tas5086_dapm_output_mux_enum[0]),
592 	SOC_DAPM_ENUM("PWM2 Output", tas5086_dapm_output_mux_enum[1]),
593 	SOC_DAPM_ENUM("PWM3 Output", tas5086_dapm_output_mux_enum[2]),
594 	SOC_DAPM_ENUM("PWM4 Output", tas5086_dapm_output_mux_enum[3]),
595 	SOC_DAPM_ENUM("PWM5 Output", tas5086_dapm_output_mux_enum[4]),
596 	SOC_DAPM_ENUM("PWM6 Output", tas5086_dapm_output_mux_enum[5]),
597 };
598 
599 static const struct snd_soc_dapm_widget tas5086_dapm_widgets[] = {
600 	SND_SOC_DAPM_INPUT("SDIN1-L"),
601 	SND_SOC_DAPM_INPUT("SDIN1-R"),
602 	SND_SOC_DAPM_INPUT("SDIN2-L"),
603 	SND_SOC_DAPM_INPUT("SDIN2-R"),
604 	SND_SOC_DAPM_INPUT("SDIN3-L"),
605 	SND_SOC_DAPM_INPUT("SDIN3-R"),
606 	SND_SOC_DAPM_INPUT("SDIN4-L"),
607 	SND_SOC_DAPM_INPUT("SDIN4-R"),
608 
609 	SND_SOC_DAPM_OUTPUT("PWM1"),
610 	SND_SOC_DAPM_OUTPUT("PWM2"),
611 	SND_SOC_DAPM_OUTPUT("PWM3"),
612 	SND_SOC_DAPM_OUTPUT("PWM4"),
613 	SND_SOC_DAPM_OUTPUT("PWM5"),
614 	SND_SOC_DAPM_OUTPUT("PWM6"),
615 
616 	SND_SOC_DAPM_MUX("Channel 1 Mux", SND_SOC_NOPM, 0, 0,
617 			 &tas5086_dapm_input_mux_controls[0]),
618 	SND_SOC_DAPM_MUX("Channel 2 Mux", SND_SOC_NOPM, 0, 0,
619 			 &tas5086_dapm_input_mux_controls[1]),
620 	SND_SOC_DAPM_MUX("Channel 3 Mux", SND_SOC_NOPM, 0, 0,
621 			 &tas5086_dapm_input_mux_controls[2]),
622 	SND_SOC_DAPM_MUX("Channel 4 Mux", SND_SOC_NOPM, 0, 0,
623 			 &tas5086_dapm_input_mux_controls[3]),
624 	SND_SOC_DAPM_MUX("Channel 5 Mux", SND_SOC_NOPM, 0, 0,
625 			 &tas5086_dapm_input_mux_controls[4]),
626 	SND_SOC_DAPM_MUX("Channel 6 Mux", SND_SOC_NOPM, 0, 0,
627 			 &tas5086_dapm_input_mux_controls[5]),
628 
629 	SND_SOC_DAPM_MUX("PWM1 Mux", SND_SOC_NOPM, 0, 0,
630 			 &tas5086_dapm_output_mux_controls[0]),
631 	SND_SOC_DAPM_MUX("PWM2 Mux", SND_SOC_NOPM, 0, 0,
632 			 &tas5086_dapm_output_mux_controls[1]),
633 	SND_SOC_DAPM_MUX("PWM3 Mux", SND_SOC_NOPM, 0, 0,
634 			 &tas5086_dapm_output_mux_controls[2]),
635 	SND_SOC_DAPM_MUX("PWM4 Mux", SND_SOC_NOPM, 0, 0,
636 			 &tas5086_dapm_output_mux_controls[3]),
637 	SND_SOC_DAPM_MUX("PWM5 Mux", SND_SOC_NOPM, 0, 0,
638 			 &tas5086_dapm_output_mux_controls[4]),
639 	SND_SOC_DAPM_MUX("PWM6 Mux", SND_SOC_NOPM, 0, 0,
640 			 &tas5086_dapm_output_mux_controls[5]),
641 };
642 
643 static const struct snd_soc_dapm_route tas5086_dapm_routes[] = {
644 	/* SDIN inputs -> channel muxes */
645 	{ "Channel 1 Mux", "SDIN1-L", "SDIN1-L" },
646 	{ "Channel 1 Mux", "SDIN1-R", "SDIN1-R" },
647 	{ "Channel 1 Mux", "SDIN2-L", "SDIN2-L" },
648 	{ "Channel 1 Mux", "SDIN2-R", "SDIN2-R" },
649 	{ "Channel 1 Mux", "SDIN3-L", "SDIN3-L" },
650 	{ "Channel 1 Mux", "SDIN3-R", "SDIN3-R" },
651 
652 	{ "Channel 2 Mux", "SDIN1-L", "SDIN1-L" },
653 	{ "Channel 2 Mux", "SDIN1-R", "SDIN1-R" },
654 	{ "Channel 2 Mux", "SDIN2-L", "SDIN2-L" },
655 	{ "Channel 2 Mux", "SDIN2-R", "SDIN2-R" },
656 	{ "Channel 2 Mux", "SDIN3-L", "SDIN3-L" },
657 	{ "Channel 2 Mux", "SDIN3-R", "SDIN3-R" },
658 
659 	{ "Channel 2 Mux", "SDIN1-L", "SDIN1-L" },
660 	{ "Channel 2 Mux", "SDIN1-R", "SDIN1-R" },
661 	{ "Channel 2 Mux", "SDIN2-L", "SDIN2-L" },
662 	{ "Channel 2 Mux", "SDIN2-R", "SDIN2-R" },
663 	{ "Channel 2 Mux", "SDIN3-L", "SDIN3-L" },
664 	{ "Channel 2 Mux", "SDIN3-R", "SDIN3-R" },
665 
666 	{ "Channel 3 Mux", "SDIN1-L", "SDIN1-L" },
667 	{ "Channel 3 Mux", "SDIN1-R", "SDIN1-R" },
668 	{ "Channel 3 Mux", "SDIN2-L", "SDIN2-L" },
669 	{ "Channel 3 Mux", "SDIN2-R", "SDIN2-R" },
670 	{ "Channel 3 Mux", "SDIN3-L", "SDIN3-L" },
671 	{ "Channel 3 Mux", "SDIN3-R", "SDIN3-R" },
672 
673 	{ "Channel 4 Mux", "SDIN1-L", "SDIN1-L" },
674 	{ "Channel 4 Mux", "SDIN1-R", "SDIN1-R" },
675 	{ "Channel 4 Mux", "SDIN2-L", "SDIN2-L" },
676 	{ "Channel 4 Mux", "SDIN2-R", "SDIN2-R" },
677 	{ "Channel 4 Mux", "SDIN3-L", "SDIN3-L" },
678 	{ "Channel 4 Mux", "SDIN3-R", "SDIN3-R" },
679 
680 	{ "Channel 5 Mux", "SDIN1-L", "SDIN1-L" },
681 	{ "Channel 5 Mux", "SDIN1-R", "SDIN1-R" },
682 	{ "Channel 5 Mux", "SDIN2-L", "SDIN2-L" },
683 	{ "Channel 5 Mux", "SDIN2-R", "SDIN2-R" },
684 	{ "Channel 5 Mux", "SDIN3-L", "SDIN3-L" },
685 	{ "Channel 5 Mux", "SDIN3-R", "SDIN3-R" },
686 
687 	{ "Channel 6 Mux", "SDIN1-L", "SDIN1-L" },
688 	{ "Channel 6 Mux", "SDIN1-R", "SDIN1-R" },
689 	{ "Channel 6 Mux", "SDIN2-L", "SDIN2-L" },
690 	{ "Channel 6 Mux", "SDIN2-R", "SDIN2-R" },
691 	{ "Channel 6 Mux", "SDIN3-L", "SDIN3-L" },
692 	{ "Channel 6 Mux", "SDIN3-R", "SDIN3-R" },
693 
694 	/* Channel muxes -> PWM muxes */
695 	{ "PWM1 Mux", "Channel 1 Mux", "Channel 1 Mux" },
696 	{ "PWM2 Mux", "Channel 1 Mux", "Channel 1 Mux" },
697 	{ "PWM3 Mux", "Channel 1 Mux", "Channel 1 Mux" },
698 	{ "PWM4 Mux", "Channel 1 Mux", "Channel 1 Mux" },
699 	{ "PWM5 Mux", "Channel 1 Mux", "Channel 1 Mux" },
700 	{ "PWM6 Mux", "Channel 1 Mux", "Channel 1 Mux" },
701 
702 	{ "PWM1 Mux", "Channel 2 Mux", "Channel 2 Mux" },
703 	{ "PWM2 Mux", "Channel 2 Mux", "Channel 2 Mux" },
704 	{ "PWM3 Mux", "Channel 2 Mux", "Channel 2 Mux" },
705 	{ "PWM4 Mux", "Channel 2 Mux", "Channel 2 Mux" },
706 	{ "PWM5 Mux", "Channel 2 Mux", "Channel 2 Mux" },
707 	{ "PWM6 Mux", "Channel 2 Mux", "Channel 2 Mux" },
708 
709 	{ "PWM1 Mux", "Channel 3 Mux", "Channel 3 Mux" },
710 	{ "PWM2 Mux", "Channel 3 Mux", "Channel 3 Mux" },
711 	{ "PWM3 Mux", "Channel 3 Mux", "Channel 3 Mux" },
712 	{ "PWM4 Mux", "Channel 3 Mux", "Channel 3 Mux" },
713 	{ "PWM5 Mux", "Channel 3 Mux", "Channel 3 Mux" },
714 	{ "PWM6 Mux", "Channel 3 Mux", "Channel 3 Mux" },
715 
716 	{ "PWM1 Mux", "Channel 4 Mux", "Channel 4 Mux" },
717 	{ "PWM2 Mux", "Channel 4 Mux", "Channel 4 Mux" },
718 	{ "PWM3 Mux", "Channel 4 Mux", "Channel 4 Mux" },
719 	{ "PWM4 Mux", "Channel 4 Mux", "Channel 4 Mux" },
720 	{ "PWM5 Mux", "Channel 4 Mux", "Channel 4 Mux" },
721 	{ "PWM6 Mux", "Channel 4 Mux", "Channel 4 Mux" },
722 
723 	{ "PWM1 Mux", "Channel 5 Mux", "Channel 5 Mux" },
724 	{ "PWM2 Mux", "Channel 5 Mux", "Channel 5 Mux" },
725 	{ "PWM3 Mux", "Channel 5 Mux", "Channel 5 Mux" },
726 	{ "PWM4 Mux", "Channel 5 Mux", "Channel 5 Mux" },
727 	{ "PWM5 Mux", "Channel 5 Mux", "Channel 5 Mux" },
728 	{ "PWM6 Mux", "Channel 5 Mux", "Channel 5 Mux" },
729 
730 	{ "PWM1 Mux", "Channel 6 Mux", "Channel 6 Mux" },
731 	{ "PWM2 Mux", "Channel 6 Mux", "Channel 6 Mux" },
732 	{ "PWM3 Mux", "Channel 6 Mux", "Channel 6 Mux" },
733 	{ "PWM4 Mux", "Channel 6 Mux", "Channel 6 Mux" },
734 	{ "PWM5 Mux", "Channel 6 Mux", "Channel 6 Mux" },
735 	{ "PWM6 Mux", "Channel 6 Mux", "Channel 6 Mux" },
736 
737 	/* The PWM muxes are directly connected to the PWM outputs */
738 	{ "PWM1", NULL, "PWM1 Mux" },
739 	{ "PWM2", NULL, "PWM2 Mux" },
740 	{ "PWM3", NULL, "PWM3 Mux" },
741 	{ "PWM4", NULL, "PWM4 Mux" },
742 	{ "PWM5", NULL, "PWM5 Mux" },
743 	{ "PWM6", NULL, "PWM6 Mux" },
744 
745 };
746 
747 static const struct snd_soc_dai_ops tas5086_dai_ops = {
748 	.hw_params	= tas5086_hw_params,
749 	.set_sysclk	= tas5086_set_dai_sysclk,
750 	.set_fmt	= tas5086_set_dai_fmt,
751 	.mute_stream	= tas5086_mute_stream,
752 };
753 
754 static struct snd_soc_dai_driver tas5086_dai = {
755 	.name = "tas5086-hifi",
756 	.playback = {
757 		.stream_name	= "Playback",
758 		.channels_min	= 2,
759 		.channels_max	= 6,
760 		.rates		= TAS5086_PCM_RATES,
761 		.formats	= TAS5086_PCM_FORMATS,
762 	},
763 	.ops = &tas5086_dai_ops,
764 };
765 
766 #ifdef CONFIG_PM
767 static int tas5086_soc_suspend(struct snd_soc_component *component)
768 {
769 	struct tas5086_private *priv = snd_soc_component_get_drvdata(component);
770 	int ret;
771 
772 	/* Shut down all channels */
773 	ret = regmap_write(priv->regmap, TAS5086_SYS_CONTROL_2, 0x60);
774 	if (ret < 0)
775 		return ret;
776 
777 	regulator_bulk_disable(ARRAY_SIZE(priv->supplies), priv->supplies);
778 
779 	return 0;
780 }
781 
782 static int tas5086_soc_resume(struct snd_soc_component *component)
783 {
784 	struct tas5086_private *priv = snd_soc_component_get_drvdata(component);
785 	int ret;
786 
787 	ret = regulator_bulk_enable(ARRAY_SIZE(priv->supplies), priv->supplies);
788 	if (ret < 0)
789 		return ret;
790 
791 	tas5086_reset(priv);
792 	regcache_mark_dirty(priv->regmap);
793 
794 	ret = tas5086_init(component->dev, priv);
795 	if (ret < 0)
796 		return ret;
797 
798 	ret = regcache_sync(priv->regmap);
799 	if (ret < 0)
800 		return ret;
801 
802 	return 0;
803 }
804 #else
805 #define tas5086_soc_suspend	NULL
806 #define tas5086_soc_resume	NULL
807 #endif /* CONFIG_PM */
808 
809 #ifdef CONFIG_OF
810 static const struct of_device_id tas5086_dt_ids[] = {
811 	{ .compatible = "ti,tas5086", },
812 	{ }
813 };
814 MODULE_DEVICE_TABLE(of, tas5086_dt_ids);
815 #endif
816 
817 static int tas5086_probe(struct snd_soc_component *component)
818 {
819 	struct tas5086_private *priv = snd_soc_component_get_drvdata(component);
820 	int i, ret;
821 
822 	ret = regulator_bulk_enable(ARRAY_SIZE(priv->supplies), priv->supplies);
823 	if (ret < 0) {
824 		dev_err(component->dev, "Failed to enable regulators: %d\n", ret);
825 		return ret;
826 	}
827 
828 	priv->pwm_start_mid_z = 0;
829 	priv->charge_period = 1300000; /* hardware default is 1300 ms */
830 
831 	if (of_match_device(of_match_ptr(tas5086_dt_ids), component->dev)) {
832 		struct device_node *of_node = component->dev->of_node;
833 
834 		of_property_read_u32(of_node, "ti,charge-period",
835 				     &priv->charge_period);
836 
837 		for (i = 0; i < 6; i++) {
838 			char name[25];
839 
840 			snprintf(name, sizeof(name),
841 				 "ti,mid-z-channel-%d", i + 1);
842 
843 			if (of_get_property(of_node, name, NULL) != NULL)
844 				priv->pwm_start_mid_z |= 1 << i;
845 		}
846 	}
847 
848 	tas5086_reset(priv);
849 	ret = tas5086_init(component->dev, priv);
850 	if (ret < 0)
851 		goto exit_disable_regulators;
852 
853 	/* set master volume to 0 dB */
854 	ret = regmap_write(priv->regmap, TAS5086_MASTER_VOL, 0x30);
855 	if (ret < 0)
856 		goto exit_disable_regulators;
857 
858 	return 0;
859 
860 exit_disable_regulators:
861 	regulator_bulk_disable(ARRAY_SIZE(priv->supplies), priv->supplies);
862 
863 	return ret;
864 }
865 
866 static void tas5086_remove(struct snd_soc_component *component)
867 {
868 	struct tas5086_private *priv = snd_soc_component_get_drvdata(component);
869 
870 	if (gpio_is_valid(priv->gpio_nreset))
871 		/* Set codec to the reset state */
872 		gpio_set_value(priv->gpio_nreset, 0);
873 
874 	regulator_bulk_disable(ARRAY_SIZE(priv->supplies), priv->supplies);
875 };
876 
877 static const struct snd_soc_component_driver soc_component_dev_tas5086 = {
878 	.probe			= tas5086_probe,
879 	.remove			= tas5086_remove,
880 	.suspend		= tas5086_soc_suspend,
881 	.resume			= tas5086_soc_resume,
882 	.controls		= tas5086_controls,
883 	.num_controls		= ARRAY_SIZE(tas5086_controls),
884 	.dapm_widgets		= tas5086_dapm_widgets,
885 	.num_dapm_widgets	= ARRAY_SIZE(tas5086_dapm_widgets),
886 	.dapm_routes		= tas5086_dapm_routes,
887 	.num_dapm_routes	= ARRAY_SIZE(tas5086_dapm_routes),
888 	.idle_bias_on		= 1,
889 	.use_pmdown_time	= 1,
890 	.endianness		= 1,
891 	.non_legacy_dai_naming	= 1,
892 };
893 
894 static const struct i2c_device_id tas5086_i2c_id[] = {
895 	{ "tas5086", 0 },
896 	{ }
897 };
898 MODULE_DEVICE_TABLE(i2c, tas5086_i2c_id);
899 
900 static const struct regmap_config tas5086_regmap = {
901 	.reg_bits		= 8,
902 	.val_bits		= 32,
903 	.max_register		= TAS5086_MAX_REGISTER,
904 	.reg_defaults		= tas5086_reg_defaults,
905 	.num_reg_defaults	= ARRAY_SIZE(tas5086_reg_defaults),
906 	.cache_type		= REGCACHE_RBTREE,
907 	.volatile_reg		= tas5086_volatile_reg,
908 	.writeable_reg		= tas5086_writeable_reg,
909 	.readable_reg		= tas5086_accessible_reg,
910 	.reg_read		= tas5086_reg_read,
911 	.reg_write		= tas5086_reg_write,
912 };
913 
914 static int tas5086_i2c_probe(struct i2c_client *i2c,
915 			     const struct i2c_device_id *id)
916 {
917 	struct tas5086_private *priv;
918 	struct device *dev = &i2c->dev;
919 	int gpio_nreset = -EINVAL;
920 	int i, ret;
921 
922 	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
923 	if (!priv)
924 		return -ENOMEM;
925 
926 	for (i = 0; i < ARRAY_SIZE(supply_names); i++)
927 		priv->supplies[i].supply = supply_names[i];
928 
929 	ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(priv->supplies),
930 				      priv->supplies);
931 	if (ret < 0) {
932 		dev_err(dev, "Failed to get regulators: %d\n", ret);
933 		return ret;
934 	}
935 
936 	priv->regmap = devm_regmap_init(dev, NULL, i2c, &tas5086_regmap);
937 	if (IS_ERR(priv->regmap)) {
938 		ret = PTR_ERR(priv->regmap);
939 		dev_err(&i2c->dev, "Failed to create regmap: %d\n", ret);
940 		return ret;
941 	}
942 
943 	i2c_set_clientdata(i2c, priv);
944 
945 	if (of_match_device(of_match_ptr(tas5086_dt_ids), dev)) {
946 		struct device_node *of_node = dev->of_node;
947 		gpio_nreset = of_get_named_gpio(of_node, "reset-gpio", 0);
948 	}
949 
950 	if (gpio_is_valid(gpio_nreset))
951 		if (devm_gpio_request(dev, gpio_nreset, "TAS5086 Reset"))
952 			gpio_nreset = -EINVAL;
953 
954 	priv->gpio_nreset = gpio_nreset;
955 
956 	ret = regulator_bulk_enable(ARRAY_SIZE(priv->supplies), priv->supplies);
957 	if (ret < 0) {
958 		dev_err(dev, "Failed to enable regulators: %d\n", ret);
959 		return ret;
960 	}
961 
962 	tas5086_reset(priv);
963 
964 	/* The TAS5086 always returns 0x03 in its TAS5086_DEV_ID register */
965 	ret = regmap_read(priv->regmap, TAS5086_DEV_ID, &i);
966 	if (ret == 0 && i != 0x3) {
967 		dev_err(dev,
968 			"Failed to identify TAS5086 codec (got %02x)\n", i);
969 		ret = -ENODEV;
970 	}
971 
972 	/*
973 	 * The chip has been identified, so we can turn off the power
974 	 * again until the dai link is set up.
975 	 */
976 	regulator_bulk_disable(ARRAY_SIZE(priv->supplies), priv->supplies);
977 
978 	if (ret == 0)
979 		ret = devm_snd_soc_register_component(&i2c->dev,
980 					     &soc_component_dev_tas5086,
981 					     &tas5086_dai, 1);
982 
983 	return ret;
984 }
985 
986 static int tas5086_i2c_remove(struct i2c_client *i2c)
987 {
988 	return 0;
989 }
990 
991 static struct i2c_driver tas5086_i2c_driver = {
992 	.driver = {
993 		.name	= "tas5086",
994 		.of_match_table = of_match_ptr(tas5086_dt_ids),
995 	},
996 	.id_table	= tas5086_i2c_id,
997 	.probe		= tas5086_i2c_probe,
998 	.remove		= tas5086_i2c_remove,
999 };
1000 
1001 module_i2c_driver(tas5086_i2c_driver);
1002 
1003 MODULE_AUTHOR("Daniel Mack <zonque@gmail.com>");
1004 MODULE_DESCRIPTION("Texas Instruments TAS5086 ALSA SoC Codec Driver");
1005 MODULE_LICENSE("GPL");
1006