1 /* 2 * File: sound/soc/codecs/ssm2602.h 3 * Author: Cliff Cai <Cliff.Cai@analog.com> 4 * 5 * Created: Tue June 06 2008 6 * 7 * Modified: 8 * Copyright 2008 Analog Devices Inc. 9 * 10 * Bugs: Enter bugs at http://blackfin.uclinux.org/ 11 * 12 * This program is free software; you can redistribute it and/or modify 13 * it under the terms of the GNU General Public License as published by 14 * the Free Software Foundation; either version 2 of the License, or 15 * (at your option) any later version. 16 * 17 * This program is distributed in the hope that it will be useful, 18 * but WITHOUT ANY WARRANTY; without even the implied warranty of 19 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 20 * GNU General Public License for more details. 21 * 22 * You should have received a copy of the GNU General Public License 23 * along with this program; if not, see the file COPYING, or write 24 * to the Free Software Foundation, Inc., 25 * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 26 */ 27 28 #ifndef _SSM2602_H 29 #define _SSM2602_H 30 31 /* SSM2602 Codec Register definitions */ 32 33 #define SSM2602_LINVOL 0x00 34 #define SSM2602_RINVOL 0x01 35 #define SSM2602_LOUT1V 0x02 36 #define SSM2602_ROUT1V 0x03 37 #define SSM2602_APANA 0x04 38 #define SSM2602_APDIGI 0x05 39 #define SSM2602_PWR 0x06 40 #define SSM2602_IFACE 0x07 41 #define SSM2602_SRATE 0x08 42 #define SSM2602_ACTIVE 0x09 43 #define SSM2602_RESET 0x0f 44 45 /*SSM2602 Codec Register Field definitions 46 *(Mask value to extract the corresponding Register field) 47 */ 48 49 /*Left ADC Volume Control (SSM2602_REG_LEFT_ADC_VOL)*/ 50 #define LINVOL_LIN_VOL 0x01F /* Left Channel PGA Volume control */ 51 #define LINVOL_LIN_ENABLE_MUTE 0x080 /* Left Channel Input Mute */ 52 #define LINVOL_LRIN_BOTH 0x100 /* Left Channel Line Input Volume update */ 53 54 /*Right ADC Volume Control (SSM2602_REG_RIGHT_ADC_VOL)*/ 55 #define RINVOL_RIN_VOL 0x01F /* Right Channel PGA Volume control */ 56 #define RINVOL_RIN_ENABLE_MUTE 0x080 /* Right Channel Input Mute */ 57 #define RINVOL_RLIN_BOTH 0x100 /* Right Channel Line Input Volume update */ 58 59 /*Left DAC Volume Control (SSM2602_REG_LEFT_DAC_VOL)*/ 60 #define LOUT1V_LHP_VOL 0x07F /* Left Channel Headphone volume control */ 61 #define LOUT1V_ENABLE_LZC 0x080 /* Left Channel Zero cross detect enable */ 62 #define LOUT1V_LRHP_BOTH 0x100 /* Left Channel Headphone volume update */ 63 64 /*Right DAC Volume Control (SSM2602_REG_RIGHT_DAC_VOL)*/ 65 #define ROUT1V_RHP_VOL 0x07F /* Right Channel Headphone volume control */ 66 #define ROUT1V_ENABLE_RZC 0x080 /* Right Channel Zero cross detect enable */ 67 #define ROUT1V_RLHP_BOTH 0x100 /* Right Channel Headphone volume update */ 68 69 /*Analogue Audio Path Control (SSM2602_REG_ANALOGUE_PATH)*/ 70 #define APANA_ENABLE_MIC_BOOST 0x001 /* Primary Microphone Amplifier gain booster control */ 71 #define APANA_ENABLE_MIC_MUTE 0x002 /* Microphone Mute Control */ 72 #define APANA_ADC_IN_SELECT 0x004 /* Microphone/Line IN select to ADC (1=MIC, 0=Line In) */ 73 #define APANA_ENABLE_BYPASS 0x008 /* Line input bypass to line output */ 74 #define APANA_SELECT_DAC 0x010 /* Select DAC (1=Select DAC, 0=Don't Select DAC) */ 75 #define APANA_ENABLE_SIDETONE 0x020 /* Enable/Disable Side Tone */ 76 #define APANA_SIDETONE_ATTN 0x0C0 /* Side Tone Attenuation */ 77 #define APANA_ENABLE_MIC_BOOST2 0x100 /* Secondary Microphone Amplifier gain booster control */ 78 79 /*Digital Audio Path Control (SSM2602_REG_DIGITAL_PATH)*/ 80 #define APDIGI_ENABLE_ADC_HPF 0x001 /* Enable/Disable ADC Highpass Filter */ 81 #define APDIGI_DE_EMPHASIS 0x006 /* De-Emphasis Control */ 82 #define APDIGI_ENABLE_DAC_MUTE 0x008 /* DAC Mute Control */ 83 #define APDIGI_STORE_OFFSET 0x010 /* Store/Clear DC offset when HPF is disabled */ 84 85 /*Power Down Control (SSM2602_REG_POWER) 86 *(1=Enable PowerDown, 0=Disable PowerDown) 87 */ 88 #define PWR_LINE_IN_PDN 0x001 /* Line Input Power Down */ 89 #define PWR_MIC_PDN 0x002 /* Microphone Input & Bias Power Down */ 90 #define PWR_ADC_PDN 0x004 /* ADC Power Down */ 91 #define PWR_DAC_PDN 0x008 /* DAC Power Down */ 92 #define PWR_OUT_PDN 0x010 /* Outputs Power Down */ 93 #define PWR_OSC_PDN 0x020 /* Oscillator Power Down */ 94 #define PWR_CLK_OUT_PDN 0x040 /* CLKOUT Power Down */ 95 #define PWR_POWER_OFF 0x080 /* POWEROFF Mode */ 96 97 /*Digital Audio Interface Format (SSM2602_REG_DIGITAL_IFACE)*/ 98 #define IFACE_IFACE_FORMAT 0x003 /* Digital Audio input format control */ 99 #define IFACE_AUDIO_DATA_LEN 0x00C /* Audio Data word length control */ 100 #define IFACE_DAC_LR_POLARITY 0x010 /* Polarity Control for clocks in RJ,LJ and I2S modes */ 101 #define IFACE_DAC_LR_SWAP 0x020 /* Swap DAC data control */ 102 #define IFACE_ENABLE_MASTER 0x040 /* Enable/Disable Master Mode */ 103 #define IFACE_BCLK_INVERT 0x080 /* Bit Clock Inversion control */ 104 105 /*Sampling Control (SSM2602_REG_SAMPLING_CTRL)*/ 106 #define SRATE_ENABLE_USB_MODE 0x001 /* Enable/Disable USB Mode */ 107 #define SRATE_BOS_RATE 0x002 /* Base Over-Sampling rate */ 108 #define SRATE_SAMPLE_RATE 0x03C /* Clock setting condition (Sampling rate control) */ 109 #define SRATE_CORECLK_DIV2 0x040 /* Core Clock divider select */ 110 #define SRATE_CLKOUT_DIV2 0x080 /* Clock Out divider select */ 111 112 /*Active Control (SSM2602_REG_ACTIVE_CTRL)*/ 113 #define ACTIVE_ACTIVATE_CODEC 0x001 /* Activate Codec Digital Audio Interface */ 114 115 /*********************************************************************/ 116 117 #define SSM2602_CACHEREGNUM 10 118 119 enum ssm2602_clk { 120 SSM2602_SYSCLK, 121 SSM2602_CLK_CLKOUT, 122 SSM2602_CLK_XTO 123 }; 124 125 #endif 126