1 /* 2 * Nuvoton NAU8825 audio codec driver 3 * 4 * Copyright 2015 Google Chromium project. 5 * Author: Anatol Pomozov <anatol@chromium.org> 6 * Copyright 2015 Nuvoton Technology Corp. 7 * Co-author: Meng-Huang Kuo <mhkuo@nuvoton.com> 8 * 9 * Licensed under the GPL-2. 10 */ 11 12 #include <linux/module.h> 13 #include <linux/delay.h> 14 #include <linux/init.h> 15 #include <linux/i2c.h> 16 #include <linux/regmap.h> 17 #include <linux/slab.h> 18 #include <linux/clk.h> 19 #include <linux/acpi.h> 20 #include <linux/math64.h> 21 #include <linux/semaphore.h> 22 23 #include <sound/initval.h> 24 #include <sound/tlv.h> 25 #include <sound/core.h> 26 #include <sound/pcm.h> 27 #include <sound/pcm_params.h> 28 #include <sound/soc.h> 29 #include <sound/jack.h> 30 31 32 #include "nau8825.h" 33 34 35 #define NUVOTON_CODEC_DAI "nau8825-hifi" 36 37 #define NAU_FREF_MAX 13500000 38 #define NAU_FVCO_MAX 124000000 39 #define NAU_FVCO_MIN 90000000 40 41 /* cross talk suppression detection */ 42 #define LOG10_MAGIC 646456993 43 #define GAIN_AUGMENT 22500 44 #define SIDETONE_BASE 207000 45 46 47 static int nau8825_configure_sysclk(struct nau8825 *nau8825, 48 int clk_id, unsigned int freq); 49 50 struct nau8825_fll { 51 int mclk_src; 52 int ratio; 53 int fll_frac; 54 int fll_int; 55 int clk_ref_div; 56 }; 57 58 struct nau8825_fll_attr { 59 unsigned int param; 60 unsigned int val; 61 }; 62 63 /* scaling for mclk from sysclk_src output */ 64 static const struct nau8825_fll_attr mclk_src_scaling[] = { 65 { 1, 0x0 }, 66 { 2, 0x2 }, 67 { 4, 0x3 }, 68 { 8, 0x4 }, 69 { 16, 0x5 }, 70 { 32, 0x6 }, 71 { 3, 0x7 }, 72 { 6, 0xa }, 73 { 12, 0xb }, 74 { 24, 0xc }, 75 { 48, 0xd }, 76 { 96, 0xe }, 77 { 5, 0xf }, 78 }; 79 80 /* ratio for input clk freq */ 81 static const struct nau8825_fll_attr fll_ratio[] = { 82 { 512000, 0x01 }, 83 { 256000, 0x02 }, 84 { 128000, 0x04 }, 85 { 64000, 0x08 }, 86 { 32000, 0x10 }, 87 { 8000, 0x20 }, 88 { 4000, 0x40 }, 89 }; 90 91 static const struct nau8825_fll_attr fll_pre_scalar[] = { 92 { 1, 0x0 }, 93 { 2, 0x1 }, 94 { 4, 0x2 }, 95 { 8, 0x3 }, 96 }; 97 98 static const struct reg_default nau8825_reg_defaults[] = { 99 { NAU8825_REG_ENA_CTRL, 0x00ff }, 100 { NAU8825_REG_IIC_ADDR_SET, 0x0 }, 101 { NAU8825_REG_CLK_DIVIDER, 0x0050 }, 102 { NAU8825_REG_FLL1, 0x0 }, 103 { NAU8825_REG_FLL2, 0x3126 }, 104 { NAU8825_REG_FLL3, 0x0008 }, 105 { NAU8825_REG_FLL4, 0x0010 }, 106 { NAU8825_REG_FLL5, 0x0 }, 107 { NAU8825_REG_FLL6, 0x6000 }, 108 { NAU8825_REG_FLL_VCO_RSV, 0xf13c }, 109 { NAU8825_REG_HSD_CTRL, 0x000c }, 110 { NAU8825_REG_JACK_DET_CTRL, 0x0 }, 111 { NAU8825_REG_INTERRUPT_MASK, 0x0 }, 112 { NAU8825_REG_INTERRUPT_DIS_CTRL, 0xffff }, 113 { NAU8825_REG_SAR_CTRL, 0x0015 }, 114 { NAU8825_REG_KEYDET_CTRL, 0x0110 }, 115 { NAU8825_REG_VDET_THRESHOLD_1, 0x0 }, 116 { NAU8825_REG_VDET_THRESHOLD_2, 0x0 }, 117 { NAU8825_REG_VDET_THRESHOLD_3, 0x0 }, 118 { NAU8825_REG_VDET_THRESHOLD_4, 0x0 }, 119 { NAU8825_REG_GPIO34_CTRL, 0x0 }, 120 { NAU8825_REG_GPIO12_CTRL, 0x0 }, 121 { NAU8825_REG_TDM_CTRL, 0x0 }, 122 { NAU8825_REG_I2S_PCM_CTRL1, 0x000b }, 123 { NAU8825_REG_I2S_PCM_CTRL2, 0x8010 }, 124 { NAU8825_REG_LEFT_TIME_SLOT, 0x0 }, 125 { NAU8825_REG_RIGHT_TIME_SLOT, 0x0 }, 126 { NAU8825_REG_BIQ_CTRL, 0x0 }, 127 { NAU8825_REG_BIQ_COF1, 0x0 }, 128 { NAU8825_REG_BIQ_COF2, 0x0 }, 129 { NAU8825_REG_BIQ_COF3, 0x0 }, 130 { NAU8825_REG_BIQ_COF4, 0x0 }, 131 { NAU8825_REG_BIQ_COF5, 0x0 }, 132 { NAU8825_REG_BIQ_COF6, 0x0 }, 133 { NAU8825_REG_BIQ_COF7, 0x0 }, 134 { NAU8825_REG_BIQ_COF8, 0x0 }, 135 { NAU8825_REG_BIQ_COF9, 0x0 }, 136 { NAU8825_REG_BIQ_COF10, 0x0 }, 137 { NAU8825_REG_ADC_RATE, 0x0010 }, 138 { NAU8825_REG_DAC_CTRL1, 0x0001 }, 139 { NAU8825_REG_DAC_CTRL2, 0x0 }, 140 { NAU8825_REG_DAC_DGAIN_CTRL, 0x0 }, 141 { NAU8825_REG_ADC_DGAIN_CTRL, 0x00cf }, 142 { NAU8825_REG_MUTE_CTRL, 0x0 }, 143 { NAU8825_REG_HSVOL_CTRL, 0x0 }, 144 { NAU8825_REG_DACL_CTRL, 0x02cf }, 145 { NAU8825_REG_DACR_CTRL, 0x00cf }, 146 { NAU8825_REG_ADC_DRC_KNEE_IP12, 0x1486 }, 147 { NAU8825_REG_ADC_DRC_KNEE_IP34, 0x0f12 }, 148 { NAU8825_REG_ADC_DRC_SLOPES, 0x25ff }, 149 { NAU8825_REG_ADC_DRC_ATKDCY, 0x3457 }, 150 { NAU8825_REG_DAC_DRC_KNEE_IP12, 0x1486 }, 151 { NAU8825_REG_DAC_DRC_KNEE_IP34, 0x0f12 }, 152 { NAU8825_REG_DAC_DRC_SLOPES, 0x25f9 }, 153 { NAU8825_REG_DAC_DRC_ATKDCY, 0x3457 }, 154 { NAU8825_REG_IMM_MODE_CTRL, 0x0 }, 155 { NAU8825_REG_CLASSG_CTRL, 0x0 }, 156 { NAU8825_REG_OPT_EFUSE_CTRL, 0x0 }, 157 { NAU8825_REG_MISC_CTRL, 0x0 }, 158 { NAU8825_REG_BIAS_ADJ, 0x0 }, 159 { NAU8825_REG_TRIM_SETTINGS, 0x0 }, 160 { NAU8825_REG_ANALOG_CONTROL_1, 0x0 }, 161 { NAU8825_REG_ANALOG_CONTROL_2, 0x0 }, 162 { NAU8825_REG_ANALOG_ADC_1, 0x0011 }, 163 { NAU8825_REG_ANALOG_ADC_2, 0x0020 }, 164 { NAU8825_REG_RDAC, 0x0008 }, 165 { NAU8825_REG_MIC_BIAS, 0x0006 }, 166 { NAU8825_REG_BOOST, 0x0 }, 167 { NAU8825_REG_FEPGA, 0x0 }, 168 { NAU8825_REG_POWER_UP_CONTROL, 0x0 }, 169 { NAU8825_REG_CHARGE_PUMP, 0x0 }, 170 }; 171 172 /* register backup table when cross talk detection */ 173 static struct reg_default nau8825_xtalk_baktab[] = { 174 { NAU8825_REG_ADC_DGAIN_CTRL, 0 }, 175 { NAU8825_REG_HSVOL_CTRL, 0 }, 176 { NAU8825_REG_DACL_CTRL, 0 }, 177 { NAU8825_REG_DACR_CTRL, 0 }, 178 }; 179 180 static const unsigned short logtable[256] = { 181 0x0000, 0x0171, 0x02e0, 0x044e, 0x05ba, 0x0725, 0x088e, 0x09f7, 182 0x0b5d, 0x0cc3, 0x0e27, 0x0f8a, 0x10eb, 0x124b, 0x13aa, 0x1508, 183 0x1664, 0x17bf, 0x1919, 0x1a71, 0x1bc8, 0x1d1e, 0x1e73, 0x1fc6, 184 0x2119, 0x226a, 0x23ba, 0x2508, 0x2656, 0x27a2, 0x28ed, 0x2a37, 185 0x2b80, 0x2cc8, 0x2e0f, 0x2f54, 0x3098, 0x31dc, 0x331e, 0x345f, 186 0x359f, 0x36de, 0x381b, 0x3958, 0x3a94, 0x3bce, 0x3d08, 0x3e41, 187 0x3f78, 0x40af, 0x41e4, 0x4319, 0x444c, 0x457f, 0x46b0, 0x47e1, 188 0x4910, 0x4a3f, 0x4b6c, 0x4c99, 0x4dc5, 0x4eef, 0x5019, 0x5142, 189 0x526a, 0x5391, 0x54b7, 0x55dc, 0x5700, 0x5824, 0x5946, 0x5a68, 190 0x5b89, 0x5ca8, 0x5dc7, 0x5ee5, 0x6003, 0x611f, 0x623a, 0x6355, 191 0x646f, 0x6588, 0x66a0, 0x67b7, 0x68ce, 0x69e4, 0x6af8, 0x6c0c, 192 0x6d20, 0x6e32, 0x6f44, 0x7055, 0x7165, 0x7274, 0x7383, 0x7490, 193 0x759d, 0x76aa, 0x77b5, 0x78c0, 0x79ca, 0x7ad3, 0x7bdb, 0x7ce3, 194 0x7dea, 0x7ef0, 0x7ff6, 0x80fb, 0x81ff, 0x8302, 0x8405, 0x8507, 195 0x8608, 0x8709, 0x8809, 0x8908, 0x8a06, 0x8b04, 0x8c01, 0x8cfe, 196 0x8dfa, 0x8ef5, 0x8fef, 0x90e9, 0x91e2, 0x92db, 0x93d2, 0x94ca, 197 0x95c0, 0x96b6, 0x97ab, 0x98a0, 0x9994, 0x9a87, 0x9b7a, 0x9c6c, 198 0x9d5e, 0x9e4f, 0x9f3f, 0xa02e, 0xa11e, 0xa20c, 0xa2fa, 0xa3e7, 199 0xa4d4, 0xa5c0, 0xa6ab, 0xa796, 0xa881, 0xa96a, 0xaa53, 0xab3c, 200 0xac24, 0xad0c, 0xadf2, 0xaed9, 0xafbe, 0xb0a4, 0xb188, 0xb26c, 201 0xb350, 0xb433, 0xb515, 0xb5f7, 0xb6d9, 0xb7ba, 0xb89a, 0xb97a, 202 0xba59, 0xbb38, 0xbc16, 0xbcf4, 0xbdd1, 0xbead, 0xbf8a, 0xc065, 203 0xc140, 0xc21b, 0xc2f5, 0xc3cf, 0xc4a8, 0xc580, 0xc658, 0xc730, 204 0xc807, 0xc8de, 0xc9b4, 0xca8a, 0xcb5f, 0xcc34, 0xcd08, 0xcddc, 205 0xceaf, 0xcf82, 0xd054, 0xd126, 0xd1f7, 0xd2c8, 0xd399, 0xd469, 206 0xd538, 0xd607, 0xd6d6, 0xd7a4, 0xd872, 0xd93f, 0xda0c, 0xdad9, 207 0xdba5, 0xdc70, 0xdd3b, 0xde06, 0xded0, 0xdf9a, 0xe063, 0xe12c, 208 0xe1f5, 0xe2bd, 0xe385, 0xe44c, 0xe513, 0xe5d9, 0xe69f, 0xe765, 209 0xe82a, 0xe8ef, 0xe9b3, 0xea77, 0xeb3b, 0xebfe, 0xecc1, 0xed83, 210 0xee45, 0xef06, 0xefc8, 0xf088, 0xf149, 0xf209, 0xf2c8, 0xf387, 211 0xf446, 0xf505, 0xf5c3, 0xf680, 0xf73e, 0xf7fb, 0xf8b7, 0xf973, 212 0xfa2f, 0xfaea, 0xfba5, 0xfc60, 0xfd1a, 0xfdd4, 0xfe8e, 0xff47 213 }; 214 215 static struct snd_soc_dai *nau8825_get_codec_dai(struct nau8825 *nau8825) 216 { 217 struct snd_soc_codec *codec = snd_soc_dapm_to_codec(nau8825->dapm); 218 struct snd_soc_component *component = &codec->component; 219 struct snd_soc_dai *codec_dai, *_dai; 220 221 list_for_each_entry_safe(codec_dai, _dai, &component->dai_list, list) { 222 if (!strncmp(codec_dai->name, NUVOTON_CODEC_DAI, 223 strlen(NUVOTON_CODEC_DAI))) 224 return codec_dai; 225 } 226 return NULL; 227 } 228 229 static bool nau8825_dai_is_active(struct nau8825 *nau8825) 230 { 231 struct snd_soc_dai *codec_dai = nau8825_get_codec_dai(nau8825); 232 233 if (codec_dai) { 234 if (codec_dai->playback_active || codec_dai->capture_active) 235 return true; 236 } 237 return false; 238 } 239 240 /** 241 * nau8825_sema_acquire - acquire the semaphore of nau88l25 242 * @nau8825: component to register the codec private data with 243 * @timeout: how long in jiffies to wait before failure or zero to wait 244 * until release 245 * 246 * Attempts to acquire the semaphore with number of jiffies. If no more 247 * tasks are allowed to acquire the semaphore, calling this function will 248 * put the task to sleep. If the semaphore is not released within the 249 * specified number of jiffies, this function returns. 250 * Acquires the semaphore without jiffies. If no more tasks are allowed 251 * to acquire the semaphore, calling this function will put the task to 252 * sleep until the semaphore is released. 253 * It returns if the semaphore was acquired. 254 */ 255 static void nau8825_sema_acquire(struct nau8825 *nau8825, long timeout) 256 { 257 int ret; 258 259 if (timeout) 260 ret = down_timeout(&nau8825->xtalk_sem, timeout); 261 else 262 ret = down_interruptible(&nau8825->xtalk_sem); 263 264 if (ret < 0) 265 dev_warn(nau8825->dev, "Acquire semaphone fail\n"); 266 } 267 268 /** 269 * nau8825_sema_release - release the semaphore of nau88l25 270 * @nau8825: component to register the codec private data with 271 * 272 * Release the semaphore which may be called from any context and 273 * even by tasks which have never called down(). 274 */ 275 static inline void nau8825_sema_release(struct nau8825 *nau8825) 276 { 277 up(&nau8825->xtalk_sem); 278 } 279 280 /** 281 * nau8825_sema_reset - reset the semaphore for nau88l25 282 * @nau8825: component to register the codec private data with 283 * 284 * Reset the counter of the semaphore. Call this function to restart 285 * a new round task management. 286 */ 287 static inline void nau8825_sema_reset(struct nau8825 *nau8825) 288 { 289 nau8825->xtalk_sem.count = 1; 290 } 291 292 /** 293 * Ramp up the headphone volume change gradually to target level. 294 * 295 * @nau8825: component to register the codec private data with 296 * @vol_from: the volume to start up 297 * @vol_to: the target volume 298 * @step: the volume span to move on 299 * 300 * The headphone volume is from 0dB to minimum -54dB and -1dB per step. 301 * If the volume changes sharp, there is a pop noise heard in headphone. We 302 * provide the function to ramp up the volume up or down by delaying 10ms 303 * per step. 304 */ 305 static void nau8825_hpvol_ramp(struct nau8825 *nau8825, 306 unsigned int vol_from, unsigned int vol_to, unsigned int step) 307 { 308 unsigned int value, volume, ramp_up, from, to; 309 310 if (vol_from == vol_to || step == 0) { 311 return; 312 } else if (vol_from < vol_to) { 313 ramp_up = true; 314 from = vol_from; 315 to = vol_to; 316 } else { 317 ramp_up = false; 318 from = vol_to; 319 to = vol_from; 320 } 321 /* only handle volume from 0dB to minimum -54dB */ 322 if (to > NAU8825_HP_VOL_MIN) 323 to = NAU8825_HP_VOL_MIN; 324 325 for (volume = from; volume < to; volume += step) { 326 if (ramp_up) 327 value = volume; 328 else 329 value = to - volume + from; 330 regmap_update_bits(nau8825->regmap, NAU8825_REG_HSVOL_CTRL, 331 NAU8825_HPL_VOL_MASK | NAU8825_HPR_VOL_MASK, 332 (value << NAU8825_HPL_VOL_SFT) | value); 333 usleep_range(10000, 10500); 334 } 335 if (ramp_up) 336 value = to; 337 else 338 value = from; 339 regmap_update_bits(nau8825->regmap, NAU8825_REG_HSVOL_CTRL, 340 NAU8825_HPL_VOL_MASK | NAU8825_HPR_VOL_MASK, 341 (value << NAU8825_HPL_VOL_SFT) | value); 342 } 343 344 /** 345 * Computes log10 of a value; the result is round off to 3 decimal. This func- 346 * tion takes reference to dvb-math. The source code locates as the following. 347 * Linux/drivers/media/dvb-core/dvb_math.c 348 * 349 * return log10(value) * 1000 350 */ 351 static u32 nau8825_intlog10_dec3(u32 value) 352 { 353 u32 msb, logentry, significand, interpolation, log10val; 354 u64 log2val; 355 356 /* first detect the msb (count begins at 0) */ 357 msb = fls(value) - 1; 358 /** 359 * now we use a logtable after the following method: 360 * 361 * log2(2^x * y) * 2^24 = x * 2^24 + log2(y) * 2^24 362 * where x = msb and therefore 1 <= y < 2 363 * first y is determined by shifting the value left 364 * so that msb is bit 31 365 * 0x00231f56 -> 0x8C7D5800 366 * the result is y * 2^31 -> "significand" 367 * then the highest 9 bits are used for a table lookup 368 * the highest bit is discarded because it's always set 369 * the highest nine bits in our example are 100011000 370 * so we would use the entry 0x18 371 */ 372 significand = value << (31 - msb); 373 logentry = (significand >> 23) & 0xff; 374 /** 375 * last step we do is interpolation because of the 376 * limitations of the log table the error is that part of 377 * the significand which isn't used for lookup then we 378 * compute the ratio between the error and the next table entry 379 * and interpolate it between the log table entry used and the 380 * next one the biggest error possible is 0x7fffff 381 * (in our example it's 0x7D5800) 382 * needed value for next table entry is 0x800000 383 * so the interpolation is 384 * (error / 0x800000) * (logtable_next - logtable_current) 385 * in the implementation the division is moved to the end for 386 * better accuracy there is also an overflow correction if 387 * logtable_next is 256 388 */ 389 interpolation = ((significand & 0x7fffff) * 390 ((logtable[(logentry + 1) & 0xff] - 391 logtable[logentry]) & 0xffff)) >> 15; 392 393 log2val = ((msb << 24) + (logtable[logentry] << 8) + interpolation); 394 /** 395 * log10(x) = log2(x) * log10(2) 396 */ 397 log10val = (log2val * LOG10_MAGIC) >> 31; 398 /** 399 * the result is round off to 3 decimal 400 */ 401 return log10val / ((1 << 24) / 1000); 402 } 403 404 /** 405 * computes cross talk suppression sidetone gain. 406 * 407 * @sig_org: orignal signal level 408 * @sig_cros: cross talk signal level 409 * 410 * The orignal and cross talk signal vlues need to be characterized. 411 * Once these values have been characterized, this sidetone value 412 * can be converted to decibel with the equation below. 413 * sidetone = 20 * log (original signal level / crosstalk signal level) 414 * 415 * return cross talk sidetone gain 416 */ 417 static u32 nau8825_xtalk_sidetone(u32 sig_org, u32 sig_cros) 418 { 419 u32 gain, sidetone; 420 421 if (unlikely(sig_org == 0) || unlikely(sig_cros == 0)) { 422 WARN_ON(1); 423 return 0; 424 } 425 426 sig_org = nau8825_intlog10_dec3(sig_org); 427 sig_cros = nau8825_intlog10_dec3(sig_cros); 428 if (sig_org >= sig_cros) 429 gain = (sig_org - sig_cros) * 20 + GAIN_AUGMENT; 430 else 431 gain = (sig_cros - sig_org) * 20 + GAIN_AUGMENT; 432 sidetone = SIDETONE_BASE - gain * 2; 433 sidetone /= 1000; 434 435 return sidetone; 436 } 437 438 static int nau8825_xtalk_baktab_index_by_reg(unsigned int reg) 439 { 440 int index; 441 442 for (index = 0; index < ARRAY_SIZE(nau8825_xtalk_baktab); index++) 443 if (nau8825_xtalk_baktab[index].reg == reg) 444 return index; 445 return -EINVAL; 446 } 447 448 static void nau8825_xtalk_backup(struct nau8825 *nau8825) 449 { 450 int i; 451 452 /* Backup some register values to backup table */ 453 for (i = 0; i < ARRAY_SIZE(nau8825_xtalk_baktab); i++) 454 regmap_read(nau8825->regmap, nau8825_xtalk_baktab[i].reg, 455 &nau8825_xtalk_baktab[i].def); 456 } 457 458 static void nau8825_xtalk_restore(struct nau8825 *nau8825) 459 { 460 int i, volume; 461 462 /* Restore register values from backup table; When the driver restores 463 * the headphone volumem, it needs recover to original level gradually 464 * with 3dB per step for less pop noise. 465 */ 466 for (i = 0; i < ARRAY_SIZE(nau8825_xtalk_baktab); i++) { 467 if (nau8825_xtalk_baktab[i].reg == NAU8825_REG_HSVOL_CTRL) { 468 /* Ramping up the volume change to reduce pop noise */ 469 volume = nau8825_xtalk_baktab[i].def & 470 NAU8825_HPR_VOL_MASK; 471 nau8825_hpvol_ramp(nau8825, 0, volume, 3); 472 continue; 473 } 474 regmap_write(nau8825->regmap, nau8825_xtalk_baktab[i].reg, 475 nau8825_xtalk_baktab[i].def); 476 } 477 } 478 479 static void nau8825_xtalk_prepare_dac(struct nau8825 *nau8825) 480 { 481 /* Enable power of DAC path */ 482 regmap_update_bits(nau8825->regmap, NAU8825_REG_ENA_CTRL, 483 NAU8825_ENABLE_DACR | NAU8825_ENABLE_DACL | 484 NAU8825_ENABLE_ADC | NAU8825_ENABLE_ADC_CLK | 485 NAU8825_ENABLE_DAC_CLK, NAU8825_ENABLE_DACR | 486 NAU8825_ENABLE_DACL | NAU8825_ENABLE_ADC | 487 NAU8825_ENABLE_ADC_CLK | NAU8825_ENABLE_DAC_CLK); 488 /* Prevent startup click by letting charge pump to ramp up and 489 * change bump enable 490 */ 491 regmap_update_bits(nau8825->regmap, NAU8825_REG_CHARGE_PUMP, 492 NAU8825_JAMNODCLOW | NAU8825_CHANRGE_PUMP_EN, 493 NAU8825_JAMNODCLOW | NAU8825_CHANRGE_PUMP_EN); 494 /* Enable clock sync of DAC and DAC clock */ 495 regmap_update_bits(nau8825->regmap, NAU8825_REG_RDAC, 496 NAU8825_RDAC_EN | NAU8825_RDAC_CLK_EN | 497 NAU8825_RDAC_FS_BCLK_ENB, 498 NAU8825_RDAC_EN | NAU8825_RDAC_CLK_EN); 499 /* Power up output driver with 2 stage */ 500 regmap_update_bits(nau8825->regmap, NAU8825_REG_POWER_UP_CONTROL, 501 NAU8825_POWERUP_INTEGR_R | NAU8825_POWERUP_INTEGR_L | 502 NAU8825_POWERUP_DRV_IN_R | NAU8825_POWERUP_DRV_IN_L, 503 NAU8825_POWERUP_INTEGR_R | NAU8825_POWERUP_INTEGR_L | 504 NAU8825_POWERUP_DRV_IN_R | NAU8825_POWERUP_DRV_IN_L); 505 regmap_update_bits(nau8825->regmap, NAU8825_REG_POWER_UP_CONTROL, 506 NAU8825_POWERUP_HP_DRV_R | NAU8825_POWERUP_HP_DRV_L, 507 NAU8825_POWERUP_HP_DRV_R | NAU8825_POWERUP_HP_DRV_L); 508 /* HP outputs not shouted to ground */ 509 regmap_update_bits(nau8825->regmap, NAU8825_REG_HSD_CTRL, 510 NAU8825_SPKR_DWN1R | NAU8825_SPKR_DWN1L, 0); 511 /* Enable HP boost driver */ 512 regmap_update_bits(nau8825->regmap, NAU8825_REG_BOOST, 513 NAU8825_HP_BOOST_DIS, NAU8825_HP_BOOST_DIS); 514 /* Enable class G compare path to supply 1.8V or 0.9V. */ 515 regmap_update_bits(nau8825->regmap, NAU8825_REG_CLASSG_CTRL, 516 NAU8825_CLASSG_LDAC_EN | NAU8825_CLASSG_RDAC_EN, 517 NAU8825_CLASSG_LDAC_EN | NAU8825_CLASSG_RDAC_EN); 518 } 519 520 static void nau8825_xtalk_prepare_adc(struct nau8825 *nau8825) 521 { 522 /* Power up left ADC and raise 5dB than Vmid for Vref */ 523 regmap_update_bits(nau8825->regmap, NAU8825_REG_ANALOG_ADC_2, 524 NAU8825_POWERUP_ADCL | NAU8825_ADC_VREFSEL_MASK, 525 NAU8825_POWERUP_ADCL | NAU8825_ADC_VREFSEL_VMID_PLUS_0_5DB); 526 } 527 528 static void nau8825_xtalk_clock(struct nau8825 *nau8825) 529 { 530 /* Recover FLL default value */ 531 regmap_write(nau8825->regmap, NAU8825_REG_FLL1, 0x0); 532 regmap_write(nau8825->regmap, NAU8825_REG_FLL2, 0x3126); 533 regmap_write(nau8825->regmap, NAU8825_REG_FLL3, 0x0008); 534 regmap_write(nau8825->regmap, NAU8825_REG_FLL4, 0x0010); 535 regmap_write(nau8825->regmap, NAU8825_REG_FLL5, 0x0); 536 regmap_write(nau8825->regmap, NAU8825_REG_FLL6, 0x6000); 537 /* Enable internal VCO clock for detection signal generated */ 538 regmap_update_bits(nau8825->regmap, NAU8825_REG_CLK_DIVIDER, 539 NAU8825_CLK_SRC_MASK, NAU8825_CLK_SRC_VCO); 540 regmap_update_bits(nau8825->regmap, NAU8825_REG_FLL6, NAU8825_DCO_EN, 541 NAU8825_DCO_EN); 542 /* Given specific clock frequency of internal clock to 543 * generate signal. 544 */ 545 regmap_update_bits(nau8825->regmap, NAU8825_REG_CLK_DIVIDER, 546 NAU8825_CLK_MCLK_SRC_MASK, 0xf); 547 regmap_update_bits(nau8825->regmap, NAU8825_REG_FLL1, 548 NAU8825_FLL_RATIO_MASK, 0x10); 549 } 550 551 static void nau8825_xtalk_prepare(struct nau8825 *nau8825) 552 { 553 int volume, index; 554 555 /* Backup those registers changed by cross talk detection */ 556 nau8825_xtalk_backup(nau8825); 557 /* Config IIS as master to output signal by codec */ 558 regmap_update_bits(nau8825->regmap, NAU8825_REG_I2S_PCM_CTRL2, 559 NAU8825_I2S_MS_MASK | NAU8825_I2S_DRV_MASK | 560 NAU8825_I2S_BLK_DIV_MASK, NAU8825_I2S_MS_MASTER | 561 (0x2 << NAU8825_I2S_DRV_SFT) | 0x1); 562 /* Ramp up headphone volume to 0dB to get better performance and 563 * avoid pop noise in headphone. 564 */ 565 index = nau8825_xtalk_baktab_index_by_reg(NAU8825_REG_HSVOL_CTRL); 566 if (index != -EINVAL) { 567 volume = nau8825_xtalk_baktab[index].def & 568 NAU8825_HPR_VOL_MASK; 569 nau8825_hpvol_ramp(nau8825, volume, 0, 3); 570 } 571 nau8825_xtalk_clock(nau8825); 572 nau8825_xtalk_prepare_dac(nau8825); 573 nau8825_xtalk_prepare_adc(nau8825); 574 /* Config channel path and digital gain */ 575 regmap_update_bits(nau8825->regmap, NAU8825_REG_DACL_CTRL, 576 NAU8825_DACL_CH_SEL_MASK | NAU8825_DACL_CH_VOL_MASK, 577 NAU8825_DACL_CH_SEL_L | 0xab); 578 regmap_update_bits(nau8825->regmap, NAU8825_REG_DACR_CTRL, 579 NAU8825_DACR_CH_SEL_MASK | NAU8825_DACR_CH_VOL_MASK, 580 NAU8825_DACR_CH_SEL_R | 0xab); 581 /* Config cross talk parameters and generate the 23Hz sine wave with 582 * 1/16 full scale of signal level for impedance measurement. 583 */ 584 regmap_update_bits(nau8825->regmap, NAU8825_REG_IMM_MODE_CTRL, 585 NAU8825_IMM_THD_MASK | NAU8825_IMM_GEN_VOL_MASK | 586 NAU8825_IMM_CYC_MASK | NAU8825_IMM_DAC_SRC_MASK, 587 (0x9 << NAU8825_IMM_THD_SFT) | NAU8825_IMM_GEN_VOL_1_16th | 588 NAU8825_IMM_CYC_8192 | NAU8825_IMM_DAC_SRC_SIN); 589 /* RMS intrruption enable */ 590 regmap_update_bits(nau8825->regmap, 591 NAU8825_REG_INTERRUPT_MASK, NAU8825_IRQ_RMS_EN, 0); 592 /* Power up left and right DAC */ 593 regmap_update_bits(nau8825->regmap, NAU8825_REG_CHARGE_PUMP, 594 NAU8825_POWER_DOWN_DACR | NAU8825_POWER_DOWN_DACL, 0); 595 } 596 597 static void nau8825_xtalk_clean_dac(struct nau8825 *nau8825) 598 { 599 /* Disable HP boost driver */ 600 regmap_update_bits(nau8825->regmap, NAU8825_REG_BOOST, 601 NAU8825_HP_BOOST_DIS, 0); 602 /* HP outputs shouted to ground */ 603 regmap_update_bits(nau8825->regmap, NAU8825_REG_HSD_CTRL, 604 NAU8825_SPKR_DWN1R | NAU8825_SPKR_DWN1L, 605 NAU8825_SPKR_DWN1R | NAU8825_SPKR_DWN1L); 606 /* Power down left and right DAC */ 607 regmap_update_bits(nau8825->regmap, NAU8825_REG_CHARGE_PUMP, 608 NAU8825_POWER_DOWN_DACR | NAU8825_POWER_DOWN_DACL, 609 NAU8825_POWER_DOWN_DACR | NAU8825_POWER_DOWN_DACL); 610 /* Enable the TESTDAC and disable L/R HP impedance */ 611 regmap_update_bits(nau8825->regmap, NAU8825_REG_BIAS_ADJ, 612 NAU8825_BIAS_HPR_IMP | NAU8825_BIAS_HPL_IMP | 613 NAU8825_BIAS_TESTDAC_EN, NAU8825_BIAS_TESTDAC_EN); 614 /* Power down output driver with 2 stage */ 615 regmap_update_bits(nau8825->regmap, NAU8825_REG_POWER_UP_CONTROL, 616 NAU8825_POWERUP_HP_DRV_R | NAU8825_POWERUP_HP_DRV_L, 0); 617 regmap_update_bits(nau8825->regmap, NAU8825_REG_POWER_UP_CONTROL, 618 NAU8825_POWERUP_INTEGR_R | NAU8825_POWERUP_INTEGR_L | 619 NAU8825_POWERUP_DRV_IN_R | NAU8825_POWERUP_DRV_IN_L, 0); 620 /* Disable clock sync of DAC and DAC clock */ 621 regmap_update_bits(nau8825->regmap, NAU8825_REG_RDAC, 622 NAU8825_RDAC_EN | NAU8825_RDAC_CLK_EN, 0); 623 /* Disable charge pump ramp up function and change bump */ 624 regmap_update_bits(nau8825->regmap, NAU8825_REG_CHARGE_PUMP, 625 NAU8825_JAMNODCLOW | NAU8825_CHANRGE_PUMP_EN, 0); 626 /* Disable power of DAC path */ 627 regmap_update_bits(nau8825->regmap, NAU8825_REG_ENA_CTRL, 628 NAU8825_ENABLE_DACR | NAU8825_ENABLE_DACL | 629 NAU8825_ENABLE_ADC_CLK | NAU8825_ENABLE_DAC_CLK, 0); 630 if (!nau8825->irq) 631 regmap_update_bits(nau8825->regmap, 632 NAU8825_REG_ENA_CTRL, NAU8825_ENABLE_ADC, 0); 633 } 634 635 static void nau8825_xtalk_clean_adc(struct nau8825 *nau8825) 636 { 637 /* Power down left ADC and restore voltage to Vmid */ 638 regmap_update_bits(nau8825->regmap, NAU8825_REG_ANALOG_ADC_2, 639 NAU8825_POWERUP_ADCL | NAU8825_ADC_VREFSEL_MASK, 0); 640 } 641 642 static void nau8825_xtalk_clean(struct nau8825 *nau8825) 643 { 644 /* Enable internal VCO needed for interruptions */ 645 nau8825_configure_sysclk(nau8825, NAU8825_CLK_INTERNAL, 0); 646 nau8825_xtalk_clean_dac(nau8825); 647 nau8825_xtalk_clean_adc(nau8825); 648 /* Clear cross talk parameters and disable */ 649 regmap_write(nau8825->regmap, NAU8825_REG_IMM_MODE_CTRL, 0); 650 /* RMS intrruption disable */ 651 regmap_update_bits(nau8825->regmap, NAU8825_REG_INTERRUPT_MASK, 652 NAU8825_IRQ_RMS_EN, NAU8825_IRQ_RMS_EN); 653 /* Recover default value for IIS */ 654 regmap_update_bits(nau8825->regmap, NAU8825_REG_I2S_PCM_CTRL2, 655 NAU8825_I2S_MS_MASK | NAU8825_I2S_DRV_MASK | 656 NAU8825_I2S_BLK_DIV_MASK, NAU8825_I2S_MS_SLAVE); 657 /* Restore value of specific register for cross talk */ 658 nau8825_xtalk_restore(nau8825); 659 } 660 661 static void nau8825_xtalk_imm_start(struct nau8825 *nau8825, int vol) 662 { 663 /* Apply ADC volume for better cross talk performance */ 664 regmap_update_bits(nau8825->regmap, NAU8825_REG_ADC_DGAIN_CTRL, 665 NAU8825_ADC_DIG_VOL_MASK, vol); 666 /* Disables JKTIP(HPL) DAC channel for right to left measurement. 667 * Do it before sending signal in order to erase pop noise. 668 */ 669 regmap_update_bits(nau8825->regmap, NAU8825_REG_BIAS_ADJ, 670 NAU8825_BIAS_TESTDACR_EN | NAU8825_BIAS_TESTDACL_EN, 671 NAU8825_BIAS_TESTDACL_EN); 672 switch (nau8825->xtalk_state) { 673 case NAU8825_XTALK_HPR_R2L: 674 /* Enable right headphone impedance */ 675 regmap_update_bits(nau8825->regmap, NAU8825_REG_BIAS_ADJ, 676 NAU8825_BIAS_HPR_IMP | NAU8825_BIAS_HPL_IMP, 677 NAU8825_BIAS_HPR_IMP); 678 break; 679 case NAU8825_XTALK_HPL_R2L: 680 /* Enable left headphone impedance */ 681 regmap_update_bits(nau8825->regmap, NAU8825_REG_BIAS_ADJ, 682 NAU8825_BIAS_HPR_IMP | NAU8825_BIAS_HPL_IMP, 683 NAU8825_BIAS_HPL_IMP); 684 break; 685 default: 686 break; 687 } 688 msleep(100); 689 /* Impedance measurement mode enable */ 690 regmap_update_bits(nau8825->regmap, NAU8825_REG_IMM_MODE_CTRL, 691 NAU8825_IMM_EN, NAU8825_IMM_EN); 692 } 693 694 static void nau8825_xtalk_imm_stop(struct nau8825 *nau8825) 695 { 696 /* Impedance measurement mode disable */ 697 regmap_update_bits(nau8825->regmap, 698 NAU8825_REG_IMM_MODE_CTRL, NAU8825_IMM_EN, 0); 699 } 700 701 /* The cross talk measurement function can reduce cross talk across the 702 * JKTIP(HPL) and JKR1(HPR) outputs which measures the cross talk signal 703 * level to determine what cross talk reduction gain is. This system works by 704 * sending a 23Hz -24dBV sine wave into the headset output DAC and through 705 * the PGA. The output of the PGA is then connected to an internal current 706 * sense which measures the attenuated 23Hz signal and passing the output to 707 * an ADC which converts the measurement to a binary code. With two separated 708 * measurement, one for JKR1(HPR) and the other JKTIP(HPL), measurement data 709 * can be separated read in IMM_RMS_L for HSR and HSL after each measurement. 710 * Thus, the measurement function has four states to complete whole sequence. 711 * 1. Prepare state : Prepare the resource for detection and transfer to HPR 712 * IMM stat to make JKR1(HPR) impedance measure. 713 * 2. HPR IMM state : Read out orignal signal level of JKR1(HPR) and transfer 714 * to HPL IMM state to make JKTIP(HPL) impedance measure. 715 * 3. HPL IMM state : Read out cross talk signal level of JKTIP(HPL) and 716 * transfer to IMM state to determine suppression sidetone gain. 717 * 4. IMM state : Computes cross talk suppression sidetone gain with orignal 718 * and cross talk signal level. Apply this gain and then restore codec 719 * configuration. Then transfer to Done state for ending. 720 */ 721 static void nau8825_xtalk_measure(struct nau8825 *nau8825) 722 { 723 u32 sidetone; 724 725 switch (nau8825->xtalk_state) { 726 case NAU8825_XTALK_PREPARE: 727 /* In prepare state, set up clock, intrruption, DAC path, ADC 728 * path and cross talk detection parameters for preparation. 729 */ 730 nau8825_xtalk_prepare(nau8825); 731 msleep(280); 732 /* Trigger right headphone impedance detection */ 733 nau8825->xtalk_state = NAU8825_XTALK_HPR_R2L; 734 nau8825_xtalk_imm_start(nau8825, 0x00d2); 735 break; 736 case NAU8825_XTALK_HPR_R2L: 737 /* In right headphone IMM state, read out right headphone 738 * impedance measure result, and then start up left side. 739 */ 740 regmap_read(nau8825->regmap, NAU8825_REG_IMM_RMS_L, 741 &nau8825->imp_rms[NAU8825_XTALK_HPR_R2L]); 742 dev_dbg(nau8825->dev, "HPR_R2L imm: %x\n", 743 nau8825->imp_rms[NAU8825_XTALK_HPR_R2L]); 744 /* Disable then re-enable IMM mode to update */ 745 nau8825_xtalk_imm_stop(nau8825); 746 /* Trigger left headphone impedance detection */ 747 nau8825->xtalk_state = NAU8825_XTALK_HPL_R2L; 748 nau8825_xtalk_imm_start(nau8825, 0x00ff); 749 break; 750 case NAU8825_XTALK_HPL_R2L: 751 /* In left headphone IMM state, read out left headphone 752 * impedance measure result, and delay some time to wait 753 * detection sine wave output finish. Then, we can calculate 754 * the cross talk suppresstion side tone according to the L/R 755 * headphone imedance. 756 */ 757 regmap_read(nau8825->regmap, NAU8825_REG_IMM_RMS_L, 758 &nau8825->imp_rms[NAU8825_XTALK_HPL_R2L]); 759 dev_dbg(nau8825->dev, "HPL_R2L imm: %x\n", 760 nau8825->imp_rms[NAU8825_XTALK_HPL_R2L]); 761 nau8825_xtalk_imm_stop(nau8825); 762 msleep(150); 763 nau8825->xtalk_state = NAU8825_XTALK_IMM; 764 break; 765 case NAU8825_XTALK_IMM: 766 /* In impedance measure state, the orignal and cross talk 767 * signal level vlues are ready. The side tone gain is deter- 768 * mined with these signal level. After all, restore codec 769 * configuration. 770 */ 771 sidetone = nau8825_xtalk_sidetone( 772 nau8825->imp_rms[NAU8825_XTALK_HPR_R2L], 773 nau8825->imp_rms[NAU8825_XTALK_HPL_R2L]); 774 dev_dbg(nau8825->dev, "cross talk sidetone: %x\n", sidetone); 775 regmap_write(nau8825->regmap, NAU8825_REG_DAC_DGAIN_CTRL, 776 (sidetone << 8) | sidetone); 777 nau8825_xtalk_clean(nau8825); 778 nau8825->xtalk_state = NAU8825_XTALK_DONE; 779 break; 780 default: 781 break; 782 } 783 } 784 785 static void nau8825_xtalk_work(struct work_struct *work) 786 { 787 struct nau8825 *nau8825 = container_of( 788 work, struct nau8825, xtalk_work); 789 790 nau8825_xtalk_measure(nau8825); 791 /* To determine the cross talk side tone gain when reach 792 * the impedance measure state. 793 */ 794 if (nau8825->xtalk_state == NAU8825_XTALK_IMM) 795 nau8825_xtalk_measure(nau8825); 796 797 /* Delay jack report until cross talk detection process 798 * completed. It can avoid application to do playback 799 * preparation before cross talk detection is still working. 800 * Meanwhile, the protection of the cross talk detection 801 * is released. 802 */ 803 if (nau8825->xtalk_state == NAU8825_XTALK_DONE) { 804 snd_soc_jack_report(nau8825->jack, nau8825->xtalk_event, 805 nau8825->xtalk_event_mask); 806 nau8825_sema_release(nau8825); 807 nau8825->xtalk_protect = false; 808 } 809 } 810 811 static void nau8825_xtalk_cancel(struct nau8825 *nau8825) 812 { 813 /* If the xtalk_protect is true, that means the process is still 814 * on going. The driver forces to cancel the cross talk task and 815 * restores the configuration to original status. 816 */ 817 if (nau8825->xtalk_protect) { 818 cancel_work_sync(&nau8825->xtalk_work); 819 nau8825_xtalk_clean(nau8825); 820 } 821 /* Reset parameters for cross talk suppression function */ 822 nau8825_sema_reset(nau8825); 823 nau8825->xtalk_state = NAU8825_XTALK_DONE; 824 nau8825->xtalk_protect = false; 825 } 826 827 static bool nau8825_readable_reg(struct device *dev, unsigned int reg) 828 { 829 switch (reg) { 830 case NAU8825_REG_ENA_CTRL ... NAU8825_REG_FLL_VCO_RSV: 831 case NAU8825_REG_HSD_CTRL ... NAU8825_REG_JACK_DET_CTRL: 832 case NAU8825_REG_INTERRUPT_MASK ... NAU8825_REG_KEYDET_CTRL: 833 case NAU8825_REG_VDET_THRESHOLD_1 ... NAU8825_REG_DACR_CTRL: 834 case NAU8825_REG_ADC_DRC_KNEE_IP12 ... NAU8825_REG_ADC_DRC_ATKDCY: 835 case NAU8825_REG_DAC_DRC_KNEE_IP12 ... NAU8825_REG_DAC_DRC_ATKDCY: 836 case NAU8825_REG_IMM_MODE_CTRL ... NAU8825_REG_IMM_RMS_R: 837 case NAU8825_REG_CLASSG_CTRL ... NAU8825_REG_OPT_EFUSE_CTRL: 838 case NAU8825_REG_MISC_CTRL: 839 case NAU8825_REG_I2C_DEVICE_ID ... NAU8825_REG_SARDOUT_RAM_STATUS: 840 case NAU8825_REG_BIAS_ADJ: 841 case NAU8825_REG_TRIM_SETTINGS ... NAU8825_REG_ANALOG_CONTROL_2: 842 case NAU8825_REG_ANALOG_ADC_1 ... NAU8825_REG_MIC_BIAS: 843 case NAU8825_REG_BOOST ... NAU8825_REG_FEPGA: 844 case NAU8825_REG_POWER_UP_CONTROL ... NAU8825_REG_GENERAL_STATUS: 845 return true; 846 default: 847 return false; 848 } 849 850 } 851 852 static bool nau8825_writeable_reg(struct device *dev, unsigned int reg) 853 { 854 switch (reg) { 855 case NAU8825_REG_RESET ... NAU8825_REG_FLL_VCO_RSV: 856 case NAU8825_REG_HSD_CTRL ... NAU8825_REG_JACK_DET_CTRL: 857 case NAU8825_REG_INTERRUPT_MASK: 858 case NAU8825_REG_INT_CLR_KEY_STATUS ... NAU8825_REG_KEYDET_CTRL: 859 case NAU8825_REG_VDET_THRESHOLD_1 ... NAU8825_REG_DACR_CTRL: 860 case NAU8825_REG_ADC_DRC_KNEE_IP12 ... NAU8825_REG_ADC_DRC_ATKDCY: 861 case NAU8825_REG_DAC_DRC_KNEE_IP12 ... NAU8825_REG_DAC_DRC_ATKDCY: 862 case NAU8825_REG_IMM_MODE_CTRL: 863 case NAU8825_REG_CLASSG_CTRL ... NAU8825_REG_OPT_EFUSE_CTRL: 864 case NAU8825_REG_MISC_CTRL: 865 case NAU8825_REG_BIAS_ADJ: 866 case NAU8825_REG_TRIM_SETTINGS ... NAU8825_REG_ANALOG_CONTROL_2: 867 case NAU8825_REG_ANALOG_ADC_1 ... NAU8825_REG_MIC_BIAS: 868 case NAU8825_REG_BOOST ... NAU8825_REG_FEPGA: 869 case NAU8825_REG_POWER_UP_CONTROL ... NAU8825_REG_CHARGE_PUMP: 870 return true; 871 default: 872 return false; 873 } 874 } 875 876 static bool nau8825_volatile_reg(struct device *dev, unsigned int reg) 877 { 878 switch (reg) { 879 case NAU8825_REG_RESET: 880 case NAU8825_REG_IRQ_STATUS: 881 case NAU8825_REG_INT_CLR_KEY_STATUS: 882 case NAU8825_REG_IMM_RMS_L: 883 case NAU8825_REG_IMM_RMS_R: 884 case NAU8825_REG_I2C_DEVICE_ID: 885 case NAU8825_REG_SARDOUT_RAM_STATUS: 886 case NAU8825_REG_CHARGE_PUMP_INPUT_READ: 887 case NAU8825_REG_GENERAL_STATUS: 888 case NAU8825_REG_BIQ_CTRL ... NAU8825_REG_BIQ_COF10: 889 return true; 890 default: 891 return false; 892 } 893 } 894 895 static int nau8825_adc_event(struct snd_soc_dapm_widget *w, 896 struct snd_kcontrol *kcontrol, int event) 897 { 898 struct snd_soc_codec *codec = snd_soc_dapm_to_codec(w->dapm); 899 struct nau8825 *nau8825 = snd_soc_codec_get_drvdata(codec); 900 901 switch (event) { 902 case SND_SOC_DAPM_POST_PMU: 903 regmap_update_bits(nau8825->regmap, NAU8825_REG_ENA_CTRL, 904 NAU8825_ENABLE_ADC, NAU8825_ENABLE_ADC); 905 break; 906 case SND_SOC_DAPM_POST_PMD: 907 if (!nau8825->irq) 908 regmap_update_bits(nau8825->regmap, 909 NAU8825_REG_ENA_CTRL, NAU8825_ENABLE_ADC, 0); 910 break; 911 default: 912 return -EINVAL; 913 } 914 915 return 0; 916 } 917 918 static int nau8825_pump_event(struct snd_soc_dapm_widget *w, 919 struct snd_kcontrol *kcontrol, int event) 920 { 921 struct snd_soc_codec *codec = snd_soc_dapm_to_codec(w->dapm); 922 struct nau8825 *nau8825 = snd_soc_codec_get_drvdata(codec); 923 924 switch (event) { 925 case SND_SOC_DAPM_POST_PMU: 926 /* Prevent startup click by letting charge pump to ramp up */ 927 msleep(10); 928 regmap_update_bits(nau8825->regmap, NAU8825_REG_CHARGE_PUMP, 929 NAU8825_JAMNODCLOW, NAU8825_JAMNODCLOW); 930 break; 931 case SND_SOC_DAPM_PRE_PMD: 932 regmap_update_bits(nau8825->regmap, NAU8825_REG_CHARGE_PUMP, 933 NAU8825_JAMNODCLOW, 0); 934 break; 935 default: 936 return -EINVAL; 937 } 938 939 return 0; 940 } 941 942 static int nau8825_output_dac_event(struct snd_soc_dapm_widget *w, 943 struct snd_kcontrol *kcontrol, int event) 944 { 945 struct snd_soc_codec *codec = snd_soc_dapm_to_codec(w->dapm); 946 struct nau8825 *nau8825 = snd_soc_codec_get_drvdata(codec); 947 948 switch (event) { 949 case SND_SOC_DAPM_PRE_PMU: 950 /* Disables the TESTDAC to let DAC signal pass through. */ 951 regmap_update_bits(nau8825->regmap, NAU8825_REG_BIAS_ADJ, 952 NAU8825_BIAS_TESTDAC_EN, 0); 953 break; 954 case SND_SOC_DAPM_POST_PMD: 955 regmap_update_bits(nau8825->regmap, NAU8825_REG_BIAS_ADJ, 956 NAU8825_BIAS_TESTDAC_EN, NAU8825_BIAS_TESTDAC_EN); 957 break; 958 default: 959 return -EINVAL; 960 } 961 962 return 0; 963 } 964 965 static int nau8825_biq_coeff_get(struct snd_kcontrol *kcontrol, 966 struct snd_ctl_elem_value *ucontrol) 967 { 968 struct snd_soc_component *component = snd_kcontrol_chip(kcontrol); 969 struct soc_bytes_ext *params = (void *)kcontrol->private_value; 970 971 if (!component->regmap) 972 return -EINVAL; 973 974 regmap_raw_read(component->regmap, NAU8825_REG_BIQ_COF1, 975 ucontrol->value.bytes.data, params->max); 976 return 0; 977 } 978 979 static int nau8825_biq_coeff_put(struct snd_kcontrol *kcontrol, 980 struct snd_ctl_elem_value *ucontrol) 981 { 982 struct snd_soc_component *component = snd_kcontrol_chip(kcontrol); 983 struct soc_bytes_ext *params = (void *)kcontrol->private_value; 984 void *data; 985 986 if (!component->regmap) 987 return -EINVAL; 988 989 data = kmemdup(ucontrol->value.bytes.data, 990 params->max, GFP_KERNEL | GFP_DMA); 991 if (!data) 992 return -ENOMEM; 993 994 regmap_update_bits(component->regmap, NAU8825_REG_BIQ_CTRL, 995 NAU8825_BIQ_WRT_EN, 0); 996 regmap_raw_write(component->regmap, NAU8825_REG_BIQ_COF1, 997 data, params->max); 998 regmap_update_bits(component->regmap, NAU8825_REG_BIQ_CTRL, 999 NAU8825_BIQ_WRT_EN, NAU8825_BIQ_WRT_EN); 1000 1001 kfree(data); 1002 return 0; 1003 } 1004 1005 static const char * const nau8825_biq_path[] = { 1006 "ADC", "DAC" 1007 }; 1008 1009 static const struct soc_enum nau8825_biq_path_enum = 1010 SOC_ENUM_SINGLE(NAU8825_REG_BIQ_CTRL, NAU8825_BIQ_PATH_SFT, 1011 ARRAY_SIZE(nau8825_biq_path), nau8825_biq_path); 1012 1013 static const char * const nau8825_adc_decimation[] = { 1014 "32", "64", "128", "256" 1015 }; 1016 1017 static const struct soc_enum nau8825_adc_decimation_enum = 1018 SOC_ENUM_SINGLE(NAU8825_REG_ADC_RATE, NAU8825_ADC_SYNC_DOWN_SFT, 1019 ARRAY_SIZE(nau8825_adc_decimation), nau8825_adc_decimation); 1020 1021 static const char * const nau8825_dac_oversampl[] = { 1022 "64", "256", "128", "", "32" 1023 }; 1024 1025 static const struct soc_enum nau8825_dac_oversampl_enum = 1026 SOC_ENUM_SINGLE(NAU8825_REG_DAC_CTRL1, NAU8825_DAC_OVERSAMPLE_SFT, 1027 ARRAY_SIZE(nau8825_dac_oversampl), nau8825_dac_oversampl); 1028 1029 static const DECLARE_TLV_DB_MINMAX_MUTE(adc_vol_tlv, -10300, 2400); 1030 static const DECLARE_TLV_DB_MINMAX_MUTE(sidetone_vol_tlv, -4200, 0); 1031 static const DECLARE_TLV_DB_MINMAX(dac_vol_tlv, -5400, 0); 1032 static const DECLARE_TLV_DB_MINMAX(fepga_gain_tlv, -100, 3600); 1033 static const DECLARE_TLV_DB_MINMAX_MUTE(crosstalk_vol_tlv, -9600, 2400); 1034 1035 static const struct snd_kcontrol_new nau8825_controls[] = { 1036 SOC_SINGLE_TLV("Mic Volume", NAU8825_REG_ADC_DGAIN_CTRL, 1037 0, 0xff, 0, adc_vol_tlv), 1038 SOC_DOUBLE_TLV("Headphone Bypass Volume", NAU8825_REG_ADC_DGAIN_CTRL, 1039 12, 8, 0x0f, 0, sidetone_vol_tlv), 1040 SOC_DOUBLE_TLV("Headphone Volume", NAU8825_REG_HSVOL_CTRL, 1041 6, 0, 0x3f, 1, dac_vol_tlv), 1042 SOC_SINGLE_TLV("Frontend PGA Volume", NAU8825_REG_POWER_UP_CONTROL, 1043 8, 37, 0, fepga_gain_tlv), 1044 SOC_DOUBLE_TLV("Headphone Crosstalk Volume", NAU8825_REG_DAC_DGAIN_CTRL, 1045 0, 8, 0xff, 0, crosstalk_vol_tlv), 1046 1047 SOC_ENUM("ADC Decimation Rate", nau8825_adc_decimation_enum), 1048 SOC_ENUM("DAC Oversampling Rate", nau8825_dac_oversampl_enum), 1049 /* programmable biquad filter */ 1050 SOC_ENUM("BIQ Path Select", nau8825_biq_path_enum), 1051 SND_SOC_BYTES_EXT("BIQ Coefficients", 20, 1052 nau8825_biq_coeff_get, nau8825_biq_coeff_put), 1053 }; 1054 1055 /* DAC Mux 0x33[9] and 0x34[9] */ 1056 static const char * const nau8825_dac_src[] = { 1057 "DACL", "DACR", 1058 }; 1059 1060 static SOC_ENUM_SINGLE_DECL( 1061 nau8825_dacl_enum, NAU8825_REG_DACL_CTRL, 1062 NAU8825_DACL_CH_SEL_SFT, nau8825_dac_src); 1063 1064 static SOC_ENUM_SINGLE_DECL( 1065 nau8825_dacr_enum, NAU8825_REG_DACR_CTRL, 1066 NAU8825_DACR_CH_SEL_SFT, nau8825_dac_src); 1067 1068 static const struct snd_kcontrol_new nau8825_dacl_mux = 1069 SOC_DAPM_ENUM("DACL Source", nau8825_dacl_enum); 1070 1071 static const struct snd_kcontrol_new nau8825_dacr_mux = 1072 SOC_DAPM_ENUM("DACR Source", nau8825_dacr_enum); 1073 1074 1075 static const struct snd_soc_dapm_widget nau8825_dapm_widgets[] = { 1076 SND_SOC_DAPM_AIF_OUT("AIFTX", "Capture", 0, NAU8825_REG_I2S_PCM_CTRL2, 1077 15, 1), 1078 1079 SND_SOC_DAPM_INPUT("MIC"), 1080 SND_SOC_DAPM_MICBIAS("MICBIAS", NAU8825_REG_MIC_BIAS, 8, 0), 1081 1082 SND_SOC_DAPM_PGA("Frontend PGA", NAU8825_REG_POWER_UP_CONTROL, 14, 0, 1083 NULL, 0), 1084 1085 SND_SOC_DAPM_ADC_E("ADC", NULL, SND_SOC_NOPM, 0, 0, 1086 nau8825_adc_event, SND_SOC_DAPM_POST_PMU | 1087 SND_SOC_DAPM_POST_PMD), 1088 SND_SOC_DAPM_SUPPLY("ADC Clock", NAU8825_REG_ENA_CTRL, 7, 0, NULL, 0), 1089 SND_SOC_DAPM_SUPPLY("ADC Power", NAU8825_REG_ANALOG_ADC_2, 6, 0, NULL, 1090 0), 1091 1092 /* ADC for button press detection. A dapm supply widget is used to 1093 * prevent dapm_power_widgets keeping the codec at SND_SOC_BIAS_ON 1094 * during suspend. 1095 */ 1096 SND_SOC_DAPM_SUPPLY("SAR", NAU8825_REG_SAR_CTRL, 1097 NAU8825_SAR_ADC_EN_SFT, 0, NULL, 0), 1098 1099 SND_SOC_DAPM_PGA_S("ADACL", 2, NAU8825_REG_RDAC, 12, 0, NULL, 0), 1100 SND_SOC_DAPM_PGA_S("ADACR", 2, NAU8825_REG_RDAC, 13, 0, NULL, 0), 1101 SND_SOC_DAPM_PGA_S("ADACL Clock", 3, NAU8825_REG_RDAC, 8, 0, NULL, 0), 1102 SND_SOC_DAPM_PGA_S("ADACR Clock", 3, NAU8825_REG_RDAC, 9, 0, NULL, 0), 1103 1104 SND_SOC_DAPM_DAC("DDACR", NULL, NAU8825_REG_ENA_CTRL, 1105 NAU8825_ENABLE_DACR_SFT, 0), 1106 SND_SOC_DAPM_DAC("DDACL", NULL, NAU8825_REG_ENA_CTRL, 1107 NAU8825_ENABLE_DACL_SFT, 0), 1108 SND_SOC_DAPM_SUPPLY("DDAC Clock", NAU8825_REG_ENA_CTRL, 6, 0, NULL, 0), 1109 1110 SND_SOC_DAPM_MUX("DACL Mux", SND_SOC_NOPM, 0, 0, &nau8825_dacl_mux), 1111 SND_SOC_DAPM_MUX("DACR Mux", SND_SOC_NOPM, 0, 0, &nau8825_dacr_mux), 1112 1113 SND_SOC_DAPM_PGA_S("HP amp L", 0, 1114 NAU8825_REG_CLASSG_CTRL, 1, 0, NULL, 0), 1115 SND_SOC_DAPM_PGA_S("HP amp R", 0, 1116 NAU8825_REG_CLASSG_CTRL, 2, 0, NULL, 0), 1117 1118 SND_SOC_DAPM_PGA_S("Charge Pump", 1, NAU8825_REG_CHARGE_PUMP, 5, 0, 1119 nau8825_pump_event, SND_SOC_DAPM_POST_PMU | 1120 SND_SOC_DAPM_PRE_PMD), 1121 1122 SND_SOC_DAPM_PGA_S("Output Driver R Stage 1", 4, 1123 NAU8825_REG_POWER_UP_CONTROL, 5, 0, NULL, 0), 1124 SND_SOC_DAPM_PGA_S("Output Driver L Stage 1", 4, 1125 NAU8825_REG_POWER_UP_CONTROL, 4, 0, NULL, 0), 1126 SND_SOC_DAPM_PGA_S("Output Driver R Stage 2", 5, 1127 NAU8825_REG_POWER_UP_CONTROL, 3, 0, NULL, 0), 1128 SND_SOC_DAPM_PGA_S("Output Driver L Stage 2", 5, 1129 NAU8825_REG_POWER_UP_CONTROL, 2, 0, NULL, 0), 1130 SND_SOC_DAPM_PGA_S("Output Driver R Stage 3", 6, 1131 NAU8825_REG_POWER_UP_CONTROL, 1, 0, NULL, 0), 1132 SND_SOC_DAPM_PGA_S("Output Driver L Stage 3", 6, 1133 NAU8825_REG_POWER_UP_CONTROL, 0, 0, NULL, 0), 1134 1135 SND_SOC_DAPM_PGA_S("Output DACL", 7, 1136 NAU8825_REG_CHARGE_PUMP, 8, 1, nau8825_output_dac_event, 1137 SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD), 1138 SND_SOC_DAPM_PGA_S("Output DACR", 7, 1139 NAU8825_REG_CHARGE_PUMP, 9, 1, nau8825_output_dac_event, 1140 SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD), 1141 1142 /* HPOL/R are ungrounded by disabling 16 Ohm pull-downs on playback */ 1143 SND_SOC_DAPM_PGA_S("HPOL Pulldown", 8, 1144 NAU8825_REG_HSD_CTRL, 0, 1, NULL, 0), 1145 SND_SOC_DAPM_PGA_S("HPOR Pulldown", 8, 1146 NAU8825_REG_HSD_CTRL, 1, 1, NULL, 0), 1147 1148 /* High current HPOL/R boost driver */ 1149 SND_SOC_DAPM_PGA_S("HP Boost Driver", 9, 1150 NAU8825_REG_BOOST, 9, 1, NULL, 0), 1151 1152 /* Class G operation control*/ 1153 SND_SOC_DAPM_PGA_S("Class G", 10, 1154 NAU8825_REG_CLASSG_CTRL, 0, 0, NULL, 0), 1155 1156 SND_SOC_DAPM_OUTPUT("HPOL"), 1157 SND_SOC_DAPM_OUTPUT("HPOR"), 1158 }; 1159 1160 static const struct snd_soc_dapm_route nau8825_dapm_routes[] = { 1161 {"Frontend PGA", NULL, "MIC"}, 1162 {"ADC", NULL, "Frontend PGA"}, 1163 {"ADC", NULL, "ADC Clock"}, 1164 {"ADC", NULL, "ADC Power"}, 1165 {"AIFTX", NULL, "ADC"}, 1166 1167 {"DDACL", NULL, "Playback"}, 1168 {"DDACR", NULL, "Playback"}, 1169 {"DDACL", NULL, "DDAC Clock"}, 1170 {"DDACR", NULL, "DDAC Clock"}, 1171 {"DACL Mux", "DACL", "DDACL"}, 1172 {"DACL Mux", "DACR", "DDACR"}, 1173 {"DACR Mux", "DACL", "DDACL"}, 1174 {"DACR Mux", "DACR", "DDACR"}, 1175 {"HP amp L", NULL, "DACL Mux"}, 1176 {"HP amp R", NULL, "DACR Mux"}, 1177 {"Charge Pump", NULL, "HP amp L"}, 1178 {"Charge Pump", NULL, "HP amp R"}, 1179 {"ADACL", NULL, "Charge Pump"}, 1180 {"ADACR", NULL, "Charge Pump"}, 1181 {"ADACL Clock", NULL, "ADACL"}, 1182 {"ADACR Clock", NULL, "ADACR"}, 1183 {"Output Driver L Stage 1", NULL, "ADACL Clock"}, 1184 {"Output Driver R Stage 1", NULL, "ADACR Clock"}, 1185 {"Output Driver L Stage 2", NULL, "Output Driver L Stage 1"}, 1186 {"Output Driver R Stage 2", NULL, "Output Driver R Stage 1"}, 1187 {"Output Driver L Stage 3", NULL, "Output Driver L Stage 2"}, 1188 {"Output Driver R Stage 3", NULL, "Output Driver R Stage 2"}, 1189 {"Output DACL", NULL, "Output Driver L Stage 3"}, 1190 {"Output DACR", NULL, "Output Driver R Stage 3"}, 1191 {"HPOL Pulldown", NULL, "Output DACL"}, 1192 {"HPOR Pulldown", NULL, "Output DACR"}, 1193 {"HP Boost Driver", NULL, "HPOL Pulldown"}, 1194 {"HP Boost Driver", NULL, "HPOR Pulldown"}, 1195 {"Class G", NULL, "HP Boost Driver"}, 1196 {"HPOL", NULL, "Class G"}, 1197 {"HPOR", NULL, "Class G"}, 1198 }; 1199 1200 static int nau8825_hw_params(struct snd_pcm_substream *substream, 1201 struct snd_pcm_hw_params *params, 1202 struct snd_soc_dai *dai) 1203 { 1204 struct snd_soc_codec *codec = dai->codec; 1205 struct nau8825 *nau8825 = snd_soc_codec_get_drvdata(codec); 1206 unsigned int val_len = 0; 1207 1208 switch (params_width(params)) { 1209 case 16: 1210 val_len |= NAU8825_I2S_DL_16; 1211 break; 1212 case 20: 1213 val_len |= NAU8825_I2S_DL_20; 1214 break; 1215 case 24: 1216 val_len |= NAU8825_I2S_DL_24; 1217 break; 1218 case 32: 1219 val_len |= NAU8825_I2S_DL_32; 1220 break; 1221 default: 1222 return -EINVAL; 1223 } 1224 1225 regmap_update_bits(nau8825->regmap, NAU8825_REG_I2S_PCM_CTRL1, 1226 NAU8825_I2S_DL_MASK, val_len); 1227 1228 return 0; 1229 } 1230 1231 static int nau8825_set_dai_fmt(struct snd_soc_dai *codec_dai, unsigned int fmt) 1232 { 1233 struct snd_soc_codec *codec = codec_dai->codec; 1234 struct nau8825 *nau8825 = snd_soc_codec_get_drvdata(codec); 1235 unsigned int ctrl1_val = 0, ctrl2_val = 0; 1236 1237 switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { 1238 case SND_SOC_DAIFMT_CBM_CFM: 1239 ctrl2_val |= NAU8825_I2S_MS_MASTER; 1240 break; 1241 case SND_SOC_DAIFMT_CBS_CFS: 1242 break; 1243 default: 1244 return -EINVAL; 1245 } 1246 1247 switch (fmt & SND_SOC_DAIFMT_INV_MASK) { 1248 case SND_SOC_DAIFMT_NB_NF: 1249 break; 1250 case SND_SOC_DAIFMT_IB_NF: 1251 ctrl1_val |= NAU8825_I2S_BP_INV; 1252 break; 1253 default: 1254 return -EINVAL; 1255 } 1256 1257 switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { 1258 case SND_SOC_DAIFMT_I2S: 1259 ctrl1_val |= NAU8825_I2S_DF_I2S; 1260 break; 1261 case SND_SOC_DAIFMT_LEFT_J: 1262 ctrl1_val |= NAU8825_I2S_DF_LEFT; 1263 break; 1264 case SND_SOC_DAIFMT_RIGHT_J: 1265 ctrl1_val |= NAU8825_I2S_DF_RIGTH; 1266 break; 1267 case SND_SOC_DAIFMT_DSP_A: 1268 ctrl1_val |= NAU8825_I2S_DF_PCM_AB; 1269 break; 1270 case SND_SOC_DAIFMT_DSP_B: 1271 ctrl1_val |= NAU8825_I2S_DF_PCM_AB; 1272 ctrl1_val |= NAU8825_I2S_PCMB_EN; 1273 break; 1274 default: 1275 return -EINVAL; 1276 } 1277 1278 regmap_update_bits(nau8825->regmap, NAU8825_REG_I2S_PCM_CTRL1, 1279 NAU8825_I2S_DL_MASK | NAU8825_I2S_DF_MASK | 1280 NAU8825_I2S_BP_MASK | NAU8825_I2S_PCMB_MASK, 1281 ctrl1_val); 1282 regmap_update_bits(nau8825->regmap, NAU8825_REG_I2S_PCM_CTRL2, 1283 NAU8825_I2S_MS_MASK, ctrl2_val); 1284 1285 return 0; 1286 } 1287 1288 static const struct snd_soc_dai_ops nau8825_dai_ops = { 1289 .hw_params = nau8825_hw_params, 1290 .set_fmt = nau8825_set_dai_fmt, 1291 }; 1292 1293 #define NAU8825_RATES SNDRV_PCM_RATE_8000_192000 1294 #define NAU8825_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE \ 1295 | SNDRV_PCM_FMTBIT_S24_3LE | SNDRV_PCM_FMTBIT_S32_LE) 1296 1297 static struct snd_soc_dai_driver nau8825_dai = { 1298 .name = "nau8825-hifi", 1299 .playback = { 1300 .stream_name = "Playback", 1301 .channels_min = 1, 1302 .channels_max = 2, 1303 .rates = NAU8825_RATES, 1304 .formats = NAU8825_FORMATS, 1305 }, 1306 .capture = { 1307 .stream_name = "Capture", 1308 .channels_min = 1, 1309 .channels_max = 1, 1310 .rates = NAU8825_RATES, 1311 .formats = NAU8825_FORMATS, 1312 }, 1313 .ops = &nau8825_dai_ops, 1314 }; 1315 1316 /** 1317 * nau8825_enable_jack_detect - Specify a jack for event reporting 1318 * 1319 * @component: component to register the jack with 1320 * @jack: jack to use to report headset and button events on 1321 * 1322 * After this function has been called the headset insert/remove and button 1323 * events will be routed to the given jack. Jack can be null to stop 1324 * reporting. 1325 */ 1326 int nau8825_enable_jack_detect(struct snd_soc_codec *codec, 1327 struct snd_soc_jack *jack) 1328 { 1329 struct nau8825 *nau8825 = snd_soc_codec_get_drvdata(codec); 1330 struct regmap *regmap = nau8825->regmap; 1331 1332 nau8825->jack = jack; 1333 1334 /* Ground HP Outputs[1:0], needed for headset auto detection 1335 * Enable Automatic Mic/Gnd switching reading on insert interrupt[6] 1336 */ 1337 regmap_update_bits(regmap, NAU8825_REG_HSD_CTRL, 1338 NAU8825_HSD_AUTO_MODE | NAU8825_SPKR_DWN1R | NAU8825_SPKR_DWN1L, 1339 NAU8825_HSD_AUTO_MODE | NAU8825_SPKR_DWN1R | NAU8825_SPKR_DWN1L); 1340 1341 return 0; 1342 } 1343 EXPORT_SYMBOL_GPL(nau8825_enable_jack_detect); 1344 1345 1346 static bool nau8825_is_jack_inserted(struct regmap *regmap) 1347 { 1348 bool active_high, is_high; 1349 int status, jkdet; 1350 1351 regmap_read(regmap, NAU8825_REG_JACK_DET_CTRL, &jkdet); 1352 active_high = jkdet & NAU8825_JACK_POLARITY; 1353 regmap_read(regmap, NAU8825_REG_I2C_DEVICE_ID, &status); 1354 is_high = status & NAU8825_GPIO2JD1; 1355 /* return jack connection status according to jack insertion logic 1356 * active high or active low. 1357 */ 1358 return active_high == is_high; 1359 } 1360 1361 static void nau8825_restart_jack_detection(struct regmap *regmap) 1362 { 1363 /* this will restart the entire jack detection process including MIC/GND 1364 * switching and create interrupts. We have to go from 0 to 1 and back 1365 * to 0 to restart. 1366 */ 1367 regmap_update_bits(regmap, NAU8825_REG_JACK_DET_CTRL, 1368 NAU8825_JACK_DET_RESTART, NAU8825_JACK_DET_RESTART); 1369 regmap_update_bits(regmap, NAU8825_REG_JACK_DET_CTRL, 1370 NAU8825_JACK_DET_RESTART, 0); 1371 } 1372 1373 static void nau8825_int_status_clear_all(struct regmap *regmap) 1374 { 1375 int active_irq, clear_irq, i; 1376 1377 /* Reset the intrruption status from rightmost bit if the corres- 1378 * ponding irq event occurs. 1379 */ 1380 regmap_read(regmap, NAU8825_REG_IRQ_STATUS, &active_irq); 1381 for (i = 0; i < NAU8825_REG_DATA_LEN; i++) { 1382 clear_irq = (0x1 << i); 1383 if (active_irq & clear_irq) 1384 regmap_write(regmap, 1385 NAU8825_REG_INT_CLR_KEY_STATUS, clear_irq); 1386 } 1387 } 1388 1389 static void nau8825_eject_jack(struct nau8825 *nau8825) 1390 { 1391 struct snd_soc_dapm_context *dapm = nau8825->dapm; 1392 struct regmap *regmap = nau8825->regmap; 1393 1394 /* Force to cancel the cross talk detection process */ 1395 nau8825_xtalk_cancel(nau8825); 1396 1397 snd_soc_dapm_disable_pin(dapm, "SAR"); 1398 snd_soc_dapm_disable_pin(dapm, "MICBIAS"); 1399 /* Detach 2kOhm Resistors from MICBIAS to MICGND1/2 */ 1400 regmap_update_bits(regmap, NAU8825_REG_MIC_BIAS, 1401 NAU8825_MICBIAS_JKSLV | NAU8825_MICBIAS_JKR2, 0); 1402 /* ground HPL/HPR, MICGRND1/2 */ 1403 regmap_update_bits(regmap, NAU8825_REG_HSD_CTRL, 0xf, 0xf); 1404 1405 snd_soc_dapm_sync(dapm); 1406 1407 /* Clear all interruption status */ 1408 nau8825_int_status_clear_all(regmap); 1409 1410 /* Enable the insertion interruption, disable the ejection inter- 1411 * ruption, and then bypass de-bounce circuit. 1412 */ 1413 regmap_update_bits(regmap, NAU8825_REG_INTERRUPT_DIS_CTRL, 1414 NAU8825_IRQ_EJECT_DIS | NAU8825_IRQ_INSERT_DIS, 1415 NAU8825_IRQ_EJECT_DIS); 1416 regmap_update_bits(regmap, NAU8825_REG_INTERRUPT_MASK, 1417 NAU8825_IRQ_OUTPUT_EN | NAU8825_IRQ_EJECT_EN | 1418 NAU8825_IRQ_HEADSET_COMPLETE_EN | NAU8825_IRQ_INSERT_EN, 1419 NAU8825_IRQ_OUTPUT_EN | NAU8825_IRQ_EJECT_EN | 1420 NAU8825_IRQ_HEADSET_COMPLETE_EN); 1421 regmap_update_bits(regmap, NAU8825_REG_JACK_DET_CTRL, 1422 NAU8825_JACK_DET_DB_BYPASS, NAU8825_JACK_DET_DB_BYPASS); 1423 1424 /* Disable ADC needed for interruptions at audo mode */ 1425 regmap_update_bits(regmap, NAU8825_REG_ENA_CTRL, 1426 NAU8825_ENABLE_ADC, 0); 1427 1428 /* Close clock for jack type detection at manual mode */ 1429 nau8825_configure_sysclk(nau8825, NAU8825_CLK_DIS, 0); 1430 } 1431 1432 /* Enable audo mode interruptions with internal clock. */ 1433 static void nau8825_setup_auto_irq(struct nau8825 *nau8825) 1434 { 1435 struct regmap *regmap = nau8825->regmap; 1436 1437 /* Enable headset jack type detection complete interruption and 1438 * jack ejection interruption. 1439 */ 1440 regmap_update_bits(regmap, NAU8825_REG_INTERRUPT_MASK, 1441 NAU8825_IRQ_HEADSET_COMPLETE_EN | NAU8825_IRQ_EJECT_EN, 0); 1442 1443 /* Enable internal VCO needed for interruptions */ 1444 nau8825_configure_sysclk(nau8825, NAU8825_CLK_INTERNAL, 0); 1445 1446 /* Enable ADC needed for interruptions */ 1447 regmap_update_bits(regmap, NAU8825_REG_ENA_CTRL, 1448 NAU8825_ENABLE_ADC, NAU8825_ENABLE_ADC); 1449 1450 /* Chip needs one FSCLK cycle in order to generate interruptions, 1451 * as we cannot guarantee one will be provided by the system. Turning 1452 * master mode on then off enables us to generate that FSCLK cycle 1453 * with a minimum of contention on the clock bus. 1454 */ 1455 regmap_update_bits(regmap, NAU8825_REG_I2S_PCM_CTRL2, 1456 NAU8825_I2S_MS_MASK, NAU8825_I2S_MS_MASTER); 1457 regmap_update_bits(regmap, NAU8825_REG_I2S_PCM_CTRL2, 1458 NAU8825_I2S_MS_MASK, NAU8825_I2S_MS_SLAVE); 1459 1460 /* Not bypass de-bounce circuit */ 1461 regmap_update_bits(regmap, NAU8825_REG_JACK_DET_CTRL, 1462 NAU8825_JACK_DET_DB_BYPASS, 0); 1463 1464 /* Unmask all interruptions */ 1465 regmap_write(regmap, NAU8825_REG_INTERRUPT_DIS_CTRL, 0); 1466 1467 /* Restart the jack detection process at auto mode */ 1468 nau8825_restart_jack_detection(regmap); 1469 } 1470 1471 static int nau8825_button_decode(int value) 1472 { 1473 int buttons = 0; 1474 1475 /* The chip supports up to 8 buttons, but ALSA defines only 6 buttons */ 1476 if (value & BIT(0)) 1477 buttons |= SND_JACK_BTN_0; 1478 if (value & BIT(1)) 1479 buttons |= SND_JACK_BTN_1; 1480 if (value & BIT(2)) 1481 buttons |= SND_JACK_BTN_2; 1482 if (value & BIT(3)) 1483 buttons |= SND_JACK_BTN_3; 1484 if (value & BIT(4)) 1485 buttons |= SND_JACK_BTN_4; 1486 if (value & BIT(5)) 1487 buttons |= SND_JACK_BTN_5; 1488 1489 return buttons; 1490 } 1491 1492 static int nau8825_jack_insert(struct nau8825 *nau8825) 1493 { 1494 struct regmap *regmap = nau8825->regmap; 1495 struct snd_soc_dapm_context *dapm = nau8825->dapm; 1496 int jack_status_reg, mic_detected; 1497 int type = 0; 1498 1499 regmap_read(regmap, NAU8825_REG_GENERAL_STATUS, &jack_status_reg); 1500 mic_detected = (jack_status_reg >> 10) & 3; 1501 /* The JKSLV and JKR2 all detected in high impedance headset */ 1502 if (mic_detected == 0x3) 1503 nau8825->high_imped = true; 1504 else 1505 nau8825->high_imped = false; 1506 1507 switch (mic_detected) { 1508 case 0: 1509 /* no mic */ 1510 type = SND_JACK_HEADPHONE; 1511 break; 1512 case 1: 1513 dev_dbg(nau8825->dev, "OMTP (micgnd1) mic connected\n"); 1514 type = SND_JACK_HEADSET; 1515 1516 /* Unground MICGND1 */ 1517 regmap_update_bits(regmap, NAU8825_REG_HSD_CTRL, 3 << 2, 1518 1 << 2); 1519 /* Attach 2kOhm Resistor from MICBIAS to MICGND1 */ 1520 regmap_update_bits(regmap, NAU8825_REG_MIC_BIAS, 1521 NAU8825_MICBIAS_JKSLV | NAU8825_MICBIAS_JKR2, 1522 NAU8825_MICBIAS_JKR2); 1523 /* Attach SARADC to MICGND1 */ 1524 regmap_update_bits(regmap, NAU8825_REG_SAR_CTRL, 1525 NAU8825_SAR_INPUT_MASK, 1526 NAU8825_SAR_INPUT_JKR2); 1527 1528 snd_soc_dapm_force_enable_pin(dapm, "MICBIAS"); 1529 snd_soc_dapm_force_enable_pin(dapm, "SAR"); 1530 snd_soc_dapm_sync(dapm); 1531 break; 1532 case 2: 1533 case 3: 1534 dev_dbg(nau8825->dev, "CTIA (micgnd2) mic connected\n"); 1535 type = SND_JACK_HEADSET; 1536 1537 /* Unground MICGND2 */ 1538 regmap_update_bits(regmap, NAU8825_REG_HSD_CTRL, 3 << 2, 1539 2 << 2); 1540 /* Attach 2kOhm Resistor from MICBIAS to MICGND2 */ 1541 regmap_update_bits(regmap, NAU8825_REG_MIC_BIAS, 1542 NAU8825_MICBIAS_JKSLV | NAU8825_MICBIAS_JKR2, 1543 NAU8825_MICBIAS_JKSLV); 1544 /* Attach SARADC to MICGND2 */ 1545 regmap_update_bits(regmap, NAU8825_REG_SAR_CTRL, 1546 NAU8825_SAR_INPUT_MASK, 1547 NAU8825_SAR_INPUT_JKSLV); 1548 1549 snd_soc_dapm_force_enable_pin(dapm, "MICBIAS"); 1550 snd_soc_dapm_force_enable_pin(dapm, "SAR"); 1551 snd_soc_dapm_sync(dapm); 1552 break; 1553 } 1554 1555 /* Leaving HPOL/R grounded after jack insert by default. They will be 1556 * ungrounded as part of the widget power up sequence at the beginning 1557 * of playback to reduce pop. 1558 */ 1559 return type; 1560 } 1561 1562 #define NAU8825_BUTTONS (SND_JACK_BTN_0 | SND_JACK_BTN_1 | \ 1563 SND_JACK_BTN_2 | SND_JACK_BTN_3) 1564 1565 static irqreturn_t nau8825_interrupt(int irq, void *data) 1566 { 1567 struct nau8825 *nau8825 = (struct nau8825 *)data; 1568 struct regmap *regmap = nau8825->regmap; 1569 int active_irq, clear_irq = 0, event = 0, event_mask = 0; 1570 1571 if (regmap_read(regmap, NAU8825_REG_IRQ_STATUS, &active_irq)) { 1572 dev_err(nau8825->dev, "failed to read irq status\n"); 1573 return IRQ_NONE; 1574 } 1575 1576 if ((active_irq & NAU8825_JACK_EJECTION_IRQ_MASK) == 1577 NAU8825_JACK_EJECTION_DETECTED) { 1578 1579 nau8825_eject_jack(nau8825); 1580 event_mask |= SND_JACK_HEADSET; 1581 clear_irq = NAU8825_JACK_EJECTION_IRQ_MASK; 1582 } else if (active_irq & NAU8825_KEY_SHORT_PRESS_IRQ) { 1583 int key_status; 1584 1585 regmap_read(regmap, NAU8825_REG_INT_CLR_KEY_STATUS, 1586 &key_status); 1587 1588 /* upper 8 bits of the register are for short pressed keys, 1589 * lower 8 bits - for long pressed buttons 1590 */ 1591 nau8825->button_pressed = nau8825_button_decode( 1592 key_status >> 8); 1593 1594 event |= nau8825->button_pressed; 1595 event_mask |= NAU8825_BUTTONS; 1596 clear_irq = NAU8825_KEY_SHORT_PRESS_IRQ; 1597 } else if (active_irq & NAU8825_KEY_RELEASE_IRQ) { 1598 event_mask = NAU8825_BUTTONS; 1599 clear_irq = NAU8825_KEY_RELEASE_IRQ; 1600 } else if (active_irq & NAU8825_HEADSET_COMPLETION_IRQ) { 1601 if (nau8825_is_jack_inserted(regmap)) { 1602 event |= nau8825_jack_insert(nau8825); 1603 if (!nau8825->high_imped) { 1604 /* Apply the cross talk suppression in the 1605 * headset without high impedance. 1606 */ 1607 if (!nau8825->xtalk_protect) { 1608 /* Raise protection for cross talk de- 1609 * tection if no protection before. 1610 * The driver has to cancel the pro- 1611 * cess and restore changes if process 1612 * is ongoing when ejection. 1613 */ 1614 nau8825->xtalk_protect = true; 1615 nau8825_sema_acquire(nau8825, 0); 1616 } 1617 /* Startup cross talk detection process */ 1618 nau8825->xtalk_state = NAU8825_XTALK_PREPARE; 1619 schedule_work(&nau8825->xtalk_work); 1620 } else { 1621 /* The cross talk suppression shouldn't apply 1622 * in the headset with high impedance. Thus, 1623 * relieve the protection raised before. 1624 */ 1625 if (nau8825->xtalk_protect) { 1626 nau8825_sema_release(nau8825); 1627 nau8825->xtalk_protect = false; 1628 } 1629 } 1630 } else { 1631 dev_warn(nau8825->dev, "Headset completion IRQ fired but no headset connected\n"); 1632 nau8825_eject_jack(nau8825); 1633 } 1634 1635 event_mask |= SND_JACK_HEADSET; 1636 clear_irq = NAU8825_HEADSET_COMPLETION_IRQ; 1637 /* Record the interruption report event for driver to report 1638 * the event later. The jack report will delay until cross 1639 * talk detection process is done. 1640 */ 1641 if (nau8825->xtalk_state == NAU8825_XTALK_PREPARE) { 1642 nau8825->xtalk_event = event; 1643 nau8825->xtalk_event_mask = event_mask; 1644 } 1645 } else if (active_irq & NAU8825_IMPEDANCE_MEAS_IRQ) { 1646 schedule_work(&nau8825->xtalk_work); 1647 clear_irq = NAU8825_IMPEDANCE_MEAS_IRQ; 1648 } else if ((active_irq & NAU8825_JACK_INSERTION_IRQ_MASK) == 1649 NAU8825_JACK_INSERTION_DETECTED) { 1650 /* One more step to check GPIO status directly. Thus, the 1651 * driver can confirm the real insertion interruption because 1652 * the intrruption at manual mode has bypassed debounce 1653 * circuit which can get rid of unstable status. 1654 */ 1655 if (nau8825_is_jack_inserted(regmap)) { 1656 /* Turn off insertion interruption at manual mode */ 1657 regmap_update_bits(regmap, 1658 NAU8825_REG_INTERRUPT_DIS_CTRL, 1659 NAU8825_IRQ_INSERT_DIS, 1660 NAU8825_IRQ_INSERT_DIS); 1661 regmap_update_bits(regmap, NAU8825_REG_INTERRUPT_MASK, 1662 NAU8825_IRQ_INSERT_EN, NAU8825_IRQ_INSERT_EN); 1663 /* Enable interruption for jack type detection at audo 1664 * mode which can detect microphone and jack type. 1665 */ 1666 nau8825_setup_auto_irq(nau8825); 1667 } 1668 } 1669 1670 if (!clear_irq) 1671 clear_irq = active_irq; 1672 /* clears the rightmost interruption */ 1673 regmap_write(regmap, NAU8825_REG_INT_CLR_KEY_STATUS, clear_irq); 1674 1675 /* Delay jack report until cross talk detection is done. It can avoid 1676 * application to do playback preparation when cross talk detection 1677 * process is still working. Otherwise, the resource like clock and 1678 * power will be issued by them at the same time and conflict happens. 1679 */ 1680 if (event_mask && nau8825->xtalk_state == NAU8825_XTALK_DONE) 1681 snd_soc_jack_report(nau8825->jack, event, event_mask); 1682 1683 return IRQ_HANDLED; 1684 } 1685 1686 static void nau8825_setup_buttons(struct nau8825 *nau8825) 1687 { 1688 struct regmap *regmap = nau8825->regmap; 1689 1690 regmap_update_bits(regmap, NAU8825_REG_SAR_CTRL, 1691 NAU8825_SAR_TRACKING_GAIN_MASK, 1692 nau8825->sar_voltage << NAU8825_SAR_TRACKING_GAIN_SFT); 1693 regmap_update_bits(regmap, NAU8825_REG_SAR_CTRL, 1694 NAU8825_SAR_COMPARE_TIME_MASK, 1695 nau8825->sar_compare_time << NAU8825_SAR_COMPARE_TIME_SFT); 1696 regmap_update_bits(regmap, NAU8825_REG_SAR_CTRL, 1697 NAU8825_SAR_SAMPLING_TIME_MASK, 1698 nau8825->sar_sampling_time << NAU8825_SAR_SAMPLING_TIME_SFT); 1699 1700 regmap_update_bits(regmap, NAU8825_REG_KEYDET_CTRL, 1701 NAU8825_KEYDET_LEVELS_NR_MASK, 1702 (nau8825->sar_threshold_num - 1) << NAU8825_KEYDET_LEVELS_NR_SFT); 1703 regmap_update_bits(regmap, NAU8825_REG_KEYDET_CTRL, 1704 NAU8825_KEYDET_HYSTERESIS_MASK, 1705 nau8825->sar_hysteresis << NAU8825_KEYDET_HYSTERESIS_SFT); 1706 regmap_update_bits(regmap, NAU8825_REG_KEYDET_CTRL, 1707 NAU8825_KEYDET_SHORTKEY_DEBOUNCE_MASK, 1708 nau8825->key_debounce << NAU8825_KEYDET_SHORTKEY_DEBOUNCE_SFT); 1709 1710 regmap_write(regmap, NAU8825_REG_VDET_THRESHOLD_1, 1711 (nau8825->sar_threshold[0] << 8) | nau8825->sar_threshold[1]); 1712 regmap_write(regmap, NAU8825_REG_VDET_THRESHOLD_2, 1713 (nau8825->sar_threshold[2] << 8) | nau8825->sar_threshold[3]); 1714 regmap_write(regmap, NAU8825_REG_VDET_THRESHOLD_3, 1715 (nau8825->sar_threshold[4] << 8) | nau8825->sar_threshold[5]); 1716 regmap_write(regmap, NAU8825_REG_VDET_THRESHOLD_4, 1717 (nau8825->sar_threshold[6] << 8) | nau8825->sar_threshold[7]); 1718 1719 /* Enable short press and release interruptions */ 1720 regmap_update_bits(regmap, NAU8825_REG_INTERRUPT_MASK, 1721 NAU8825_IRQ_KEY_SHORT_PRESS_EN | NAU8825_IRQ_KEY_RELEASE_EN, 1722 0); 1723 } 1724 1725 static void nau8825_init_regs(struct nau8825 *nau8825) 1726 { 1727 struct regmap *regmap = nau8825->regmap; 1728 1729 /* Latch IIC LSB value */ 1730 regmap_write(regmap, NAU8825_REG_IIC_ADDR_SET, 0x0001); 1731 /* Enable Bias/Vmid */ 1732 regmap_update_bits(nau8825->regmap, NAU8825_REG_BIAS_ADJ, 1733 NAU8825_BIAS_VMID, NAU8825_BIAS_VMID); 1734 regmap_update_bits(nau8825->regmap, NAU8825_REG_BOOST, 1735 NAU8825_GLOBAL_BIAS_EN, NAU8825_GLOBAL_BIAS_EN); 1736 1737 /* VMID Tieoff */ 1738 regmap_update_bits(regmap, NAU8825_REG_BIAS_ADJ, 1739 NAU8825_BIAS_VMID_SEL_MASK, 1740 nau8825->vref_impedance << NAU8825_BIAS_VMID_SEL_SFT); 1741 /* Disable Boost Driver, Automatic Short circuit protection enable */ 1742 regmap_update_bits(regmap, NAU8825_REG_BOOST, 1743 NAU8825_PRECHARGE_DIS | NAU8825_HP_BOOST_DIS | 1744 NAU8825_HP_BOOST_G_DIS | NAU8825_SHORT_SHUTDOWN_EN, 1745 NAU8825_PRECHARGE_DIS | NAU8825_HP_BOOST_DIS | 1746 NAU8825_HP_BOOST_G_DIS | NAU8825_SHORT_SHUTDOWN_EN); 1747 1748 regmap_update_bits(regmap, NAU8825_REG_GPIO12_CTRL, 1749 NAU8825_JKDET_OUTPUT_EN, 1750 nau8825->jkdet_enable ? 0 : NAU8825_JKDET_OUTPUT_EN); 1751 regmap_update_bits(regmap, NAU8825_REG_GPIO12_CTRL, 1752 NAU8825_JKDET_PULL_EN, 1753 nau8825->jkdet_pull_enable ? 0 : NAU8825_JKDET_PULL_EN); 1754 regmap_update_bits(regmap, NAU8825_REG_GPIO12_CTRL, 1755 NAU8825_JKDET_PULL_UP, 1756 nau8825->jkdet_pull_up ? NAU8825_JKDET_PULL_UP : 0); 1757 regmap_update_bits(regmap, NAU8825_REG_JACK_DET_CTRL, 1758 NAU8825_JACK_POLARITY, 1759 /* jkdet_polarity - 1 is for active-low */ 1760 nau8825->jkdet_polarity ? 0 : NAU8825_JACK_POLARITY); 1761 1762 regmap_update_bits(regmap, NAU8825_REG_JACK_DET_CTRL, 1763 NAU8825_JACK_INSERT_DEBOUNCE_MASK, 1764 nau8825->jack_insert_debounce << NAU8825_JACK_INSERT_DEBOUNCE_SFT); 1765 regmap_update_bits(regmap, NAU8825_REG_JACK_DET_CTRL, 1766 NAU8825_JACK_EJECT_DEBOUNCE_MASK, 1767 nau8825->jack_eject_debounce << NAU8825_JACK_EJECT_DEBOUNCE_SFT); 1768 1769 /* Mask unneeded IRQs: 1 - disable, 0 - enable */ 1770 regmap_update_bits(regmap, NAU8825_REG_INTERRUPT_MASK, 0x7ff, 0x7ff); 1771 1772 regmap_update_bits(regmap, NAU8825_REG_MIC_BIAS, 1773 NAU8825_MICBIAS_VOLTAGE_MASK, nau8825->micbias_voltage); 1774 1775 if (nau8825->sar_threshold_num) 1776 nau8825_setup_buttons(nau8825); 1777 1778 /* Default oversampling/decimations settings are unusable 1779 * (audible hiss). Set it to something better. 1780 */ 1781 regmap_update_bits(regmap, NAU8825_REG_ADC_RATE, 1782 NAU8825_ADC_SYNC_DOWN_MASK, NAU8825_ADC_SYNC_DOWN_128); 1783 regmap_update_bits(regmap, NAU8825_REG_DAC_CTRL1, 1784 NAU8825_DAC_OVERSAMPLE_MASK, NAU8825_DAC_OVERSAMPLE_128); 1785 /* Disable DACR/L power */ 1786 regmap_update_bits(regmap, NAU8825_REG_CHARGE_PUMP, 1787 NAU8825_POWER_DOWN_DACR | NAU8825_POWER_DOWN_DACL, 1788 NAU8825_POWER_DOWN_DACR | NAU8825_POWER_DOWN_DACL); 1789 /* Enable TESTDAC. This sets the analog DAC inputs to a '0' input 1790 * signal to avoid any glitches due to power up transients in both 1791 * the analog and digital DAC circuit. 1792 */ 1793 regmap_update_bits(nau8825->regmap, NAU8825_REG_BIAS_ADJ, 1794 NAU8825_BIAS_TESTDAC_EN, NAU8825_BIAS_TESTDAC_EN); 1795 /* CICCLP off */ 1796 regmap_update_bits(regmap, NAU8825_REG_DAC_CTRL1, 1797 NAU8825_DAC_CLIP_OFF, NAU8825_DAC_CLIP_OFF); 1798 1799 /* Class AB bias current to 2x, DAC Capacitor enable MSB/LSB */ 1800 regmap_update_bits(regmap, NAU8825_REG_ANALOG_CONTROL_2, 1801 NAU8825_HP_NON_CLASSG_CURRENT_2xADJ | 1802 NAU8825_DAC_CAPACITOR_MSB | NAU8825_DAC_CAPACITOR_LSB, 1803 NAU8825_HP_NON_CLASSG_CURRENT_2xADJ | 1804 NAU8825_DAC_CAPACITOR_MSB | NAU8825_DAC_CAPACITOR_LSB); 1805 /* Class G timer 64ms */ 1806 regmap_update_bits(regmap, NAU8825_REG_CLASSG_CTRL, 1807 NAU8825_CLASSG_TIMER_MASK, 1808 0x20 << NAU8825_CLASSG_TIMER_SFT); 1809 /* DAC clock delay 2ns, VREF */ 1810 regmap_update_bits(regmap, NAU8825_REG_RDAC, 1811 NAU8825_RDAC_CLK_DELAY_MASK | NAU8825_RDAC_VREF_MASK, 1812 (0x2 << NAU8825_RDAC_CLK_DELAY_SFT) | 1813 (0x3 << NAU8825_RDAC_VREF_SFT)); 1814 /* Config L/R channel */ 1815 regmap_update_bits(nau8825->regmap, NAU8825_REG_DACL_CTRL, 1816 NAU8825_DACL_CH_SEL_MASK, NAU8825_DACL_CH_SEL_L); 1817 regmap_update_bits(nau8825->regmap, NAU8825_REG_DACR_CTRL, 1818 NAU8825_DACL_CH_SEL_MASK, NAU8825_DACL_CH_SEL_R); 1819 } 1820 1821 static const struct regmap_config nau8825_regmap_config = { 1822 .val_bits = NAU8825_REG_DATA_LEN, 1823 .reg_bits = NAU8825_REG_ADDR_LEN, 1824 1825 .max_register = NAU8825_REG_MAX, 1826 .readable_reg = nau8825_readable_reg, 1827 .writeable_reg = nau8825_writeable_reg, 1828 .volatile_reg = nau8825_volatile_reg, 1829 1830 .cache_type = REGCACHE_RBTREE, 1831 .reg_defaults = nau8825_reg_defaults, 1832 .num_reg_defaults = ARRAY_SIZE(nau8825_reg_defaults), 1833 }; 1834 1835 static int nau8825_codec_probe(struct snd_soc_codec *codec) 1836 { 1837 struct nau8825 *nau8825 = snd_soc_codec_get_drvdata(codec); 1838 struct snd_soc_dapm_context *dapm = snd_soc_codec_get_dapm(codec); 1839 1840 nau8825->dapm = dapm; 1841 1842 return 0; 1843 } 1844 1845 static int nau8825_codec_remove(struct snd_soc_codec *codec) 1846 { 1847 struct nau8825 *nau8825 = snd_soc_codec_get_drvdata(codec); 1848 1849 /* Cancel and reset cross tak suppresstion detection funciton */ 1850 nau8825_xtalk_cancel(nau8825); 1851 1852 return 0; 1853 } 1854 1855 /** 1856 * nau8825_calc_fll_param - Calculate FLL parameters. 1857 * @fll_in: external clock provided to codec. 1858 * @fs: sampling rate. 1859 * @fll_param: Pointer to structure of FLL parameters. 1860 * 1861 * Calculate FLL parameters to configure codec. 1862 * 1863 * Returns 0 for success or negative error code. 1864 */ 1865 static int nau8825_calc_fll_param(unsigned int fll_in, unsigned int fs, 1866 struct nau8825_fll *fll_param) 1867 { 1868 u64 fvco, fvco_max; 1869 unsigned int fref, i, fvco_sel; 1870 1871 /* Ensure the reference clock frequency (FREF) is <= 13.5MHz by dividing 1872 * freq_in by 1, 2, 4, or 8 using FLL pre-scalar. 1873 * FREF = freq_in / NAU8825_FLL_REF_DIV_MASK 1874 */ 1875 for (i = 0; i < ARRAY_SIZE(fll_pre_scalar); i++) { 1876 fref = fll_in / fll_pre_scalar[i].param; 1877 if (fref <= NAU_FREF_MAX) 1878 break; 1879 } 1880 if (i == ARRAY_SIZE(fll_pre_scalar)) 1881 return -EINVAL; 1882 fll_param->clk_ref_div = fll_pre_scalar[i].val; 1883 1884 /* Choose the FLL ratio based on FREF */ 1885 for (i = 0; i < ARRAY_SIZE(fll_ratio); i++) { 1886 if (fref >= fll_ratio[i].param) 1887 break; 1888 } 1889 if (i == ARRAY_SIZE(fll_ratio)) 1890 return -EINVAL; 1891 fll_param->ratio = fll_ratio[i].val; 1892 1893 /* Calculate the frequency of DCO (FDCO) given freq_out = 256 * Fs. 1894 * FDCO must be within the 90MHz - 124MHz or the FFL cannot be 1895 * guaranteed across the full range of operation. 1896 * FDCO = freq_out * 2 * mclk_src_scaling 1897 */ 1898 fvco_max = 0; 1899 fvco_sel = ARRAY_SIZE(mclk_src_scaling); 1900 for (i = 0; i < ARRAY_SIZE(mclk_src_scaling); i++) { 1901 fvco = 256 * fs * 2 * mclk_src_scaling[i].param; 1902 if (fvco > NAU_FVCO_MIN && fvco < NAU_FVCO_MAX && 1903 fvco_max < fvco) { 1904 fvco_max = fvco; 1905 fvco_sel = i; 1906 } 1907 } 1908 if (ARRAY_SIZE(mclk_src_scaling) == fvco_sel) 1909 return -EINVAL; 1910 fll_param->mclk_src = mclk_src_scaling[fvco_sel].val; 1911 1912 /* Calculate the FLL 10-bit integer input and the FLL 16-bit fractional 1913 * input based on FDCO, FREF and FLL ratio. 1914 */ 1915 fvco = div_u64(fvco << 16, fref * fll_param->ratio); 1916 fll_param->fll_int = (fvco >> 16) & 0x3FF; 1917 fll_param->fll_frac = fvco & 0xFFFF; 1918 return 0; 1919 } 1920 1921 static void nau8825_fll_apply(struct nau8825 *nau8825, 1922 struct nau8825_fll *fll_param) 1923 { 1924 regmap_update_bits(nau8825->regmap, NAU8825_REG_CLK_DIVIDER, 1925 NAU8825_CLK_SRC_MASK | NAU8825_CLK_MCLK_SRC_MASK, 1926 NAU8825_CLK_SRC_MCLK | fll_param->mclk_src); 1927 regmap_update_bits(nau8825->regmap, NAU8825_REG_FLL1, 1928 NAU8825_FLL_RATIO_MASK, fll_param->ratio); 1929 /* FLL 16-bit fractional input */ 1930 regmap_write(nau8825->regmap, NAU8825_REG_FLL2, fll_param->fll_frac); 1931 /* FLL 10-bit integer input */ 1932 regmap_update_bits(nau8825->regmap, NAU8825_REG_FLL3, 1933 NAU8825_FLL_INTEGER_MASK, fll_param->fll_int); 1934 /* FLL pre-scaler */ 1935 regmap_update_bits(nau8825->regmap, NAU8825_REG_FLL4, 1936 NAU8825_FLL_REF_DIV_MASK, fll_param->clk_ref_div); 1937 /* select divided VCO input */ 1938 regmap_update_bits(nau8825->regmap, NAU8825_REG_FLL5, 1939 NAU8825_FLL_CLK_SW_MASK, NAU8825_FLL_CLK_SW_REF); 1940 /* Disable free-running mode */ 1941 regmap_update_bits(nau8825->regmap, 1942 NAU8825_REG_FLL6, NAU8825_DCO_EN, 0); 1943 if (fll_param->fll_frac) { 1944 regmap_update_bits(nau8825->regmap, NAU8825_REG_FLL5, 1945 NAU8825_FLL_PDB_DAC_EN | NAU8825_FLL_LOOP_FTR_EN | 1946 NAU8825_FLL_FTR_SW_MASK, 1947 NAU8825_FLL_PDB_DAC_EN | NAU8825_FLL_LOOP_FTR_EN | 1948 NAU8825_FLL_FTR_SW_FILTER); 1949 regmap_update_bits(nau8825->regmap, NAU8825_REG_FLL6, 1950 NAU8825_SDM_EN, NAU8825_SDM_EN); 1951 } else { 1952 regmap_update_bits(nau8825->regmap, NAU8825_REG_FLL5, 1953 NAU8825_FLL_PDB_DAC_EN | NAU8825_FLL_LOOP_FTR_EN | 1954 NAU8825_FLL_FTR_SW_MASK, NAU8825_FLL_FTR_SW_ACCU); 1955 regmap_update_bits(nau8825->regmap, 1956 NAU8825_REG_FLL6, NAU8825_SDM_EN, 0); 1957 } 1958 } 1959 1960 /* freq_out must be 256*Fs in order to achieve the best performance */ 1961 static int nau8825_set_pll(struct snd_soc_codec *codec, int pll_id, int source, 1962 unsigned int freq_in, unsigned int freq_out) 1963 { 1964 struct nau8825 *nau8825 = snd_soc_codec_get_drvdata(codec); 1965 struct nau8825_fll fll_param; 1966 int ret, fs; 1967 1968 fs = freq_out / 256; 1969 ret = nau8825_calc_fll_param(freq_in, fs, &fll_param); 1970 if (ret < 0) { 1971 dev_err(codec->dev, "Unsupported input clock %d\n", freq_in); 1972 return ret; 1973 } 1974 dev_dbg(codec->dev, "mclk_src=%x ratio=%x fll_frac=%x fll_int=%x clk_ref_div=%x\n", 1975 fll_param.mclk_src, fll_param.ratio, fll_param.fll_frac, 1976 fll_param.fll_int, fll_param.clk_ref_div); 1977 1978 nau8825_fll_apply(nau8825, &fll_param); 1979 mdelay(2); 1980 regmap_update_bits(nau8825->regmap, NAU8825_REG_CLK_DIVIDER, 1981 NAU8825_CLK_SRC_MASK, NAU8825_CLK_SRC_VCO); 1982 return 0; 1983 } 1984 1985 static int nau8825_mclk_prepare(struct nau8825 *nau8825, unsigned int freq) 1986 { 1987 int ret = 0; 1988 1989 nau8825->mclk = devm_clk_get(nau8825->dev, "mclk"); 1990 if (IS_ERR(nau8825->mclk)) { 1991 dev_info(nau8825->dev, "No 'mclk' clock found, assume MCLK is managed externally"); 1992 return 0; 1993 } 1994 1995 if (!nau8825->mclk_freq) { 1996 ret = clk_prepare_enable(nau8825->mclk); 1997 if (ret) { 1998 dev_err(nau8825->dev, "Unable to prepare codec mclk\n"); 1999 return ret; 2000 } 2001 } 2002 2003 if (nau8825->mclk_freq != freq) { 2004 freq = clk_round_rate(nau8825->mclk, freq); 2005 ret = clk_set_rate(nau8825->mclk, freq); 2006 if (ret) { 2007 dev_err(nau8825->dev, "Unable to set mclk rate\n"); 2008 return ret; 2009 } 2010 nau8825->mclk_freq = freq; 2011 } 2012 2013 return 0; 2014 } 2015 2016 static void nau8825_configure_mclk_as_sysclk(struct regmap *regmap) 2017 { 2018 regmap_update_bits(regmap, NAU8825_REG_CLK_DIVIDER, 2019 NAU8825_CLK_SRC_MASK, NAU8825_CLK_SRC_MCLK); 2020 regmap_update_bits(regmap, NAU8825_REG_FLL6, 2021 NAU8825_DCO_EN, 0); 2022 } 2023 2024 static int nau8825_configure_sysclk(struct nau8825 *nau8825, int clk_id, 2025 unsigned int freq) 2026 { 2027 struct regmap *regmap = nau8825->regmap; 2028 int ret; 2029 2030 switch (clk_id) { 2031 case NAU8825_CLK_DIS: 2032 /* Clock provided externally and disable internal VCO clock */ 2033 nau8825_configure_mclk_as_sysclk(regmap); 2034 if (nau8825->mclk_freq) { 2035 clk_disable_unprepare(nau8825->mclk); 2036 nau8825->mclk_freq = 0; 2037 } 2038 2039 break; 2040 case NAU8825_CLK_MCLK: 2041 /* Acquire the semaphone to synchronize the playback and 2042 * interrupt handler. In order to avoid the playback inter- 2043 * fered by cross talk process, the driver make the playback 2044 * preparation halted until cross talk process finish. 2045 */ 2046 nau8825_sema_acquire(nau8825, 2 * HZ); 2047 nau8825_configure_mclk_as_sysclk(regmap); 2048 /* MCLK not changed by clock tree */ 2049 regmap_update_bits(regmap, NAU8825_REG_CLK_DIVIDER, 2050 NAU8825_CLK_MCLK_SRC_MASK, 0); 2051 /* Release the semaphone. */ 2052 nau8825_sema_release(nau8825); 2053 2054 ret = nau8825_mclk_prepare(nau8825, freq); 2055 if (ret) 2056 return ret; 2057 2058 break; 2059 case NAU8825_CLK_INTERNAL: 2060 if (nau8825_is_jack_inserted(nau8825->regmap)) { 2061 regmap_update_bits(regmap, NAU8825_REG_FLL6, 2062 NAU8825_DCO_EN, NAU8825_DCO_EN); 2063 regmap_update_bits(regmap, NAU8825_REG_CLK_DIVIDER, 2064 NAU8825_CLK_SRC_MASK, NAU8825_CLK_SRC_VCO); 2065 /* Decrease the VCO frequency for power saving */ 2066 regmap_update_bits(regmap, NAU8825_REG_CLK_DIVIDER, 2067 NAU8825_CLK_MCLK_SRC_MASK, 0xf); 2068 regmap_update_bits(regmap, NAU8825_REG_FLL1, 2069 NAU8825_FLL_RATIO_MASK, 0x10); 2070 regmap_update_bits(regmap, NAU8825_REG_FLL6, 2071 NAU8825_SDM_EN, NAU8825_SDM_EN); 2072 } else { 2073 /* The clock turns off intentionally for power saving 2074 * when no headset connected. 2075 */ 2076 nau8825_configure_mclk_as_sysclk(regmap); 2077 dev_warn(nau8825->dev, "Disable clock for power saving when no headset connected\n"); 2078 } 2079 if (nau8825->mclk_freq) { 2080 clk_disable_unprepare(nau8825->mclk); 2081 nau8825->mclk_freq = 0; 2082 } 2083 2084 break; 2085 case NAU8825_CLK_FLL_MCLK: 2086 /* Acquire the semaphone to synchronize the playback and 2087 * interrupt handler. In order to avoid the playback inter- 2088 * fered by cross talk process, the driver make the playback 2089 * preparation halted until cross talk process finish. 2090 */ 2091 nau8825_sema_acquire(nau8825, 2 * HZ); 2092 regmap_update_bits(regmap, NAU8825_REG_FLL3, 2093 NAU8825_FLL_CLK_SRC_MASK, NAU8825_FLL_CLK_SRC_MCLK); 2094 /* Release the semaphone. */ 2095 nau8825_sema_release(nau8825); 2096 2097 ret = nau8825_mclk_prepare(nau8825, freq); 2098 if (ret) 2099 return ret; 2100 2101 break; 2102 case NAU8825_CLK_FLL_BLK: 2103 /* Acquire the semaphone to synchronize the playback and 2104 * interrupt handler. In order to avoid the playback inter- 2105 * fered by cross talk process, the driver make the playback 2106 * preparation halted until cross talk process finish. 2107 */ 2108 nau8825_sema_acquire(nau8825, 2 * HZ); 2109 regmap_update_bits(regmap, NAU8825_REG_FLL3, 2110 NAU8825_FLL_CLK_SRC_MASK, NAU8825_FLL_CLK_SRC_BLK); 2111 /* Release the semaphone. */ 2112 nau8825_sema_release(nau8825); 2113 2114 if (nau8825->mclk_freq) { 2115 clk_disable_unprepare(nau8825->mclk); 2116 nau8825->mclk_freq = 0; 2117 } 2118 2119 break; 2120 case NAU8825_CLK_FLL_FS: 2121 /* Acquire the semaphone to synchronize the playback and 2122 * interrupt handler. In order to avoid the playback inter- 2123 * fered by cross talk process, the driver make the playback 2124 * preparation halted until cross talk process finish. 2125 */ 2126 nau8825_sema_acquire(nau8825, 2 * HZ); 2127 regmap_update_bits(regmap, NAU8825_REG_FLL3, 2128 NAU8825_FLL_CLK_SRC_MASK, NAU8825_FLL_CLK_SRC_FS); 2129 /* Release the semaphone. */ 2130 nau8825_sema_release(nau8825); 2131 2132 if (nau8825->mclk_freq) { 2133 clk_disable_unprepare(nau8825->mclk); 2134 nau8825->mclk_freq = 0; 2135 } 2136 2137 break; 2138 default: 2139 dev_err(nau8825->dev, "Invalid clock id (%d)\n", clk_id); 2140 return -EINVAL; 2141 } 2142 2143 dev_dbg(nau8825->dev, "Sysclk is %dHz and clock id is %d\n", freq, 2144 clk_id); 2145 return 0; 2146 } 2147 2148 static int nau8825_set_sysclk(struct snd_soc_codec *codec, int clk_id, 2149 int source, unsigned int freq, int dir) 2150 { 2151 struct nau8825 *nau8825 = snd_soc_codec_get_drvdata(codec); 2152 2153 return nau8825_configure_sysclk(nau8825, clk_id, freq); 2154 } 2155 2156 static int nau8825_resume_setup(struct nau8825 *nau8825) 2157 { 2158 struct regmap *regmap = nau8825->regmap; 2159 2160 /* Close clock when jack type detection at manual mode */ 2161 nau8825_configure_sysclk(nau8825, NAU8825_CLK_DIS, 0); 2162 2163 /* Clear all interruption status */ 2164 nau8825_int_status_clear_all(regmap); 2165 2166 /* Enable both insertion and ejection interruptions, and then 2167 * bypass de-bounce circuit. 2168 */ 2169 regmap_update_bits(regmap, NAU8825_REG_INTERRUPT_MASK, 2170 NAU8825_IRQ_OUTPUT_EN | NAU8825_IRQ_HEADSET_COMPLETE_EN | 2171 NAU8825_IRQ_EJECT_EN | NAU8825_IRQ_INSERT_EN, 2172 NAU8825_IRQ_OUTPUT_EN | NAU8825_IRQ_HEADSET_COMPLETE_EN); 2173 regmap_update_bits(regmap, NAU8825_REG_JACK_DET_CTRL, 2174 NAU8825_JACK_DET_DB_BYPASS, NAU8825_JACK_DET_DB_BYPASS); 2175 regmap_update_bits(regmap, NAU8825_REG_INTERRUPT_DIS_CTRL, 2176 NAU8825_IRQ_INSERT_DIS | NAU8825_IRQ_EJECT_DIS, 0); 2177 2178 return 0; 2179 } 2180 2181 static int nau8825_set_bias_level(struct snd_soc_codec *codec, 2182 enum snd_soc_bias_level level) 2183 { 2184 struct nau8825 *nau8825 = snd_soc_codec_get_drvdata(codec); 2185 int ret; 2186 2187 switch (level) { 2188 case SND_SOC_BIAS_ON: 2189 break; 2190 2191 case SND_SOC_BIAS_PREPARE: 2192 break; 2193 2194 case SND_SOC_BIAS_STANDBY: 2195 if (snd_soc_codec_get_bias_level(codec) == SND_SOC_BIAS_OFF) { 2196 if (nau8825->mclk_freq) { 2197 ret = clk_prepare_enable(nau8825->mclk); 2198 if (ret) { 2199 dev_err(nau8825->dev, "Unable to prepare codec mclk\n"); 2200 return ret; 2201 } 2202 } 2203 /* Setup codec configuration after resume */ 2204 nau8825_resume_setup(nau8825); 2205 } 2206 break; 2207 2208 case SND_SOC_BIAS_OFF: 2209 /* Cancel and reset cross talk detection funciton */ 2210 nau8825_xtalk_cancel(nau8825); 2211 /* Turn off all interruptions before system shutdown. Keep the 2212 * interruption quiet before resume setup completes. 2213 */ 2214 regmap_write(nau8825->regmap, 2215 NAU8825_REG_INTERRUPT_DIS_CTRL, 0xffff); 2216 /* Disable ADC needed for interruptions at audo mode */ 2217 regmap_update_bits(nau8825->regmap, NAU8825_REG_ENA_CTRL, 2218 NAU8825_ENABLE_ADC, 0); 2219 if (nau8825->mclk_freq) 2220 clk_disable_unprepare(nau8825->mclk); 2221 break; 2222 } 2223 return 0; 2224 } 2225 2226 static int __maybe_unused nau8825_suspend(struct snd_soc_codec *codec) 2227 { 2228 struct nau8825 *nau8825 = snd_soc_codec_get_drvdata(codec); 2229 2230 disable_irq(nau8825->irq); 2231 snd_soc_codec_force_bias_level(codec, SND_SOC_BIAS_OFF); 2232 regcache_cache_only(nau8825->regmap, true); 2233 regcache_mark_dirty(nau8825->regmap); 2234 2235 return 0; 2236 } 2237 2238 static int __maybe_unused nau8825_resume(struct snd_soc_codec *codec) 2239 { 2240 struct nau8825 *nau8825 = snd_soc_codec_get_drvdata(codec); 2241 2242 regcache_cache_only(nau8825->regmap, false); 2243 regcache_sync(nau8825->regmap); 2244 if (nau8825_is_jack_inserted(nau8825->regmap)) { 2245 /* If the jack is inserted, we need to check whether the play- 2246 * back is active before suspend. If active, the driver has to 2247 * raise the protection for cross talk function to avoid the 2248 * playback recovers before cross talk process finish. Other- 2249 * wise, the playback will be interfered by cross talk func- 2250 * tion. It is better to apply hardware related parameters 2251 * before starting playback or record. 2252 */ 2253 if (nau8825_dai_is_active(nau8825)) { 2254 nau8825->xtalk_protect = true; 2255 nau8825_sema_acquire(nau8825, 0); 2256 } 2257 } 2258 enable_irq(nau8825->irq); 2259 2260 return 0; 2261 } 2262 2263 static struct snd_soc_codec_driver nau8825_codec_driver = { 2264 .probe = nau8825_codec_probe, 2265 .remove = nau8825_codec_remove, 2266 .set_sysclk = nau8825_set_sysclk, 2267 .set_pll = nau8825_set_pll, 2268 .set_bias_level = nau8825_set_bias_level, 2269 .suspend_bias_off = true, 2270 .suspend = nau8825_suspend, 2271 .resume = nau8825_resume, 2272 2273 .controls = nau8825_controls, 2274 .num_controls = ARRAY_SIZE(nau8825_controls), 2275 .dapm_widgets = nau8825_dapm_widgets, 2276 .num_dapm_widgets = ARRAY_SIZE(nau8825_dapm_widgets), 2277 .dapm_routes = nau8825_dapm_routes, 2278 .num_dapm_routes = ARRAY_SIZE(nau8825_dapm_routes), 2279 }; 2280 2281 static void nau8825_reset_chip(struct regmap *regmap) 2282 { 2283 regmap_write(regmap, NAU8825_REG_RESET, 0x00); 2284 regmap_write(regmap, NAU8825_REG_RESET, 0x00); 2285 } 2286 2287 static void nau8825_print_device_properties(struct nau8825 *nau8825) 2288 { 2289 int i; 2290 struct device *dev = nau8825->dev; 2291 2292 dev_dbg(dev, "jkdet-enable: %d\n", nau8825->jkdet_enable); 2293 dev_dbg(dev, "jkdet-pull-enable: %d\n", nau8825->jkdet_pull_enable); 2294 dev_dbg(dev, "jkdet-pull-up: %d\n", nau8825->jkdet_pull_up); 2295 dev_dbg(dev, "jkdet-polarity: %d\n", nau8825->jkdet_polarity); 2296 dev_dbg(dev, "micbias-voltage: %d\n", nau8825->micbias_voltage); 2297 dev_dbg(dev, "vref-impedance: %d\n", nau8825->vref_impedance); 2298 2299 dev_dbg(dev, "sar-threshold-num: %d\n", nau8825->sar_threshold_num); 2300 for (i = 0; i < nau8825->sar_threshold_num; i++) 2301 dev_dbg(dev, "sar-threshold[%d]=%d\n", i, 2302 nau8825->sar_threshold[i]); 2303 2304 dev_dbg(dev, "sar-hysteresis: %d\n", nau8825->sar_hysteresis); 2305 dev_dbg(dev, "sar-voltage: %d\n", nau8825->sar_voltage); 2306 dev_dbg(dev, "sar-compare-time: %d\n", nau8825->sar_compare_time); 2307 dev_dbg(dev, "sar-sampling-time: %d\n", nau8825->sar_sampling_time); 2308 dev_dbg(dev, "short-key-debounce: %d\n", nau8825->key_debounce); 2309 dev_dbg(dev, "jack-insert-debounce: %d\n", 2310 nau8825->jack_insert_debounce); 2311 dev_dbg(dev, "jack-eject-debounce: %d\n", 2312 nau8825->jack_eject_debounce); 2313 } 2314 2315 static int nau8825_read_device_properties(struct device *dev, 2316 struct nau8825 *nau8825) { 2317 2318 nau8825->jkdet_enable = device_property_read_bool(dev, 2319 "nuvoton,jkdet-enable"); 2320 nau8825->jkdet_pull_enable = device_property_read_bool(dev, 2321 "nuvoton,jkdet-pull-enable"); 2322 nau8825->jkdet_pull_up = device_property_read_bool(dev, 2323 "nuvoton,jkdet-pull-up"); 2324 device_property_read_u32(dev, "nuvoton,jkdet-polarity", 2325 &nau8825->jkdet_polarity); 2326 device_property_read_u32(dev, "nuvoton,micbias-voltage", 2327 &nau8825->micbias_voltage); 2328 device_property_read_u32(dev, "nuvoton,vref-impedance", 2329 &nau8825->vref_impedance); 2330 device_property_read_u32(dev, "nuvoton,sar-threshold-num", 2331 &nau8825->sar_threshold_num); 2332 device_property_read_u32_array(dev, "nuvoton,sar-threshold", 2333 nau8825->sar_threshold, nau8825->sar_threshold_num); 2334 device_property_read_u32(dev, "nuvoton,sar-hysteresis", 2335 &nau8825->sar_hysteresis); 2336 device_property_read_u32(dev, "nuvoton,sar-voltage", 2337 &nau8825->sar_voltage); 2338 device_property_read_u32(dev, "nuvoton,sar-compare-time", 2339 &nau8825->sar_compare_time); 2340 device_property_read_u32(dev, "nuvoton,sar-sampling-time", 2341 &nau8825->sar_sampling_time); 2342 device_property_read_u32(dev, "nuvoton,short-key-debounce", 2343 &nau8825->key_debounce); 2344 device_property_read_u32(dev, "nuvoton,jack-insert-debounce", 2345 &nau8825->jack_insert_debounce); 2346 device_property_read_u32(dev, "nuvoton,jack-eject-debounce", 2347 &nau8825->jack_eject_debounce); 2348 2349 nau8825->mclk = devm_clk_get(dev, "mclk"); 2350 if (PTR_ERR(nau8825->mclk) == -EPROBE_DEFER) { 2351 return -EPROBE_DEFER; 2352 } else if (PTR_ERR(nau8825->mclk) == -ENOENT) { 2353 /* The MCLK is managed externally or not used at all */ 2354 nau8825->mclk = NULL; 2355 dev_info(dev, "No 'mclk' clock found, assume MCLK is managed externally"); 2356 } else if (IS_ERR(nau8825->mclk)) { 2357 return -EINVAL; 2358 } 2359 2360 return 0; 2361 } 2362 2363 static int nau8825_setup_irq(struct nau8825 *nau8825) 2364 { 2365 int ret; 2366 2367 ret = devm_request_threaded_irq(nau8825->dev, nau8825->irq, NULL, 2368 nau8825_interrupt, IRQF_TRIGGER_LOW | IRQF_ONESHOT, 2369 "nau8825", nau8825); 2370 2371 if (ret) { 2372 dev_err(nau8825->dev, "Cannot request irq %d (%d)\n", 2373 nau8825->irq, ret); 2374 return ret; 2375 } 2376 2377 return 0; 2378 } 2379 2380 static int nau8825_i2c_probe(struct i2c_client *i2c, 2381 const struct i2c_device_id *id) 2382 { 2383 struct device *dev = &i2c->dev; 2384 struct nau8825 *nau8825 = dev_get_platdata(&i2c->dev); 2385 int ret, value; 2386 2387 if (!nau8825) { 2388 nau8825 = devm_kzalloc(dev, sizeof(*nau8825), GFP_KERNEL); 2389 if (!nau8825) 2390 return -ENOMEM; 2391 ret = nau8825_read_device_properties(dev, nau8825); 2392 if (ret) 2393 return ret; 2394 } 2395 2396 i2c_set_clientdata(i2c, nau8825); 2397 2398 nau8825->regmap = devm_regmap_init_i2c(i2c, &nau8825_regmap_config); 2399 if (IS_ERR(nau8825->regmap)) 2400 return PTR_ERR(nau8825->regmap); 2401 nau8825->dev = dev; 2402 nau8825->irq = i2c->irq; 2403 /* Initiate parameters, semaphone and work queue which are needed in 2404 * cross talk suppression measurment function. 2405 */ 2406 nau8825->xtalk_state = NAU8825_XTALK_DONE; 2407 nau8825->xtalk_protect = false; 2408 sema_init(&nau8825->xtalk_sem, 1); 2409 INIT_WORK(&nau8825->xtalk_work, nau8825_xtalk_work); 2410 2411 nau8825_print_device_properties(nau8825); 2412 2413 nau8825_reset_chip(nau8825->regmap); 2414 ret = regmap_read(nau8825->regmap, NAU8825_REG_I2C_DEVICE_ID, &value); 2415 if (ret < 0) { 2416 dev_err(dev, "Failed to read device id from the NAU8825: %d\n", 2417 ret); 2418 return ret; 2419 } 2420 if ((value & NAU8825_SOFTWARE_ID_MASK) != 2421 NAU8825_SOFTWARE_ID_NAU8825) { 2422 dev_err(dev, "Not a NAU8825 chip\n"); 2423 return -ENODEV; 2424 } 2425 2426 nau8825_init_regs(nau8825); 2427 2428 if (i2c->irq) 2429 nau8825_setup_irq(nau8825); 2430 2431 return snd_soc_register_codec(&i2c->dev, &nau8825_codec_driver, 2432 &nau8825_dai, 1); 2433 } 2434 2435 static int nau8825_i2c_remove(struct i2c_client *client) 2436 { 2437 snd_soc_unregister_codec(&client->dev); 2438 return 0; 2439 } 2440 2441 static const struct i2c_device_id nau8825_i2c_ids[] = { 2442 { "nau8825", 0 }, 2443 { } 2444 }; 2445 MODULE_DEVICE_TABLE(i2c, nau8825_i2c_ids); 2446 2447 #ifdef CONFIG_OF 2448 static const struct of_device_id nau8825_of_ids[] = { 2449 { .compatible = "nuvoton,nau8825", }, 2450 {} 2451 }; 2452 MODULE_DEVICE_TABLE(of, nau8825_of_ids); 2453 #endif 2454 2455 #ifdef CONFIG_ACPI 2456 static const struct acpi_device_id nau8825_acpi_match[] = { 2457 { "10508825", 0 }, 2458 {}, 2459 }; 2460 MODULE_DEVICE_TABLE(acpi, nau8825_acpi_match); 2461 #endif 2462 2463 static struct i2c_driver nau8825_driver = { 2464 .driver = { 2465 .name = "nau8825", 2466 .of_match_table = of_match_ptr(nau8825_of_ids), 2467 .acpi_match_table = ACPI_PTR(nau8825_acpi_match), 2468 }, 2469 .probe = nau8825_i2c_probe, 2470 .remove = nau8825_i2c_remove, 2471 .id_table = nau8825_i2c_ids, 2472 }; 2473 module_i2c_driver(nau8825_driver); 2474 2475 MODULE_DESCRIPTION("ASoC nau8825 driver"); 2476 MODULE_AUTHOR("Anatol Pomozov <anatol@chromium.org>"); 2477 MODULE_LICENSE("GPL"); 2478