xref: /openbmc/linux/sound/soc/codecs/lm4857.c (revision e23feb16)
1 /*
2  * LM4857 AMP driver
3  *
4  * Copyright 2007 Wolfson Microelectronics PLC.
5  * Author: Graeme Gregory
6  *         graeme.gregory@wolfsonmicro.com
7  * Copyright 2011 Lars-Peter Clausen <lars@metafoo.de>
8  *
9  *  This program is free software; you can redistribute  it and/or modify it
10  *  under  the terms of  the GNU General  Public License as published by the
11  *  Free Software Foundation;  either version 2 of the  License, or (at your
12  *  option) any later version.
13  *
14  */
15 
16 #include <linux/init.h>
17 #include <linux/module.h>
18 #include <linux/i2c.h>
19 #include <linux/regmap.h>
20 #include <linux/slab.h>
21 
22 #include <sound/core.h>
23 #include <sound/soc.h>
24 #include <sound/tlv.h>
25 
26 struct lm4857 {
27 	struct regmap *regmap;
28 	uint8_t mode;
29 };
30 
31 static const struct reg_default lm4857_default_regs[] = {
32 	{ 0x0, 0x00 },
33 	{ 0x1, 0x00 },
34 	{ 0x2, 0x00 },
35 	{ 0x3, 0x00 },
36 };
37 
38 /* The register offsets in the cache array */
39 #define LM4857_MVOL 0
40 #define LM4857_LVOL 1
41 #define LM4857_RVOL 2
42 #define LM4857_CTRL 3
43 
44 /* the shifts required to set these bits */
45 #define LM4857_3D 5
46 #define LM4857_WAKEUP 5
47 #define LM4857_EPGAIN 4
48 
49 static int lm4857_get_mode(struct snd_kcontrol *kcontrol,
50 	struct snd_ctl_elem_value *ucontrol)
51 {
52 	struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
53 	struct lm4857 *lm4857 = snd_soc_codec_get_drvdata(codec);
54 
55 	ucontrol->value.integer.value[0] = lm4857->mode;
56 
57 	return 0;
58 }
59 
60 static int lm4857_set_mode(struct snd_kcontrol *kcontrol,
61 	struct snd_ctl_elem_value *ucontrol)
62 {
63 	struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
64 	struct lm4857 *lm4857 = snd_soc_codec_get_drvdata(codec);
65 	uint8_t value = ucontrol->value.integer.value[0];
66 
67 	lm4857->mode = value;
68 
69 	if (codec->dapm.bias_level == SND_SOC_BIAS_ON)
70 		regmap_update_bits(lm4857->regmap, LM4857_CTRL, 0x0F, value + 6);
71 
72 	return 1;
73 }
74 
75 static int lm4857_set_bias_level(struct snd_soc_codec *codec,
76 				 enum snd_soc_bias_level level)
77 {
78 	struct lm4857 *lm4857 = snd_soc_codec_get_drvdata(codec);
79 
80 	switch (level) {
81 	case SND_SOC_BIAS_ON:
82 		regmap_update_bits(lm4857->regmap, LM4857_CTRL, 0x0F,
83 			lm4857->mode + 6);
84 		break;
85 	case SND_SOC_BIAS_STANDBY:
86 		regmap_update_bits(lm4857->regmap, LM4857_CTRL, 0x0F, 0);
87 		break;
88 	default:
89 		break;
90 	}
91 
92 	codec->dapm.bias_level = level;
93 
94 	return 0;
95 }
96 
97 static const char *lm4857_mode[] = {
98 	"Earpiece",
99 	"Loudspeaker",
100 	"Loudspeaker + Headphone",
101 	"Headphone",
102 };
103 
104 static const struct soc_enum lm4857_mode_enum =
105 	SOC_ENUM_SINGLE_EXT(ARRAY_SIZE(lm4857_mode), lm4857_mode);
106 
107 static const struct snd_soc_dapm_widget lm4857_dapm_widgets[] = {
108 	SND_SOC_DAPM_INPUT("IN"),
109 
110 	SND_SOC_DAPM_OUTPUT("LS"),
111 	SND_SOC_DAPM_OUTPUT("HP"),
112 	SND_SOC_DAPM_OUTPUT("EP"),
113 };
114 
115 static const DECLARE_TLV_DB_SCALE(stereo_tlv, -4050, 150, 0);
116 static const DECLARE_TLV_DB_SCALE(mono_tlv, -3450, 150, 0);
117 
118 static const struct snd_kcontrol_new lm4857_controls[] = {
119 	SOC_SINGLE_TLV("Left Playback Volume", LM4857_LVOL, 0, 31, 0,
120 		stereo_tlv),
121 	SOC_SINGLE_TLV("Right Playback Volume", LM4857_RVOL, 0, 31, 0,
122 		stereo_tlv),
123 	SOC_SINGLE_TLV("Mono Playback Volume", LM4857_MVOL, 0, 31, 0,
124 		mono_tlv),
125 	SOC_SINGLE("Spk 3D Playback Switch", LM4857_LVOL, LM4857_3D, 1, 0),
126 	SOC_SINGLE("HP 3D Playback Switch", LM4857_RVOL, LM4857_3D, 1, 0),
127 	SOC_SINGLE("Fast Wakeup Playback Switch", LM4857_CTRL,
128 		LM4857_WAKEUP, 1, 0),
129 	SOC_SINGLE("Earpiece 6dB Playback Switch", LM4857_CTRL,
130 		LM4857_EPGAIN, 1, 0),
131 
132 	SOC_ENUM_EXT("Mode", lm4857_mode_enum,
133 		lm4857_get_mode, lm4857_set_mode),
134 };
135 
136 /* There is a demux between the input signal and the output signals.
137  * Currently there is no easy way to model it in ASoC and since it does not make
138  * much of a difference in practice simply connect the input direclty to the
139  * outputs. */
140 static const struct snd_soc_dapm_route lm4857_routes[] = {
141 	{"LS", NULL, "IN"},
142 	{"HP", NULL, "IN"},
143 	{"EP", NULL, "IN"},
144 };
145 
146 static struct snd_soc_codec_driver soc_codec_dev_lm4857 = {
147 	.set_bias_level = lm4857_set_bias_level,
148 
149 	.controls = lm4857_controls,
150 	.num_controls = ARRAY_SIZE(lm4857_controls),
151 	.dapm_widgets = lm4857_dapm_widgets,
152 	.num_dapm_widgets = ARRAY_SIZE(lm4857_dapm_widgets),
153 	.dapm_routes = lm4857_routes,
154 	.num_dapm_routes = ARRAY_SIZE(lm4857_routes),
155 };
156 
157 static const struct regmap_config lm4857_regmap_config = {
158 	.val_bits = 6,
159 	.reg_bits = 2,
160 
161 	.max_register = LM4857_CTRL,
162 
163 	.cache_type = REGCACHE_FLAT,
164 	.reg_defaults = lm4857_default_regs,
165 	.num_reg_defaults = ARRAY_SIZE(lm4857_default_regs),
166 };
167 
168 static int lm4857_i2c_probe(struct i2c_client *i2c,
169 			    const struct i2c_device_id *id)
170 {
171 	struct lm4857 *lm4857;
172 
173 	lm4857 = devm_kzalloc(&i2c->dev, sizeof(*lm4857), GFP_KERNEL);
174 	if (!lm4857)
175 		return -ENOMEM;
176 
177 	i2c_set_clientdata(i2c, lm4857);
178 
179 	lm4857->regmap = devm_regmap_init_i2c(i2c, &lm4857_regmap_config);
180 	if (IS_ERR(lm4857->regmap))
181 		return PTR_ERR(lm4857->regmap);
182 
183 	return snd_soc_register_codec(&i2c->dev, &soc_codec_dev_lm4857, NULL, 0);
184 }
185 
186 static int lm4857_i2c_remove(struct i2c_client *i2c)
187 {
188 	snd_soc_unregister_codec(&i2c->dev);
189 	return 0;
190 }
191 
192 static const struct i2c_device_id lm4857_i2c_id[] = {
193 	{ "lm4857", 0 },
194 	{ }
195 };
196 MODULE_DEVICE_TABLE(i2c, lm4857_i2c_id);
197 
198 static struct i2c_driver lm4857_i2c_driver = {
199 	.driver = {
200 		.name = "lm4857",
201 		.owner = THIS_MODULE,
202 	},
203 	.probe = lm4857_i2c_probe,
204 	.remove = lm4857_i2c_remove,
205 	.id_table = lm4857_i2c_id,
206 };
207 
208 module_i2c_driver(lm4857_i2c_driver);
209 
210 MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
211 MODULE_DESCRIPTION("LM4857 amplifier driver");
212 MODULE_LICENSE("GPL");
213