1 /* SPDX-License-Identifier: GPL-2.0 */ 2 /* 3 * Driver of Inno Codec for rk3036 by Rockchip Inc. 4 * 5 * Author: Zheng ShunQian<zhengsq@rock-chips.com> 6 */ 7 8 #ifndef _INNO_RK3036_CODEC_H 9 #define _INNO_RK3036_CODEC_H 10 11 /* codec registers */ 12 #define INNO_R00 0x00 13 #define INNO_R01 0x0c 14 #define INNO_R02 0x10 15 #define INNO_R03 0x14 16 #define INNO_R04 0x88 17 #define INNO_R05 0x8c 18 #define INNO_R06 0x90 19 #define INNO_R07 0x94 20 #define INNO_R08 0x98 21 #define INNO_R09 0x9c 22 #define INNO_R10 0xa0 23 24 /* register bit filed */ 25 #define INNO_R00_CSR_RESET (0x0 << 0) /*codec system reset*/ 26 #define INNO_R00_CSR_WORK (0x1 << 0) 27 #define INNO_R00_CDCR_RESET (0x0 << 1) /*codec digital core reset*/ 28 #define INNO_R00_CDCR_WORK (0x1 << 1) 29 #define INNO_R00_PRB_DISABLE (0x0 << 6) /*power reset bypass*/ 30 #define INNO_R00_PRB_ENABLE (0x1 << 6) 31 32 #define INNO_R01_I2SMODE_MSK (0x1 << 4) 33 #define INNO_R01_I2SMODE_SLAVE (0x0 << 4) 34 #define INNO_R01_I2SMODE_MASTER (0x1 << 4) 35 #define INNO_R01_PINDIR_MSK (0x1 << 5) 36 #define INNO_R01_PINDIR_IN_SLAVE (0x0 << 5) /*direction of pin*/ 37 #define INNO_R01_PINDIR_OUT_MASTER (0x1 << 5) 38 39 #define INNO_R02_LRS_MSK (0x1 << 2) 40 #define INNO_R02_LRS_NORMAL (0x0 << 2) /*DAC Left Right Swap*/ 41 #define INNO_R02_LRS_SWAP (0x1 << 2) 42 #define INNO_R02_DACM_MSK (0x3 << 3) 43 #define INNO_R02_DACM_PCM (0x3 << 3) /*DAC Mode*/ 44 #define INNO_R02_DACM_I2S (0x2 << 3) 45 #define INNO_R02_DACM_LJM (0x1 << 3) 46 #define INNO_R02_DACM_RJM (0x0 << 3) 47 #define INNO_R02_VWL_MSK (0x3 << 5) 48 #define INNO_R02_VWL_32BIT (0x3 << 5) /*1/2Frame Valid Word Len*/ 49 #define INNO_R02_VWL_24BIT (0x2 << 5) 50 #define INNO_R02_VWL_20BIT (0x1 << 5) 51 #define INNO_R02_VWL_16BIT (0x0 << 5) 52 #define INNO_R02_LRCP_MSK (0x1 << 7) 53 #define INNO_R02_LRCP_NORMAL (0x0 << 7) /*Left Right Polarity*/ 54 #define INNO_R02_LRCP_REVERSAL (0x1 << 7) 55 56 #define INNO_R03_BCP_MSK (0x1 << 0) 57 #define INNO_R03_BCP_NORMAL (0x0 << 0) /*DAC bit clock polarity*/ 58 #define INNO_R03_BCP_REVERSAL (0x1 << 0) 59 #define INNO_R03_DACR_MSK (0x1 << 1) 60 #define INNO_R03_DACR_RESET (0x0 << 1) /*DAC Reset*/ 61 #define INNO_R03_DACR_WORK (0x1 << 1) 62 #define INNO_R03_FWL_MSK (0x3 << 2) 63 #define INNO_R03_FWL_32BIT (0x3 << 2) /*1/2Frame Word Length*/ 64 #define INNO_R03_FWL_24BIT (0x2 << 2) 65 #define INNO_R03_FWL_20BIT (0x1 << 2) 66 #define INNO_R03_FWL_16BIT (0x0 << 2) 67 68 #define INNO_R04_DACR_SW_SHIFT 0 69 #define INNO_R04_DACL_SW_SHIFT 1 70 #define INNO_R04_DACR_CLK_SHIFT 2 71 #define INNO_R04_DACL_CLK_SHIFT 3 72 #define INNO_R04_DACR_VREF_SHIFT 4 73 #define INNO_R04_DACL_VREF_SHIFT 5 74 75 #define INNO_R05_HPR_EN_SHIFT 0 76 #define INNO_R05_HPL_EN_SHIFT 1 77 #define INNO_R05_HPR_WORK_SHIFT 2 78 #define INNO_R05_HPL_WORK_SHIFT 3 79 80 #define INNO_R06_VOUTR_CZ_SHIFT 0 81 #define INNO_R06_VOUTL_CZ_SHIFT 1 82 #define INNO_R06_DACR_HILO_VREF_SHIFT 2 83 #define INNO_R06_DACL_HILO_VREF_SHIFT 3 84 #define INNO_R06_DAC_EN_SHIFT 5 85 86 #define INNO_R06_DAC_PRECHARGE (0x0 << 4) /*PreCharge control for DAC*/ 87 #define INNO_R06_DAC_DISCHARGE (0x1 << 4) 88 89 #define INNO_HP_GAIN_SHIFT 0 90 /* Gain of output, 1.5db step: -39db(0x0) ~ 0db(0x1a) ~ 6db(0x1f) */ 91 #define INNO_HP_GAIN_0DB 0x1a 92 #define INNO_HP_GAIN_N39DB 0x0 93 94 #define INNO_R09_HP_ANTIPOP_MSK 0x3 95 #define INNO_R09_HP_ANTIPOP_OFF 0x1 96 #define INNO_R09_HP_ANTIPOP_ON 0x2 97 #define INNO_R09_HPR_ANITPOP_SHIFT 0 98 #define INNO_R09_HPL_ANITPOP_SHIFT 2 99 #define INNO_R09_HPR_MUTE_SHIFT 4 100 #define INNO_R09_HPL_MUTE_SHIFT 5 101 #define INNO_R09_DACR_SWITCH_SHIFT 6 102 #define INNO_R09_DACL_SWITCH_SHIFT 7 103 104 #define INNO_R10_CHARGE_SEL_CUR_400I_YES (0x0 << 0) 105 #define INNO_R10_CHARGE_SEL_CUR_400I_NO (0x1 << 0) 106 #define INNO_R10_CHARGE_SEL_CUR_260I_YES (0x0 << 1) 107 #define INNO_R10_CHARGE_SEL_CUR_260I_NO (0x1 << 1) 108 #define INNO_R10_CHARGE_SEL_CUR_130I_YES (0x0 << 2) 109 #define INNO_R10_CHARGE_SEL_CUR_130I_NO (0x1 << 2) 110 #define INNO_R10_CHARGE_SEL_CUR_100I_YES (0x0 << 3) 111 #define INNO_R10_CHARGE_SEL_CUR_100I_NO (0x1 << 3) 112 #define INNO_R10_CHARGE_SEL_CUR_050I_YES (0x0 << 4) 113 #define INNO_R10_CHARGE_SEL_CUR_050I_NO (0x1 << 4) 114 #define INNO_R10_CHARGE_SEL_CUR_027I_YES (0x0 << 5) 115 #define INNO_R10_CHARGE_SEL_CUR_027I_NO (0x1 << 5) 116 117 #define INNO_R10_MAX_CUR (INNO_R10_CHARGE_SEL_CUR_400I_YES | \ 118 INNO_R10_CHARGE_SEL_CUR_260I_YES | \ 119 INNO_R10_CHARGE_SEL_CUR_130I_YES | \ 120 INNO_R10_CHARGE_SEL_CUR_100I_YES | \ 121 INNO_R10_CHARGE_SEL_CUR_050I_YES | \ 122 INNO_R10_CHARGE_SEL_CUR_027I_YES) 123 124 #endif 125