1# Helper to resolve issues with configs that have SPI enabled but I2C 2# modular, meaning we can't build the codec driver in with I2C support. 3# We use an ordered list of conditional defaults to pick the appropriate 4# setting - SPI can't be modular so that case doesn't need to be covered. 5config SND_SOC_I2C_AND_SPI 6 tristate 7 default m if I2C=m 8 default y if I2C=y 9 default y if SPI_MASTER=y 10 11config SND_SOC_ALL_CODECS 12 tristate "Build all ASoC CODEC drivers" 13 select SND_SOC_L3 14 select SND_SOC_AC97_CODEC if SND_SOC_AC97_BUS 15 select SND_SOC_AD1980 if SND_SOC_AC97_BUS 16 select SND_SOC_AD73311 if I2C 17 select SND_SOC_AK4104 if SPI_MASTER 18 select SND_SOC_AK4535 if I2C 19 select SND_SOC_CS4270 if I2C 20 select SND_SOC_PCM3008 21 select SND_SOC_SSM2602 if I2C 22 select SND_SOC_TLV320AIC23 if I2C 23 select SND_SOC_TLV320AIC26 if SPI_MASTER 24 select SND_SOC_TLV320AIC3X if I2C 25 select SND_SOC_TWL4030 if TWL4030_CORE 26 select SND_SOC_UDA134X 27 select SND_SOC_UDA1380 if I2C 28 select SND_SOC_WM8350 if MFD_WM8350 29 select SND_SOC_WM8400 if MFD_WM8400 30 select SND_SOC_WM8510 if SND_SOC_I2C_AND_SPI 31 select SND_SOC_WM8580 if I2C 32 select SND_SOC_WM8728 if SND_SOC_I2C_AND_SPI 33 select SND_SOC_WM8731 if SND_SOC_I2C_AND_SPI 34 select SND_SOC_WM8750 if SND_SOC_I2C_AND_SPI 35 select SND_SOC_WM8753 if SND_SOC_I2C_AND_SPI 36 select SND_SOC_WM8900 if I2C 37 select SND_SOC_WM8903 if I2C 38 select SND_SOC_WM8971 if I2C 39 select SND_SOC_WM8990 if I2C 40 select SND_SOC_WM9705 if SND_SOC_AC97_BUS 41 select SND_SOC_WM9712 if SND_SOC_AC97_BUS 42 select SND_SOC_WM9713 if SND_SOC_AC97_BUS 43 help 44 Normally ASoC codec drivers are only built if a machine driver which 45 uses them is also built since they are only usable with a machine 46 driver. Selecting this option will allow these drivers to be built 47 without an explicit machine driver for test and development purposes. 48 49 Support for the bus types used to access the codecs to be built must 50 be selected separately. 51 52 If unsure select "N". 53 54 55config SND_SOC_AC97_CODEC 56 tristate 57 select SND_AC97_CODEC 58 59config SND_SOC_AD1980 60 tristate 61 62config SND_SOC_AD73311 63 tristate 64 65config SND_SOC_AK4104 66 tristate 67 68config SND_SOC_AK4535 69 tristate 70 71# Cirrus Logic CS4270 Codec 72config SND_SOC_CS4270 73 tristate 74 75# Cirrus Logic CS4270 Codec VD = 3.3V Errata 76# Select if you are affected by the errata where the part will not function 77# if MCLK divide-by-1.5 is selected and VD is set to 3.3V. The driver will 78# not select any sample rates that require MCLK to be divided by 1.5. 79config SND_SOC_CS4270_VD33_ERRATA 80 bool 81 depends on SND_SOC_CS4270 82 83config SND_SOC_L3 84 tristate 85 86config SND_SOC_PCM3008 87 tristate 88 89config SND_SOC_SSM2602 90 tristate 91 92config SND_SOC_TLV320AIC23 93 tristate 94 95config SND_SOC_TLV320AIC26 96 tristate "TI TLV320AIC26 Codec support" if SND_SOC_OF_SIMPLE 97 depends on SPI 98 99config SND_SOC_TLV320AIC3X 100 tristate 101 102config SND_SOC_TWL4030 103 tristate 104 105config SND_SOC_UDA134X 106 tristate 107 108config SND_SOC_UDA1380 109 tristate 110 111config SND_SOC_WM8350 112 tristate 113 114config SND_SOC_WM8400 115 tristate 116 117config SND_SOC_WM8510 118 tristate 119 120config SND_SOC_WM8580 121 tristate 122 123config SND_SOC_WM8728 124 tristate 125 126config SND_SOC_WM8731 127 tristate 128 129config SND_SOC_WM8750 130 tristate 131 132config SND_SOC_WM8753 133 tristate 134 135config SND_SOC_WM8900 136 tristate 137 138config SND_SOC_WM8903 139 tristate 140 141config SND_SOC_WM8971 142 tristate 143 144config SND_SOC_WM8990 145 tristate 146 147config SND_SOC_WM9705 148 tristate 149 150config SND_SOC_WM9712 151 tristate 152 153config SND_SOC_WM9713 154 tristate 155