1 // SPDX-License-Identifier: GPL-2.0 2 // 3 // TSE-850 audio - ASoC driver for the Axentia TSE-850 with a PCM5142 codec 4 // 5 // Copyright (C) 2016 Axentia Technologies AB 6 // 7 // Author: Peter Rosin <peda@axentia.se> 8 // 9 // loop1 relays 10 // IN1 +---o +------------+ o---+ OUT1 11 // \ / 12 // + + 13 // | / | 14 // +--o +--. | 15 // | add | | 16 // | V | 17 // | .---. | 18 // DAC +----------->|Sum|---+ 19 // | '---' | 20 // | | 21 // + + 22 // 23 // IN2 +---o--+------------+--o---+ OUT2 24 // loop2 relays 25 // 26 // The 'loop1' gpio pin controls two relays, which are either in loop 27 // position, meaning that input and output are directly connected, or 28 // they are in mixer position, meaning that the signal is passed through 29 // the 'Sum' mixer. Similarly for 'loop2'. 30 // 31 // In the above, the 'loop1' relays are inactive, thus feeding IN1 to the 32 // mixer (if 'add' is active) and feeding the mixer output to OUT1. The 33 // 'loop2' relays are active, short-cutting the TSE-850 from channel 2. 34 // IN1, IN2, OUT1 and OUT2 are TSE-850 connectors and DAC is the PCB name 35 // of the (filtered) output from the PCM5142 codec. 36 37 #include <linux/clk.h> 38 #include <linux/gpio.h> 39 #include <linux/module.h> 40 #include <linux/of.h> 41 #include <linux/of_device.h> 42 #include <linux/of_gpio.h> 43 #include <linux/regulator/consumer.h> 44 45 #include <sound/soc.h> 46 #include <sound/pcm_params.h> 47 48 struct tse850_priv { 49 struct gpio_desc *add; 50 struct gpio_desc *loop1; 51 struct gpio_desc *loop2; 52 53 struct regulator *ana; 54 55 int add_cache; 56 int loop1_cache; 57 int loop2_cache; 58 }; 59 60 static int tse850_get_mux1(struct snd_kcontrol *kctrl, 61 struct snd_ctl_elem_value *ucontrol) 62 { 63 struct snd_soc_dapm_context *dapm = snd_soc_dapm_kcontrol_dapm(kctrl); 64 struct snd_soc_card *card = dapm->card; 65 struct tse850_priv *tse850 = snd_soc_card_get_drvdata(card); 66 67 ucontrol->value.enumerated.item[0] = tse850->loop1_cache; 68 69 return 0; 70 } 71 72 static int tse850_put_mux1(struct snd_kcontrol *kctrl, 73 struct snd_ctl_elem_value *ucontrol) 74 { 75 struct snd_soc_dapm_context *dapm = snd_soc_dapm_kcontrol_dapm(kctrl); 76 struct snd_soc_card *card = dapm->card; 77 struct tse850_priv *tse850 = snd_soc_card_get_drvdata(card); 78 struct soc_enum *e = (struct soc_enum *)kctrl->private_value; 79 unsigned int val = ucontrol->value.enumerated.item[0]; 80 81 if (val >= e->items) 82 return -EINVAL; 83 84 gpiod_set_value_cansleep(tse850->loop1, val); 85 tse850->loop1_cache = val; 86 87 return snd_soc_dapm_put_enum_double(kctrl, ucontrol); 88 } 89 90 static int tse850_get_mux2(struct snd_kcontrol *kctrl, 91 struct snd_ctl_elem_value *ucontrol) 92 { 93 struct snd_soc_dapm_context *dapm = snd_soc_dapm_kcontrol_dapm(kctrl); 94 struct snd_soc_card *card = dapm->card; 95 struct tse850_priv *tse850 = snd_soc_card_get_drvdata(card); 96 97 ucontrol->value.enumerated.item[0] = tse850->loop2_cache; 98 99 return 0; 100 } 101 102 static int tse850_put_mux2(struct snd_kcontrol *kctrl, 103 struct snd_ctl_elem_value *ucontrol) 104 { 105 struct snd_soc_dapm_context *dapm = snd_soc_dapm_kcontrol_dapm(kctrl); 106 struct snd_soc_card *card = dapm->card; 107 struct tse850_priv *tse850 = snd_soc_card_get_drvdata(card); 108 struct soc_enum *e = (struct soc_enum *)kctrl->private_value; 109 unsigned int val = ucontrol->value.enumerated.item[0]; 110 111 if (val >= e->items) 112 return -EINVAL; 113 114 gpiod_set_value_cansleep(tse850->loop2, val); 115 tse850->loop2_cache = val; 116 117 return snd_soc_dapm_put_enum_double(kctrl, ucontrol); 118 } 119 120 static int tse850_get_mix(struct snd_kcontrol *kctrl, 121 struct snd_ctl_elem_value *ucontrol) 122 { 123 struct snd_soc_dapm_context *dapm = snd_soc_dapm_kcontrol_dapm(kctrl); 124 struct snd_soc_card *card = dapm->card; 125 struct tse850_priv *tse850 = snd_soc_card_get_drvdata(card); 126 127 ucontrol->value.enumerated.item[0] = tse850->add_cache; 128 129 return 0; 130 } 131 132 static int tse850_put_mix(struct snd_kcontrol *kctrl, 133 struct snd_ctl_elem_value *ucontrol) 134 { 135 struct snd_soc_dapm_context *dapm = snd_soc_dapm_kcontrol_dapm(kctrl); 136 struct snd_soc_card *card = dapm->card; 137 struct tse850_priv *tse850 = snd_soc_card_get_drvdata(card); 138 int connect = !!ucontrol->value.integer.value[0]; 139 140 if (tse850->add_cache == connect) 141 return 0; 142 143 /* 144 * Hmmm, this gpiod_set_value_cansleep call should probably happen 145 * inside snd_soc_dapm_mixer_update_power in the loop. 146 */ 147 gpiod_set_value_cansleep(tse850->add, connect); 148 tse850->add_cache = connect; 149 150 snd_soc_dapm_mixer_update_power(dapm, kctrl, connect, NULL); 151 return 1; 152 } 153 154 static int tse850_get_ana(struct snd_kcontrol *kctrl, 155 struct snd_ctl_elem_value *ucontrol) 156 { 157 struct snd_soc_dapm_context *dapm = snd_soc_dapm_kcontrol_dapm(kctrl); 158 struct snd_soc_card *card = dapm->card; 159 struct tse850_priv *tse850 = snd_soc_card_get_drvdata(card); 160 int ret; 161 162 ret = regulator_get_voltage(tse850->ana); 163 if (ret < 0) 164 return ret; 165 166 /* 167 * Map regulator output values like so: 168 * -11.5V to "Low" (enum 0) 169 * 11.5V-12.5V to "12V" (enum 1) 170 * 12.5V-13.5V to "13V" (enum 2) 171 * ... 172 * 18.5V-19.5V to "19V" (enum 8) 173 * 19.5V- to "20V" (enum 9) 174 */ 175 if (ret < 11000000) 176 ret = 11000000; 177 else if (ret > 20000000) 178 ret = 20000000; 179 ret -= 11000000; 180 ret = (ret + 500000) / 1000000; 181 182 ucontrol->value.enumerated.item[0] = ret; 183 184 return 0; 185 } 186 187 static int tse850_put_ana(struct snd_kcontrol *kctrl, 188 struct snd_ctl_elem_value *ucontrol) 189 { 190 struct snd_soc_dapm_context *dapm = snd_soc_dapm_kcontrol_dapm(kctrl); 191 struct snd_soc_card *card = dapm->card; 192 struct tse850_priv *tse850 = snd_soc_card_get_drvdata(card); 193 struct soc_enum *e = (struct soc_enum *)kctrl->private_value; 194 unsigned int uV = ucontrol->value.enumerated.item[0]; 195 int ret; 196 197 if (uV >= e->items) 198 return -EINVAL; 199 200 /* 201 * Map enum zero (Low) to 2 volts on the regulator, do this since 202 * the ana regulator is supplied by the system 12V voltage and 203 * requesting anything below the system voltage causes the system 204 * voltage to be passed through the regulator. Also, the ana 205 * regulator induces noise when requesting voltages near the 206 * system voltage. So, by mapping Low to 2V, that noise is 207 * eliminated when all that is needed is 12V (the system voltage). 208 */ 209 if (uV) 210 uV = 11000000 + (1000000 * uV); 211 else 212 uV = 2000000; 213 214 ret = regulator_set_voltage(tse850->ana, uV, uV); 215 if (ret < 0) 216 return ret; 217 218 return snd_soc_dapm_put_enum_double(kctrl, ucontrol); 219 } 220 221 static const char * const mux_text[] = { "Mixer", "Loop" }; 222 223 static const struct soc_enum mux_enum = 224 SOC_ENUM_SINGLE(SND_SOC_NOPM, 0, ARRAY_SIZE(mux_text), mux_text); 225 226 static const struct snd_kcontrol_new mux1 = 227 SOC_DAPM_ENUM_EXT("MUX1", mux_enum, tse850_get_mux1, tse850_put_mux1); 228 229 static const struct snd_kcontrol_new mux2 = 230 SOC_DAPM_ENUM_EXT("MUX2", mux_enum, tse850_get_mux2, tse850_put_mux2); 231 232 #define TSE850_DAPM_SINGLE_EXT(xname, reg, shift, max, invert, xget, xput) \ 233 { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \ 234 .info = snd_soc_info_volsw, \ 235 .get = xget, \ 236 .put = xput, \ 237 .private_value = SOC_SINGLE_VALUE(reg, shift, max, invert, 0) } 238 239 static const struct snd_kcontrol_new mix[] = { 240 TSE850_DAPM_SINGLE_EXT("IN Switch", SND_SOC_NOPM, 0, 1, 0, 241 tse850_get_mix, tse850_put_mix), 242 }; 243 244 static const char * const ana_text[] = { 245 "Low", "12V", "13V", "14V", "15V", "16V", "17V", "18V", "19V", "20V" 246 }; 247 248 static const struct soc_enum ana_enum = 249 SOC_ENUM_SINGLE(SND_SOC_NOPM, 0, ARRAY_SIZE(ana_text), ana_text); 250 251 static const struct snd_kcontrol_new out = 252 SOC_DAPM_ENUM_EXT("ANA", ana_enum, tse850_get_ana, tse850_put_ana); 253 254 static const struct snd_soc_dapm_widget tse850_dapm_widgets[] = { 255 SND_SOC_DAPM_LINE("OUT1", NULL), 256 SND_SOC_DAPM_LINE("OUT2", NULL), 257 SND_SOC_DAPM_LINE("IN1", NULL), 258 SND_SOC_DAPM_LINE("IN2", NULL), 259 SND_SOC_DAPM_INPUT("DAC"), 260 SND_SOC_DAPM_AIF_IN("AIFINL", "Playback", 0, SND_SOC_NOPM, 0, 0), 261 SND_SOC_DAPM_AIF_IN("AIFINR", "Playback", 1, SND_SOC_NOPM, 0, 0), 262 SOC_MIXER_ARRAY("MIX", SND_SOC_NOPM, 0, 0, mix), 263 SND_SOC_DAPM_MUX("MUX1", SND_SOC_NOPM, 0, 0, &mux1), 264 SND_SOC_DAPM_MUX("MUX2", SND_SOC_NOPM, 0, 0, &mux2), 265 SND_SOC_DAPM_OUT_DRV("OUT", SND_SOC_NOPM, 0, 0, &out, 1), 266 }; 267 268 /* 269 * These connections are not entirely correct, since both IN1 and IN2 270 * are always fed to MIX (if the "IN switch" is set so), i.e. without 271 * regard to the loop1 and loop2 relays that according to this only 272 * control MUX1 and MUX2 but in fact also control how the input signals 273 * are routed. 274 * But, 1) I don't know how to do it right, and 2) it doesn't seem to 275 * matter in practice since nothing is powered in those sections anyway. 276 */ 277 static const struct snd_soc_dapm_route tse850_intercon[] = { 278 { "OUT1", NULL, "MUX1" }, 279 { "OUT2", NULL, "MUX2" }, 280 281 { "MUX1", "Loop", "IN1" }, 282 { "MUX1", "Mixer", "OUT" }, 283 284 { "MUX2", "Loop", "IN2" }, 285 { "MUX2", "Mixer", "OUT" }, 286 287 { "OUT", NULL, "MIX" }, 288 289 { "MIX", NULL, "DAC" }, 290 { "MIX", "IN Switch", "IN1" }, 291 { "MIX", "IN Switch", "IN2" }, 292 293 /* connect board input to the codec left channel output pin */ 294 { "DAC", NULL, "OUTL" }, 295 }; 296 297 SND_SOC_DAILINK_DEFS(pcm, 298 DAILINK_COMP_ARRAY(COMP_EMPTY()), 299 DAILINK_COMP_ARRAY(COMP_CODEC(NULL, "pcm512x-hifi")), 300 DAILINK_COMP_ARRAY(COMP_EMPTY())); 301 302 static struct snd_soc_dai_link tse850_dailink = { 303 .name = "TSE-850", 304 .stream_name = "TSE-850-PCM", 305 .dai_fmt = SND_SOC_DAIFMT_I2S 306 | SND_SOC_DAIFMT_NB_NF 307 | SND_SOC_DAIFMT_CBP_CFC, 308 SND_SOC_DAILINK_REG(pcm), 309 }; 310 311 static struct snd_soc_card tse850_card = { 312 .name = "TSE-850-ASoC", 313 .owner = THIS_MODULE, 314 .dai_link = &tse850_dailink, 315 .num_links = 1, 316 .dapm_widgets = tse850_dapm_widgets, 317 .num_dapm_widgets = ARRAY_SIZE(tse850_dapm_widgets), 318 .dapm_routes = tse850_intercon, 319 .num_dapm_routes = ARRAY_SIZE(tse850_intercon), 320 .fully_routed = true, 321 }; 322 323 static int tse850_dt_init(struct platform_device *pdev) 324 { 325 struct device_node *np = pdev->dev.of_node; 326 struct device_node *codec_np, *cpu_np; 327 struct snd_soc_dai_link *dailink = &tse850_dailink; 328 329 if (!np) { 330 dev_err(&pdev->dev, "only device tree supported\n"); 331 return -EINVAL; 332 } 333 334 cpu_np = of_parse_phandle(np, "axentia,cpu-dai", 0); 335 if (!cpu_np) { 336 dev_err(&pdev->dev, "failed to get cpu dai\n"); 337 return -EINVAL; 338 } 339 dailink->cpus->of_node = cpu_np; 340 dailink->platforms->of_node = cpu_np; 341 of_node_put(cpu_np); 342 343 codec_np = of_parse_phandle(np, "axentia,audio-codec", 0); 344 if (!codec_np) { 345 dev_err(&pdev->dev, "failed to get codec info\n"); 346 return -EINVAL; 347 } 348 dailink->codecs->of_node = codec_np; 349 of_node_put(codec_np); 350 351 return 0; 352 } 353 354 static int tse850_probe(struct platform_device *pdev) 355 { 356 struct snd_soc_card *card = &tse850_card; 357 struct device *dev = card->dev = &pdev->dev; 358 struct tse850_priv *tse850; 359 int ret; 360 361 tse850 = devm_kzalloc(dev, sizeof(*tse850), GFP_KERNEL); 362 if (!tse850) 363 return -ENOMEM; 364 365 snd_soc_card_set_drvdata(card, tse850); 366 367 ret = tse850_dt_init(pdev); 368 if (ret) { 369 dev_err(dev, "failed to init dt info\n"); 370 return ret; 371 } 372 373 tse850->add = devm_gpiod_get(dev, "axentia,add", GPIOD_OUT_HIGH); 374 if (IS_ERR(tse850->add)) 375 return dev_err_probe(dev, PTR_ERR(tse850->add), 376 "failed to get 'add' gpio\n"); 377 tse850->add_cache = 1; 378 379 tse850->loop1 = devm_gpiod_get(dev, "axentia,loop1", GPIOD_OUT_HIGH); 380 if (IS_ERR(tse850->loop1)) 381 return dev_err_probe(dev, PTR_ERR(tse850->loop1), 382 "failed to get 'loop1' gpio\n"); 383 tse850->loop1_cache = 1; 384 385 tse850->loop2 = devm_gpiod_get(dev, "axentia,loop2", GPIOD_OUT_HIGH); 386 if (IS_ERR(tse850->loop2)) 387 return dev_err_probe(dev, PTR_ERR(tse850->loop2), 388 "failed to get 'loop2' gpio\n"); 389 tse850->loop2_cache = 1; 390 391 tse850->ana = devm_regulator_get(dev, "axentia,ana"); 392 if (IS_ERR(tse850->ana)) 393 return dev_err_probe(dev, PTR_ERR(tse850->ana), 394 "failed to get 'ana' regulator\n"); 395 396 ret = regulator_enable(tse850->ana); 397 if (ret < 0) { 398 dev_err(dev, "failed to enable the 'ana' regulator\n"); 399 return ret; 400 } 401 402 ret = snd_soc_register_card(card); 403 if (ret) { 404 dev_err(dev, "snd_soc_register_card failed\n"); 405 goto err_disable_ana; 406 } 407 408 return 0; 409 410 err_disable_ana: 411 regulator_disable(tse850->ana); 412 return ret; 413 } 414 415 static void tse850_remove(struct platform_device *pdev) 416 { 417 struct snd_soc_card *card = platform_get_drvdata(pdev); 418 struct tse850_priv *tse850 = snd_soc_card_get_drvdata(card); 419 420 snd_soc_unregister_card(card); 421 regulator_disable(tse850->ana); 422 } 423 424 static const struct of_device_id tse850_dt_ids[] = { 425 { .compatible = "axentia,tse850-pcm5142", }, 426 { /* sentinel */ } 427 }; 428 MODULE_DEVICE_TABLE(of, tse850_dt_ids); 429 430 static struct platform_driver tse850_driver = { 431 .driver = { 432 .name = "axentia-tse850-pcm5142", 433 .of_match_table = of_match_ptr(tse850_dt_ids), 434 }, 435 .probe = tse850_probe, 436 .remove_new = tse850_remove, 437 }; 438 439 module_platform_driver(tse850_driver); 440 441 /* Module information */ 442 MODULE_AUTHOR("Peter Rosin <peda@axentia.se>"); 443 MODULE_DESCRIPTION("ALSA SoC driver for TSE-850 with PCM5142 codec"); 444 MODULE_LICENSE("GPL v2"); 445