1 /* 2 * Driver for Digigram miXart soundcards 3 * 4 * DSP firmware management 5 * 6 * Copyright (c) 2003 by Digigram <alsa@digigram.com> 7 * 8 * This program is free software; you can redistribute it and/or modify 9 * it under the terms of the GNU General Public License as published by 10 * the Free Software Foundation; either version 2 of the License, or 11 * (at your option) any later version. 12 * 13 * This program is distributed in the hope that it will be useful, 14 * but WITHOUT ANY WARRANTY; without even the implied warranty of 15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 16 * GNU General Public License for more details. 17 * 18 * You should have received a copy of the GNU General Public License 19 * along with this program; if not, write to the Free Software 20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA 21 */ 22 23 #include <linux/interrupt.h> 24 #include <linux/pci.h> 25 #include <linux/firmware.h> 26 #include <linux/vmalloc.h> 27 #include <asm/io.h> 28 #include <sound/core.h> 29 #include "mixart.h" 30 #include "mixart_mixer.h" 31 #include "mixart_core.h" 32 #include "mixart_hwdep.h" 33 34 35 /** 36 * wait for a value on a peudo register, exit with a timeout 37 * 38 * @param mgr pointer to miXart manager structure 39 * @param offset unsigned pseudo_register base + offset of value 40 * @param value value 41 * @param timeout timeout in centisenconds 42 */ 43 static int mixart_wait_nice_for_register_value(struct mixart_mgr *mgr, 44 u32 offset, int is_egal, 45 u32 value, unsigned long timeout) 46 { 47 unsigned long end_time = jiffies + (timeout * HZ / 100); 48 u32 read; 49 50 do { /* we may take too long time in this loop. 51 * so give controls back to kernel if needed. 52 */ 53 cond_resched(); 54 55 read = readl_be( MIXART_MEM( mgr, offset )); 56 if(is_egal) { 57 if(read == value) return 0; 58 } 59 else { /* wait for different value */ 60 if(read != value) return 0; 61 } 62 } while ( time_after_eq(end_time, jiffies) ); 63 64 return -EBUSY; 65 } 66 67 68 /* 69 structures needed to upload elf code packets 70 */ 71 struct snd_mixart_elf32_ehdr { 72 u8 e_ident[16]; 73 u16 e_type; 74 u16 e_machine; 75 u32 e_version; 76 u32 e_entry; 77 u32 e_phoff; 78 u32 e_shoff; 79 u32 e_flags; 80 u16 e_ehsize; 81 u16 e_phentsize; 82 u16 e_phnum; 83 u16 e_shentsize; 84 u16 e_shnum; 85 u16 e_shstrndx; 86 }; 87 88 struct snd_mixart_elf32_phdr { 89 u32 p_type; 90 u32 p_offset; 91 u32 p_vaddr; 92 u32 p_paddr; 93 u32 p_filesz; 94 u32 p_memsz; 95 u32 p_flags; 96 u32 p_align; 97 }; 98 99 static int mixart_load_elf(struct mixart_mgr *mgr, const struct firmware *dsp ) 100 { 101 char elf32_magic_number[4] = {0x7f,'E','L','F'}; 102 struct snd_mixart_elf32_ehdr *elf_header; 103 int i; 104 105 elf_header = (struct snd_mixart_elf32_ehdr *)dsp->data; 106 for( i=0; i<4; i++ ) 107 if ( elf32_magic_number[i] != elf_header->e_ident[i] ) 108 return -EINVAL; 109 110 if( elf_header->e_phoff != 0 ) { 111 struct snd_mixart_elf32_phdr elf_programheader; 112 113 for( i=0; i < be16_to_cpu(elf_header->e_phnum); i++ ) { 114 u32 pos = be32_to_cpu(elf_header->e_phoff) + (u32)(i * be16_to_cpu(elf_header->e_phentsize)); 115 116 memcpy( &elf_programheader, dsp->data + pos, sizeof(elf_programheader) ); 117 118 if(elf_programheader.p_type != 0) { 119 if( elf_programheader.p_filesz != 0 ) { 120 memcpy_toio( MIXART_MEM( mgr, be32_to_cpu(elf_programheader.p_vaddr)), 121 dsp->data + be32_to_cpu( elf_programheader.p_offset ), 122 be32_to_cpu( elf_programheader.p_filesz )); 123 } 124 } 125 } 126 } 127 return 0; 128 } 129 130 /* 131 * get basic information and init miXart 132 */ 133 134 /* audio IDs for request to the board */ 135 #define MIXART_FIRST_ANA_AUDIO_ID 0 136 #define MIXART_FIRST_DIG_AUDIO_ID 8 137 138 static int mixart_enum_connectors(struct mixart_mgr *mgr) 139 { 140 u32 k; 141 int err; 142 struct mixart_msg request; 143 struct mixart_enum_connector_resp *connector; 144 struct mixart_audio_info_req *audio_info_req; 145 struct mixart_audio_info_resp *audio_info; 146 147 connector = kmalloc(sizeof(*connector), GFP_KERNEL); 148 audio_info_req = kmalloc(sizeof(*audio_info_req), GFP_KERNEL); 149 audio_info = kmalloc(sizeof(*audio_info), GFP_KERNEL); 150 if (! connector || ! audio_info_req || ! audio_info) { 151 err = -ENOMEM; 152 goto __error; 153 } 154 155 audio_info_req->line_max_level = MIXART_FLOAT_P_22_0_TO_HEX; 156 audio_info_req->micro_max_level = MIXART_FLOAT_M_20_0_TO_HEX; 157 audio_info_req->cd_max_level = MIXART_FLOAT____0_0_TO_HEX; 158 159 request.message_id = MSG_SYSTEM_ENUM_PLAY_CONNECTOR; 160 request.uid = (struct mixart_uid){0,0}; /* board num = 0 */ 161 request.data = NULL; 162 request.size = 0; 163 164 err = snd_mixart_send_msg(mgr, &request, sizeof(*connector), connector); 165 if((err < 0) || (connector->error_code) || (connector->uid_count > MIXART_MAX_PHYS_CONNECTORS)) { 166 snd_printk(KERN_ERR "error MSG_SYSTEM_ENUM_PLAY_CONNECTOR\n"); 167 err = -EINVAL; 168 goto __error; 169 } 170 171 for(k=0; k < connector->uid_count; k++) { 172 struct mixart_pipe *pipe; 173 174 if(k < MIXART_FIRST_DIG_AUDIO_ID) { 175 pipe = &mgr->chip[k/2]->pipe_out_ana; 176 } else { 177 pipe = &mgr->chip[(k-MIXART_FIRST_DIG_AUDIO_ID)/2]->pipe_out_dig; 178 } 179 if(k & 1) { 180 pipe->uid_right_connector = connector->uid[k]; /* odd */ 181 } else { 182 pipe->uid_left_connector = connector->uid[k]; /* even */ 183 } 184 185 /* snd_printk(KERN_DEBUG "playback connector[%d].object_id = %x\n", k, connector->uid[k].object_id); */ 186 187 /* TODO: really need send_msg MSG_CONNECTOR_GET_AUDIO_INFO for each connector ? perhaps for analog level caps ? */ 188 request.message_id = MSG_CONNECTOR_GET_AUDIO_INFO; 189 request.uid = connector->uid[k]; 190 request.data = audio_info_req; 191 request.size = sizeof(*audio_info_req); 192 193 err = snd_mixart_send_msg(mgr, &request, sizeof(*audio_info), audio_info); 194 if( err < 0 ) { 195 snd_printk(KERN_ERR "error MSG_CONNECTOR_GET_AUDIO_INFO\n"); 196 goto __error; 197 } 198 /*snd_printk(KERN_DEBUG "play analog_info.analog_level_present = %x\n", audio_info->info.analog_info.analog_level_present);*/ 199 } 200 201 request.message_id = MSG_SYSTEM_ENUM_RECORD_CONNECTOR; 202 request.uid = (struct mixart_uid){0,0}; /* board num = 0 */ 203 request.data = NULL; 204 request.size = 0; 205 206 err = snd_mixart_send_msg(mgr, &request, sizeof(*connector), connector); 207 if((err < 0) || (connector->error_code) || (connector->uid_count > MIXART_MAX_PHYS_CONNECTORS)) { 208 snd_printk(KERN_ERR "error MSG_SYSTEM_ENUM_RECORD_CONNECTOR\n"); 209 err = -EINVAL; 210 goto __error; 211 } 212 213 for(k=0; k < connector->uid_count; k++) { 214 struct mixart_pipe *pipe; 215 216 if(k < MIXART_FIRST_DIG_AUDIO_ID) { 217 pipe = &mgr->chip[k/2]->pipe_in_ana; 218 } else { 219 pipe = &mgr->chip[(k-MIXART_FIRST_DIG_AUDIO_ID)/2]->pipe_in_dig; 220 } 221 if(k & 1) { 222 pipe->uid_right_connector = connector->uid[k]; /* odd */ 223 } else { 224 pipe->uid_left_connector = connector->uid[k]; /* even */ 225 } 226 227 /* snd_printk(KERN_DEBUG "capture connector[%d].object_id = %x\n", k, connector->uid[k].object_id); */ 228 229 /* TODO: really need send_msg MSG_CONNECTOR_GET_AUDIO_INFO for each connector ? perhaps for analog level caps ? */ 230 request.message_id = MSG_CONNECTOR_GET_AUDIO_INFO; 231 request.uid = connector->uid[k]; 232 request.data = audio_info_req; 233 request.size = sizeof(*audio_info_req); 234 235 err = snd_mixart_send_msg(mgr, &request, sizeof(*audio_info), audio_info); 236 if( err < 0 ) { 237 snd_printk(KERN_ERR "error MSG_CONNECTOR_GET_AUDIO_INFO\n"); 238 goto __error; 239 } 240 /*snd_printk(KERN_DEBUG "rec analog_info.analog_level_present = %x\n", audio_info->info.analog_info.analog_level_present);*/ 241 } 242 err = 0; 243 244 __error: 245 kfree(connector); 246 kfree(audio_info_req); 247 kfree(audio_info); 248 249 return err; 250 } 251 252 static int mixart_enum_physio(struct mixart_mgr *mgr) 253 { 254 u32 k; 255 int err; 256 struct mixart_msg request; 257 struct mixart_uid get_console_mgr; 258 struct mixart_return_uid console_mgr; 259 struct mixart_uid_enumeration phys_io; 260 261 /* get the uid for the console manager */ 262 get_console_mgr.object_id = 0; 263 get_console_mgr.desc = MSG_CONSOLE_MANAGER | 0; /* cardindex = 0 */ 264 265 request.message_id = MSG_CONSOLE_GET_CLOCK_UID; 266 request.uid = get_console_mgr; 267 request.data = &get_console_mgr; 268 request.size = sizeof(get_console_mgr); 269 270 err = snd_mixart_send_msg(mgr, &request, sizeof(console_mgr), &console_mgr); 271 272 if( (err < 0) || (console_mgr.error_code != 0) ) { 273 snd_printk(KERN_DEBUG "error MSG_CONSOLE_GET_CLOCK_UID : err=%x\n", console_mgr.error_code); 274 return -EINVAL; 275 } 276 277 /* used later for clock issues ! */ 278 mgr->uid_console_manager = console_mgr.uid; 279 280 request.message_id = MSG_SYSTEM_ENUM_PHYSICAL_IO; 281 request.uid = (struct mixart_uid){0,0}; 282 request.data = &console_mgr.uid; 283 request.size = sizeof(console_mgr.uid); 284 285 err = snd_mixart_send_msg(mgr, &request, sizeof(phys_io), &phys_io); 286 if( (err < 0) || ( phys_io.error_code != 0 ) ) { 287 snd_printk(KERN_ERR "error MSG_SYSTEM_ENUM_PHYSICAL_IO err(%x) error_code(%x)\n", err, phys_io.error_code ); 288 return -EINVAL; 289 } 290 291 /* min 2 phys io per card (analog in + analog out) */ 292 if (phys_io.nb_uid < MIXART_MAX_CARDS * 2) 293 return -EINVAL; 294 295 for(k=0; k<mgr->num_cards; k++) { 296 mgr->chip[k]->uid_in_analog_physio = phys_io.uid[k]; 297 mgr->chip[k]->uid_out_analog_physio = phys_io.uid[phys_io.nb_uid/2 + k]; 298 } 299 300 return 0; 301 } 302 303 304 static int mixart_first_init(struct mixart_mgr *mgr) 305 { 306 u32 k; 307 int err; 308 struct mixart_msg request; 309 310 if((err = mixart_enum_connectors(mgr)) < 0) return err; 311 312 if((err = mixart_enum_physio(mgr)) < 0) return err; 313 314 /* send a synchro command to card (necessary to do this before first MSG_STREAM_START_STREAM_GRP_PACKET) */ 315 /* though why not here */ 316 request.message_id = MSG_SYSTEM_SEND_SYNCHRO_CMD; 317 request.uid = (struct mixart_uid){0,0}; 318 request.data = NULL; 319 request.size = 0; 320 /* this command has no data. response is a 32 bit status */ 321 err = snd_mixart_send_msg(mgr, &request, sizeof(k), &k); 322 if( (err < 0) || (k != 0) ) { 323 snd_printk(KERN_ERR "error MSG_SYSTEM_SEND_SYNCHRO_CMD\n"); 324 return err == 0 ? -EINVAL : err; 325 } 326 327 return 0; 328 } 329 330 331 /* firmware base addresses (when hard coded) */ 332 #define MIXART_MOTHERBOARD_XLX_BASE_ADDRESS 0x00600000 333 334 static int mixart_dsp_load(struct mixart_mgr* mgr, int index, const struct firmware *dsp) 335 { 336 int err, card_index; 337 u32 status_xilinx, status_elf, status_daught; 338 u32 val; 339 340 /* read motherboard xilinx status */ 341 status_xilinx = readl_be( MIXART_MEM( mgr,MIXART_PSEUDOREG_MXLX_STATUS_OFFSET )); 342 /* read elf status */ 343 status_elf = readl_be( MIXART_MEM( mgr,MIXART_PSEUDOREG_ELF_STATUS_OFFSET )); 344 /* read daughterboard xilinx status */ 345 status_daught = readl_be( MIXART_MEM( mgr,MIXART_PSEUDOREG_DXLX_STATUS_OFFSET )); 346 347 /* motherboard xilinx status 5 will say that the board is performing a reset */ 348 if (status_xilinx == 5) { 349 snd_printk(KERN_ERR "miXart is resetting !\n"); 350 return -EAGAIN; /* try again later */ 351 } 352 353 switch (index) { 354 case MIXART_MOTHERBOARD_XLX_INDEX: 355 356 /* xilinx already loaded ? */ 357 if (status_xilinx == 4) { 358 snd_printk(KERN_DEBUG "xilinx is already loaded !\n"); 359 return 0; 360 } 361 /* the status should be 0 == "idle" */ 362 if (status_xilinx != 0) { 363 snd_printk(KERN_ERR "xilinx load error ! status = %d\n", 364 status_xilinx); 365 return -EIO; /* modprob -r may help ? */ 366 } 367 368 /* check xilinx validity */ 369 if (((u32*)(dsp->data))[0] == 0xffffffff) 370 return -EINVAL; 371 if (dsp->size % 4) 372 return -EINVAL; 373 374 /* set xilinx status to copying */ 375 writel_be( 1, MIXART_MEM( mgr, MIXART_PSEUDOREG_MXLX_STATUS_OFFSET )); 376 377 /* setup xilinx base address */ 378 writel_be( MIXART_MOTHERBOARD_XLX_BASE_ADDRESS, MIXART_MEM( mgr,MIXART_PSEUDOREG_MXLX_BASE_ADDR_OFFSET )); 379 /* setup code size for xilinx file */ 380 writel_be( dsp->size, MIXART_MEM( mgr, MIXART_PSEUDOREG_MXLX_SIZE_OFFSET )); 381 382 /* copy xilinx code */ 383 memcpy_toio( MIXART_MEM( mgr, MIXART_MOTHERBOARD_XLX_BASE_ADDRESS), dsp->data, dsp->size); 384 385 /* set xilinx status to copy finished */ 386 writel_be( 2, MIXART_MEM( mgr, MIXART_PSEUDOREG_MXLX_STATUS_OFFSET )); 387 388 /* return, because no further processing needed */ 389 return 0; 390 391 case MIXART_MOTHERBOARD_ELF_INDEX: 392 393 if (status_elf == 4) { 394 snd_printk(KERN_DEBUG "elf file already loaded !\n"); 395 return 0; 396 } 397 398 /* the status should be 0 == "idle" */ 399 if (status_elf != 0) { 400 snd_printk(KERN_ERR "elf load error ! status = %d\n", 401 status_elf); 402 return -EIO; /* modprob -r may help ? */ 403 } 404 405 /* wait for xilinx status == 4 */ 406 err = mixart_wait_nice_for_register_value( mgr, MIXART_PSEUDOREG_MXLX_STATUS_OFFSET, 1, 4, 500); /* 5sec */ 407 if (err < 0) { 408 snd_printk(KERN_ERR "xilinx was not loaded or " 409 "could not be started\n"); 410 return err; 411 } 412 413 /* init some data on the card */ 414 writel_be( 0, MIXART_MEM( mgr, MIXART_PSEUDOREG_BOARDNUMBER ) ); /* set miXart boardnumber to 0 */ 415 writel_be( 0, MIXART_MEM( mgr, MIXART_FLOWTABLE_PTR ) ); /* reset pointer to flow table on miXart */ 416 417 /* set elf status to copying */ 418 writel_be( 1, MIXART_MEM( mgr, MIXART_PSEUDOREG_ELF_STATUS_OFFSET )); 419 420 /* process the copying of the elf packets */ 421 err = mixart_load_elf( mgr, dsp ); 422 if (err < 0) return err; 423 424 /* set elf status to copy finished */ 425 writel_be( 2, MIXART_MEM( mgr, MIXART_PSEUDOREG_ELF_STATUS_OFFSET )); 426 427 /* wait for elf status == 4 */ 428 err = mixart_wait_nice_for_register_value( mgr, MIXART_PSEUDOREG_ELF_STATUS_OFFSET, 1, 4, 300); /* 3sec */ 429 if (err < 0) { 430 snd_printk(KERN_ERR "elf could not be started\n"); 431 return err; 432 } 433 434 /* miXart waits at this point on the pointer to the flow table */ 435 writel_be( (u32)mgr->flowinfo.addr, MIXART_MEM( mgr, MIXART_FLOWTABLE_PTR ) ); /* give pointer of flow table to miXart */ 436 437 return 0; /* return, another xilinx file has to be loaded before */ 438 439 case MIXART_AESEBUBOARD_XLX_INDEX: 440 default: 441 442 /* elf and xilinx should be loaded */ 443 if (status_elf != 4 || status_xilinx != 4) { 444 printk(KERN_ERR "xilinx or elf not " 445 "successfully loaded\n"); 446 return -EIO; /* modprob -r may help ? */ 447 } 448 449 /* wait for daughter detection != 0 */ 450 err = mixart_wait_nice_for_register_value( mgr, MIXART_PSEUDOREG_DBRD_PRESENCE_OFFSET, 0, 0, 30); /* 300msec */ 451 if (err < 0) { 452 snd_printk(KERN_ERR "error starting elf file\n"); 453 return err; 454 } 455 456 /* the board type can now be retrieved */ 457 mgr->board_type = (DAUGHTER_TYPE_MASK & readl_be( MIXART_MEM( mgr, MIXART_PSEUDOREG_DBRD_TYPE_OFFSET))); 458 459 if (mgr->board_type == MIXART_DAUGHTER_TYPE_NONE) 460 break; /* no daughter board; the file does not have to be loaded, continue after the switch */ 461 462 /* only if aesebu daughter board presence (elf code must run) */ 463 if (mgr->board_type != MIXART_DAUGHTER_TYPE_AES ) 464 return -EINVAL; 465 466 /* daughter should be idle */ 467 if (status_daught != 0) { 468 printk(KERN_ERR "daughter load error ! status = %d\n", 469 status_daught); 470 return -EIO; /* modprob -r may help ? */ 471 } 472 473 /* check daughterboard xilinx validity */ 474 if (((u32*)(dsp->data))[0] == 0xffffffff) 475 return -EINVAL; 476 if (dsp->size % 4) 477 return -EINVAL; 478 479 /* inform mixart about the size of the file */ 480 writel_be( dsp->size, MIXART_MEM( mgr, MIXART_PSEUDOREG_DXLX_SIZE_OFFSET )); 481 482 /* set daughterboard status to 1 */ 483 writel_be( 1, MIXART_MEM( mgr, MIXART_PSEUDOREG_DXLX_STATUS_OFFSET )); 484 485 /* wait for status == 2 */ 486 err = mixart_wait_nice_for_register_value( mgr, MIXART_PSEUDOREG_DXLX_STATUS_OFFSET, 1, 2, 30); /* 300msec */ 487 if (err < 0) { 488 snd_printk(KERN_ERR "daughter board load error\n"); 489 return err; 490 } 491 492 /* get the address where to write the file */ 493 val = readl_be( MIXART_MEM( mgr, MIXART_PSEUDOREG_DXLX_BASE_ADDR_OFFSET )); 494 if (!val) 495 return -EINVAL; 496 497 /* copy daughterboard xilinx code */ 498 memcpy_toio( MIXART_MEM( mgr, val), dsp->data, dsp->size); 499 500 /* set daughterboard status to 4 */ 501 writel_be( 4, MIXART_MEM( mgr, MIXART_PSEUDOREG_DXLX_STATUS_OFFSET )); 502 503 /* continue with init */ 504 break; 505 } /* end of switch file index*/ 506 507 /* wait for daughter status == 3 */ 508 err = mixart_wait_nice_for_register_value( mgr, MIXART_PSEUDOREG_DXLX_STATUS_OFFSET, 1, 3, 300); /* 3sec */ 509 if (err < 0) { 510 snd_printk(KERN_ERR 511 "daughter board could not be initialised\n"); 512 return err; 513 } 514 515 /* init mailbox (communication with embedded) */ 516 snd_mixart_init_mailbox(mgr); 517 518 /* first communication with embedded */ 519 err = mixart_first_init(mgr); 520 if (err < 0) { 521 snd_printk(KERN_ERR "miXart could not be set up\n"); 522 return err; 523 } 524 525 /* create devices and mixer in accordance with HW options*/ 526 for (card_index = 0; card_index < mgr->num_cards; card_index++) { 527 struct snd_mixart *chip = mgr->chip[card_index]; 528 529 if ((err = snd_mixart_create_pcm(chip)) < 0) 530 return err; 531 532 if (card_index == 0) { 533 if ((err = snd_mixart_create_mixer(chip->mgr)) < 0) 534 return err; 535 } 536 537 if ((err = snd_card_register(chip->card)) < 0) 538 return err; 539 }; 540 541 snd_printdd("miXart firmware downloaded and successfully set up\n"); 542 543 return 0; 544 } 545 546 547 #if defined(CONFIG_FW_LOADER) || defined(CONFIG_FW_LOADER_MODULE) 548 #if !defined(CONFIG_USE_MIXARTLOADER) && !defined(CONFIG_SND_MIXART) /* built-in kernel */ 549 #define SND_MIXART_FW_LOADER /* use the standard firmware loader */ 550 #endif 551 #endif 552 553 #ifdef SND_MIXART_FW_LOADER 554 555 int snd_mixart_setup_firmware(struct mixart_mgr *mgr) 556 { 557 static char *fw_files[3] = { 558 "miXart8.xlx", "miXart8.elf", "miXart8AES.xlx" 559 }; 560 char path[32]; 561 562 const struct firmware *fw_entry; 563 int i, err; 564 565 for (i = 0; i < 3; i++) { 566 sprintf(path, "mixart/%s", fw_files[i]); 567 if (request_firmware(&fw_entry, path, &mgr->pci->dev)) { 568 snd_printk(KERN_ERR "miXart: can't load firmware %s\n", path); 569 return -ENOENT; 570 } 571 /* fake hwdep dsp record */ 572 err = mixart_dsp_load(mgr, i, fw_entry); 573 release_firmware(fw_entry); 574 if (err < 0) 575 return err; 576 mgr->dsp_loaded |= 1 << i; 577 } 578 return 0; 579 } 580 581 MODULE_FIRMWARE("mixart/miXart8.xlx"); 582 MODULE_FIRMWARE("mixart/miXart8.elf"); 583 MODULE_FIRMWARE("mixart/miXart8AES.xlx"); 584 585 #else /* old style firmware loading */ 586 587 /* miXart hwdep interface id string */ 588 #define SND_MIXART_HWDEP_ID "miXart Loader" 589 590 static int mixart_hwdep_dsp_status(struct snd_hwdep *hw, 591 struct snd_hwdep_dsp_status *info) 592 { 593 struct mixart_mgr *mgr = hw->private_data; 594 595 strcpy(info->id, "miXart"); 596 info->num_dsps = MIXART_HARDW_FILES_MAX_INDEX; 597 598 if (mgr->dsp_loaded & (1 << MIXART_MOTHERBOARD_ELF_INDEX)) 599 info->chip_ready = 1; 600 601 info->version = MIXART_DRIVER_VERSION; 602 return 0; 603 } 604 605 static int mixart_hwdep_dsp_load(struct snd_hwdep *hw, 606 struct snd_hwdep_dsp_image *dsp) 607 { 608 struct mixart_mgr* mgr = hw->private_data; 609 struct firmware fw; 610 int err; 611 612 fw.size = dsp->length; 613 fw.data = vmalloc(dsp->length); 614 if (! fw.data) { 615 snd_printk(KERN_ERR "miXart: cannot allocate image size %d\n", 616 (int)dsp->length); 617 return -ENOMEM; 618 } 619 if (copy_from_user((void *) fw.data, dsp->image, dsp->length)) { 620 vfree(fw.data); 621 return -EFAULT; 622 } 623 err = mixart_dsp_load(mgr, dsp->index, &fw); 624 vfree(fw.data); 625 if (err < 0) 626 return err; 627 mgr->dsp_loaded |= 1 << dsp->index; 628 return err; 629 } 630 631 int snd_mixart_setup_firmware(struct mixart_mgr *mgr) 632 { 633 int err; 634 struct snd_hwdep *hw; 635 636 /* only create hwdep interface for first cardX (see "index" module parameter)*/ 637 if ((err = snd_hwdep_new(mgr->chip[0]->card, SND_MIXART_HWDEP_ID, 0, &hw)) < 0) 638 return err; 639 640 hw->iface = SNDRV_HWDEP_IFACE_MIXART; 641 hw->private_data = mgr; 642 hw->ops.dsp_status = mixart_hwdep_dsp_status; 643 hw->ops.dsp_load = mixart_hwdep_dsp_load; 644 hw->exclusive = 1; 645 sprintf(hw->name, SND_MIXART_HWDEP_ID); 646 mgr->dsp_loaded = 0; 647 648 return snd_card_register(mgr->chip[0]->card); 649 } 650 651 #endif /* SND_MIXART_FW_LOADER */ 652