1 /* 2 * Driver for Digigram miXart soundcards 3 * 4 * DSP firmware management 5 * 6 * Copyright (c) 2003 by Digigram <alsa@digigram.com> 7 * 8 * This program is free software; you can redistribute it and/or modify 9 * it under the terms of the GNU General Public License as published by 10 * the Free Software Foundation; either version 2 of the License, or 11 * (at your option) any later version. 12 * 13 * This program is distributed in the hope that it will be useful, 14 * but WITHOUT ANY WARRANTY; without even the implied warranty of 15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 16 * GNU General Public License for more details. 17 * 18 * You should have received a copy of the GNU General Public License 19 * along with this program; if not, write to the Free Software 20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA 21 */ 22 23 #include <linux/interrupt.h> 24 #include <linux/pci.h> 25 #include <linux/firmware.h> 26 #include <linux/vmalloc.h> 27 #include <linux/slab.h> 28 #include <linux/module.h> 29 #include <asm/io.h> 30 #include <sound/core.h> 31 #include "mixart.h" 32 #include "mixart_mixer.h" 33 #include "mixart_core.h" 34 #include "mixart_hwdep.h" 35 36 37 /** 38 * wait for a value on a peudo register, exit with a timeout 39 * 40 * @param mgr pointer to miXart manager structure 41 * @param offset unsigned pseudo_register base + offset of value 42 * @param value value 43 * @param timeout timeout in centisenconds 44 */ 45 static int mixart_wait_nice_for_register_value(struct mixart_mgr *mgr, 46 u32 offset, int is_egal, 47 u32 value, unsigned long timeout) 48 { 49 unsigned long end_time = jiffies + (timeout * HZ / 100); 50 u32 read; 51 52 do { /* we may take too long time in this loop. 53 * so give controls back to kernel if needed. 54 */ 55 cond_resched(); 56 57 read = readl_be( MIXART_MEM( mgr, offset )); 58 if(is_egal) { 59 if(read == value) return 0; 60 } 61 else { /* wait for different value */ 62 if(read != value) return 0; 63 } 64 } while ( time_after_eq(end_time, jiffies) ); 65 66 return -EBUSY; 67 } 68 69 70 /* 71 structures needed to upload elf code packets 72 */ 73 struct snd_mixart_elf32_ehdr { 74 u8 e_ident[16]; 75 u16 e_type; 76 u16 e_machine; 77 u32 e_version; 78 u32 e_entry; 79 u32 e_phoff; 80 u32 e_shoff; 81 u32 e_flags; 82 u16 e_ehsize; 83 u16 e_phentsize; 84 u16 e_phnum; 85 u16 e_shentsize; 86 u16 e_shnum; 87 u16 e_shstrndx; 88 }; 89 90 struct snd_mixart_elf32_phdr { 91 u32 p_type; 92 u32 p_offset; 93 u32 p_vaddr; 94 u32 p_paddr; 95 u32 p_filesz; 96 u32 p_memsz; 97 u32 p_flags; 98 u32 p_align; 99 }; 100 101 static int mixart_load_elf(struct mixart_mgr *mgr, const struct firmware *dsp ) 102 { 103 char elf32_magic_number[4] = {0x7f,'E','L','F'}; 104 struct snd_mixart_elf32_ehdr *elf_header; 105 int i; 106 107 elf_header = (struct snd_mixart_elf32_ehdr *)dsp->data; 108 for( i=0; i<4; i++ ) 109 if ( elf32_magic_number[i] != elf_header->e_ident[i] ) 110 return -EINVAL; 111 112 if( elf_header->e_phoff != 0 ) { 113 struct snd_mixart_elf32_phdr elf_programheader; 114 115 for( i=0; i < be16_to_cpu(elf_header->e_phnum); i++ ) { 116 u32 pos = be32_to_cpu(elf_header->e_phoff) + (u32)(i * be16_to_cpu(elf_header->e_phentsize)); 117 118 memcpy( &elf_programheader, dsp->data + pos, sizeof(elf_programheader) ); 119 120 if(elf_programheader.p_type != 0) { 121 if( elf_programheader.p_filesz != 0 ) { 122 memcpy_toio( MIXART_MEM( mgr, be32_to_cpu(elf_programheader.p_vaddr)), 123 dsp->data + be32_to_cpu( elf_programheader.p_offset ), 124 be32_to_cpu( elf_programheader.p_filesz )); 125 } 126 } 127 } 128 } 129 return 0; 130 } 131 132 /* 133 * get basic information and init miXart 134 */ 135 136 /* audio IDs for request to the board */ 137 #define MIXART_FIRST_ANA_AUDIO_ID 0 138 #define MIXART_FIRST_DIG_AUDIO_ID 8 139 140 static int mixart_enum_connectors(struct mixart_mgr *mgr) 141 { 142 u32 k; 143 int err; 144 struct mixart_msg request; 145 struct mixart_enum_connector_resp *connector; 146 struct mixart_audio_info_req *audio_info_req; 147 struct mixart_audio_info_resp *audio_info; 148 149 connector = kmalloc(sizeof(*connector), GFP_KERNEL); 150 audio_info_req = kmalloc(sizeof(*audio_info_req), GFP_KERNEL); 151 audio_info = kmalloc(sizeof(*audio_info), GFP_KERNEL); 152 if (! connector || ! audio_info_req || ! audio_info) { 153 err = -ENOMEM; 154 goto __error; 155 } 156 157 audio_info_req->line_max_level = MIXART_FLOAT_P_22_0_TO_HEX; 158 audio_info_req->micro_max_level = MIXART_FLOAT_M_20_0_TO_HEX; 159 audio_info_req->cd_max_level = MIXART_FLOAT____0_0_TO_HEX; 160 161 request.message_id = MSG_SYSTEM_ENUM_PLAY_CONNECTOR; 162 request.uid = (struct mixart_uid){0,0}; /* board num = 0 */ 163 request.data = NULL; 164 request.size = 0; 165 166 err = snd_mixart_send_msg(mgr, &request, sizeof(*connector), connector); 167 if((err < 0) || (connector->error_code) || (connector->uid_count > MIXART_MAX_PHYS_CONNECTORS)) { 168 snd_printk(KERN_ERR "error MSG_SYSTEM_ENUM_PLAY_CONNECTOR\n"); 169 err = -EINVAL; 170 goto __error; 171 } 172 173 for(k=0; k < connector->uid_count; k++) { 174 struct mixart_pipe *pipe; 175 176 if(k < MIXART_FIRST_DIG_AUDIO_ID) { 177 pipe = &mgr->chip[k/2]->pipe_out_ana; 178 } else { 179 pipe = &mgr->chip[(k-MIXART_FIRST_DIG_AUDIO_ID)/2]->pipe_out_dig; 180 } 181 if(k & 1) { 182 pipe->uid_right_connector = connector->uid[k]; /* odd */ 183 } else { 184 pipe->uid_left_connector = connector->uid[k]; /* even */ 185 } 186 187 /* snd_printk(KERN_DEBUG "playback connector[%d].object_id = %x\n", k, connector->uid[k].object_id); */ 188 189 /* TODO: really need send_msg MSG_CONNECTOR_GET_AUDIO_INFO for each connector ? perhaps for analog level caps ? */ 190 request.message_id = MSG_CONNECTOR_GET_AUDIO_INFO; 191 request.uid = connector->uid[k]; 192 request.data = audio_info_req; 193 request.size = sizeof(*audio_info_req); 194 195 err = snd_mixart_send_msg(mgr, &request, sizeof(*audio_info), audio_info); 196 if( err < 0 ) { 197 snd_printk(KERN_ERR "error MSG_CONNECTOR_GET_AUDIO_INFO\n"); 198 goto __error; 199 } 200 /*snd_printk(KERN_DEBUG "play analog_info.analog_level_present = %x\n", audio_info->info.analog_info.analog_level_present);*/ 201 } 202 203 request.message_id = MSG_SYSTEM_ENUM_RECORD_CONNECTOR; 204 request.uid = (struct mixart_uid){0,0}; /* board num = 0 */ 205 request.data = NULL; 206 request.size = 0; 207 208 err = snd_mixart_send_msg(mgr, &request, sizeof(*connector), connector); 209 if((err < 0) || (connector->error_code) || (connector->uid_count > MIXART_MAX_PHYS_CONNECTORS)) { 210 snd_printk(KERN_ERR "error MSG_SYSTEM_ENUM_RECORD_CONNECTOR\n"); 211 err = -EINVAL; 212 goto __error; 213 } 214 215 for(k=0; k < connector->uid_count; k++) { 216 struct mixart_pipe *pipe; 217 218 if(k < MIXART_FIRST_DIG_AUDIO_ID) { 219 pipe = &mgr->chip[k/2]->pipe_in_ana; 220 } else { 221 pipe = &mgr->chip[(k-MIXART_FIRST_DIG_AUDIO_ID)/2]->pipe_in_dig; 222 } 223 if(k & 1) { 224 pipe->uid_right_connector = connector->uid[k]; /* odd */ 225 } else { 226 pipe->uid_left_connector = connector->uid[k]; /* even */ 227 } 228 229 /* snd_printk(KERN_DEBUG "capture connector[%d].object_id = %x\n", k, connector->uid[k].object_id); */ 230 231 /* TODO: really need send_msg MSG_CONNECTOR_GET_AUDIO_INFO for each connector ? perhaps for analog level caps ? */ 232 request.message_id = MSG_CONNECTOR_GET_AUDIO_INFO; 233 request.uid = connector->uid[k]; 234 request.data = audio_info_req; 235 request.size = sizeof(*audio_info_req); 236 237 err = snd_mixart_send_msg(mgr, &request, sizeof(*audio_info), audio_info); 238 if( err < 0 ) { 239 snd_printk(KERN_ERR "error MSG_CONNECTOR_GET_AUDIO_INFO\n"); 240 goto __error; 241 } 242 /*snd_printk(KERN_DEBUG "rec analog_info.analog_level_present = %x\n", audio_info->info.analog_info.analog_level_present);*/ 243 } 244 err = 0; 245 246 __error: 247 kfree(connector); 248 kfree(audio_info_req); 249 kfree(audio_info); 250 251 return err; 252 } 253 254 static int mixart_enum_physio(struct mixart_mgr *mgr) 255 { 256 u32 k; 257 int err; 258 struct mixart_msg request; 259 struct mixart_uid get_console_mgr; 260 struct mixart_return_uid console_mgr; 261 struct mixart_uid_enumeration phys_io; 262 263 /* get the uid for the console manager */ 264 get_console_mgr.object_id = 0; 265 get_console_mgr.desc = MSG_CONSOLE_MANAGER | 0; /* cardindex = 0 */ 266 267 request.message_id = MSG_CONSOLE_GET_CLOCK_UID; 268 request.uid = get_console_mgr; 269 request.data = &get_console_mgr; 270 request.size = sizeof(get_console_mgr); 271 272 err = snd_mixart_send_msg(mgr, &request, sizeof(console_mgr), &console_mgr); 273 274 if( (err < 0) || (console_mgr.error_code != 0) ) { 275 snd_printk(KERN_DEBUG "error MSG_CONSOLE_GET_CLOCK_UID : err=%x\n", console_mgr.error_code); 276 return -EINVAL; 277 } 278 279 /* used later for clock issues ! */ 280 mgr->uid_console_manager = console_mgr.uid; 281 282 request.message_id = MSG_SYSTEM_ENUM_PHYSICAL_IO; 283 request.uid = (struct mixart_uid){0,0}; 284 request.data = &console_mgr.uid; 285 request.size = sizeof(console_mgr.uid); 286 287 err = snd_mixart_send_msg(mgr, &request, sizeof(phys_io), &phys_io); 288 if( (err < 0) || ( phys_io.error_code != 0 ) ) { 289 snd_printk(KERN_ERR "error MSG_SYSTEM_ENUM_PHYSICAL_IO err(%x) error_code(%x)\n", err, phys_io.error_code ); 290 return -EINVAL; 291 } 292 293 /* min 2 phys io per card (analog in + analog out) */ 294 if (phys_io.nb_uid < MIXART_MAX_CARDS * 2) 295 return -EINVAL; 296 297 for(k=0; k<mgr->num_cards; k++) { 298 mgr->chip[k]->uid_in_analog_physio = phys_io.uid[k]; 299 mgr->chip[k]->uid_out_analog_physio = phys_io.uid[phys_io.nb_uid/2 + k]; 300 } 301 302 return 0; 303 } 304 305 306 static int mixart_first_init(struct mixart_mgr *mgr) 307 { 308 u32 k; 309 int err; 310 struct mixart_msg request; 311 312 if((err = mixart_enum_connectors(mgr)) < 0) return err; 313 314 if((err = mixart_enum_physio(mgr)) < 0) return err; 315 316 /* send a synchro command to card (necessary to do this before first MSG_STREAM_START_STREAM_GRP_PACKET) */ 317 /* though why not here */ 318 request.message_id = MSG_SYSTEM_SEND_SYNCHRO_CMD; 319 request.uid = (struct mixart_uid){0,0}; 320 request.data = NULL; 321 request.size = 0; 322 /* this command has no data. response is a 32 bit status */ 323 err = snd_mixart_send_msg(mgr, &request, sizeof(k), &k); 324 if( (err < 0) || (k != 0) ) { 325 snd_printk(KERN_ERR "error MSG_SYSTEM_SEND_SYNCHRO_CMD\n"); 326 return err == 0 ? -EINVAL : err; 327 } 328 329 return 0; 330 } 331 332 333 /* firmware base addresses (when hard coded) */ 334 #define MIXART_MOTHERBOARD_XLX_BASE_ADDRESS 0x00600000 335 336 static int mixart_dsp_load(struct mixart_mgr* mgr, int index, const struct firmware *dsp) 337 { 338 int err, card_index; 339 u32 status_xilinx, status_elf, status_daught; 340 u32 val; 341 342 /* read motherboard xilinx status */ 343 status_xilinx = readl_be( MIXART_MEM( mgr,MIXART_PSEUDOREG_MXLX_STATUS_OFFSET )); 344 /* read elf status */ 345 status_elf = readl_be( MIXART_MEM( mgr,MIXART_PSEUDOREG_ELF_STATUS_OFFSET )); 346 /* read daughterboard xilinx status */ 347 status_daught = readl_be( MIXART_MEM( mgr,MIXART_PSEUDOREG_DXLX_STATUS_OFFSET )); 348 349 /* motherboard xilinx status 5 will say that the board is performing a reset */ 350 if (status_xilinx == 5) { 351 snd_printk(KERN_ERR "miXart is resetting !\n"); 352 return -EAGAIN; /* try again later */ 353 } 354 355 switch (index) { 356 case MIXART_MOTHERBOARD_XLX_INDEX: 357 358 /* xilinx already loaded ? */ 359 if (status_xilinx == 4) { 360 snd_printk(KERN_DEBUG "xilinx is already loaded !\n"); 361 return 0; 362 } 363 /* the status should be 0 == "idle" */ 364 if (status_xilinx != 0) { 365 snd_printk(KERN_ERR "xilinx load error ! status = %d\n", 366 status_xilinx); 367 return -EIO; /* modprob -r may help ? */ 368 } 369 370 /* check xilinx validity */ 371 if (((u32*)(dsp->data))[0] == 0xffffffff) 372 return -EINVAL; 373 if (dsp->size % 4) 374 return -EINVAL; 375 376 /* set xilinx status to copying */ 377 writel_be( 1, MIXART_MEM( mgr, MIXART_PSEUDOREG_MXLX_STATUS_OFFSET )); 378 379 /* setup xilinx base address */ 380 writel_be( MIXART_MOTHERBOARD_XLX_BASE_ADDRESS, MIXART_MEM( mgr,MIXART_PSEUDOREG_MXLX_BASE_ADDR_OFFSET )); 381 /* setup code size for xilinx file */ 382 writel_be( dsp->size, MIXART_MEM( mgr, MIXART_PSEUDOREG_MXLX_SIZE_OFFSET )); 383 384 /* copy xilinx code */ 385 memcpy_toio( MIXART_MEM( mgr, MIXART_MOTHERBOARD_XLX_BASE_ADDRESS), dsp->data, dsp->size); 386 387 /* set xilinx status to copy finished */ 388 writel_be( 2, MIXART_MEM( mgr, MIXART_PSEUDOREG_MXLX_STATUS_OFFSET )); 389 390 /* return, because no further processing needed */ 391 return 0; 392 393 case MIXART_MOTHERBOARD_ELF_INDEX: 394 395 if (status_elf == 4) { 396 snd_printk(KERN_DEBUG "elf file already loaded !\n"); 397 return 0; 398 } 399 400 /* the status should be 0 == "idle" */ 401 if (status_elf != 0) { 402 snd_printk(KERN_ERR "elf load error ! status = %d\n", 403 status_elf); 404 return -EIO; /* modprob -r may help ? */ 405 } 406 407 /* wait for xilinx status == 4 */ 408 err = mixart_wait_nice_for_register_value( mgr, MIXART_PSEUDOREG_MXLX_STATUS_OFFSET, 1, 4, 500); /* 5sec */ 409 if (err < 0) { 410 snd_printk(KERN_ERR "xilinx was not loaded or " 411 "could not be started\n"); 412 return err; 413 } 414 415 /* init some data on the card */ 416 writel_be( 0, MIXART_MEM( mgr, MIXART_PSEUDOREG_BOARDNUMBER ) ); /* set miXart boardnumber to 0 */ 417 writel_be( 0, MIXART_MEM( mgr, MIXART_FLOWTABLE_PTR ) ); /* reset pointer to flow table on miXart */ 418 419 /* set elf status to copying */ 420 writel_be( 1, MIXART_MEM( mgr, MIXART_PSEUDOREG_ELF_STATUS_OFFSET )); 421 422 /* process the copying of the elf packets */ 423 err = mixart_load_elf( mgr, dsp ); 424 if (err < 0) return err; 425 426 /* set elf status to copy finished */ 427 writel_be( 2, MIXART_MEM( mgr, MIXART_PSEUDOREG_ELF_STATUS_OFFSET )); 428 429 /* wait for elf status == 4 */ 430 err = mixart_wait_nice_for_register_value( mgr, MIXART_PSEUDOREG_ELF_STATUS_OFFSET, 1, 4, 300); /* 3sec */ 431 if (err < 0) { 432 snd_printk(KERN_ERR "elf could not be started\n"); 433 return err; 434 } 435 436 /* miXart waits at this point on the pointer to the flow table */ 437 writel_be( (u32)mgr->flowinfo.addr, MIXART_MEM( mgr, MIXART_FLOWTABLE_PTR ) ); /* give pointer of flow table to miXart */ 438 439 return 0; /* return, another xilinx file has to be loaded before */ 440 441 case MIXART_AESEBUBOARD_XLX_INDEX: 442 default: 443 444 /* elf and xilinx should be loaded */ 445 if (status_elf != 4 || status_xilinx != 4) { 446 printk(KERN_ERR "xilinx or elf not " 447 "successfully loaded\n"); 448 return -EIO; /* modprob -r may help ? */ 449 } 450 451 /* wait for daughter detection != 0 */ 452 err = mixart_wait_nice_for_register_value( mgr, MIXART_PSEUDOREG_DBRD_PRESENCE_OFFSET, 0, 0, 30); /* 300msec */ 453 if (err < 0) { 454 snd_printk(KERN_ERR "error starting elf file\n"); 455 return err; 456 } 457 458 /* the board type can now be retrieved */ 459 mgr->board_type = (DAUGHTER_TYPE_MASK & readl_be( MIXART_MEM( mgr, MIXART_PSEUDOREG_DBRD_TYPE_OFFSET))); 460 461 if (mgr->board_type == MIXART_DAUGHTER_TYPE_NONE) 462 break; /* no daughter board; the file does not have to be loaded, continue after the switch */ 463 464 /* only if aesebu daughter board presence (elf code must run) */ 465 if (mgr->board_type != MIXART_DAUGHTER_TYPE_AES ) 466 return -EINVAL; 467 468 /* daughter should be idle */ 469 if (status_daught != 0) { 470 printk(KERN_ERR "daughter load error ! status = %d\n", 471 status_daught); 472 return -EIO; /* modprob -r may help ? */ 473 } 474 475 /* check daughterboard xilinx validity */ 476 if (((u32*)(dsp->data))[0] == 0xffffffff) 477 return -EINVAL; 478 if (dsp->size % 4) 479 return -EINVAL; 480 481 /* inform mixart about the size of the file */ 482 writel_be( dsp->size, MIXART_MEM( mgr, MIXART_PSEUDOREG_DXLX_SIZE_OFFSET )); 483 484 /* set daughterboard status to 1 */ 485 writel_be( 1, MIXART_MEM( mgr, MIXART_PSEUDOREG_DXLX_STATUS_OFFSET )); 486 487 /* wait for status == 2 */ 488 err = mixart_wait_nice_for_register_value( mgr, MIXART_PSEUDOREG_DXLX_STATUS_OFFSET, 1, 2, 30); /* 300msec */ 489 if (err < 0) { 490 snd_printk(KERN_ERR "daughter board load error\n"); 491 return err; 492 } 493 494 /* get the address where to write the file */ 495 val = readl_be( MIXART_MEM( mgr, MIXART_PSEUDOREG_DXLX_BASE_ADDR_OFFSET )); 496 if (!val) 497 return -EINVAL; 498 499 /* copy daughterboard xilinx code */ 500 memcpy_toio( MIXART_MEM( mgr, val), dsp->data, dsp->size); 501 502 /* set daughterboard status to 4 */ 503 writel_be( 4, MIXART_MEM( mgr, MIXART_PSEUDOREG_DXLX_STATUS_OFFSET )); 504 505 /* continue with init */ 506 break; 507 } /* end of switch file index*/ 508 509 /* wait for daughter status == 3 */ 510 err = mixart_wait_nice_for_register_value( mgr, MIXART_PSEUDOREG_DXLX_STATUS_OFFSET, 1, 3, 300); /* 3sec */ 511 if (err < 0) { 512 snd_printk(KERN_ERR 513 "daughter board could not be initialised\n"); 514 return err; 515 } 516 517 /* init mailbox (communication with embedded) */ 518 snd_mixart_init_mailbox(mgr); 519 520 /* first communication with embedded */ 521 err = mixart_first_init(mgr); 522 if (err < 0) { 523 snd_printk(KERN_ERR "miXart could not be set up\n"); 524 return err; 525 } 526 527 /* create devices and mixer in accordance with HW options*/ 528 for (card_index = 0; card_index < mgr->num_cards; card_index++) { 529 struct snd_mixart *chip = mgr->chip[card_index]; 530 531 if ((err = snd_mixart_create_pcm(chip)) < 0) 532 return err; 533 534 if (card_index == 0) { 535 if ((err = snd_mixart_create_mixer(chip->mgr)) < 0) 536 return err; 537 } 538 539 if ((err = snd_card_register(chip->card)) < 0) 540 return err; 541 }; 542 543 snd_printdd("miXart firmware downloaded and successfully set up\n"); 544 545 return 0; 546 } 547 548 549 #if defined(CONFIG_FW_LOADER) || defined(CONFIG_FW_LOADER_MODULE) 550 #if !defined(CONFIG_USE_MIXARTLOADER) && !defined(CONFIG_SND_MIXART) /* built-in kernel */ 551 #define SND_MIXART_FW_LOADER /* use the standard firmware loader */ 552 #endif 553 #endif 554 555 #ifdef SND_MIXART_FW_LOADER 556 557 int snd_mixart_setup_firmware(struct mixart_mgr *mgr) 558 { 559 static char *fw_files[3] = { 560 "miXart8.xlx", "miXart8.elf", "miXart8AES.xlx" 561 }; 562 char path[32]; 563 564 const struct firmware *fw_entry; 565 int i, err; 566 567 for (i = 0; i < 3; i++) { 568 sprintf(path, "mixart/%s", fw_files[i]); 569 if (request_firmware(&fw_entry, path, &mgr->pci->dev)) { 570 snd_printk(KERN_ERR "miXart: can't load firmware %s\n", path); 571 return -ENOENT; 572 } 573 /* fake hwdep dsp record */ 574 err = mixart_dsp_load(mgr, i, fw_entry); 575 release_firmware(fw_entry); 576 if (err < 0) 577 return err; 578 mgr->dsp_loaded |= 1 << i; 579 } 580 return 0; 581 } 582 583 MODULE_FIRMWARE("mixart/miXart8.xlx"); 584 MODULE_FIRMWARE("mixart/miXart8.elf"); 585 MODULE_FIRMWARE("mixart/miXart8AES.xlx"); 586 587 #else /* old style firmware loading */ 588 589 /* miXart hwdep interface id string */ 590 #define SND_MIXART_HWDEP_ID "miXart Loader" 591 592 static int mixart_hwdep_dsp_status(struct snd_hwdep *hw, 593 struct snd_hwdep_dsp_status *info) 594 { 595 struct mixart_mgr *mgr = hw->private_data; 596 597 strcpy(info->id, "miXart"); 598 info->num_dsps = MIXART_HARDW_FILES_MAX_INDEX; 599 600 if (mgr->dsp_loaded & (1 << MIXART_MOTHERBOARD_ELF_INDEX)) 601 info->chip_ready = 1; 602 603 info->version = MIXART_DRIVER_VERSION; 604 return 0; 605 } 606 607 static int mixart_hwdep_dsp_load(struct snd_hwdep *hw, 608 struct snd_hwdep_dsp_image *dsp) 609 { 610 struct mixart_mgr* mgr = hw->private_data; 611 struct firmware fw; 612 int err; 613 614 fw.size = dsp->length; 615 fw.data = vmalloc(dsp->length); 616 if (! fw.data) { 617 snd_printk(KERN_ERR "miXart: cannot allocate image size %d\n", 618 (int)dsp->length); 619 return -ENOMEM; 620 } 621 if (copy_from_user((void *) fw.data, dsp->image, dsp->length)) { 622 vfree(fw.data); 623 return -EFAULT; 624 } 625 err = mixart_dsp_load(mgr, dsp->index, &fw); 626 vfree(fw.data); 627 if (err < 0) 628 return err; 629 mgr->dsp_loaded |= 1 << dsp->index; 630 return err; 631 } 632 633 int snd_mixart_setup_firmware(struct mixart_mgr *mgr) 634 { 635 int err; 636 struct snd_hwdep *hw; 637 638 /* only create hwdep interface for first cardX (see "index" module parameter)*/ 639 if ((err = snd_hwdep_new(mgr->chip[0]->card, SND_MIXART_HWDEP_ID, 0, &hw)) < 0) 640 return err; 641 642 hw->iface = SNDRV_HWDEP_IFACE_MIXART; 643 hw->private_data = mgr; 644 hw->ops.dsp_status = mixart_hwdep_dsp_status; 645 hw->ops.dsp_load = mixart_hwdep_dsp_load; 646 hw->exclusive = 1; 647 sprintf(hw->name, SND_MIXART_HWDEP_ID); 648 mgr->dsp_loaded = 0; 649 650 return snd_card_register(mgr->chip[0]->card); 651 } 652 653 #endif /* SND_MIXART_FW_LOADER */ 654