1 /* -*- linux-c -*- * 2 * 3 * ALSA driver for the digigram lx6464es interface 4 * adapted upstream headers 5 * 6 * Copyright (c) 2009 Tim Blechmann <tim@klingt.org> 7 * 8 * This program is free software; you can redistribute it and/or modify 9 * it under the terms of the GNU General Public License as published by 10 * the Free Software Foundation; either version 2 of the License, or 11 * (at your option) any later version. 12 * 13 * This program is distributed in the hope that it will be useful, 14 * but WITHOUT ANY WARRANTY; without even the implied warranty of 15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 16 * GNU General Public License for more details. 17 * 18 * You should have received a copy of the GNU General Public License 19 * along with this program; see the file COPYING. If not, write to 20 * the Free Software Foundation, Inc., 59 Temple Place - Suite 330, 21 * Boston, MA 02111-1307, USA. 22 * 23 */ 24 25 #ifndef LX_DEFS_H 26 #define LX_DEFS_H 27 28 /* code adapted from ethersound.h */ 29 #define XES_FREQ_COUNT8_MASK 0x00001FFF /* compteur 25MHz entre 8 ech. */ 30 #define XES_FREQ_COUNT8_44_MIN 0x00001288 /* 25M / 31 * [ 44k - ( 44.1k + 48k ) / 2 ] 32 * * 8 */ 33 #define XES_FREQ_COUNT8_44_MAX 0x000010F0 /* 25M / [ ( 44.1k + 48k ) / 2 ] 34 * * 8 */ 35 #define XES_FREQ_COUNT8_48_MAX 0x00000F08 /* 25M / 36 * [ 48k + ( 44.1k + 48k ) / 2 ] 37 * * 8 */ 38 39 /* code adapted from LXES_registers.h */ 40 41 #define IOCR_OUTPUTS_OFFSET 0 /* (rw) offset for the number of OUTs in the 42 * ConfES register. */ 43 #define IOCR_INPUTS_OFFSET 8 /* (rw) offset for the number of INs in the 44 * ConfES register. */ 45 #define FREQ_RATIO_OFFSET 19 /* (rw) offset for frequency ratio in the 46 * ConfES register. */ 47 #define FREQ_RATIO_SINGLE_MODE 0x01 /* value for single mode frequency ratio: 48 * sample rate = frequency rate. */ 49 50 #define CONFES_READ_PART_MASK 0x00070000 51 #define CONFES_WRITE_PART_MASK 0x00F80000 52 53 /* code adapted from if_drv_mb.h */ 54 55 #define MASK_SYS_STATUS_ERROR (1L << 31) /* events that lead to a PCI irq if 56 * not yet pending */ 57 #define MASK_SYS_STATUS_URUN (1L << 30) 58 #define MASK_SYS_STATUS_ORUN (1L << 29) 59 #define MASK_SYS_STATUS_EOBO (1L << 28) 60 #define MASK_SYS_STATUS_EOBI (1L << 27) 61 #define MASK_SYS_STATUS_FREQ (1L << 26) 62 #define MASK_SYS_STATUS_ESA (1L << 25) /* reserved, this is set by the 63 * XES */ 64 #define MASK_SYS_STATUS_TIMER (1L << 24) 65 66 #define MASK_SYS_ASYNC_EVENTS (MASK_SYS_STATUS_ERROR | \ 67 MASK_SYS_STATUS_URUN | \ 68 MASK_SYS_STATUS_ORUN | \ 69 MASK_SYS_STATUS_EOBO | \ 70 MASK_SYS_STATUS_EOBI | \ 71 MASK_SYS_STATUS_FREQ | \ 72 MASK_SYS_STATUS_ESA) 73 74 #define MASK_SYS_PCI_EVENTS (MASK_SYS_ASYNC_EVENTS | \ 75 MASK_SYS_STATUS_TIMER) 76 77 #define MASK_SYS_TIMER_COUNT 0x0000FFFF 78 79 #define MASK_SYS_STATUS_EOT_PLX (1L << 22) /* event that remains 80 * internal: reserved fo end 81 * of plx dma */ 82 #define MASK_SYS_STATUS_XES (1L << 21) /* event that remains 83 * internal: pending XES 84 * IRQ */ 85 #define MASK_SYS_STATUS_CMD_DONE (1L << 20) /* alternate command 86 * management: notify driver 87 * instead of polling */ 88 89 90 #define MAX_STREAM_BUFFER 5 /* max amount of stream buffers. */ 91 92 #define MICROBLAZE_IBL_MIN 32 93 #define MICROBLAZE_IBL_DEFAULT 128 94 #define MICROBLAZE_IBL_MAX 512 95 /* #define MASK_GRANULARITY (2*MICROBLAZE_IBL_MAX-1) */ 96 97 98 99 /* command opcodes, see reference for details */ 100 101 /* 102 the capture bit position in the object_id field in driver commands 103 depends upon the number of managed channels. For now, 64 IN + 64 OUT are 104 supported. HOwever, the communication protocol forsees 1024 channels, hence 105 bit 10 indicates a capture (input) object). 106 */ 107 #define ID_IS_CAPTURE (1L << 10) 108 #define ID_OFFSET 13 /* object ID is at the 13th bit in the 109 * 1st command word.*/ 110 #define ID_CH_MASK 0x3F 111 #define OPCODE_OFFSET 24 /* offset of the command opcode in the first 112 * command word.*/ 113 114 enum cmd_mb_opcodes { 115 CMD_00_INFO_DEBUG = 0x00, 116 CMD_01_GET_SYS_CFG = 0x01, 117 CMD_02_SET_GRANULARITY = 0x02, 118 CMD_03_SET_TIMER_IRQ = 0x03, 119 CMD_04_GET_EVENT = 0x04, 120 CMD_05_GET_PIPES = 0x05, 121 122 CMD_06_ALLOCATE_PIPE = 0x06, 123 CMD_07_RELEASE_PIPE = 0x07, 124 CMD_08_ASK_BUFFERS = 0x08, 125 CMD_09_STOP_PIPE = 0x09, 126 CMD_0A_GET_PIPE_SPL_COUNT = 0x0a, 127 CMD_0B_TOGGLE_PIPE_STATE = 0x0b, 128 129 CMD_0C_DEF_STREAM = 0x0c, 130 CMD_0D_SET_MUTE = 0x0d, 131 CMD_0E_GET_STREAM_SPL_COUNT = 0x0e, 132 CMD_0F_UPDATE_BUFFER = 0x0f, 133 CMD_10_GET_BUFFER = 0x10, 134 CMD_11_CANCEL_BUFFER = 0x11, 135 CMD_12_GET_PEAK = 0x12, 136 CMD_13_SET_STREAM_STATE = 0x13, 137 CMD_14_INVALID = 0x14, 138 }; 139 140 /* pipe states */ 141 enum pipe_state_t { 142 PSTATE_IDLE = 0, /* the pipe is not processed in the XES_IRQ 143 * (free or stopped, or paused). */ 144 PSTATE_RUN = 1, /* sustained play/record state. */ 145 PSTATE_PURGE = 2, /* the ES channels are now off, render pipes do 146 * not DMA, record pipe do a last DMA. */ 147 PSTATE_ACQUIRE = 3, /* the ES channels are now on, render pipes do 148 * not yet increase their sample count, record 149 * pipes do not DMA. */ 150 PSTATE_CLOSING = 4, /* the pipe is releasing, and may not yet 151 * receive an "alloc" command. */ 152 }; 153 154 /* stream states */ 155 enum stream_state_t { 156 SSTATE_STOP = 0x00, /* setting to stop resets the stream spl 157 * count.*/ 158 SSTATE_RUN = (0x01 << 0), /* start DMA and spl count handling. */ 159 SSTATE_PAUSE = (0x01 << 1), /* pause DMA and spl count handling. */ 160 }; 161 162 /* buffer flags */ 163 enum buffer_flags { 164 BF_VALID = 0x80, /* set if the buffer is valid, clear if free.*/ 165 BF_CURRENT = 0x40, /* set if this is the current buffer (there is 166 * always a current buffer).*/ 167 BF_NOTIFY_EOB = 0x20, /* set if this buffer must cause a PCI event 168 * when finished.*/ 169 BF_CIRCULAR = 0x10, /* set if buffer[1] must be copied to buffer[0] 170 * by the end of this buffer.*/ 171 BF_64BITS_ADR = 0x08, /* set if the hi part of the address is valid.*/ 172 BF_xx = 0x04, /* future extension.*/ 173 BF_EOB = 0x02, /* set if finished, but not yet free.*/ 174 BF_PAUSE = 0x01, /* pause stream at buffer end.*/ 175 BF_ZERO = 0x00, /* no flags (init).*/ 176 }; 177 178 /** 179 * Stream Flags definitions 180 */ 181 enum stream_flags { 182 SF_ZERO = 0x00000000, /* no flags (stream invalid). */ 183 SF_VALID = 0x10000000, /* the stream has a valid DMA_conf 184 * info (setstreamformat). */ 185 SF_XRUN = 0x20000000, /* the stream is un x-run state. */ 186 SF_START = 0x40000000, /* the DMA is running.*/ 187 SF_ASIO = 0x80000000, /* ASIO.*/ 188 }; 189 190 191 #define MASK_SPL_COUNT_HI 0x00FFFFFF /* 4 MSBits are status bits */ 192 #define PSTATE_OFFSET 28 /* 4 MSBits are status bits */ 193 194 195 #define MASK_STREAM_HAS_MAPPING (1L << 12) 196 #define MASK_STREAM_IS_ASIO (1L << 9) 197 #define STREAM_FMT_OFFSET 10 /* the stream fmt bits start at the 10th 198 * bit in the command word. */ 199 200 #define STREAM_FMT_16b 0x02 201 #define STREAM_FMT_intel 0x01 202 203 #define FREQ_FIELD_OFFSET 15 /* offset of the freq field in the response 204 * word */ 205 206 #define BUFF_FLAGS_OFFSET 24 /* offset of the buffer flags in the 207 * response word. */ 208 #define MASK_DATA_SIZE 0x00FFFFFF /* this must match the field size of 209 * datasize in the buffer_t structure. */ 210 211 #define MASK_BUFFER_ID 0xFF /* the cancel command awaits a buffer ID, 212 * may be 0xFF for "current". */ 213 214 215 /* code adapted from PcxErr_e.h */ 216 217 /* Bits masks */ 218 219 #define ERROR_MASK 0x8000 220 221 #define SOURCE_MASK 0x7800 222 223 #define E_SOURCE_BOARD 0x4000 /* 8 >> 1 */ 224 #define E_SOURCE_DRV 0x2000 /* 4 >> 1 */ 225 #define E_SOURCE_API 0x1000 /* 2 >> 1 */ 226 /* Error tools */ 227 #define E_SOURCE_TOOLS 0x0800 /* 1 >> 1 */ 228 /* Error pcxaudio */ 229 #define E_SOURCE_AUDIO 0x1800 /* 3 >> 1 */ 230 /* Error virtual pcx */ 231 #define E_SOURCE_VPCX 0x2800 /* 5 >> 1 */ 232 /* Error dispatcher */ 233 #define E_SOURCE_DISPATCHER 0x3000 /* 6 >> 1 */ 234 /* Error from CobraNet firmware */ 235 #define E_SOURCE_COBRANET 0x3800 /* 7 >> 1 */ 236 237 #define E_SOURCE_USER 0x7800 238 239 #define CLASS_MASK 0x0700 240 241 #define CODE_MASK 0x00FF 242 243 /* Bits values */ 244 245 /* Values for the error/warning bit */ 246 #define ERROR_VALUE 0x8000 247 #define WARNING_VALUE 0x0000 248 249 /* Class values */ 250 #define E_CLASS_GENERAL 0x0000 251 #define E_CLASS_INVALID_CMD 0x0100 252 #define E_CLASS_INVALID_STD_OBJECT 0x0200 253 #define E_CLASS_RSRC_IMPOSSIBLE 0x0300 254 #define E_CLASS_WRONG_CONTEXT 0x0400 255 #define E_CLASS_BAD_SPECIFIC_PARAMETER 0x0500 256 #define E_CLASS_REAL_TIME_ERROR 0x0600 257 #define E_CLASS_DIRECTSHOW 0x0700 258 #define E_CLASS_FREE 0x0700 259 260 261 /* Complete DRV error code for the general class */ 262 #define ED_GN (ERROR_VALUE | E_SOURCE_DRV | E_CLASS_GENERAL) 263 #define ED_CONCURRENCY (ED_GN | 0x01) 264 #define ED_DSP_CRASHED (ED_GN | 0x02) 265 #define ED_UNKNOWN_BOARD (ED_GN | 0x03) 266 #define ED_NOT_INSTALLED (ED_GN | 0x04) 267 #define ED_CANNOT_OPEN_SVC_MANAGER (ED_GN | 0x05) 268 #define ED_CANNOT_READ_REGISTRY (ED_GN | 0x06) 269 #define ED_DSP_VERSION_MISMATCH (ED_GN | 0x07) 270 #define ED_UNAVAILABLE_FEATURE (ED_GN | 0x08) 271 #define ED_CANCELLED (ED_GN | 0x09) 272 #define ED_NO_RESPONSE_AT_IRQA (ED_GN | 0x10) 273 #define ED_INVALID_ADDRESS (ED_GN | 0x11) 274 #define ED_DSP_CORRUPTED (ED_GN | 0x12) 275 #define ED_PENDING_OPERATION (ED_GN | 0x13) 276 #define ED_NET_ALLOCATE_MEMORY_IMPOSSIBLE (ED_GN | 0x14) 277 #define ED_NET_REGISTER_ERROR (ED_GN | 0x15) 278 #define ED_NET_THREAD_ERROR (ED_GN | 0x16) 279 #define ED_NET_OPEN_ERROR (ED_GN | 0x17) 280 #define ED_NET_CLOSE_ERROR (ED_GN | 0x18) 281 #define ED_NET_NO_MORE_PACKET (ED_GN | 0x19) 282 #define ED_NET_NO_MORE_BUFFER (ED_GN | 0x1A) 283 #define ED_NET_SEND_ERROR (ED_GN | 0x1B) 284 #define ED_NET_RECEIVE_ERROR (ED_GN | 0x1C) 285 #define ED_NET_WRONG_MSG_SIZE (ED_GN | 0x1D) 286 #define ED_NET_WAIT_ERROR (ED_GN | 0x1E) 287 #define ED_NET_EEPROM_ERROR (ED_GN | 0x1F) 288 #define ED_INVALID_RS232_COM_NUMBER (ED_GN | 0x20) 289 #define ED_INVALID_RS232_INIT (ED_GN | 0x21) 290 #define ED_FILE_ERROR (ED_GN | 0x22) 291 #define ED_INVALID_GPIO_CMD (ED_GN | 0x23) 292 #define ED_RS232_ALREADY_OPENED (ED_GN | 0x24) 293 #define ED_RS232_NOT_OPENED (ED_GN | 0x25) 294 #define ED_GPIO_ALREADY_OPENED (ED_GN | 0x26) 295 #define ED_GPIO_NOT_OPENED (ED_GN | 0x27) 296 #define ED_REGISTRY_ERROR (ED_GN | 0x28) /* <- NCX */ 297 #define ED_INVALID_SERVICE (ED_GN | 0x29) /* <- NCX */ 298 299 #define ED_READ_FILE_ALREADY_OPENED (ED_GN | 0x2a) /* <- Decalage 300 * pour RCX 301 * (old 0x28) 302 * */ 303 #define ED_READ_FILE_INVALID_COMMAND (ED_GN | 0x2b) /* ~ */ 304 #define ED_READ_FILE_INVALID_PARAMETER (ED_GN | 0x2c) /* ~ */ 305 #define ED_READ_FILE_ALREADY_CLOSED (ED_GN | 0x2d) /* ~ */ 306 #define ED_READ_FILE_NO_INFORMATION (ED_GN | 0x2e) /* ~ */ 307 #define ED_READ_FILE_INVALID_HANDLE (ED_GN | 0x2f) /* ~ */ 308 #define ED_READ_FILE_END_OF_FILE (ED_GN | 0x30) /* ~ */ 309 #define ED_READ_FILE_ERROR (ED_GN | 0x31) /* ~ */ 310 311 #define ED_DSP_CRASHED_EXC_DSPSTACK_OVERFLOW (ED_GN | 0x32) /* <- Decalage pour 312 * PCX (old 0x14) */ 313 #define ED_DSP_CRASHED_EXC_SYSSTACK_OVERFLOW (ED_GN | 0x33) /* ~ */ 314 #define ED_DSP_CRASHED_EXC_ILLEGAL (ED_GN | 0x34) /* ~ */ 315 #define ED_DSP_CRASHED_EXC_TIMER_REENTRY (ED_GN | 0x35) /* ~ */ 316 #define ED_DSP_CRASHED_EXC_FATAL_ERROR (ED_GN | 0x36) /* ~ */ 317 318 #define ED_FLASH_PCCARD_NOT_PRESENT (ED_GN | 0x37) 319 320 #define ED_NO_CURRENT_CLOCK (ED_GN | 0x38) 321 322 /* Complete DRV error code for real time class */ 323 #define ED_RT (ERROR_VALUE | E_SOURCE_DRV | E_CLASS_REAL_TIME_ERROR) 324 #define ED_DSP_TIMED_OUT (ED_RT | 0x01) 325 #define ED_DSP_CHK_TIMED_OUT (ED_RT | 0x02) 326 #define ED_STREAM_OVERRUN (ED_RT | 0x03) 327 #define ED_DSP_BUSY (ED_RT | 0x04) 328 #define ED_DSP_SEMAPHORE_TIME_OUT (ED_RT | 0x05) 329 #define ED_BOARD_TIME_OUT (ED_RT | 0x06) 330 #define ED_XILINX_ERROR (ED_RT | 0x07) 331 #define ED_COBRANET_ITF_NOT_RESPONDING (ED_RT | 0x08) 332 333 /* Complete BOARD error code for the invaid standard object class */ 334 #define EB_ISO (ERROR_VALUE | E_SOURCE_BOARD | \ 335 E_CLASS_INVALID_STD_OBJECT) 336 #define EB_INVALID_EFFECT (EB_ISO | 0x00) 337 #define EB_INVALID_PIPE (EB_ISO | 0x40) 338 #define EB_INVALID_STREAM (EB_ISO | 0x80) 339 #define EB_INVALID_AUDIO (EB_ISO | 0xC0) 340 341 /* Complete BOARD error code for impossible resource allocation class */ 342 #define EB_RI (ERROR_VALUE | E_SOURCE_BOARD | E_CLASS_RSRC_IMPOSSIBLE) 343 #define EB_ALLOCATE_ALL_STREAM_TRANSFERT_BUFFERS_IMPOSSIBLE (EB_RI | 0x01) 344 #define EB_ALLOCATE_PIPE_SAMPLE_BUFFER_IMPOSSIBLE (EB_RI | 0x02) 345 346 #define EB_ALLOCATE_MEM_STREAM_IMPOSSIBLE \ 347 EB_ALLOCATE_ALL_STREAM_TRANSFERT_BUFFERS_IMPOSSIBLE 348 #define EB_ALLOCATE_MEM_PIPE_IMPOSSIBLE \ 349 EB_ALLOCATE_PIPE_SAMPLE_BUFFER_IMPOSSIBLE 350 351 #define EB_ALLOCATE_DIFFERED_CMD_IMPOSSIBLE (EB_RI | 0x03) 352 #define EB_TOO_MANY_DIFFERED_CMD (EB_RI | 0x04) 353 #define EB_RBUFFERS_TABLE_OVERFLOW (EB_RI | 0x05) 354 #define EB_ALLOCATE_EFFECTS_IMPOSSIBLE (EB_RI | 0x08) 355 #define EB_ALLOCATE_EFFECT_POS_IMPOSSIBLE (EB_RI | 0x09) 356 #define EB_RBUFFER_NOT_AVAILABLE (EB_RI | 0x0A) 357 #define EB_ALLOCATE_CONTEXT_LIII_IMPOSSIBLE (EB_RI | 0x0B) 358 #define EB_STATUS_DIALOG_IMPOSSIBLE (EB_RI | 0x1D) 359 #define EB_CONTROL_CMD_IMPOSSIBLE (EB_RI | 0x1E) 360 #define EB_STATUS_SEND_IMPOSSIBLE (EB_RI | 0x1F) 361 #define EB_ALLOCATE_PIPE_IMPOSSIBLE (EB_RI | 0x40) 362 #define EB_ALLOCATE_STREAM_IMPOSSIBLE (EB_RI | 0x80) 363 #define EB_ALLOCATE_AUDIO_IMPOSSIBLE (EB_RI | 0xC0) 364 365 /* Complete BOARD error code for wrong call context class */ 366 #define EB_WCC (ERROR_VALUE | E_SOURCE_BOARD | E_CLASS_WRONG_CONTEXT) 367 #define EB_CMD_REFUSED (EB_WCC | 0x00) 368 #define EB_START_STREAM_REFUSED (EB_WCC | 0xFC) 369 #define EB_SPC_REFUSED (EB_WCC | 0xFD) 370 #define EB_CSN_REFUSED (EB_WCC | 0xFE) 371 #define EB_CSE_REFUSED (EB_WCC | 0xFF) 372 373 374 375 376 #endif /* LX_DEFS_H */ 377