1 /* 2 * ALSA driver for ICEnsemble VT1724 (Envy24HT) 3 * 4 * Lowlevel functions for Infrasonic Quartet 5 * 6 * Copyright (c) 2009 Pavel Hofman <pavel.hofman@ivitera.com> 7 * 8 * 9 * This program is free software; you can redistribute it and/or modify 10 * it under the terms of the GNU General Public License as published by 11 * the Free Software Foundation; either version 2 of the License, or 12 * (at your option) any later version. 13 * 14 * This program is distributed in the hope that it will be useful, 15 * but WITHOUT ANY WARRANTY; without even the implied warranty of 16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 17 * GNU General Public License for more details. 18 * 19 * You should have received a copy of the GNU General Public License 20 * along with this program; if not, write to the Free Software 21 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA 22 * 23 */ 24 25 #include <linux/delay.h> 26 #include <linux/interrupt.h> 27 #include <linux/init.h> 28 #include <linux/slab.h> 29 #include <sound/core.h> 30 #include <sound/tlv.h> 31 #include <sound/info.h> 32 33 #include "ice1712.h" 34 #include "envy24ht.h" 35 #include <sound/ak4113.h> 36 #include "quartet.h" 37 38 struct qtet_spec { 39 struct ak4113 *ak4113; 40 unsigned int scr; /* system control register */ 41 unsigned int mcr; /* monitoring control register */ 42 unsigned int cpld; /* cpld register */ 43 }; 44 45 struct qtet_kcontrol_private { 46 unsigned int bit; 47 void (*set_register)(struct snd_ice1712 *ice, unsigned int val); 48 unsigned int (*get_register)(struct snd_ice1712 *ice); 49 const char * const texts[2]; 50 }; 51 52 enum { 53 IN12_SEL = 0, 54 IN34_SEL, 55 AIN34_SEL, 56 COAX_OUT, 57 IN12_MON12, 58 IN12_MON34, 59 IN34_MON12, 60 IN34_MON34, 61 OUT12_MON34, 62 OUT34_MON12, 63 }; 64 65 static const char * const ext_clock_names[3] = {"IEC958 In", "Word Clock 1xFS", 66 "Word Clock 256xFS"}; 67 68 /* chip address on I2C bus */ 69 #define AK4113_ADDR 0x26 /* S/PDIF receiver */ 70 71 /* chip address on SPI bus */ 72 #define AK4620_ADDR 0x02 /* ADC/DAC */ 73 74 75 /* 76 * GPIO pins 77 */ 78 79 /* GPIO0 - O - DATA0, def. 0 */ 80 #define GPIO_D0 (1<<0) 81 /* GPIO1 - I/O - DATA1, Jack Detect Input0 (0:present, 1:missing), def. 1 */ 82 #define GPIO_D1_JACKDTC0 (1<<1) 83 /* GPIO2 - I/O - DATA2, Jack Detect Input1 (0:present, 1:missing), def. 1 */ 84 #define GPIO_D2_JACKDTC1 (1<<2) 85 /* GPIO3 - I/O - DATA3, def. 1 */ 86 #define GPIO_D3 (1<<3) 87 /* GPIO4 - I/O - DATA4, SPI CDTO, def. 1 */ 88 #define GPIO_D4_SPI_CDTO (1<<4) 89 /* GPIO5 - I/O - DATA5, SPI CCLK, def. 1 */ 90 #define GPIO_D5_SPI_CCLK (1<<5) 91 /* GPIO6 - I/O - DATA6, Cable Detect Input (0:detected, 1:not detected */ 92 #define GPIO_D6_CD (1<<6) 93 /* GPIO7 - I/O - DATA7, Device Detect Input (0:detected, 1:not detected */ 94 #define GPIO_D7_DD (1<<7) 95 /* GPIO8 - O - CPLD Chip Select, def. 1 */ 96 #define GPIO_CPLD_CSN (1<<8) 97 /* GPIO9 - O - CPLD register read/write (0:write, 1:read), def. 0 */ 98 #define GPIO_CPLD_RW (1<<9) 99 /* GPIO10 - O - SPI Chip Select for CODEC#0, def. 1 */ 100 #define GPIO_SPI_CSN0 (1<<10) 101 /* GPIO11 - O - SPI Chip Select for CODEC#1, def. 1 */ 102 #define GPIO_SPI_CSN1 (1<<11) 103 /* GPIO12 - O - Ex. Register Output Enable (0:enable, 1:disable), def. 1, 104 * init 0 */ 105 #define GPIO_EX_GPIOE (1<<12) 106 /* GPIO13 - O - Ex. Register0 Chip Select for System Control Register, 107 * def. 1 */ 108 #define GPIO_SCR (1<<13) 109 /* GPIO14 - O - Ex. Register1 Chip Select for Monitor Control Register, 110 * def. 1 */ 111 #define GPIO_MCR (1<<14) 112 113 #define GPIO_SPI_ALL (GPIO_D4_SPI_CDTO | GPIO_D5_SPI_CCLK |\ 114 GPIO_SPI_CSN0 | GPIO_SPI_CSN1) 115 116 #define GPIO_DATA_MASK (GPIO_D0 | GPIO_D1_JACKDTC0 | \ 117 GPIO_D2_JACKDTC1 | GPIO_D3 | \ 118 GPIO_D4_SPI_CDTO | GPIO_D5_SPI_CCLK | \ 119 GPIO_D6_CD | GPIO_D7_DD) 120 121 /* System Control Register GPIO_SCR data bits */ 122 /* Mic/Line select relay (0:line, 1:mic) */ 123 #define SCR_RELAY GPIO_D0 124 /* Phantom power drive control (0:5V, 1:48V) */ 125 #define SCR_PHP_V GPIO_D1_JACKDTC0 126 /* H/W mute control (0:Normal, 1:Mute) */ 127 #define SCR_MUTE GPIO_D2_JACKDTC1 128 /* Phantom power control (0:Phantom on, 1:off) */ 129 #define SCR_PHP GPIO_D3 130 /* Analog input 1/2 Source Select */ 131 #define SCR_AIN12_SEL0 GPIO_D4_SPI_CDTO 132 #define SCR_AIN12_SEL1 GPIO_D5_SPI_CCLK 133 /* Analog input 3/4 Source Select (0:line, 1:hi-z) */ 134 #define SCR_AIN34_SEL GPIO_D6_CD 135 /* Codec Power Down (0:power down, 1:normal) */ 136 #define SCR_CODEC_PDN GPIO_D7_DD 137 138 #define SCR_AIN12_LINE (0) 139 #define SCR_AIN12_MIC (SCR_AIN12_SEL0) 140 #define SCR_AIN12_LOWCUT (SCR_AIN12_SEL1 | SCR_AIN12_SEL0) 141 142 /* Monitor Control Register GPIO_MCR data bits */ 143 /* Input 1/2 to Monitor 1/2 (0:off, 1:on) */ 144 #define MCR_IN12_MON12 GPIO_D0 145 /* Input 1/2 to Monitor 3/4 (0:off, 1:on) */ 146 #define MCR_IN12_MON34 GPIO_D1_JACKDTC0 147 /* Input 3/4 to Monitor 1/2 (0:off, 1:on) */ 148 #define MCR_IN34_MON12 GPIO_D2_JACKDTC1 149 /* Input 3/4 to Monitor 3/4 (0:off, 1:on) */ 150 #define MCR_IN34_MON34 GPIO_D3 151 /* Output to Monitor 1/2 (0:off, 1:on) */ 152 #define MCR_OUT34_MON12 GPIO_D4_SPI_CDTO 153 /* Output to Monitor 3/4 (0:off, 1:on) */ 154 #define MCR_OUT12_MON34 GPIO_D5_SPI_CCLK 155 156 /* CPLD Register DATA bits */ 157 /* Clock Rate Select */ 158 #define CPLD_CKS0 GPIO_D0 159 #define CPLD_CKS1 GPIO_D1_JACKDTC0 160 #define CPLD_CKS2 GPIO_D2_JACKDTC1 161 /* Sync Source Select (0:Internal, 1:External) */ 162 #define CPLD_SYNC_SEL GPIO_D3 163 /* Word Clock FS Select (0:FS, 1:256FS) */ 164 #define CPLD_WORD_SEL GPIO_D4_SPI_CDTO 165 /* Coaxial Output Source (IS-Link) (0:SPDIF, 1:I2S) */ 166 #define CPLD_COAX_OUT GPIO_D5_SPI_CCLK 167 /* Input 1/2 Source Select (0:Analog12, 1:An34) */ 168 #define CPLD_IN12_SEL GPIO_D6_CD 169 /* Input 3/4 Source Select (0:Analog34, 1:Digital In) */ 170 #define CPLD_IN34_SEL GPIO_D7_DD 171 172 /* internal clock (CPLD_SYNC_SEL = 0) options */ 173 #define CPLD_CKS_44100HZ (0) 174 #define CPLD_CKS_48000HZ (CPLD_CKS0) 175 #define CPLD_CKS_88200HZ (CPLD_CKS1) 176 #define CPLD_CKS_96000HZ (CPLD_CKS1 | CPLD_CKS0) 177 #define CPLD_CKS_176400HZ (CPLD_CKS2) 178 #define CPLD_CKS_192000HZ (CPLD_CKS2 | CPLD_CKS0) 179 180 #define CPLD_CKS_MASK (CPLD_CKS0 | CPLD_CKS1 | CPLD_CKS2) 181 182 /* external clock (CPLD_SYNC_SEL = 1) options */ 183 /* external clock - SPDIF */ 184 #define CPLD_EXT_SPDIF (0 | CPLD_SYNC_SEL) 185 /* external clock - WordClock 1xfs */ 186 #define CPLD_EXT_WORDCLOCK_1FS (CPLD_CKS1 | CPLD_SYNC_SEL) 187 /* external clock - WordClock 256xfs */ 188 #define CPLD_EXT_WORDCLOCK_256FS (CPLD_CKS1 | CPLD_WORD_SEL |\ 189 CPLD_SYNC_SEL) 190 191 #define EXT_SPDIF_TYPE 0 192 #define EXT_WORDCLOCK_1FS_TYPE 1 193 #define EXT_WORDCLOCK_256FS_TYPE 2 194 195 #define AK4620_DFS0 (1<<0) 196 #define AK4620_DFS1 (1<<1) 197 #define AK4620_CKS0 (1<<2) 198 #define AK4620_CKS1 (1<<3) 199 /* Clock and Format Control register */ 200 #define AK4620_DFS_REG 0x02 201 202 /* Deem and Volume Control register */ 203 #define AK4620_DEEMVOL_REG 0x03 204 #define AK4620_SMUTE (1<<7) 205 206 /* 207 * Conversion from int value to its binary form. Used for debugging. 208 * The output buffer must be allocated prior to calling the function. 209 */ 210 static char *get_binary(char *buffer, int value) 211 { 212 int i, j, pos; 213 pos = 0; 214 for (i = 0; i < 4; ++i) { 215 for (j = 0; j < 8; ++j) { 216 if (value & (1 << (31-(i*8 + j)))) 217 buffer[pos] = '1'; 218 else 219 buffer[pos] = '0'; 220 pos++; 221 } 222 if (i < 3) { 223 buffer[pos] = ' '; 224 pos++; 225 } 226 } 227 buffer[pos] = '\0'; 228 return buffer; 229 } 230 231 /* 232 * Initial setup of the conversion array GPIO <-> rate 233 */ 234 static unsigned int qtet_rates[] = { 235 44100, 48000, 88200, 236 96000, 176400, 192000, 237 }; 238 239 static unsigned int cks_vals[] = { 240 CPLD_CKS_44100HZ, CPLD_CKS_48000HZ, CPLD_CKS_88200HZ, 241 CPLD_CKS_96000HZ, CPLD_CKS_176400HZ, CPLD_CKS_192000HZ, 242 }; 243 244 static struct snd_pcm_hw_constraint_list qtet_rates_info = { 245 .count = ARRAY_SIZE(qtet_rates), 246 .list = qtet_rates, 247 .mask = 0, 248 }; 249 250 static void qtet_ak4113_write(void *private_data, unsigned char reg, 251 unsigned char val) 252 { 253 snd_vt1724_write_i2c((struct snd_ice1712 *)private_data, AK4113_ADDR, 254 reg, val); 255 } 256 257 static unsigned char qtet_ak4113_read(void *private_data, unsigned char reg) 258 { 259 return snd_vt1724_read_i2c((struct snd_ice1712 *)private_data, 260 AK4113_ADDR, reg); 261 } 262 263 264 /* 265 * AK4620 section 266 */ 267 268 /* 269 * Write data to addr register of ak4620 270 */ 271 static void qtet_akm_write(struct snd_akm4xxx *ak, int chip, 272 unsigned char addr, unsigned char data) 273 { 274 unsigned int tmp, orig_dir; 275 int idx; 276 unsigned int addrdata; 277 struct snd_ice1712 *ice = ak->private_data[0]; 278 279 if (snd_BUG_ON(chip < 0 || chip >= 4)) 280 return; 281 /*dev_dbg(ice->card->dev, "Writing to AK4620: chip=%d, addr=0x%x, 282 data=0x%x\n", chip, addr, data);*/ 283 orig_dir = ice->gpio.get_dir(ice); 284 ice->gpio.set_dir(ice, orig_dir | GPIO_SPI_ALL); 285 /* set mask - only SPI bits */ 286 ice->gpio.set_mask(ice, ~GPIO_SPI_ALL); 287 288 tmp = ice->gpio.get_data(ice); 289 /* high all */ 290 tmp |= GPIO_SPI_ALL; 291 ice->gpio.set_data(ice, tmp); 292 udelay(100); 293 /* drop chip select */ 294 if (chip) 295 /* CODEC 1 */ 296 tmp &= ~GPIO_SPI_CSN1; 297 else 298 tmp &= ~GPIO_SPI_CSN0; 299 ice->gpio.set_data(ice, tmp); 300 udelay(100); 301 302 /* build I2C address + data byte */ 303 addrdata = (AK4620_ADDR << 6) | 0x20 | (addr & 0x1f); 304 addrdata = (addrdata << 8) | data; 305 for (idx = 15; idx >= 0; idx--) { 306 /* drop clock */ 307 tmp &= ~GPIO_D5_SPI_CCLK; 308 ice->gpio.set_data(ice, tmp); 309 udelay(100); 310 /* set data */ 311 if (addrdata & (1 << idx)) 312 tmp |= GPIO_D4_SPI_CDTO; 313 else 314 tmp &= ~GPIO_D4_SPI_CDTO; 315 ice->gpio.set_data(ice, tmp); 316 udelay(100); 317 /* raise clock */ 318 tmp |= GPIO_D5_SPI_CCLK; 319 ice->gpio.set_data(ice, tmp); 320 udelay(100); 321 } 322 /* all back to 1 */ 323 tmp |= GPIO_SPI_ALL; 324 ice->gpio.set_data(ice, tmp); 325 udelay(100); 326 327 /* return all gpios to non-writable */ 328 ice->gpio.set_mask(ice, 0xffffff); 329 /* restore GPIOs direction */ 330 ice->gpio.set_dir(ice, orig_dir); 331 } 332 333 static void qtet_akm_set_regs(struct snd_akm4xxx *ak, unsigned char addr, 334 unsigned char mask, unsigned char value) 335 { 336 unsigned char tmp; 337 int chip; 338 for (chip = 0; chip < ak->num_chips; chip++) { 339 tmp = snd_akm4xxx_get(ak, chip, addr); 340 /* clear the bits */ 341 tmp &= ~mask; 342 /* set the new bits */ 343 tmp |= value; 344 snd_akm4xxx_write(ak, chip, addr, tmp); 345 } 346 } 347 348 /* 349 * change the rate of AK4620 350 */ 351 static void qtet_akm_set_rate_val(struct snd_akm4xxx *ak, unsigned int rate) 352 { 353 unsigned char ak4620_dfs; 354 355 if (rate == 0) /* no hint - S/PDIF input is master or the new spdif 356 input rate undetected, simply return */ 357 return; 358 359 /* adjust DFS on codecs - see datasheet */ 360 if (rate > 108000) 361 ak4620_dfs = AK4620_DFS1 | AK4620_CKS1; 362 else if (rate > 54000) 363 ak4620_dfs = AK4620_DFS0 | AK4620_CKS0; 364 else 365 ak4620_dfs = 0; 366 367 /* set new value */ 368 qtet_akm_set_regs(ak, AK4620_DFS_REG, AK4620_DFS0 | AK4620_DFS1 | 369 AK4620_CKS0 | AK4620_CKS1, ak4620_dfs); 370 } 371 372 #define AK_CONTROL(xname, xch) { .name = xname, .num_channels = xch } 373 374 #define PCM_12_PLAYBACK_VOLUME "PCM 1/2 Playback Volume" 375 #define PCM_34_PLAYBACK_VOLUME "PCM 3/4 Playback Volume" 376 #define PCM_12_CAPTURE_VOLUME "PCM 1/2 Capture Volume" 377 #define PCM_34_CAPTURE_VOLUME "PCM 3/4 Capture Volume" 378 379 static const struct snd_akm4xxx_dac_channel qtet_dac[] = { 380 AK_CONTROL(PCM_12_PLAYBACK_VOLUME, 2), 381 AK_CONTROL(PCM_34_PLAYBACK_VOLUME, 2), 382 }; 383 384 static const struct snd_akm4xxx_adc_channel qtet_adc[] = { 385 AK_CONTROL(PCM_12_CAPTURE_VOLUME, 2), 386 AK_CONTROL(PCM_34_CAPTURE_VOLUME, 2), 387 }; 388 389 static struct snd_akm4xxx akm_qtet_dac = { 390 .type = SND_AK4620, 391 .num_dacs = 4, /* DAC1 - Output 12 392 */ 393 .num_adcs = 4, /* ADC1 - Input 12 394 */ 395 .ops = { 396 .write = qtet_akm_write, 397 .set_rate_val = qtet_akm_set_rate_val, 398 }, 399 .dac_info = qtet_dac, 400 .adc_info = qtet_adc, 401 }; 402 403 /* Communication routines with the CPLD */ 404 405 406 /* Writes data to external register reg, both reg and data are 407 * GPIO representations */ 408 static void reg_write(struct snd_ice1712 *ice, unsigned int reg, 409 unsigned int data) 410 { 411 unsigned int tmp; 412 413 mutex_lock(&ice->gpio_mutex); 414 /* set direction of used GPIOs*/ 415 /* all outputs */ 416 tmp = 0x00ffff; 417 ice->gpio.set_dir(ice, tmp); 418 /* mask - writable bits */ 419 ice->gpio.set_mask(ice, ~(tmp)); 420 /* write the data */ 421 tmp = ice->gpio.get_data(ice); 422 tmp &= ~GPIO_DATA_MASK; 423 tmp |= data; 424 ice->gpio.set_data(ice, tmp); 425 udelay(100); 426 /* drop output enable */ 427 tmp &= ~GPIO_EX_GPIOE; 428 ice->gpio.set_data(ice, tmp); 429 udelay(100); 430 /* drop the register gpio */ 431 tmp &= ~reg; 432 ice->gpio.set_data(ice, tmp); 433 udelay(100); 434 /* raise the register GPIO */ 435 tmp |= reg; 436 ice->gpio.set_data(ice, tmp); 437 udelay(100); 438 439 /* raise all data gpios */ 440 tmp |= GPIO_DATA_MASK; 441 ice->gpio.set_data(ice, tmp); 442 /* mask - immutable bits */ 443 ice->gpio.set_mask(ice, 0xffffff); 444 /* outputs only 8-15 */ 445 ice->gpio.set_dir(ice, 0x00ff00); 446 mutex_unlock(&ice->gpio_mutex); 447 } 448 449 static unsigned int get_scr(struct snd_ice1712 *ice) 450 { 451 struct qtet_spec *spec = ice->spec; 452 return spec->scr; 453 } 454 455 static unsigned int get_mcr(struct snd_ice1712 *ice) 456 { 457 struct qtet_spec *spec = ice->spec; 458 return spec->mcr; 459 } 460 461 static unsigned int get_cpld(struct snd_ice1712 *ice) 462 { 463 struct qtet_spec *spec = ice->spec; 464 return spec->cpld; 465 } 466 467 static void set_scr(struct snd_ice1712 *ice, unsigned int val) 468 { 469 struct qtet_spec *spec = ice->spec; 470 reg_write(ice, GPIO_SCR, val); 471 spec->scr = val; 472 } 473 474 static void set_mcr(struct snd_ice1712 *ice, unsigned int val) 475 { 476 struct qtet_spec *spec = ice->spec; 477 reg_write(ice, GPIO_MCR, val); 478 spec->mcr = val; 479 } 480 481 static void set_cpld(struct snd_ice1712 *ice, unsigned int val) 482 { 483 struct qtet_spec *spec = ice->spec; 484 reg_write(ice, GPIO_CPLD_CSN, val); 485 spec->cpld = val; 486 } 487 488 static void proc_regs_read(struct snd_info_entry *entry, 489 struct snd_info_buffer *buffer) 490 { 491 struct snd_ice1712 *ice = entry->private_data; 492 char bin_buffer[36]; 493 494 snd_iprintf(buffer, "SCR: %s\n", get_binary(bin_buffer, 495 get_scr(ice))); 496 snd_iprintf(buffer, "MCR: %s\n", get_binary(bin_buffer, 497 get_mcr(ice))); 498 snd_iprintf(buffer, "CPLD: %s\n", get_binary(bin_buffer, 499 get_cpld(ice))); 500 } 501 502 static void proc_init(struct snd_ice1712 *ice) 503 { 504 struct snd_info_entry *entry; 505 if (!snd_card_proc_new(ice->card, "quartet", &entry)) 506 snd_info_set_text_ops(entry, ice, proc_regs_read); 507 } 508 509 static int qtet_mute_get(struct snd_kcontrol *kcontrol, 510 struct snd_ctl_elem_value *ucontrol) 511 { 512 struct snd_ice1712 *ice = snd_kcontrol_chip(kcontrol); 513 unsigned int val; 514 val = get_scr(ice) & SCR_MUTE; 515 ucontrol->value.integer.value[0] = (val) ? 0 : 1; 516 return 0; 517 } 518 519 static int qtet_mute_put(struct snd_kcontrol *kcontrol, 520 struct snd_ctl_elem_value *ucontrol) 521 { 522 struct snd_ice1712 *ice = snd_kcontrol_chip(kcontrol); 523 unsigned int old, new, smute; 524 old = get_scr(ice) & SCR_MUTE; 525 if (ucontrol->value.integer.value[0]) { 526 /* unmute */ 527 new = 0; 528 /* un-smuting DAC */ 529 smute = 0; 530 } else { 531 /* mute */ 532 new = SCR_MUTE; 533 /* smuting DAC */ 534 smute = AK4620_SMUTE; 535 } 536 if (old != new) { 537 struct snd_akm4xxx *ak = ice->akm; 538 set_scr(ice, (get_scr(ice) & ~SCR_MUTE) | new); 539 /* set smute */ 540 qtet_akm_set_regs(ak, AK4620_DEEMVOL_REG, AK4620_SMUTE, smute); 541 return 1; 542 } 543 /* no change */ 544 return 0; 545 } 546 547 static int qtet_ain12_enum_info(struct snd_kcontrol *kcontrol, 548 struct snd_ctl_elem_info *uinfo) 549 { 550 static const char * const texts[3] = 551 {"Line In 1/2", "Mic", "Mic + Low-cut"}; 552 return snd_ctl_enum_info(uinfo, 1, ARRAY_SIZE(texts), texts); 553 } 554 555 static int qtet_ain12_sw_get(struct snd_kcontrol *kcontrol, 556 struct snd_ctl_elem_value *ucontrol) 557 { 558 struct snd_ice1712 *ice = snd_kcontrol_chip(kcontrol); 559 unsigned int val, result; 560 val = get_scr(ice) & (SCR_AIN12_SEL1 | SCR_AIN12_SEL0); 561 switch (val) { 562 case SCR_AIN12_LINE: 563 result = 0; 564 break; 565 case SCR_AIN12_MIC: 566 result = 1; 567 break; 568 case SCR_AIN12_LOWCUT: 569 result = 2; 570 break; 571 default: 572 /* BUG - no other combinations allowed */ 573 snd_BUG(); 574 result = 0; 575 } 576 ucontrol->value.integer.value[0] = result; 577 return 0; 578 } 579 580 static int qtet_ain12_sw_put(struct snd_kcontrol *kcontrol, 581 struct snd_ctl_elem_value *ucontrol) 582 { 583 struct snd_ice1712 *ice = snd_kcontrol_chip(kcontrol); 584 unsigned int old, new, tmp, masked_old; 585 old = new = get_scr(ice); 586 masked_old = old & (SCR_AIN12_SEL1 | SCR_AIN12_SEL0); 587 tmp = ucontrol->value.integer.value[0]; 588 if (tmp == 2) 589 tmp = 3; /* binary 10 is not supported */ 590 tmp <<= 4; /* shifting to SCR_AIN12_SEL0 */ 591 if (tmp != masked_old) { 592 /* change requested */ 593 switch (tmp) { 594 case SCR_AIN12_LINE: 595 new = old & ~(SCR_AIN12_SEL1 | SCR_AIN12_SEL0); 596 set_scr(ice, new); 597 /* turn off relay */ 598 new &= ~SCR_RELAY; 599 set_scr(ice, new); 600 break; 601 case SCR_AIN12_MIC: 602 /* turn on relay */ 603 new = old | SCR_RELAY; 604 set_scr(ice, new); 605 new = (new & ~SCR_AIN12_SEL1) | SCR_AIN12_SEL0; 606 set_scr(ice, new); 607 break; 608 case SCR_AIN12_LOWCUT: 609 /* turn on relay */ 610 new = old | SCR_RELAY; 611 set_scr(ice, new); 612 new |= SCR_AIN12_SEL1 | SCR_AIN12_SEL0; 613 set_scr(ice, new); 614 break; 615 default: 616 snd_BUG(); 617 } 618 return 1; 619 } 620 /* no change */ 621 return 0; 622 } 623 624 static int qtet_php_get(struct snd_kcontrol *kcontrol, 625 struct snd_ctl_elem_value *ucontrol) 626 { 627 struct snd_ice1712 *ice = snd_kcontrol_chip(kcontrol); 628 unsigned int val; 629 /* if phantom voltage =48V, phantom on */ 630 val = get_scr(ice) & SCR_PHP_V; 631 ucontrol->value.integer.value[0] = val ? 1 : 0; 632 return 0; 633 } 634 635 static int qtet_php_put(struct snd_kcontrol *kcontrol, 636 struct snd_ctl_elem_value *ucontrol) 637 { 638 struct snd_ice1712 *ice = snd_kcontrol_chip(kcontrol); 639 unsigned int old, new; 640 old = new = get_scr(ice); 641 if (ucontrol->value.integer.value[0] /* phantom on requested */ 642 && (~old & SCR_PHP_V)) /* 0 = voltage 5V */ { 643 /* is off, turn on */ 644 /* turn voltage on first, = 1 */ 645 new = old | SCR_PHP_V; 646 set_scr(ice, new); 647 /* turn phantom on, = 0 */ 648 new &= ~SCR_PHP; 649 set_scr(ice, new); 650 } else if (!ucontrol->value.integer.value[0] && (old & SCR_PHP_V)) { 651 /* phantom off requested and 1 = voltage 48V */ 652 /* is on, turn off */ 653 /* turn voltage off first, = 0 */ 654 new = old & ~SCR_PHP_V; 655 set_scr(ice, new); 656 /* turn phantom off, = 1 */ 657 new |= SCR_PHP; 658 set_scr(ice, new); 659 } 660 if (old != new) 661 return 1; 662 /* no change */ 663 return 0; 664 } 665 666 #define PRIV_SW(xid, xbit, xreg) [xid] = {.bit = xbit,\ 667 .set_register = set_##xreg,\ 668 .get_register = get_##xreg, } 669 670 671 #define PRIV_ENUM2(xid, xbit, xreg, xtext1, xtext2) [xid] = {.bit = xbit,\ 672 .set_register = set_##xreg,\ 673 .get_register = get_##xreg,\ 674 .texts = {xtext1, xtext2} } 675 676 static struct qtet_kcontrol_private qtet_privates[] = { 677 PRIV_ENUM2(IN12_SEL, CPLD_IN12_SEL, cpld, "An In 1/2", "An In 3/4"), 678 PRIV_ENUM2(IN34_SEL, CPLD_IN34_SEL, cpld, "An In 3/4", "IEC958 In"), 679 PRIV_ENUM2(AIN34_SEL, SCR_AIN34_SEL, scr, "Line In 3/4", "Hi-Z"), 680 PRIV_ENUM2(COAX_OUT, CPLD_COAX_OUT, cpld, "IEC958", "I2S"), 681 PRIV_SW(IN12_MON12, MCR_IN12_MON12, mcr), 682 PRIV_SW(IN12_MON34, MCR_IN12_MON34, mcr), 683 PRIV_SW(IN34_MON12, MCR_IN34_MON12, mcr), 684 PRIV_SW(IN34_MON34, MCR_IN34_MON34, mcr), 685 PRIV_SW(OUT12_MON34, MCR_OUT12_MON34, mcr), 686 PRIV_SW(OUT34_MON12, MCR_OUT34_MON12, mcr), 687 }; 688 689 static int qtet_enum_info(struct snd_kcontrol *kcontrol, 690 struct snd_ctl_elem_info *uinfo) 691 { 692 struct qtet_kcontrol_private private = 693 qtet_privates[kcontrol->private_value]; 694 return snd_ctl_enum_info(uinfo, 1, ARRAY_SIZE(private.texts), 695 private.texts); 696 } 697 698 static int qtet_sw_get(struct snd_kcontrol *kcontrol, 699 struct snd_ctl_elem_value *ucontrol) 700 { 701 struct qtet_kcontrol_private private = 702 qtet_privates[kcontrol->private_value]; 703 struct snd_ice1712 *ice = snd_kcontrol_chip(kcontrol); 704 ucontrol->value.integer.value[0] = 705 (private.get_register(ice) & private.bit) ? 1 : 0; 706 return 0; 707 } 708 709 static int qtet_sw_put(struct snd_kcontrol *kcontrol, 710 struct snd_ctl_elem_value *ucontrol) 711 { 712 struct qtet_kcontrol_private private = 713 qtet_privates[kcontrol->private_value]; 714 struct snd_ice1712 *ice = snd_kcontrol_chip(kcontrol); 715 unsigned int old, new; 716 old = private.get_register(ice); 717 if (ucontrol->value.integer.value[0]) 718 new = old | private.bit; 719 else 720 new = old & ~private.bit; 721 if (old != new) { 722 private.set_register(ice, new); 723 return 1; 724 } 725 /* no change */ 726 return 0; 727 } 728 729 #define qtet_sw_info snd_ctl_boolean_mono_info 730 731 #define QTET_CONTROL(xname, xtype, xpriv) \ 732 {.iface = SNDRV_CTL_ELEM_IFACE_MIXER,\ 733 .name = xname,\ 734 .info = qtet_##xtype##_info,\ 735 .get = qtet_sw_get,\ 736 .put = qtet_sw_put,\ 737 .private_value = xpriv } 738 739 static struct snd_kcontrol_new qtet_controls[] = { 740 { 741 .iface = SNDRV_CTL_ELEM_IFACE_MIXER, 742 .name = "Master Playback Switch", 743 .info = qtet_sw_info, 744 .get = qtet_mute_get, 745 .put = qtet_mute_put, 746 .private_value = 0 747 }, 748 { 749 .iface = SNDRV_CTL_ELEM_IFACE_MIXER, 750 .name = "Phantom Power", 751 .info = qtet_sw_info, 752 .get = qtet_php_get, 753 .put = qtet_php_put, 754 .private_value = 0 755 }, 756 { 757 .iface = SNDRV_CTL_ELEM_IFACE_MIXER, 758 .name = "Analog In 1/2 Capture Switch", 759 .info = qtet_ain12_enum_info, 760 .get = qtet_ain12_sw_get, 761 .put = qtet_ain12_sw_put, 762 .private_value = 0 763 }, 764 QTET_CONTROL("Analog In 3/4 Capture Switch", enum, AIN34_SEL), 765 QTET_CONTROL("PCM In 1/2 Capture Switch", enum, IN12_SEL), 766 QTET_CONTROL("PCM In 3/4 Capture Switch", enum, IN34_SEL), 767 QTET_CONTROL("Coax Output Source", enum, COAX_OUT), 768 QTET_CONTROL("Analog In 1/2 to Monitor 1/2", sw, IN12_MON12), 769 QTET_CONTROL("Analog In 1/2 to Monitor 3/4", sw, IN12_MON34), 770 QTET_CONTROL("Analog In 3/4 to Monitor 1/2", sw, IN34_MON12), 771 QTET_CONTROL("Analog In 3/4 to Monitor 3/4", sw, IN34_MON34), 772 QTET_CONTROL("Output 1/2 to Monitor 3/4", sw, OUT12_MON34), 773 QTET_CONTROL("Output 3/4 to Monitor 1/2", sw, OUT34_MON12), 774 }; 775 776 static char *slave_vols[] = { 777 PCM_12_PLAYBACK_VOLUME, 778 PCM_34_PLAYBACK_VOLUME, 779 NULL 780 }; 781 782 static 783 DECLARE_TLV_DB_SCALE(qtet_master_db_scale, -6350, 50, 1); 784 785 static struct snd_kcontrol *ctl_find(struct snd_card *card, 786 const char *name) 787 { 788 struct snd_ctl_elem_id sid; 789 memset(&sid, 0, sizeof(sid)); 790 /* FIXME: strcpy is bad. */ 791 strcpy(sid.name, name); 792 sid.iface = SNDRV_CTL_ELEM_IFACE_MIXER; 793 return snd_ctl_find_id(card, &sid); 794 } 795 796 static void add_slaves(struct snd_card *card, 797 struct snd_kcontrol *master, char * const *list) 798 { 799 for (; *list; list++) { 800 struct snd_kcontrol *slave = ctl_find(card, *list); 801 if (slave) 802 snd_ctl_add_slave(master, slave); 803 } 804 } 805 806 static int qtet_add_controls(struct snd_ice1712 *ice) 807 { 808 struct qtet_spec *spec = ice->spec; 809 int err, i; 810 struct snd_kcontrol *vmaster; 811 err = snd_ice1712_akm4xxx_build_controls(ice); 812 if (err < 0) 813 return err; 814 for (i = 0; i < ARRAY_SIZE(qtet_controls); i++) { 815 err = snd_ctl_add(ice->card, 816 snd_ctl_new1(&qtet_controls[i], ice)); 817 if (err < 0) 818 return err; 819 } 820 821 /* Create virtual master control */ 822 vmaster = snd_ctl_make_virtual_master("Master Playback Volume", 823 qtet_master_db_scale); 824 if (!vmaster) 825 return -ENOMEM; 826 add_slaves(ice->card, vmaster, slave_vols); 827 err = snd_ctl_add(ice->card, vmaster); 828 if (err < 0) 829 return err; 830 /* only capture SPDIF over AK4113 */ 831 return snd_ak4113_build(spec->ak4113, 832 ice->pcm->streams[SNDRV_PCM_STREAM_CAPTURE].substream); 833 } 834 835 static inline int qtet_is_spdif_master(struct snd_ice1712 *ice) 836 { 837 /* CPLD_SYNC_SEL: 0 = internal, 1 = external (i.e. spdif master) */ 838 return (get_cpld(ice) & CPLD_SYNC_SEL) ? 1 : 0; 839 } 840 841 static unsigned int qtet_get_rate(struct snd_ice1712 *ice) 842 { 843 int i; 844 unsigned char result; 845 846 result = get_cpld(ice) & CPLD_CKS_MASK; 847 for (i = 0; i < ARRAY_SIZE(cks_vals); i++) 848 if (cks_vals[i] == result) 849 return qtet_rates[i]; 850 return 0; 851 } 852 853 static int get_cks_val(int rate) 854 { 855 int i; 856 for (i = 0; i < ARRAY_SIZE(qtet_rates); i++) 857 if (qtet_rates[i] == rate) 858 return cks_vals[i]; 859 return 0; 860 } 861 862 /* setting new rate */ 863 static void qtet_set_rate(struct snd_ice1712 *ice, unsigned int rate) 864 { 865 unsigned int new; 866 unsigned char val; 867 /* switching ice1724 to external clock - supplied by ext. circuits */ 868 val = inb(ICEMT1724(ice, RATE)); 869 outb(val | VT1724_SPDIF_MASTER, ICEMT1724(ice, RATE)); 870 871 new = (get_cpld(ice) & ~CPLD_CKS_MASK) | get_cks_val(rate); 872 /* switch to internal clock, drop CPLD_SYNC_SEL */ 873 new &= ~CPLD_SYNC_SEL; 874 /* dev_dbg(ice->card->dev, "QT - set_rate: old %x, new %x\n", 875 get_cpld(ice), new); */ 876 set_cpld(ice, new); 877 } 878 879 static inline unsigned char qtet_set_mclk(struct snd_ice1712 *ice, 880 unsigned int rate) 881 { 882 /* no change in master clock */ 883 return 0; 884 } 885 886 /* setting clock to external - SPDIF */ 887 static int qtet_set_spdif_clock(struct snd_ice1712 *ice, int type) 888 { 889 unsigned int old, new; 890 891 old = new = get_cpld(ice); 892 new &= ~(CPLD_CKS_MASK | CPLD_WORD_SEL); 893 switch (type) { 894 case EXT_SPDIF_TYPE: 895 new |= CPLD_EXT_SPDIF; 896 break; 897 case EXT_WORDCLOCK_1FS_TYPE: 898 new |= CPLD_EXT_WORDCLOCK_1FS; 899 break; 900 case EXT_WORDCLOCK_256FS_TYPE: 901 new |= CPLD_EXT_WORDCLOCK_256FS; 902 break; 903 default: 904 snd_BUG(); 905 } 906 if (old != new) { 907 set_cpld(ice, new); 908 /* changed */ 909 return 1; 910 } 911 return 0; 912 } 913 914 static int qtet_get_spdif_master_type(struct snd_ice1712 *ice) 915 { 916 unsigned int val; 917 int result; 918 val = get_cpld(ice); 919 /* checking only rate/clock-related bits */ 920 val &= (CPLD_CKS_MASK | CPLD_WORD_SEL | CPLD_SYNC_SEL); 921 if (!(val & CPLD_SYNC_SEL)) { 922 /* switched to internal clock, is not any external type */ 923 result = -1; 924 } else { 925 switch (val) { 926 case (CPLD_EXT_SPDIF): 927 result = EXT_SPDIF_TYPE; 928 break; 929 case (CPLD_EXT_WORDCLOCK_1FS): 930 result = EXT_WORDCLOCK_1FS_TYPE; 931 break; 932 case (CPLD_EXT_WORDCLOCK_256FS): 933 result = EXT_WORDCLOCK_256FS_TYPE; 934 break; 935 default: 936 /* undefined combination of external clock setup */ 937 snd_BUG(); 938 result = 0; 939 } 940 } 941 return result; 942 } 943 944 /* Called when ak4113 detects change in the input SPDIF stream */ 945 static void qtet_ak4113_change(struct ak4113 *ak4113, unsigned char c0, 946 unsigned char c1) 947 { 948 struct snd_ice1712 *ice = ak4113->change_callback_private; 949 int rate; 950 if ((qtet_get_spdif_master_type(ice) == EXT_SPDIF_TYPE) && 951 c1) { 952 /* only for SPDIF master mode, rate was changed */ 953 rate = snd_ak4113_external_rate(ak4113); 954 /* dev_dbg(ice->card->dev, "ak4113 - input rate changed to %d\n", 955 rate); */ 956 qtet_akm_set_rate_val(ice->akm, rate); 957 } 958 } 959 960 /* 961 * If clock slaved to SPDIF-IN, setting runtime rate 962 * to the detected external rate 963 */ 964 static void qtet_spdif_in_open(struct snd_ice1712 *ice, 965 struct snd_pcm_substream *substream) 966 { 967 struct qtet_spec *spec = ice->spec; 968 struct snd_pcm_runtime *runtime = substream->runtime; 969 int rate; 970 971 if (qtet_get_spdif_master_type(ice) != EXT_SPDIF_TYPE) 972 /* not external SPDIF, no rate limitation */ 973 return; 974 /* only external SPDIF can detect incoming sample rate */ 975 rate = snd_ak4113_external_rate(spec->ak4113); 976 if (rate >= runtime->hw.rate_min && rate <= runtime->hw.rate_max) { 977 runtime->hw.rate_min = rate; 978 runtime->hw.rate_max = rate; 979 } 980 } 981 982 /* 983 * initialize the chip 984 */ 985 static int qtet_init(struct snd_ice1712 *ice) 986 { 987 static const unsigned char ak4113_init_vals[] = { 988 /* AK4113_REG_PWRDN */ AK4113_RST | AK4113_PWN | 989 AK4113_OCKS0 | AK4113_OCKS1, 990 /* AK4113_REQ_FORMAT */ AK4113_DIF_I24I2S | AK4113_VTX | 991 AK4113_DEM_OFF | AK4113_DEAU, 992 /* AK4113_REG_IO0 */ AK4113_OPS2 | AK4113_TXE | 993 AK4113_XTL_24_576M, 994 /* AK4113_REG_IO1 */ AK4113_EFH_1024LRCLK | AK4113_IPS(0), 995 /* AK4113_REG_INT0_MASK */ 0, 996 /* AK4113_REG_INT1_MASK */ 0, 997 /* AK4113_REG_DATDTS */ 0, 998 }; 999 int err; 1000 struct qtet_spec *spec; 1001 struct snd_akm4xxx *ak; 1002 unsigned char val; 1003 1004 /* switching ice1724 to external clock - supplied by ext. circuits */ 1005 val = inb(ICEMT1724(ice, RATE)); 1006 outb(val | VT1724_SPDIF_MASTER, ICEMT1724(ice, RATE)); 1007 1008 spec = kzalloc(sizeof(*spec), GFP_KERNEL); 1009 if (!spec) 1010 return -ENOMEM; 1011 /* qtet is clocked by Xilinx array */ 1012 ice->hw_rates = &qtet_rates_info; 1013 ice->is_spdif_master = qtet_is_spdif_master; 1014 ice->get_rate = qtet_get_rate; 1015 ice->set_rate = qtet_set_rate; 1016 ice->set_mclk = qtet_set_mclk; 1017 ice->set_spdif_clock = qtet_set_spdif_clock; 1018 ice->get_spdif_master_type = qtet_get_spdif_master_type; 1019 ice->ext_clock_names = ext_clock_names; 1020 ice->ext_clock_count = ARRAY_SIZE(ext_clock_names); 1021 /* since Qtet can detect correct SPDIF-in rate, all streams can be 1022 * limited to this specific rate */ 1023 ice->spdif.ops.open = ice->pro_open = qtet_spdif_in_open; 1024 ice->spec = spec; 1025 1026 /* Mute Off */ 1027 /* SCR Initialize*/ 1028 /* keep codec power down first */ 1029 set_scr(ice, SCR_PHP); 1030 udelay(1); 1031 /* codec power up */ 1032 set_scr(ice, SCR_PHP | SCR_CODEC_PDN); 1033 1034 /* MCR Initialize */ 1035 set_mcr(ice, 0); 1036 1037 /* CPLD Initialize */ 1038 set_cpld(ice, 0); 1039 1040 1041 ice->num_total_dacs = 2; 1042 ice->num_total_adcs = 2; 1043 1044 ice->akm = kcalloc(2, sizeof(struct snd_akm4xxx), GFP_KERNEL); 1045 ak = ice->akm; 1046 if (!ak) 1047 return -ENOMEM; 1048 /* only one codec with two chips */ 1049 ice->akm_codecs = 1; 1050 err = snd_ice1712_akm4xxx_init(ak, &akm_qtet_dac, NULL, ice); 1051 if (err < 0) 1052 return err; 1053 err = snd_ak4113_create(ice->card, 1054 qtet_ak4113_read, 1055 qtet_ak4113_write, 1056 ak4113_init_vals, 1057 ice, &spec->ak4113); 1058 if (err < 0) 1059 return err; 1060 /* callback for codecs rate setting */ 1061 spec->ak4113->change_callback = qtet_ak4113_change; 1062 spec->ak4113->change_callback_private = ice; 1063 /* AK41143 in Quartet can detect external rate correctly 1064 * (i.e. check_flags = 0) */ 1065 spec->ak4113->check_flags = 0; 1066 1067 proc_init(ice); 1068 1069 qtet_set_rate(ice, 44100); 1070 return 0; 1071 } 1072 1073 static unsigned char qtet_eeprom[] = { 1074 [ICE_EEP2_SYSCONF] = 0x28, /* clock 256(24MHz), mpu401, 1xADC, 1075 1xDACs, SPDIF in */ 1076 [ICE_EEP2_ACLINK] = 0x80, /* I2S */ 1077 [ICE_EEP2_I2S] = 0x78, /* 96k, 24bit, 192k */ 1078 [ICE_EEP2_SPDIF] = 0xc3, /* out-en, out-int, in, out-ext */ 1079 [ICE_EEP2_GPIO_DIR] = 0x00, /* 0-7 inputs, switched to output 1080 only during output operations */ 1081 [ICE_EEP2_GPIO_DIR1] = 0xff, /* 8-15 outputs */ 1082 [ICE_EEP2_GPIO_DIR2] = 0x00, 1083 [ICE_EEP2_GPIO_MASK] = 0xff, /* changed only for OUT operations */ 1084 [ICE_EEP2_GPIO_MASK1] = 0x00, 1085 [ICE_EEP2_GPIO_MASK2] = 0xff, 1086 1087 [ICE_EEP2_GPIO_STATE] = 0x00, /* inputs */ 1088 [ICE_EEP2_GPIO_STATE1] = 0x7d, /* all 1, but GPIO_CPLD_RW 1089 and GPIO15 always zero */ 1090 [ICE_EEP2_GPIO_STATE2] = 0x00, /* inputs */ 1091 }; 1092 1093 /* entry point */ 1094 struct snd_ice1712_card_info snd_vt1724_qtet_cards[] = { 1095 { 1096 .subvendor = VT1724_SUBDEVICE_QTET, 1097 .name = "Infrasonic Quartet", 1098 .model = "quartet", 1099 .chip_init = qtet_init, 1100 .build_controls = qtet_add_controls, 1101 .eeprom_size = sizeof(qtet_eeprom), 1102 .eeprom_data = qtet_eeprom, 1103 }, 1104 { } /* terminator */ 1105 }; 1106