1 /* 2 * ALSA driver for ICEnsemble VT1724 (Envy24HT) 3 * 4 * Lowlevel functions for ESI Maya44 cards 5 * 6 * Copyright (c) 2009 Takashi Iwai <tiwai@suse.de> 7 * Based on the patches by Rainer Zimmermann <mail@lightshed.de> 8 * 9 * This program is free software; you can redistribute it and/or modify 10 * it under the terms of the GNU General Public License as published by 11 * the Free Software Foundation; either version 2 of the License, or 12 * (at your option) any later version. 13 * 14 * This program is distributed in the hope that it will be useful, 15 * but WITHOUT ANY WARRANTY; without even the implied warranty of 16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 17 * GNU General Public License for more details. 18 * 19 * You should have received a copy of the GNU General Public License 20 * along with this program; if not, write to the Free Software 21 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA 22 * 23 */ 24 25 #include <linux/init.h> 26 #include <linux/slab.h> 27 #include <sound/core.h> 28 #include <sound/control.h> 29 #include <sound/pcm.h> 30 #include <sound/tlv.h> 31 32 #include "ice1712.h" 33 #include "envy24ht.h" 34 #include "maya44.h" 35 36 /* WM8776 register indexes */ 37 #define WM8776_REG_HEADPHONE_L 0x00 38 #define WM8776_REG_HEADPHONE_R 0x01 39 #define WM8776_REG_HEADPHONE_MASTER 0x02 40 #define WM8776_REG_DAC_ATTEN_L 0x03 41 #define WM8776_REG_DAC_ATTEN_R 0x04 42 #define WM8776_REG_DAC_ATTEN_MASTER 0x05 43 #define WM8776_REG_DAC_PHASE 0x06 44 #define WM8776_REG_DAC_CONTROL 0x07 45 #define WM8776_REG_DAC_MUTE 0x08 46 #define WM8776_REG_DAC_DEEMPH 0x09 47 #define WM8776_REG_DAC_IF_CONTROL 0x0a 48 #define WM8776_REG_ADC_IF_CONTROL 0x0b 49 #define WM8776_REG_MASTER_MODE_CONTROL 0x0c 50 #define WM8776_REG_POWERDOWN 0x0d 51 #define WM8776_REG_ADC_ATTEN_L 0x0e 52 #define WM8776_REG_ADC_ATTEN_R 0x0f 53 #define WM8776_REG_ADC_ALC1 0x10 54 #define WM8776_REG_ADC_ALC2 0x11 55 #define WM8776_REG_ADC_ALC3 0x12 56 #define WM8776_REG_ADC_NOISE_GATE 0x13 57 #define WM8776_REG_ADC_LIMITER 0x14 58 #define WM8776_REG_ADC_MUX 0x15 59 #define WM8776_REG_OUTPUT_MUX 0x16 60 #define WM8776_REG_RESET 0x17 61 62 #define WM8776_NUM_REGS 0x18 63 64 /* clock ratio identifiers for snd_wm8776_set_rate() */ 65 #define WM8776_CLOCK_RATIO_128FS 0 66 #define WM8776_CLOCK_RATIO_192FS 1 67 #define WM8776_CLOCK_RATIO_256FS 2 68 #define WM8776_CLOCK_RATIO_384FS 3 69 #define WM8776_CLOCK_RATIO_512FS 4 70 #define WM8776_CLOCK_RATIO_768FS 5 71 72 enum { WM_VOL_HP, WM_VOL_DAC, WM_VOL_ADC, WM_NUM_VOLS }; 73 enum { WM_SW_DAC, WM_SW_BYPASS, WM_NUM_SWITCHES }; 74 75 struct snd_wm8776 { 76 unsigned char addr; 77 unsigned short regs[WM8776_NUM_REGS]; 78 unsigned char volumes[WM_NUM_VOLS][2]; 79 unsigned int switch_bits; 80 }; 81 82 struct snd_maya44 { 83 struct snd_ice1712 *ice; 84 struct snd_wm8776 wm[2]; 85 struct mutex mutex; 86 }; 87 88 89 /* write the given register and save the data to the cache */ 90 static void wm8776_write(struct snd_ice1712 *ice, struct snd_wm8776 *wm, 91 unsigned char reg, unsigned short val) 92 { 93 /* 94 * WM8776 registers are up to 9 bits wide, bit 8 is placed in the LSB 95 * of the address field 96 */ 97 snd_vt1724_write_i2c(ice, wm->addr, 98 (reg << 1) | ((val >> 8) & 1), 99 val & 0xff); 100 wm->regs[reg] = val; 101 } 102 103 /* 104 * update the given register with and/or mask and save the data to the cache 105 */ 106 static int wm8776_write_bits(struct snd_ice1712 *ice, struct snd_wm8776 *wm, 107 unsigned char reg, 108 unsigned short mask, unsigned short val) 109 { 110 val |= wm->regs[reg] & ~mask; 111 if (val != wm->regs[reg]) { 112 wm8776_write(ice, wm, reg, val); 113 return 1; 114 } 115 return 0; 116 } 117 118 119 /* 120 * WM8776 volume controls 121 */ 122 123 struct maya_vol_info { 124 unsigned int maxval; /* volume range: 0..maxval */ 125 unsigned char regs[2]; /* left and right registers */ 126 unsigned short mask; /* value mask */ 127 unsigned short offset; /* zero-value offset */ 128 unsigned short mute; /* mute bit */ 129 unsigned short update; /* update bits */ 130 unsigned char mux_bits[2]; /* extra bits for ADC mute */ 131 }; 132 133 static struct maya_vol_info vol_info[WM_NUM_VOLS] = { 134 [WM_VOL_HP] = { 135 .maxval = 80, 136 .regs = { WM8776_REG_HEADPHONE_L, WM8776_REG_HEADPHONE_R }, 137 .mask = 0x7f, 138 .offset = 0x30, 139 .mute = 0x00, 140 .update = 0x180, /* update and zero-cross enable */ 141 }, 142 [WM_VOL_DAC] = { 143 .maxval = 255, 144 .regs = { WM8776_REG_DAC_ATTEN_L, WM8776_REG_DAC_ATTEN_R }, 145 .mask = 0xff, 146 .offset = 0x01, 147 .mute = 0x00, 148 .update = 0x100, /* zero-cross enable */ 149 }, 150 [WM_VOL_ADC] = { 151 .maxval = 91, 152 .regs = { WM8776_REG_ADC_ATTEN_L, WM8776_REG_ADC_ATTEN_R }, 153 .mask = 0xff, 154 .offset = 0xa5, 155 .mute = 0xa5, 156 .update = 0x100, /* update */ 157 .mux_bits = { 0x80, 0x40 }, /* ADCMUX bits */ 158 }, 159 }; 160 161 /* 162 * dB tables 163 */ 164 /* headphone output: mute, -73..+6db (1db step) */ 165 static const DECLARE_TLV_DB_SCALE(db_scale_hp, -7400, 100, 1); 166 /* DAC output: mute, -127..0db (0.5db step) */ 167 static const DECLARE_TLV_DB_SCALE(db_scale_dac, -12750, 50, 1); 168 /* ADC gain: mute, -21..+24db (0.5db step) */ 169 static const DECLARE_TLV_DB_SCALE(db_scale_adc, -2100, 50, 1); 170 171 static int maya_vol_info(struct snd_kcontrol *kcontrol, 172 struct snd_ctl_elem_info *uinfo) 173 { 174 unsigned int idx = kcontrol->private_value; 175 struct maya_vol_info *vol = &vol_info[idx]; 176 177 uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; 178 uinfo->count = 2; 179 uinfo->value.integer.min = 0; 180 uinfo->value.integer.max = vol->maxval; 181 return 0; 182 } 183 184 static int maya_vol_get(struct snd_kcontrol *kcontrol, 185 struct snd_ctl_elem_value *ucontrol) 186 { 187 struct snd_maya44 *chip = snd_kcontrol_chip(kcontrol); 188 struct snd_wm8776 *wm = 189 &chip->wm[snd_ctl_get_ioff(kcontrol, &ucontrol->id)]; 190 unsigned int idx = kcontrol->private_value; 191 192 mutex_lock(&chip->mutex); 193 ucontrol->value.integer.value[0] = wm->volumes[idx][0]; 194 ucontrol->value.integer.value[1] = wm->volumes[idx][1]; 195 mutex_unlock(&chip->mutex); 196 return 0; 197 } 198 199 static int maya_vol_put(struct snd_kcontrol *kcontrol, 200 struct snd_ctl_elem_value *ucontrol) 201 { 202 struct snd_maya44 *chip = snd_kcontrol_chip(kcontrol); 203 struct snd_wm8776 *wm = 204 &chip->wm[snd_ctl_get_ioff(kcontrol, &ucontrol->id)]; 205 unsigned int idx = kcontrol->private_value; 206 struct maya_vol_info *vol = &vol_info[idx]; 207 unsigned int val, data; 208 int ch, changed = 0; 209 210 mutex_lock(&chip->mutex); 211 for (ch = 0; ch < 2; ch++) { 212 val = ucontrol->value.integer.value[ch]; 213 if (val > vol->maxval) 214 val = vol->maxval; 215 if (val == wm->volumes[idx][ch]) 216 continue; 217 if (!val) 218 data = vol->mute; 219 else 220 data = (val - 1) + vol->offset; 221 data |= vol->update; 222 changed |= wm8776_write_bits(chip->ice, wm, vol->regs[ch], 223 vol->mask | vol->update, data); 224 if (vol->mux_bits[ch]) 225 wm8776_write_bits(chip->ice, wm, WM8776_REG_ADC_MUX, 226 vol->mux_bits[ch], 227 val ? 0 : vol->mux_bits[ch]); 228 wm->volumes[idx][ch] = val; 229 } 230 mutex_unlock(&chip->mutex); 231 return changed; 232 } 233 234 /* 235 * WM8776 switch controls 236 */ 237 238 #define COMPOSE_SW_VAL(idx, reg, mask) ((idx) | ((reg) << 8) | ((mask) << 16)) 239 #define GET_SW_VAL_IDX(val) ((val) & 0xff) 240 #define GET_SW_VAL_REG(val) (((val) >> 8) & 0xff) 241 #define GET_SW_VAL_MASK(val) (((val) >> 16) & 0xff) 242 243 #define maya_sw_info snd_ctl_boolean_mono_info 244 245 static int maya_sw_get(struct snd_kcontrol *kcontrol, 246 struct snd_ctl_elem_value *ucontrol) 247 { 248 struct snd_maya44 *chip = snd_kcontrol_chip(kcontrol); 249 struct snd_wm8776 *wm = 250 &chip->wm[snd_ctl_get_ioff(kcontrol, &ucontrol->id)]; 251 unsigned int idx = GET_SW_VAL_IDX(kcontrol->private_value); 252 253 ucontrol->value.integer.value[0] = (wm->switch_bits >> idx) & 1; 254 return 0; 255 } 256 257 static int maya_sw_put(struct snd_kcontrol *kcontrol, 258 struct snd_ctl_elem_value *ucontrol) 259 { 260 struct snd_maya44 *chip = snd_kcontrol_chip(kcontrol); 261 struct snd_wm8776 *wm = 262 &chip->wm[snd_ctl_get_ioff(kcontrol, &ucontrol->id)]; 263 unsigned int idx = GET_SW_VAL_IDX(kcontrol->private_value); 264 unsigned int mask, val; 265 int changed; 266 267 mutex_lock(&chip->mutex); 268 mask = 1 << idx; 269 wm->switch_bits &= ~mask; 270 val = ucontrol->value.integer.value[0]; 271 if (val) 272 wm->switch_bits |= mask; 273 mask = GET_SW_VAL_MASK(kcontrol->private_value); 274 changed = wm8776_write_bits(chip->ice, wm, 275 GET_SW_VAL_REG(kcontrol->private_value), 276 mask, val ? mask : 0); 277 mutex_unlock(&chip->mutex); 278 return changed; 279 } 280 281 /* 282 * GPIO pins (known ones for maya44) 283 */ 284 #define GPIO_PHANTOM_OFF 2 285 #define GPIO_MIC_RELAY 4 286 #define GPIO_SPDIF_IN_INV 5 287 #define GPIO_MUST_BE_0 7 288 289 /* 290 * GPIO switch controls 291 */ 292 293 #define COMPOSE_GPIO_VAL(shift, inv) ((shift) | ((inv) << 8)) 294 #define GET_GPIO_VAL_SHIFT(val) ((val) & 0xff) 295 #define GET_GPIO_VAL_INV(val) (((val) >> 8) & 1) 296 297 static int maya_set_gpio_bits(struct snd_ice1712 *ice, unsigned int mask, 298 unsigned int bits) 299 { 300 unsigned int data; 301 data = snd_ice1712_gpio_read(ice); 302 if ((data & mask) == bits) 303 return 0; 304 snd_ice1712_gpio_write(ice, (data & ~mask) | bits); 305 return 1; 306 } 307 308 #define maya_gpio_sw_info snd_ctl_boolean_mono_info 309 310 static int maya_gpio_sw_get(struct snd_kcontrol *kcontrol, 311 struct snd_ctl_elem_value *ucontrol) 312 { 313 struct snd_maya44 *chip = snd_kcontrol_chip(kcontrol); 314 unsigned int shift = GET_GPIO_VAL_SHIFT(kcontrol->private_value); 315 unsigned int val; 316 317 val = (snd_ice1712_gpio_read(chip->ice) >> shift) & 1; 318 if (GET_GPIO_VAL_INV(kcontrol->private_value)) 319 val = !val; 320 ucontrol->value.integer.value[0] = val; 321 return 0; 322 } 323 324 static int maya_gpio_sw_put(struct snd_kcontrol *kcontrol, 325 struct snd_ctl_elem_value *ucontrol) 326 { 327 struct snd_maya44 *chip = snd_kcontrol_chip(kcontrol); 328 unsigned int shift = GET_GPIO_VAL_SHIFT(kcontrol->private_value); 329 unsigned int val, mask; 330 int changed; 331 332 mutex_lock(&chip->mutex); 333 mask = 1 << shift; 334 val = ucontrol->value.integer.value[0]; 335 if (GET_GPIO_VAL_INV(kcontrol->private_value)) 336 val = !val; 337 val = val ? mask : 0; 338 changed = maya_set_gpio_bits(chip->ice, mask, val); 339 mutex_unlock(&chip->mutex); 340 return changed; 341 } 342 343 /* 344 * capture source selection 345 */ 346 347 /* known working input slots (0-4) */ 348 #define MAYA_LINE_IN 1 /* in-2 */ 349 #define MAYA_MIC_IN 3 /* in-4 */ 350 351 static void wm8776_select_input(struct snd_maya44 *chip, int idx, int line) 352 { 353 wm8776_write_bits(chip->ice, &chip->wm[idx], WM8776_REG_ADC_MUX, 354 0x1f, 1 << line); 355 } 356 357 static int maya_rec_src_info(struct snd_kcontrol *kcontrol, 358 struct snd_ctl_elem_info *uinfo) 359 { 360 static const char * const texts[] = { "Line", "Mic" }; 361 362 uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED; 363 uinfo->count = 1; 364 uinfo->value.enumerated.items = ARRAY_SIZE(texts); 365 if (uinfo->value.enumerated.item >= uinfo->value.enumerated.items) 366 uinfo->value.enumerated.item = 367 uinfo->value.enumerated.items - 1; 368 strcpy(uinfo->value.enumerated.name, 369 texts[uinfo->value.enumerated.item]); 370 return 0; 371 } 372 373 static int maya_rec_src_get(struct snd_kcontrol *kcontrol, 374 struct snd_ctl_elem_value *ucontrol) 375 { 376 struct snd_maya44 *chip = snd_kcontrol_chip(kcontrol); 377 int sel; 378 379 if (snd_ice1712_gpio_read(chip->ice) & (1 << GPIO_MIC_RELAY)) 380 sel = 1; 381 else 382 sel = 0; 383 ucontrol->value.enumerated.item[0] = sel; 384 return 0; 385 } 386 387 static int maya_rec_src_put(struct snd_kcontrol *kcontrol, 388 struct snd_ctl_elem_value *ucontrol) 389 { 390 struct snd_maya44 *chip = snd_kcontrol_chip(kcontrol); 391 int sel = ucontrol->value.enumerated.item[0]; 392 int changed; 393 394 mutex_lock(&chip->mutex); 395 changed = maya_set_gpio_bits(chip->ice, 1 << GPIO_MIC_RELAY, 396 sel ? (1 << GPIO_MIC_RELAY) : 0); 397 wm8776_select_input(chip, 0, sel ? MAYA_MIC_IN : MAYA_LINE_IN); 398 mutex_unlock(&chip->mutex); 399 return changed; 400 } 401 402 /* 403 * Maya44 routing switch settings have different meanings than the standard 404 * ice1724 switches as defined in snd_vt1724_pro_route_info (ice1724.c). 405 */ 406 static int maya_pb_route_info(struct snd_kcontrol *kcontrol, 407 struct snd_ctl_elem_info *uinfo) 408 { 409 static const char * const texts[] = { 410 "PCM Out", /* 0 */ 411 "Input 1", "Input 2", "Input 3", "Input 4" 412 }; 413 414 uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED; 415 uinfo->count = 1; 416 uinfo->value.enumerated.items = ARRAY_SIZE(texts); 417 if (uinfo->value.enumerated.item >= uinfo->value.enumerated.items) 418 uinfo->value.enumerated.item = 419 uinfo->value.enumerated.items - 1; 420 strcpy(uinfo->value.enumerated.name, 421 texts[uinfo->value.enumerated.item]); 422 return 0; 423 } 424 425 static int maya_pb_route_shift(int idx) 426 { 427 static const unsigned char shift[10] = 428 { 8, 20, 0, 3, 11, 23, 14, 26, 17, 29 }; 429 return shift[idx % 10]; 430 } 431 432 static int maya_pb_route_get(struct snd_kcontrol *kcontrol, 433 struct snd_ctl_elem_value *ucontrol) 434 { 435 struct snd_maya44 *chip = snd_kcontrol_chip(kcontrol); 436 int idx = snd_ctl_get_ioffidx(kcontrol, &ucontrol->id); 437 ucontrol->value.enumerated.item[0] = 438 snd_ice1724_get_route_val(chip->ice, maya_pb_route_shift(idx)); 439 return 0; 440 } 441 442 static int maya_pb_route_put(struct snd_kcontrol *kcontrol, 443 struct snd_ctl_elem_value *ucontrol) 444 { 445 struct snd_maya44 *chip = snd_kcontrol_chip(kcontrol); 446 int idx = snd_ctl_get_ioffidx(kcontrol, &ucontrol->id); 447 return snd_ice1724_put_route_val(chip->ice, 448 ucontrol->value.enumerated.item[0], 449 maya_pb_route_shift(idx)); 450 } 451 452 453 /* 454 * controls to be added 455 */ 456 457 static struct snd_kcontrol_new maya_controls[] = { 458 { 459 .name = "Crossmix Playback Volume", 460 .iface = SNDRV_CTL_ELEM_IFACE_MIXER, 461 .access = SNDRV_CTL_ELEM_ACCESS_READWRITE | 462 SNDRV_CTL_ELEM_ACCESS_TLV_READ, 463 .info = maya_vol_info, 464 .get = maya_vol_get, 465 .put = maya_vol_put, 466 .tlv = { .p = db_scale_hp }, 467 .private_value = WM_VOL_HP, 468 .count = 2, 469 }, 470 { 471 .name = "PCM Playback Volume", 472 .iface = SNDRV_CTL_ELEM_IFACE_MIXER, 473 .access = SNDRV_CTL_ELEM_ACCESS_READWRITE | 474 SNDRV_CTL_ELEM_ACCESS_TLV_READ, 475 .info = maya_vol_info, 476 .get = maya_vol_get, 477 .put = maya_vol_put, 478 .tlv = { .p = db_scale_dac }, 479 .private_value = WM_VOL_DAC, 480 .count = 2, 481 }, 482 { 483 .name = "Line Capture Volume", 484 .iface = SNDRV_CTL_ELEM_IFACE_MIXER, 485 .access = SNDRV_CTL_ELEM_ACCESS_READWRITE | 486 SNDRV_CTL_ELEM_ACCESS_TLV_READ, 487 .info = maya_vol_info, 488 .get = maya_vol_get, 489 .put = maya_vol_put, 490 .tlv = { .p = db_scale_adc }, 491 .private_value = WM_VOL_ADC, 492 .count = 2, 493 }, 494 { 495 .name = "PCM Playback Switch", 496 .iface = SNDRV_CTL_ELEM_IFACE_MIXER, 497 .info = maya_sw_info, 498 .get = maya_sw_get, 499 .put = maya_sw_put, 500 .private_value = COMPOSE_SW_VAL(WM_SW_DAC, 501 WM8776_REG_OUTPUT_MUX, 0x01), 502 .count = 2, 503 }, 504 { 505 .name = "Bypass Playback Switch", 506 .iface = SNDRV_CTL_ELEM_IFACE_MIXER, 507 .info = maya_sw_info, 508 .get = maya_sw_get, 509 .put = maya_sw_put, 510 .private_value = COMPOSE_SW_VAL(WM_SW_BYPASS, 511 WM8776_REG_OUTPUT_MUX, 0x04), 512 .count = 2, 513 }, 514 { 515 .name = "Capture Source", 516 .iface = SNDRV_CTL_ELEM_IFACE_MIXER, 517 .info = maya_rec_src_info, 518 .get = maya_rec_src_get, 519 .put = maya_rec_src_put, 520 }, 521 { 522 .name = "Mic Phantom Power Switch", 523 .iface = SNDRV_CTL_ELEM_IFACE_MIXER, 524 .info = maya_gpio_sw_info, 525 .get = maya_gpio_sw_get, 526 .put = maya_gpio_sw_put, 527 .private_value = COMPOSE_GPIO_VAL(GPIO_PHANTOM_OFF, 1), 528 }, 529 { 530 .name = "SPDIF Capture Switch", 531 .iface = SNDRV_CTL_ELEM_IFACE_MIXER, 532 .info = maya_gpio_sw_info, 533 .get = maya_gpio_sw_get, 534 .put = maya_gpio_sw_put, 535 .private_value = COMPOSE_GPIO_VAL(GPIO_SPDIF_IN_INV, 1), 536 }, 537 { 538 .iface = SNDRV_CTL_ELEM_IFACE_MIXER, 539 .name = "H/W Playback Route", 540 .info = maya_pb_route_info, 541 .get = maya_pb_route_get, 542 .put = maya_pb_route_put, 543 .count = 4, /* FIXME: do controls 5-9 have any meaning? */ 544 }, 545 }; 546 547 static int maya44_add_controls(struct snd_ice1712 *ice) 548 { 549 int err, i; 550 551 for (i = 0; i < ARRAY_SIZE(maya_controls); i++) { 552 err = snd_ctl_add(ice->card, snd_ctl_new1(&maya_controls[i], 553 ice->spec)); 554 if (err < 0) 555 return err; 556 } 557 return 0; 558 } 559 560 561 /* 562 * initialize a wm8776 chip 563 */ 564 static void wm8776_init(struct snd_ice1712 *ice, 565 struct snd_wm8776 *wm, unsigned int addr) 566 { 567 static const unsigned short inits_wm8776[] = { 568 0x02, 0x100, /* R2: headphone L+R muted + update */ 569 0x05, 0x100, /* R5: DAC output L+R muted + update */ 570 0x06, 0x000, /* R6: DAC output phase normal */ 571 0x07, 0x091, /* R7: DAC enable zero cross detection, 572 normal output */ 573 0x08, 0x000, /* R8: DAC soft mute off */ 574 0x09, 0x000, /* R9: no deemph, DAC zero detect disabled */ 575 0x0a, 0x022, /* R10: DAC I2C mode, std polarities, 24bit */ 576 0x0b, 0x022, /* R11: ADC I2C mode, std polarities, 24bit, 577 highpass filter enabled */ 578 0x0c, 0x042, /* R12: ADC+DAC slave, ADC+DAC 44,1kHz */ 579 0x0d, 0x000, /* R13: all power up */ 580 0x0e, 0x100, /* R14: ADC left muted, 581 enable zero cross detection */ 582 0x0f, 0x100, /* R15: ADC right muted, 583 enable zero cross detection */ 584 /* R16: ALC...*/ 585 0x11, 0x000, /* R17: disable ALC */ 586 /* R18: ALC...*/ 587 /* R19: noise gate...*/ 588 0x15, 0x000, /* R21: ADC input mux init, mute all inputs */ 589 0x16, 0x001, /* R22: output mux, select DAC */ 590 0xff, 0xff 591 }; 592 593 const unsigned short *ptr; 594 unsigned char reg; 595 unsigned short data; 596 597 wm->addr = addr; 598 /* enable DAC output; mute bypass, aux & all inputs */ 599 wm->switch_bits = (1 << WM_SW_DAC); 600 601 ptr = inits_wm8776; 602 while (*ptr != 0xff) { 603 reg = *ptr++; 604 data = *ptr++; 605 wm8776_write(ice, wm, reg, data); 606 } 607 } 608 609 610 /* 611 * change the rate on the WM8776 codecs. 612 * this assumes that the VT17xx's rate is changed by the calling function. 613 * NOTE: even though the WM8776's are running in slave mode and rate 614 * selection is automatic, we need to call snd_wm8776_set_rate() here 615 * to make sure some flags are set correctly. 616 */ 617 static void set_rate(struct snd_ice1712 *ice, unsigned int rate) 618 { 619 struct snd_maya44 *chip = ice->spec; 620 unsigned int ratio, adc_ratio, val; 621 int i; 622 623 switch (rate) { 624 case 192000: 625 ratio = WM8776_CLOCK_RATIO_128FS; 626 break; 627 case 176400: 628 ratio = WM8776_CLOCK_RATIO_128FS; 629 break; 630 case 96000: 631 ratio = WM8776_CLOCK_RATIO_256FS; 632 break; 633 case 88200: 634 ratio = WM8776_CLOCK_RATIO_384FS; 635 break; 636 case 48000: 637 ratio = WM8776_CLOCK_RATIO_512FS; 638 break; 639 case 44100: 640 ratio = WM8776_CLOCK_RATIO_512FS; 641 break; 642 case 32000: 643 ratio = WM8776_CLOCK_RATIO_768FS; 644 break; 645 case 0: 646 /* no hint - S/PDIF input is master, simply return */ 647 return; 648 default: 649 snd_BUG(); 650 return; 651 } 652 653 /* 654 * this currently sets the same rate for ADC and DAC, but limits 655 * ADC rate to 256X (96kHz). For 256X mode (96kHz), this sets ADC 656 * oversampling to 64x, as recommended by WM8776 datasheet. 657 * Setting the rate is not really necessary in slave mode. 658 */ 659 adc_ratio = ratio; 660 if (adc_ratio < WM8776_CLOCK_RATIO_256FS) 661 adc_ratio = WM8776_CLOCK_RATIO_256FS; 662 663 val = adc_ratio; 664 if (adc_ratio == WM8776_CLOCK_RATIO_256FS) 665 val |= 8; 666 val |= ratio << 4; 667 668 mutex_lock(&chip->mutex); 669 for (i = 0; i < 2; i++) 670 wm8776_write_bits(ice, &chip->wm[i], 671 WM8776_REG_MASTER_MODE_CONTROL, 672 0x180, val); 673 mutex_unlock(&chip->mutex); 674 } 675 676 /* 677 * supported sample rates (to override the default one) 678 */ 679 680 static unsigned int rates[] = { 681 32000, 44100, 48000, 64000, 88200, 96000, 176400, 192000 682 }; 683 684 /* playback rates: 32..192 kHz */ 685 static struct snd_pcm_hw_constraint_list dac_rates = { 686 .count = ARRAY_SIZE(rates), 687 .list = rates, 688 .mask = 0 689 }; 690 691 692 /* 693 * chip addresses on I2C bus 694 */ 695 static unsigned char wm8776_addr[2] = { 696 0x34, 0x36, /* codec 0 & 1 */ 697 }; 698 699 /* 700 * initialize the chip 701 */ 702 static int maya44_init(struct snd_ice1712 *ice) 703 { 704 int i; 705 struct snd_maya44 *chip; 706 707 chip = kzalloc(sizeof(*chip), GFP_KERNEL); 708 if (!chip) 709 return -ENOMEM; 710 mutex_init(&chip->mutex); 711 chip->ice = ice; 712 ice->spec = chip; 713 714 /* initialise codecs */ 715 ice->num_total_dacs = 4; 716 ice->num_total_adcs = 4; 717 ice->akm_codecs = 0; 718 719 for (i = 0; i < 2; i++) { 720 wm8776_init(ice, &chip->wm[i], wm8776_addr[i]); 721 wm8776_select_input(chip, i, MAYA_LINE_IN); 722 } 723 724 /* set card specific rates */ 725 ice->hw_rates = &dac_rates; 726 727 /* register change rate notifier */ 728 ice->gpio.set_pro_rate = set_rate; 729 730 /* RDMA1 (2nd input channel) is used for ADC by default */ 731 ice->force_rdma1 = 1; 732 733 /* have an own routing control */ 734 ice->own_routing = 1; 735 736 return 0; 737 } 738 739 740 /* 741 * Maya44 boards don't provide the EEPROM data except for the vendor IDs. 742 * hence the driver needs to sets up it properly. 743 */ 744 745 static unsigned char maya44_eeprom[] = { 746 [ICE_EEP2_SYSCONF] = 0x45, 747 /* clock xin1=49.152MHz, mpu401, 2 stereo ADCs+DACs */ 748 [ICE_EEP2_ACLINK] = 0x80, 749 /* I2S */ 750 [ICE_EEP2_I2S] = 0xf8, 751 /* vol, 96k, 24bit, 192k */ 752 [ICE_EEP2_SPDIF] = 0xc3, 753 /* enable spdif out, spdif out supp, spdif-in, ext spdif out */ 754 [ICE_EEP2_GPIO_DIR] = 0xff, 755 [ICE_EEP2_GPIO_DIR1] = 0xff, 756 [ICE_EEP2_GPIO_DIR2] = 0xff, 757 [ICE_EEP2_GPIO_MASK] = 0/*0x9f*/, 758 [ICE_EEP2_GPIO_MASK1] = 0/*0xff*/, 759 [ICE_EEP2_GPIO_MASK2] = 0/*0x7f*/, 760 [ICE_EEP2_GPIO_STATE] = (1 << GPIO_PHANTOM_OFF) | 761 (1 << GPIO_SPDIF_IN_INV), 762 [ICE_EEP2_GPIO_STATE1] = 0x00, 763 [ICE_EEP2_GPIO_STATE2] = 0x00, 764 }; 765 766 /* entry point */ 767 struct snd_ice1712_card_info snd_vt1724_maya44_cards[] = { 768 { 769 .subvendor = VT1724_SUBDEVICE_MAYA44, 770 .name = "ESI Maya44", 771 .model = "maya44", 772 .chip_init = maya44_init, 773 .build_controls = maya44_add_controls, 774 .eeprom_size = sizeof(maya44_eeprom), 775 .eeprom_data = maya44_eeprom, 776 }, 777 { } /* terminator */ 778 }; 779