1 /* 2 * HD audio interface patch for Conexant HDA audio codec 3 * 4 * Copyright (c) 2006 Pototskiy Akex <alex.pototskiy@gmail.com> 5 * Takashi Iwai <tiwai@suse.de> 6 * Tobin Davis <tdavis@dsl-only.net> 7 * 8 * This driver is free software; you can redistribute it and/or modify 9 * it under the terms of the GNU General Public License as published by 10 * the Free Software Foundation; either version 2 of the License, or 11 * (at your option) any later version. 12 * 13 * This driver is distributed in the hope that it will be useful, 14 * but WITHOUT ANY WARRANTY; without even the implied warranty of 15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 16 * GNU General Public License for more details. 17 * 18 * You should have received a copy of the GNU General Public License 19 * along with this program; if not, write to the Free Software 20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA 21 */ 22 23 #include <linux/init.h> 24 #include <linux/delay.h> 25 #include <linux/slab.h> 26 #include <linux/module.h> 27 #include <sound/core.h> 28 #include <sound/jack.h> 29 30 #include "hda_codec.h" 31 #include "hda_local.h" 32 #include "hda_auto_parser.h" 33 #include "hda_beep.h" 34 #include "hda_jack.h" 35 #include "hda_generic.h" 36 37 struct conexant_spec { 38 struct hda_gen_spec gen; 39 40 unsigned int beep_amp; 41 42 /* extra EAPD pins */ 43 unsigned int num_eapds; 44 hda_nid_t eapds[4]; 45 bool dynamic_eapd; 46 hda_nid_t mute_led_eapd; 47 48 unsigned int parse_flags; /* flag for snd_hda_parse_pin_defcfg() */ 49 50 /* OPLC XO specific */ 51 bool recording; 52 bool dc_enable; 53 unsigned int dc_input_bias; /* offset into olpc_xo_dc_bias */ 54 struct nid_path *dc_mode_path; 55 }; 56 57 58 #ifdef CONFIG_SND_HDA_INPUT_BEEP 59 static inline void set_beep_amp(struct conexant_spec *spec, hda_nid_t nid, 60 int idx, int dir) 61 { 62 spec->gen.beep_nid = nid; 63 spec->beep_amp = HDA_COMPOSE_AMP_VAL(nid, 1, idx, dir); 64 } 65 /* additional beep mixers; the actual parameters are overwritten at build */ 66 static const struct snd_kcontrol_new cxt_beep_mixer[] = { 67 HDA_CODEC_VOLUME_MONO("Beep Playback Volume", 0, 1, 0, HDA_OUTPUT), 68 HDA_CODEC_MUTE_BEEP_MONO("Beep Playback Switch", 0, 1, 0, HDA_OUTPUT), 69 { } /* end */ 70 }; 71 72 /* create beep controls if needed */ 73 static int add_beep_ctls(struct hda_codec *codec) 74 { 75 struct conexant_spec *spec = codec->spec; 76 int err; 77 78 if (spec->beep_amp) { 79 const struct snd_kcontrol_new *knew; 80 for (knew = cxt_beep_mixer; knew->name; knew++) { 81 struct snd_kcontrol *kctl; 82 kctl = snd_ctl_new1(knew, codec); 83 if (!kctl) 84 return -ENOMEM; 85 kctl->private_value = spec->beep_amp; 86 err = snd_hda_ctl_add(codec, 0, kctl); 87 if (err < 0) 88 return err; 89 } 90 } 91 return 0; 92 } 93 #else 94 #define set_beep_amp(spec, nid, idx, dir) /* NOP */ 95 #define add_beep_ctls(codec) 0 96 #endif 97 98 /* 99 * Automatic parser for CX20641 & co 100 */ 101 102 #ifdef CONFIG_SND_HDA_INPUT_BEEP 103 static void cx_auto_parse_beep(struct hda_codec *codec) 104 { 105 struct conexant_spec *spec = codec->spec; 106 hda_nid_t nid; 107 108 for_each_hda_codec_node(nid, codec) 109 if (get_wcaps_type(get_wcaps(codec, nid)) == AC_WID_BEEP) { 110 set_beep_amp(spec, nid, 0, HDA_OUTPUT); 111 break; 112 } 113 } 114 #else 115 #define cx_auto_parse_beep(codec) 116 #endif 117 118 /* parse EAPDs */ 119 static void cx_auto_parse_eapd(struct hda_codec *codec) 120 { 121 struct conexant_spec *spec = codec->spec; 122 hda_nid_t nid; 123 124 for_each_hda_codec_node(nid, codec) { 125 if (get_wcaps_type(get_wcaps(codec, nid)) != AC_WID_PIN) 126 continue; 127 if (!(snd_hda_query_pin_caps(codec, nid) & AC_PINCAP_EAPD)) 128 continue; 129 spec->eapds[spec->num_eapds++] = nid; 130 if (spec->num_eapds >= ARRAY_SIZE(spec->eapds)) 131 break; 132 } 133 134 /* NOTE: below is a wild guess; if we have more than two EAPDs, 135 * it's a new chip, where EAPDs are supposed to be associated to 136 * pins, and we can control EAPD per pin. 137 * OTOH, if only one or two EAPDs are found, it's an old chip, 138 * thus it might control over all pins. 139 */ 140 if (spec->num_eapds > 2) 141 spec->dynamic_eapd = 1; 142 } 143 144 static void cx_auto_turn_eapd(struct hda_codec *codec, int num_pins, 145 hda_nid_t *pins, bool on) 146 { 147 int i; 148 for (i = 0; i < num_pins; i++) { 149 if (snd_hda_query_pin_caps(codec, pins[i]) & AC_PINCAP_EAPD) 150 snd_hda_codec_write(codec, pins[i], 0, 151 AC_VERB_SET_EAPD_BTLENABLE, 152 on ? 0x02 : 0); 153 } 154 } 155 156 /* turn on/off EAPD according to Master switch */ 157 static void cx_auto_vmaster_hook(void *private_data, int enabled) 158 { 159 struct hda_codec *codec = private_data; 160 struct conexant_spec *spec = codec->spec; 161 162 cx_auto_turn_eapd(codec, spec->num_eapds, spec->eapds, enabled); 163 } 164 165 /* turn on/off EAPD according to Master switch (inversely!) for mute LED */ 166 static void cx_auto_vmaster_hook_mute_led(void *private_data, int enabled) 167 { 168 struct hda_codec *codec = private_data; 169 struct conexant_spec *spec = codec->spec; 170 171 snd_hda_codec_write(codec, spec->mute_led_eapd, 0, 172 AC_VERB_SET_EAPD_BTLENABLE, 173 enabled ? 0x00 : 0x02); 174 } 175 176 static int cx_auto_build_controls(struct hda_codec *codec) 177 { 178 int err; 179 180 err = snd_hda_gen_build_controls(codec); 181 if (err < 0) 182 return err; 183 184 err = add_beep_ctls(codec); 185 if (err < 0) 186 return err; 187 188 return 0; 189 } 190 191 static int cx_auto_init(struct hda_codec *codec) 192 { 193 struct conexant_spec *spec = codec->spec; 194 snd_hda_gen_init(codec); 195 if (!spec->dynamic_eapd) 196 cx_auto_turn_eapd(codec, spec->num_eapds, spec->eapds, true); 197 198 snd_hda_apply_fixup(codec, HDA_FIXUP_ACT_INIT); 199 200 return 0; 201 } 202 203 #define cx_auto_free snd_hda_gen_free 204 205 static const struct hda_codec_ops cx_auto_patch_ops = { 206 .build_controls = cx_auto_build_controls, 207 .build_pcms = snd_hda_gen_build_pcms, 208 .init = cx_auto_init, 209 .free = cx_auto_free, 210 .unsol_event = snd_hda_jack_unsol_event, 211 #ifdef CONFIG_PM 212 .check_power_status = snd_hda_gen_check_power_status, 213 #endif 214 }; 215 216 /* 217 * pin fix-up 218 */ 219 enum { 220 CXT_PINCFG_LENOVO_X200, 221 CXT_PINCFG_LENOVO_TP410, 222 CXT_PINCFG_LEMOTE_A1004, 223 CXT_PINCFG_LEMOTE_A1205, 224 CXT_PINCFG_COMPAQ_CQ60, 225 CXT_FIXUP_STEREO_DMIC, 226 CXT_FIXUP_INC_MIC_BOOST, 227 CXT_FIXUP_HEADPHONE_MIC_PIN, 228 CXT_FIXUP_HEADPHONE_MIC, 229 CXT_FIXUP_GPIO1, 230 CXT_FIXUP_ASPIRE_DMIC, 231 CXT_FIXUP_THINKPAD_ACPI, 232 CXT_FIXUP_OLPC_XO, 233 CXT_FIXUP_CAP_MIX_AMP, 234 CXT_FIXUP_TOSHIBA_P105, 235 CXT_FIXUP_HP_530, 236 CXT_FIXUP_CAP_MIX_AMP_5047, 237 CXT_FIXUP_MUTE_LED_EAPD, 238 }; 239 240 /* for hda_fixup_thinkpad_acpi() */ 241 #include "thinkpad_helper.c" 242 243 static void cxt_fixup_stereo_dmic(struct hda_codec *codec, 244 const struct hda_fixup *fix, int action) 245 { 246 struct conexant_spec *spec = codec->spec; 247 spec->gen.inv_dmic_split = 1; 248 } 249 250 static void cxt5066_increase_mic_boost(struct hda_codec *codec, 251 const struct hda_fixup *fix, int action) 252 { 253 if (action != HDA_FIXUP_ACT_PRE_PROBE) 254 return; 255 256 snd_hda_override_amp_caps(codec, 0x17, HDA_OUTPUT, 257 (0x3 << AC_AMPCAP_OFFSET_SHIFT) | 258 (0x4 << AC_AMPCAP_NUM_STEPS_SHIFT) | 259 (0x27 << AC_AMPCAP_STEP_SIZE_SHIFT) | 260 (0 << AC_AMPCAP_MUTE_SHIFT)); 261 } 262 263 static void cxt_update_headset_mode(struct hda_codec *codec) 264 { 265 /* The verbs used in this function were tested on a Conexant CX20751/2 codec. */ 266 int i; 267 bool mic_mode = false; 268 struct conexant_spec *spec = codec->spec; 269 struct auto_pin_cfg *cfg = &spec->gen.autocfg; 270 271 hda_nid_t mux_pin = spec->gen.imux_pins[spec->gen.cur_mux[0]]; 272 273 for (i = 0; i < cfg->num_inputs; i++) 274 if (cfg->inputs[i].pin == mux_pin) { 275 mic_mode = !!cfg->inputs[i].is_headphone_mic; 276 break; 277 } 278 279 if (mic_mode) { 280 snd_hda_codec_write_cache(codec, 0x1c, 0, 0x410, 0x7c); /* enable merged mode for analog int-mic */ 281 spec->gen.hp_jack_present = false; 282 } else { 283 snd_hda_codec_write_cache(codec, 0x1c, 0, 0x410, 0x54); /* disable merged mode for analog int-mic */ 284 spec->gen.hp_jack_present = snd_hda_jack_detect(codec, spec->gen.autocfg.hp_pins[0]); 285 } 286 287 snd_hda_gen_update_outputs(codec); 288 } 289 290 static void cxt_update_headset_mode_hook(struct hda_codec *codec, 291 struct snd_kcontrol *kcontrol, 292 struct snd_ctl_elem_value *ucontrol) 293 { 294 cxt_update_headset_mode(codec); 295 } 296 297 static void cxt_fixup_headphone_mic(struct hda_codec *codec, 298 const struct hda_fixup *fix, int action) 299 { 300 struct conexant_spec *spec = codec->spec; 301 302 switch (action) { 303 case HDA_FIXUP_ACT_PRE_PROBE: 304 spec->parse_flags |= HDA_PINCFG_HEADPHONE_MIC; 305 snd_hdac_regmap_add_vendor_verb(&codec->core, 0x410); 306 break; 307 case HDA_FIXUP_ACT_PROBE: 308 spec->gen.cap_sync_hook = cxt_update_headset_mode_hook; 309 spec->gen.automute_hook = cxt_update_headset_mode; 310 break; 311 case HDA_FIXUP_ACT_INIT: 312 cxt_update_headset_mode(codec); 313 break; 314 } 315 } 316 317 /* OPLC XO 1.5 fixup */ 318 319 /* OLPC XO-1.5 supports DC input mode (e.g. for use with analog sensors) 320 * through the microphone jack. 321 * When the user enables this through a mixer switch, both internal and 322 * external microphones are disabled. Gain is fixed at 0dB. In this mode, 323 * we also allow the bias to be configured through a separate mixer 324 * control. */ 325 326 #define update_mic_pin(codec, nid, val) \ 327 snd_hda_codec_update_cache(codec, nid, 0, \ 328 AC_VERB_SET_PIN_WIDGET_CONTROL, val) 329 330 static const struct hda_input_mux olpc_xo_dc_bias = { 331 .num_items = 3, 332 .items = { 333 { "Off", PIN_IN }, 334 { "50%", PIN_VREF50 }, 335 { "80%", PIN_VREF80 }, 336 }, 337 }; 338 339 static void olpc_xo_update_mic_boost(struct hda_codec *codec) 340 { 341 struct conexant_spec *spec = codec->spec; 342 int ch, val; 343 344 for (ch = 0; ch < 2; ch++) { 345 val = AC_AMP_SET_OUTPUT | 346 (ch ? AC_AMP_SET_RIGHT : AC_AMP_SET_LEFT); 347 if (!spec->dc_enable) 348 val |= snd_hda_codec_amp_read(codec, 0x17, ch, HDA_OUTPUT, 0); 349 snd_hda_codec_write(codec, 0x17, 0, 350 AC_VERB_SET_AMP_GAIN_MUTE, val); 351 } 352 } 353 354 static void olpc_xo_update_mic_pins(struct hda_codec *codec) 355 { 356 struct conexant_spec *spec = codec->spec; 357 int cur_input, val; 358 struct nid_path *path; 359 360 cur_input = spec->gen.input_paths[0][spec->gen.cur_mux[0]]; 361 362 /* Set up mic pins for port-B, C and F dynamically as the recording 363 * LED is turned on/off by these pin controls 364 */ 365 if (!spec->dc_enable) { 366 /* disable DC bias path and pin for port F */ 367 update_mic_pin(codec, 0x1e, 0); 368 snd_hda_activate_path(codec, spec->dc_mode_path, false, false); 369 370 /* update port B (ext mic) and C (int mic) */ 371 /* OLPC defers mic widget control until when capture is 372 * started because the microphone LED comes on as soon as 373 * these settings are put in place. if we did this before 374 * recording, it would give the false indication that 375 * recording is happening when it is not. 376 */ 377 update_mic_pin(codec, 0x1a, spec->recording ? 378 snd_hda_codec_get_pin_target(codec, 0x1a) : 0); 379 update_mic_pin(codec, 0x1b, spec->recording ? 380 snd_hda_codec_get_pin_target(codec, 0x1b) : 0); 381 /* enable normal mic path */ 382 path = snd_hda_get_path_from_idx(codec, cur_input); 383 if (path) 384 snd_hda_activate_path(codec, path, true, false); 385 } else { 386 /* disable normal mic path */ 387 path = snd_hda_get_path_from_idx(codec, cur_input); 388 if (path) 389 snd_hda_activate_path(codec, path, false, false); 390 391 /* Even though port F is the DC input, the bias is controlled 392 * on port B. We also leave that port as an active input (but 393 * unselected) in DC mode just in case that is necessary to 394 * make the bias setting take effect. 395 */ 396 if (spec->recording) 397 val = olpc_xo_dc_bias.items[spec->dc_input_bias].index; 398 else 399 val = 0; 400 update_mic_pin(codec, 0x1a, val); 401 update_mic_pin(codec, 0x1b, 0); 402 /* enable DC bias path and pin */ 403 update_mic_pin(codec, 0x1e, spec->recording ? PIN_IN : 0); 404 snd_hda_activate_path(codec, spec->dc_mode_path, true, false); 405 } 406 } 407 408 /* mic_autoswitch hook */ 409 static void olpc_xo_automic(struct hda_codec *codec, 410 struct hda_jack_callback *jack) 411 { 412 struct conexant_spec *spec = codec->spec; 413 414 /* in DC mode, we don't handle automic */ 415 if (!spec->dc_enable) 416 snd_hda_gen_mic_autoswitch(codec, jack); 417 olpc_xo_update_mic_pins(codec); 418 if (spec->dc_enable) 419 olpc_xo_update_mic_boost(codec); 420 } 421 422 /* pcm_capture hook */ 423 static void olpc_xo_capture_hook(struct hda_pcm_stream *hinfo, 424 struct hda_codec *codec, 425 struct snd_pcm_substream *substream, 426 int action) 427 { 428 struct conexant_spec *spec = codec->spec; 429 430 /* toggle spec->recording flag and update mic pins accordingly 431 * for turning on/off LED 432 */ 433 switch (action) { 434 case HDA_GEN_PCM_ACT_PREPARE: 435 spec->recording = 1; 436 olpc_xo_update_mic_pins(codec); 437 break; 438 case HDA_GEN_PCM_ACT_CLEANUP: 439 spec->recording = 0; 440 olpc_xo_update_mic_pins(codec); 441 break; 442 } 443 } 444 445 static int olpc_xo_dc_mode_get(struct snd_kcontrol *kcontrol, 446 struct snd_ctl_elem_value *ucontrol) 447 { 448 struct hda_codec *codec = snd_kcontrol_chip(kcontrol); 449 struct conexant_spec *spec = codec->spec; 450 ucontrol->value.integer.value[0] = spec->dc_enable; 451 return 0; 452 } 453 454 static int olpc_xo_dc_mode_put(struct snd_kcontrol *kcontrol, 455 struct snd_ctl_elem_value *ucontrol) 456 { 457 struct hda_codec *codec = snd_kcontrol_chip(kcontrol); 458 struct conexant_spec *spec = codec->spec; 459 int dc_enable = !!ucontrol->value.integer.value[0]; 460 461 if (dc_enable == spec->dc_enable) 462 return 0; 463 464 spec->dc_enable = dc_enable; 465 olpc_xo_update_mic_pins(codec); 466 olpc_xo_update_mic_boost(codec); 467 return 1; 468 } 469 470 static int olpc_xo_dc_bias_enum_get(struct snd_kcontrol *kcontrol, 471 struct snd_ctl_elem_value *ucontrol) 472 { 473 struct hda_codec *codec = snd_kcontrol_chip(kcontrol); 474 struct conexant_spec *spec = codec->spec; 475 ucontrol->value.enumerated.item[0] = spec->dc_input_bias; 476 return 0; 477 } 478 479 static int olpc_xo_dc_bias_enum_info(struct snd_kcontrol *kcontrol, 480 struct snd_ctl_elem_info *uinfo) 481 { 482 return snd_hda_input_mux_info(&olpc_xo_dc_bias, uinfo); 483 } 484 485 static int olpc_xo_dc_bias_enum_put(struct snd_kcontrol *kcontrol, 486 struct snd_ctl_elem_value *ucontrol) 487 { 488 struct hda_codec *codec = snd_kcontrol_chip(kcontrol); 489 struct conexant_spec *spec = codec->spec; 490 const struct hda_input_mux *imux = &olpc_xo_dc_bias; 491 unsigned int idx; 492 493 idx = ucontrol->value.enumerated.item[0]; 494 if (idx >= imux->num_items) 495 idx = imux->num_items - 1; 496 if (spec->dc_input_bias == idx) 497 return 0; 498 499 spec->dc_input_bias = idx; 500 if (spec->dc_enable) 501 olpc_xo_update_mic_pins(codec); 502 return 1; 503 } 504 505 static const struct snd_kcontrol_new olpc_xo_mixers[] = { 506 { 507 .iface = SNDRV_CTL_ELEM_IFACE_MIXER, 508 .name = "DC Mode Enable Switch", 509 .info = snd_ctl_boolean_mono_info, 510 .get = olpc_xo_dc_mode_get, 511 .put = olpc_xo_dc_mode_put, 512 }, 513 { 514 .iface = SNDRV_CTL_ELEM_IFACE_MIXER, 515 .name = "DC Input Bias Enum", 516 .info = olpc_xo_dc_bias_enum_info, 517 .get = olpc_xo_dc_bias_enum_get, 518 .put = olpc_xo_dc_bias_enum_put, 519 }, 520 {} 521 }; 522 523 /* overriding mic boost put callback; update mic boost volume only when 524 * DC mode is disabled 525 */ 526 static int olpc_xo_mic_boost_put(struct snd_kcontrol *kcontrol, 527 struct snd_ctl_elem_value *ucontrol) 528 { 529 struct hda_codec *codec = snd_kcontrol_chip(kcontrol); 530 struct conexant_spec *spec = codec->spec; 531 int ret = snd_hda_mixer_amp_volume_put(kcontrol, ucontrol); 532 if (ret > 0 && spec->dc_enable) 533 olpc_xo_update_mic_boost(codec); 534 return ret; 535 } 536 537 static void cxt_fixup_olpc_xo(struct hda_codec *codec, 538 const struct hda_fixup *fix, int action) 539 { 540 struct conexant_spec *spec = codec->spec; 541 int i; 542 543 if (action != HDA_FIXUP_ACT_PROBE) 544 return; 545 546 spec->gen.mic_autoswitch_hook = olpc_xo_automic; 547 spec->gen.pcm_capture_hook = olpc_xo_capture_hook; 548 spec->dc_mode_path = snd_hda_add_new_path(codec, 0x1e, 0x14, 0); 549 550 snd_hda_add_new_ctls(codec, olpc_xo_mixers); 551 552 /* OLPC's microphone port is DC coupled for use with external sensors, 553 * therefore we use a 50% mic bias in order to center the input signal 554 * with the DC input range of the codec. 555 */ 556 snd_hda_codec_set_pin_target(codec, 0x1a, PIN_VREF50); 557 558 /* override mic boost control */ 559 for (i = 0; i < spec->gen.kctls.used; i++) { 560 struct snd_kcontrol_new *kctl = 561 snd_array_elem(&spec->gen.kctls, i); 562 if (!strcmp(kctl->name, "Mic Boost Volume")) { 563 kctl->put = olpc_xo_mic_boost_put; 564 break; 565 } 566 } 567 } 568 569 static void cxt_fixup_mute_led_eapd(struct hda_codec *codec, 570 const struct hda_fixup *fix, int action) 571 { 572 struct conexant_spec *spec = codec->spec; 573 574 if (action == HDA_FIXUP_ACT_PRE_PROBE) { 575 spec->mute_led_eapd = 0x1b; 576 spec->dynamic_eapd = 1; 577 spec->gen.vmaster_mute.hook = cx_auto_vmaster_hook_mute_led; 578 } 579 } 580 581 /* 582 * Fix max input level on mixer widget to 0dB 583 * (originally it has 0x2b steps with 0dB offset 0x14) 584 */ 585 static void cxt_fixup_cap_mix_amp(struct hda_codec *codec, 586 const struct hda_fixup *fix, int action) 587 { 588 snd_hda_override_amp_caps(codec, 0x17, HDA_INPUT, 589 (0x14 << AC_AMPCAP_OFFSET_SHIFT) | 590 (0x14 << AC_AMPCAP_NUM_STEPS_SHIFT) | 591 (0x05 << AC_AMPCAP_STEP_SIZE_SHIFT) | 592 (1 << AC_AMPCAP_MUTE_SHIFT)); 593 } 594 595 /* 596 * Fix max input level on mixer widget to 0dB 597 * (originally it has 0x1e steps with 0 dB offset 0x17) 598 */ 599 static void cxt_fixup_cap_mix_amp_5047(struct hda_codec *codec, 600 const struct hda_fixup *fix, int action) 601 { 602 snd_hda_override_amp_caps(codec, 0x10, HDA_INPUT, 603 (0x17 << AC_AMPCAP_OFFSET_SHIFT) | 604 (0x17 << AC_AMPCAP_NUM_STEPS_SHIFT) | 605 (0x05 << AC_AMPCAP_STEP_SIZE_SHIFT) | 606 (1 << AC_AMPCAP_MUTE_SHIFT)); 607 } 608 609 /* ThinkPad X200 & co with cxt5051 */ 610 static const struct hda_pintbl cxt_pincfg_lenovo_x200[] = { 611 { 0x16, 0x042140ff }, /* HP (seq# overridden) */ 612 { 0x17, 0x21a11000 }, /* dock-mic */ 613 { 0x19, 0x2121103f }, /* dock-HP */ 614 { 0x1c, 0x21440100 }, /* dock SPDIF out */ 615 {} 616 }; 617 618 /* ThinkPad 410/420/510/520, X201 & co with cxt5066 */ 619 static const struct hda_pintbl cxt_pincfg_lenovo_tp410[] = { 620 { 0x19, 0x042110ff }, /* HP (seq# overridden) */ 621 { 0x1a, 0x21a190f0 }, /* dock-mic */ 622 { 0x1c, 0x212140ff }, /* dock-HP */ 623 {} 624 }; 625 626 /* Lemote A1004/A1205 with cxt5066 */ 627 static const struct hda_pintbl cxt_pincfg_lemote[] = { 628 { 0x1a, 0x90a10020 }, /* Internal mic */ 629 { 0x1b, 0x03a11020 }, /* External mic */ 630 { 0x1d, 0x400101f0 }, /* Not used */ 631 { 0x1e, 0x40a701f0 }, /* Not used */ 632 { 0x20, 0x404501f0 }, /* Not used */ 633 { 0x22, 0x404401f0 }, /* Not used */ 634 { 0x23, 0x40a701f0 }, /* Not used */ 635 {} 636 }; 637 638 static const struct hda_fixup cxt_fixups[] = { 639 [CXT_PINCFG_LENOVO_X200] = { 640 .type = HDA_FIXUP_PINS, 641 .v.pins = cxt_pincfg_lenovo_x200, 642 }, 643 [CXT_PINCFG_LENOVO_TP410] = { 644 .type = HDA_FIXUP_PINS, 645 .v.pins = cxt_pincfg_lenovo_tp410, 646 .chained = true, 647 .chain_id = CXT_FIXUP_THINKPAD_ACPI, 648 }, 649 [CXT_PINCFG_LEMOTE_A1004] = { 650 .type = HDA_FIXUP_PINS, 651 .chained = true, 652 .chain_id = CXT_FIXUP_INC_MIC_BOOST, 653 .v.pins = cxt_pincfg_lemote, 654 }, 655 [CXT_PINCFG_LEMOTE_A1205] = { 656 .type = HDA_FIXUP_PINS, 657 .v.pins = cxt_pincfg_lemote, 658 }, 659 [CXT_PINCFG_COMPAQ_CQ60] = { 660 .type = HDA_FIXUP_PINS, 661 .v.pins = (const struct hda_pintbl[]) { 662 /* 0x17 was falsely set up as a mic, it should 0x1d */ 663 { 0x17, 0x400001f0 }, 664 { 0x1d, 0x97a70120 }, 665 { } 666 } 667 }, 668 [CXT_FIXUP_STEREO_DMIC] = { 669 .type = HDA_FIXUP_FUNC, 670 .v.func = cxt_fixup_stereo_dmic, 671 }, 672 [CXT_FIXUP_INC_MIC_BOOST] = { 673 .type = HDA_FIXUP_FUNC, 674 .v.func = cxt5066_increase_mic_boost, 675 }, 676 [CXT_FIXUP_HEADPHONE_MIC_PIN] = { 677 .type = HDA_FIXUP_PINS, 678 .chained = true, 679 .chain_id = CXT_FIXUP_HEADPHONE_MIC, 680 .v.pins = (const struct hda_pintbl[]) { 681 { 0x18, 0x03a1913d }, /* use as headphone mic, without its own jack detect */ 682 { } 683 } 684 }, 685 [CXT_FIXUP_HEADPHONE_MIC] = { 686 .type = HDA_FIXUP_FUNC, 687 .v.func = cxt_fixup_headphone_mic, 688 }, 689 [CXT_FIXUP_GPIO1] = { 690 .type = HDA_FIXUP_VERBS, 691 .v.verbs = (const struct hda_verb[]) { 692 { 0x01, AC_VERB_SET_GPIO_MASK, 0x01 }, 693 { 0x01, AC_VERB_SET_GPIO_DIRECTION, 0x01 }, 694 { 0x01, AC_VERB_SET_GPIO_DATA, 0x01 }, 695 { } 696 }, 697 }, 698 [CXT_FIXUP_ASPIRE_DMIC] = { 699 .type = HDA_FIXUP_FUNC, 700 .v.func = cxt_fixup_stereo_dmic, 701 .chained = true, 702 .chain_id = CXT_FIXUP_GPIO1, 703 }, 704 [CXT_FIXUP_THINKPAD_ACPI] = { 705 .type = HDA_FIXUP_FUNC, 706 .v.func = hda_fixup_thinkpad_acpi, 707 }, 708 [CXT_FIXUP_OLPC_XO] = { 709 .type = HDA_FIXUP_FUNC, 710 .v.func = cxt_fixup_olpc_xo, 711 }, 712 [CXT_FIXUP_CAP_MIX_AMP] = { 713 .type = HDA_FIXUP_FUNC, 714 .v.func = cxt_fixup_cap_mix_amp, 715 }, 716 [CXT_FIXUP_TOSHIBA_P105] = { 717 .type = HDA_FIXUP_PINS, 718 .v.pins = (const struct hda_pintbl[]) { 719 { 0x10, 0x961701f0 }, /* speaker/hp */ 720 { 0x12, 0x02a1901e }, /* ext mic */ 721 { 0x14, 0x95a70110 }, /* int mic */ 722 {} 723 }, 724 }, 725 [CXT_FIXUP_HP_530] = { 726 .type = HDA_FIXUP_PINS, 727 .v.pins = (const struct hda_pintbl[]) { 728 { 0x12, 0x90a60160 }, /* int mic */ 729 {} 730 }, 731 .chained = true, 732 .chain_id = CXT_FIXUP_CAP_MIX_AMP, 733 }, 734 [CXT_FIXUP_CAP_MIX_AMP_5047] = { 735 .type = HDA_FIXUP_FUNC, 736 .v.func = cxt_fixup_cap_mix_amp_5047, 737 }, 738 [CXT_FIXUP_MUTE_LED_EAPD] = { 739 .type = HDA_FIXUP_FUNC, 740 .v.func = cxt_fixup_mute_led_eapd, 741 }, 742 }; 743 744 static const struct snd_pci_quirk cxt5045_fixups[] = { 745 SND_PCI_QUIRK(0x103c, 0x30d5, "HP 530", CXT_FIXUP_HP_530), 746 SND_PCI_QUIRK(0x1179, 0xff31, "Toshiba P105", CXT_FIXUP_TOSHIBA_P105), 747 /* HP, Packard Bell, Fujitsu-Siemens & Lenovo laptops have 748 * really bad sound over 0dB on NID 0x17. 749 */ 750 SND_PCI_QUIRK_VENDOR(0x103c, "HP", CXT_FIXUP_CAP_MIX_AMP), 751 SND_PCI_QUIRK_VENDOR(0x1631, "Packard Bell", CXT_FIXUP_CAP_MIX_AMP), 752 SND_PCI_QUIRK_VENDOR(0x1734, "Fujitsu", CXT_FIXUP_CAP_MIX_AMP), 753 SND_PCI_QUIRK_VENDOR(0x17aa, "Lenovo", CXT_FIXUP_CAP_MIX_AMP), 754 {} 755 }; 756 757 static const struct hda_model_fixup cxt5045_fixup_models[] = { 758 { .id = CXT_FIXUP_CAP_MIX_AMP, .name = "cap-mix-amp" }, 759 { .id = CXT_FIXUP_TOSHIBA_P105, .name = "toshiba-p105" }, 760 { .id = CXT_FIXUP_HP_530, .name = "hp-530" }, 761 {} 762 }; 763 764 static const struct snd_pci_quirk cxt5047_fixups[] = { 765 /* HP laptops have really bad sound over 0 dB on NID 0x10. 766 */ 767 SND_PCI_QUIRK_VENDOR(0x103c, "HP", CXT_FIXUP_CAP_MIX_AMP_5047), 768 {} 769 }; 770 771 static const struct hda_model_fixup cxt5047_fixup_models[] = { 772 { .id = CXT_FIXUP_CAP_MIX_AMP_5047, .name = "cap-mix-amp" }, 773 {} 774 }; 775 776 static const struct snd_pci_quirk cxt5051_fixups[] = { 777 SND_PCI_QUIRK(0x103c, 0x360b, "Compaq CQ60", CXT_PINCFG_COMPAQ_CQ60), 778 SND_PCI_QUIRK(0x17aa, 0x20f2, "Lenovo X200", CXT_PINCFG_LENOVO_X200), 779 {} 780 }; 781 782 static const struct hda_model_fixup cxt5051_fixup_models[] = { 783 { .id = CXT_PINCFG_LENOVO_X200, .name = "lenovo-x200" }, 784 {} 785 }; 786 787 static const struct snd_pci_quirk cxt5066_fixups[] = { 788 SND_PCI_QUIRK(0x1025, 0x0543, "Acer Aspire One 522", CXT_FIXUP_STEREO_DMIC), 789 SND_PCI_QUIRK(0x1025, 0x054c, "Acer Aspire 3830TG", CXT_FIXUP_ASPIRE_DMIC), 790 SND_PCI_QUIRK(0x1025, 0x054f, "Acer Aspire 4830T", CXT_FIXUP_ASPIRE_DMIC), 791 SND_PCI_QUIRK(0x1043, 0x138d, "Asus", CXT_FIXUP_HEADPHONE_MIC_PIN), 792 SND_PCI_QUIRK(0x152d, 0x0833, "OLPC XO-1.5", CXT_FIXUP_OLPC_XO), 793 SND_PCI_QUIRK(0x17aa, 0x20f2, "Lenovo T400", CXT_PINCFG_LENOVO_TP410), 794 SND_PCI_QUIRK(0x17aa, 0x215e, "Lenovo T410", CXT_PINCFG_LENOVO_TP410), 795 SND_PCI_QUIRK(0x17aa, 0x215f, "Lenovo T510", CXT_PINCFG_LENOVO_TP410), 796 SND_PCI_QUIRK(0x17aa, 0x21ce, "Lenovo T420", CXT_PINCFG_LENOVO_TP410), 797 SND_PCI_QUIRK(0x17aa, 0x21cf, "Lenovo T520", CXT_PINCFG_LENOVO_TP410), 798 SND_PCI_QUIRK(0x17aa, 0x21da, "Lenovo X220", CXT_PINCFG_LENOVO_TP410), 799 SND_PCI_QUIRK(0x17aa, 0x21db, "Lenovo X220-tablet", CXT_PINCFG_LENOVO_TP410), 800 SND_PCI_QUIRK(0x17aa, 0x38af, "Lenovo IdeaPad Z560", CXT_FIXUP_MUTE_LED_EAPD), 801 SND_PCI_QUIRK(0x17aa, 0x3975, "Lenovo U300s", CXT_FIXUP_STEREO_DMIC), 802 SND_PCI_QUIRK(0x17aa, 0x3977, "Lenovo IdeaPad U310", CXT_FIXUP_STEREO_DMIC), 803 SND_PCI_QUIRK(0x17aa, 0x397b, "Lenovo S205", CXT_FIXUP_STEREO_DMIC), 804 SND_PCI_QUIRK_VENDOR(0x17aa, "Thinkpad", CXT_FIXUP_THINKPAD_ACPI), 805 SND_PCI_QUIRK(0x1c06, 0x2011, "Lemote A1004", CXT_PINCFG_LEMOTE_A1004), 806 SND_PCI_QUIRK(0x1c06, 0x2012, "Lemote A1205", CXT_PINCFG_LEMOTE_A1205), 807 {} 808 }; 809 810 static const struct hda_model_fixup cxt5066_fixup_models[] = { 811 { .id = CXT_FIXUP_STEREO_DMIC, .name = "stereo-dmic" }, 812 { .id = CXT_FIXUP_GPIO1, .name = "gpio1" }, 813 { .id = CXT_FIXUP_HEADPHONE_MIC_PIN, .name = "headphone-mic-pin" }, 814 { .id = CXT_PINCFG_LENOVO_TP410, .name = "tp410" }, 815 { .id = CXT_FIXUP_THINKPAD_ACPI, .name = "thinkpad" }, 816 { .id = CXT_PINCFG_LEMOTE_A1004, .name = "lemote-a1004" }, 817 { .id = CXT_PINCFG_LEMOTE_A1205, .name = "lemote-a1205" }, 818 { .id = CXT_FIXUP_OLPC_XO, .name = "olpc-xo" }, 819 { .id = CXT_FIXUP_MUTE_LED_EAPD, .name = "mute-led-eapd" }, 820 {} 821 }; 822 823 /* add "fake" mute amp-caps to DACs on cx5051 so that mixer mute switches 824 * can be created (bko#42825) 825 */ 826 static void add_cx5051_fake_mutes(struct hda_codec *codec) 827 { 828 struct conexant_spec *spec = codec->spec; 829 static hda_nid_t out_nids[] = { 830 0x10, 0x11, 0 831 }; 832 hda_nid_t *p; 833 834 for (p = out_nids; *p; p++) 835 snd_hda_override_amp_caps(codec, *p, HDA_OUTPUT, 836 AC_AMPCAP_MIN_MUTE | 837 query_amp_caps(codec, *p, HDA_OUTPUT)); 838 spec->gen.dac_min_mute = true; 839 } 840 841 static int patch_conexant_auto(struct hda_codec *codec) 842 { 843 struct conexant_spec *spec; 844 int err; 845 846 codec_info(codec, "%s: BIOS auto-probing.\n", codec->core.chip_name); 847 848 spec = kzalloc(sizeof(*spec), GFP_KERNEL); 849 if (!spec) 850 return -ENOMEM; 851 snd_hda_gen_spec_init(&spec->gen); 852 codec->spec = spec; 853 854 cx_auto_parse_beep(codec); 855 cx_auto_parse_eapd(codec); 856 spec->gen.own_eapd_ctl = 1; 857 if (spec->dynamic_eapd) 858 spec->gen.vmaster_mute.hook = cx_auto_vmaster_hook; 859 860 switch (codec->core.vendor_id) { 861 case 0x14f15045: 862 codec->single_adc_amp = 1; 863 spec->gen.mixer_nid = 0x17; 864 spec->gen.add_stereo_mix_input = HDA_HINT_STEREO_MIX_AUTO; 865 snd_hda_pick_fixup(codec, cxt5045_fixup_models, 866 cxt5045_fixups, cxt_fixups); 867 break; 868 case 0x14f15047: 869 codec->pin_amp_workaround = 1; 870 spec->gen.mixer_nid = 0x19; 871 spec->gen.add_stereo_mix_input = HDA_HINT_STEREO_MIX_AUTO; 872 snd_hda_pick_fixup(codec, cxt5047_fixup_models, 873 cxt5047_fixups, cxt_fixups); 874 break; 875 case 0x14f15051: 876 add_cx5051_fake_mutes(codec); 877 codec->pin_amp_workaround = 1; 878 snd_hda_pick_fixup(codec, cxt5051_fixup_models, 879 cxt5051_fixups, cxt_fixups); 880 break; 881 default: 882 codec->pin_amp_workaround = 1; 883 snd_hda_pick_fixup(codec, cxt5066_fixup_models, 884 cxt5066_fixups, cxt_fixups); 885 break; 886 } 887 888 /* Show mute-led control only on HP laptops 889 * This is a sort of white-list: on HP laptops, EAPD corresponds 890 * only to the mute-LED without actualy amp function. Meanwhile, 891 * others may use EAPD really as an amp switch, so it might be 892 * not good to expose it blindly. 893 */ 894 switch (codec->core.subsystem_id >> 16) { 895 case 0x103c: 896 spec->gen.vmaster_mute_enum = 1; 897 break; 898 } 899 900 snd_hda_apply_fixup(codec, HDA_FIXUP_ACT_PRE_PROBE); 901 902 err = snd_hda_parse_pin_defcfg(codec, &spec->gen.autocfg, NULL, 903 spec->parse_flags); 904 if (err < 0) 905 goto error; 906 907 err = snd_hda_gen_parse_auto_config(codec, &spec->gen.autocfg); 908 if (err < 0) 909 goto error; 910 911 codec->patch_ops = cx_auto_patch_ops; 912 913 /* Some laptops with Conexant chips show stalls in S3 resume, 914 * which falls into the single-cmd mode. 915 * Better to make reset, then. 916 */ 917 if (!codec->bus->core.sync_write) { 918 codec_info(codec, 919 "Enable sync_write for stable communication\n"); 920 codec->bus->core.sync_write = 1; 921 codec->bus->allow_bus_reset = 1; 922 } 923 924 snd_hda_apply_fixup(codec, HDA_FIXUP_ACT_PROBE); 925 926 return 0; 927 928 error: 929 cx_auto_free(codec); 930 return err; 931 } 932 933 /* 934 */ 935 936 static const struct hda_codec_preset snd_hda_preset_conexant[] = { 937 { .id = 0x14f15045, .name = "CX20549 (Venice)", 938 .patch = patch_conexant_auto }, 939 { .id = 0x14f15047, .name = "CX20551 (Waikiki)", 940 .patch = patch_conexant_auto }, 941 { .id = 0x14f15051, .name = "CX20561 (Hermosa)", 942 .patch = patch_conexant_auto }, 943 { .id = 0x14f15066, .name = "CX20582 (Pebble)", 944 .patch = patch_conexant_auto }, 945 { .id = 0x14f15067, .name = "CX20583 (Pebble HSF)", 946 .patch = patch_conexant_auto }, 947 { .id = 0x14f15068, .name = "CX20584", 948 .patch = patch_conexant_auto }, 949 { .id = 0x14f15069, .name = "CX20585", 950 .patch = patch_conexant_auto }, 951 { .id = 0x14f1506c, .name = "CX20588", 952 .patch = patch_conexant_auto }, 953 { .id = 0x14f1506e, .name = "CX20590", 954 .patch = patch_conexant_auto }, 955 { .id = 0x14f15097, .name = "CX20631", 956 .patch = patch_conexant_auto }, 957 { .id = 0x14f15098, .name = "CX20632", 958 .patch = patch_conexant_auto }, 959 { .id = 0x14f150a1, .name = "CX20641", 960 .patch = patch_conexant_auto }, 961 { .id = 0x14f150a2, .name = "CX20642", 962 .patch = patch_conexant_auto }, 963 { .id = 0x14f150ab, .name = "CX20651", 964 .patch = patch_conexant_auto }, 965 { .id = 0x14f150ac, .name = "CX20652", 966 .patch = patch_conexant_auto }, 967 { .id = 0x14f150b8, .name = "CX20664", 968 .patch = patch_conexant_auto }, 969 { .id = 0x14f150b9, .name = "CX20665", 970 .patch = patch_conexant_auto }, 971 { .id = 0x14f1510f, .name = "CX20751/2", 972 .patch = patch_conexant_auto }, 973 { .id = 0x14f15110, .name = "CX20751/2", 974 .patch = patch_conexant_auto }, 975 { .id = 0x14f15111, .name = "CX20753/4", 976 .patch = patch_conexant_auto }, 977 { .id = 0x14f15113, .name = "CX20755", 978 .patch = patch_conexant_auto }, 979 { .id = 0x14f15114, .name = "CX20756", 980 .patch = patch_conexant_auto }, 981 { .id = 0x14f15115, .name = "CX20757", 982 .patch = patch_conexant_auto }, 983 { .id = 0x14f151d7, .name = "CX20952", 984 .patch = patch_conexant_auto }, 985 {} /* terminator */ 986 }; 987 988 MODULE_ALIAS("snd-hda-codec-id:14f15045"); 989 MODULE_ALIAS("snd-hda-codec-id:14f15047"); 990 MODULE_ALIAS("snd-hda-codec-id:14f15051"); 991 MODULE_ALIAS("snd-hda-codec-id:14f15066"); 992 MODULE_ALIAS("snd-hda-codec-id:14f15067"); 993 MODULE_ALIAS("snd-hda-codec-id:14f15068"); 994 MODULE_ALIAS("snd-hda-codec-id:14f15069"); 995 MODULE_ALIAS("snd-hda-codec-id:14f1506c"); 996 MODULE_ALIAS("snd-hda-codec-id:14f1506e"); 997 MODULE_ALIAS("snd-hda-codec-id:14f15097"); 998 MODULE_ALIAS("snd-hda-codec-id:14f15098"); 999 MODULE_ALIAS("snd-hda-codec-id:14f150a1"); 1000 MODULE_ALIAS("snd-hda-codec-id:14f150a2"); 1001 MODULE_ALIAS("snd-hda-codec-id:14f150ab"); 1002 MODULE_ALIAS("snd-hda-codec-id:14f150ac"); 1003 MODULE_ALIAS("snd-hda-codec-id:14f150b8"); 1004 MODULE_ALIAS("snd-hda-codec-id:14f150b9"); 1005 MODULE_ALIAS("snd-hda-codec-id:14f1510f"); 1006 MODULE_ALIAS("snd-hda-codec-id:14f15110"); 1007 MODULE_ALIAS("snd-hda-codec-id:14f15111"); 1008 MODULE_ALIAS("snd-hda-codec-id:14f15113"); 1009 MODULE_ALIAS("snd-hda-codec-id:14f15114"); 1010 MODULE_ALIAS("snd-hda-codec-id:14f15115"); 1011 MODULE_ALIAS("snd-hda-codec-id:14f151d7"); 1012 1013 MODULE_LICENSE("GPL"); 1014 MODULE_DESCRIPTION("Conexant HD-audio codec"); 1015 1016 static struct hda_codec_driver conexant_driver = { 1017 .preset = snd_hda_preset_conexant, 1018 }; 1019 1020 module_hda_codec_driver(conexant_driver); 1021