xref: /openbmc/linux/sound/pci/echoaudio/mia_dsp.c (revision e3b9f1e8)
1 /****************************************************************************
2 
3    Copyright Echo Digital Audio Corporation (c) 1998 - 2004
4    All rights reserved
5    www.echoaudio.com
6 
7    This file is part of Echo Digital Audio's generic driver library.
8 
9    Echo Digital Audio's generic driver library is free software;
10    you can redistribute it and/or modify it under the terms of
11    the GNU General Public License as published by the Free Software
12    Foundation.
13 
14    This program is distributed in the hope that it will be useful,
15    but WITHOUT ANY WARRANTY; without even the implied warranty of
16    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
17    GNU General Public License for more details.
18 
19    You should have received a copy of the GNU General Public License
20    along with this program; if not, write to the Free Software
21    Foundation, Inc., 59 Temple Place - Suite 330, Boston,
22    MA  02111-1307, USA.
23 
24    *************************************************************************
25 
26  Translation from C++ and adaptation for use in ALSA-Driver
27  were made by Giuliano Pochini <pochini@shiny.it>
28 
29 ****************************************************************************/
30 
31 
32 static int set_input_clock(struct echoaudio *chip, u16 clock);
33 static int set_professional_spdif(struct echoaudio *chip, char prof);
34 static int update_flags(struct echoaudio *chip);
35 static int set_vmixer_gain(struct echoaudio *chip, u16 output, u16 pipe,
36 			   int gain);
37 static int update_vmixer_level(struct echoaudio *chip);
38 
39 
40 static int init_hw(struct echoaudio *chip, u16 device_id, u16 subdevice_id)
41 {
42 	int err;
43 
44 	if (snd_BUG_ON((subdevice_id & 0xfff0) != MIA))
45 		return -ENODEV;
46 
47 	if ((err = init_dsp_comm_page(chip))) {
48 		dev_err(chip->card->dev,
49 			"init_hw - could not initialize DSP comm page\n");
50 		return err;
51 	}
52 
53 	chip->device_id = device_id;
54 	chip->subdevice_id = subdevice_id;
55 	chip->bad_board = true;
56 	chip->dsp_code_to_load = FW_MIA_DSP;
57 	/* Since this card has no ASIC, mark it as loaded so everything
58 	   works OK */
59 	chip->asic_loaded = true;
60 	if ((subdevice_id & 0x0000f) == MIA_MIDI_REV)
61 		chip->has_midi = true;
62 	chip->input_clock_types = ECHO_CLOCK_BIT_INTERNAL |
63 		ECHO_CLOCK_BIT_SPDIF;
64 
65 	if ((err = load_firmware(chip)) < 0)
66 		return err;
67 	chip->bad_board = false;
68 
69 	return err;
70 }
71 
72 
73 
74 static int set_mixer_defaults(struct echoaudio *chip)
75 {
76 	return init_line_levels(chip);
77 }
78 
79 
80 
81 static u32 detect_input_clocks(const struct echoaudio *chip)
82 {
83 	u32 clocks_from_dsp, clock_bits;
84 
85 	/* Map the DSP clock detect bits to the generic driver clock
86 	   detect bits */
87 	clocks_from_dsp = le32_to_cpu(chip->comm_page->status_clocks);
88 
89 	clock_bits = ECHO_CLOCK_BIT_INTERNAL;
90 
91 	if (clocks_from_dsp & GLDM_CLOCK_DETECT_BIT_SPDIF)
92 		clock_bits |= ECHO_CLOCK_BIT_SPDIF;
93 
94 	return clock_bits;
95 }
96 
97 
98 
99 /* The Mia has no ASIC. Just do nothing */
100 static int load_asic(struct echoaudio *chip)
101 {
102 	return 0;
103 }
104 
105 
106 
107 static int set_sample_rate(struct echoaudio *chip, u32 rate)
108 {
109 	u32 control_reg;
110 
111 	switch (rate) {
112 	case 96000:
113 		control_reg = MIA_96000;
114 		break;
115 	case 88200:
116 		control_reg = MIA_88200;
117 		break;
118 	case 48000:
119 		control_reg = MIA_48000;
120 		break;
121 	case 44100:
122 		control_reg = MIA_44100;
123 		break;
124 	case 32000:
125 		control_reg = MIA_32000;
126 		break;
127 	default:
128 		dev_err(chip->card->dev,
129 			"set_sample_rate: %d invalid!\n", rate);
130 		return -EINVAL;
131 	}
132 
133 	/* Override the clock setting if this Mia is set to S/PDIF clock */
134 	if (chip->input_clock == ECHO_CLOCK_SPDIF)
135 		control_reg |= MIA_SPDIF;
136 
137 	/* Set the control register if it has changed */
138 	if (control_reg != le32_to_cpu(chip->comm_page->control_register)) {
139 		if (wait_handshake(chip))
140 			return -EIO;
141 
142 		chip->comm_page->sample_rate = cpu_to_le32(rate);	/* ignored by the DSP */
143 		chip->comm_page->control_register = cpu_to_le32(control_reg);
144 		chip->sample_rate = rate;
145 
146 		clear_handshake(chip);
147 		return send_vector(chip, DSP_VC_UPDATE_CLOCKS);
148 	}
149 	return 0;
150 }
151 
152 
153 
154 static int set_input_clock(struct echoaudio *chip, u16 clock)
155 {
156 	dev_dbg(chip->card->dev, "set_input_clock(%d)\n", clock);
157 	if (snd_BUG_ON(clock != ECHO_CLOCK_INTERNAL &&
158 		       clock != ECHO_CLOCK_SPDIF))
159 		return -EINVAL;
160 
161 	chip->input_clock = clock;
162 	return set_sample_rate(chip, chip->sample_rate);
163 }
164 
165 
166 
167 /* This function routes the sound from a virtual channel to a real output */
168 static int set_vmixer_gain(struct echoaudio *chip, u16 output, u16 pipe,
169 			   int gain)
170 {
171 	int index;
172 
173 	if (snd_BUG_ON(pipe >= num_pipes_out(chip) ||
174 		       output >= num_busses_out(chip)))
175 		return -EINVAL;
176 
177 	if (wait_handshake(chip))
178 		return -EIO;
179 
180 	chip->vmixer_gain[output][pipe] = gain;
181 	index = output * num_pipes_out(chip) + pipe;
182 	chip->comm_page->vmixer[index] = gain;
183 
184 	dev_dbg(chip->card->dev,
185 		"set_vmixer_gain: pipe %d, out %d = %d\n", pipe, output, gain);
186 	return 0;
187 }
188 
189 
190 
191 /* Tell the DSP to read and update virtual mixer levels in comm page. */
192 static int update_vmixer_level(struct echoaudio *chip)
193 {
194 	if (wait_handshake(chip))
195 		return -EIO;
196 	clear_handshake(chip);
197 	return send_vector(chip, DSP_VC_SET_VMIXER_GAIN);
198 }
199 
200 
201 
202 /* Tell the DSP to reread the flags from the comm page */
203 static int update_flags(struct echoaudio *chip)
204 {
205 	if (wait_handshake(chip))
206 		return -EIO;
207 	clear_handshake(chip);
208 	return send_vector(chip, DSP_VC_UPDATE_FLAGS);
209 }
210 
211 
212 
213 static int set_professional_spdif(struct echoaudio *chip, char prof)
214 {
215 	dev_dbg(chip->card->dev, "set_professional_spdif %d\n", prof);
216 	if (prof)
217 		chip->comm_page->flags |=
218 			cpu_to_le32(DSP_FLAG_PROFESSIONAL_SPDIF);
219 	else
220 		chip->comm_page->flags &=
221 			~cpu_to_le32(DSP_FLAG_PROFESSIONAL_SPDIF);
222 	chip->professional_spdif = prof;
223 	return update_flags(chip);
224 }
225 
226