xref: /openbmc/linux/sound/pci/echoaudio/indigo_dsp.c (revision 6ee73861)
1 /****************************************************************************
2 
3    Copyright Echo Digital Audio Corporation (c) 1998 - 2004
4    All rights reserved
5    www.echoaudio.com
6 
7    This file is part of Echo Digital Audio's generic driver library.
8 
9    Echo Digital Audio's generic driver library is free software;
10    you can redistribute it and/or modify it under the terms of
11    the GNU General Public License as published by the Free Software
12    Foundation.
13 
14    This program is distributed in the hope that it will be useful,
15    but WITHOUT ANY WARRANTY; without even the implied warranty of
16    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
17    GNU General Public License for more details.
18 
19    You should have received a copy of the GNU General Public License
20    along with this program; if not, write to the Free Software
21    Foundation, Inc., 59 Temple Place - Suite 330, Boston,
22    MA  02111-1307, USA.
23 
24    *************************************************************************
25 
26  Translation from C++ and adaptation for use in ALSA-Driver
27  were made by Giuliano Pochini <pochini@shiny.it>
28 
29 ****************************************************************************/
30 
31 
32 static int set_vmixer_gain(struct echoaudio *chip, u16 output, u16 pipe,
33 			   int gain);
34 static int update_vmixer_level(struct echoaudio *chip);
35 
36 
37 static int init_hw(struct echoaudio *chip, u16 device_id, u16 subdevice_id)
38 {
39 	int err;
40 
41 	DE_INIT(("init_hw() - Indigo\n"));
42 	if (snd_BUG_ON((subdevice_id & 0xfff0) != INDIGO))
43 		return -ENODEV;
44 
45 	if ((err = init_dsp_comm_page(chip))) {
46 		DE_INIT(("init_hw - could not initialize DSP comm page\n"));
47 		return err;
48 	}
49 
50 	chip->device_id = device_id;
51 	chip->subdevice_id = subdevice_id;
52 	chip->bad_board = TRUE;
53 	chip->dsp_code_to_load = &card_fw[FW_INDIGO_DSP];
54 	/* Since this card has no ASIC, mark it as loaded so everything
55 	   works OK */
56 	chip->asic_loaded = TRUE;
57 	chip->input_clock_types = ECHO_CLOCK_BIT_INTERNAL;
58 
59 	if ((err = load_firmware(chip)) < 0)
60 		return err;
61 	chip->bad_board = FALSE;
62 
63 	if ((err = init_line_levels(chip)) < 0)
64 		return err;
65 
66 	DE_INIT(("init_hw done\n"));
67 	return err;
68 }
69 
70 
71 
72 static u32 detect_input_clocks(const struct echoaudio *chip)
73 {
74 	return ECHO_CLOCK_BIT_INTERNAL;
75 }
76 
77 
78 
79 /* The Indigo has no ASIC. Just do nothing */
80 static int load_asic(struct echoaudio *chip)
81 {
82 	return 0;
83 }
84 
85 
86 
87 static int set_sample_rate(struct echoaudio *chip, u32 rate)
88 {
89 	u32 control_reg;
90 
91 	switch (rate) {
92 	case 96000:
93 		control_reg = MIA_96000;
94 		break;
95 	case 88200:
96 		control_reg = MIA_88200;
97 		break;
98 	case 48000:
99 		control_reg = MIA_48000;
100 		break;
101 	case 44100:
102 		control_reg = MIA_44100;
103 		break;
104 	case 32000:
105 		control_reg = MIA_32000;
106 		break;
107 	default:
108 		DE_ACT(("set_sample_rate: %d invalid!\n", rate));
109 		return -EINVAL;
110 	}
111 
112 	/* Set the control register if it has changed */
113 	if (control_reg != le32_to_cpu(chip->comm_page->control_register)) {
114 		if (wait_handshake(chip))
115 			return -EIO;
116 
117 		chip->comm_page->sample_rate = cpu_to_le32(rate);	/* ignored by the DSP */
118 		chip->comm_page->control_register = cpu_to_le32(control_reg);
119 		chip->sample_rate = rate;
120 
121 		clear_handshake(chip);
122 		return send_vector(chip, DSP_VC_UPDATE_CLOCKS);
123 	}
124 	return 0;
125 }
126 
127 
128 
129 /* This function routes the sound from a virtual channel to a real output */
130 static int set_vmixer_gain(struct echoaudio *chip, u16 output, u16 pipe,
131 			   int gain)
132 {
133 	int index;
134 
135 	if (snd_BUG_ON(pipe >= num_pipes_out(chip) ||
136 		       output >= num_busses_out(chip)))
137 		return -EINVAL;
138 
139 	if (wait_handshake(chip))
140 		return -EIO;
141 
142 	chip->vmixer_gain[output][pipe] = gain;
143 	index = output * num_pipes_out(chip) + pipe;
144 	chip->comm_page->vmixer[index] = gain;
145 
146 	DE_ACT(("set_vmixer_gain: pipe %d, out %d = %d\n", pipe, output, gain));
147 	return 0;
148 }
149 
150 
151 
152 /* Tell the DSP to read and update virtual mixer levels in comm page. */
153 static int update_vmixer_level(struct echoaudio *chip)
154 {
155 	if (wait_handshake(chip))
156 		return -EIO;
157 	clear_handshake(chip);
158 	return send_vector(chip, DSP_VC_SET_VMIXER_GAIN);
159 }
160 
161