1 /**************************************************************************** 2 3 Copyright Echo Digital Audio Corporation (c) 1998 - 2004 4 All rights reserved 5 www.echoaudio.com 6 7 This file is part of Echo Digital Audio's generic driver library. 8 9 Echo Digital Audio's generic driver library is free software; 10 you can redistribute it and/or modify it under the terms of 11 the GNU General Public License as published by the Free Software 12 Foundation. 13 14 This program is distributed in the hope that it will be useful, 15 but WITHOUT ANY WARRANTY; without even the implied warranty of 16 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 17 GNU General Public License for more details. 18 19 You should have received a copy of the GNU General Public License 20 along with this program; if not, write to the Free Software 21 Foundation, Inc., 59 Temple Place - Suite 330, Boston, 22 MA 02111-1307, USA. 23 24 ************************************************************************* 25 26 Translation from C++ and adaptation for use in ALSA-Driver 27 were made by Giuliano Pochini <pochini@shiny.it> 28 29 ****************************************************************************/ 30 31 32 static int write_control_reg(struct echoaudio *chip, u32 value, char force); 33 static int set_input_clock(struct echoaudio *chip, u16 clock); 34 static int set_professional_spdif(struct echoaudio *chip, char prof); 35 static int set_digital_mode(struct echoaudio *chip, u8 mode); 36 static int load_asic_generic(struct echoaudio *chip, u32 cmd, short asic); 37 static int check_asic_status(struct echoaudio *chip); 38 39 40 static int init_hw(struct echoaudio *chip, u16 device_id, u16 subdevice_id) 41 { 42 int err; 43 44 DE_INIT(("init_hw() - Gina24\n")); 45 if (snd_BUG_ON((subdevice_id & 0xfff0) != GINA24)) 46 return -ENODEV; 47 48 if ((err = init_dsp_comm_page(chip))) { 49 DE_INIT(("init_hw - could not initialize DSP comm page\n")); 50 return err; 51 } 52 53 chip->device_id = device_id; 54 chip->subdevice_id = subdevice_id; 55 chip->bad_board = TRUE; 56 chip->input_clock_types = 57 ECHO_CLOCK_BIT_INTERNAL | ECHO_CLOCK_BIT_SPDIF | 58 ECHO_CLOCK_BIT_ESYNC | ECHO_CLOCK_BIT_ESYNC96 | 59 ECHO_CLOCK_BIT_ADAT; 60 61 /* Gina24 comes in both '301 and '361 flavors */ 62 if (chip->device_id == DEVICE_ID_56361) { 63 chip->dsp_code_to_load = FW_GINA24_361_DSP; 64 chip->digital_modes = 65 ECHOCAPS_HAS_DIGITAL_MODE_SPDIF_RCA | 66 ECHOCAPS_HAS_DIGITAL_MODE_SPDIF_OPTICAL | 67 ECHOCAPS_HAS_DIGITAL_MODE_ADAT; 68 } else { 69 chip->dsp_code_to_load = FW_GINA24_301_DSP; 70 chip->digital_modes = 71 ECHOCAPS_HAS_DIGITAL_MODE_SPDIF_RCA | 72 ECHOCAPS_HAS_DIGITAL_MODE_SPDIF_OPTICAL | 73 ECHOCAPS_HAS_DIGITAL_MODE_ADAT | 74 ECHOCAPS_HAS_DIGITAL_MODE_SPDIF_CDROM; 75 } 76 77 if ((err = load_firmware(chip)) < 0) 78 return err; 79 chip->bad_board = FALSE; 80 81 DE_INIT(("init_hw done\n")); 82 return err; 83 } 84 85 86 87 static int set_mixer_defaults(struct echoaudio *chip) 88 { 89 chip->digital_mode = DIGITAL_MODE_SPDIF_RCA; 90 chip->professional_spdif = FALSE; 91 chip->digital_in_automute = TRUE; 92 return init_line_levels(chip); 93 } 94 95 96 97 static u32 detect_input_clocks(const struct echoaudio *chip) 98 { 99 u32 clocks_from_dsp, clock_bits; 100 101 /* Map the DSP clock detect bits to the generic driver clock 102 detect bits */ 103 clocks_from_dsp = le32_to_cpu(chip->comm_page->status_clocks); 104 105 clock_bits = ECHO_CLOCK_BIT_INTERNAL; 106 107 if (clocks_from_dsp & GML_CLOCK_DETECT_BIT_SPDIF) 108 clock_bits |= ECHO_CLOCK_BIT_SPDIF; 109 110 if (clocks_from_dsp & GML_CLOCK_DETECT_BIT_ADAT) 111 clock_bits |= ECHO_CLOCK_BIT_ADAT; 112 113 if (clocks_from_dsp & GML_CLOCK_DETECT_BIT_ESYNC) 114 clock_bits |= ECHO_CLOCK_BIT_ESYNC | ECHO_CLOCK_BIT_ESYNC96; 115 116 return clock_bits; 117 } 118 119 120 121 /* Gina24 has an ASIC on the PCI card which must be loaded for anything 122 interesting to happen. */ 123 static int load_asic(struct echoaudio *chip) 124 { 125 u32 control_reg; 126 int err; 127 short asic; 128 129 if (chip->asic_loaded) 130 return 1; 131 132 /* Give the DSP a few milliseconds to settle down */ 133 mdelay(10); 134 135 /* Pick the correct ASIC for '301 or '361 Gina24 */ 136 if (chip->device_id == DEVICE_ID_56361) 137 asic = FW_GINA24_361_ASIC; 138 else 139 asic = FW_GINA24_301_ASIC; 140 141 err = load_asic_generic(chip, DSP_FNC_LOAD_GINA24_ASIC, asic); 142 if (err < 0) 143 return err; 144 145 chip->asic_code = asic; 146 147 /* Now give the new ASIC a little time to set up */ 148 mdelay(10); 149 /* See if it worked */ 150 err = check_asic_status(chip); 151 152 /* Set up the control register if the load succeeded - 153 48 kHz, internal clock, S/PDIF RCA mode */ 154 if (!err) { 155 control_reg = GML_CONVERTER_ENABLE | GML_48KHZ; 156 err = write_control_reg(chip, control_reg, TRUE); 157 } 158 DE_INIT(("load_asic() done\n")); 159 return err; 160 } 161 162 163 164 static int set_sample_rate(struct echoaudio *chip, u32 rate) 165 { 166 u32 control_reg, clock; 167 168 if (snd_BUG_ON(rate >= 50000 && 169 chip->digital_mode == DIGITAL_MODE_ADAT)) 170 return -EINVAL; 171 172 /* Only set the clock for internal mode. */ 173 if (chip->input_clock != ECHO_CLOCK_INTERNAL) { 174 DE_ACT(("set_sample_rate: Cannot set sample rate - " 175 "clock not set to CLK_CLOCKININTERNAL\n")); 176 /* Save the rate anyhow */ 177 chip->comm_page->sample_rate = cpu_to_le32(rate); 178 chip->sample_rate = rate; 179 return 0; 180 } 181 182 clock = 0; 183 184 control_reg = le32_to_cpu(chip->comm_page->control_register); 185 control_reg &= GML_CLOCK_CLEAR_MASK & GML_SPDIF_RATE_CLEAR_MASK; 186 187 switch (rate) { 188 case 96000: 189 clock = GML_96KHZ; 190 break; 191 case 88200: 192 clock = GML_88KHZ; 193 break; 194 case 48000: 195 clock = GML_48KHZ | GML_SPDIF_SAMPLE_RATE1; 196 break; 197 case 44100: 198 clock = GML_44KHZ; 199 /* Professional mode ? */ 200 if (control_reg & GML_SPDIF_PRO_MODE) 201 clock |= GML_SPDIF_SAMPLE_RATE0; 202 break; 203 case 32000: 204 clock = GML_32KHZ | GML_SPDIF_SAMPLE_RATE0 | 205 GML_SPDIF_SAMPLE_RATE1; 206 break; 207 case 22050: 208 clock = GML_22KHZ; 209 break; 210 case 16000: 211 clock = GML_16KHZ; 212 break; 213 case 11025: 214 clock = GML_11KHZ; 215 break; 216 case 8000: 217 clock = GML_8KHZ; 218 break; 219 default: 220 DE_ACT(("set_sample_rate: %d invalid!\n", rate)); 221 return -EINVAL; 222 } 223 224 control_reg |= clock; 225 226 chip->comm_page->sample_rate = cpu_to_le32(rate); /* ignored by the DSP */ 227 chip->sample_rate = rate; 228 DE_ACT(("set_sample_rate: %d clock %d\n", rate, clock)); 229 230 return write_control_reg(chip, control_reg, FALSE); 231 } 232 233 234 235 static int set_input_clock(struct echoaudio *chip, u16 clock) 236 { 237 u32 control_reg, clocks_from_dsp; 238 239 DE_ACT(("set_input_clock:\n")); 240 241 /* Mask off the clock select bits */ 242 control_reg = le32_to_cpu(chip->comm_page->control_register) & 243 GML_CLOCK_CLEAR_MASK; 244 clocks_from_dsp = le32_to_cpu(chip->comm_page->status_clocks); 245 246 switch (clock) { 247 case ECHO_CLOCK_INTERNAL: 248 DE_ACT(("Set Gina24 clock to INTERNAL\n")); 249 chip->input_clock = ECHO_CLOCK_INTERNAL; 250 return set_sample_rate(chip, chip->sample_rate); 251 case ECHO_CLOCK_SPDIF: 252 if (chip->digital_mode == DIGITAL_MODE_ADAT) 253 return -EAGAIN; 254 DE_ACT(("Set Gina24 clock to SPDIF\n")); 255 control_reg |= GML_SPDIF_CLOCK; 256 if (clocks_from_dsp & GML_CLOCK_DETECT_BIT_SPDIF96) 257 control_reg |= GML_DOUBLE_SPEED_MODE; 258 else 259 control_reg &= ~GML_DOUBLE_SPEED_MODE; 260 break; 261 case ECHO_CLOCK_ADAT: 262 if (chip->digital_mode != DIGITAL_MODE_ADAT) 263 return -EAGAIN; 264 DE_ACT(("Set Gina24 clock to ADAT\n")); 265 control_reg |= GML_ADAT_CLOCK; 266 control_reg &= ~GML_DOUBLE_SPEED_MODE; 267 break; 268 case ECHO_CLOCK_ESYNC: 269 DE_ACT(("Set Gina24 clock to ESYNC\n")); 270 control_reg |= GML_ESYNC_CLOCK; 271 control_reg &= ~GML_DOUBLE_SPEED_MODE; 272 break; 273 case ECHO_CLOCK_ESYNC96: 274 DE_ACT(("Set Gina24 clock to ESYNC96\n")); 275 control_reg |= GML_ESYNC_CLOCK | GML_DOUBLE_SPEED_MODE; 276 break; 277 default: 278 DE_ACT(("Input clock 0x%x not supported for Gina24\n", clock)); 279 return -EINVAL; 280 } 281 282 chip->input_clock = clock; 283 return write_control_reg(chip, control_reg, TRUE); 284 } 285 286 287 288 static int dsp_set_digital_mode(struct echoaudio *chip, u8 mode) 289 { 290 u32 control_reg; 291 int err, incompatible_clock; 292 293 /* Set clock to "internal" if it's not compatible with the new mode */ 294 incompatible_clock = FALSE; 295 switch (mode) { 296 case DIGITAL_MODE_SPDIF_OPTICAL: 297 case DIGITAL_MODE_SPDIF_CDROM: 298 case DIGITAL_MODE_SPDIF_RCA: 299 if (chip->input_clock == ECHO_CLOCK_ADAT) 300 incompatible_clock = TRUE; 301 break; 302 case DIGITAL_MODE_ADAT: 303 if (chip->input_clock == ECHO_CLOCK_SPDIF) 304 incompatible_clock = TRUE; 305 break; 306 default: 307 DE_ACT(("Digital mode not supported: %d\n", mode)); 308 return -EINVAL; 309 } 310 311 spin_lock_irq(&chip->lock); 312 313 if (incompatible_clock) { /* Switch to 48KHz, internal */ 314 chip->sample_rate = 48000; 315 set_input_clock(chip, ECHO_CLOCK_INTERNAL); 316 } 317 318 /* Clear the current digital mode */ 319 control_reg = le32_to_cpu(chip->comm_page->control_register); 320 control_reg &= GML_DIGITAL_MODE_CLEAR_MASK; 321 322 /* Tweak the control reg */ 323 switch (mode) { 324 case DIGITAL_MODE_SPDIF_OPTICAL: 325 control_reg |= GML_SPDIF_OPTICAL_MODE; 326 break; 327 case DIGITAL_MODE_SPDIF_CDROM: 328 /* '361 Gina24 cards do not have the S/PDIF CD-ROM mode */ 329 if (chip->device_id == DEVICE_ID_56301) 330 control_reg |= GML_SPDIF_CDROM_MODE; 331 break; 332 case DIGITAL_MODE_SPDIF_RCA: 333 /* GML_SPDIF_OPTICAL_MODE bit cleared */ 334 break; 335 case DIGITAL_MODE_ADAT: 336 control_reg |= GML_ADAT_MODE; 337 control_reg &= ~GML_DOUBLE_SPEED_MODE; 338 break; 339 } 340 341 err = write_control_reg(chip, control_reg, TRUE); 342 spin_unlock_irq(&chip->lock); 343 if (err < 0) 344 return err; 345 chip->digital_mode = mode; 346 347 DE_ACT(("set_digital_mode to %d\n", chip->digital_mode)); 348 return incompatible_clock; 349 } 350