1 /****************************************************************************
2 
3    Copyright Echo Digital Audio Corporation (c) 1998 - 2004
4    All rights reserved
5    www.echoaudio.com
6 
7    This file is part of Echo Digital Audio's generic driver library.
8 
9    Echo Digital Audio's generic driver library is free software;
10    you can redistribute it and/or modify it under the terms of
11    the GNU General Public License as published by the Free Software
12    Foundation.
13 
14    This program is distributed in the hope that it will be useful,
15    but WITHOUT ANY WARRANTY; without even the implied warranty of
16    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
17    GNU General Public License for more details.
18 
19    You should have received a copy of the GNU General Public License
20    along with this program; if not, write to the Free Software
21    Foundation, Inc., 59 Temple Place - Suite 330, Boston,
22    MA  02111-1307, USA.
23 
24    *************************************************************************
25 
26  Translation from C++ and adaptation for use in ALSA-Driver
27  were made by Giuliano Pochini <pochini@shiny.it>
28 
29 ****************************************************************************/
30 
31 
32 /* These functions are common for Gina24, Layla24 and Mona cards */
33 
34 
35 /* ASIC status check - some cards have one or two ASICs that need to be
36 loaded.  Once that load is complete, this function is called to see if
37 the load was successful.
38 If this load fails, it does not necessarily mean that the hardware is
39 defective - the external box may be disconnected or turned off. */
40 static int check_asic_status(struct echoaudio *chip)
41 {
42 	u32 asic_status;
43 
44 	send_vector(chip, DSP_VC_TEST_ASIC);
45 
46 	/* The DSP will return a value to indicate whether or not the
47 	   ASIC is currently loaded */
48 	if (read_dsp(chip, &asic_status) < 0) {
49 		dev_err(chip->card->dev,
50 			"check_asic_status: failed on read_dsp\n");
51 		chip->asic_loaded = false;
52 		return -EIO;
53 	}
54 
55 	chip->asic_loaded = (asic_status == ASIC_ALREADY_LOADED);
56 	return chip->asic_loaded ? 0 : -EIO;
57 }
58 
59 
60 
61 /* Most configuration of Gina24, Layla24, or Mona is accomplished by writing
62 the control register.  write_control_reg sends the new control register
63 value to the DSP. */
64 static int write_control_reg(struct echoaudio *chip, u32 value, char force)
65 {
66 	__le32 reg_value;
67 
68 	/* Handle the digital input auto-mute */
69 	if (chip->digital_in_automute)
70 		value |= GML_DIGITAL_IN_AUTO_MUTE;
71 	else
72 		value &= ~GML_DIGITAL_IN_AUTO_MUTE;
73 
74 	dev_dbg(chip->card->dev, "write_control_reg: 0x%x\n", value);
75 
76 	/* Write the control register */
77 	reg_value = cpu_to_le32(value);
78 	if (reg_value != chip->comm_page->control_register || force) {
79 		if (wait_handshake(chip))
80 			return -EIO;
81 		chip->comm_page->control_register = reg_value;
82 		clear_handshake(chip);
83 		return send_vector(chip, DSP_VC_WRITE_CONTROL_REG);
84 	}
85 	return 0;
86 }
87 
88 
89 
90 /* Gina24, Layla24, and Mona support digital input auto-mute.  If the digital
91 input auto-mute is enabled, the DSP will only enable the digital inputs if
92 the card is syncing to a valid clock on the ADAT or S/PDIF inputs.
93 If the auto-mute is disabled, the digital inputs are enabled regardless of
94 what the input clock is set or what is connected. */
95 static int set_input_auto_mute(struct echoaudio *chip, int automute)
96 {
97 	dev_dbg(chip->card->dev, "set_input_auto_mute %d\n", automute);
98 
99 	chip->digital_in_automute = automute;
100 
101 	/* Re-set the input clock to the current value - indirectly causes
102 	the auto-mute flag to be sent to the DSP */
103 	return set_input_clock(chip, chip->input_clock);
104 }
105 
106 
107 
108 /* S/PDIF coax / S/PDIF optical / ADAT - switch */
109 static int set_digital_mode(struct echoaudio *chip, u8 mode)
110 {
111 	u8 previous_mode;
112 	int err, i, o;
113 
114 	if (chip->bad_board)
115 		return -EIO;
116 
117 	/* All audio channels must be closed before changing the digital mode */
118 	if (snd_BUG_ON(chip->pipe_alloc_mask))
119 		return -EAGAIN;
120 
121 	if (snd_BUG_ON(!(chip->digital_modes & (1 << mode))))
122 		return -EINVAL;
123 
124 	previous_mode = chip->digital_mode;
125 	err = dsp_set_digital_mode(chip, mode);
126 
127 	/* If we successfully changed the digital mode from or to ADAT,
128 	   then make sure all output, input and monitor levels are
129 	   updated by the DSP comm object. */
130 	if (err >= 0 && previous_mode != mode &&
131 	    (previous_mode == DIGITAL_MODE_ADAT || mode == DIGITAL_MODE_ADAT)) {
132 		spin_lock_irq(&chip->lock);
133 		for (o = 0; o < num_busses_out(chip); o++)
134 			for (i = 0; i < num_busses_in(chip); i++)
135 				set_monitor_gain(chip, o, i,
136 						 chip->monitor_gain[o][i]);
137 
138 #ifdef ECHOCARD_HAS_INPUT_GAIN
139 		for (i = 0; i < num_busses_in(chip); i++)
140 			set_input_gain(chip, i, chip->input_gain[i]);
141 		update_input_line_level(chip);
142 #endif
143 
144 		for (o = 0; o < num_busses_out(chip); o++)
145 			set_output_gain(chip, o, chip->output_gain[o]);
146 		update_output_line_level(chip);
147 		spin_unlock_irq(&chip->lock);
148 	}
149 
150 	return err;
151 }
152 
153 
154 
155 /* Set the S/PDIF output format */
156 static int set_professional_spdif(struct echoaudio *chip, char prof)
157 {
158 	u32 control_reg;
159 	int err;
160 
161 	/* Clear the current S/PDIF flags */
162 	control_reg = le32_to_cpu(chip->comm_page->control_register);
163 	control_reg &= GML_SPDIF_FORMAT_CLEAR_MASK;
164 
165 	/* Set the new S/PDIF flags depending on the mode */
166 	control_reg |= GML_SPDIF_TWO_CHANNEL | GML_SPDIF_24_BIT |
167 		GML_SPDIF_COPY_PERMIT;
168 	if (prof) {
169 		/* Professional mode */
170 		control_reg |= GML_SPDIF_PRO_MODE;
171 
172 		switch (chip->sample_rate) {
173 		case 32000:
174 			control_reg |= GML_SPDIF_SAMPLE_RATE0 |
175 				GML_SPDIF_SAMPLE_RATE1;
176 			break;
177 		case 44100:
178 			control_reg |= GML_SPDIF_SAMPLE_RATE0;
179 			break;
180 		case 48000:
181 			control_reg |= GML_SPDIF_SAMPLE_RATE1;
182 			break;
183 		}
184 	} else {
185 		/* Consumer mode */
186 		switch (chip->sample_rate) {
187 		case 32000:
188 			control_reg |= GML_SPDIF_SAMPLE_RATE0 |
189 				GML_SPDIF_SAMPLE_RATE1;
190 			break;
191 		case 48000:
192 			control_reg |= GML_SPDIF_SAMPLE_RATE1;
193 			break;
194 		}
195 	}
196 
197 	if ((err = write_control_reg(chip, control_reg, false)))
198 		return err;
199 	chip->professional_spdif = prof;
200 	dev_dbg(chip->card->dev, "set_professional_spdif to %s\n",
201 		prof ? "Professional" : "Consumer");
202 	return 0;
203 }
204