1 /**************************************************************************** 2 3 Copyright Echo Digital Audio Corporation (c) 1998 - 2004 4 All rights reserved 5 www.echoaudio.com 6 7 This file is part of Echo Digital Audio's generic driver library. 8 9 Echo Digital Audio's generic driver library is free software; 10 you can redistribute it and/or modify it under the terms of 11 the GNU General Public License as published by the Free Software 12 Foundation. 13 14 This program is distributed in the hope that it will be useful, 15 but WITHOUT ANY WARRANTY; without even the implied warranty of 16 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 17 GNU General Public License for more details. 18 19 You should have received a copy of the GNU General Public License 20 along with this program; if not, write to the Free Software 21 Foundation, Inc., 59 Temple Place - Suite 330, Boston, 22 MA 02111-1307, USA. 23 24 ************************************************************************* 25 26 Translation from C++ and adaptation for use in ALSA-Driver 27 were made by Giuliano Pochini <pochini@shiny.it> 28 29 ****************************************************************************/ 30 31 #ifndef _ECHO_DSP_ 32 #define _ECHO_DSP_ 33 34 35 /**** Echogals: Darla20, Gina20, Layla20, and Darla24 ****/ 36 #if defined(ECHOGALS_FAMILY) 37 38 #define NUM_ASIC_TESTS 5 39 #define READ_DSP_TIMEOUT 1000000L /* one second */ 40 41 /**** Echo24: Gina24, Layla24, Mona, Mia, Mia-midi ****/ 42 #elif defined(ECHO24_FAMILY) 43 44 #define DSP_56361 /* Some Echo24 cards use the 56361 DSP */ 45 #define READ_DSP_TIMEOUT 100000L /* .1 second */ 46 47 /**** 3G: Gina3G, Layla3G ****/ 48 #elif defined(ECHO3G_FAMILY) 49 50 #define DSP_56361 51 #define READ_DSP_TIMEOUT 100000L /* .1 second */ 52 #define MIN_MTC_1X_RATE 32000 53 54 /**** Indigo: Indigo, Indigo IO, Indigo DJ ****/ 55 #elif defined(INDIGO_FAMILY) 56 57 #define DSP_56361 58 #define READ_DSP_TIMEOUT 100000L /* .1 second */ 59 60 #else 61 62 #error No family is defined 63 64 #endif 65 66 67 68 /* 69 * 70 * Max inputs and outputs 71 * 72 */ 73 74 #define DSP_MAXAUDIOINPUTS 16 /* Max audio input channels */ 75 #define DSP_MAXAUDIOOUTPUTS 16 /* Max audio output channels */ 76 #define DSP_MAXPIPES 32 /* Max total pipes (input + output) */ 77 78 79 /* 80 * 81 * These are the offsets for the memory-mapped DSP registers; the DSP base 82 * address is treated as the start of a u32 array. 83 */ 84 85 #define CHI32_CONTROL_REG 4 86 #define CHI32_STATUS_REG 5 87 #define CHI32_VECTOR_REG 6 88 #define CHI32_DATA_REG 7 89 90 91 /* 92 * 93 * Interesting bits within the DSP registers 94 * 95 */ 96 97 #define CHI32_VECTOR_BUSY 0x00000001 98 #define CHI32_STATUS_REG_HF3 0x00000008 99 #define CHI32_STATUS_REG_HF4 0x00000010 100 #define CHI32_STATUS_REG_HF5 0x00000020 101 #define CHI32_STATUS_HOST_READ_FULL 0x00000004 102 #define CHI32_STATUS_HOST_WRITE_EMPTY 0x00000002 103 #define CHI32_STATUS_IRQ 0x00000040 104 105 106 /* 107 * 108 * DSP commands sent via slave mode; these are sent to the DSP by write_dsp() 109 * 110 */ 111 112 #define DSP_FNC_SET_COMMPAGE_ADDR 0x02 113 #define DSP_FNC_LOAD_LAYLA_ASIC 0xa0 114 #define DSP_FNC_LOAD_GINA24_ASIC 0xa0 115 #define DSP_FNC_LOAD_MONA_PCI_CARD_ASIC 0xa0 116 #define DSP_FNC_LOAD_LAYLA24_PCI_CARD_ASIC 0xa0 117 #define DSP_FNC_LOAD_MONA_EXTERNAL_ASIC 0xa1 118 #define DSP_FNC_LOAD_LAYLA24_EXTERNAL_ASIC 0xa1 119 #define DSP_FNC_LOAD_3G_ASIC 0xa0 120 121 122 /* 123 * 124 * Defines to handle the MIDI input state engine; these are used to properly 125 * extract MIDI time code bytes and their timestamps from the MIDI input stream. 126 * 127 */ 128 129 #define MIDI_IN_STATE_NORMAL 0 130 #define MIDI_IN_STATE_TS_HIGH 1 131 #define MIDI_IN_STATE_TS_LOW 2 132 #define MIDI_IN_STATE_F1_DATA 3 133 #define MIDI_IN_SKIP_DATA (-1) 134 135 136 /*---------------------------------------------------------------------------- 137 138 Setting the sample rates on Layla24 is somewhat schizophrenic. 139 140 For standard rates, it works exactly like Mona and Gina24. That is, for 141 8, 11.025, 16, 22.05, 32, 44.1, 48, 88.2, and 96 kHz, you just set the 142 appropriate bits in the control register and write the control register. 143 144 In order to support MIDI time code sync (and possibly SMPTE LTC sync in 145 the future), Layla24 also has "continuous sample rate mode". In this mode, 146 Layla24 can generate any sample rate between 25 and 50 kHz inclusive, or 147 50 to 100 kHz inclusive for double speed mode. 148 149 To use continuous mode: 150 151 -Set the clock select bits in the control register to 0xe (see the #define 152 below) 153 154 -Set double-speed mode if you want to use sample rates above 50 kHz 155 156 -Write the control register as you would normally 157 158 -Now, you need to set the frequency register. First, you need to determine the 159 value for the frequency register. This is given by the following formula: 160 161 frequency_reg = (LAYLA24_MAGIC_NUMBER / sample_rate) - 2 162 163 Note the #define below for the magic number 164 165 -Wait for the DSP handshake 166 -Write the frequency_reg value to the .SampleRate field of the comm page 167 -Send the vector command SET_LAYLA24_FREQUENCY_REG (see vmonkey.h) 168 169 Once you have set the control register up for continuous mode, you can just 170 write the frequency register to change the sample rate. This could be 171 used for MIDI time code sync. For MTC sync, the control register is set for 172 continuous mode. The driver then just keeps writing the 173 SET_LAYLA24_FREQUENCY_REG command. 174 175 -----------------------------------------------------------------------------*/ 176 177 #define LAYLA24_MAGIC_NUMBER 677376000 178 #define LAYLA24_CONTINUOUS_CLOCK 0x000e 179 180 181 /* 182 * 183 * DSP vector commands 184 * 185 */ 186 187 #define DSP_VC_RESET 0x80ff 188 189 #ifndef DSP_56361 190 191 #define DSP_VC_ACK_INT 0x8073 192 #define DSP_VC_SET_VMIXER_GAIN 0x0000 /* Not used, only for compile */ 193 #define DSP_VC_START_TRANSFER 0x0075 /* Handshke rqd. */ 194 #define DSP_VC_METERS_ON 0x0079 195 #define DSP_VC_METERS_OFF 0x007b 196 #define DSP_VC_UPDATE_OUTVOL 0x007d /* Handshke rqd. */ 197 #define DSP_VC_UPDATE_INGAIN 0x007f /* Handshke rqd. */ 198 #define DSP_VC_ADD_AUDIO_BUFFER 0x0081 /* Handshke rqd. */ 199 #define DSP_VC_TEST_ASIC 0x00eb 200 #define DSP_VC_UPDATE_CLOCKS 0x00ef /* Handshke rqd. */ 201 #define DSP_VC_SET_LAYLA_SAMPLE_RATE 0x00f1 /* Handshke rqd. */ 202 #define DSP_VC_SET_GD_AUDIO_STATE 0x00f1 /* Handshke rqd. */ 203 #define DSP_VC_WRITE_CONTROL_REG 0x00f1 /* Handshke rqd. */ 204 #define DSP_VC_MIDI_WRITE 0x00f5 /* Handshke rqd. */ 205 #define DSP_VC_STOP_TRANSFER 0x00f7 /* Handshke rqd. */ 206 #define DSP_VC_UPDATE_FLAGS 0x00fd /* Handshke rqd. */ 207 #define DSP_VC_GO_COMATOSE 0x00f9 208 209 #else /* !DSP_56361 */ 210 211 /* Vector commands for families that use either the 56301 or 56361 */ 212 #define DSP_VC_ACK_INT 0x80F5 213 #define DSP_VC_SET_VMIXER_GAIN 0x00DB /* Handshke rqd. */ 214 #define DSP_VC_START_TRANSFER 0x00DD /* Handshke rqd. */ 215 #define DSP_VC_METERS_ON 0x00EF 216 #define DSP_VC_METERS_OFF 0x00F1 217 #define DSP_VC_UPDATE_OUTVOL 0x00E3 /* Handshke rqd. */ 218 #define DSP_VC_UPDATE_INGAIN 0x00E5 /* Handshke rqd. */ 219 #define DSP_VC_ADD_AUDIO_BUFFER 0x00E1 /* Handshke rqd. */ 220 #define DSP_VC_TEST_ASIC 0x00ED 221 #define DSP_VC_UPDATE_CLOCKS 0x00E9 /* Handshke rqd. */ 222 #define DSP_VC_SET_LAYLA24_FREQUENCY_REG 0x00E9 /* Handshke rqd. */ 223 #define DSP_VC_SET_LAYLA_SAMPLE_RATE 0x00EB /* Handshke rqd. */ 224 #define DSP_VC_SET_GD_AUDIO_STATE 0x00EB /* Handshke rqd. */ 225 #define DSP_VC_WRITE_CONTROL_REG 0x00EB /* Handshke rqd. */ 226 #define DSP_VC_MIDI_WRITE 0x00E7 /* Handshke rqd. */ 227 #define DSP_VC_STOP_TRANSFER 0x00DF /* Handshke rqd. */ 228 #define DSP_VC_UPDATE_FLAGS 0x00FB /* Handshke rqd. */ 229 #define DSP_VC_GO_COMATOSE 0x00d9 230 231 #endif /* !DSP_56361 */ 232 233 234 /* 235 * 236 * Timeouts 237 * 238 */ 239 240 #define HANDSHAKE_TIMEOUT 20000 /* send_vector command timeout (20ms) */ 241 #define VECTOR_BUSY_TIMEOUT 100000 /* 100ms */ 242 #define MIDI_OUT_DELAY_USEC 2000 /* How long to wait after MIDI fills up */ 243 244 245 /* 246 * 247 * Flags for .Flags field in the comm page 248 * 249 */ 250 251 #define DSP_FLAG_MIDI_INPUT 0x0001 /* Enable MIDI input */ 252 #define DSP_FLAG_SPDIF_NONAUDIO 0x0002 /* Sets the "non-audio" bit 253 * in the S/PDIF out status 254 * bits. Clear this flag for 255 * audio data; 256 * set it for AC3 or WMA or 257 * some such */ 258 #define DSP_FLAG_PROFESSIONAL_SPDIF 0x0008 /* 1 Professional, 0 Consumer */ 259 260 261 /* 262 * 263 * Clock detect bits reported by the DSP for Gina20, Layla20, Darla24, and Mia 264 * 265 */ 266 267 #define GLDM_CLOCK_DETECT_BIT_WORD 0x0002 268 #define GLDM_CLOCK_DETECT_BIT_SUPER 0x0004 269 #define GLDM_CLOCK_DETECT_BIT_SPDIF 0x0008 270 #define GLDM_CLOCK_DETECT_BIT_ESYNC 0x0010 271 272 273 /* 274 * 275 * Clock detect bits reported by the DSP for Gina24, Mona, and Layla24 276 * 277 */ 278 279 #define GML_CLOCK_DETECT_BIT_WORD96 0x0002 280 #define GML_CLOCK_DETECT_BIT_WORD48 0x0004 281 #define GML_CLOCK_DETECT_BIT_SPDIF48 0x0008 282 #define GML_CLOCK_DETECT_BIT_SPDIF96 0x0010 283 #define GML_CLOCK_DETECT_BIT_WORD (GML_CLOCK_DETECT_BIT_WORD96 | GML_CLOCK_DETECT_BIT_WORD48) 284 #define GML_CLOCK_DETECT_BIT_SPDIF (GML_CLOCK_DETECT_BIT_SPDIF48 | GML_CLOCK_DETECT_BIT_SPDIF96) 285 #define GML_CLOCK_DETECT_BIT_ESYNC 0x0020 286 #define GML_CLOCK_DETECT_BIT_ADAT 0x0040 287 288 289 /* 290 * 291 * Layla clock numbers to send to DSP 292 * 293 */ 294 295 #define LAYLA20_CLOCK_INTERNAL 0 296 #define LAYLA20_CLOCK_SPDIF 1 297 #define LAYLA20_CLOCK_WORD 2 298 #define LAYLA20_CLOCK_SUPER 3 299 300 301 /* 302 * 303 * Gina/Darla clock states 304 * 305 */ 306 307 #define GD_CLOCK_NOCHANGE 0 308 #define GD_CLOCK_44 1 309 #define GD_CLOCK_48 2 310 #define GD_CLOCK_SPDIFIN 3 311 #define GD_CLOCK_UNDEF 0xff 312 313 314 /* 315 * 316 * Gina/Darla S/PDIF status bits 317 * 318 */ 319 320 #define GD_SPDIF_STATUS_NOCHANGE 0 321 #define GD_SPDIF_STATUS_44 1 322 #define GD_SPDIF_STATUS_48 2 323 #define GD_SPDIF_STATUS_UNDEF 0xff 324 325 326 /* 327 * 328 * Layla20 output clocks 329 * 330 */ 331 332 #define LAYLA20_OUTPUT_CLOCK_SUPER 0 333 #define LAYLA20_OUTPUT_CLOCK_WORD 1 334 335 336 /**************************************************************************** 337 338 Magic constants for the Darla24 hardware 339 340 ****************************************************************************/ 341 342 #define GD24_96000 0x0 343 #define GD24_48000 0x1 344 #define GD24_44100 0x2 345 #define GD24_32000 0x3 346 #define GD24_22050 0x4 347 #define GD24_16000 0x5 348 #define GD24_11025 0x6 349 #define GD24_8000 0x7 350 #define GD24_88200 0x8 351 #define GD24_EXT_SYNC 0x9 352 353 354 /* 355 * 356 * Return values from the DSP when ASIC is loaded 357 * 358 */ 359 360 #define ASIC_ALREADY_LOADED 0x1 361 #define ASIC_NOT_LOADED 0x0 362 363 364 /* 365 * 366 * DSP Audio formats 367 * 368 * These are the audio formats that the DSP can transfer 369 * via input and output pipes. LE means little-endian, 370 * BE means big-endian. 371 * 372 * DSP_AUDIOFORM_MS_8 373 * 374 * 8-bit mono unsigned samples. For playback, 375 * mono data is duplicated out the left and right channels 376 * of the output bus. The "MS" part of the name 377 * means mono->stereo. 378 * 379 * DSP_AUDIOFORM_MS_16LE 380 * 381 * 16-bit signed little-endian mono samples. Playback works 382 * like the previous code. 383 * 384 * DSP_AUDIOFORM_MS_24LE 385 * 386 * 24-bit signed little-endian mono samples. Data is packed 387 * three bytes per sample; if you had two samples 0x112233 and 0x445566 388 * they would be stored in memory like this: 33 22 11 66 55 44. 389 * 390 * DSP_AUDIOFORM_MS_32LE 391 * 392 * 24-bit signed little-endian mono samples in a 32-bit 393 * container. In other words, each sample is a 32-bit signed 394 * integer, where the actual audio data is left-justified 395 * in the 32 bits and only the 24 most significant bits are valid. 396 * 397 * DSP_AUDIOFORM_SS_8 398 * DSP_AUDIOFORM_SS_16LE 399 * DSP_AUDIOFORM_SS_24LE 400 * DSP_AUDIOFORM_SS_32LE 401 * 402 * Like the previous ones, except now with stereo interleaved 403 * data. "SS" means stereo->stereo. 404 * 405 * DSP_AUDIOFORM_MM_32LE 406 * 407 * Similar to DSP_AUDIOFORM_MS_32LE, except that the mono 408 * data is not duplicated out both the left and right outputs. 409 * This mode is used by the ASIO driver. Here, "MM" means 410 * mono->mono. 411 * 412 * DSP_AUDIOFORM_MM_32BE 413 * 414 * Just like DSP_AUDIOFORM_MM_32LE, but now the data is 415 * in big-endian format. 416 * 417 */ 418 419 #define DSP_AUDIOFORM_MS_8 0 /* 8 bit mono */ 420 #define DSP_AUDIOFORM_MS_16LE 1 /* 16 bit mono */ 421 #define DSP_AUDIOFORM_MS_24LE 2 /* 24 bit mono */ 422 #define DSP_AUDIOFORM_MS_32LE 3 /* 32 bit mono */ 423 #define DSP_AUDIOFORM_SS_8 4 /* 8 bit stereo */ 424 #define DSP_AUDIOFORM_SS_16LE 5 /* 16 bit stereo */ 425 #define DSP_AUDIOFORM_SS_24LE 6 /* 24 bit stereo */ 426 #define DSP_AUDIOFORM_SS_32LE 7 /* 32 bit stereo */ 427 #define DSP_AUDIOFORM_MM_32LE 8 /* 32 bit mono->mono little-endian */ 428 #define DSP_AUDIOFORM_MM_32BE 9 /* 32 bit mono->mono big-endian */ 429 #define DSP_AUDIOFORM_SS_32BE 10 /* 32 bit stereo big endian */ 430 #define DSP_AUDIOFORM_INVALID 0xFF /* Invalid audio format */ 431 432 433 /* 434 * 435 * Super-interleave is defined as interleaving by 4 or more. Darla20 and Gina20 436 * do not support super interleave. 437 * 438 * 16 bit, 24 bit, and 32 bit little endian samples are supported for super 439 * interleave. The interleave factor must be even. 16 - way interleave is the 440 * current maximum, so you can interleave by 4, 6, 8, 10, 12, 14, and 16. 441 * 442 * The actual format code is derived by taking the define below and or-ing with 443 * the interleave factor. So, 32 bit interleave by 6 is 0x86 and 444 * 16 bit interleave by 16 is (0x40 | 0x10) = 0x50. 445 * 446 */ 447 448 #define DSP_AUDIOFORM_SUPER_INTERLEAVE_16LE 0x40 449 #define DSP_AUDIOFORM_SUPER_INTERLEAVE_24LE 0xc0 450 #define DSP_AUDIOFORM_SUPER_INTERLEAVE_32LE 0x80 451 452 453 /* 454 * 455 * Gina24, Mona, and Layla24 control register defines 456 * 457 */ 458 459 #define GML_CONVERTER_ENABLE 0x0010 460 #define GML_SPDIF_PRO_MODE 0x0020 /* Professional S/PDIF == 1, 461 consumer == 0 */ 462 #define GML_SPDIF_SAMPLE_RATE0 0x0040 463 #define GML_SPDIF_SAMPLE_RATE1 0x0080 464 #define GML_SPDIF_TWO_CHANNEL 0x0100 /* 1 == two channels, 465 0 == one channel */ 466 #define GML_SPDIF_NOT_AUDIO 0x0200 467 #define GML_SPDIF_COPY_PERMIT 0x0400 468 #define GML_SPDIF_24_BIT 0x0800 /* 1 == 24 bit, 0 == 20 bit */ 469 #define GML_ADAT_MODE 0x1000 /* 1 == ADAT mode, 0 == S/PDIF mode */ 470 #define GML_SPDIF_OPTICAL_MODE 0x2000 /* 1 == optical mode, 0 == RCA mode */ 471 #define GML_SPDIF_CDROM_MODE 0x3000 /* 1 == CDROM mode, 472 * 0 == RCA or optical mode */ 473 #define GML_DOUBLE_SPEED_MODE 0x4000 /* 1 == double speed, 474 0 == single speed */ 475 476 #define GML_DIGITAL_IN_AUTO_MUTE 0x800000 477 478 #define GML_96KHZ (0x0 | GML_DOUBLE_SPEED_MODE) 479 #define GML_88KHZ (0x1 | GML_DOUBLE_SPEED_MODE) 480 #define GML_48KHZ 0x2 481 #define GML_44KHZ 0x3 482 #define GML_32KHZ 0x4 483 #define GML_22KHZ 0x5 484 #define GML_16KHZ 0x6 485 #define GML_11KHZ 0x7 486 #define GML_8KHZ 0x8 487 #define GML_SPDIF_CLOCK 0x9 488 #define GML_ADAT_CLOCK 0xA 489 #define GML_WORD_CLOCK 0xB 490 #define GML_ESYNC_CLOCK 0xC 491 #define GML_ESYNCx2_CLOCK 0xD 492 493 #define GML_CLOCK_CLEAR_MASK 0xffffbff0 494 #define GML_SPDIF_RATE_CLEAR_MASK (~(GML_SPDIF_SAMPLE_RATE0|GML_SPDIF_SAMPLE_RATE1)) 495 #define GML_DIGITAL_MODE_CLEAR_MASK 0xffffcfff 496 #define GML_SPDIF_FORMAT_CLEAR_MASK 0xfffff01f 497 498 499 /* 500 * 501 * Mia sample rate and clock setting constants 502 * 503 */ 504 505 #define MIA_32000 0x0040 506 #define MIA_44100 0x0042 507 #define MIA_48000 0x0041 508 #define MIA_88200 0x0142 509 #define MIA_96000 0x0141 510 511 #define MIA_SPDIF 0x00000044 512 #define MIA_SPDIF96 0x00000144 513 514 #define MIA_MIDI_REV 1 /* Must be Mia rev 1 for MIDI support */ 515 516 517 /* 518 * 519 * 3G register bits 520 * 521 */ 522 523 #define E3G_CONVERTER_ENABLE 0x0010 524 #define E3G_SPDIF_PRO_MODE 0x0020 /* Professional S/PDIF == 1, 525 consumer == 0 */ 526 #define E3G_SPDIF_SAMPLE_RATE0 0x0040 527 #define E3G_SPDIF_SAMPLE_RATE1 0x0080 528 #define E3G_SPDIF_TWO_CHANNEL 0x0100 /* 1 == two channels, 529 0 == one channel */ 530 #define E3G_SPDIF_NOT_AUDIO 0x0200 531 #define E3G_SPDIF_COPY_PERMIT 0x0400 532 #define E3G_SPDIF_24_BIT 0x0800 /* 1 == 24 bit, 0 == 20 bit */ 533 #define E3G_DOUBLE_SPEED_MODE 0x4000 /* 1 == double speed, 534 0 == single speed */ 535 #define E3G_PHANTOM_POWER 0x8000 /* 1 == phantom power on, 536 0 == phantom power off */ 537 538 #define E3G_96KHZ (0x0 | E3G_DOUBLE_SPEED_MODE) 539 #define E3G_88KHZ (0x1 | E3G_DOUBLE_SPEED_MODE) 540 #define E3G_48KHZ 0x2 541 #define E3G_44KHZ 0x3 542 #define E3G_32KHZ 0x4 543 #define E3G_22KHZ 0x5 544 #define E3G_16KHZ 0x6 545 #define E3G_11KHZ 0x7 546 #define E3G_8KHZ 0x8 547 #define E3G_SPDIF_CLOCK 0x9 548 #define E3G_ADAT_CLOCK 0xA 549 #define E3G_WORD_CLOCK 0xB 550 #define E3G_CONTINUOUS_CLOCK 0xE 551 552 #define E3G_ADAT_MODE 0x1000 553 #define E3G_SPDIF_OPTICAL_MODE 0x2000 554 555 #define E3G_CLOCK_CLEAR_MASK 0xbfffbff0 556 #define E3G_DIGITAL_MODE_CLEAR_MASK 0xffffcfff 557 #define E3G_SPDIF_FORMAT_CLEAR_MASK 0xfffff01f 558 559 /* Clock detect bits reported by the DSP */ 560 #define E3G_CLOCK_DETECT_BIT_WORD96 0x0001 561 #define E3G_CLOCK_DETECT_BIT_WORD48 0x0002 562 #define E3G_CLOCK_DETECT_BIT_SPDIF48 0x0004 563 #define E3G_CLOCK_DETECT_BIT_ADAT 0x0004 564 #define E3G_CLOCK_DETECT_BIT_SPDIF96 0x0008 565 #define E3G_CLOCK_DETECT_BIT_WORD (E3G_CLOCK_DETECT_BIT_WORD96|E3G_CLOCK_DETECT_BIT_WORD48) 566 #define E3G_CLOCK_DETECT_BIT_SPDIF (E3G_CLOCK_DETECT_BIT_SPDIF48|E3G_CLOCK_DETECT_BIT_SPDIF96) 567 568 /* Frequency control register */ 569 #define E3G_MAGIC_NUMBER 677376000 570 #define E3G_FREQ_REG_DEFAULT (E3G_MAGIC_NUMBER / 48000 - 2) 571 #define E3G_FREQ_REG_MAX 0xffff 572 573 /* 3G external box types */ 574 #define E3G_GINA3G_BOX_TYPE 0x00 575 #define E3G_LAYLA3G_BOX_TYPE 0x10 576 #define E3G_ASIC_NOT_LOADED 0xffff 577 #define E3G_BOX_TYPE_MASK 0xf0 578 579 #define EXT_3GBOX_NC 0x01 580 #define EXT_3GBOX_NOT_SET 0x02 581 582 583 /* 584 * 585 * Gina20 & Layla20 have input gain controls for the analog inputs; 586 * this is the magic number for the hardware that gives you 0 dB at -10. 587 * 588 */ 589 590 #define GL20_INPUT_GAIN_MAGIC_NUMBER 0xC8 591 592 593 /* 594 * 595 * Defines how much time must pass between DSP load attempts 596 * 597 */ 598 599 #define DSP_LOAD_ATTEMPT_PERIOD 1000000L /* One second */ 600 601 602 /* 603 * 604 * Size of arrays for the comm page. MAX_PLAY_TAPS and MAX_REC_TAPS are 605 * no longer used, but the sizes must still be right for the DSP to see 606 * the comm page correctly. 607 * 608 */ 609 610 #define MONITOR_ARRAY_SIZE 0x180 611 #define VMIXER_ARRAY_SIZE 0x40 612 #define MIDI_OUT_BUFFER_SIZE 32 613 #define MIDI_IN_BUFFER_SIZE 256 614 #define MAX_PLAY_TAPS 168 615 #define MAX_REC_TAPS 192 616 #define DSP_MIDI_OUT_FIFO_SIZE 64 617 618 619 /* sg_entry is a single entry for the scatter-gather list. The array of struct 620 sg_entry struct is read by the DSP, so all values must be little-endian. */ 621 622 #define MAX_SGLIST_ENTRIES 512 623 624 struct sg_entry { 625 u32 addr; 626 u32 size; 627 }; 628 629 630 /**************************************************************************** 631 632 The comm page. This structure is read and written by the DSP; the 633 DSP code is a firm believer in the byte offsets written in the comments 634 at the end of each line. This structure should not be changed. 635 636 Any reads from or writes to this structure should be in little-endian format. 637 638 ****************************************************************************/ 639 640 struct comm_page { /* Base Length*/ 641 u32 comm_size; /* size of this object 0x000 4 */ 642 u32 flags; /* See Appendix A below 0x004 4 */ 643 u32 unused; /* Unused entry 0x008 4 */ 644 u32 sample_rate; /* Card sample rate in Hz 0x00c 4 */ 645 u32 handshake; /* DSP command handshake 0x010 4 */ 646 u32 cmd_start; /* Chs. to start mask 0x014 4 */ 647 u32 cmd_stop; /* Chs. to stop mask 0x018 4 */ 648 u32 cmd_reset; /* Chs. to reset mask 0x01c 4 */ 649 u16 audio_format[DSP_MAXPIPES]; /* Chs. audio format 0x020 32*2 */ 650 struct sg_entry sglist_addr[DSP_MAXPIPES]; 651 /* Chs. Physical sglist addrs 0x060 32*8 */ 652 u32 position[DSP_MAXPIPES]; 653 /* Positions for ea. ch. 0x160 32*4 */ 654 s8 vu_meter[DSP_MAXPIPES]; 655 /* VU meters 0x1e0 32*1 */ 656 s8 peak_meter[DSP_MAXPIPES]; 657 /* Peak meters 0x200 32*1 */ 658 s8 line_out_level[DSP_MAXAUDIOOUTPUTS]; 659 /* Output gain 0x220 16*1 */ 660 s8 line_in_level[DSP_MAXAUDIOINPUTS]; 661 /* Input gain 0x230 16*1 */ 662 s8 monitors[MONITOR_ARRAY_SIZE]; 663 /* Monitor map 0x240 0x180 */ 664 u32 play_coeff[MAX_PLAY_TAPS]; 665 /* Gina/Darla play filters - obsolete 0x3c0 168*4 */ 666 u32 rec_coeff[MAX_REC_TAPS]; 667 /* Gina/Darla record filters - obsolete 0x660 192*4 */ 668 u16 midi_input[MIDI_IN_BUFFER_SIZE]; 669 /* MIDI input data transfer buffer 0x960 256*2 */ 670 u8 gd_clock_state; /* Chg Gina/Darla clock state 0xb60 1 */ 671 u8 gd_spdif_status; /* Chg. Gina/Darla S/PDIF state 0xb61 1 */ 672 u8 gd_resampler_state; /* Should always be 3 0xb62 1 */ 673 u8 filler2; /* 0xb63 1 */ 674 u32 nominal_level_mask; /* -10 level enable mask 0xb64 4 */ 675 u16 input_clock; /* Chg. Input clock state 0xb68 2 */ 676 u16 output_clock; /* Chg. Output clock state 0xb6a 2 */ 677 u32 status_clocks; /* Current Input clock state 0xb6c 4 */ 678 u32 ext_box_status; /* External box status 0xb70 4 */ 679 u32 cmd_add_buffer; /* Pipes to add (obsolete) 0xb74 4 */ 680 u32 midi_out_free_count; 681 /* # of bytes free in MIDI output FIFO 0xb78 4 */ 682 u32 unused2; /* Cyclic pipes 0xb7c 4 */ 683 u32 control_register; 684 /* Mona, Gina24, Layla24, 3G ctrl reg 0xb80 4 */ 685 u32 e3g_frq_register; /* 3G frequency register 0xb84 4 */ 686 u8 filler[24]; /* filler 0xb88 24*1 */ 687 s8 vmixer[VMIXER_ARRAY_SIZE]; 688 /* Vmixer levels 0xba0 64*1 */ 689 u8 midi_output[MIDI_OUT_BUFFER_SIZE]; 690 /* MIDI output data 0xbe0 32*1 */ 691 }; 692 693 #endif /* _ECHO_DSP_ */ 694