1 /**************************************************************************** 2 3 Copyright Echo Digital Audio Corporation (c) 1998 - 2004 4 All rights reserved 5 www.echoaudio.com 6 7 This file is part of Echo Digital Audio's generic driver library. 8 9 Echo Digital Audio's generic driver library is free software; 10 you can redistribute it and/or modify it under the terms of 11 the GNU General Public License as published by the Free Software 12 Foundation. 13 14 This program is distributed in the hope that it will be useful, 15 but WITHOUT ANY WARRANTY; without even the implied warranty of 16 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 17 GNU General Public License for more details. 18 19 You should have received a copy of the GNU General Public License 20 along with this program; if not, write to the Free Software 21 Foundation, Inc., 59 Temple Place - Suite 330, Boston, 22 MA 02111-1307, USA. 23 24 ************************************************************************* 25 26 Translation from C++ and adaptation for use in ALSA-Driver 27 were made by Giuliano Pochini <pochini@shiny.it> 28 29 ****************************************************************************/ 30 31 32 33 /* These functions are common for all "3G" cards */ 34 35 36 static int check_asic_status(struct echoaudio *chip) 37 { 38 u32 box_status; 39 40 if (wait_handshake(chip)) 41 return -EIO; 42 43 chip->comm_page->ext_box_status = cpu_to_le32(E3G_ASIC_NOT_LOADED); 44 chip->asic_loaded = false; 45 clear_handshake(chip); 46 send_vector(chip, DSP_VC_TEST_ASIC); 47 48 if (wait_handshake(chip)) { 49 chip->dsp_code = NULL; 50 return -EIO; 51 } 52 53 box_status = le32_to_cpu(chip->comm_page->ext_box_status); 54 dev_dbg(chip->card->dev, "box_status=%x\n", box_status); 55 if (box_status == E3G_ASIC_NOT_LOADED) 56 return -ENODEV; 57 58 chip->asic_loaded = true; 59 return box_status & E3G_BOX_TYPE_MASK; 60 } 61 62 63 64 static inline u32 get_frq_reg(struct echoaudio *chip) 65 { 66 return le32_to_cpu(chip->comm_page->e3g_frq_register); 67 } 68 69 70 71 /* Most configuration of 3G cards is accomplished by writing the control 72 register. write_control_reg sends the new control register value to the DSP. */ 73 static int write_control_reg(struct echoaudio *chip, u32 ctl, u32 frq, 74 char force) 75 { 76 __le32 ctl_reg, frq_reg; 77 78 if (wait_handshake(chip)) 79 return -EIO; 80 81 dev_dbg(chip->card->dev, 82 "WriteControlReg: Setting 0x%x, 0x%x\n", ctl, frq); 83 84 ctl_reg = cpu_to_le32(ctl); 85 frq_reg = cpu_to_le32(frq); 86 87 if (ctl_reg != chip->comm_page->control_register || 88 frq_reg != chip->comm_page->e3g_frq_register || force) { 89 chip->comm_page->e3g_frq_register = frq_reg; 90 chip->comm_page->control_register = ctl_reg; 91 clear_handshake(chip); 92 return send_vector(chip, DSP_VC_WRITE_CONTROL_REG); 93 } 94 95 dev_dbg(chip->card->dev, "WriteControlReg: not written, no change\n"); 96 return 0; 97 } 98 99 100 101 /* Set the digital mode - currently for Gina24, Layla24, Mona, 3G */ 102 static int set_digital_mode(struct echoaudio *chip, u8 mode) 103 { 104 u8 previous_mode; 105 int err, i, o; 106 107 /* All audio channels must be closed before changing the digital mode */ 108 if (snd_BUG_ON(chip->pipe_alloc_mask)) 109 return -EAGAIN; 110 111 if (snd_BUG_ON(!(chip->digital_modes & (1 << mode)))) 112 return -EINVAL; 113 114 previous_mode = chip->digital_mode; 115 err = dsp_set_digital_mode(chip, mode); 116 117 /* If we successfully changed the digital mode from or to ADAT, 118 * then make sure all output, input and monitor levels are 119 * updated by the DSP comm object. */ 120 if (err >= 0 && previous_mode != mode && 121 (previous_mode == DIGITAL_MODE_ADAT || mode == DIGITAL_MODE_ADAT)) { 122 spin_lock_irq(&chip->lock); 123 for (o = 0; o < num_busses_out(chip); o++) 124 for (i = 0; i < num_busses_in(chip); i++) 125 set_monitor_gain(chip, o, i, 126 chip->monitor_gain[o][i]); 127 128 #ifdef ECHOCARD_HAS_INPUT_GAIN 129 for (i = 0; i < num_busses_in(chip); i++) 130 set_input_gain(chip, i, chip->input_gain[i]); 131 update_input_line_level(chip); 132 #endif 133 134 for (o = 0; o < num_busses_out(chip); o++) 135 set_output_gain(chip, o, chip->output_gain[o]); 136 update_output_line_level(chip); 137 spin_unlock_irq(&chip->lock); 138 } 139 140 return err; 141 } 142 143 144 145 static u32 set_spdif_bits(struct echoaudio *chip, u32 control_reg, u32 rate) 146 { 147 control_reg &= E3G_SPDIF_FORMAT_CLEAR_MASK; 148 149 switch (rate) { 150 case 32000 : 151 control_reg |= E3G_SPDIF_SAMPLE_RATE0 | E3G_SPDIF_SAMPLE_RATE1; 152 break; 153 case 44100 : 154 if (chip->professional_spdif) 155 control_reg |= E3G_SPDIF_SAMPLE_RATE0; 156 break; 157 case 48000 : 158 control_reg |= E3G_SPDIF_SAMPLE_RATE1; 159 break; 160 } 161 162 if (chip->professional_spdif) 163 control_reg |= E3G_SPDIF_PRO_MODE; 164 165 if (chip->non_audio_spdif) 166 control_reg |= E3G_SPDIF_NOT_AUDIO; 167 168 control_reg |= E3G_SPDIF_24_BIT | E3G_SPDIF_TWO_CHANNEL | 169 E3G_SPDIF_COPY_PERMIT; 170 171 return control_reg; 172 } 173 174 175 176 /* Set the S/PDIF output format */ 177 static int set_professional_spdif(struct echoaudio *chip, char prof) 178 { 179 u32 control_reg; 180 181 control_reg = le32_to_cpu(chip->comm_page->control_register); 182 chip->professional_spdif = prof; 183 control_reg = set_spdif_bits(chip, control_reg, chip->sample_rate); 184 return write_control_reg(chip, control_reg, get_frq_reg(chip), 0); 185 } 186 187 188 189 /* detect_input_clocks() returns a bitmask consisting of all the input clocks 190 currently connected to the hardware; this changes as the user connects and 191 disconnects clock inputs. You should use this information to determine which 192 clocks the user is allowed to select. */ 193 static u32 detect_input_clocks(const struct echoaudio *chip) 194 { 195 u32 clocks_from_dsp, clock_bits; 196 197 /* Map the DSP clock detect bits to the generic driver clock 198 * detect bits */ 199 clocks_from_dsp = le32_to_cpu(chip->comm_page->status_clocks); 200 201 clock_bits = ECHO_CLOCK_BIT_INTERNAL; 202 203 if (clocks_from_dsp & E3G_CLOCK_DETECT_BIT_WORD) 204 clock_bits |= ECHO_CLOCK_BIT_WORD; 205 206 switch(chip->digital_mode) { 207 case DIGITAL_MODE_SPDIF_RCA: 208 case DIGITAL_MODE_SPDIF_OPTICAL: 209 if (clocks_from_dsp & E3G_CLOCK_DETECT_BIT_SPDIF) 210 clock_bits |= ECHO_CLOCK_BIT_SPDIF; 211 break; 212 case DIGITAL_MODE_ADAT: 213 if (clocks_from_dsp & E3G_CLOCK_DETECT_BIT_ADAT) 214 clock_bits |= ECHO_CLOCK_BIT_ADAT; 215 break; 216 } 217 218 return clock_bits; 219 } 220 221 222 223 static int load_asic(struct echoaudio *chip) 224 { 225 int box_type, err; 226 227 if (chip->asic_loaded) 228 return 0; 229 230 /* Give the DSP a few milliseconds to settle down */ 231 mdelay(2); 232 233 err = load_asic_generic(chip, DSP_FNC_LOAD_3G_ASIC, FW_3G_ASIC); 234 if (err < 0) 235 return err; 236 237 chip->asic_code = FW_3G_ASIC; 238 239 /* Now give the new ASIC some time to set up */ 240 msleep(1000); 241 /* See if it worked */ 242 box_type = check_asic_status(chip); 243 244 /* Set up the control register if the load succeeded - 245 * 48 kHz, internal clock, S/PDIF RCA mode */ 246 if (box_type >= 0) { 247 err = write_control_reg(chip, E3G_48KHZ, 248 E3G_FREQ_REG_DEFAULT, true); 249 if (err < 0) 250 return err; 251 } 252 253 return box_type; 254 } 255 256 257 258 static int set_sample_rate(struct echoaudio *chip, u32 rate) 259 { 260 u32 control_reg, clock, base_rate, frq_reg; 261 262 /* Only set the clock for internal mode. */ 263 if (chip->input_clock != ECHO_CLOCK_INTERNAL) { 264 dev_warn(chip->card->dev, 265 "Cannot set sample rate - clock not set to CLK_CLOCKININTERNAL\n"); 266 /* Save the rate anyhow */ 267 chip->comm_page->sample_rate = cpu_to_le32(rate); 268 chip->sample_rate = rate; 269 set_input_clock(chip, chip->input_clock); 270 return 0; 271 } 272 273 if (snd_BUG_ON(rate >= 50000 && 274 chip->digital_mode == DIGITAL_MODE_ADAT)) 275 return -EINVAL; 276 277 clock = 0; 278 control_reg = le32_to_cpu(chip->comm_page->control_register); 279 control_reg &= E3G_CLOCK_CLEAR_MASK; 280 281 switch (rate) { 282 case 96000: 283 clock = E3G_96KHZ; 284 break; 285 case 88200: 286 clock = E3G_88KHZ; 287 break; 288 case 48000: 289 clock = E3G_48KHZ; 290 break; 291 case 44100: 292 clock = E3G_44KHZ; 293 break; 294 case 32000: 295 clock = E3G_32KHZ; 296 break; 297 default: 298 clock = E3G_CONTINUOUS_CLOCK; 299 if (rate > 50000) 300 clock |= E3G_DOUBLE_SPEED_MODE; 301 break; 302 } 303 304 control_reg |= clock; 305 control_reg = set_spdif_bits(chip, control_reg, rate); 306 307 base_rate = rate; 308 if (base_rate > 50000) 309 base_rate /= 2; 310 if (base_rate < 32000) 311 base_rate = 32000; 312 313 frq_reg = E3G_MAGIC_NUMBER / base_rate - 2; 314 if (frq_reg > E3G_FREQ_REG_MAX) 315 frq_reg = E3G_FREQ_REG_MAX; 316 317 chip->comm_page->sample_rate = cpu_to_le32(rate); /* ignored by the DSP */ 318 chip->sample_rate = rate; 319 dev_dbg(chip->card->dev, 320 "SetSampleRate: %d clock %x\n", rate, control_reg); 321 322 /* Tell the DSP about it - DSP reads both control reg & freq reg */ 323 return write_control_reg(chip, control_reg, frq_reg, 0); 324 } 325 326 327 328 /* Set the sample clock source to internal, S/PDIF, ADAT */ 329 static int set_input_clock(struct echoaudio *chip, u16 clock) 330 { 331 u32 control_reg, clocks_from_dsp; 332 333 334 /* Mask off the clock select bits */ 335 control_reg = le32_to_cpu(chip->comm_page->control_register) & 336 E3G_CLOCK_CLEAR_MASK; 337 clocks_from_dsp = le32_to_cpu(chip->comm_page->status_clocks); 338 339 switch (clock) { 340 case ECHO_CLOCK_INTERNAL: 341 chip->input_clock = ECHO_CLOCK_INTERNAL; 342 return set_sample_rate(chip, chip->sample_rate); 343 case ECHO_CLOCK_SPDIF: 344 if (chip->digital_mode == DIGITAL_MODE_ADAT) 345 return -EAGAIN; 346 control_reg |= E3G_SPDIF_CLOCK; 347 if (clocks_from_dsp & E3G_CLOCK_DETECT_BIT_SPDIF96) 348 control_reg |= E3G_DOUBLE_SPEED_MODE; 349 else 350 control_reg &= ~E3G_DOUBLE_SPEED_MODE; 351 break; 352 case ECHO_CLOCK_ADAT: 353 if (chip->digital_mode != DIGITAL_MODE_ADAT) 354 return -EAGAIN; 355 control_reg |= E3G_ADAT_CLOCK; 356 control_reg &= ~E3G_DOUBLE_SPEED_MODE; 357 break; 358 case ECHO_CLOCK_WORD: 359 control_reg |= E3G_WORD_CLOCK; 360 if (clocks_from_dsp & E3G_CLOCK_DETECT_BIT_WORD96) 361 control_reg |= E3G_DOUBLE_SPEED_MODE; 362 else 363 control_reg &= ~E3G_DOUBLE_SPEED_MODE; 364 break; 365 default: 366 dev_err(chip->card->dev, 367 "Input clock 0x%x not supported for Echo3G\n", clock); 368 return -EINVAL; 369 } 370 371 chip->input_clock = clock; 372 return write_control_reg(chip, control_reg, get_frq_reg(chip), 1); 373 } 374 375 376 377 static int dsp_set_digital_mode(struct echoaudio *chip, u8 mode) 378 { 379 u32 control_reg; 380 int err, incompatible_clock; 381 382 /* Set clock to "internal" if it's not compatible with the new mode */ 383 incompatible_clock = false; 384 switch (mode) { 385 case DIGITAL_MODE_SPDIF_OPTICAL: 386 case DIGITAL_MODE_SPDIF_RCA: 387 if (chip->input_clock == ECHO_CLOCK_ADAT) 388 incompatible_clock = true; 389 break; 390 case DIGITAL_MODE_ADAT: 391 if (chip->input_clock == ECHO_CLOCK_SPDIF) 392 incompatible_clock = true; 393 break; 394 default: 395 dev_err(chip->card->dev, 396 "Digital mode not supported: %d\n", mode); 397 return -EINVAL; 398 } 399 400 spin_lock_irq(&chip->lock); 401 402 if (incompatible_clock) { 403 chip->sample_rate = 48000; 404 set_input_clock(chip, ECHO_CLOCK_INTERNAL); 405 } 406 407 /* Clear the current digital mode */ 408 control_reg = le32_to_cpu(chip->comm_page->control_register); 409 control_reg &= E3G_DIGITAL_MODE_CLEAR_MASK; 410 411 /* Tweak the control reg */ 412 switch (mode) { 413 case DIGITAL_MODE_SPDIF_OPTICAL: 414 control_reg |= E3G_SPDIF_OPTICAL_MODE; 415 break; 416 case DIGITAL_MODE_SPDIF_RCA: 417 /* E3G_SPDIF_OPTICAL_MODE bit cleared */ 418 break; 419 case DIGITAL_MODE_ADAT: 420 control_reg |= E3G_ADAT_MODE; 421 control_reg &= ~E3G_DOUBLE_SPEED_MODE; /* @@ useless */ 422 break; 423 } 424 425 err = write_control_reg(chip, control_reg, get_frq_reg(chip), 1); 426 spin_unlock_irq(&chip->lock); 427 if (err < 0) 428 return err; 429 chip->digital_mode = mode; 430 431 dev_dbg(chip->card->dev, "set_digital_mode(%d)\n", chip->digital_mode); 432 return incompatible_clock; 433 } 434