1 /**************************************************************************** 2 3 Copyright Echo Digital Audio Corporation (c) 1998 - 2004 4 All rights reserved 5 www.echoaudio.com 6 7 This file is part of Echo Digital Audio's generic driver library. 8 9 Echo Digital Audio's generic driver library is free software; 10 you can redistribute it and/or modify it under the terms of 11 the GNU General Public License as published by the Free Software 12 Foundation. 13 14 This program is distributed in the hope that it will be useful, 15 but WITHOUT ANY WARRANTY; without even the implied warranty of 16 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 17 GNU General Public License for more details. 18 19 You should have received a copy of the GNU General Public License 20 along with this program; if not, write to the Free Software 21 Foundation, Inc., 59 Temple Place - Suite 330, Boston, 22 MA 02111-1307, USA. 23 24 ************************************************************************* 25 26 Translation from C++ and adaptation for use in ALSA-Driver 27 were made by Giuliano Pochini <pochini@shiny.it> 28 29 ****************************************************************************/ 30 31 32 33 /* These functions are common for all "3G" cards */ 34 35 36 static int check_asic_status(struct echoaudio *chip) 37 { 38 u32 box_status; 39 40 if (wait_handshake(chip)) 41 return -EIO; 42 43 chip->comm_page->ext_box_status = cpu_to_le32(E3G_ASIC_NOT_LOADED); 44 chip->asic_loaded = FALSE; 45 clear_handshake(chip); 46 send_vector(chip, DSP_VC_TEST_ASIC); 47 48 if (wait_handshake(chip)) { 49 chip->dsp_code = NULL; 50 return -EIO; 51 } 52 53 box_status = le32_to_cpu(chip->comm_page->ext_box_status); 54 dev_dbg(chip->card->dev, "box_status=%x\n", box_status); 55 if (box_status == E3G_ASIC_NOT_LOADED) 56 return -ENODEV; 57 58 chip->asic_loaded = TRUE; 59 return box_status & E3G_BOX_TYPE_MASK; 60 } 61 62 63 64 static inline u32 get_frq_reg(struct echoaudio *chip) 65 { 66 return le32_to_cpu(chip->comm_page->e3g_frq_register); 67 } 68 69 70 71 /* Most configuration of 3G cards is accomplished by writing the control 72 register. write_control_reg sends the new control register value to the DSP. */ 73 static int write_control_reg(struct echoaudio *chip, u32 ctl, u32 frq, 74 char force) 75 { 76 if (wait_handshake(chip)) 77 return -EIO; 78 79 dev_dbg(chip->card->dev, 80 "WriteControlReg: Setting 0x%x, 0x%x\n", ctl, frq); 81 82 ctl = cpu_to_le32(ctl); 83 frq = cpu_to_le32(frq); 84 85 if (ctl != chip->comm_page->control_register || 86 frq != chip->comm_page->e3g_frq_register || force) { 87 chip->comm_page->e3g_frq_register = frq; 88 chip->comm_page->control_register = ctl; 89 clear_handshake(chip); 90 return send_vector(chip, DSP_VC_WRITE_CONTROL_REG); 91 } 92 93 dev_dbg(chip->card->dev, "WriteControlReg: not written, no change\n"); 94 return 0; 95 } 96 97 98 99 /* Set the digital mode - currently for Gina24, Layla24, Mona, 3G */ 100 static int set_digital_mode(struct echoaudio *chip, u8 mode) 101 { 102 u8 previous_mode; 103 int err, i, o; 104 105 /* All audio channels must be closed before changing the digital mode */ 106 if (snd_BUG_ON(chip->pipe_alloc_mask)) 107 return -EAGAIN; 108 109 if (snd_BUG_ON(!(chip->digital_modes & (1 << mode)))) 110 return -EINVAL; 111 112 previous_mode = chip->digital_mode; 113 err = dsp_set_digital_mode(chip, mode); 114 115 /* If we successfully changed the digital mode from or to ADAT, 116 * then make sure all output, input and monitor levels are 117 * updated by the DSP comm object. */ 118 if (err >= 0 && previous_mode != mode && 119 (previous_mode == DIGITAL_MODE_ADAT || mode == DIGITAL_MODE_ADAT)) { 120 spin_lock_irq(&chip->lock); 121 for (o = 0; o < num_busses_out(chip); o++) 122 for (i = 0; i < num_busses_in(chip); i++) 123 set_monitor_gain(chip, o, i, 124 chip->monitor_gain[o][i]); 125 126 #ifdef ECHOCARD_HAS_INPUT_GAIN 127 for (i = 0; i < num_busses_in(chip); i++) 128 set_input_gain(chip, i, chip->input_gain[i]); 129 update_input_line_level(chip); 130 #endif 131 132 for (o = 0; o < num_busses_out(chip); o++) 133 set_output_gain(chip, o, chip->output_gain[o]); 134 update_output_line_level(chip); 135 spin_unlock_irq(&chip->lock); 136 } 137 138 return err; 139 } 140 141 142 143 static u32 set_spdif_bits(struct echoaudio *chip, u32 control_reg, u32 rate) 144 { 145 control_reg &= E3G_SPDIF_FORMAT_CLEAR_MASK; 146 147 switch (rate) { 148 case 32000 : 149 control_reg |= E3G_SPDIF_SAMPLE_RATE0 | E3G_SPDIF_SAMPLE_RATE1; 150 break; 151 case 44100 : 152 if (chip->professional_spdif) 153 control_reg |= E3G_SPDIF_SAMPLE_RATE0; 154 break; 155 case 48000 : 156 control_reg |= E3G_SPDIF_SAMPLE_RATE1; 157 break; 158 } 159 160 if (chip->professional_spdif) 161 control_reg |= E3G_SPDIF_PRO_MODE; 162 163 if (chip->non_audio_spdif) 164 control_reg |= E3G_SPDIF_NOT_AUDIO; 165 166 control_reg |= E3G_SPDIF_24_BIT | E3G_SPDIF_TWO_CHANNEL | 167 E3G_SPDIF_COPY_PERMIT; 168 169 return control_reg; 170 } 171 172 173 174 /* Set the S/PDIF output format */ 175 static int set_professional_spdif(struct echoaudio *chip, char prof) 176 { 177 u32 control_reg; 178 179 control_reg = le32_to_cpu(chip->comm_page->control_register); 180 chip->professional_spdif = prof; 181 control_reg = set_spdif_bits(chip, control_reg, chip->sample_rate); 182 return write_control_reg(chip, control_reg, get_frq_reg(chip), 0); 183 } 184 185 186 187 /* detect_input_clocks() returns a bitmask consisting of all the input clocks 188 currently connected to the hardware; this changes as the user connects and 189 disconnects clock inputs. You should use this information to determine which 190 clocks the user is allowed to select. */ 191 static u32 detect_input_clocks(const struct echoaudio *chip) 192 { 193 u32 clocks_from_dsp, clock_bits; 194 195 /* Map the DSP clock detect bits to the generic driver clock 196 * detect bits */ 197 clocks_from_dsp = le32_to_cpu(chip->comm_page->status_clocks); 198 199 clock_bits = ECHO_CLOCK_BIT_INTERNAL; 200 201 if (clocks_from_dsp & E3G_CLOCK_DETECT_BIT_WORD) 202 clock_bits |= ECHO_CLOCK_BIT_WORD; 203 204 switch(chip->digital_mode) { 205 case DIGITAL_MODE_SPDIF_RCA: 206 case DIGITAL_MODE_SPDIF_OPTICAL: 207 if (clocks_from_dsp & E3G_CLOCK_DETECT_BIT_SPDIF) 208 clock_bits |= ECHO_CLOCK_BIT_SPDIF; 209 break; 210 case DIGITAL_MODE_ADAT: 211 if (clocks_from_dsp & E3G_CLOCK_DETECT_BIT_ADAT) 212 clock_bits |= ECHO_CLOCK_BIT_ADAT; 213 break; 214 } 215 216 return clock_bits; 217 } 218 219 220 221 static int load_asic(struct echoaudio *chip) 222 { 223 int box_type, err; 224 225 if (chip->asic_loaded) 226 return 0; 227 228 /* Give the DSP a few milliseconds to settle down */ 229 mdelay(2); 230 231 err = load_asic_generic(chip, DSP_FNC_LOAD_3G_ASIC, FW_3G_ASIC); 232 if (err < 0) 233 return err; 234 235 chip->asic_code = FW_3G_ASIC; 236 237 /* Now give the new ASIC some time to set up */ 238 msleep(1000); 239 /* See if it worked */ 240 box_type = check_asic_status(chip); 241 242 /* Set up the control register if the load succeeded - 243 * 48 kHz, internal clock, S/PDIF RCA mode */ 244 if (box_type >= 0) { 245 err = write_control_reg(chip, E3G_48KHZ, 246 E3G_FREQ_REG_DEFAULT, TRUE); 247 if (err < 0) 248 return err; 249 } 250 251 return box_type; 252 } 253 254 255 256 static int set_sample_rate(struct echoaudio *chip, u32 rate) 257 { 258 u32 control_reg, clock, base_rate, frq_reg; 259 260 /* Only set the clock for internal mode. */ 261 if (chip->input_clock != ECHO_CLOCK_INTERNAL) { 262 dev_warn(chip->card->dev, 263 "Cannot set sample rate - clock not set to CLK_CLOCKININTERNAL\n"); 264 /* Save the rate anyhow */ 265 chip->comm_page->sample_rate = cpu_to_le32(rate); 266 chip->sample_rate = rate; 267 set_input_clock(chip, chip->input_clock); 268 return 0; 269 } 270 271 if (snd_BUG_ON(rate >= 50000 && 272 chip->digital_mode == DIGITAL_MODE_ADAT)) 273 return -EINVAL; 274 275 clock = 0; 276 control_reg = le32_to_cpu(chip->comm_page->control_register); 277 control_reg &= E3G_CLOCK_CLEAR_MASK; 278 279 switch (rate) { 280 case 96000: 281 clock = E3G_96KHZ; 282 break; 283 case 88200: 284 clock = E3G_88KHZ; 285 break; 286 case 48000: 287 clock = E3G_48KHZ; 288 break; 289 case 44100: 290 clock = E3G_44KHZ; 291 break; 292 case 32000: 293 clock = E3G_32KHZ; 294 break; 295 default: 296 clock = E3G_CONTINUOUS_CLOCK; 297 if (rate > 50000) 298 clock |= E3G_DOUBLE_SPEED_MODE; 299 break; 300 } 301 302 control_reg |= clock; 303 control_reg = set_spdif_bits(chip, control_reg, rate); 304 305 base_rate = rate; 306 if (base_rate > 50000) 307 base_rate /= 2; 308 if (base_rate < 32000) 309 base_rate = 32000; 310 311 frq_reg = E3G_MAGIC_NUMBER / base_rate - 2; 312 if (frq_reg > E3G_FREQ_REG_MAX) 313 frq_reg = E3G_FREQ_REG_MAX; 314 315 chip->comm_page->sample_rate = cpu_to_le32(rate); /* ignored by the DSP */ 316 chip->sample_rate = rate; 317 dev_dbg(chip->card->dev, 318 "SetSampleRate: %d clock %x\n", rate, control_reg); 319 320 /* Tell the DSP about it - DSP reads both control reg & freq reg */ 321 return write_control_reg(chip, control_reg, frq_reg, 0); 322 } 323 324 325 326 /* Set the sample clock source to internal, S/PDIF, ADAT */ 327 static int set_input_clock(struct echoaudio *chip, u16 clock) 328 { 329 u32 control_reg, clocks_from_dsp; 330 331 332 /* Mask off the clock select bits */ 333 control_reg = le32_to_cpu(chip->comm_page->control_register) & 334 E3G_CLOCK_CLEAR_MASK; 335 clocks_from_dsp = le32_to_cpu(chip->comm_page->status_clocks); 336 337 switch (clock) { 338 case ECHO_CLOCK_INTERNAL: 339 chip->input_clock = ECHO_CLOCK_INTERNAL; 340 return set_sample_rate(chip, chip->sample_rate); 341 case ECHO_CLOCK_SPDIF: 342 if (chip->digital_mode == DIGITAL_MODE_ADAT) 343 return -EAGAIN; 344 control_reg |= E3G_SPDIF_CLOCK; 345 if (clocks_from_dsp & E3G_CLOCK_DETECT_BIT_SPDIF96) 346 control_reg |= E3G_DOUBLE_SPEED_MODE; 347 else 348 control_reg &= ~E3G_DOUBLE_SPEED_MODE; 349 break; 350 case ECHO_CLOCK_ADAT: 351 if (chip->digital_mode != DIGITAL_MODE_ADAT) 352 return -EAGAIN; 353 control_reg |= E3G_ADAT_CLOCK; 354 control_reg &= ~E3G_DOUBLE_SPEED_MODE; 355 break; 356 case ECHO_CLOCK_WORD: 357 control_reg |= E3G_WORD_CLOCK; 358 if (clocks_from_dsp & E3G_CLOCK_DETECT_BIT_WORD96) 359 control_reg |= E3G_DOUBLE_SPEED_MODE; 360 else 361 control_reg &= ~E3G_DOUBLE_SPEED_MODE; 362 break; 363 default: 364 dev_err(chip->card->dev, 365 "Input clock 0x%x not supported for Echo3G\n", clock); 366 return -EINVAL; 367 } 368 369 chip->input_clock = clock; 370 return write_control_reg(chip, control_reg, get_frq_reg(chip), 1); 371 } 372 373 374 375 static int dsp_set_digital_mode(struct echoaudio *chip, u8 mode) 376 { 377 u32 control_reg; 378 int err, incompatible_clock; 379 380 /* Set clock to "internal" if it's not compatible with the new mode */ 381 incompatible_clock = FALSE; 382 switch (mode) { 383 case DIGITAL_MODE_SPDIF_OPTICAL: 384 case DIGITAL_MODE_SPDIF_RCA: 385 if (chip->input_clock == ECHO_CLOCK_ADAT) 386 incompatible_clock = TRUE; 387 break; 388 case DIGITAL_MODE_ADAT: 389 if (chip->input_clock == ECHO_CLOCK_SPDIF) 390 incompatible_clock = TRUE; 391 break; 392 default: 393 dev_err(chip->card->dev, 394 "Digital mode not supported: %d\n", mode); 395 return -EINVAL; 396 } 397 398 spin_lock_irq(&chip->lock); 399 400 if (incompatible_clock) { 401 chip->sample_rate = 48000; 402 set_input_clock(chip, ECHO_CLOCK_INTERNAL); 403 } 404 405 /* Clear the current digital mode */ 406 control_reg = le32_to_cpu(chip->comm_page->control_register); 407 control_reg &= E3G_DIGITAL_MODE_CLEAR_MASK; 408 409 /* Tweak the control reg */ 410 switch (mode) { 411 case DIGITAL_MODE_SPDIF_OPTICAL: 412 control_reg |= E3G_SPDIF_OPTICAL_MODE; 413 break; 414 case DIGITAL_MODE_SPDIF_RCA: 415 /* E3G_SPDIF_OPTICAL_MODE bit cleared */ 416 break; 417 case DIGITAL_MODE_ADAT: 418 control_reg |= E3G_ADAT_MODE; 419 control_reg &= ~E3G_DOUBLE_SPEED_MODE; /* @@ useless */ 420 break; 421 } 422 423 err = write_control_reg(chip, control_reg, get_frq_reg(chip), 1); 424 spin_unlock_irq(&chip->lock); 425 if (err < 0) 426 return err; 427 chip->digital_mode = mode; 428 429 dev_dbg(chip->card->dev, "set_digital_mode(%d)\n", chip->digital_mode); 430 return incompatible_clock; 431 } 432