1 /**************************************************************************** 2 3 Copyright Echo Digital Audio Corporation (c) 1998 - 2004 4 All rights reserved 5 www.echoaudio.com 6 7 This file is part of Echo Digital Audio's generic driver library. 8 9 Echo Digital Audio's generic driver library is free software; 10 you can redistribute it and/or modify it under the terms of 11 the GNU General Public License as published by the Free Software 12 Foundation. 13 14 This program is distributed in the hope that it will be useful, 15 but WITHOUT ANY WARRANTY; without even the implied warranty of 16 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 17 GNU General Public License for more details. 18 19 You should have received a copy of the GNU General Public License 20 along with this program; if not, write to the Free Software 21 Foundation, Inc., 59 Temple Place - Suite 330, Boston, 22 MA 02111-1307, USA. 23 24 **************************************************************************** 25 26 Translation from C++ and adaptation for use in ALSA-Driver 27 were made by Giuliano Pochini <pochini@shiny.it> 28 29 **************************************************************************** 30 31 32 Here's a block diagram of how most of the cards work: 33 34 +-----------+ 35 record | |<-------------------- Inputs 36 <-------| | | 37 PCI | Transport | | 38 bus | engine | \|/ 39 ------->| | +-------+ 40 play | |--->|monitor|-------> Outputs 41 +-----------+ | mixer | 42 +-------+ 43 44 The lines going to and from the PCI bus represent "pipes". A pipe performs 45 audio transport - moving audio data to and from buffers on the host via 46 bus mastering. 47 48 The inputs and outputs on the right represent input and output "busses." 49 A bus is a physical, real connection to the outside world. An example 50 of a bus would be the 1/4" analog connectors on the back of Layla or 51 an RCA S/PDIF connector. 52 53 For most cards, there is a one-to-one correspondence between outputs 54 and busses; that is, each individual pipe is hard-wired to a single bus. 55 56 Cards that work this way are Darla20, Gina20, Layla20, Darla24, Gina24, 57 Layla24, Mona, and Indigo. 58 59 60 Mia has a feature called "virtual outputs." 61 62 63 +-----------+ 64 record | |<----------------------------- Inputs 65 <-------| | | 66 PCI | Transport | | 67 bus | engine | \|/ 68 ------->| | +------+ +-------+ 69 play | |-->|vmixer|-->|monitor|-------> Outputs 70 +-----------+ +------+ | mixer | 71 +-------+ 72 73 74 Obviously, the difference here is the box labeled "vmixer." Vmixer is 75 short for "virtual output mixer." For Mia, pipes are *not* hard-wired 76 to a single bus; the vmixer lets you mix any pipe to any bus in any 77 combination. 78 79 Note, however, that the left-hand side of the diagram is unchanged. 80 Transport works exactly the same way - the difference is in the mixer stage. 81 82 83 Pipes and busses are numbered starting at zero. 84 85 86 87 Pipe index 88 ========== 89 90 A number of calls in CEchoGals refer to a "pipe index". A pipe index is 91 a unique number for a pipe that unambiguously refers to a playback or record 92 pipe. Pipe indices are numbered starting with analog outputs, followed by 93 digital outputs, then analog inputs, then digital inputs. 94 95 Take Gina24 as an example: 96 97 Pipe index 98 99 0-7 Analog outputs (0 .. FirstDigitalBusOut-1) 100 8-15 Digital outputs (FirstDigitalBusOut .. NumBussesOut-1) 101 16-17 Analog inputs 102 18-25 Digital inputs 103 104 105 You get the pipe index by calling CEchoGals::OpenAudio; the other transport 106 functions take the pipe index as a parameter. If you need a pipe index for 107 some other reason, use the handy Makepipe_index method. 108 109 110 Some calls take a CChannelMask parameter; CChannelMask is a handy way to 111 group pipe indices. 112 113 114 115 Digital mode switch 116 =================== 117 118 Some cards (right now, Gina24, Layla24, and Mona) have a Digital Mode Switch 119 or DMS. Cards with a DMS can be set to one of three mutually exclusive 120 digital modes: S/PDIF RCA, S/PDIF optical, or ADAT optical. 121 122 This may create some confusion since ADAT optical is 8 channels wide and 123 S/PDIF is only two channels wide. Gina24, Layla24, and Mona handle this 124 by acting as if they always have 8 digital outs and ins. If you are in 125 either S/PDIF mode, the last 6 channels don't do anything - data sent 126 out these channels is thrown away and you will always record zeros. 127 128 Note that with Gina24, Layla24, and Mona, sample rates above 50 kHz are 129 only available if you have the card configured for S/PDIF optical or S/PDIF 130 RCA. 131 132 133 134 Double speed mode 135 ================= 136 137 Some of the cards support 88.2 kHz and 96 kHz sampling (Darla24, Gina24, 138 Layla24, Mona, Mia, and Indigo). For these cards, the driver sometimes has 139 to worry about "double speed mode"; double speed mode applies whenever the 140 sampling rate is above 50 kHz. 141 142 For instance, Mona and Layla24 support word clock sync. However, they 143 actually support two different word clock modes - single speed (below 144 50 kHz) and double speed (above 50 kHz). The hardware detects if a single 145 or double speed word clock signal is present; the generic code uses that 146 information to determine which mode to use. 147 148 The generic code takes care of all this for you. 149 */ 150 151 152 #ifndef _ECHOAUDIO_H_ 153 #define _ECHOAUDIO_H_ 154 155 156 #include "echoaudio_dsp.h" 157 158 159 160 /*********************************************************************** 161 162 PCI configuration space 163 164 ***********************************************************************/ 165 166 /* 167 * PCI vendor ID and device IDs for the hardware 168 */ 169 #define VENDOR_ID 0x1057 170 #define DEVICE_ID_56301 0x1801 171 #define DEVICE_ID_56361 0x3410 172 #define SUBVENDOR_ID 0xECC0 173 174 175 /* 176 * Valid Echo PCI subsystem card IDs 177 */ 178 #define DARLA20 0x0010 179 #define GINA20 0x0020 180 #define LAYLA20 0x0030 181 #define DARLA24 0x0040 182 #define GINA24 0x0050 183 #define LAYLA24 0x0060 184 #define MONA 0x0070 185 #define MIA 0x0080 186 #define INDIGO 0x0090 187 #define INDIGO_IO 0x00a0 188 #define INDIGO_DJ 0x00b0 189 #define DC8 0x00c0 190 #define INDIGO_IOX 0x00d0 191 #define INDIGO_DJX 0x00e0 192 #define ECHO3G 0x0100 193 194 195 /************************************************************************ 196 197 Array sizes and so forth 198 199 ***********************************************************************/ 200 201 /* 202 * Sizes 203 */ 204 #define ECHO_MAXAUDIOINPUTS 32 /* Max audio input channels */ 205 #define ECHO_MAXAUDIOOUTPUTS 32 /* Max audio output channels */ 206 #define ECHO_MAXAUDIOPIPES 32 /* Max number of input and output 207 * pipes */ 208 #define E3G_MAX_OUTPUTS 16 209 #define ECHO_MAXMIDIJACKS 1 /* Max MIDI ports */ 210 #define ECHO_MIDI_QUEUE_SZ 512 /* Max MIDI input queue entries */ 211 #define ECHO_MTC_QUEUE_SZ 32 /* Max MIDI time code input queue 212 * entries */ 213 214 /* 215 * MIDI activity indicator timeout 216 */ 217 #define MIDI_ACTIVITY_TIMEOUT_USEC 200000 218 219 220 /**************************************************************************** 221 222 Clocks 223 224 *****************************************************************************/ 225 226 /* 227 * Clock numbers 228 */ 229 #define ECHO_CLOCK_INTERNAL 0 230 #define ECHO_CLOCK_WORD 1 231 #define ECHO_CLOCK_SUPER 2 232 #define ECHO_CLOCK_SPDIF 3 233 #define ECHO_CLOCK_ADAT 4 234 #define ECHO_CLOCK_ESYNC 5 235 #define ECHO_CLOCK_ESYNC96 6 236 #define ECHO_CLOCK_MTC 7 237 #define ECHO_CLOCK_NUMBER 8 238 #define ECHO_CLOCKS 0xffff 239 240 /* 241 * Clock bit numbers - used to report capabilities and whatever clocks 242 * are being detected dynamically. 243 */ 244 #define ECHO_CLOCK_BIT_INTERNAL (1 << ECHO_CLOCK_INTERNAL) 245 #define ECHO_CLOCK_BIT_WORD (1 << ECHO_CLOCK_WORD) 246 #define ECHO_CLOCK_BIT_SUPER (1 << ECHO_CLOCK_SUPER) 247 #define ECHO_CLOCK_BIT_SPDIF (1 << ECHO_CLOCK_SPDIF) 248 #define ECHO_CLOCK_BIT_ADAT (1 << ECHO_CLOCK_ADAT) 249 #define ECHO_CLOCK_BIT_ESYNC (1 << ECHO_CLOCK_ESYNC) 250 #define ECHO_CLOCK_BIT_ESYNC96 (1 << ECHO_CLOCK_ESYNC96) 251 #define ECHO_CLOCK_BIT_MTC (1<<ECHO_CLOCK_MTC) 252 253 254 /*************************************************************************** 255 256 Digital modes 257 258 ****************************************************************************/ 259 260 /* 261 * Digital modes for Mona, Layla24, and Gina24 262 */ 263 #define DIGITAL_MODE_NONE 0xFF 264 #define DIGITAL_MODE_SPDIF_RCA 0 265 #define DIGITAL_MODE_SPDIF_OPTICAL 1 266 #define DIGITAL_MODE_ADAT 2 267 #define DIGITAL_MODE_SPDIF_CDROM 3 268 #define DIGITAL_MODES 4 269 270 /* 271 * Digital mode capability masks 272 */ 273 #define ECHOCAPS_HAS_DIGITAL_MODE_SPDIF_RCA (1 << DIGITAL_MODE_SPDIF_RCA) 274 #define ECHOCAPS_HAS_DIGITAL_MODE_SPDIF_OPTICAL (1 << DIGITAL_MODE_SPDIF_OPTICAL) 275 #define ECHOCAPS_HAS_DIGITAL_MODE_ADAT (1 << DIGITAL_MODE_ADAT) 276 #define ECHOCAPS_HAS_DIGITAL_MODE_SPDIF_CDROM (1 << DIGITAL_MODE_SPDIF_CDROM) 277 278 279 #define EXT_3GBOX_NC 0x01 /* 3G box not connected */ 280 #define EXT_3GBOX_NOT_SET 0x02 /* 3G box not detected yet */ 281 282 283 #define ECHOGAIN_MUTED (-128) /* Minimum possible gain */ 284 #define ECHOGAIN_MINOUT (-128) /* Min output gain (dB) */ 285 #define ECHOGAIN_MAXOUT (6) /* Max output gain (dB) */ 286 #define ECHOGAIN_MININP (-50) /* Min input gain (0.5 dB) */ 287 #define ECHOGAIN_MAXINP (50) /* Max input gain (0.5 dB) */ 288 289 #define PIPE_STATE_STOPPED 0 /* Pipe has been reset */ 290 #define PIPE_STATE_PAUSED 1 /* Pipe has been stopped */ 291 #define PIPE_STATE_STARTED 2 /* Pipe has been started */ 292 #define PIPE_STATE_PENDING 3 /* Pipe has pending start */ 293 294 295 296 struct audiopipe { 297 volatile __le32 *dma_counter; /* Commpage register that contains 298 * the current dma position 299 * (lower 32 bits only) 300 */ 301 u32 last_counter; /* The last position, which is used 302 * to compute... 303 */ 304 u32 position; /* ...the number of bytes tranferred 305 * by the DMA engine, modulo the 306 * buffer size 307 */ 308 short index; /* Index of the first channel or <0 309 * if hw is not configured yet 310 */ 311 short interleave; 312 struct snd_dma_buffer sgpage; /* Room for the scatter-gather list */ 313 struct snd_pcm_hardware hw; 314 struct snd_pcm_hw_constraint_list constr; 315 short sglist_head; 316 char state; /* pipe state */ 317 }; 318 319 320 struct audioformat { 321 u8 interleave; /* How the data is arranged in memory: 322 * mono = 1, stereo = 2, ... 323 */ 324 u8 bits_per_sample; /* 8, 16, 24, 32 (24 bits left aligned) */ 325 char mono_to_stereo; /* Only used if interleave is 1 and 326 * if this is an output pipe. 327 */ 328 char data_are_bigendian; /* 1 = big endian, 0 = little endian */ 329 }; 330 331 332 struct echoaudio { 333 spinlock_t lock; 334 struct snd_pcm_substream *substream[DSP_MAXPIPES]; 335 int last_period[DSP_MAXPIPES]; 336 struct mutex mode_mutex; 337 u16 num_digital_modes, digital_mode_list[6]; 338 u16 num_clock_sources, clock_source_list[10]; 339 atomic_t opencount; 340 struct snd_kcontrol *clock_src_ctl; 341 struct snd_pcm *analog_pcm, *digital_pcm; 342 struct snd_card *card; 343 const char *card_name; 344 struct pci_dev *pci; 345 unsigned long dsp_registers_phys; 346 struct resource *iores; 347 struct snd_dma_buffer commpage_dma_buf; 348 int irq; 349 #ifdef ECHOCARD_HAS_MIDI 350 struct snd_rawmidi *rmidi; 351 struct snd_rawmidi_substream *midi_in, *midi_out; 352 #endif 353 struct timer_list timer; 354 char tinuse; /* Timer in use */ 355 char midi_full; /* MIDI output buffer is full */ 356 char can_set_rate; 357 char rate_set; 358 359 /* This stuff is used mainly by the lowlevel code */ 360 struct comm_page *comm_page; /* Virtual address of the memory 361 * seen by DSP 362 */ 363 u32 pipe_alloc_mask; /* Bitmask of allocated pipes */ 364 u32 pipe_cyclic_mask; /* Bitmask of pipes with cyclic 365 * buffers 366 */ 367 u32 sample_rate; /* Card sample rate in Hz */ 368 u8 digital_mode; /* Current digital mode 369 * (see DIGITAL_MODE_*) 370 */ 371 u8 spdif_status; /* Gina20, Darla20, Darla24 - only */ 372 u8 clock_state; /* Gina20, Darla20, Darla24 - only */ 373 u8 input_clock; /* Currently selected sample clock 374 * source 375 */ 376 u8 output_clock; /* Layla20 only */ 377 char meters_enabled; /* VU-meters status */ 378 char asic_loaded; /* Set true when ASIC loaded */ 379 char bad_board; /* Set true if DSP won't load */ 380 char professional_spdif; /* 0 = consumer; 1 = professional */ 381 char non_audio_spdif; /* 3G - only */ 382 char digital_in_automute; /* Gina24, Layla24, Mona - only */ 383 char has_phantom_power; 384 char hasnt_input_nominal_level; /* Gina3G */ 385 char phantom_power; /* Gina3G - only */ 386 char has_midi; 387 char midi_input_enabled; 388 389 #ifdef ECHOCARD_ECHO3G 390 /* External module -dependent pipe and bus indexes */ 391 char px_digital_out, px_analog_in, px_digital_in, px_num; 392 char bx_digital_out, bx_analog_in, bx_digital_in, bx_num; 393 #endif 394 395 char nominal_level[ECHO_MAXAUDIOPIPES]; /* True == -10dBV 396 * False == +4dBu */ 397 s8 input_gain[ECHO_MAXAUDIOINPUTS]; /* Input level -50..+50 398 * unit is 0.5dB */ 399 s8 output_gain[ECHO_MAXAUDIOOUTPUTS]; /* Output level -128..+6 dB 400 * (-128=muted) */ 401 s8 monitor_gain[ECHO_MAXAUDIOOUTPUTS][ECHO_MAXAUDIOINPUTS]; 402 /* -128..+6 dB */ 403 s8 vmixer_gain[ECHO_MAXAUDIOOUTPUTS][ECHO_MAXAUDIOOUTPUTS]; 404 /* -128..+6 dB */ 405 406 u16 digital_modes; /* Bitmask of supported modes 407 * (see ECHOCAPS_HAS_DIGITAL_MODE_*) */ 408 u16 input_clock_types; /* Suppoted input clock types */ 409 u16 output_clock_types; /* Suppoted output clock types - 410 * Layla20 only */ 411 u16 device_id, subdevice_id; 412 u16 *dsp_code; /* Current DSP code loaded, 413 * NULL if nothing loaded */ 414 short dsp_code_to_load; /* DSP code to load */ 415 short asic_code; /* Current ASIC code */ 416 u32 comm_page_phys; /* Physical address of the 417 * memory seen by DSP */ 418 volatile u32 __iomem *dsp_registers; /* DSP's register base */ 419 u32 active_mask; /* Chs. active mask or 420 * punks out */ 421 #ifdef CONFIG_PM_SLEEP 422 const struct firmware *fw_cache[8]; /* Cached firmwares */ 423 #endif 424 425 #ifdef ECHOCARD_HAS_MIDI 426 u16 mtc_state; /* State for MIDI input parsing state machine */ 427 u8 midi_buffer[MIDI_IN_BUFFER_SIZE]; 428 #endif 429 }; 430 431 432 static int init_dsp_comm_page(struct echoaudio *chip); 433 static int init_line_levels(struct echoaudio *chip); 434 static int free_pipes(struct echoaudio *chip, struct audiopipe *pipe); 435 static int load_firmware(struct echoaudio *chip); 436 static int wait_handshake(struct echoaudio *chip); 437 static int send_vector(struct echoaudio *chip, u32 command); 438 static int get_firmware(const struct firmware **fw_entry, 439 struct echoaudio *chip, const short fw_index); 440 static void free_firmware(const struct firmware *fw_entry, 441 struct echoaudio *chip); 442 443 #ifdef ECHOCARD_HAS_MIDI 444 static int enable_midi_input(struct echoaudio *chip, char enable); 445 static void snd_echo_midi_output_trigger( 446 struct snd_rawmidi_substream *substream, int up); 447 static int midi_service_irq(struct echoaudio *chip); 448 static int snd_echo_midi_create(struct snd_card *card, 449 struct echoaudio *chip); 450 #endif 451 452 453 static inline void clear_handshake(struct echoaudio *chip) 454 { 455 chip->comm_page->handshake = 0; 456 } 457 458 static inline u32 get_dsp_register(struct echoaudio *chip, u32 index) 459 { 460 return readl(&chip->dsp_registers[index]); 461 } 462 463 static inline void set_dsp_register(struct echoaudio *chip, u32 index, 464 u32 value) 465 { 466 writel(value, &chip->dsp_registers[index]); 467 } 468 469 470 /* Pipe and bus indexes. PX_* and BX_* are defined as chip->px_* and chip->bx_* 471 for 3G cards because they depend on the external box. They are integer 472 constants for all other cards. 473 Never use those defines directly, use the following functions instead. */ 474 475 static inline int px_digital_out(const struct echoaudio *chip) 476 { 477 return PX_DIGITAL_OUT; 478 } 479 480 static inline int px_analog_in(const struct echoaudio *chip) 481 { 482 return PX_ANALOG_IN; 483 } 484 485 static inline int px_digital_in(const struct echoaudio *chip) 486 { 487 return PX_DIGITAL_IN; 488 } 489 490 static inline int px_num(const struct echoaudio *chip) 491 { 492 return PX_NUM; 493 } 494 495 static inline int bx_digital_out(const struct echoaudio *chip) 496 { 497 return BX_DIGITAL_OUT; 498 } 499 500 static inline int bx_analog_in(const struct echoaudio *chip) 501 { 502 return BX_ANALOG_IN; 503 } 504 505 static inline int bx_digital_in(const struct echoaudio *chip) 506 { 507 return BX_DIGITAL_IN; 508 } 509 510 static inline int bx_num(const struct echoaudio *chip) 511 { 512 return BX_NUM; 513 } 514 515 static inline int num_pipes_out(const struct echoaudio *chip) 516 { 517 return px_analog_in(chip); 518 } 519 520 static inline int num_pipes_in(const struct echoaudio *chip) 521 { 522 return px_num(chip) - px_analog_in(chip); 523 } 524 525 static inline int num_busses_out(const struct echoaudio *chip) 526 { 527 return bx_analog_in(chip); 528 } 529 530 static inline int num_busses_in(const struct echoaudio *chip) 531 { 532 return bx_num(chip) - bx_analog_in(chip); 533 } 534 535 static inline int num_analog_busses_out(const struct echoaudio *chip) 536 { 537 return bx_digital_out(chip); 538 } 539 540 static inline int num_analog_busses_in(const struct echoaudio *chip) 541 { 542 return bx_digital_in(chip) - bx_analog_in(chip); 543 } 544 545 static inline int num_digital_busses_out(const struct echoaudio *chip) 546 { 547 return num_busses_out(chip) - num_analog_busses_out(chip); 548 } 549 550 static inline int num_digital_busses_in(const struct echoaudio *chip) 551 { 552 return num_busses_in(chip) - num_analog_busses_in(chip); 553 } 554 555 /* The monitor array is a one-dimensional array; compute the offset 556 * into the array */ 557 static inline int monitor_index(const struct echoaudio *chip, int out, int in) 558 { 559 return out * num_busses_in(chip) + in; 560 } 561 562 #endif /* _ECHOAUDIO_H_ */ 563