1 /* azt3328.c - driver for Aztech AZF3328 based soundcards (e.g. PCI168). 2 * Copyright (C) 2002, 2005 - 2011 by Andreas Mohr <andi AT lisas.de> 3 * 4 * Framework borrowed from Bart Hartgers's als4000.c. 5 * Driver developed on PCI168 AP(W) version (PCI rev. 10, subsystem ID 1801), 6 * found in a Fujitsu-Siemens PC ("Cordant", aluminum case). 7 * Other versions are: 8 * PCI168 A(W), sub ID 1800 9 * PCI168 A/AP, sub ID 8000 10 * Please give me feedback in case you try my driver with one of these!! 11 * 12 * Keywords: Windows XP Vista 168nt4-125.zip 168win95-125.zip PCI 168 download 13 * (XP/Vista do not support this card at all but every Linux distribution 14 * has very good support out of the box; 15 * just to make sure that the right people hit this and get to know that, 16 * despite the high level of Internet ignorance - as usual :-P - 17 * about very good support for this card - on Linux!) 18 * 19 * GPL LICENSE 20 * This program is free software; you can redistribute it and/or modify 21 * it under the terms of the GNU General Public License as published by 22 * the Free Software Foundation; either version 2 of the License, or 23 * (at your option) any later version. 24 * 25 * This program is distributed in the hope that it will be useful, 26 * but WITHOUT ANY WARRANTY; without even the implied warranty of 27 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 28 * GNU General Public License for more details. 29 30 * You should have received a copy of the GNU General Public License 31 * along with this program; if not, write to the Free Software 32 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA 33 * 34 * NOTES 35 * Since Aztech does not provide any chipset documentation, 36 * even on repeated request to various addresses, 37 * and the answer that was finally given was negative 38 * (and I was stupid enough to manage to get hold of a PCI168 soundcard 39 * in the first place >:-P}), 40 * I was forced to base this driver on reverse engineering 41 * (3 weeks' worth of evenings filled with driver work). 42 * (and no, I did NOT go the easy way: to pick up a SB PCI128 for 9 Euros) 43 * 44 * It is quite likely that the AZF3328 chip is the PCI cousin of the 45 * AZF3318 ("azt1020 pnp", "MM Pro 16") ISA chip, given very similar specs. 46 * 47 * The AZF3328 chip (note: AZF3328, *not* AZT3328, that's just the driver name 48 * for compatibility reasons) from Azfin (joint-venture of Aztech and Fincitec, 49 * Fincitec acquired by National Semiconductor in 2002, together with the 50 * Fincitec-related company ARSmikro) has the following features: 51 * 52 * - compatibility & compliance: 53 * - Microsoft PC 97 ("PC 97 Hardware Design Guide", 54 * http://www.microsoft.com/whdc/archive/pcguides.mspx) 55 * - Microsoft PC 98 Baseline Audio 56 * - MPU401 UART 57 * - Sound Blaster Emulation (DOS Box) 58 * - builtin AC97 conformant codec (SNR over 80dB) 59 * Note that "conformant" != "compliant"!! this chip's mixer register layout 60 * *differs* from the standard AC97 layout: 61 * they chose to not implement the headphone register (which is not a 62 * problem since it's merely optional), yet when doing this, they committed 63 * the grave sin of letting other registers follow immediately instead of 64 * keeping a headphone dummy register, thereby shifting the mixer register 65 * addresses illegally. So far unfortunately it looks like the very flexible 66 * ALSA AC97 support is still not enough to easily compensate for such a 67 * grave layout violation despite all tweaks and quirks mechanisms it offers. 68 * Well, not quite: now ac97 layer is much improved (bus-specific ops!), 69 * thus I was able to implement support - it's actually working quite well. 70 * An interesting item might be Aztech AMR 2800-W, since it's an AC97 71 * modem card which might reveal the Aztech-specific codec ID which 72 * we might want to pretend, too. Dito PCI168's brother, PCI368, 73 * where the advertising datasheet says it's AC97-based and has a 74 * Digital Enhanced Game Port. 75 * - builtin genuine OPL3 - verified to work fine, 20080506 76 * - full duplex 16bit playback/record at independent sampling rate 77 * - MPU401 (+ legacy address support, claimed by one official spec sheet) 78 * FIXME: how to enable legacy addr?? 79 * - game port (legacy address support) 80 * - builtin DirectInput support, helps reduce CPU overhead (interrupt-driven 81 * features supported). - See common term "Digital Enhanced Game Port"... 82 * (probably DirectInput 3.0 spec - confirm) 83 * - builtin 3D enhancement (said to be YAMAHA Ymersion) 84 * - built-in General DirectX timer having a 20 bits counter 85 * with 1us resolution (see below!) 86 * - I2S serial output port for external DAC 87 * [FIXME: 3.3V or 5V level? maximum rate is 66.2kHz right?] 88 * - supports 33MHz PCI spec 2.1, PCI power management 1.0, compliant with ACPI 89 * - supports hardware volume control 90 * - single chip low cost solution (128 pin QFP) 91 * - supports programmable Sub-vendor and Sub-system ID [24C02 SEEPROM chip] 92 * required for Microsoft's logo compliance (FIXME: where?) 93 * At least the Trident 4D Wave DX has one bit somewhere 94 * to enable writes to PCI subsystem VID registers, that should be it. 95 * This might easily be in extended PCI reg space, since PCI168 also has 96 * some custom data starting at 0x80. What kind of config settings 97 * are located in our extended PCI space anyway?? 98 * - PCI168 AP(W) card: power amplifier with 4 Watts/channel at 4 Ohms 99 * [TDA1517P chip] 100 * 101 * Note that this driver now is actually *better* than the Windows driver, 102 * since it additionally supports the card's 1MHz DirectX timer - just try 103 * the following snd-seq module parameters etc.: 104 * - options snd-seq seq_default_timer_class=2 seq_default_timer_sclass=0 105 * seq_default_timer_card=0 seq_client_load=1 seq_default_timer_device=0 106 * seq_default_timer_subdevice=0 seq_default_timer_resolution=1000000 107 * - "timidity -iAv -B2,8 -Os -EFreverb=0" 108 * - "pmidi -p 128:0 jazz.mid" 109 * 110 * OPL3 hardware playback testing, try something like: 111 * cat /proc/asound/hwdep 112 * and 113 * aconnect -o 114 * Then use 115 * sbiload -Dhw:x,y --opl3 /usr/share/sounds/opl3/std.o3 ......./drums.o3 116 * where x,y is the xx-yy number as given in hwdep. 117 * Then try 118 * pmidi -p a:b jazz.mid 119 * where a:b is the client number plus 0 usually, as given by aconnect above. 120 * Oh, and make sure to unmute the FM mixer control (doh!) 121 * NOTE: power use during OPL3 playback is _VERY_ high (70W --> 90W!) 122 * despite no CPU activity, possibly due to hindering ACPI idling somehow. 123 * Shouldn't be a problem of the AZF3328 chip itself, I'd hope. 124 * Higher PCM / FM mixer levels seem to conflict (causes crackling), 125 * at least sometimes. Maybe even use with hardware sequencer timer above :) 126 * adplay/adplug-utils might soon offer hardware-based OPL3 playback, too. 127 * 128 * Certain PCI versions of this card are susceptible to DMA traffic underruns 129 * in some systems (resulting in sound crackling/clicking/popping), 130 * probably because they don't have a DMA FIFO buffer or so. 131 * Overview (PCI ID/PCI subID/PCI rev.): 132 * - no DMA crackling on SiS735: 0x50DC/0x1801/16 133 * - unknown performance: 0x50DC/0x1801/10 134 * (well, it's not bad on an Athlon 1800 with now very optimized IRQ handler) 135 * 136 * Crackling happens with VIA chipsets or, in my case, an SiS735, which is 137 * supposed to be very fast and supposed to get rid of crackling much 138 * better than a VIA, yet ironically I still get crackling, like many other 139 * people with the same chipset. 140 * Possible remedies: 141 * - use speaker (amplifier) output instead of headphone output 142 * (in case crackling is due to overloaded output clipping) 143 * - plug card into a different PCI slot, preferably one that isn't shared 144 * too much (this helps a lot, but not completely!) 145 * - get rid of PCI VGA card, use AGP instead 146 * - upgrade or downgrade BIOS 147 * - fiddle with PCI latency settings (setpci -v -s BUSID latency_timer=XX) 148 * Not too helpful. 149 * - Disable ACPI/power management/"Auto Detect RAM/PCI Clk" in BIOS 150 * 151 * BUGS 152 * - full-duplex might *still* be problematic, however a recent test was fine 153 * - (non-bug) "Bass/Treble or 3D settings don't work" - they do get evaluated 154 * if you set PCM output switch to "pre 3D" instead of "post 3D". 155 * If this can't be set, then get a mixer application that Isn't Stupid (tm) 156 * (e.g. kmix, gamix) - unfortunately several are!! 157 * - locking is not entirely clean, especially the audio stream activity 158 * ints --> may be racy 159 * - an _unconnected_ secondary joystick at the gameport will be reported 160 * to be "active" (floating values, not precisely -1) due to the way we need 161 * to read the Digital Enhanced Game Port. Not sure whether it is fixable. 162 * 163 * TODO 164 * - use PCI_VDEVICE 165 * - verify driver status on x86_64 166 * - test multi-card driver operation 167 * - (ab)use 1MHz DirectX timer as kernel clocksource 168 * - test MPU401 MIDI playback etc. 169 * - add more power micro-management (disable various units of the card 170 * as long as they're unused, to improve audio quality and save power). 171 * However this requires more I/O ports which I haven't figured out yet 172 * and which thus might not even exist... 173 * The standard suspend/resume functionality could probably make use of 174 * some improvement, too... 175 * - figure out what all unknown port bits are responsible for 176 * - figure out some cleverly evil scheme to possibly make ALSA AC97 code 177 * fully accept our quite incompatible ""AC97"" mixer and thus save some 178 * code (but I'm not too optimistic that doing this is possible at all) 179 * - use MMIO (memory-mapped I/O)? Slightly faster access, e.g. for gameport. 180 */ 181 182 #include <asm/io.h> 183 #include <linux/init.h> 184 #include <linux/bug.h> /* WARN_ONCE */ 185 #include <linux/pci.h> 186 #include <linux/delay.h> 187 #include <linux/slab.h> 188 #include <linux/gameport.h> 189 #include <linux/module.h> 190 #include <linux/dma-mapping.h> 191 #include <sound/core.h> 192 #include <sound/control.h> 193 #include <sound/pcm.h> 194 #include <sound/rawmidi.h> 195 #include <sound/mpu401.h> 196 #include <sound/opl3.h> 197 #include <sound/initval.h> 198 /* 199 * Config switch, to use ALSA's AC97 layer instead of old custom mixer crap. 200 * If the AC97 compatibility parts we needed to implement locally turn out 201 * to work nicely, then remove the old implementation eventually. 202 */ 203 #define AZF_USE_AC97_LAYER 1 204 205 #ifdef AZF_USE_AC97_LAYER 206 #include <sound/ac97_codec.h> 207 #endif 208 #include "azt3328.h" 209 210 MODULE_AUTHOR("Andreas Mohr <andi AT lisas.de>"); 211 MODULE_DESCRIPTION("Aztech AZF3328 (PCI168)"); 212 MODULE_LICENSE("GPL"); 213 MODULE_SUPPORTED_DEVICE("{{Aztech,AZF3328}}"); 214 215 #if defined(CONFIG_GAMEPORT) || (defined(MODULE) && defined(CONFIG_GAMEPORT_MODULE)) 216 #define SUPPORT_GAMEPORT 1 217 #endif 218 219 /* === Debug settings === 220 Further diagnostic functionality than the settings below 221 does not need to be provided, since one can easily write a POSIX shell script 222 to dump the card's I/O ports (those listed in lspci -v -v): 223 dump() 224 { 225 local descr=$1; local addr=$2; local count=$3 226 227 echo "${descr}: ${count} @ ${addr}:" 228 dd if=/dev/port skip=`printf %d ${addr}` count=${count} bs=1 \ 229 2>/dev/null| hexdump -C 230 } 231 and then use something like 232 "dump joy200 0x200 8", "dump mpu388 0x388 4", "dump joy 0xb400 8", 233 "dump codec00 0xa800 32", "dump mixer 0xb800 64", "dump synth 0xbc00 8", 234 possibly within a "while true; do ... sleep 1; done" loop. 235 Tweaking ports could be done using 236 VALSTRING="`printf "%02x" $value`" 237 printf "\x""$VALSTRING"|dd of=/dev/port seek=`printf %d ${addr}` bs=1 \ 238 2>/dev/null 239 */ 240 241 static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; /* Index 0-MAX */ 242 module_param_array(index, int, NULL, 0444); 243 MODULE_PARM_DESC(index, "Index value for AZF3328 soundcard."); 244 245 static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR; /* ID for this card */ 246 module_param_array(id, charp, NULL, 0444); 247 MODULE_PARM_DESC(id, "ID string for AZF3328 soundcard."); 248 249 static bool enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_PNP; /* Enable this card */ 250 module_param_array(enable, bool, NULL, 0444); 251 MODULE_PARM_DESC(enable, "Enable AZF3328 soundcard."); 252 253 static int seqtimer_scaling = 128; 254 module_param(seqtimer_scaling, int, 0444); 255 MODULE_PARM_DESC(seqtimer_scaling, "Set 1024000Hz sequencer timer scale factor (lockup danger!). Default 128."); 256 257 enum snd_azf3328_codec_type { 258 /* warning: fixed indices (also used for bitmask checks!) */ 259 AZF_CODEC_PLAYBACK = 0, 260 AZF_CODEC_CAPTURE = 1, 261 AZF_CODEC_I2S_OUT = 2, 262 }; 263 264 struct snd_azf3328_codec_data { 265 unsigned long io_base; /* keep first! (avoid offset calc) */ 266 unsigned int dma_base; /* helper to avoid an indirection in hotpath */ 267 spinlock_t *lock; /* TODO: convert to our own per-codec lock member */ 268 struct snd_pcm_substream *substream; 269 bool running; 270 enum snd_azf3328_codec_type type; 271 const char *name; 272 }; 273 274 struct snd_azf3328 { 275 /* often-used fields towards beginning, then grouped */ 276 277 unsigned long ctrl_io; /* usually 0xb000, size 128 */ 278 unsigned long game_io; /* usually 0xb400, size 8 */ 279 unsigned long mpu_io; /* usually 0xb800, size 4 */ 280 unsigned long opl3_io; /* usually 0xbc00, size 8 */ 281 unsigned long mixer_io; /* usually 0xc000, size 64 */ 282 283 spinlock_t reg_lock; 284 285 struct snd_timer *timer; 286 287 struct snd_pcm *pcm[3]; 288 289 /* playback, recording and I2S out codecs */ 290 struct snd_azf3328_codec_data codecs[3]; 291 292 #ifdef AZF_USE_AC97_LAYER 293 struct snd_ac97 *ac97; 294 #endif 295 296 struct snd_card *card; 297 struct snd_rawmidi *rmidi; 298 299 #ifdef SUPPORT_GAMEPORT 300 struct gameport *gameport; 301 u16 axes[4]; 302 #endif 303 304 struct pci_dev *pci; 305 int irq; 306 307 /* register 0x6a is write-only, thus need to remember setting. 308 * If we need to add more registers here, then we might try to fold this 309 * into some transparent combined shadow register handling with 310 * CONFIG_PM register storage below, but that's slightly difficult. */ 311 u16 shadow_reg_ctrl_6AH; 312 313 #ifdef CONFIG_PM_SLEEP 314 /* register value containers for power management 315 * Note: not always full I/O range preserved (similar to Win driver!) */ 316 u32 saved_regs_ctrl[AZF_ALIGN(AZF_IO_SIZE_CTRL_PM) / 4]; 317 u32 saved_regs_game[AZF_ALIGN(AZF_IO_SIZE_GAME_PM) / 4]; 318 u32 saved_regs_mpu[AZF_ALIGN(AZF_IO_SIZE_MPU_PM) / 4]; 319 u32 saved_regs_opl3[AZF_ALIGN(AZF_IO_SIZE_OPL3_PM) / 4]; 320 u32 saved_regs_mixer[AZF_ALIGN(AZF_IO_SIZE_MIXER_PM) / 4]; 321 #endif 322 }; 323 324 static DEFINE_PCI_DEVICE_TABLE(snd_azf3328_ids) = { 325 { 0x122D, 0x50DC, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* PCI168/3328 */ 326 { 0x122D, 0x80DA, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* 3328 */ 327 { 0, } 328 }; 329 330 MODULE_DEVICE_TABLE(pci, snd_azf3328_ids); 331 332 333 static int 334 snd_azf3328_io_reg_setb(unsigned reg, u8 mask, bool do_set) 335 { 336 /* Well, strictly spoken, the inb/outb sequence isn't atomic 337 and would need locking. However we currently don't care 338 since it potentially complicates matters. */ 339 u8 prev = inb(reg), new; 340 341 new = (do_set) ? (prev|mask) : (prev & ~mask); 342 /* we need to always write the new value no matter whether it differs 343 * or not, since some register bits don't indicate their setting */ 344 outb(new, reg); 345 if (new != prev) 346 return 1; 347 348 return 0; 349 } 350 351 static inline void 352 snd_azf3328_codec_outb(const struct snd_azf3328_codec_data *codec, 353 unsigned reg, 354 u8 value 355 ) 356 { 357 outb(value, codec->io_base + reg); 358 } 359 360 static inline u8 361 snd_azf3328_codec_inb(const struct snd_azf3328_codec_data *codec, unsigned reg) 362 { 363 return inb(codec->io_base + reg); 364 } 365 366 static inline void 367 snd_azf3328_codec_outw(const struct snd_azf3328_codec_data *codec, 368 unsigned reg, 369 u16 value 370 ) 371 { 372 outw(value, codec->io_base + reg); 373 } 374 375 static inline u16 376 snd_azf3328_codec_inw(const struct snd_azf3328_codec_data *codec, unsigned reg) 377 { 378 return inw(codec->io_base + reg); 379 } 380 381 static inline void 382 snd_azf3328_codec_outl(const struct snd_azf3328_codec_data *codec, 383 unsigned reg, 384 u32 value 385 ) 386 { 387 outl(value, codec->io_base + reg); 388 } 389 390 static inline void 391 snd_azf3328_codec_outl_multi(const struct snd_azf3328_codec_data *codec, 392 unsigned reg, const void *buffer, int count 393 ) 394 { 395 unsigned long addr = codec->io_base + reg; 396 if (count) { 397 const u32 *buf = buffer; 398 do { 399 outl(*buf++, addr); 400 addr += 4; 401 } while (--count); 402 } 403 } 404 405 static inline u32 406 snd_azf3328_codec_inl(const struct snd_azf3328_codec_data *codec, unsigned reg) 407 { 408 return inl(codec->io_base + reg); 409 } 410 411 static inline void 412 snd_azf3328_ctrl_outb(const struct snd_azf3328 *chip, unsigned reg, u8 value) 413 { 414 outb(value, chip->ctrl_io + reg); 415 } 416 417 static inline u8 418 snd_azf3328_ctrl_inb(const struct snd_azf3328 *chip, unsigned reg) 419 { 420 return inb(chip->ctrl_io + reg); 421 } 422 423 static inline u16 424 snd_azf3328_ctrl_inw(const struct snd_azf3328 *chip, unsigned reg) 425 { 426 return inw(chip->ctrl_io + reg); 427 } 428 429 static inline void 430 snd_azf3328_ctrl_outw(const struct snd_azf3328 *chip, unsigned reg, u16 value) 431 { 432 outw(value, chip->ctrl_io + reg); 433 } 434 435 static inline void 436 snd_azf3328_ctrl_outl(const struct snd_azf3328 *chip, unsigned reg, u32 value) 437 { 438 outl(value, chip->ctrl_io + reg); 439 } 440 441 static inline void 442 snd_azf3328_game_outb(const struct snd_azf3328 *chip, unsigned reg, u8 value) 443 { 444 outb(value, chip->game_io + reg); 445 } 446 447 static inline void 448 snd_azf3328_game_outw(const struct snd_azf3328 *chip, unsigned reg, u16 value) 449 { 450 outw(value, chip->game_io + reg); 451 } 452 453 static inline u8 454 snd_azf3328_game_inb(const struct snd_azf3328 *chip, unsigned reg) 455 { 456 return inb(chip->game_io + reg); 457 } 458 459 static inline u16 460 snd_azf3328_game_inw(const struct snd_azf3328 *chip, unsigned reg) 461 { 462 return inw(chip->game_io + reg); 463 } 464 465 static inline void 466 snd_azf3328_mixer_outw(const struct snd_azf3328 *chip, unsigned reg, u16 value) 467 { 468 outw(value, chip->mixer_io + reg); 469 } 470 471 static inline u16 472 snd_azf3328_mixer_inw(const struct snd_azf3328 *chip, unsigned reg) 473 { 474 return inw(chip->mixer_io + reg); 475 } 476 477 #define AZF_MUTE_BIT 0x80 478 479 static bool 480 snd_azf3328_mixer_mute_control(const struct snd_azf3328 *chip, 481 unsigned reg, bool do_mute 482 ) 483 { 484 unsigned long portbase = chip->mixer_io + reg + 1; 485 bool updated; 486 487 /* the mute bit is on the *second* (i.e. right) register of a 488 * left/right channel setting */ 489 updated = snd_azf3328_io_reg_setb(portbase, AZF_MUTE_BIT, do_mute); 490 491 /* indicate whether it was muted before */ 492 return (do_mute) ? !updated : updated; 493 } 494 495 static inline bool 496 snd_azf3328_mixer_mute_control_master(const struct snd_azf3328 *chip, 497 bool do_mute 498 ) 499 { 500 return snd_azf3328_mixer_mute_control( 501 chip, 502 IDX_MIXER_PLAY_MASTER, 503 do_mute 504 ); 505 } 506 507 static inline bool 508 snd_azf3328_mixer_mute_control_pcm(const struct snd_azf3328 *chip, 509 bool do_mute 510 ) 511 { 512 return snd_azf3328_mixer_mute_control( 513 chip, 514 IDX_MIXER_WAVEOUT, 515 do_mute 516 ); 517 } 518 519 static inline void 520 snd_azf3328_mixer_reset(const struct snd_azf3328 *chip) 521 { 522 /* reset (close) mixer: 523 * first mute master volume, then reset 524 */ 525 snd_azf3328_mixer_mute_control_master(chip, 1); 526 snd_azf3328_mixer_outw(chip, IDX_MIXER_RESET, 0x0000); 527 } 528 529 #ifdef AZF_USE_AC97_LAYER 530 531 static inline void 532 snd_azf3328_mixer_ac97_map_unsupported(const struct snd_azf3328 *chip, 533 unsigned short reg, const char *mode) 534 { 535 /* need to add some more or less clever emulation? */ 536 dev_warn(chip->card->dev, 537 "missing %s emulation for AC97 register 0x%02x!\n", 538 mode, reg); 539 } 540 541 /* 542 * Need to have _special_ AC97 mixer hardware register index mapper, 543 * to compensate for the issue of a rather AC97-incompatible hardware layout. 544 */ 545 #define AZF_REG_MASK 0x3f 546 #define AZF_AC97_REG_UNSUPPORTED 0x8000 547 #define AZF_AC97_REG_REAL_IO_READ 0x4000 548 #define AZF_AC97_REG_REAL_IO_WRITE 0x2000 549 #define AZF_AC97_REG_REAL_IO_RW \ 550 (AZF_AC97_REG_REAL_IO_READ | AZF_AC97_REG_REAL_IO_WRITE) 551 #define AZF_AC97_REG_EMU_IO_READ 0x0400 552 #define AZF_AC97_REG_EMU_IO_WRITE 0x0200 553 #define AZF_AC97_REG_EMU_IO_RW \ 554 (AZF_AC97_REG_EMU_IO_READ | AZF_AC97_REG_EMU_IO_WRITE) 555 static unsigned short 556 snd_azf3328_mixer_ac97_map_reg_idx(unsigned short reg) 557 { 558 static const struct { 559 unsigned short azf_reg; 560 } azf_reg_mapper[] = { 561 /* Especially when taking into consideration 562 * mono/stereo-based sequence of azf vs. AC97 control series, 563 * it's quite obvious that azf simply got rid 564 * of the AC97_HEADPHONE control at its intended offset, 565 * thus shifted _all_ controls by one, 566 * and _then_ simply added it as an FMSYNTH control at the end, 567 * to make up for the offset. 568 * This means we'll have to translate indices here as 569 * needed and then do some tiny AC97 patch action 570 * (snd_ac97_rename_vol_ctl() etc.) - that's it. 571 */ 572 { /* AC97_RESET */ IDX_MIXER_RESET 573 | AZF_AC97_REG_REAL_IO_WRITE 574 | AZF_AC97_REG_EMU_IO_READ }, 575 { /* AC97_MASTER */ IDX_MIXER_PLAY_MASTER }, 576 /* note large shift: AC97_HEADPHONE to IDX_MIXER_FMSYNTH! */ 577 { /* AC97_HEADPHONE */ IDX_MIXER_FMSYNTH }, 578 { /* AC97_MASTER_MONO */ IDX_MIXER_MODEMOUT }, 579 { /* AC97_MASTER_TONE */ IDX_MIXER_BASSTREBLE }, 580 { /* AC97_PC_BEEP */ IDX_MIXER_PCBEEP }, 581 { /* AC97_PHONE */ IDX_MIXER_MODEMIN }, 582 { /* AC97_MIC */ IDX_MIXER_MIC }, 583 { /* AC97_LINE */ IDX_MIXER_LINEIN }, 584 { /* AC97_CD */ IDX_MIXER_CDAUDIO }, 585 { /* AC97_VIDEO */ IDX_MIXER_VIDEO }, 586 { /* AC97_AUX */ IDX_MIXER_AUX }, 587 { /* AC97_PCM */ IDX_MIXER_WAVEOUT }, 588 { /* AC97_REC_SEL */ IDX_MIXER_REC_SELECT }, 589 { /* AC97_REC_GAIN */ IDX_MIXER_REC_VOLUME }, 590 { /* AC97_REC_GAIN_MIC */ AZF_AC97_REG_EMU_IO_RW }, 591 { /* AC97_GENERAL_PURPOSE */ IDX_MIXER_ADVCTL2 }, 592 { /* AC97_3D_CONTROL */ IDX_MIXER_ADVCTL1 }, 593 }; 594 595 unsigned short reg_azf = AZF_AC97_REG_UNSUPPORTED; 596 597 /* azf3328 supports the low-numbered and low-spec:ed range 598 of AC97 regs only */ 599 if (reg <= AC97_3D_CONTROL) { 600 unsigned short reg_idx = reg / 2; 601 reg_azf = azf_reg_mapper[reg_idx].azf_reg; 602 /* a translation-only entry means it's real read/write: */ 603 if (!(reg_azf & ~AZF_REG_MASK)) 604 reg_azf |= AZF_AC97_REG_REAL_IO_RW; 605 } else { 606 switch (reg) { 607 case AC97_POWERDOWN: 608 reg_azf = AZF_AC97_REG_EMU_IO_RW; 609 break; 610 case AC97_EXTENDED_ID: 611 reg_azf = AZF_AC97_REG_EMU_IO_READ; 612 break; 613 case AC97_EXTENDED_STATUS: 614 /* I don't know what the h*ll AC97 layer 615 * would consult this _extended_ register for 616 * given a base-AC97-advertised card, 617 * but let's just emulate it anyway :-P 618 */ 619 reg_azf = AZF_AC97_REG_EMU_IO_RW; 620 break; 621 case AC97_VENDOR_ID1: 622 case AC97_VENDOR_ID2: 623 reg_azf = AZF_AC97_REG_EMU_IO_READ; 624 break; 625 } 626 } 627 return reg_azf; 628 } 629 630 static const unsigned short 631 azf_emulated_ac97_caps = 632 AC97_BC_DEDICATED_MIC | 633 AC97_BC_BASS_TREBLE | 634 /* Headphone is an FM Synth control here */ 635 AC97_BC_HEADPHONE | 636 /* no AC97_BC_LOUDNESS! */ 637 /* mask 0x7c00 is 638 vendor-specific 3D enhancement 639 vendor indicator. 640 Since there actually _is_ an 641 entry for Aztech Labs 642 (13), make damn sure 643 to indicate it. */ 644 (13 << 10); 645 646 static const unsigned short 647 azf_emulated_ac97_powerdown = 648 /* pretend everything to be active */ 649 AC97_PD_ADC_STATUS | 650 AC97_PD_DAC_STATUS | 651 AC97_PD_MIXER_STATUS | 652 AC97_PD_VREF_STATUS; 653 654 /* 655 * Emulated, _inofficial_ vendor ID 656 * (there might be some devices such as the MR 2800-W 657 * which could reveal the real Aztech AC97 ID). 658 * We choose to use "AZT" prefix, and then use 1 to indicate PCI168 659 * (better don't use 0x68 since there's a PCI368 as well). 660 */ 661 static const unsigned int 662 azf_emulated_ac97_vendor_id = 0x415a5401; 663 664 static unsigned short 665 snd_azf3328_mixer_ac97_read(struct snd_ac97 *ac97, unsigned short reg_ac97) 666 { 667 const struct snd_azf3328 *chip = ac97->private_data; 668 unsigned short reg_azf = snd_azf3328_mixer_ac97_map_reg_idx(reg_ac97); 669 unsigned short reg_val = 0; 670 bool unsupported = false; 671 672 dev_dbg(chip->card->dev, "snd_azf3328_mixer_ac97_read reg_ac97 %u\n", 673 reg_ac97); 674 if (reg_azf & AZF_AC97_REG_UNSUPPORTED) 675 unsupported = true; 676 else { 677 if (reg_azf & AZF_AC97_REG_REAL_IO_READ) 678 reg_val = snd_azf3328_mixer_inw(chip, 679 reg_azf & AZF_REG_MASK); 680 else { 681 /* 682 * Proceed with dummy I/O read, 683 * to ensure compatible timing where this may matter. 684 * (ALSA AC97 layer usually doesn't call I/O functions 685 * due to intelligent I/O caching anyway) 686 * Choose a mixer register that's thoroughly unrelated 687 * to common audio (try to minimize distortion). 688 */ 689 snd_azf3328_mixer_inw(chip, IDX_MIXER_SOMETHING30H); 690 } 691 692 if (reg_azf & AZF_AC97_REG_EMU_IO_READ) { 693 switch (reg_ac97) { 694 case AC97_RESET: 695 reg_val |= azf_emulated_ac97_caps; 696 break; 697 case AC97_POWERDOWN: 698 reg_val |= azf_emulated_ac97_powerdown; 699 break; 700 case AC97_EXTENDED_ID: 701 case AC97_EXTENDED_STATUS: 702 /* AFAICS we simply can't support anything: */ 703 reg_val |= 0; 704 break; 705 case AC97_VENDOR_ID1: 706 reg_val = azf_emulated_ac97_vendor_id >> 16; 707 break; 708 case AC97_VENDOR_ID2: 709 reg_val = azf_emulated_ac97_vendor_id & 0xffff; 710 break; 711 default: 712 unsupported = true; 713 break; 714 } 715 } 716 } 717 if (unsupported) 718 snd_azf3328_mixer_ac97_map_unsupported(chip, reg_ac97, "read"); 719 720 return reg_val; 721 } 722 723 static void 724 snd_azf3328_mixer_ac97_write(struct snd_ac97 *ac97, 725 unsigned short reg_ac97, unsigned short val) 726 { 727 const struct snd_azf3328 *chip = ac97->private_data; 728 unsigned short reg_azf = snd_azf3328_mixer_ac97_map_reg_idx(reg_ac97); 729 bool unsupported = false; 730 731 dev_dbg(chip->card->dev, 732 "snd_azf3328_mixer_ac97_write reg_ac97 %u val %u\n", 733 reg_ac97, val); 734 if (reg_azf & AZF_AC97_REG_UNSUPPORTED) 735 unsupported = true; 736 else { 737 if (reg_azf & AZF_AC97_REG_REAL_IO_WRITE) 738 snd_azf3328_mixer_outw( 739 chip, 740 reg_azf & AZF_REG_MASK, 741 val 742 ); 743 else 744 if (reg_azf & AZF_AC97_REG_EMU_IO_WRITE) { 745 switch (reg_ac97) { 746 case AC97_REC_GAIN_MIC: 747 case AC97_POWERDOWN: 748 case AC97_EXTENDED_STATUS: 749 /* 750 * Silently swallow these writes. 751 * Since for most registers our card doesn't 752 * actually support a comparable feature, 753 * this is exactly what we should do here. 754 * The AC97 layer's I/O caching probably 755 * automatically takes care of all the rest... 756 * (remembers written values etc.) 757 */ 758 break; 759 default: 760 unsupported = true; 761 break; 762 } 763 } 764 } 765 if (unsupported) 766 snd_azf3328_mixer_ac97_map_unsupported(chip, reg_ac97, "write"); 767 } 768 769 static int 770 snd_azf3328_mixer_new(struct snd_azf3328 *chip) 771 { 772 struct snd_ac97_bus *bus; 773 struct snd_ac97_template ac97; 774 static struct snd_ac97_bus_ops ops = { 775 .write = snd_azf3328_mixer_ac97_write, 776 .read = snd_azf3328_mixer_ac97_read, 777 }; 778 int rc; 779 780 memset(&ac97, 0, sizeof(ac97)); 781 ac97.scaps = AC97_SCAP_SKIP_MODEM 782 | AC97_SCAP_AUDIO /* we support audio! */ 783 | AC97_SCAP_NO_SPDIF; 784 ac97.private_data = chip; 785 ac97.pci = chip->pci; 786 787 /* 788 * ALSA's AC97 layer has terrible init crackling issues, 789 * unfortunately, and since it makes use of AC97_RESET, 790 * there's no use trying to mute Master Playback proactively. 791 */ 792 793 rc = snd_ac97_bus(chip->card, 0, &ops, NULL, &bus); 794 if (!rc) 795 rc = snd_ac97_mixer(bus, &ac97, &chip->ac97); 796 /* 797 * Make sure to complain loudly in case of AC97 init failure, 798 * since failure may happen quite often, 799 * due to this card being a very quirky AC97 "lookalike". 800 */ 801 if (rc) 802 dev_err(chip->card->dev, "AC97 init failed, err %d!\n", rc); 803 804 /* If we return an error here, then snd_card_free() should 805 * free up any ac97 codecs that got created, as well as the bus. 806 */ 807 return rc; 808 } 809 #else /* AZF_USE_AC97_LAYER */ 810 static void 811 snd_azf3328_mixer_write_volume_gradually(const struct snd_azf3328 *chip, 812 unsigned reg, 813 unsigned char dst_vol_left, 814 unsigned char dst_vol_right, 815 int chan_sel, int delay 816 ) 817 { 818 unsigned long portbase = chip->mixer_io + reg; 819 unsigned char curr_vol_left = 0, curr_vol_right = 0; 820 int left_change = 0, right_change = 0; 821 822 if (chan_sel & SET_CHAN_LEFT) { 823 curr_vol_left = inb(portbase + 1); 824 825 /* take care of muting flag contained in left channel */ 826 if (curr_vol_left & AZF_MUTE_BIT) 827 dst_vol_left |= AZF_MUTE_BIT; 828 else 829 dst_vol_left &= ~AZF_MUTE_BIT; 830 831 left_change = (curr_vol_left > dst_vol_left) ? -1 : 1; 832 } 833 834 if (chan_sel & SET_CHAN_RIGHT) { 835 curr_vol_right = inb(portbase + 0); 836 837 right_change = (curr_vol_right > dst_vol_right) ? -1 : 1; 838 } 839 840 do { 841 if (left_change) { 842 if (curr_vol_left != dst_vol_left) { 843 curr_vol_left += left_change; 844 outb(curr_vol_left, portbase + 1); 845 } else 846 left_change = 0; 847 } 848 if (right_change) { 849 if (curr_vol_right != dst_vol_right) { 850 curr_vol_right += right_change; 851 852 /* during volume change, the right channel is crackling 853 * somewhat more than the left channel, unfortunately. 854 * This seems to be a hardware issue. */ 855 outb(curr_vol_right, portbase + 0); 856 } else 857 right_change = 0; 858 } 859 if (delay) 860 mdelay(delay); 861 } while ((left_change) || (right_change)); 862 } 863 864 /* 865 * general mixer element 866 */ 867 struct azf3328_mixer_reg { 868 unsigned reg; 869 unsigned int lchan_shift, rchan_shift; 870 unsigned int mask; 871 unsigned int invert: 1; 872 unsigned int stereo: 1; 873 unsigned int enum_c: 4; 874 }; 875 876 #define COMPOSE_MIXER_REG(reg,lchan_shift,rchan_shift,mask,invert,stereo,enum_c) \ 877 ((reg) | (lchan_shift << 8) | (rchan_shift << 12) | \ 878 (mask << 16) | \ 879 (invert << 24) | \ 880 (stereo << 25) | \ 881 (enum_c << 26)) 882 883 static void snd_azf3328_mixer_reg_decode(struct azf3328_mixer_reg *r, unsigned long val) 884 { 885 r->reg = val & 0xff; 886 r->lchan_shift = (val >> 8) & 0x0f; 887 r->rchan_shift = (val >> 12) & 0x0f; 888 r->mask = (val >> 16) & 0xff; 889 r->invert = (val >> 24) & 1; 890 r->stereo = (val >> 25) & 1; 891 r->enum_c = (val >> 26) & 0x0f; 892 } 893 894 /* 895 * mixer switches/volumes 896 */ 897 898 #define AZF3328_MIXER_SWITCH(xname, reg, shift, invert) \ 899 { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \ 900 .info = snd_azf3328_info_mixer, \ 901 .get = snd_azf3328_get_mixer, .put = snd_azf3328_put_mixer, \ 902 .private_value = COMPOSE_MIXER_REG(reg, shift, 0, 0x1, invert, 0, 0), \ 903 } 904 905 #define AZF3328_MIXER_VOL_STEREO(xname, reg, mask, invert) \ 906 { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \ 907 .info = snd_azf3328_info_mixer, \ 908 .get = snd_azf3328_get_mixer, .put = snd_azf3328_put_mixer, \ 909 .private_value = COMPOSE_MIXER_REG(reg, 8, 0, mask, invert, 1, 0), \ 910 } 911 912 #define AZF3328_MIXER_VOL_MONO(xname, reg, mask, is_right_chan) \ 913 { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \ 914 .info = snd_azf3328_info_mixer, \ 915 .get = snd_azf3328_get_mixer, .put = snd_azf3328_put_mixer, \ 916 .private_value = COMPOSE_MIXER_REG(reg, is_right_chan ? 0 : 8, 0, mask, 1, 0, 0), \ 917 } 918 919 #define AZF3328_MIXER_VOL_SPECIAL(xname, reg, mask, shift, invert) \ 920 { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \ 921 .info = snd_azf3328_info_mixer, \ 922 .get = snd_azf3328_get_mixer, .put = snd_azf3328_put_mixer, \ 923 .private_value = COMPOSE_MIXER_REG(reg, shift, 0, mask, invert, 0, 0), \ 924 } 925 926 #define AZF3328_MIXER_ENUM(xname, reg, enum_c, shift) \ 927 { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \ 928 .info = snd_azf3328_info_mixer_enum, \ 929 .get = snd_azf3328_get_mixer_enum, .put = snd_azf3328_put_mixer_enum, \ 930 .private_value = COMPOSE_MIXER_REG(reg, shift, 0, 0, 0, 0, enum_c), \ 931 } 932 933 static int 934 snd_azf3328_info_mixer(struct snd_kcontrol *kcontrol, 935 struct snd_ctl_elem_info *uinfo) 936 { 937 struct azf3328_mixer_reg reg; 938 939 snd_azf3328_mixer_reg_decode(®, kcontrol->private_value); 940 uinfo->type = reg.mask == 1 ? 941 SNDRV_CTL_ELEM_TYPE_BOOLEAN : SNDRV_CTL_ELEM_TYPE_INTEGER; 942 uinfo->count = reg.stereo + 1; 943 uinfo->value.integer.min = 0; 944 uinfo->value.integer.max = reg.mask; 945 return 0; 946 } 947 948 static int 949 snd_azf3328_get_mixer(struct snd_kcontrol *kcontrol, 950 struct snd_ctl_elem_value *ucontrol) 951 { 952 struct snd_azf3328 *chip = snd_kcontrol_chip(kcontrol); 953 struct azf3328_mixer_reg reg; 954 u16 oreg, val; 955 956 snd_azf3328_mixer_reg_decode(®, kcontrol->private_value); 957 958 oreg = snd_azf3328_mixer_inw(chip, reg.reg); 959 val = (oreg >> reg.lchan_shift) & reg.mask; 960 if (reg.invert) 961 val = reg.mask - val; 962 ucontrol->value.integer.value[0] = val; 963 if (reg.stereo) { 964 val = (oreg >> reg.rchan_shift) & reg.mask; 965 if (reg.invert) 966 val = reg.mask - val; 967 ucontrol->value.integer.value[1] = val; 968 } 969 dev_dbg(chip->card->dev, 970 "get: %02x is %04x -> vol %02lx|%02lx (shift %02d|%02d, mask %02x, inv. %d, stereo %d)\n", 971 reg.reg, oreg, 972 ucontrol->value.integer.value[0], ucontrol->value.integer.value[1], 973 reg.lchan_shift, reg.rchan_shift, reg.mask, reg.invert, reg.stereo); 974 return 0; 975 } 976 977 static int 978 snd_azf3328_put_mixer(struct snd_kcontrol *kcontrol, 979 struct snd_ctl_elem_value *ucontrol) 980 { 981 struct snd_azf3328 *chip = snd_kcontrol_chip(kcontrol); 982 struct azf3328_mixer_reg reg; 983 u16 oreg, nreg, val; 984 985 snd_azf3328_mixer_reg_decode(®, kcontrol->private_value); 986 oreg = snd_azf3328_mixer_inw(chip, reg.reg); 987 val = ucontrol->value.integer.value[0] & reg.mask; 988 if (reg.invert) 989 val = reg.mask - val; 990 nreg = oreg & ~(reg.mask << reg.lchan_shift); 991 nreg |= (val << reg.lchan_shift); 992 if (reg.stereo) { 993 val = ucontrol->value.integer.value[1] & reg.mask; 994 if (reg.invert) 995 val = reg.mask - val; 996 nreg &= ~(reg.mask << reg.rchan_shift); 997 nreg |= (val << reg.rchan_shift); 998 } 999 if (reg.mask >= 0x07) /* it's a volume control, so better take care */ 1000 snd_azf3328_mixer_write_volume_gradually( 1001 chip, reg.reg, nreg >> 8, nreg & 0xff, 1002 /* just set both channels, doesn't matter */ 1003 SET_CHAN_LEFT|SET_CHAN_RIGHT, 1004 0); 1005 else 1006 snd_azf3328_mixer_outw(chip, reg.reg, nreg); 1007 1008 dev_dbg(chip->card->dev, 1009 "put: %02x to %02lx|%02lx, oreg %04x; shift %02d|%02d -> nreg %04x; after: %04x\n", 1010 reg.reg, ucontrol->value.integer.value[0], ucontrol->value.integer.value[1], 1011 oreg, reg.lchan_shift, reg.rchan_shift, 1012 nreg, snd_azf3328_mixer_inw(chip, reg.reg)); 1013 return (nreg != oreg); 1014 } 1015 1016 static int 1017 snd_azf3328_info_mixer_enum(struct snd_kcontrol *kcontrol, 1018 struct snd_ctl_elem_info *uinfo) 1019 { 1020 static const char * const texts1[] = { 1021 "Mic1", "Mic2" 1022 }; 1023 static const char * const texts2[] = { 1024 "Mix", "Mic" 1025 }; 1026 static const char * const texts3[] = { 1027 "Mic", "CD", "Video", "Aux", 1028 "Line", "Mix", "Mix Mono", "Phone" 1029 }; 1030 static const char * const texts4[] = { 1031 "pre 3D", "post 3D" 1032 }; 1033 struct azf3328_mixer_reg reg; 1034 const char * const *p = NULL; 1035 1036 snd_azf3328_mixer_reg_decode(®, kcontrol->private_value); 1037 uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED; 1038 uinfo->count = (reg.reg == IDX_MIXER_REC_SELECT) ? 2 : 1; 1039 uinfo->value.enumerated.items = reg.enum_c; 1040 if (uinfo->value.enumerated.item > reg.enum_c - 1U) 1041 uinfo->value.enumerated.item = reg.enum_c - 1U; 1042 if (reg.reg == IDX_MIXER_ADVCTL2) { 1043 switch(reg.lchan_shift) { 1044 case 8: /* modem out sel */ 1045 p = texts1; 1046 break; 1047 case 9: /* mono sel source */ 1048 p = texts2; 1049 break; 1050 case 15: /* PCM Out Path */ 1051 p = texts4; 1052 break; 1053 } 1054 } else 1055 if (reg.reg == IDX_MIXER_REC_SELECT) 1056 p = texts3; 1057 1058 strcpy(uinfo->value.enumerated.name, p[uinfo->value.enumerated.item]); 1059 return 0; 1060 } 1061 1062 static int 1063 snd_azf3328_get_mixer_enum(struct snd_kcontrol *kcontrol, 1064 struct snd_ctl_elem_value *ucontrol) 1065 { 1066 struct snd_azf3328 *chip = snd_kcontrol_chip(kcontrol); 1067 struct azf3328_mixer_reg reg; 1068 unsigned short val; 1069 1070 snd_azf3328_mixer_reg_decode(®, kcontrol->private_value); 1071 val = snd_azf3328_mixer_inw(chip, reg.reg); 1072 if (reg.reg == IDX_MIXER_REC_SELECT) { 1073 ucontrol->value.enumerated.item[0] = (val >> 8) & (reg.enum_c - 1); 1074 ucontrol->value.enumerated.item[1] = (val >> 0) & (reg.enum_c - 1); 1075 } else 1076 ucontrol->value.enumerated.item[0] = (val >> reg.lchan_shift) & (reg.enum_c - 1); 1077 1078 dev_dbg(chip->card->dev, 1079 "get_enum: %02x is %04x -> %d|%d (shift %02d, enum_c %d)\n", 1080 reg.reg, val, ucontrol->value.enumerated.item[0], ucontrol->value.enumerated.item[1], 1081 reg.lchan_shift, reg.enum_c); 1082 return 0; 1083 } 1084 1085 static int 1086 snd_azf3328_put_mixer_enum(struct snd_kcontrol *kcontrol, 1087 struct snd_ctl_elem_value *ucontrol) 1088 { 1089 struct snd_azf3328 *chip = snd_kcontrol_chip(kcontrol); 1090 struct azf3328_mixer_reg reg; 1091 u16 oreg, nreg, val; 1092 1093 snd_azf3328_mixer_reg_decode(®, kcontrol->private_value); 1094 oreg = snd_azf3328_mixer_inw(chip, reg.reg); 1095 val = oreg; 1096 if (reg.reg == IDX_MIXER_REC_SELECT) { 1097 if (ucontrol->value.enumerated.item[0] > reg.enum_c - 1U || 1098 ucontrol->value.enumerated.item[1] > reg.enum_c - 1U) 1099 return -EINVAL; 1100 val = (ucontrol->value.enumerated.item[0] << 8) | 1101 (ucontrol->value.enumerated.item[1] << 0); 1102 } else { 1103 if (ucontrol->value.enumerated.item[0] > reg.enum_c - 1U) 1104 return -EINVAL; 1105 val &= ~((reg.enum_c - 1) << reg.lchan_shift); 1106 val |= (ucontrol->value.enumerated.item[0] << reg.lchan_shift); 1107 } 1108 snd_azf3328_mixer_outw(chip, reg.reg, val); 1109 nreg = val; 1110 1111 dev_dbg(chip->card->dev, 1112 "put_enum: %02x to %04x, oreg %04x\n", reg.reg, val, oreg); 1113 return (nreg != oreg); 1114 } 1115 1116 static struct snd_kcontrol_new snd_azf3328_mixer_controls[] = { 1117 AZF3328_MIXER_SWITCH("Master Playback Switch", IDX_MIXER_PLAY_MASTER, 15, 1), 1118 AZF3328_MIXER_VOL_STEREO("Master Playback Volume", IDX_MIXER_PLAY_MASTER, 0x1f, 1), 1119 AZF3328_MIXER_SWITCH("PCM Playback Switch", IDX_MIXER_WAVEOUT, 15, 1), 1120 AZF3328_MIXER_VOL_STEREO("PCM Playback Volume", 1121 IDX_MIXER_WAVEOUT, 0x1f, 1), 1122 AZF3328_MIXER_SWITCH("PCM 3D Bypass Playback Switch", 1123 IDX_MIXER_ADVCTL2, 7, 1), 1124 AZF3328_MIXER_SWITCH("FM Playback Switch", IDX_MIXER_FMSYNTH, 15, 1), 1125 AZF3328_MIXER_VOL_STEREO("FM Playback Volume", IDX_MIXER_FMSYNTH, 0x1f, 1), 1126 AZF3328_MIXER_SWITCH("CD Playback Switch", IDX_MIXER_CDAUDIO, 15, 1), 1127 AZF3328_MIXER_VOL_STEREO("CD Playback Volume", IDX_MIXER_CDAUDIO, 0x1f, 1), 1128 AZF3328_MIXER_SWITCH("Capture Switch", IDX_MIXER_REC_VOLUME, 15, 1), 1129 AZF3328_MIXER_VOL_STEREO("Capture Volume", IDX_MIXER_REC_VOLUME, 0x0f, 0), 1130 AZF3328_MIXER_ENUM("Capture Source", IDX_MIXER_REC_SELECT, 8, 0), 1131 AZF3328_MIXER_SWITCH("Mic Playback Switch", IDX_MIXER_MIC, 15, 1), 1132 AZF3328_MIXER_VOL_MONO("Mic Playback Volume", IDX_MIXER_MIC, 0x1f, 1), 1133 AZF3328_MIXER_SWITCH("Mic Boost (+20dB)", IDX_MIXER_MIC, 6, 0), 1134 AZF3328_MIXER_SWITCH("Line Playback Switch", IDX_MIXER_LINEIN, 15, 1), 1135 AZF3328_MIXER_VOL_STEREO("Line Playback Volume", IDX_MIXER_LINEIN, 0x1f, 1), 1136 AZF3328_MIXER_SWITCH("Beep Playback Switch", IDX_MIXER_PCBEEP, 15, 1), 1137 AZF3328_MIXER_VOL_SPECIAL("Beep Playback Volume", IDX_MIXER_PCBEEP, 0x0f, 1, 1), 1138 AZF3328_MIXER_SWITCH("Video Playback Switch", IDX_MIXER_VIDEO, 15, 1), 1139 AZF3328_MIXER_VOL_STEREO("Video Playback Volume", IDX_MIXER_VIDEO, 0x1f, 1), 1140 AZF3328_MIXER_SWITCH("Aux Playback Switch", IDX_MIXER_AUX, 15, 1), 1141 AZF3328_MIXER_VOL_STEREO("Aux Playback Volume", IDX_MIXER_AUX, 0x1f, 1), 1142 AZF3328_MIXER_SWITCH("Modem Playback Switch", IDX_MIXER_MODEMOUT, 15, 1), 1143 AZF3328_MIXER_VOL_MONO("Modem Playback Volume", IDX_MIXER_MODEMOUT, 0x1f, 1), 1144 AZF3328_MIXER_SWITCH("Modem Capture Switch", IDX_MIXER_MODEMIN, 15, 1), 1145 AZF3328_MIXER_VOL_MONO("Modem Capture Volume", IDX_MIXER_MODEMIN, 0x1f, 1), 1146 AZF3328_MIXER_ENUM("Mic Select", IDX_MIXER_ADVCTL2, 2, 8), 1147 AZF3328_MIXER_ENUM("Mono Output Select", IDX_MIXER_ADVCTL2, 2, 9), 1148 AZF3328_MIXER_ENUM("PCM Output Route", IDX_MIXER_ADVCTL2, 2, 15), /* PCM Out Path, place in front since it controls *both* 3D and Bass/Treble! */ 1149 AZF3328_MIXER_VOL_SPECIAL("Tone Control - Treble", IDX_MIXER_BASSTREBLE, 0x07, 1, 0), 1150 AZF3328_MIXER_VOL_SPECIAL("Tone Control - Bass", IDX_MIXER_BASSTREBLE, 0x07, 9, 0), 1151 AZF3328_MIXER_SWITCH("3D Control - Switch", IDX_MIXER_ADVCTL2, 13, 0), 1152 AZF3328_MIXER_VOL_SPECIAL("3D Control - Width", IDX_MIXER_ADVCTL1, 0x07, 1, 0), /* "3D Width" */ 1153 AZF3328_MIXER_VOL_SPECIAL("3D Control - Depth", IDX_MIXER_ADVCTL1, 0x03, 8, 0), /* "Hifi 3D" */ 1154 #if MIXER_TESTING 1155 AZF3328_MIXER_SWITCH("0", IDX_MIXER_ADVCTL2, 0, 0), 1156 AZF3328_MIXER_SWITCH("1", IDX_MIXER_ADVCTL2, 1, 0), 1157 AZF3328_MIXER_SWITCH("2", IDX_MIXER_ADVCTL2, 2, 0), 1158 AZF3328_MIXER_SWITCH("3", IDX_MIXER_ADVCTL2, 3, 0), 1159 AZF3328_MIXER_SWITCH("4", IDX_MIXER_ADVCTL2, 4, 0), 1160 AZF3328_MIXER_SWITCH("5", IDX_MIXER_ADVCTL2, 5, 0), 1161 AZF3328_MIXER_SWITCH("6", IDX_MIXER_ADVCTL2, 6, 0), 1162 AZF3328_MIXER_SWITCH("7", IDX_MIXER_ADVCTL2, 7, 0), 1163 AZF3328_MIXER_SWITCH("8", IDX_MIXER_ADVCTL2, 8, 0), 1164 AZF3328_MIXER_SWITCH("9", IDX_MIXER_ADVCTL2, 9, 0), 1165 AZF3328_MIXER_SWITCH("10", IDX_MIXER_ADVCTL2, 10, 0), 1166 AZF3328_MIXER_SWITCH("11", IDX_MIXER_ADVCTL2, 11, 0), 1167 AZF3328_MIXER_SWITCH("12", IDX_MIXER_ADVCTL2, 12, 0), 1168 AZF3328_MIXER_SWITCH("13", IDX_MIXER_ADVCTL2, 13, 0), 1169 AZF3328_MIXER_SWITCH("14", IDX_MIXER_ADVCTL2, 14, 0), 1170 AZF3328_MIXER_SWITCH("15", IDX_MIXER_ADVCTL2, 15, 0), 1171 #endif 1172 }; 1173 1174 static u16 snd_azf3328_init_values[][2] = { 1175 { IDX_MIXER_PLAY_MASTER, MIXER_MUTE_MASK|0x1f1f }, 1176 { IDX_MIXER_MODEMOUT, MIXER_MUTE_MASK|0x1f1f }, 1177 { IDX_MIXER_BASSTREBLE, 0x0000 }, 1178 { IDX_MIXER_PCBEEP, MIXER_MUTE_MASK|0x1f1f }, 1179 { IDX_MIXER_MODEMIN, MIXER_MUTE_MASK|0x1f1f }, 1180 { IDX_MIXER_MIC, MIXER_MUTE_MASK|0x001f }, 1181 { IDX_MIXER_LINEIN, MIXER_MUTE_MASK|0x1f1f }, 1182 { IDX_MIXER_CDAUDIO, MIXER_MUTE_MASK|0x1f1f }, 1183 { IDX_MIXER_VIDEO, MIXER_MUTE_MASK|0x1f1f }, 1184 { IDX_MIXER_AUX, MIXER_MUTE_MASK|0x1f1f }, 1185 { IDX_MIXER_WAVEOUT, MIXER_MUTE_MASK|0x1f1f }, 1186 { IDX_MIXER_FMSYNTH, MIXER_MUTE_MASK|0x1f1f }, 1187 { IDX_MIXER_REC_VOLUME, MIXER_MUTE_MASK|0x0707 }, 1188 }; 1189 1190 static int 1191 snd_azf3328_mixer_new(struct snd_azf3328 *chip) 1192 { 1193 struct snd_card *card; 1194 const struct snd_kcontrol_new *sw; 1195 unsigned int idx; 1196 int err; 1197 1198 if (snd_BUG_ON(!chip || !chip->card)) 1199 return -EINVAL; 1200 1201 card = chip->card; 1202 1203 /* mixer reset */ 1204 snd_azf3328_mixer_outw(chip, IDX_MIXER_RESET, 0x0000); 1205 1206 /* mute and zero volume channels */ 1207 for (idx = 0; idx < ARRAY_SIZE(snd_azf3328_init_values); ++idx) { 1208 snd_azf3328_mixer_outw(chip, 1209 snd_azf3328_init_values[idx][0], 1210 snd_azf3328_init_values[idx][1]); 1211 } 1212 1213 /* add mixer controls */ 1214 sw = snd_azf3328_mixer_controls; 1215 for (idx = 0; idx < ARRAY_SIZE(snd_azf3328_mixer_controls); 1216 ++idx, ++sw) { 1217 if ((err = snd_ctl_add(chip->card, snd_ctl_new1(sw, chip))) < 0) 1218 return err; 1219 } 1220 snd_component_add(card, "AZF3328 mixer"); 1221 strcpy(card->mixername, "AZF3328 mixer"); 1222 1223 return 0; 1224 } 1225 #endif /* AZF_USE_AC97_LAYER */ 1226 1227 static int 1228 snd_azf3328_hw_params(struct snd_pcm_substream *substream, 1229 struct snd_pcm_hw_params *hw_params) 1230 { 1231 return snd_pcm_lib_malloc_pages(substream, params_buffer_bytes(hw_params)); 1232 } 1233 1234 static int 1235 snd_azf3328_hw_free(struct snd_pcm_substream *substream) 1236 { 1237 snd_pcm_lib_free_pages(substream); 1238 return 0; 1239 } 1240 1241 static void 1242 snd_azf3328_codec_setfmt(struct snd_azf3328_codec_data *codec, 1243 enum azf_freq_t bitrate, 1244 unsigned int format_width, 1245 unsigned int channels 1246 ) 1247 { 1248 unsigned long flags; 1249 u16 val = 0xff00; 1250 u8 freq = 0; 1251 1252 switch (bitrate) { 1253 case AZF_FREQ_4000: freq = SOUNDFORMAT_FREQ_SUSPECTED_4000; break; 1254 case AZF_FREQ_4800: freq = SOUNDFORMAT_FREQ_SUSPECTED_4800; break; 1255 case AZF_FREQ_5512: 1256 /* the AZF3328 names it "5510" for some strange reason */ 1257 freq = SOUNDFORMAT_FREQ_5510; break; 1258 case AZF_FREQ_6620: freq = SOUNDFORMAT_FREQ_6620; break; 1259 case AZF_FREQ_8000: freq = SOUNDFORMAT_FREQ_8000; break; 1260 case AZF_FREQ_9600: freq = SOUNDFORMAT_FREQ_9600; break; 1261 case AZF_FREQ_11025: freq = SOUNDFORMAT_FREQ_11025; break; 1262 case AZF_FREQ_13240: freq = SOUNDFORMAT_FREQ_SUSPECTED_13240; break; 1263 case AZF_FREQ_16000: freq = SOUNDFORMAT_FREQ_16000; break; 1264 case AZF_FREQ_22050: freq = SOUNDFORMAT_FREQ_22050; break; 1265 case AZF_FREQ_32000: freq = SOUNDFORMAT_FREQ_32000; break; 1266 default: 1267 snd_printk(KERN_WARNING "unknown bitrate %d, assuming 44.1kHz!\n", bitrate); 1268 /* fall-through */ 1269 case AZF_FREQ_44100: freq = SOUNDFORMAT_FREQ_44100; break; 1270 case AZF_FREQ_48000: freq = SOUNDFORMAT_FREQ_48000; break; 1271 case AZF_FREQ_66200: freq = SOUNDFORMAT_FREQ_SUSPECTED_66200; break; 1272 } 1273 /* val = 0xff07; 3m27.993s (65301Hz; -> 64000Hz???) hmm, 66120, 65967, 66123 */ 1274 /* val = 0xff09; 17m15.098s (13123,478Hz; -> 12000Hz???) hmm, 13237.2Hz? */ 1275 /* val = 0xff0a; 47m30.599s (4764,891Hz; -> 4800Hz???) yup, 4803Hz */ 1276 /* val = 0xff0c; 57m0.510s (4010,263Hz; -> 4000Hz???) yup, 4003Hz */ 1277 /* val = 0xff05; 5m11.556s (... -> 44100Hz) */ 1278 /* val = 0xff03; 10m21.529s (21872,463Hz; -> 22050Hz???) */ 1279 /* val = 0xff0f; 20m41.883s (10937,993Hz; -> 11025Hz???) */ 1280 /* val = 0xff0d; 41m23.135s (5523,600Hz; -> 5512Hz???) */ 1281 /* val = 0xff0e; 28m30.777s (8017Hz; -> 8000Hz???) */ 1282 1283 val |= freq; 1284 1285 if (channels == 2) 1286 val |= SOUNDFORMAT_FLAG_2CHANNELS; 1287 1288 if (format_width == 16) 1289 val |= SOUNDFORMAT_FLAG_16BIT; 1290 1291 spin_lock_irqsave(codec->lock, flags); 1292 1293 /* set bitrate/format */ 1294 snd_azf3328_codec_outw(codec, IDX_IO_CODEC_SOUNDFORMAT, val); 1295 1296 /* changing the bitrate/format settings switches off the 1297 * audio output with an annoying click in case of 8/16bit format change 1298 * (maybe shutting down DAC/ADC?), thus immediately 1299 * do some tweaking to reenable it and get rid of the clicking 1300 * (FIXME: yes, it works, but what exactly am I doing here?? :) 1301 * FIXME: does this have some side effects for full-duplex 1302 * or other dramatic side effects? */ 1303 /* do it for non-capture codecs only */ 1304 if (codec->type != AZF_CODEC_CAPTURE) 1305 snd_azf3328_codec_outw(codec, IDX_IO_CODEC_DMA_FLAGS, 1306 snd_azf3328_codec_inw(codec, IDX_IO_CODEC_DMA_FLAGS) | 1307 DMA_RUN_SOMETHING1 | 1308 DMA_RUN_SOMETHING2 | 1309 SOMETHING_ALMOST_ALWAYS_SET | 1310 DMA_EPILOGUE_SOMETHING | 1311 DMA_SOMETHING_ELSE 1312 ); 1313 1314 spin_unlock_irqrestore(codec->lock, flags); 1315 } 1316 1317 static inline void 1318 snd_azf3328_codec_setfmt_lowpower(struct snd_azf3328_codec_data *codec 1319 ) 1320 { 1321 /* choose lowest frequency for low power consumption. 1322 * While this will cause louder noise due to rather coarse frequency, 1323 * it should never matter since output should always 1324 * get disabled properly when idle anyway. */ 1325 snd_azf3328_codec_setfmt(codec, AZF_FREQ_4000, 8, 1); 1326 } 1327 1328 static void 1329 snd_azf3328_ctrl_reg_6AH_update(struct snd_azf3328 *chip, 1330 unsigned bitmask, 1331 bool enable 1332 ) 1333 { 1334 bool do_mask = !enable; 1335 if (do_mask) 1336 chip->shadow_reg_ctrl_6AH |= bitmask; 1337 else 1338 chip->shadow_reg_ctrl_6AH &= ~bitmask; 1339 dev_dbg(chip->card->dev, 1340 "6AH_update mask 0x%04x do_mask %d: val 0x%04x\n", 1341 bitmask, do_mask, chip->shadow_reg_ctrl_6AH); 1342 snd_azf3328_ctrl_outw(chip, IDX_IO_6AH, chip->shadow_reg_ctrl_6AH); 1343 } 1344 1345 static inline void 1346 snd_azf3328_ctrl_enable_codecs(struct snd_azf3328 *chip, bool enable) 1347 { 1348 dev_dbg(chip->card->dev, "codec_enable %d\n", enable); 1349 /* no idea what exactly is being done here, but I strongly assume it's 1350 * PM related */ 1351 snd_azf3328_ctrl_reg_6AH_update( 1352 chip, IO_6A_PAUSE_PLAYBACK_BIT8, enable 1353 ); 1354 } 1355 1356 static void 1357 snd_azf3328_ctrl_codec_activity(struct snd_azf3328 *chip, 1358 enum snd_azf3328_codec_type codec_type, 1359 bool enable 1360 ) 1361 { 1362 struct snd_azf3328_codec_data *codec = &chip->codecs[codec_type]; 1363 bool need_change = (codec->running != enable); 1364 1365 dev_dbg(chip->card->dev, 1366 "codec_activity: %s codec, enable %d, need_change %d\n", 1367 codec->name, enable, need_change 1368 ); 1369 if (need_change) { 1370 static const struct { 1371 enum snd_azf3328_codec_type other1; 1372 enum snd_azf3328_codec_type other2; 1373 } peer_codecs[3] = 1374 { { AZF_CODEC_CAPTURE, AZF_CODEC_I2S_OUT }, 1375 { AZF_CODEC_PLAYBACK, AZF_CODEC_I2S_OUT }, 1376 { AZF_CODEC_PLAYBACK, AZF_CODEC_CAPTURE } }; 1377 bool call_function; 1378 1379 if (enable) 1380 /* if enable codec, call enable_codecs func 1381 to enable codec supply... */ 1382 call_function = 1; 1383 else { 1384 /* ...otherwise call enable_codecs func 1385 (which globally shuts down operation of codecs) 1386 only in case the other codecs are currently 1387 not active either! */ 1388 call_function = 1389 ((!chip->codecs[peer_codecs[codec_type].other1] 1390 .running) 1391 && (!chip->codecs[peer_codecs[codec_type].other2] 1392 .running)); 1393 } 1394 if (call_function) 1395 snd_azf3328_ctrl_enable_codecs(chip, enable); 1396 1397 /* ...and adjust clock, too 1398 * (reduce noise and power consumption) */ 1399 if (!enable) 1400 snd_azf3328_codec_setfmt_lowpower(codec); 1401 codec->running = enable; 1402 } 1403 } 1404 1405 static void 1406 snd_azf3328_codec_setdmaa(struct snd_azf3328 *chip, 1407 struct snd_azf3328_codec_data *codec, 1408 unsigned long addr, 1409 unsigned int period_bytes, 1410 unsigned int buffer_bytes 1411 ) 1412 { 1413 WARN_ONCE(period_bytes & 1, "odd period length!?\n"); 1414 WARN_ONCE(buffer_bytes != 2 * period_bytes, 1415 "missed our input expectations! %u vs. %u\n", 1416 buffer_bytes, period_bytes); 1417 if (!codec->running) { 1418 /* AZF3328 uses a two buffer pointer DMA transfer approach */ 1419 1420 unsigned long flags; 1421 1422 /* width 32bit (prevent overflow): */ 1423 u32 area_length; 1424 struct codec_setup_io { 1425 u32 dma_start_1; 1426 u32 dma_start_2; 1427 u32 dma_lengths; 1428 } __attribute__((packed)) setup_io; 1429 1430 area_length = buffer_bytes/2; 1431 1432 setup_io.dma_start_1 = addr; 1433 setup_io.dma_start_2 = addr+area_length; 1434 1435 dev_dbg(chip->card->dev, 1436 "setdma: buffers %08x[%u] / %08x[%u], %u, %u\n", 1437 setup_io.dma_start_1, area_length, 1438 setup_io.dma_start_2, area_length, 1439 period_bytes, buffer_bytes); 1440 1441 /* Hmm, are we really supposed to decrement this by 1?? 1442 Most definitely certainly not: configuring full length does 1443 work properly (i.e. likely better), and BTW we 1444 violated possibly differing frame sizes with this... 1445 1446 area_length--; |* max. index *| 1447 */ 1448 1449 /* build combined I/O buffer length word */ 1450 setup_io.dma_lengths = (area_length << 16) | (area_length); 1451 1452 spin_lock_irqsave(codec->lock, flags); 1453 snd_azf3328_codec_outl_multi( 1454 codec, IDX_IO_CODEC_DMA_START_1, &setup_io, 3 1455 ); 1456 spin_unlock_irqrestore(codec->lock, flags); 1457 } 1458 } 1459 1460 static int 1461 snd_azf3328_pcm_prepare(struct snd_pcm_substream *substream) 1462 { 1463 struct snd_pcm_runtime *runtime = substream->runtime; 1464 struct snd_azf3328_codec_data *codec = runtime->private_data; 1465 #if 0 1466 unsigned int size = snd_pcm_lib_buffer_bytes(substream); 1467 unsigned int count = snd_pcm_lib_period_bytes(substream); 1468 #endif 1469 1470 codec->dma_base = runtime->dma_addr; 1471 1472 #if 0 1473 snd_azf3328_codec_setfmt(codec, 1474 runtime->rate, 1475 snd_pcm_format_width(runtime->format), 1476 runtime->channels); 1477 snd_azf3328_codec_setdmaa(chip, codec, 1478 runtime->dma_addr, count, size); 1479 #endif 1480 return 0; 1481 } 1482 1483 static int 1484 snd_azf3328_pcm_trigger(struct snd_pcm_substream *substream, int cmd) 1485 { 1486 struct snd_azf3328 *chip = snd_pcm_substream_chip(substream); 1487 struct snd_pcm_runtime *runtime = substream->runtime; 1488 struct snd_azf3328_codec_data *codec = runtime->private_data; 1489 int result = 0; 1490 u16 flags1; 1491 bool previously_muted = false; 1492 bool is_main_mixer_playback_codec = (AZF_CODEC_PLAYBACK == codec->type); 1493 1494 switch (cmd) { 1495 case SNDRV_PCM_TRIGGER_START: 1496 dev_dbg(chip->card->dev, "START PCM %s\n", codec->name); 1497 1498 if (is_main_mixer_playback_codec) { 1499 /* mute WaveOut (avoid clicking during setup) */ 1500 previously_muted = 1501 snd_azf3328_mixer_mute_control_pcm( 1502 chip, 1 1503 ); 1504 } 1505 1506 snd_azf3328_codec_setfmt(codec, 1507 runtime->rate, 1508 snd_pcm_format_width(runtime->format), 1509 runtime->channels); 1510 1511 spin_lock(codec->lock); 1512 /* first, remember current value: */ 1513 flags1 = snd_azf3328_codec_inw(codec, IDX_IO_CODEC_DMA_FLAGS); 1514 1515 /* stop transfer */ 1516 flags1 &= ~DMA_RESUME; 1517 snd_azf3328_codec_outw(codec, IDX_IO_CODEC_DMA_FLAGS, flags1); 1518 1519 /* FIXME: clear interrupts or what??? */ 1520 snd_azf3328_codec_outw(codec, IDX_IO_CODEC_IRQTYPE, 0xffff); 1521 spin_unlock(codec->lock); 1522 1523 snd_azf3328_codec_setdmaa(chip, codec, runtime->dma_addr, 1524 snd_pcm_lib_period_bytes(substream), 1525 snd_pcm_lib_buffer_bytes(substream) 1526 ); 1527 1528 spin_lock(codec->lock); 1529 #ifdef WIN9X 1530 /* FIXME: enable playback/recording??? */ 1531 flags1 |= DMA_RUN_SOMETHING1 | DMA_RUN_SOMETHING2; 1532 snd_azf3328_codec_outw(codec, IDX_IO_CODEC_DMA_FLAGS, flags1); 1533 1534 /* start transfer again */ 1535 /* FIXME: what is this value (0x0010)??? */ 1536 flags1 |= DMA_RESUME | DMA_EPILOGUE_SOMETHING; 1537 snd_azf3328_codec_outw(codec, IDX_IO_CODEC_DMA_FLAGS, flags1); 1538 #else /* NT4 */ 1539 snd_azf3328_codec_outw(codec, IDX_IO_CODEC_DMA_FLAGS, 1540 0x0000); 1541 snd_azf3328_codec_outw(codec, IDX_IO_CODEC_DMA_FLAGS, 1542 DMA_RUN_SOMETHING1); 1543 snd_azf3328_codec_outw(codec, IDX_IO_CODEC_DMA_FLAGS, 1544 DMA_RUN_SOMETHING1 | 1545 DMA_RUN_SOMETHING2); 1546 snd_azf3328_codec_outw(codec, IDX_IO_CODEC_DMA_FLAGS, 1547 DMA_RESUME | 1548 SOMETHING_ALMOST_ALWAYS_SET | 1549 DMA_EPILOGUE_SOMETHING | 1550 DMA_SOMETHING_ELSE); 1551 #endif 1552 spin_unlock(codec->lock); 1553 snd_azf3328_ctrl_codec_activity(chip, codec->type, 1); 1554 1555 if (is_main_mixer_playback_codec) { 1556 /* now unmute WaveOut */ 1557 if (!previously_muted) 1558 snd_azf3328_mixer_mute_control_pcm( 1559 chip, 0 1560 ); 1561 } 1562 1563 dev_dbg(chip->card->dev, "PCM STARTED %s\n", codec->name); 1564 break; 1565 case SNDRV_PCM_TRIGGER_RESUME: 1566 dev_dbg(chip->card->dev, "PCM RESUME %s\n", codec->name); 1567 /* resume codec if we were active */ 1568 spin_lock(codec->lock); 1569 if (codec->running) 1570 snd_azf3328_codec_outw(codec, IDX_IO_CODEC_DMA_FLAGS, 1571 snd_azf3328_codec_inw( 1572 codec, IDX_IO_CODEC_DMA_FLAGS 1573 ) | DMA_RESUME 1574 ); 1575 spin_unlock(codec->lock); 1576 break; 1577 case SNDRV_PCM_TRIGGER_STOP: 1578 dev_dbg(chip->card->dev, "PCM STOP %s\n", codec->name); 1579 1580 if (is_main_mixer_playback_codec) { 1581 /* mute WaveOut (avoid clicking during setup) */ 1582 previously_muted = 1583 snd_azf3328_mixer_mute_control_pcm( 1584 chip, 1 1585 ); 1586 } 1587 1588 spin_lock(codec->lock); 1589 /* first, remember current value: */ 1590 flags1 = snd_azf3328_codec_inw(codec, IDX_IO_CODEC_DMA_FLAGS); 1591 1592 /* stop transfer */ 1593 flags1 &= ~DMA_RESUME; 1594 snd_azf3328_codec_outw(codec, IDX_IO_CODEC_DMA_FLAGS, flags1); 1595 1596 /* hmm, is this really required? we're resetting the same bit 1597 * immediately thereafter... */ 1598 flags1 |= DMA_RUN_SOMETHING1; 1599 snd_azf3328_codec_outw(codec, IDX_IO_CODEC_DMA_FLAGS, flags1); 1600 1601 flags1 &= ~DMA_RUN_SOMETHING1; 1602 snd_azf3328_codec_outw(codec, IDX_IO_CODEC_DMA_FLAGS, flags1); 1603 spin_unlock(codec->lock); 1604 snd_azf3328_ctrl_codec_activity(chip, codec->type, 0); 1605 1606 if (is_main_mixer_playback_codec) { 1607 /* now unmute WaveOut */ 1608 if (!previously_muted) 1609 snd_azf3328_mixer_mute_control_pcm( 1610 chip, 0 1611 ); 1612 } 1613 1614 dev_dbg(chip->card->dev, "PCM STOPPED %s\n", codec->name); 1615 break; 1616 case SNDRV_PCM_TRIGGER_SUSPEND: 1617 dev_dbg(chip->card->dev, "PCM SUSPEND %s\n", codec->name); 1618 /* make sure codec is stopped */ 1619 snd_azf3328_codec_outw(codec, IDX_IO_CODEC_DMA_FLAGS, 1620 snd_azf3328_codec_inw( 1621 codec, IDX_IO_CODEC_DMA_FLAGS 1622 ) & ~DMA_RESUME 1623 ); 1624 break; 1625 case SNDRV_PCM_TRIGGER_PAUSE_PUSH: 1626 WARN(1, "FIXME: SNDRV_PCM_TRIGGER_PAUSE_PUSH NIY!\n"); 1627 break; 1628 case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: 1629 WARN(1, "FIXME: SNDRV_PCM_TRIGGER_PAUSE_RELEASE NIY!\n"); 1630 break; 1631 default: 1632 WARN(1, "FIXME: unknown trigger mode!\n"); 1633 return -EINVAL; 1634 } 1635 1636 return result; 1637 } 1638 1639 static snd_pcm_uframes_t 1640 snd_azf3328_pcm_pointer(struct snd_pcm_substream *substream 1641 ) 1642 { 1643 const struct snd_azf3328_codec_data *codec = 1644 substream->runtime->private_data; 1645 unsigned long result; 1646 snd_pcm_uframes_t frmres; 1647 1648 result = snd_azf3328_codec_inl(codec, IDX_IO_CODEC_DMA_CURRPOS); 1649 1650 /* calculate offset */ 1651 #ifdef QUERY_HARDWARE 1652 result -= snd_azf3328_codec_inl(codec, IDX_IO_CODEC_DMA_START_1); 1653 #else 1654 result -= codec->dma_base; 1655 #endif 1656 frmres = bytes_to_frames( substream->runtime, result); 1657 dev_dbg(substream->pcm->card->dev, "%08li %s @ 0x%8lx, frames %8ld\n", 1658 jiffies, codec->name, result, frmres); 1659 return frmres; 1660 } 1661 1662 /******************************************************************/ 1663 1664 #ifdef SUPPORT_GAMEPORT 1665 static inline void 1666 snd_azf3328_gameport_irq_enable(struct snd_azf3328 *chip, 1667 bool enable 1668 ) 1669 { 1670 snd_azf3328_io_reg_setb( 1671 chip->game_io+IDX_GAME_HWCONFIG, 1672 GAME_HWCFG_IRQ_ENABLE, 1673 enable 1674 ); 1675 } 1676 1677 static inline void 1678 snd_azf3328_gameport_legacy_address_enable(struct snd_azf3328 *chip, 1679 bool enable 1680 ) 1681 { 1682 snd_azf3328_io_reg_setb( 1683 chip->game_io+IDX_GAME_HWCONFIG, 1684 GAME_HWCFG_LEGACY_ADDRESS_ENABLE, 1685 enable 1686 ); 1687 } 1688 1689 static void 1690 snd_azf3328_gameport_set_counter_frequency(struct snd_azf3328 *chip, 1691 unsigned int freq_cfg 1692 ) 1693 { 1694 snd_azf3328_io_reg_setb( 1695 chip->game_io+IDX_GAME_HWCONFIG, 1696 0x02, 1697 (freq_cfg & 1) != 0 1698 ); 1699 snd_azf3328_io_reg_setb( 1700 chip->game_io+IDX_GAME_HWCONFIG, 1701 0x04, 1702 (freq_cfg & 2) != 0 1703 ); 1704 } 1705 1706 static inline void 1707 snd_azf3328_gameport_axis_circuit_enable(struct snd_azf3328 *chip, bool enable) 1708 { 1709 snd_azf3328_ctrl_reg_6AH_update( 1710 chip, IO_6A_SOMETHING2_GAMEPORT, enable 1711 ); 1712 } 1713 1714 static inline void 1715 snd_azf3328_gameport_interrupt(struct snd_azf3328 *chip) 1716 { 1717 /* 1718 * skeleton handler only 1719 * (we do not want axis reading in interrupt handler - too much load!) 1720 */ 1721 dev_dbg(chip->card->dev, "gameport irq\n"); 1722 1723 /* this should ACK the gameport IRQ properly, hopefully. */ 1724 snd_azf3328_game_inw(chip, IDX_GAME_AXIS_VALUE); 1725 } 1726 1727 static int 1728 snd_azf3328_gameport_open(struct gameport *gameport, int mode) 1729 { 1730 struct snd_azf3328 *chip = gameport_get_port_data(gameport); 1731 int res; 1732 1733 dev_dbg(chip->card->dev, "gameport_open, mode %d\n", mode); 1734 switch (mode) { 1735 case GAMEPORT_MODE_COOKED: 1736 case GAMEPORT_MODE_RAW: 1737 res = 0; 1738 break; 1739 default: 1740 res = -1; 1741 break; 1742 } 1743 1744 snd_azf3328_gameport_set_counter_frequency(chip, 1745 GAME_HWCFG_ADC_COUNTER_FREQ_STD); 1746 snd_azf3328_gameport_axis_circuit_enable(chip, (res == 0)); 1747 1748 return res; 1749 } 1750 1751 static void 1752 snd_azf3328_gameport_close(struct gameport *gameport) 1753 { 1754 struct snd_azf3328 *chip = gameport_get_port_data(gameport); 1755 1756 dev_dbg(chip->card->dev, "gameport_close\n"); 1757 snd_azf3328_gameport_set_counter_frequency(chip, 1758 GAME_HWCFG_ADC_COUNTER_FREQ_1_200); 1759 snd_azf3328_gameport_axis_circuit_enable(chip, 0); 1760 } 1761 1762 static int 1763 snd_azf3328_gameport_cooked_read(struct gameport *gameport, 1764 int *axes, 1765 int *buttons 1766 ) 1767 { 1768 struct snd_azf3328 *chip = gameport_get_port_data(gameport); 1769 int i; 1770 u8 val; 1771 unsigned long flags; 1772 1773 if (snd_BUG_ON(!chip)) 1774 return 0; 1775 1776 spin_lock_irqsave(&chip->reg_lock, flags); 1777 val = snd_azf3328_game_inb(chip, IDX_GAME_LEGACY_COMPATIBLE); 1778 *buttons = (~(val) >> 4) & 0xf; 1779 1780 /* ok, this one is a bit dirty: cooked_read is being polled by a timer, 1781 * thus we're atomic and cannot actively wait in here 1782 * (which would be useful for us since it probably would be better 1783 * to trigger a measurement in here, then wait a short amount of 1784 * time until it's finished, then read values of _this_ measurement). 1785 * 1786 * Thus we simply resort to reading values if they're available already 1787 * and trigger the next measurement. 1788 */ 1789 1790 val = snd_azf3328_game_inb(chip, IDX_GAME_AXES_CONFIG); 1791 if (val & GAME_AXES_SAMPLING_READY) { 1792 for (i = 0; i < ARRAY_SIZE(chip->axes); ++i) { 1793 /* configure the axis to read */ 1794 val = (i << 4) | 0x0f; 1795 snd_azf3328_game_outb(chip, IDX_GAME_AXES_CONFIG, val); 1796 1797 chip->axes[i] = snd_azf3328_game_inw( 1798 chip, IDX_GAME_AXIS_VALUE 1799 ); 1800 } 1801 } 1802 1803 /* trigger next sampling of axes, to be evaluated the next time we 1804 * enter this function */ 1805 1806 /* for some very, very strange reason we cannot enable 1807 * Measurement Ready monitoring for all axes here, 1808 * at least not when only one joystick connected */ 1809 val = 0x03; /* we're able to monitor axes 1 and 2 only */ 1810 snd_azf3328_game_outb(chip, IDX_GAME_AXES_CONFIG, val); 1811 1812 snd_azf3328_game_outw(chip, IDX_GAME_AXIS_VALUE, 0xffff); 1813 spin_unlock_irqrestore(&chip->reg_lock, flags); 1814 1815 for (i = 0; i < ARRAY_SIZE(chip->axes); i++) { 1816 axes[i] = chip->axes[i]; 1817 if (axes[i] == 0xffff) 1818 axes[i] = -1; 1819 } 1820 1821 dev_dbg(chip->card->dev, "cooked_read: axes %d %d %d %d buttons %d\n", 1822 axes[0], axes[1], axes[2], axes[3], *buttons); 1823 1824 return 0; 1825 } 1826 1827 static int 1828 snd_azf3328_gameport(struct snd_azf3328 *chip, int dev) 1829 { 1830 struct gameport *gp; 1831 1832 chip->gameport = gp = gameport_allocate_port(); 1833 if (!gp) { 1834 dev_err(chip->card->dev, "cannot alloc memory for gameport\n"); 1835 return -ENOMEM; 1836 } 1837 1838 gameport_set_name(gp, "AZF3328 Gameport"); 1839 gameport_set_phys(gp, "pci%s/gameport0", pci_name(chip->pci)); 1840 gameport_set_dev_parent(gp, &chip->pci->dev); 1841 gp->io = chip->game_io; 1842 gameport_set_port_data(gp, chip); 1843 1844 gp->open = snd_azf3328_gameport_open; 1845 gp->close = snd_azf3328_gameport_close; 1846 gp->fuzz = 16; /* seems ok */ 1847 gp->cooked_read = snd_azf3328_gameport_cooked_read; 1848 1849 /* DISABLE legacy address: we don't need it! */ 1850 snd_azf3328_gameport_legacy_address_enable(chip, 0); 1851 1852 snd_azf3328_gameport_set_counter_frequency(chip, 1853 GAME_HWCFG_ADC_COUNTER_FREQ_1_200); 1854 snd_azf3328_gameport_axis_circuit_enable(chip, 0); 1855 1856 gameport_register_port(chip->gameport); 1857 1858 return 0; 1859 } 1860 1861 static void 1862 snd_azf3328_gameport_free(struct snd_azf3328 *chip) 1863 { 1864 if (chip->gameport) { 1865 gameport_unregister_port(chip->gameport); 1866 chip->gameport = NULL; 1867 } 1868 snd_azf3328_gameport_irq_enable(chip, 0); 1869 } 1870 #else 1871 static inline int 1872 snd_azf3328_gameport(struct snd_azf3328 *chip, int dev) { return -ENOSYS; } 1873 static inline void 1874 snd_azf3328_gameport_free(struct snd_azf3328 *chip) { } 1875 static inline void 1876 snd_azf3328_gameport_interrupt(struct snd_azf3328 *chip) 1877 { 1878 dev_warn(chip->card->dev, "huh, game port IRQ occurred!?\n"); 1879 } 1880 #endif /* SUPPORT_GAMEPORT */ 1881 1882 /******************************************************************/ 1883 1884 static inline void 1885 snd_azf3328_irq_log_unknown_type(struct snd_azf3328 *chip, u8 which) 1886 { 1887 dev_dbg(chip->card->dev, 1888 "unknown IRQ type (%x) occurred, please report!\n", 1889 which); 1890 } 1891 1892 static inline void 1893 snd_azf3328_pcm_interrupt(struct snd_azf3328 *chip, 1894 const struct snd_azf3328_codec_data *first_codec, 1895 u8 status 1896 ) 1897 { 1898 u8 which; 1899 enum snd_azf3328_codec_type codec_type; 1900 const struct snd_azf3328_codec_data *codec = first_codec; 1901 1902 for (codec_type = AZF_CODEC_PLAYBACK; 1903 codec_type <= AZF_CODEC_I2S_OUT; 1904 ++codec_type, ++codec) { 1905 1906 /* skip codec if there's no interrupt for it */ 1907 if (!(status & (1 << codec_type))) 1908 continue; 1909 1910 spin_lock(codec->lock); 1911 which = snd_azf3328_codec_inb(codec, IDX_IO_CODEC_IRQTYPE); 1912 /* ack all IRQ types immediately */ 1913 snd_azf3328_codec_outb(codec, IDX_IO_CODEC_IRQTYPE, which); 1914 spin_unlock(codec->lock); 1915 1916 if (codec->substream) { 1917 snd_pcm_period_elapsed(codec->substream); 1918 dev_dbg(chip->card->dev, "%s period done (#%x), @ %x\n", 1919 codec->name, 1920 which, 1921 snd_azf3328_codec_inl( 1922 codec, IDX_IO_CODEC_DMA_CURRPOS)); 1923 } else 1924 dev_warn(chip->card->dev, "irq handler problem!\n"); 1925 if (which & IRQ_SOMETHING) 1926 snd_azf3328_irq_log_unknown_type(chip, which); 1927 } 1928 } 1929 1930 static irqreturn_t 1931 snd_azf3328_interrupt(int irq, void *dev_id) 1932 { 1933 struct snd_azf3328 *chip = dev_id; 1934 u8 status; 1935 static unsigned long irq_count; 1936 1937 status = snd_azf3328_ctrl_inb(chip, IDX_IO_IRQSTATUS); 1938 1939 /* fast path out, to ease interrupt sharing */ 1940 if (!(status & 1941 (IRQ_PLAYBACK|IRQ_RECORDING|IRQ_I2S_OUT 1942 |IRQ_GAMEPORT|IRQ_MPU401|IRQ_TIMER) 1943 )) 1944 return IRQ_NONE; /* must be interrupt for another device */ 1945 1946 dev_dbg(chip->card->dev, 1947 "irq_count %ld! IDX_IO_IRQSTATUS %04x\n", 1948 irq_count++ /* debug-only */, 1949 status); 1950 1951 if (status & IRQ_TIMER) { 1952 /* dev_dbg(chip->card->dev, "timer %ld\n", 1953 snd_azf3328_codec_inl(chip, IDX_IO_TIMER_VALUE) 1954 & TIMER_VALUE_MASK 1955 ); */ 1956 if (chip->timer) 1957 snd_timer_interrupt(chip->timer, chip->timer->sticks); 1958 /* ACK timer */ 1959 spin_lock(&chip->reg_lock); 1960 snd_azf3328_ctrl_outb(chip, IDX_IO_TIMER_VALUE + 3, 0x07); 1961 spin_unlock(&chip->reg_lock); 1962 dev_dbg(chip->card->dev, "timer IRQ\n"); 1963 } 1964 1965 if (status & (IRQ_PLAYBACK|IRQ_RECORDING|IRQ_I2S_OUT)) 1966 snd_azf3328_pcm_interrupt(chip, chip->codecs, status); 1967 1968 if (status & IRQ_GAMEPORT) 1969 snd_azf3328_gameport_interrupt(chip); 1970 1971 /* MPU401 has less critical IRQ requirements 1972 * than timer and playback/recording, right? */ 1973 if (status & IRQ_MPU401) { 1974 snd_mpu401_uart_interrupt(irq, chip->rmidi->private_data); 1975 1976 /* hmm, do we have to ack the IRQ here somehow? 1977 * If so, then I don't know how yet... */ 1978 dev_dbg(chip->card->dev, "MPU401 IRQ\n"); 1979 } 1980 return IRQ_HANDLED; 1981 } 1982 1983 /*****************************************************************/ 1984 1985 /* as long as we think we have identical snd_pcm_hardware parameters 1986 for playback, capture and i2s out, we can use the same physical struct 1987 since the struct is simply being copied into a member. 1988 */ 1989 static const struct snd_pcm_hardware snd_azf3328_hardware = 1990 { 1991 /* FIXME!! Correct? */ 1992 .info = SNDRV_PCM_INFO_MMAP | 1993 SNDRV_PCM_INFO_INTERLEAVED | 1994 SNDRV_PCM_INFO_MMAP_VALID, 1995 .formats = SNDRV_PCM_FMTBIT_S8 | 1996 SNDRV_PCM_FMTBIT_U8 | 1997 SNDRV_PCM_FMTBIT_S16_LE | 1998 SNDRV_PCM_FMTBIT_U16_LE, 1999 .rates = SNDRV_PCM_RATE_5512 | 2000 SNDRV_PCM_RATE_8000_48000 | 2001 SNDRV_PCM_RATE_KNOT, 2002 .rate_min = AZF_FREQ_4000, 2003 .rate_max = AZF_FREQ_66200, 2004 .channels_min = 1, 2005 .channels_max = 2, 2006 .buffer_bytes_max = (64*1024), 2007 .period_bytes_min = 1024, 2008 .period_bytes_max = (32*1024), 2009 /* We simply have two DMA areas (instead of a list of descriptors 2010 such as other cards); I believe that this is a fixed hardware 2011 attribute and there isn't much driver magic to be done to expand it. 2012 Thus indicate that we have at least and at most 2 periods. */ 2013 .periods_min = 2, 2014 .periods_max = 2, 2015 /* FIXME: maybe that card actually has a FIFO? 2016 * Hmm, it seems newer revisions do have one, but we still don't know 2017 * its size... */ 2018 .fifo_size = 0, 2019 }; 2020 2021 2022 static unsigned int snd_azf3328_fixed_rates[] = { 2023 AZF_FREQ_4000, 2024 AZF_FREQ_4800, 2025 AZF_FREQ_5512, 2026 AZF_FREQ_6620, 2027 AZF_FREQ_8000, 2028 AZF_FREQ_9600, 2029 AZF_FREQ_11025, 2030 AZF_FREQ_13240, 2031 AZF_FREQ_16000, 2032 AZF_FREQ_22050, 2033 AZF_FREQ_32000, 2034 AZF_FREQ_44100, 2035 AZF_FREQ_48000, 2036 AZF_FREQ_66200 2037 }; 2038 2039 static struct snd_pcm_hw_constraint_list snd_azf3328_hw_constraints_rates = { 2040 .count = ARRAY_SIZE(snd_azf3328_fixed_rates), 2041 .list = snd_azf3328_fixed_rates, 2042 .mask = 0, 2043 }; 2044 2045 /*****************************************************************/ 2046 2047 static int 2048 snd_azf3328_pcm_open(struct snd_pcm_substream *substream, 2049 enum snd_azf3328_codec_type codec_type 2050 ) 2051 { 2052 struct snd_azf3328 *chip = snd_pcm_substream_chip(substream); 2053 struct snd_pcm_runtime *runtime = substream->runtime; 2054 struct snd_azf3328_codec_data *codec = &chip->codecs[codec_type]; 2055 2056 codec->substream = substream; 2057 2058 /* same parameters for all our codecs - at least we think so... */ 2059 runtime->hw = snd_azf3328_hardware; 2060 2061 snd_pcm_hw_constraint_list(runtime, 0, SNDRV_PCM_HW_PARAM_RATE, 2062 &snd_azf3328_hw_constraints_rates); 2063 runtime->private_data = codec; 2064 return 0; 2065 } 2066 2067 static int 2068 snd_azf3328_pcm_playback_open(struct snd_pcm_substream *substream) 2069 { 2070 return snd_azf3328_pcm_open(substream, AZF_CODEC_PLAYBACK); 2071 } 2072 2073 static int 2074 snd_azf3328_pcm_capture_open(struct snd_pcm_substream *substream) 2075 { 2076 return snd_azf3328_pcm_open(substream, AZF_CODEC_CAPTURE); 2077 } 2078 2079 static int 2080 snd_azf3328_pcm_i2s_out_open(struct snd_pcm_substream *substream) 2081 { 2082 return snd_azf3328_pcm_open(substream, AZF_CODEC_I2S_OUT); 2083 } 2084 2085 static int 2086 snd_azf3328_pcm_close(struct snd_pcm_substream *substream 2087 ) 2088 { 2089 struct snd_azf3328_codec_data *codec = 2090 substream->runtime->private_data; 2091 2092 codec->substream = NULL; 2093 return 0; 2094 } 2095 2096 /******************************************************************/ 2097 2098 static struct snd_pcm_ops snd_azf3328_playback_ops = { 2099 .open = snd_azf3328_pcm_playback_open, 2100 .close = snd_azf3328_pcm_close, 2101 .ioctl = snd_pcm_lib_ioctl, 2102 .hw_params = snd_azf3328_hw_params, 2103 .hw_free = snd_azf3328_hw_free, 2104 .prepare = snd_azf3328_pcm_prepare, 2105 .trigger = snd_azf3328_pcm_trigger, 2106 .pointer = snd_azf3328_pcm_pointer 2107 }; 2108 2109 static struct snd_pcm_ops snd_azf3328_capture_ops = { 2110 .open = snd_azf3328_pcm_capture_open, 2111 .close = snd_azf3328_pcm_close, 2112 .ioctl = snd_pcm_lib_ioctl, 2113 .hw_params = snd_azf3328_hw_params, 2114 .hw_free = snd_azf3328_hw_free, 2115 .prepare = snd_azf3328_pcm_prepare, 2116 .trigger = snd_azf3328_pcm_trigger, 2117 .pointer = snd_azf3328_pcm_pointer 2118 }; 2119 2120 static struct snd_pcm_ops snd_azf3328_i2s_out_ops = { 2121 .open = snd_azf3328_pcm_i2s_out_open, 2122 .close = snd_azf3328_pcm_close, 2123 .ioctl = snd_pcm_lib_ioctl, 2124 .hw_params = snd_azf3328_hw_params, 2125 .hw_free = snd_azf3328_hw_free, 2126 .prepare = snd_azf3328_pcm_prepare, 2127 .trigger = snd_azf3328_pcm_trigger, 2128 .pointer = snd_azf3328_pcm_pointer 2129 }; 2130 2131 static int 2132 snd_azf3328_pcm(struct snd_azf3328 *chip) 2133 { 2134 enum { AZF_PCMDEV_STD, AZF_PCMDEV_I2S_OUT, NUM_AZF_PCMDEVS }; /* pcm devices */ 2135 2136 struct snd_pcm *pcm; 2137 int err; 2138 2139 err = snd_pcm_new(chip->card, "AZF3328 DSP", AZF_PCMDEV_STD, 2140 1, 1, &pcm); 2141 if (err < 0) 2142 return err; 2143 snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, 2144 &snd_azf3328_playback_ops); 2145 snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE, 2146 &snd_azf3328_capture_ops); 2147 2148 pcm->private_data = chip; 2149 pcm->info_flags = 0; 2150 strcpy(pcm->name, chip->card->shortname); 2151 /* same pcm object for playback/capture (see snd_pcm_new() above) */ 2152 chip->pcm[AZF_CODEC_PLAYBACK] = pcm; 2153 chip->pcm[AZF_CODEC_CAPTURE] = pcm; 2154 2155 snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_DEV, 2156 snd_dma_pci_data(chip->pci), 2157 64*1024, 64*1024); 2158 2159 err = snd_pcm_new(chip->card, "AZF3328 I2S OUT", AZF_PCMDEV_I2S_OUT, 2160 1, 0, &pcm); 2161 if (err < 0) 2162 return err; 2163 snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, 2164 &snd_azf3328_i2s_out_ops); 2165 2166 pcm->private_data = chip; 2167 pcm->info_flags = 0; 2168 strcpy(pcm->name, chip->card->shortname); 2169 chip->pcm[AZF_CODEC_I2S_OUT] = pcm; 2170 2171 snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_DEV, 2172 snd_dma_pci_data(chip->pci), 2173 64*1024, 64*1024); 2174 2175 return 0; 2176 } 2177 2178 /******************************************************************/ 2179 2180 /*** NOTE: the physical timer resolution actually is 1024000 ticks per second 2181 *** (probably derived from main crystal via a divider of 24), 2182 *** but announcing those attributes to user-space would make programs 2183 *** configure the timer to a 1 tick value, resulting in an absolutely fatal 2184 *** timer IRQ storm. 2185 *** Thus I chose to announce a down-scaled virtual timer to the outside and 2186 *** calculate real timer countdown values internally. 2187 *** (the scale factor can be set via module parameter "seqtimer_scaling"). 2188 ***/ 2189 2190 static int 2191 snd_azf3328_timer_start(struct snd_timer *timer) 2192 { 2193 struct snd_azf3328 *chip; 2194 unsigned long flags; 2195 unsigned int delay; 2196 2197 chip = snd_timer_chip(timer); 2198 delay = ((timer->sticks * seqtimer_scaling) - 1) & TIMER_VALUE_MASK; 2199 if (delay < 49) { 2200 /* uhoh, that's not good, since user-space won't know about 2201 * this timing tweak 2202 * (we need to do it to avoid a lockup, though) */ 2203 2204 dev_dbg(chip->card->dev, "delay was too low (%d)!\n", delay); 2205 delay = 49; /* minimum time is 49 ticks */ 2206 } 2207 dev_dbg(chip->card->dev, "setting timer countdown value %d\n", delay); 2208 delay |= TIMER_COUNTDOWN_ENABLE | TIMER_IRQ_ENABLE; 2209 spin_lock_irqsave(&chip->reg_lock, flags); 2210 snd_azf3328_ctrl_outl(chip, IDX_IO_TIMER_VALUE, delay); 2211 spin_unlock_irqrestore(&chip->reg_lock, flags); 2212 return 0; 2213 } 2214 2215 static int 2216 snd_azf3328_timer_stop(struct snd_timer *timer) 2217 { 2218 struct snd_azf3328 *chip; 2219 unsigned long flags; 2220 2221 chip = snd_timer_chip(timer); 2222 spin_lock_irqsave(&chip->reg_lock, flags); 2223 /* disable timer countdown and interrupt */ 2224 /* Hmm, should we write TIMER_IRQ_ACK here? 2225 YES indeed, otherwise a rogue timer operation - which prompts 2226 ALSA(?) to call repeated stop() in vain, but NOT start() - 2227 will never end (value 0x03 is kept shown in control byte). 2228 Simply manually poking 0x04 _once_ immediately successfully stops 2229 the hardware/ALSA interrupt activity. */ 2230 snd_azf3328_ctrl_outb(chip, IDX_IO_TIMER_VALUE + 3, 0x04); 2231 spin_unlock_irqrestore(&chip->reg_lock, flags); 2232 return 0; 2233 } 2234 2235 2236 static int 2237 snd_azf3328_timer_precise_resolution(struct snd_timer *timer, 2238 unsigned long *num, unsigned long *den) 2239 { 2240 *num = 1; 2241 *den = 1024000 / seqtimer_scaling; 2242 return 0; 2243 } 2244 2245 static struct snd_timer_hardware snd_azf3328_timer_hw = { 2246 .flags = SNDRV_TIMER_HW_AUTO, 2247 .resolution = 977, /* 1000000/1024000 = 0.9765625us */ 2248 .ticks = 1024000, /* max tick count, defined by the value register; actually it's not 1024000, but 1048576, but we don't care */ 2249 .start = snd_azf3328_timer_start, 2250 .stop = snd_azf3328_timer_stop, 2251 .precise_resolution = snd_azf3328_timer_precise_resolution, 2252 }; 2253 2254 static int 2255 snd_azf3328_timer(struct snd_azf3328 *chip, int device) 2256 { 2257 struct snd_timer *timer = NULL; 2258 struct snd_timer_id tid; 2259 int err; 2260 2261 tid.dev_class = SNDRV_TIMER_CLASS_CARD; 2262 tid.dev_sclass = SNDRV_TIMER_SCLASS_NONE; 2263 tid.card = chip->card->number; 2264 tid.device = device; 2265 tid.subdevice = 0; 2266 2267 snd_azf3328_timer_hw.resolution *= seqtimer_scaling; 2268 snd_azf3328_timer_hw.ticks /= seqtimer_scaling; 2269 2270 err = snd_timer_new(chip->card, "AZF3328", &tid, &timer); 2271 if (err < 0) 2272 goto out; 2273 2274 strcpy(timer->name, "AZF3328 timer"); 2275 timer->private_data = chip; 2276 timer->hw = snd_azf3328_timer_hw; 2277 2278 chip->timer = timer; 2279 2280 snd_azf3328_timer_stop(timer); 2281 2282 err = 0; 2283 2284 out: 2285 return err; 2286 } 2287 2288 /******************************************************************/ 2289 2290 static int 2291 snd_azf3328_free(struct snd_azf3328 *chip) 2292 { 2293 if (chip->irq < 0) 2294 goto __end_hw; 2295 2296 snd_azf3328_mixer_reset(chip); 2297 2298 snd_azf3328_timer_stop(chip->timer); 2299 snd_azf3328_gameport_free(chip); 2300 2301 if (chip->irq >= 0) 2302 synchronize_irq(chip->irq); 2303 __end_hw: 2304 if (chip->irq >= 0) 2305 free_irq(chip->irq, chip); 2306 pci_release_regions(chip->pci); 2307 pci_disable_device(chip->pci); 2308 2309 kfree(chip); 2310 return 0; 2311 } 2312 2313 static int 2314 snd_azf3328_dev_free(struct snd_device *device) 2315 { 2316 struct snd_azf3328 *chip = device->device_data; 2317 return snd_azf3328_free(chip); 2318 } 2319 2320 #if 0 2321 /* check whether a bit can be modified */ 2322 static void 2323 snd_azf3328_test_bit(unsigned unsigned reg, int bit) 2324 { 2325 unsigned char val, valoff, valon; 2326 2327 val = inb(reg); 2328 2329 outb(val & ~(1 << bit), reg); 2330 valoff = inb(reg); 2331 2332 outb(val|(1 << bit), reg); 2333 valon = inb(reg); 2334 2335 outb(val, reg); 2336 2337 printk(KERN_DEBUG "reg %04x bit %d: %02x %02x %02x\n", 2338 reg, bit, val, valoff, valon 2339 ); 2340 } 2341 #endif 2342 2343 static inline void 2344 snd_azf3328_debug_show_ports(const struct snd_azf3328 *chip) 2345 { 2346 u16 tmp; 2347 2348 dev_dbg(chip->card->dev, 2349 "ctrl_io 0x%lx, game_io 0x%lx, mpu_io 0x%lx, " 2350 "opl3_io 0x%lx, mixer_io 0x%lx, irq %d\n", 2351 chip->ctrl_io, chip->game_io, chip->mpu_io, 2352 chip->opl3_io, chip->mixer_io, chip->irq); 2353 2354 dev_dbg(chip->card->dev, 2355 "game %02x %02x %02x %02x %02x %02x\n", 2356 snd_azf3328_game_inb(chip, 0), 2357 snd_azf3328_game_inb(chip, 1), 2358 snd_azf3328_game_inb(chip, 2), 2359 snd_azf3328_game_inb(chip, 3), 2360 snd_azf3328_game_inb(chip, 4), 2361 snd_azf3328_game_inb(chip, 5)); 2362 2363 for (tmp = 0; tmp < 0x07; tmp += 1) 2364 dev_dbg(chip->card->dev, 2365 "mpu_io 0x%04x\n", inb(chip->mpu_io + tmp)); 2366 2367 for (tmp = 0; tmp <= 0x07; tmp += 1) 2368 dev_dbg(chip->card->dev, 2369 "0x%02x: game200 0x%04x, game208 0x%04x\n", 2370 tmp, inb(0x200 + tmp), inb(0x208 + tmp)); 2371 2372 for (tmp = 0; tmp <= 0x01; tmp += 1) 2373 dev_dbg(chip->card->dev, 2374 "0x%02x: mpu300 0x%04x, mpu310 0x%04x, mpu320 0x%04x, " 2375 "mpu330 0x%04x opl388 0x%04x opl38c 0x%04x\n", 2376 tmp, 2377 inb(0x300 + tmp), 2378 inb(0x310 + tmp), 2379 inb(0x320 + tmp), 2380 inb(0x330 + tmp), 2381 inb(0x388 + tmp), 2382 inb(0x38c + tmp)); 2383 2384 for (tmp = 0; tmp < AZF_IO_SIZE_CTRL; tmp += 2) 2385 dev_dbg(chip->card->dev, 2386 "ctrl 0x%02x: 0x%04x\n", 2387 tmp, snd_azf3328_ctrl_inw(chip, tmp)); 2388 2389 for (tmp = 0; tmp < AZF_IO_SIZE_MIXER; tmp += 2) 2390 dev_dbg(chip->card->dev, 2391 "mixer 0x%02x: 0x%04x\n", 2392 tmp, snd_azf3328_mixer_inw(chip, tmp)); 2393 } 2394 2395 static int 2396 snd_azf3328_create(struct snd_card *card, 2397 struct pci_dev *pci, 2398 unsigned long device_type, 2399 struct snd_azf3328 **rchip) 2400 { 2401 struct snd_azf3328 *chip; 2402 int err; 2403 static struct snd_device_ops ops = { 2404 .dev_free = snd_azf3328_dev_free, 2405 }; 2406 u8 dma_init; 2407 enum snd_azf3328_codec_type codec_type; 2408 struct snd_azf3328_codec_data *codec_setup; 2409 2410 *rchip = NULL; 2411 2412 err = pci_enable_device(pci); 2413 if (err < 0) 2414 return err; 2415 2416 chip = kzalloc(sizeof(*chip), GFP_KERNEL); 2417 if (chip == NULL) { 2418 err = -ENOMEM; 2419 goto out_err; 2420 } 2421 spin_lock_init(&chip->reg_lock); 2422 chip->card = card; 2423 chip->pci = pci; 2424 chip->irq = -1; 2425 2426 /* check if we can restrict PCI DMA transfers to 24 bits */ 2427 if (pci_set_dma_mask(pci, DMA_BIT_MASK(24)) < 0 || 2428 pci_set_consistent_dma_mask(pci, DMA_BIT_MASK(24)) < 0) { 2429 dev_err(card->dev, 2430 "architecture does not support 24bit PCI busmaster DMA\n" 2431 ); 2432 err = -ENXIO; 2433 goto out_err; 2434 } 2435 2436 err = pci_request_regions(pci, "Aztech AZF3328"); 2437 if (err < 0) 2438 goto out_err; 2439 2440 chip->ctrl_io = pci_resource_start(pci, 0); 2441 chip->game_io = pci_resource_start(pci, 1); 2442 chip->mpu_io = pci_resource_start(pci, 2); 2443 chip->opl3_io = pci_resource_start(pci, 3); 2444 chip->mixer_io = pci_resource_start(pci, 4); 2445 2446 codec_setup = &chip->codecs[AZF_CODEC_PLAYBACK]; 2447 codec_setup->io_base = chip->ctrl_io + AZF_IO_OFFS_CODEC_PLAYBACK; 2448 codec_setup->lock = &chip->reg_lock; 2449 codec_setup->type = AZF_CODEC_PLAYBACK; 2450 codec_setup->name = "PLAYBACK"; 2451 2452 codec_setup = &chip->codecs[AZF_CODEC_CAPTURE]; 2453 codec_setup->io_base = chip->ctrl_io + AZF_IO_OFFS_CODEC_CAPTURE; 2454 codec_setup->lock = &chip->reg_lock; 2455 codec_setup->type = AZF_CODEC_CAPTURE; 2456 codec_setup->name = "CAPTURE"; 2457 2458 codec_setup = &chip->codecs[AZF_CODEC_I2S_OUT]; 2459 codec_setup->io_base = chip->ctrl_io + AZF_IO_OFFS_CODEC_I2S_OUT; 2460 codec_setup->lock = &chip->reg_lock; 2461 codec_setup->type = AZF_CODEC_I2S_OUT; 2462 codec_setup->name = "I2S_OUT"; 2463 2464 if (request_irq(pci->irq, snd_azf3328_interrupt, 2465 IRQF_SHARED, KBUILD_MODNAME, chip)) { 2466 dev_err(card->dev, "unable to grab IRQ %d\n", pci->irq); 2467 err = -EBUSY; 2468 goto out_err; 2469 } 2470 chip->irq = pci->irq; 2471 pci_set_master(pci); 2472 synchronize_irq(chip->irq); 2473 2474 snd_azf3328_debug_show_ports(chip); 2475 2476 err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops); 2477 if (err < 0) 2478 goto out_err; 2479 2480 /* create mixer interface & switches */ 2481 err = snd_azf3328_mixer_new(chip); 2482 if (err < 0) 2483 goto out_err; 2484 2485 /* standard codec init stuff */ 2486 /* default DMA init value */ 2487 dma_init = DMA_RUN_SOMETHING2|DMA_EPILOGUE_SOMETHING|DMA_SOMETHING_ELSE; 2488 2489 for (codec_type = AZF_CODEC_PLAYBACK; 2490 codec_type <= AZF_CODEC_I2S_OUT; ++codec_type) { 2491 struct snd_azf3328_codec_data *codec = 2492 &chip->codecs[codec_type]; 2493 2494 /* shutdown codecs to reduce power / noise */ 2495 /* have ...ctrl_codec_activity() act properly */ 2496 codec->running = 1; 2497 snd_azf3328_ctrl_codec_activity(chip, codec_type, 0); 2498 2499 spin_lock_irq(codec->lock); 2500 snd_azf3328_codec_outb(codec, IDX_IO_CODEC_DMA_FLAGS, 2501 dma_init); 2502 spin_unlock_irq(codec->lock); 2503 } 2504 2505 *rchip = chip; 2506 2507 err = 0; 2508 goto out; 2509 2510 out_err: 2511 if (chip) 2512 snd_azf3328_free(chip); 2513 pci_disable_device(pci); 2514 2515 out: 2516 return err; 2517 } 2518 2519 static int 2520 snd_azf3328_probe(struct pci_dev *pci, const struct pci_device_id *pci_id) 2521 { 2522 static int dev; 2523 struct snd_card *card; 2524 struct snd_azf3328 *chip; 2525 struct snd_opl3 *opl3; 2526 int err; 2527 2528 if (dev >= SNDRV_CARDS) { 2529 err = -ENODEV; 2530 goto out; 2531 } 2532 if (!enable[dev]) { 2533 dev++; 2534 err = -ENOENT; 2535 goto out; 2536 } 2537 2538 err = snd_card_new(&pci->dev, index[dev], id[dev], THIS_MODULE, 2539 0, &card); 2540 if (err < 0) 2541 goto out; 2542 2543 strcpy(card->driver, "AZF3328"); 2544 strcpy(card->shortname, "Aztech AZF3328 (PCI168)"); 2545 2546 err = snd_azf3328_create(card, pci, pci_id->driver_data, &chip); 2547 if (err < 0) 2548 goto out_err; 2549 2550 card->private_data = chip; 2551 2552 /* chose to use MPU401_HW_AZT2320 ID instead of MPU401_HW_MPU401, 2553 since our hardware ought to be similar, thus use same ID. */ 2554 err = snd_mpu401_uart_new( 2555 card, 0, 2556 MPU401_HW_AZT2320, chip->mpu_io, 2557 MPU401_INFO_INTEGRATED | MPU401_INFO_IRQ_HOOK, 2558 -1, &chip->rmidi 2559 ); 2560 if (err < 0) { 2561 dev_err(card->dev, "no MPU-401 device at 0x%lx?\n", 2562 chip->mpu_io 2563 ); 2564 goto out_err; 2565 } 2566 2567 err = snd_azf3328_timer(chip, 0); 2568 if (err < 0) 2569 goto out_err; 2570 2571 err = snd_azf3328_pcm(chip); 2572 if (err < 0) 2573 goto out_err; 2574 2575 if (snd_opl3_create(card, chip->opl3_io, chip->opl3_io+2, 2576 OPL3_HW_AUTO, 1, &opl3) < 0) { 2577 dev_err(card->dev, "no OPL3 device at 0x%lx-0x%lx?\n", 2578 chip->opl3_io, chip->opl3_io+2 2579 ); 2580 } else { 2581 /* need to use IDs 1, 2 since ID 0 is snd_azf3328_timer above */ 2582 err = snd_opl3_timer_new(opl3, 1, 2); 2583 if (err < 0) 2584 goto out_err; 2585 err = snd_opl3_hwdep_new(opl3, 0, 1, NULL); 2586 if (err < 0) 2587 goto out_err; 2588 opl3->private_data = chip; 2589 } 2590 2591 sprintf(card->longname, "%s at 0x%lx, irq %i", 2592 card->shortname, chip->ctrl_io, chip->irq); 2593 2594 err = snd_card_register(card); 2595 if (err < 0) 2596 goto out_err; 2597 2598 #ifdef MODULE 2599 dev_info(card->dev, 2600 "Sound driver for Aztech AZF3328-based soundcards such as PCI168.\n"); 2601 dev_info(card->dev, 2602 "Hardware was completely undocumented, unfortunately.\n"); 2603 dev_info(card->dev, 2604 "Feel free to contact andi AT lisas.de for bug reports etc.!\n"); 2605 dev_info(card->dev, 2606 "User-scalable sequencer timer set to %dHz (1024000Hz / %d).\n", 2607 1024000 / seqtimer_scaling, seqtimer_scaling); 2608 #endif 2609 2610 snd_azf3328_gameport(chip, dev); 2611 2612 pci_set_drvdata(pci, card); 2613 dev++; 2614 2615 err = 0; 2616 goto out; 2617 2618 out_err: 2619 dev_err(card->dev, "something failed, exiting\n"); 2620 snd_card_free(card); 2621 2622 out: 2623 return err; 2624 } 2625 2626 static void 2627 snd_azf3328_remove(struct pci_dev *pci) 2628 { 2629 snd_card_free(pci_get_drvdata(pci)); 2630 } 2631 2632 #ifdef CONFIG_PM_SLEEP 2633 static inline void 2634 snd_azf3328_suspend_regs(const struct snd_azf3328 *chip, 2635 unsigned long io_addr, unsigned count, u32 *saved_regs) 2636 { 2637 unsigned reg; 2638 2639 for (reg = 0; reg < count; ++reg) { 2640 *saved_regs = inl(io_addr); 2641 dev_dbg(chip->card->dev, "suspend: io 0x%04lx: 0x%08x\n", 2642 io_addr, *saved_regs); 2643 ++saved_regs; 2644 io_addr += sizeof(*saved_regs); 2645 } 2646 } 2647 2648 static inline void 2649 snd_azf3328_resume_regs(const struct snd_azf3328 *chip, 2650 const u32 *saved_regs, 2651 unsigned long io_addr, 2652 unsigned count 2653 ) 2654 { 2655 unsigned reg; 2656 2657 for (reg = 0; reg < count; ++reg) { 2658 outl(*saved_regs, io_addr); 2659 dev_dbg(chip->card->dev, 2660 "resume: io 0x%04lx: 0x%08x --> 0x%08x\n", 2661 io_addr, *saved_regs, inl(io_addr)); 2662 ++saved_regs; 2663 io_addr += sizeof(*saved_regs); 2664 } 2665 } 2666 2667 static inline void 2668 snd_azf3328_suspend_ac97(struct snd_azf3328 *chip) 2669 { 2670 #ifdef AZF_USE_AC97_LAYER 2671 snd_ac97_suspend(chip->ac97); 2672 #else 2673 snd_azf3328_suspend_regs(chip, chip->mixer_io, 2674 ARRAY_SIZE(chip->saved_regs_mixer), chip->saved_regs_mixer); 2675 2676 /* make sure to disable master volume etc. to prevent looping sound */ 2677 snd_azf3328_mixer_mute_control_master(chip, 1); 2678 snd_azf3328_mixer_mute_control_pcm(chip, 1); 2679 #endif /* AZF_USE_AC97_LAYER */ 2680 } 2681 2682 static inline void 2683 snd_azf3328_resume_ac97(const struct snd_azf3328 *chip) 2684 { 2685 #ifdef AZF_USE_AC97_LAYER 2686 snd_ac97_resume(chip->ac97); 2687 #else 2688 snd_azf3328_resume_regs(chip, chip->saved_regs_mixer, chip->mixer_io, 2689 ARRAY_SIZE(chip->saved_regs_mixer)); 2690 2691 /* unfortunately with 32bit transfers, IDX_MIXER_PLAY_MASTER (0x02) 2692 and IDX_MIXER_RESET (offset 0x00) get touched at the same time, 2693 resulting in a mixer reset condition persisting until _after_ 2694 master vol was restored. Thus master vol needs an extra restore. */ 2695 outw(((u16 *)chip->saved_regs_mixer)[1], chip->mixer_io + 2); 2696 #endif /* AZF_USE_AC97_LAYER */ 2697 } 2698 2699 static int 2700 snd_azf3328_suspend(struct device *dev) 2701 { 2702 struct pci_dev *pci = to_pci_dev(dev); 2703 struct snd_card *card = dev_get_drvdata(dev); 2704 struct snd_azf3328 *chip = card->private_data; 2705 u16 *saved_regs_ctrl_u16; 2706 2707 snd_power_change_state(card, SNDRV_CTL_POWER_D3hot); 2708 2709 /* same pcm object for playback/capture */ 2710 snd_pcm_suspend_all(chip->pcm[AZF_CODEC_PLAYBACK]); 2711 snd_pcm_suspend_all(chip->pcm[AZF_CODEC_I2S_OUT]); 2712 2713 snd_azf3328_suspend_ac97(chip); 2714 2715 snd_azf3328_suspend_regs(chip, chip->ctrl_io, 2716 ARRAY_SIZE(chip->saved_regs_ctrl), chip->saved_regs_ctrl); 2717 2718 /* manually store the one currently relevant write-only reg, too */ 2719 saved_regs_ctrl_u16 = (u16 *)chip->saved_regs_ctrl; 2720 saved_regs_ctrl_u16[IDX_IO_6AH / 2] = chip->shadow_reg_ctrl_6AH; 2721 2722 snd_azf3328_suspend_regs(chip, chip->game_io, 2723 ARRAY_SIZE(chip->saved_regs_game), chip->saved_regs_game); 2724 snd_azf3328_suspend_regs(chip, chip->mpu_io, 2725 ARRAY_SIZE(chip->saved_regs_mpu), chip->saved_regs_mpu); 2726 snd_azf3328_suspend_regs(chip, chip->opl3_io, 2727 ARRAY_SIZE(chip->saved_regs_opl3), chip->saved_regs_opl3); 2728 2729 pci_disable_device(pci); 2730 pci_save_state(pci); 2731 pci_set_power_state(pci, PCI_D3hot); 2732 return 0; 2733 } 2734 2735 static int 2736 snd_azf3328_resume(struct device *dev) 2737 { 2738 struct pci_dev *pci = to_pci_dev(dev); 2739 struct snd_card *card = dev_get_drvdata(dev); 2740 const struct snd_azf3328 *chip = card->private_data; 2741 2742 pci_set_power_state(pci, PCI_D0); 2743 pci_restore_state(pci); 2744 if (pci_enable_device(pci) < 0) { 2745 dev_err(dev, "pci_enable_device failed, disabling device\n"); 2746 snd_card_disconnect(card); 2747 return -EIO; 2748 } 2749 pci_set_master(pci); 2750 2751 snd_azf3328_resume_regs(chip, chip->saved_regs_game, chip->game_io, 2752 ARRAY_SIZE(chip->saved_regs_game)); 2753 snd_azf3328_resume_regs(chip, chip->saved_regs_mpu, chip->mpu_io, 2754 ARRAY_SIZE(chip->saved_regs_mpu)); 2755 snd_azf3328_resume_regs(chip, chip->saved_regs_opl3, chip->opl3_io, 2756 ARRAY_SIZE(chip->saved_regs_opl3)); 2757 2758 snd_azf3328_resume_ac97(chip); 2759 2760 snd_azf3328_resume_regs(chip, chip->saved_regs_ctrl, chip->ctrl_io, 2761 ARRAY_SIZE(chip->saved_regs_ctrl)); 2762 2763 snd_power_change_state(card, SNDRV_CTL_POWER_D0); 2764 return 0; 2765 } 2766 2767 static SIMPLE_DEV_PM_OPS(snd_azf3328_pm, snd_azf3328_suspend, snd_azf3328_resume); 2768 #define SND_AZF3328_PM_OPS &snd_azf3328_pm 2769 #else 2770 #define SND_AZF3328_PM_OPS NULL 2771 #endif /* CONFIG_PM_SLEEP */ 2772 2773 static struct pci_driver azf3328_driver = { 2774 .name = KBUILD_MODNAME, 2775 .id_table = snd_azf3328_ids, 2776 .probe = snd_azf3328_probe, 2777 .remove = snd_azf3328_remove, 2778 .driver = { 2779 .pm = SND_AZF3328_PM_OPS, 2780 }, 2781 }; 2782 2783 module_pci_driver(azf3328_driver); 2784