1 /*
2  *  linux/sound/oss/dmasound/dmasound_paula.c
3  *
4  *  Amiga `Paula' DMA Sound Driver
5  *
6  *  See linux/sound/oss/dmasound/dmasound_core.c for copyright and credits
7  *  prior to 28/01/2001
8  *
9  *  28/01/2001 [0.1] Iain Sandoe
10  *		     - added versioning
11  *		     - put in and populated the hardware_afmts field.
12  *             [0.2] - put in SNDCTL_DSP_GETCAPS value.
13  *	       [0.3] - put in constraint on state buffer usage.
14  *	       [0.4] - put in default hard/soft settings
15 */
16 
17 
18 #include <linux/module.h>
19 #include <linux/mm.h>
20 #include <linux/init.h>
21 #include <linux/ioport.h>
22 #include <linux/soundcard.h>
23 #include <linux/interrupt.h>
24 #include <linux/platform_device.h>
25 
26 #include <linux/uaccess.h>
27 #include <asm/setup.h>
28 #include <asm/amigahw.h>
29 #include <asm/amigaints.h>
30 #include <asm/machdep.h>
31 
32 #include "dmasound.h"
33 
34 #define DMASOUND_PAULA_REVISION 0
35 #define DMASOUND_PAULA_EDITION 4
36 
37 #define custom amiga_custom
38    /*
39     *	The minimum period for audio depends on htotal (for OCS/ECS/AGA)
40     *	(Imported from arch/m68k/amiga/amisound.c)
41     */
42 
43 extern volatile u_short amiga_audio_min_period;
44 
45 
46    /*
47     *	amiga_mksound() should be able to restore the period after beeping
48     *	(Imported from arch/m68k/amiga/amisound.c)
49     */
50 
51 extern u_short amiga_audio_period;
52 
53 
54    /*
55     *	Audio DMA masks
56     */
57 
58 #define AMI_AUDIO_OFF	(DMAF_AUD0 | DMAF_AUD1 | DMAF_AUD2 | DMAF_AUD3)
59 #define AMI_AUDIO_8	(DMAF_SETCLR | DMAF_MASTER | DMAF_AUD0 | DMAF_AUD1)
60 #define AMI_AUDIO_14	(AMI_AUDIO_8 | DMAF_AUD2 | DMAF_AUD3)
61 
62 
63     /*
64      *  Helper pointers for 16(14)-bit sound
65      */
66 
67 static int write_sq_block_size_half, write_sq_block_size_quarter;
68 
69 
70 /*** Low level stuff *********************************************************/
71 
72 
73 static void *AmiAlloc(unsigned int size, gfp_t flags);
74 static void AmiFree(void *obj, unsigned int size);
75 static int AmiIrqInit(void);
76 #ifdef MODULE
77 static void AmiIrqCleanUp(void);
78 #endif
79 static void AmiSilence(void);
80 static void AmiInit(void);
81 static int AmiSetFormat(int format);
82 static int AmiSetVolume(int volume);
83 static int AmiSetTreble(int treble);
84 static void AmiPlayNextFrame(int index);
85 static void AmiPlay(void);
86 static irqreturn_t AmiInterrupt(int irq, void *dummy);
87 
88 #ifdef CONFIG_HEARTBEAT
89 
90     /*
91      *  Heartbeat interferes with sound since the 7 kHz low-pass filter and the
92      *  power LED are controlled by the same line.
93      */
94 
95 static void (*saved_heartbeat)(int) = NULL;
96 
97 static inline void disable_heartbeat(void)
98 {
99 	if (mach_heartbeat) {
100 	    saved_heartbeat = mach_heartbeat;
101 	    mach_heartbeat = NULL;
102 	}
103 	AmiSetTreble(dmasound.treble);
104 }
105 
106 static inline void enable_heartbeat(void)
107 {
108 	if (saved_heartbeat)
109 	    mach_heartbeat = saved_heartbeat;
110 }
111 #else /* !CONFIG_HEARTBEAT */
112 #define disable_heartbeat()	do { } while (0)
113 #define enable_heartbeat()	do { } while (0)
114 #endif /* !CONFIG_HEARTBEAT */
115 
116 
117 /*** Mid level stuff *********************************************************/
118 
119 static void AmiMixerInit(void);
120 static int AmiMixerIoctl(u_int cmd, u_long arg);
121 static int AmiWriteSqSetup(void);
122 static int AmiStateInfo(char *buffer, size_t space);
123 
124 
125 /*** Translations ************************************************************/
126 
127 /* ++TeSche: radically changed for new expanding purposes...
128  *
129  * These two routines now deal with copying/expanding/translating the samples
130  * from user space into our buffer at the right frequency. They take care about
131  * how much data there's actually to read, how much buffer space there is and
132  * to convert samples into the right frequency/encoding. They will only work on
133  * complete samples so it may happen they leave some bytes in the input stream
134  * if the user didn't write a multiple of the current sample size. They both
135  * return the number of bytes they've used from both streams so you may detect
136  * such a situation. Luckily all programs should be able to cope with that.
137  *
138  * I think I've optimized anything as far as one can do in plain C, all
139  * variables should fit in registers and the loops are really short. There's
140  * one loop for every possible situation. Writing a more generalized and thus
141  * parameterized loop would only produce slower code. Feel free to optimize
142  * this in assembler if you like. :)
143  *
144  * I think these routines belong here because they're not yet really hardware
145  * independent, especially the fact that the Falcon can play 16bit samples
146  * only in stereo is hardcoded in both of them!
147  *
148  * ++geert: split in even more functions (one per format)
149  */
150 
151 
152     /*
153      *  Native format
154      */
155 
156 static ssize_t ami_ct_s8(const u_char __user *userPtr, size_t userCount,
157 			 u_char frame[], ssize_t *frameUsed, ssize_t frameLeft)
158 {
159 	ssize_t count, used;
160 
161 	if (!dmasound.soft.stereo) {
162 		void *p = &frame[*frameUsed];
163 		count = min_t(unsigned long, userCount, frameLeft) & ~1;
164 		used = count;
165 		if (copy_from_user(p, userPtr, count))
166 			return -EFAULT;
167 	} else {
168 		u_char *left = &frame[*frameUsed>>1];
169 		u_char *right = left+write_sq_block_size_half;
170 		count = min_t(unsigned long, userCount, frameLeft)>>1 & ~1;
171 		used = count*2;
172 		while (count > 0) {
173 			if (get_user(*left++, userPtr++)
174 			    || get_user(*right++, userPtr++))
175 				return -EFAULT;
176 			count--;
177 		}
178 	}
179 	*frameUsed += used;
180 	return used;
181 }
182 
183 
184     /*
185      *  Copy and convert 8 bit data
186      */
187 
188 #define GENERATE_AMI_CT8(funcname, convsample)				\
189 static ssize_t funcname(const u_char __user *userPtr, size_t userCount,	\
190 			u_char frame[], ssize_t *frameUsed,		\
191 			ssize_t frameLeft)				\
192 {									\
193 	ssize_t count, used;						\
194 									\
195 	if (!dmasound.soft.stereo) {					\
196 		u_char *p = &frame[*frameUsed];				\
197 		count = min_t(size_t, userCount, frameLeft) & ~1;	\
198 		used = count;						\
199 		while (count > 0) {					\
200 			u_char data;					\
201 			if (get_user(data, userPtr++))			\
202 				return -EFAULT;				\
203 			*p++ = convsample(data);			\
204 			count--;					\
205 		}							\
206 	} else {							\
207 		u_char *left = &frame[*frameUsed>>1];			\
208 		u_char *right = left+write_sq_block_size_half;		\
209 		count = min_t(size_t, userCount, frameLeft)>>1 & ~1;	\
210 		used = count*2;						\
211 		while (count > 0) {					\
212 			u_char data;					\
213 			if (get_user(data, userPtr++))			\
214 				return -EFAULT;				\
215 			*left++ = convsample(data);			\
216 			if (get_user(data, userPtr++))			\
217 				return -EFAULT;				\
218 			*right++ = convsample(data);			\
219 			count--;					\
220 		}							\
221 	}								\
222 	*frameUsed += used;						\
223 	return used;							\
224 }
225 
226 #define AMI_CT_ULAW(x)	(dmasound_ulaw2dma8[(x)])
227 #define AMI_CT_ALAW(x)	(dmasound_alaw2dma8[(x)])
228 #define AMI_CT_U8(x)	((x) ^ 0x80)
229 
230 GENERATE_AMI_CT8(ami_ct_ulaw, AMI_CT_ULAW)
231 GENERATE_AMI_CT8(ami_ct_alaw, AMI_CT_ALAW)
232 GENERATE_AMI_CT8(ami_ct_u8, AMI_CT_U8)
233 
234 
235     /*
236      *  Copy and convert 16 bit data
237      */
238 
239 #define GENERATE_AMI_CT_16(funcname, convsample)			\
240 static ssize_t funcname(const u_char __user *userPtr, size_t userCount,	\
241 			u_char frame[], ssize_t *frameUsed,		\
242 			ssize_t frameLeft)				\
243 {									\
244 	const u_short __user *ptr = (const u_short __user *)userPtr;	\
245 	ssize_t count, used;						\
246 	u_short data;							\
247 									\
248 	if (!dmasound.soft.stereo) {					\
249 		u_char *high = &frame[*frameUsed>>1];			\
250 		u_char *low = high+write_sq_block_size_half;		\
251 		count = min_t(size_t, userCount, frameLeft)>>1 & ~1;	\
252 		used = count*2;						\
253 		while (count > 0) {					\
254 			if (get_user(data, ptr++))			\
255 				return -EFAULT;				\
256 			data = convsample(data);			\
257 			*high++ = data>>8;				\
258 			*low++ = (data>>2) & 0x3f;			\
259 			count--;					\
260 		}							\
261 	} else {							\
262 		u_char *lefth = &frame[*frameUsed>>2];			\
263 		u_char *leftl = lefth+write_sq_block_size_quarter;	\
264 		u_char *righth = lefth+write_sq_block_size_half;	\
265 		u_char *rightl = righth+write_sq_block_size_quarter;	\
266 		count = min_t(size_t, userCount, frameLeft)>>2 & ~1;	\
267 		used = count*4;						\
268 		while (count > 0) {					\
269 			if (get_user(data, ptr++))			\
270 				return -EFAULT;				\
271 			data = convsample(data);			\
272 			*lefth++ = data>>8;				\
273 			*leftl++ = (data>>2) & 0x3f;			\
274 			if (get_user(data, ptr++))			\
275 				return -EFAULT;				\
276 			data = convsample(data);			\
277 			*righth++ = data>>8;				\
278 			*rightl++ = (data>>2) & 0x3f;			\
279 			count--;					\
280 		}							\
281 	}								\
282 	*frameUsed += used;						\
283 	return used;							\
284 }
285 
286 #define AMI_CT_S16BE(x)	(x)
287 #define AMI_CT_U16BE(x)	((x) ^ 0x8000)
288 #define AMI_CT_S16LE(x)	(le2be16((x)))
289 #define AMI_CT_U16LE(x)	(le2be16((x)) ^ 0x8000)
290 
291 GENERATE_AMI_CT_16(ami_ct_s16be, AMI_CT_S16BE)
292 GENERATE_AMI_CT_16(ami_ct_u16be, AMI_CT_U16BE)
293 GENERATE_AMI_CT_16(ami_ct_s16le, AMI_CT_S16LE)
294 GENERATE_AMI_CT_16(ami_ct_u16le, AMI_CT_U16LE)
295 
296 
297 static TRANS transAmiga = {
298 	.ct_ulaw	= ami_ct_ulaw,
299 	.ct_alaw	= ami_ct_alaw,
300 	.ct_s8		= ami_ct_s8,
301 	.ct_u8		= ami_ct_u8,
302 	.ct_s16be	= ami_ct_s16be,
303 	.ct_u16be	= ami_ct_u16be,
304 	.ct_s16le	= ami_ct_s16le,
305 	.ct_u16le	= ami_ct_u16le,
306 };
307 
308 /*** Low level stuff *********************************************************/
309 
310 static inline void StopDMA(void)
311 {
312 	custom.aud[0].audvol = custom.aud[1].audvol = 0;
313 	custom.aud[2].audvol = custom.aud[3].audvol = 0;
314 	custom.dmacon = AMI_AUDIO_OFF;
315 	enable_heartbeat();
316 }
317 
318 static void *AmiAlloc(unsigned int size, gfp_t flags)
319 {
320 	return amiga_chip_alloc((long)size, "dmasound [Paula]");
321 }
322 
323 static void AmiFree(void *obj, unsigned int size)
324 {
325 	amiga_chip_free (obj);
326 }
327 
328 static int __init AmiIrqInit(void)
329 {
330 	/* turn off DMA for audio channels */
331 	StopDMA();
332 
333 	/* Register interrupt handler. */
334 	if (request_irq(IRQ_AMIGA_AUD0, AmiInterrupt, 0, "DMA sound",
335 			AmiInterrupt))
336 		return 0;
337 	return 1;
338 }
339 
340 #ifdef MODULE
341 static void AmiIrqCleanUp(void)
342 {
343 	/* turn off DMA for audio channels */
344 	StopDMA();
345 	/* release the interrupt */
346 	free_irq(IRQ_AMIGA_AUD0, AmiInterrupt);
347 }
348 #endif /* MODULE */
349 
350 static void AmiSilence(void)
351 {
352 	/* turn off DMA for audio channels */
353 	StopDMA();
354 }
355 
356 
357 static void AmiInit(void)
358 {
359 	int period, i;
360 
361 	AmiSilence();
362 
363 	if (dmasound.soft.speed)
364 		period = amiga_colorclock/dmasound.soft.speed-1;
365 	else
366 		period = amiga_audio_min_period;
367 	dmasound.hard = dmasound.soft;
368 	dmasound.trans_write = &transAmiga;
369 
370 	if (period < amiga_audio_min_period) {
371 		/* we would need to squeeze the sound, but we won't do that */
372 		period = amiga_audio_min_period;
373 	} else if (period > 65535) {
374 		period = 65535;
375 	}
376 	dmasound.hard.speed = amiga_colorclock/(period+1);
377 
378 	for (i = 0; i < 4; i++)
379 		custom.aud[i].audper = period;
380 	amiga_audio_period = period;
381 }
382 
383 
384 static int AmiSetFormat(int format)
385 {
386 	int size;
387 
388 	/* Amiga sound DMA supports 8bit and 16bit (pseudo 14 bit) modes */
389 
390 	switch (format) {
391 	case AFMT_QUERY:
392 		return dmasound.soft.format;
393 	case AFMT_MU_LAW:
394 	case AFMT_A_LAW:
395 	case AFMT_U8:
396 	case AFMT_S8:
397 		size = 8;
398 		break;
399 	case AFMT_S16_BE:
400 	case AFMT_U16_BE:
401 	case AFMT_S16_LE:
402 	case AFMT_U16_LE:
403 		size = 16;
404 		break;
405 	default: /* :-) */
406 		size = 8;
407 		format = AFMT_S8;
408 	}
409 
410 	dmasound.soft.format = format;
411 	dmasound.soft.size = size;
412 	if (dmasound.minDev == SND_DEV_DSP) {
413 		dmasound.dsp.format = format;
414 		dmasound.dsp.size = dmasound.soft.size;
415 	}
416 	AmiInit();
417 
418 	return format;
419 }
420 
421 
422 #define VOLUME_VOXWARE_TO_AMI(v) \
423 	(((v) < 0) ? 0 : ((v) > 100) ? 64 : ((v) * 64)/100)
424 #define VOLUME_AMI_TO_VOXWARE(v) ((v)*100/64)
425 
426 static int AmiSetVolume(int volume)
427 {
428 	dmasound.volume_left = VOLUME_VOXWARE_TO_AMI(volume & 0xff);
429 	custom.aud[0].audvol = dmasound.volume_left;
430 	dmasound.volume_right = VOLUME_VOXWARE_TO_AMI((volume & 0xff00) >> 8);
431 	custom.aud[1].audvol = dmasound.volume_right;
432 	if (dmasound.hard.size == 16) {
433 		if (dmasound.volume_left == 64 && dmasound.volume_right == 64) {
434 			custom.aud[2].audvol = 1;
435 			custom.aud[3].audvol = 1;
436 		} else {
437 			custom.aud[2].audvol = 0;
438 			custom.aud[3].audvol = 0;
439 		}
440 	}
441 	return VOLUME_AMI_TO_VOXWARE(dmasound.volume_left) |
442 	       (VOLUME_AMI_TO_VOXWARE(dmasound.volume_right) << 8);
443 }
444 
445 static int AmiSetTreble(int treble)
446 {
447 	dmasound.treble = treble;
448 	if (treble < 50)
449 		ciaa.pra &= ~0x02;
450 	else
451 		ciaa.pra |= 0x02;
452 	return treble;
453 }
454 
455 
456 #define AMI_PLAY_LOADED		1
457 #define AMI_PLAY_PLAYING	2
458 #define AMI_PLAY_MASK		3
459 
460 
461 static void AmiPlayNextFrame(int index)
462 {
463 	u_char *start, *ch0, *ch1, *ch2, *ch3;
464 	u_long size;
465 
466 	/* used by AmiPlay() if all doubts whether there really is something
467 	 * to be played are already wiped out.
468 	 */
469 	start = write_sq.buffers[write_sq.front];
470 	size = (write_sq.count == index ? write_sq.rear_size
471 					: write_sq.block_size)>>1;
472 
473 	if (dmasound.hard.stereo) {
474 		ch0 = start;
475 		ch1 = start+write_sq_block_size_half;
476 		size >>= 1;
477 	} else {
478 		ch0 = start;
479 		ch1 = start;
480 	}
481 
482 	disable_heartbeat();
483 	custom.aud[0].audvol = dmasound.volume_left;
484 	custom.aud[1].audvol = dmasound.volume_right;
485 	if (dmasound.hard.size == 8) {
486 		custom.aud[0].audlc = (u_short *)ZTWO_PADDR(ch0);
487 		custom.aud[0].audlen = size;
488 		custom.aud[1].audlc = (u_short *)ZTWO_PADDR(ch1);
489 		custom.aud[1].audlen = size;
490 		custom.dmacon = AMI_AUDIO_8;
491 	} else {
492 		size >>= 1;
493 		custom.aud[0].audlc = (u_short *)ZTWO_PADDR(ch0);
494 		custom.aud[0].audlen = size;
495 		custom.aud[1].audlc = (u_short *)ZTWO_PADDR(ch1);
496 		custom.aud[1].audlen = size;
497 		if (dmasound.volume_left == 64 && dmasound.volume_right == 64) {
498 			/* We can play pseudo 14-bit only with the maximum volume */
499 			ch3 = ch0+write_sq_block_size_quarter;
500 			ch2 = ch1+write_sq_block_size_quarter;
501 			custom.aud[2].audvol = 1;  /* we are being affected by the beeps */
502 			custom.aud[3].audvol = 1;  /* restoring volume here helps a bit */
503 			custom.aud[2].audlc = (u_short *)ZTWO_PADDR(ch2);
504 			custom.aud[2].audlen = size;
505 			custom.aud[3].audlc = (u_short *)ZTWO_PADDR(ch3);
506 			custom.aud[3].audlen = size;
507 			custom.dmacon = AMI_AUDIO_14;
508 		} else {
509 			custom.aud[2].audvol = 0;
510 			custom.aud[3].audvol = 0;
511 			custom.dmacon = AMI_AUDIO_8;
512 		}
513 	}
514 	write_sq.front = (write_sq.front+1) % write_sq.max_count;
515 	write_sq.active |= AMI_PLAY_LOADED;
516 }
517 
518 
519 static void AmiPlay(void)
520 {
521 	int minframes = 1;
522 
523 	custom.intena = IF_AUD0;
524 
525 	if (write_sq.active & AMI_PLAY_LOADED) {
526 		/* There's already a frame loaded */
527 		custom.intena = IF_SETCLR | IF_AUD0;
528 		return;
529 	}
530 
531 	if (write_sq.active & AMI_PLAY_PLAYING)
532 		/* Increase threshold: frame 1 is already being played */
533 		minframes = 2;
534 
535 	if (write_sq.count < minframes) {
536 		/* Nothing to do */
537 		custom.intena = IF_SETCLR | IF_AUD0;
538 		return;
539 	}
540 
541 	if (write_sq.count <= minframes &&
542 	    write_sq.rear_size < write_sq.block_size && !write_sq.syncing) {
543 		/* hmmm, the only existing frame is not
544 		 * yet filled and we're not syncing?
545 		 */
546 		custom.intena = IF_SETCLR | IF_AUD0;
547 		return;
548 	}
549 
550 	AmiPlayNextFrame(minframes);
551 
552 	custom.intena = IF_SETCLR | IF_AUD0;
553 }
554 
555 
556 static irqreturn_t AmiInterrupt(int irq, void *dummy)
557 {
558 	int minframes = 1;
559 
560 	custom.intena = IF_AUD0;
561 
562 	if (!write_sq.active) {
563 		/* Playing was interrupted and sq_reset() has already cleared
564 		 * the sq variables, so better don't do anything here.
565 		 */
566 		WAKE_UP(write_sq.sync_queue);
567 		return IRQ_HANDLED;
568 	}
569 
570 	if (write_sq.active & AMI_PLAY_PLAYING) {
571 		/* We've just finished a frame */
572 		write_sq.count--;
573 		WAKE_UP(write_sq.action_queue);
574 	}
575 
576 	if (write_sq.active & AMI_PLAY_LOADED)
577 		/* Increase threshold: frame 1 is already being played */
578 		minframes = 2;
579 
580 	/* Shift the flags */
581 	write_sq.active = (write_sq.active<<1) & AMI_PLAY_MASK;
582 
583 	if (!write_sq.active)
584 		/* No frame is playing, disable audio DMA */
585 		StopDMA();
586 
587 	custom.intena = IF_SETCLR | IF_AUD0;
588 
589 	if (write_sq.count >= minframes)
590 		/* Try to play the next frame */
591 		AmiPlay();
592 
593 	if (!write_sq.active)
594 		/* Nothing to play anymore.
595 		   Wake up a process waiting for audio output to drain. */
596 		WAKE_UP(write_sq.sync_queue);
597 	return IRQ_HANDLED;
598 }
599 
600 /*** Mid level stuff *********************************************************/
601 
602 
603 /*
604  * /dev/mixer abstraction
605  */
606 
607 static void __init AmiMixerInit(void)
608 {
609 	dmasound.volume_left = 64;
610 	dmasound.volume_right = 64;
611 	custom.aud[0].audvol = dmasound.volume_left;
612 	custom.aud[3].audvol = 1;	/* For pseudo 14bit */
613 	custom.aud[1].audvol = dmasound.volume_right;
614 	custom.aud[2].audvol = 1;	/* For pseudo 14bit */
615 	dmasound.treble = 50;
616 }
617 
618 static int AmiMixerIoctl(u_int cmd, u_long arg)
619 {
620 	int data;
621 	switch (cmd) {
622 	    case SOUND_MIXER_READ_DEVMASK:
623 		    return IOCTL_OUT(arg, SOUND_MASK_VOLUME | SOUND_MASK_TREBLE);
624 	    case SOUND_MIXER_READ_RECMASK:
625 		    return IOCTL_OUT(arg, 0);
626 	    case SOUND_MIXER_READ_STEREODEVS:
627 		    return IOCTL_OUT(arg, SOUND_MASK_VOLUME);
628 	    case SOUND_MIXER_READ_VOLUME:
629 		    return IOCTL_OUT(arg,
630 			    VOLUME_AMI_TO_VOXWARE(dmasound.volume_left) |
631 			    VOLUME_AMI_TO_VOXWARE(dmasound.volume_right) << 8);
632 	    case SOUND_MIXER_WRITE_VOLUME:
633 		    IOCTL_IN(arg, data);
634 		    return IOCTL_OUT(arg, dmasound_set_volume(data));
635 	    case SOUND_MIXER_READ_TREBLE:
636 		    return IOCTL_OUT(arg, dmasound.treble);
637 	    case SOUND_MIXER_WRITE_TREBLE:
638 		    IOCTL_IN(arg, data);
639 		    return IOCTL_OUT(arg, dmasound_set_treble(data));
640 	}
641 	return -EINVAL;
642 }
643 
644 
645 static int AmiWriteSqSetup(void)
646 {
647 	write_sq_block_size_half = write_sq.block_size>>1;
648 	write_sq_block_size_quarter = write_sq_block_size_half>>1;
649 	return 0;
650 }
651 
652 
653 static int AmiStateInfo(char *buffer, size_t space)
654 {
655 	int len = 0;
656 	len += sprintf(buffer+len, "\tsound.volume_left = %d [0...64]\n",
657 		       dmasound.volume_left);
658 	len += sprintf(buffer+len, "\tsound.volume_right = %d [0...64]\n",
659 		       dmasound.volume_right);
660 	if (len >= space) {
661 		printk(KERN_ERR "dmasound_paula: overflowed state buffer alloc.\n") ;
662 		len = space ;
663 	}
664 	return len;
665 }
666 
667 
668 /*** Machine definitions *****************************************************/
669 
670 static SETTINGS def_hard = {
671 	.format	= AFMT_S8,
672 	.stereo	= 0,
673 	.size	= 8,
674 	.speed	= 8000
675 } ;
676 
677 static SETTINGS def_soft = {
678 	.format	= AFMT_U8,
679 	.stereo	= 0,
680 	.size	= 8,
681 	.speed	= 8000
682 } ;
683 
684 static MACHINE machAmiga = {
685 	.name		= "Amiga",
686 	.name2		= "AMIGA",
687 	.owner		= THIS_MODULE,
688 	.dma_alloc	= AmiAlloc,
689 	.dma_free	= AmiFree,
690 	.irqinit	= AmiIrqInit,
691 #ifdef MODULE
692 	.irqcleanup	= AmiIrqCleanUp,
693 #endif /* MODULE */
694 	.init		= AmiInit,
695 	.silence	= AmiSilence,
696 	.setFormat	= AmiSetFormat,
697 	.setVolume	= AmiSetVolume,
698 	.setTreble	= AmiSetTreble,
699 	.play		= AmiPlay,
700 	.mixer_init	= AmiMixerInit,
701 	.mixer_ioctl	= AmiMixerIoctl,
702 	.write_sq_setup	= AmiWriteSqSetup,
703 	.state_info	= AmiStateInfo,
704 	.min_dsp_speed	= 8000,
705 	.version	= ((DMASOUND_PAULA_REVISION<<8) | DMASOUND_PAULA_EDITION),
706 	.hardware_afmts	= (AFMT_S8 | AFMT_S16_BE), /* h'ware-supported formats *only* here */
707 	.capabilities	= DSP_CAP_BATCH          /* As per SNDCTL_DSP_GETCAPS */
708 };
709 
710 
711 /*** Config & Setup **********************************************************/
712 
713 
714 static int __init amiga_audio_probe(struct platform_device *pdev)
715 {
716 	dmasound.mach = machAmiga;
717 	dmasound.mach.default_hard = def_hard ;
718 	dmasound.mach.default_soft = def_soft ;
719 	return dmasound_init();
720 }
721 
722 static int __exit amiga_audio_remove(struct platform_device *pdev)
723 {
724 	dmasound_deinit();
725 	return 0;
726 }
727 
728 static struct platform_driver amiga_audio_driver = {
729 	.remove = __exit_p(amiga_audio_remove),
730 	.driver   = {
731 		.name	= "amiga-audio",
732 	},
733 };
734 
735 module_platform_driver_probe(amiga_audio_driver, amiga_audio_probe);
736 
737 MODULE_LICENSE("GPL");
738 MODULE_ALIAS("platform:amiga-audio");
739