1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 * Copyright (c) 1998-2002 by Paul Davis <pbd@op.net> 4 */ 5 6 #include <linux/io.h> 7 #include <linux/init.h> 8 #include <linux/time.h> 9 #include <linux/wait.h> 10 #include <linux/slab.h> 11 #include <linux/module.h> 12 #include <linux/firmware.h> 13 #include <sound/core.h> 14 #include <sound/snd_wavefront.h> 15 #include <sound/initval.h> 16 17 /* Control bits for the Load Control Register 18 */ 19 20 #define FX_LSB_TRANSFER 0x01 /* transfer after DSP LSB byte written */ 21 #define FX_MSB_TRANSFER 0x02 /* transfer after DSP MSB byte written */ 22 #define FX_AUTO_INCR 0x04 /* auto-increment DSP address after transfer */ 23 24 #define WAIT_IDLE 0xff 25 26 static int 27 wavefront_fx_idle (snd_wavefront_t *dev) 28 29 { 30 int i; 31 unsigned int x = 0x80; 32 33 for (i = 0; i < 1000; i++) { 34 x = inb (dev->fx_status); 35 if ((x & 0x80) == 0) { 36 break; 37 } 38 } 39 40 if (x & 0x80) { 41 snd_printk ("FX device never idle.\n"); 42 return 0; 43 } 44 45 return (1); 46 } 47 48 static void 49 wavefront_fx_mute (snd_wavefront_t *dev, int onoff) 50 51 { 52 if (!wavefront_fx_idle(dev)) { 53 return; 54 } 55 56 outb (onoff ? 0x02 : 0x00, dev->fx_op); 57 } 58 59 static int 60 wavefront_fx_memset (snd_wavefront_t *dev, 61 int page, 62 int addr, 63 int cnt, 64 unsigned short *data) 65 { 66 if (page < 0 || page > 7) { 67 snd_printk ("FX memset: " 68 "page must be >= 0 and <= 7\n"); 69 return -EINVAL; 70 } 71 72 if (addr < 0 || addr > 0x7f) { 73 snd_printk ("FX memset: " 74 "addr must be >= 0 and <= 7f\n"); 75 return -EINVAL; 76 } 77 78 if (cnt == 1) { 79 80 outb (FX_LSB_TRANSFER, dev->fx_lcr); 81 outb (page, dev->fx_dsp_page); 82 outb (addr, dev->fx_dsp_addr); 83 outb ((data[0] >> 8), dev->fx_dsp_msb); 84 outb ((data[0] & 0xff), dev->fx_dsp_lsb); 85 86 snd_printk ("FX: addr %d:%x set to 0x%x\n", 87 page, addr, data[0]); 88 89 } else { 90 int i; 91 92 outb (FX_AUTO_INCR|FX_LSB_TRANSFER, dev->fx_lcr); 93 outb (page, dev->fx_dsp_page); 94 outb (addr, dev->fx_dsp_addr); 95 96 for (i = 0; i < cnt; i++) { 97 outb ((data[i] >> 8), dev->fx_dsp_msb); 98 outb ((data[i] & 0xff), dev->fx_dsp_lsb); 99 if (!wavefront_fx_idle (dev)) { 100 break; 101 } 102 } 103 104 if (i != cnt) { 105 snd_printk ("FX memset " 106 "(0x%x, 0x%x, 0x%lx, %d) incomplete\n", 107 page, addr, (unsigned long) data, cnt); 108 return -EIO; 109 } 110 } 111 112 return 0; 113 } 114 115 int 116 snd_wavefront_fx_detect (snd_wavefront_t *dev) 117 118 { 119 /* This is a crude check, but its the best one I have for now. 120 Certainly on the Maui and the Tropez, wavefront_fx_idle() will 121 report "never idle", which suggests that this test should 122 work OK. 123 */ 124 125 if (inb (dev->fx_status) & 0x80) { 126 snd_printk ("Hmm, probably a Maui or Tropez.\n"); 127 return -1; 128 } 129 130 return 0; 131 } 132 133 int 134 snd_wavefront_fx_open (struct snd_hwdep *hw, struct file *file) 135 136 { 137 if (!try_module_get(hw->card->module)) 138 return -EFAULT; 139 file->private_data = hw; 140 return 0; 141 } 142 143 int 144 snd_wavefront_fx_release (struct snd_hwdep *hw, struct file *file) 145 146 { 147 module_put(hw->card->module); 148 return 0; 149 } 150 151 int 152 snd_wavefront_fx_ioctl (struct snd_hwdep *sdev, struct file *file, 153 unsigned int cmd, unsigned long arg) 154 155 { 156 struct snd_card *card; 157 snd_wavefront_card_t *acard; 158 snd_wavefront_t *dev; 159 wavefront_fx_info r; 160 unsigned short *page_data = NULL; 161 unsigned short *pd; 162 int err = 0; 163 164 card = sdev->card; 165 if (snd_BUG_ON(!card)) 166 return -ENODEV; 167 if (snd_BUG_ON(!card->private_data)) 168 return -ENODEV; 169 170 acard = card->private_data; 171 dev = &acard->wavefront; 172 173 if (copy_from_user (&r, (void __user *)arg, sizeof (wavefront_fx_info))) 174 return -EFAULT; 175 176 switch (r.request) { 177 case WFFX_MUTE: 178 wavefront_fx_mute (dev, r.data[0]); 179 return -EIO; 180 181 case WFFX_MEMSET: 182 if (r.data[2] <= 0) { 183 snd_printk ("cannot write " 184 "<= 0 bytes to FX\n"); 185 return -EIO; 186 } else if (r.data[2] == 1) { 187 pd = (unsigned short *) &r.data[3]; 188 } else { 189 if (r.data[2] > 256) { 190 snd_printk ("cannot write " 191 "> 512 bytes to FX\n"); 192 return -EIO; 193 } 194 page_data = memdup_user((unsigned char __user *) 195 r.data[3], 196 r.data[2] * sizeof(short)); 197 if (IS_ERR(page_data)) 198 return PTR_ERR(page_data); 199 pd = page_data; 200 } 201 202 err = wavefront_fx_memset (dev, 203 r.data[0], /* page */ 204 r.data[1], /* addr */ 205 r.data[2], /* cnt */ 206 pd); 207 kfree(page_data); 208 break; 209 210 default: 211 snd_printk ("FX: ioctl %d not yet supported\n", 212 r.request); 213 return -ENOTTY; 214 } 215 return err; 216 } 217 218 /* YSS225 initialization. 219 220 This code was developed using DOSEMU. The Turtle Beach SETUPSND 221 utility was run with I/O tracing in DOSEMU enabled, and a reconstruction 222 of the port I/O done, using the Yamaha faxback document as a guide 223 to add more logic to the code. Its really pretty weird. 224 225 This is the approach of just dumping the whole I/O 226 sequence as a series of port/value pairs and a simple loop 227 that outputs it. 228 */ 229 230 int 231 snd_wavefront_fx_start (snd_wavefront_t *dev) 232 { 233 unsigned int i; 234 int err; 235 const struct firmware *firmware = NULL; 236 237 if (dev->fx_initialized) 238 return 0; 239 240 err = request_firmware(&firmware, "yamaha/yss225_registers.bin", 241 dev->card->dev); 242 if (err < 0) { 243 err = -1; 244 goto out; 245 } 246 247 for (i = 0; i + 1 < firmware->size; i += 2) { 248 if (firmware->data[i] >= 8 && firmware->data[i] < 16) { 249 outb(firmware->data[i + 1], 250 dev->base + firmware->data[i]); 251 } else if (firmware->data[i] == WAIT_IDLE) { 252 if (!wavefront_fx_idle(dev)) { 253 err = -1; 254 goto out; 255 } 256 } else { 257 snd_printk(KERN_ERR "invalid address" 258 " in register data\n"); 259 err = -1; 260 goto out; 261 } 262 } 263 264 dev->fx_initialized = 1; 265 err = 0; 266 267 out: 268 release_firmware(firmware); 269 return err; 270 } 271 272 MODULE_FIRMWARE("yamaha/yss225_registers.bin"); 273