1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * HD-audio stream operations 4 */ 5 6 #include <linux/kernel.h> 7 #include <linux/delay.h> 8 #include <linux/export.h> 9 #include <linux/clocksource.h> 10 #include <sound/core.h> 11 #include <sound/pcm.h> 12 #include <sound/hdaudio.h> 13 #include <sound/hda_register.h> 14 #include "trace.h" 15 16 /** 17 * snd_hdac_get_stream_stripe_ctl - get stripe control value 18 * @bus: HD-audio core bus 19 * @substream: PCM substream 20 */ 21 int snd_hdac_get_stream_stripe_ctl(struct hdac_bus *bus, 22 struct snd_pcm_substream *substream) 23 { 24 struct snd_pcm_runtime *runtime = substream->runtime; 25 unsigned int channels = runtime->channels, 26 rate = runtime->rate, 27 bits_per_sample = runtime->sample_bits, 28 max_sdo_lines, value, sdo_line; 29 30 /* T_AZA_GCAP_NSDO is 1:2 bitfields in GCAP */ 31 max_sdo_lines = snd_hdac_chip_readl(bus, GCAP) & AZX_GCAP_NSDO; 32 33 /* following is from HD audio spec */ 34 for (sdo_line = max_sdo_lines; sdo_line > 0; sdo_line >>= 1) { 35 if (rate > 48000) 36 value = (channels * bits_per_sample * 37 (rate / 48000)) / sdo_line; 38 else 39 value = (channels * bits_per_sample) / sdo_line; 40 41 if (value >= bus->sdo_limit) 42 break; 43 } 44 45 /* stripe value: 0 for 1SDO, 1 for 2SDO, 2 for 4SDO lines */ 46 return sdo_line >> 1; 47 } 48 EXPORT_SYMBOL_GPL(snd_hdac_get_stream_stripe_ctl); 49 50 /** 51 * snd_hdac_stream_init - initialize each stream (aka device) 52 * @bus: HD-audio core bus 53 * @azx_dev: HD-audio core stream object to initialize 54 * @idx: stream index number 55 * @direction: stream direction (SNDRV_PCM_STREAM_PLAYBACK or SNDRV_PCM_STREAM_CAPTURE) 56 * @tag: the tag id to assign 57 * 58 * Assign the starting bdl address to each stream (device) and initialize. 59 */ 60 void snd_hdac_stream_init(struct hdac_bus *bus, struct hdac_stream *azx_dev, 61 int idx, int direction, int tag) 62 { 63 azx_dev->bus = bus; 64 /* offset: SDI0=0x80, SDI1=0xa0, ... SDO3=0x160 */ 65 azx_dev->sd_addr = bus->remap_addr + (0x20 * idx + 0x80); 66 /* int mask: SDI0=0x01, SDI1=0x02, ... SDO3=0x80 */ 67 azx_dev->sd_int_sta_mask = 1 << idx; 68 azx_dev->index = idx; 69 azx_dev->direction = direction; 70 azx_dev->stream_tag = tag; 71 snd_hdac_dsp_lock_init(azx_dev); 72 list_add_tail(&azx_dev->list, &bus->stream_list); 73 } 74 EXPORT_SYMBOL_GPL(snd_hdac_stream_init); 75 76 /** 77 * snd_hdac_stream_start - start a stream 78 * @azx_dev: HD-audio core stream to start 79 * @fresh_start: false = wallclock timestamp relative to period wallclock 80 * 81 * Start a stream, set start_wallclk and set the running flag. 82 */ 83 void snd_hdac_stream_start(struct hdac_stream *azx_dev, bool fresh_start) 84 { 85 struct hdac_bus *bus = azx_dev->bus; 86 int stripe_ctl; 87 88 trace_snd_hdac_stream_start(bus, azx_dev); 89 90 azx_dev->start_wallclk = snd_hdac_chip_readl(bus, WALLCLK); 91 if (!fresh_start) 92 azx_dev->start_wallclk -= azx_dev->period_wallclk; 93 94 /* enable SIE */ 95 snd_hdac_chip_updatel(bus, INTCTL, 96 1 << azx_dev->index, 97 1 << azx_dev->index); 98 /* set stripe control */ 99 if (azx_dev->stripe) { 100 if (azx_dev->substream) 101 stripe_ctl = snd_hdac_get_stream_stripe_ctl(bus, azx_dev->substream); 102 else 103 stripe_ctl = 0; 104 snd_hdac_stream_updateb(azx_dev, SD_CTL_3B, SD_CTL_STRIPE_MASK, 105 stripe_ctl); 106 } 107 /* set DMA start and interrupt mask */ 108 snd_hdac_stream_updateb(azx_dev, SD_CTL, 109 0, SD_CTL_DMA_START | SD_INT_MASK); 110 azx_dev->running = true; 111 } 112 EXPORT_SYMBOL_GPL(snd_hdac_stream_start); 113 114 /** 115 * snd_hdac_stream_clear - stop a stream DMA 116 * @azx_dev: HD-audio core stream to stop 117 */ 118 void snd_hdac_stream_clear(struct hdac_stream *azx_dev) 119 { 120 snd_hdac_stream_updateb(azx_dev, SD_CTL, 121 SD_CTL_DMA_START | SD_INT_MASK, 0); 122 snd_hdac_stream_writeb(azx_dev, SD_STS, SD_INT_MASK); /* to be sure */ 123 if (azx_dev->stripe) 124 snd_hdac_stream_updateb(azx_dev, SD_CTL_3B, SD_CTL_STRIPE_MASK, 0); 125 azx_dev->running = false; 126 } 127 EXPORT_SYMBOL_GPL(snd_hdac_stream_clear); 128 129 /** 130 * snd_hdac_stream_stop - stop a stream 131 * @azx_dev: HD-audio core stream to stop 132 * 133 * Stop a stream DMA and disable stream interrupt 134 */ 135 void snd_hdac_stream_stop(struct hdac_stream *azx_dev) 136 { 137 trace_snd_hdac_stream_stop(azx_dev->bus, azx_dev); 138 139 snd_hdac_stream_clear(azx_dev); 140 /* disable SIE */ 141 snd_hdac_chip_updatel(azx_dev->bus, INTCTL, 1 << azx_dev->index, 0); 142 } 143 EXPORT_SYMBOL_GPL(snd_hdac_stream_stop); 144 145 /** 146 * snd_hdac_stream_reset - reset a stream 147 * @azx_dev: HD-audio core stream to reset 148 */ 149 void snd_hdac_stream_reset(struct hdac_stream *azx_dev) 150 { 151 unsigned char val; 152 int timeout; 153 int dma_run_state; 154 155 snd_hdac_stream_clear(azx_dev); 156 157 dma_run_state = snd_hdac_stream_readb(azx_dev, SD_CTL) & SD_CTL_DMA_START; 158 159 snd_hdac_stream_updateb(azx_dev, SD_CTL, 0, SD_CTL_STREAM_RESET); 160 udelay(3); 161 timeout = 300; 162 do { 163 val = snd_hdac_stream_readb(azx_dev, SD_CTL) & 164 SD_CTL_STREAM_RESET; 165 if (val) 166 break; 167 } while (--timeout); 168 169 if (azx_dev->bus->dma_stop_delay && dma_run_state) 170 udelay(azx_dev->bus->dma_stop_delay); 171 172 val &= ~SD_CTL_STREAM_RESET; 173 snd_hdac_stream_writeb(azx_dev, SD_CTL, val); 174 udelay(3); 175 176 timeout = 300; 177 /* waiting for hardware to report that the stream is out of reset */ 178 do { 179 val = snd_hdac_stream_readb(azx_dev, SD_CTL) & 180 SD_CTL_STREAM_RESET; 181 if (!val) 182 break; 183 } while (--timeout); 184 185 /* reset first position - may not be synced with hw at this time */ 186 if (azx_dev->posbuf) 187 *azx_dev->posbuf = 0; 188 } 189 EXPORT_SYMBOL_GPL(snd_hdac_stream_reset); 190 191 /** 192 * snd_hdac_stream_setup - set up the SD for streaming 193 * @azx_dev: HD-audio core stream to set up 194 */ 195 int snd_hdac_stream_setup(struct hdac_stream *azx_dev) 196 { 197 struct hdac_bus *bus = azx_dev->bus; 198 struct snd_pcm_runtime *runtime; 199 unsigned int val; 200 201 if (azx_dev->substream) 202 runtime = azx_dev->substream->runtime; 203 else 204 runtime = NULL; 205 /* make sure the run bit is zero for SD */ 206 snd_hdac_stream_clear(azx_dev); 207 /* program the stream_tag */ 208 val = snd_hdac_stream_readl(azx_dev, SD_CTL); 209 val = (val & ~SD_CTL_STREAM_TAG_MASK) | 210 (azx_dev->stream_tag << SD_CTL_STREAM_TAG_SHIFT); 211 if (!bus->snoop) 212 val |= SD_CTL_TRAFFIC_PRIO; 213 snd_hdac_stream_writel(azx_dev, SD_CTL, val); 214 215 /* program the length of samples in cyclic buffer */ 216 snd_hdac_stream_writel(azx_dev, SD_CBL, azx_dev->bufsize); 217 218 /* program the stream format */ 219 /* this value needs to be the same as the one programmed */ 220 snd_hdac_stream_writew(azx_dev, SD_FORMAT, azx_dev->format_val); 221 222 /* program the stream LVI (last valid index) of the BDL */ 223 snd_hdac_stream_writew(azx_dev, SD_LVI, azx_dev->frags - 1); 224 225 /* program the BDL address */ 226 /* lower BDL address */ 227 snd_hdac_stream_writel(azx_dev, SD_BDLPL, (u32)azx_dev->bdl.addr); 228 /* upper BDL address */ 229 snd_hdac_stream_writel(azx_dev, SD_BDLPU, 230 upper_32_bits(azx_dev->bdl.addr)); 231 232 /* enable the position buffer */ 233 if (bus->use_posbuf && bus->posbuf.addr) { 234 if (!(snd_hdac_chip_readl(bus, DPLBASE) & AZX_DPLBASE_ENABLE)) 235 snd_hdac_chip_writel(bus, DPLBASE, 236 (u32)bus->posbuf.addr | AZX_DPLBASE_ENABLE); 237 } 238 239 /* set the interrupt enable bits in the descriptor control register */ 240 snd_hdac_stream_updatel(azx_dev, SD_CTL, 0, SD_INT_MASK); 241 242 azx_dev->fifo_size = snd_hdac_stream_readw(azx_dev, SD_FIFOSIZE) + 1; 243 244 /* when LPIB delay correction gives a small negative value, 245 * we ignore it; currently set the threshold statically to 246 * 64 frames 247 */ 248 if (runtime && runtime->period_size > 64) 249 azx_dev->delay_negative_threshold = 250 -frames_to_bytes(runtime, 64); 251 else 252 azx_dev->delay_negative_threshold = 0; 253 254 /* wallclk has 24Mhz clock source */ 255 if (runtime) 256 azx_dev->period_wallclk = (((runtime->period_size * 24000) / 257 runtime->rate) * 1000); 258 259 return 0; 260 } 261 EXPORT_SYMBOL_GPL(snd_hdac_stream_setup); 262 263 /** 264 * snd_hdac_stream_cleanup - cleanup a stream 265 * @azx_dev: HD-audio core stream to clean up 266 */ 267 void snd_hdac_stream_cleanup(struct hdac_stream *azx_dev) 268 { 269 snd_hdac_stream_writel(azx_dev, SD_BDLPL, 0); 270 snd_hdac_stream_writel(azx_dev, SD_BDLPU, 0); 271 snd_hdac_stream_writel(azx_dev, SD_CTL, 0); 272 azx_dev->bufsize = 0; 273 azx_dev->period_bytes = 0; 274 azx_dev->format_val = 0; 275 } 276 EXPORT_SYMBOL_GPL(snd_hdac_stream_cleanup); 277 278 /** 279 * snd_hdac_stream_assign - assign a stream for the PCM 280 * @bus: HD-audio core bus 281 * @substream: PCM substream to assign 282 * 283 * Look for an unused stream for the given PCM substream, assign it 284 * and return the stream object. If no stream is free, returns NULL. 285 * The function tries to keep using the same stream object when it's used 286 * beforehand. Also, when bus->reverse_assign flag is set, the last free 287 * or matching entry is returned. This is needed for some strange codecs. 288 */ 289 struct hdac_stream *snd_hdac_stream_assign(struct hdac_bus *bus, 290 struct snd_pcm_substream *substream) 291 { 292 struct hdac_stream *azx_dev; 293 struct hdac_stream *res = NULL; 294 295 /* make a non-zero unique key for the substream */ 296 int key = (substream->pcm->device << 16) | (substream->number << 2) | 297 (substream->stream + 1); 298 299 spin_lock_irq(&bus->reg_lock); 300 list_for_each_entry(azx_dev, &bus->stream_list, list) { 301 if (azx_dev->direction != substream->stream) 302 continue; 303 if (azx_dev->opened) 304 continue; 305 if (azx_dev->assigned_key == key) { 306 res = azx_dev; 307 break; 308 } 309 if (!res || bus->reverse_assign) 310 res = azx_dev; 311 } 312 if (res) { 313 res->opened = 1; 314 res->running = 0; 315 res->assigned_key = key; 316 res->substream = substream; 317 } 318 spin_unlock_irq(&bus->reg_lock); 319 return res; 320 } 321 EXPORT_SYMBOL_GPL(snd_hdac_stream_assign); 322 323 /** 324 * snd_hdac_stream_release - release the assigned stream 325 * @azx_dev: HD-audio core stream to release 326 * 327 * Release the stream that has been assigned by snd_hdac_stream_assign(). 328 */ 329 void snd_hdac_stream_release(struct hdac_stream *azx_dev) 330 { 331 struct hdac_bus *bus = azx_dev->bus; 332 333 spin_lock_irq(&bus->reg_lock); 334 azx_dev->opened = 0; 335 azx_dev->running = 0; 336 azx_dev->substream = NULL; 337 spin_unlock_irq(&bus->reg_lock); 338 } 339 EXPORT_SYMBOL_GPL(snd_hdac_stream_release); 340 341 /** 342 * snd_hdac_get_stream - return hdac_stream based on stream_tag and 343 * direction 344 * 345 * @bus: HD-audio core bus 346 * @dir: direction for the stream to be found 347 * @stream_tag: stream tag for stream to be found 348 */ 349 struct hdac_stream *snd_hdac_get_stream(struct hdac_bus *bus, 350 int dir, int stream_tag) 351 { 352 struct hdac_stream *s; 353 354 list_for_each_entry(s, &bus->stream_list, list) { 355 if (s->direction == dir && s->stream_tag == stream_tag) 356 return s; 357 } 358 359 return NULL; 360 } 361 EXPORT_SYMBOL_GPL(snd_hdac_get_stream); 362 363 /* 364 * set up a BDL entry 365 */ 366 static int setup_bdle(struct hdac_bus *bus, 367 struct snd_dma_buffer *dmab, 368 struct hdac_stream *azx_dev, __le32 **bdlp, 369 int ofs, int size, int with_ioc) 370 { 371 __le32 *bdl = *bdlp; 372 373 while (size > 0) { 374 dma_addr_t addr; 375 int chunk; 376 377 if (azx_dev->frags >= AZX_MAX_BDL_ENTRIES) 378 return -EINVAL; 379 380 addr = snd_sgbuf_get_addr(dmab, ofs); 381 /* program the address field of the BDL entry */ 382 bdl[0] = cpu_to_le32((u32)addr); 383 bdl[1] = cpu_to_le32(upper_32_bits(addr)); 384 /* program the size field of the BDL entry */ 385 chunk = snd_sgbuf_get_chunk_size(dmab, ofs, size); 386 /* one BDLE cannot cross 4K boundary on CTHDA chips */ 387 if (bus->align_bdle_4k) { 388 u32 remain = 0x1000 - (ofs & 0xfff); 389 390 if (chunk > remain) 391 chunk = remain; 392 } 393 bdl[2] = cpu_to_le32(chunk); 394 /* program the IOC to enable interrupt 395 * only when the whole fragment is processed 396 */ 397 size -= chunk; 398 bdl[3] = (size || !with_ioc) ? 0 : cpu_to_le32(0x01); 399 bdl += 4; 400 azx_dev->frags++; 401 ofs += chunk; 402 } 403 *bdlp = bdl; 404 return ofs; 405 } 406 407 /** 408 * snd_hdac_stream_setup_periods - set up BDL entries 409 * @azx_dev: HD-audio core stream to set up 410 * 411 * Set up the buffer descriptor table of the given stream based on the 412 * period and buffer sizes of the assigned PCM substream. 413 */ 414 int snd_hdac_stream_setup_periods(struct hdac_stream *azx_dev) 415 { 416 struct hdac_bus *bus = azx_dev->bus; 417 struct snd_pcm_substream *substream = azx_dev->substream; 418 struct snd_pcm_runtime *runtime = substream->runtime; 419 __le32 *bdl; 420 int i, ofs, periods, period_bytes; 421 int pos_adj, pos_align; 422 423 /* reset BDL address */ 424 snd_hdac_stream_writel(azx_dev, SD_BDLPL, 0); 425 snd_hdac_stream_writel(azx_dev, SD_BDLPU, 0); 426 427 period_bytes = azx_dev->period_bytes; 428 periods = azx_dev->bufsize / period_bytes; 429 430 /* program the initial BDL entries */ 431 bdl = (__le32 *)azx_dev->bdl.area; 432 ofs = 0; 433 azx_dev->frags = 0; 434 435 pos_adj = bus->bdl_pos_adj; 436 if (!azx_dev->no_period_wakeup && pos_adj > 0) { 437 pos_align = pos_adj; 438 pos_adj = DIV_ROUND_UP(pos_adj * runtime->rate, 48000); 439 if (!pos_adj) 440 pos_adj = pos_align; 441 else 442 pos_adj = roundup(pos_adj, pos_align); 443 pos_adj = frames_to_bytes(runtime, pos_adj); 444 if (pos_adj >= period_bytes) { 445 dev_warn(bus->dev, "Too big adjustment %d\n", 446 pos_adj); 447 pos_adj = 0; 448 } else { 449 ofs = setup_bdle(bus, snd_pcm_get_dma_buf(substream), 450 azx_dev, 451 &bdl, ofs, pos_adj, true); 452 if (ofs < 0) 453 goto error; 454 } 455 } else 456 pos_adj = 0; 457 458 for (i = 0; i < periods; i++) { 459 if (i == periods - 1 && pos_adj) 460 ofs = setup_bdle(bus, snd_pcm_get_dma_buf(substream), 461 azx_dev, &bdl, ofs, 462 period_bytes - pos_adj, 0); 463 else 464 ofs = setup_bdle(bus, snd_pcm_get_dma_buf(substream), 465 azx_dev, &bdl, ofs, 466 period_bytes, 467 !azx_dev->no_period_wakeup); 468 if (ofs < 0) 469 goto error; 470 } 471 return 0; 472 473 error: 474 dev_err(bus->dev, "Too many BDL entries: buffer=%d, period=%d\n", 475 azx_dev->bufsize, period_bytes); 476 return -EINVAL; 477 } 478 EXPORT_SYMBOL_GPL(snd_hdac_stream_setup_periods); 479 480 /** 481 * snd_hdac_stream_set_params - set stream parameters 482 * @azx_dev: HD-audio core stream for which parameters are to be set 483 * @format_val: format value parameter 484 * 485 * Setup the HD-audio core stream parameters from substream of the stream 486 * and passed format value 487 */ 488 int snd_hdac_stream_set_params(struct hdac_stream *azx_dev, 489 unsigned int format_val) 490 { 491 492 unsigned int bufsize, period_bytes; 493 struct snd_pcm_substream *substream = azx_dev->substream; 494 struct snd_pcm_runtime *runtime; 495 int err; 496 497 if (!substream) 498 return -EINVAL; 499 runtime = substream->runtime; 500 bufsize = snd_pcm_lib_buffer_bytes(substream); 501 period_bytes = snd_pcm_lib_period_bytes(substream); 502 503 if (bufsize != azx_dev->bufsize || 504 period_bytes != azx_dev->period_bytes || 505 format_val != azx_dev->format_val || 506 runtime->no_period_wakeup != azx_dev->no_period_wakeup) { 507 azx_dev->bufsize = bufsize; 508 azx_dev->period_bytes = period_bytes; 509 azx_dev->format_val = format_val; 510 azx_dev->no_period_wakeup = runtime->no_period_wakeup; 511 err = snd_hdac_stream_setup_periods(azx_dev); 512 if (err < 0) 513 return err; 514 } 515 return 0; 516 } 517 EXPORT_SYMBOL_GPL(snd_hdac_stream_set_params); 518 519 static u64 azx_cc_read(const struct cyclecounter *cc) 520 { 521 struct hdac_stream *azx_dev = container_of(cc, struct hdac_stream, cc); 522 523 return snd_hdac_chip_readl(azx_dev->bus, WALLCLK); 524 } 525 526 static void azx_timecounter_init(struct hdac_stream *azx_dev, 527 bool force, u64 last) 528 { 529 struct timecounter *tc = &azx_dev->tc; 530 struct cyclecounter *cc = &azx_dev->cc; 531 u64 nsec; 532 533 cc->read = azx_cc_read; 534 cc->mask = CLOCKSOURCE_MASK(32); 535 536 /* 537 * Converting from 24 MHz to ns means applying a 125/3 factor. 538 * To avoid any saturation issues in intermediate operations, 539 * the 125 factor is applied first. The division is applied 540 * last after reading the timecounter value. 541 * Applying the 1/3 factor as part of the multiplication 542 * requires at least 20 bits for a decent precision, however 543 * overflows occur after about 4 hours or less, not a option. 544 */ 545 546 cc->mult = 125; /* saturation after 195 years */ 547 cc->shift = 0; 548 549 nsec = 0; /* audio time is elapsed time since trigger */ 550 timecounter_init(tc, cc, nsec); 551 if (force) { 552 /* 553 * force timecounter to use predefined value, 554 * used for synchronized starts 555 */ 556 tc->cycle_last = last; 557 } 558 } 559 560 /** 561 * snd_hdac_stream_timecounter_init - initialize time counter 562 * @azx_dev: HD-audio core stream (master stream) 563 * @streams: bit flags of streams to set up 564 * 565 * Initializes the time counter of streams marked by the bit flags (each 566 * bit corresponds to the stream index). 567 * The trigger timestamp of PCM substream assigned to the given stream is 568 * updated accordingly, too. 569 */ 570 void snd_hdac_stream_timecounter_init(struct hdac_stream *azx_dev, 571 unsigned int streams) 572 { 573 struct hdac_bus *bus = azx_dev->bus; 574 struct snd_pcm_runtime *runtime = azx_dev->substream->runtime; 575 struct hdac_stream *s; 576 bool inited = false; 577 u64 cycle_last = 0; 578 int i = 0; 579 580 list_for_each_entry(s, &bus->stream_list, list) { 581 if (streams & (1 << i)) { 582 azx_timecounter_init(s, inited, cycle_last); 583 if (!inited) { 584 inited = true; 585 cycle_last = s->tc.cycle_last; 586 } 587 } 588 i++; 589 } 590 591 snd_pcm_gettime(runtime, &runtime->trigger_tstamp); 592 runtime->trigger_tstamp_latched = true; 593 } 594 EXPORT_SYMBOL_GPL(snd_hdac_stream_timecounter_init); 595 596 /** 597 * snd_hdac_stream_sync_trigger - turn on/off stream sync register 598 * @azx_dev: HD-audio core stream (master stream) 599 * @set: true = set, false = clear 600 * @streams: bit flags of streams to sync 601 * @reg: the stream sync register address 602 */ 603 void snd_hdac_stream_sync_trigger(struct hdac_stream *azx_dev, bool set, 604 unsigned int streams, unsigned int reg) 605 { 606 struct hdac_bus *bus = azx_dev->bus; 607 unsigned int val; 608 609 if (!reg) 610 reg = AZX_REG_SSYNC; 611 val = _snd_hdac_chip_readl(bus, reg); 612 if (set) 613 val |= streams; 614 else 615 val &= ~streams; 616 _snd_hdac_chip_writel(bus, reg, val); 617 } 618 EXPORT_SYMBOL_GPL(snd_hdac_stream_sync_trigger); 619 620 /** 621 * snd_hdac_stream_sync - sync with start/stop trigger operation 622 * @azx_dev: HD-audio core stream (master stream) 623 * @start: true = start, false = stop 624 * @streams: bit flags of streams to sync 625 * 626 * For @start = true, wait until all FIFOs get ready. 627 * For @start = false, wait until all RUN bits are cleared. 628 */ 629 void snd_hdac_stream_sync(struct hdac_stream *azx_dev, bool start, 630 unsigned int streams) 631 { 632 struct hdac_bus *bus = azx_dev->bus; 633 int i, nwait, timeout; 634 struct hdac_stream *s; 635 636 for (timeout = 5000; timeout; timeout--) { 637 nwait = 0; 638 i = 0; 639 list_for_each_entry(s, &bus->stream_list, list) { 640 if (!(streams & (1 << i++))) 641 continue; 642 643 if (start) { 644 /* check FIFO gets ready */ 645 if (!(snd_hdac_stream_readb(s, SD_STS) & 646 SD_STS_FIFO_READY)) 647 nwait++; 648 } else { 649 /* check RUN bit is cleared */ 650 if (snd_hdac_stream_readb(s, SD_CTL) & 651 SD_CTL_DMA_START) { 652 nwait++; 653 /* 654 * Perform stream reset if DMA RUN 655 * bit not cleared within given timeout 656 */ 657 if (timeout == 1) 658 snd_hdac_stream_reset(s); 659 } 660 } 661 } 662 if (!nwait) 663 break; 664 cpu_relax(); 665 } 666 } 667 EXPORT_SYMBOL_GPL(snd_hdac_stream_sync); 668 669 #ifdef CONFIG_SND_HDA_DSP_LOADER 670 /** 671 * snd_hdac_dsp_prepare - prepare for DSP loading 672 * @azx_dev: HD-audio core stream used for DSP loading 673 * @format: HD-audio stream format 674 * @byte_size: data chunk byte size 675 * @bufp: allocated buffer 676 * 677 * Allocate the buffer for the given size and set up the given stream for 678 * DSP loading. Returns the stream tag (>= 0), or a negative error code. 679 */ 680 int snd_hdac_dsp_prepare(struct hdac_stream *azx_dev, unsigned int format, 681 unsigned int byte_size, struct snd_dma_buffer *bufp) 682 { 683 struct hdac_bus *bus = azx_dev->bus; 684 __le32 *bdl; 685 int err; 686 687 snd_hdac_dsp_lock(azx_dev); 688 spin_lock_irq(&bus->reg_lock); 689 if (azx_dev->running || azx_dev->locked) { 690 spin_unlock_irq(&bus->reg_lock); 691 err = -EBUSY; 692 goto unlock; 693 } 694 azx_dev->locked = true; 695 spin_unlock_irq(&bus->reg_lock); 696 697 err = snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV_SG, bus->dev, 698 byte_size, bufp); 699 if (err < 0) 700 goto err_alloc; 701 702 azx_dev->substream = NULL; 703 azx_dev->bufsize = byte_size; 704 azx_dev->period_bytes = byte_size; 705 azx_dev->format_val = format; 706 707 snd_hdac_stream_reset(azx_dev); 708 709 /* reset BDL address */ 710 snd_hdac_stream_writel(azx_dev, SD_BDLPL, 0); 711 snd_hdac_stream_writel(azx_dev, SD_BDLPU, 0); 712 713 azx_dev->frags = 0; 714 bdl = (__le32 *)azx_dev->bdl.area; 715 err = setup_bdle(bus, bufp, azx_dev, &bdl, 0, byte_size, 0); 716 if (err < 0) 717 goto error; 718 719 snd_hdac_stream_setup(azx_dev); 720 snd_hdac_dsp_unlock(azx_dev); 721 return azx_dev->stream_tag; 722 723 error: 724 snd_dma_free_pages(bufp); 725 err_alloc: 726 spin_lock_irq(&bus->reg_lock); 727 azx_dev->locked = false; 728 spin_unlock_irq(&bus->reg_lock); 729 unlock: 730 snd_hdac_dsp_unlock(azx_dev); 731 return err; 732 } 733 EXPORT_SYMBOL_GPL(snd_hdac_dsp_prepare); 734 735 /** 736 * snd_hdac_dsp_trigger - start / stop DSP loading 737 * @azx_dev: HD-audio core stream used for DSP loading 738 * @start: trigger start or stop 739 */ 740 void snd_hdac_dsp_trigger(struct hdac_stream *azx_dev, bool start) 741 { 742 if (start) 743 snd_hdac_stream_start(azx_dev, true); 744 else 745 snd_hdac_stream_stop(azx_dev); 746 } 747 EXPORT_SYMBOL_GPL(snd_hdac_dsp_trigger); 748 749 /** 750 * snd_hdac_dsp_cleanup - clean up the stream from DSP loading to normal 751 * @azx_dev: HD-audio core stream used for DSP loading 752 * @dmab: buffer used by DSP loading 753 */ 754 void snd_hdac_dsp_cleanup(struct hdac_stream *azx_dev, 755 struct snd_dma_buffer *dmab) 756 { 757 struct hdac_bus *bus = azx_dev->bus; 758 759 if (!dmab->area || !azx_dev->locked) 760 return; 761 762 snd_hdac_dsp_lock(azx_dev); 763 /* reset BDL address */ 764 snd_hdac_stream_writel(azx_dev, SD_BDLPL, 0); 765 snd_hdac_stream_writel(azx_dev, SD_BDLPU, 0); 766 snd_hdac_stream_writel(azx_dev, SD_CTL, 0); 767 azx_dev->bufsize = 0; 768 azx_dev->period_bytes = 0; 769 azx_dev->format_val = 0; 770 771 snd_dma_free_pages(dmab); 772 dmab->area = NULL; 773 774 spin_lock_irq(&bus->reg_lock); 775 azx_dev->locked = false; 776 spin_unlock_irq(&bus->reg_lock); 777 snd_hdac_dsp_unlock(azx_dev); 778 } 779 EXPORT_SYMBOL_GPL(snd_hdac_dsp_cleanup); 780 #endif /* CONFIG_SND_HDA_DSP_LOADER */ 781