1 /*
2  * bebob_stream.c - a part of driver for BeBoB based devices
3  *
4  * Copyright (c) 2013-2014 Takashi Sakamoto
5  *
6  * Licensed under the terms of the GNU General Public License, version 2.
7  */
8 
9 #include "./bebob.h"
10 
11 #define CALLBACK_TIMEOUT	2000
12 #define FW_ISO_RESOURCE_DELAY	1000
13 
14 /*
15  * NOTE;
16  * For BeBoB streams, Both of input and output CMP connection are important.
17  *
18  * For most devices, each CMP connection starts to transmit/receive a
19  * corresponding stream. But for a few devices, both of CMP connection needs
20  * to start transmitting stream. An example is 'M-Audio Firewire 410'.
21  */
22 
23 /* 128 is an arbitrary length but it seems to be enough */
24 #define FORMAT_MAXIMUM_LENGTH 128
25 
26 const unsigned int snd_bebob_rate_table[SND_BEBOB_STRM_FMT_ENTRIES] = {
27 	[0] = 32000,
28 	[1] = 44100,
29 	[2] = 48000,
30 	[3] = 88200,
31 	[4] = 96000,
32 	[5] = 176400,
33 	[6] = 192000,
34 };
35 
36 /*
37  * See: Table 51: Extended Stream Format Info ‘Sampling Frequency’
38  * in Additional AVC commands (Nov 2003, BridgeCo)
39  */
40 static const unsigned int bridgeco_freq_table[] = {
41 	[0] = 0x02,
42 	[1] = 0x03,
43 	[2] = 0x04,
44 	[3] = 0x0a,
45 	[4] = 0x05,
46 	[5] = 0x06,
47 	[6] = 0x07,
48 };
49 
50 static unsigned int
51 get_formation_index(unsigned int rate)
52 {
53 	unsigned int i;
54 
55 	for (i = 0; i < ARRAY_SIZE(snd_bebob_rate_table); i++) {
56 		if (snd_bebob_rate_table[i] == rate)
57 			return i;
58 	}
59 	return -EINVAL;
60 }
61 
62 int
63 snd_bebob_stream_get_rate(struct snd_bebob *bebob, unsigned int *curr_rate)
64 {
65 	unsigned int tx_rate, rx_rate, trials;
66 	int err;
67 
68 	trials = 0;
69 	do {
70 		err = avc_general_get_sig_fmt(bebob->unit, &tx_rate,
71 					      AVC_GENERAL_PLUG_DIR_OUT, 0);
72 	} while (err == -EAGAIN && ++trials < 3);
73 	if (err < 0)
74 		goto end;
75 
76 	trials = 0;
77 	do {
78 		err = avc_general_get_sig_fmt(bebob->unit, &rx_rate,
79 					      AVC_GENERAL_PLUG_DIR_IN, 0);
80 	} while (err == -EAGAIN && ++trials < 3);
81 	if (err < 0)
82 		goto end;
83 
84 	*curr_rate = rx_rate;
85 	if (rx_rate == tx_rate)
86 		goto end;
87 
88 	/* synchronize receive stream rate to transmit stream rate */
89 	err = avc_general_set_sig_fmt(bebob->unit, rx_rate,
90 				      AVC_GENERAL_PLUG_DIR_IN, 0);
91 end:
92 	return err;
93 }
94 
95 int
96 snd_bebob_stream_set_rate(struct snd_bebob *bebob, unsigned int rate)
97 {
98 	int err;
99 
100 	err = avc_general_set_sig_fmt(bebob->unit, rate,
101 				      AVC_GENERAL_PLUG_DIR_OUT, 0);
102 	if (err < 0)
103 		goto end;
104 
105 	err = avc_general_set_sig_fmt(bebob->unit, rate,
106 				      AVC_GENERAL_PLUG_DIR_IN, 0);
107 	if (err < 0)
108 		goto end;
109 
110 	/*
111 	 * Some devices need a bit time for transition.
112 	 * 300msec is got by some experiments.
113 	 */
114 	msleep(300);
115 end:
116 	return err;
117 }
118 
119 int snd_bebob_stream_get_clock_src(struct snd_bebob *bebob,
120 				   enum snd_bebob_clock_type *src)
121 {
122 	const struct snd_bebob_clock_spec *clk_spec = bebob->spec->clock;
123 	u8 addr[AVC_BRIDGECO_ADDR_BYTES], input[7];
124 	unsigned int id;
125 	enum avc_bridgeco_plug_type type;
126 	int err = 0;
127 
128 	/* 1.The device has its own operation to switch source of clock */
129 	if (clk_spec) {
130 		err = clk_spec->get(bebob, &id);
131 		if (err < 0) {
132 			dev_err(&bebob->unit->device,
133 				"fail to get clock source: %d\n", err);
134 			goto end;
135 		}
136 
137 		if (id >= clk_spec->num) {
138 			dev_err(&bebob->unit->device,
139 				"clock source %d out of range 0..%d\n",
140 				id, clk_spec->num - 1);
141 			err = -EIO;
142 			goto end;
143 		}
144 
145 		*src = clk_spec->types[id];
146 		goto end;
147 	}
148 
149 	/*
150 	 * 2.The device don't support to switch source of clock then assumed
151 	 *   to use internal clock always
152 	 */
153 	if (bebob->sync_input_plug < 0) {
154 		*src = SND_BEBOB_CLOCK_TYPE_INTERNAL;
155 		goto end;
156 	}
157 
158 	/*
159 	 * 3.The device supports to switch source of clock by an usual way.
160 	 *   Let's check input for 'Music Sub Unit Sync Input' plug.
161 	 */
162 	avc_bridgeco_fill_msu_addr(addr, AVC_BRIDGECO_PLUG_DIR_IN,
163 				   bebob->sync_input_plug);
164 	err = avc_bridgeco_get_plug_input(bebob->unit, addr, input);
165 	if (err < 0) {
166 		dev_err(&bebob->unit->device,
167 			"fail to get an input for MSU in plug %d: %d\n",
168 			bebob->sync_input_plug, err);
169 		goto end;
170 	}
171 
172 	/*
173 	 * If there are no input plugs, all of fields are 0xff.
174 	 * Here check the first field. This field is used for direction.
175 	 */
176 	if (input[0] == 0xff) {
177 		*src = SND_BEBOB_CLOCK_TYPE_INTERNAL;
178 		goto end;
179 	}
180 
181 	/* The source from any output plugs is for one purpose only. */
182 	if (input[0] == AVC_BRIDGECO_PLUG_DIR_OUT) {
183 		/*
184 		 * In BeBoB architecture, the source from music subunit may
185 		 * bypass from oPCR[0]. This means that this source gives
186 		 * synchronization to IEEE 1394 cycle start packet.
187 		 */
188 		if (input[1] == AVC_BRIDGECO_PLUG_MODE_SUBUNIT &&
189 		    input[2] == 0x0c) {
190 			*src = SND_BEBOB_CLOCK_TYPE_INTERNAL;
191 			goto end;
192 		}
193 	/* The source from any input units is for several purposes. */
194 	} else if (input[1] == AVC_BRIDGECO_PLUG_MODE_UNIT) {
195 		if (input[2] == AVC_BRIDGECO_PLUG_UNIT_ISOC) {
196 			if (input[3] == 0x00) {
197 				/*
198 				 * This source comes from iPCR[0]. This means
199 				 * that presentation timestamp calculated by
200 				 * SYT series of the received packets. In
201 				 * short, this driver is the master of
202 				 * synchronization.
203 				 */
204 				*src = SND_BEBOB_CLOCK_TYPE_SYT;
205 				goto end;
206 			} else {
207 				/*
208 				 * This source comes from iPCR[1-29]. This
209 				 * means that the synchronization stream is not
210 				 * the Audio/MIDI compound stream.
211 				 */
212 				*src = SND_BEBOB_CLOCK_TYPE_EXTERNAL;
213 				goto end;
214 			}
215 		} else if (input[2] == AVC_BRIDGECO_PLUG_UNIT_EXT) {
216 			/* Check type of this plug.  */
217 			avc_bridgeco_fill_unit_addr(addr,
218 						    AVC_BRIDGECO_PLUG_DIR_IN,
219 						    AVC_BRIDGECO_PLUG_UNIT_EXT,
220 						    input[3]);
221 			err = avc_bridgeco_get_plug_type(bebob->unit, addr,
222 							 &type);
223 			if (err < 0)
224 				goto end;
225 
226 			if (type == AVC_BRIDGECO_PLUG_TYPE_DIG) {
227 				/*
228 				 * SPDIF/ADAT or sometimes (not always) word
229 				 * clock.
230 				 */
231 				*src = SND_BEBOB_CLOCK_TYPE_EXTERNAL;
232 				goto end;
233 			} else if (type == AVC_BRIDGECO_PLUG_TYPE_SYNC) {
234 				/* Often word clock. */
235 				*src = SND_BEBOB_CLOCK_TYPE_EXTERNAL;
236 				goto end;
237 			} else if (type == AVC_BRIDGECO_PLUG_TYPE_ADDITION) {
238 				/*
239 				 * Not standard.
240 				 * Mostly, additional internal clock.
241 				 */
242 				*src = SND_BEBOB_CLOCK_TYPE_INTERNAL;
243 				goto end;
244 			}
245 		}
246 	}
247 
248 	/* Not supported. */
249 	err = -EIO;
250 end:
251 	return err;
252 }
253 
254 static unsigned int
255 map_data_channels(struct snd_bebob *bebob, struct amdtp_stream *s)
256 {
257 	unsigned int sec, sections, ch, channels;
258 	unsigned int pcm, midi, location;
259 	unsigned int stm_pos, sec_loc, pos;
260 	u8 *buf, addr[AVC_BRIDGECO_ADDR_BYTES], type;
261 	enum avc_bridgeco_plug_dir dir;
262 	int err;
263 
264 	/*
265 	 * The length of return value of this command cannot be expected. Here
266 	 * use the maximum length of FCP.
267 	 */
268 	buf = kzalloc(256, GFP_KERNEL);
269 	if (buf == NULL)
270 		return -ENOMEM;
271 
272 	if (s == &bebob->tx_stream)
273 		dir = AVC_BRIDGECO_PLUG_DIR_OUT;
274 	else
275 		dir = AVC_BRIDGECO_PLUG_DIR_IN;
276 
277 	avc_bridgeco_fill_unit_addr(addr, dir, AVC_BRIDGECO_PLUG_UNIT_ISOC, 0);
278 	err = avc_bridgeco_get_plug_ch_pos(bebob->unit, addr, buf, 256);
279 	if (err < 0) {
280 		dev_err(&bebob->unit->device,
281 			"fail to get channel position for isoc %s plug 0: %d\n",
282 			(dir == AVC_BRIDGECO_PLUG_DIR_IN) ? "in" : "out",
283 			err);
284 		goto end;
285 	}
286 	pos = 0;
287 
288 	/* positions in I/O buffer */
289 	pcm = 0;
290 	midi = 0;
291 
292 	/* the number of sections in AMDTP packet */
293 	sections = buf[pos++];
294 
295 	for (sec = 0; sec < sections; sec++) {
296 		/* type of this section */
297 		avc_bridgeco_fill_unit_addr(addr, dir,
298 					    AVC_BRIDGECO_PLUG_UNIT_ISOC, 0);
299 		err = avc_bridgeco_get_plug_section_type(bebob->unit, addr,
300 							 sec, &type);
301 		if (err < 0) {
302 			dev_err(&bebob->unit->device,
303 			"fail to get section type for isoc %s plug 0: %d\n",
304 				(dir == AVC_BRIDGECO_PLUG_DIR_IN) ? "in" :
305 								    "out",
306 				err);
307 			goto end;
308 		}
309 		/* NoType */
310 		if (type == 0xff) {
311 			err = -ENOSYS;
312 			goto end;
313 		}
314 
315 		/* the number of channels in this section */
316 		channels = buf[pos++];
317 
318 		for (ch = 0; ch < channels; ch++) {
319 			/* position of this channel in AMDTP packet */
320 			stm_pos = buf[pos++] - 1;
321 			/* location of this channel in this section */
322 			sec_loc = buf[pos++] - 1;
323 
324 			/*
325 			 * Basically the number of location is within the
326 			 * number of channels in this section. But some models
327 			 * of M-Audio don't follow this. Its location for MIDI
328 			 * is the position of MIDI channels in AMDTP packet.
329 			 */
330 			if (sec_loc >= channels)
331 				sec_loc = ch;
332 
333 			switch (type) {
334 			/* for MIDI conformant data channel */
335 			case 0x0a:
336 				/* AMDTP_MAX_CHANNELS_FOR_MIDI is 1. */
337 				if ((midi > 0) && (stm_pos != midi)) {
338 					err = -ENOSYS;
339 					goto end;
340 				}
341 				amdtp_am824_set_midi_position(s, stm_pos);
342 				midi = stm_pos;
343 				break;
344 			/* for PCM data channel */
345 			case 0x01:	/* Headphone */
346 			case 0x02:	/* Microphone */
347 			case 0x03:	/* Line */
348 			case 0x04:	/* SPDIF */
349 			case 0x05:	/* ADAT */
350 			case 0x06:	/* TDIF */
351 			case 0x07:	/* MADI */
352 			/* for undefined/changeable signal  */
353 			case 0x08:	/* Analog */
354 			case 0x09:	/* Digital */
355 			default:
356 				location = pcm + sec_loc;
357 				if (location >= AM824_MAX_CHANNELS_FOR_PCM) {
358 					err = -ENOSYS;
359 					goto end;
360 				}
361 				amdtp_am824_set_pcm_position(s, location,
362 							     stm_pos);
363 				break;
364 			}
365 		}
366 
367 		if (type != 0x0a)
368 			pcm += channels;
369 		else
370 			midi += channels;
371 	}
372 end:
373 	kfree(buf);
374 	return err;
375 }
376 
377 static int
378 init_both_connections(struct snd_bebob *bebob)
379 {
380 	int err;
381 
382 	err = cmp_connection_init(&bebob->in_conn,
383 				  bebob->unit, CMP_INPUT, 0);
384 	if (err < 0)
385 		goto end;
386 
387 	err = cmp_connection_init(&bebob->out_conn,
388 				  bebob->unit, CMP_OUTPUT, 0);
389 	if (err < 0)
390 		cmp_connection_destroy(&bebob->in_conn);
391 end:
392 	return err;
393 }
394 
395 static int
396 check_connection_used_by_others(struct snd_bebob *bebob, struct amdtp_stream *s)
397 {
398 	struct cmp_connection *conn;
399 	bool used;
400 	int err;
401 
402 	if (s == &bebob->tx_stream)
403 		conn = &bebob->out_conn;
404 	else
405 		conn = &bebob->in_conn;
406 
407 	err = cmp_connection_check_used(conn, &used);
408 	if ((err >= 0) && used && !amdtp_stream_running(s)) {
409 		dev_err(&bebob->unit->device,
410 			"Connection established by others: %cPCR[%d]\n",
411 			(conn->direction == CMP_OUTPUT) ? 'o' : 'i',
412 			conn->pcr_index);
413 		err = -EBUSY;
414 	}
415 
416 	return err;
417 }
418 
419 static int
420 make_both_connections(struct snd_bebob *bebob, unsigned int rate)
421 {
422 	int index, pcm_channels, midi_channels, err = 0;
423 
424 	if (bebob->connected)
425 		goto end;
426 
427 	/* confirm params for both streams */
428 	index = get_formation_index(rate);
429 	pcm_channels = bebob->tx_stream_formations[index].pcm;
430 	midi_channels = bebob->tx_stream_formations[index].midi;
431 	err = amdtp_am824_set_parameters(&bebob->tx_stream, rate,
432 					 pcm_channels, midi_channels * 8,
433 					 false);
434 	if (err < 0)
435 		goto end;
436 
437 	pcm_channels = bebob->rx_stream_formations[index].pcm;
438 	midi_channels = bebob->rx_stream_formations[index].midi;
439 	err = amdtp_am824_set_parameters(&bebob->rx_stream, rate,
440 					 pcm_channels, midi_channels * 8,
441 					 false);
442 	if (err < 0)
443 		goto end;
444 
445 	/* establish connections for both streams */
446 	err = cmp_connection_establish(&bebob->out_conn,
447 			amdtp_stream_get_max_payload(&bebob->tx_stream));
448 	if (err < 0)
449 		goto end;
450 	err = cmp_connection_establish(&bebob->in_conn,
451 			amdtp_stream_get_max_payload(&bebob->rx_stream));
452 	if (err < 0) {
453 		cmp_connection_break(&bebob->out_conn);
454 		goto end;
455 	}
456 
457 	bebob->connected = true;
458 end:
459 	return err;
460 }
461 
462 static void
463 break_both_connections(struct snd_bebob *bebob)
464 {
465 	cmp_connection_break(&bebob->in_conn);
466 	cmp_connection_break(&bebob->out_conn);
467 
468 	bebob->connected = false;
469 
470 	/* These models seems to be in transition state for a longer time. */
471 	if (bebob->maudio_special_quirk != NULL)
472 		msleep(200);
473 }
474 
475 static void
476 destroy_both_connections(struct snd_bebob *bebob)
477 {
478 	cmp_connection_destroy(&bebob->in_conn);
479 	cmp_connection_destroy(&bebob->out_conn);
480 }
481 
482 static int
483 get_sync_mode(struct snd_bebob *bebob, enum cip_flags *sync_mode)
484 {
485 	enum snd_bebob_clock_type src;
486 	int err;
487 
488 	err = snd_bebob_stream_get_clock_src(bebob, &src);
489 	if (err < 0)
490 		return err;
491 
492 	switch (src) {
493 	case SND_BEBOB_CLOCK_TYPE_INTERNAL:
494 	case SND_BEBOB_CLOCK_TYPE_EXTERNAL:
495 		*sync_mode = CIP_SYNC_TO_DEVICE;
496 		break;
497 	default:
498 	case SND_BEBOB_CLOCK_TYPE_SYT:
499 		*sync_mode = 0;
500 		break;
501 	}
502 
503 	return 0;
504 }
505 
506 static int
507 start_stream(struct snd_bebob *bebob, struct amdtp_stream *stream,
508 	     unsigned int rate)
509 {
510 	struct cmp_connection *conn;
511 	int err = 0;
512 
513 	if (stream == &bebob->rx_stream)
514 		conn = &bebob->in_conn;
515 	else
516 		conn = &bebob->out_conn;
517 
518 	/* channel mapping */
519 	if (bebob->maudio_special_quirk == NULL) {
520 		err = map_data_channels(bebob, stream);
521 		if (err < 0)
522 			goto end;
523 	}
524 
525 	/* start amdtp stream */
526 	err = amdtp_stream_start(stream,
527 				 conn->resources.channel,
528 				 conn->speed);
529 end:
530 	return err;
531 }
532 
533 int snd_bebob_stream_init_duplex(struct snd_bebob *bebob)
534 {
535 	int err;
536 
537 	err = init_both_connections(bebob);
538 	if (err < 0)
539 		goto end;
540 
541 	err = amdtp_am824_init(&bebob->tx_stream, bebob->unit,
542 			       AMDTP_IN_STREAM, CIP_BLOCKING);
543 	if (err < 0) {
544 		amdtp_stream_destroy(&bebob->tx_stream);
545 		destroy_both_connections(bebob);
546 		goto end;
547 	}
548 	/* See comments in next function */
549 	init_completion(&bebob->bus_reset);
550 	bebob->tx_stream.flags |= CIP_SKIP_INIT_DBC_CHECK;
551 
552 	/*
553 	 * BeBoB v3 transfers packets with these qurks:
554 	 *  - In the beginning of streaming, the value of dbc is incremented
555 	 *    even if no data blocks are transferred.
556 	 *  - The value of dbc is reset suddenly.
557 	 */
558 	if (bebob->version > 2)
559 		bebob->tx_stream.flags |= CIP_EMPTY_HAS_WRONG_DBC |
560 					  CIP_SKIP_DBC_ZERO_CHECK;
561 
562 	/*
563 	 * At high sampling rate, M-Audio special firmware transmits empty
564 	 * packet with the value of dbc incremented by 8 but the others are
565 	 * valid to IEC 61883-1.
566 	 */
567 	if (bebob->maudio_special_quirk)
568 		bebob->tx_stream.flags |= CIP_EMPTY_HAS_WRONG_DBC;
569 
570 	err = amdtp_am824_init(&bebob->rx_stream, bebob->unit,
571 			       AMDTP_OUT_STREAM, CIP_BLOCKING);
572 	if (err < 0) {
573 		amdtp_stream_destroy(&bebob->tx_stream);
574 		amdtp_stream_destroy(&bebob->rx_stream);
575 		destroy_both_connections(bebob);
576 	}
577 end:
578 	return err;
579 }
580 
581 int snd_bebob_stream_start_duplex(struct snd_bebob *bebob, unsigned int rate)
582 {
583 	const struct snd_bebob_rate_spec *rate_spec = bebob->spec->rate;
584 	struct amdtp_stream *master, *slave;
585 	enum cip_flags sync_mode;
586 	unsigned int curr_rate;
587 	bool updated = false;
588 	int err = 0;
589 
590 	/*
591 	 * Normal BeBoB firmware has a quirk at bus reset to transmits packets
592 	 * with discontinuous value in dbc field.
593 	 *
594 	 * This 'struct completion' is used to call .update() at first to update
595 	 * connections/streams. Next following codes handle streaming error.
596 	 */
597 	if (amdtp_streaming_error(&bebob->tx_stream)) {
598 		if (completion_done(&bebob->bus_reset))
599 			reinit_completion(&bebob->bus_reset);
600 
601 		updated = (wait_for_completion_interruptible_timeout(
602 				&bebob->bus_reset,
603 				msecs_to_jiffies(FW_ISO_RESOURCE_DELAY)) > 0);
604 	}
605 
606 	mutex_lock(&bebob->mutex);
607 
608 	/* Need no substreams */
609 	if (atomic_read(&bebob->substreams_counter) == 0)
610 		goto end;
611 
612 	err = get_sync_mode(bebob, &sync_mode);
613 	if (err < 0)
614 		goto end;
615 	if (sync_mode == CIP_SYNC_TO_DEVICE) {
616 		master = &bebob->tx_stream;
617 		slave  = &bebob->rx_stream;
618 	} else {
619 		master = &bebob->rx_stream;
620 		slave  = &bebob->tx_stream;
621 	}
622 
623 	/*
624 	 * Considering JACK/FFADO streaming:
625 	 * TODO: This can be removed hwdep functionality becomes popular.
626 	 */
627 	err = check_connection_used_by_others(bebob, master);
628 	if (err < 0)
629 		goto end;
630 
631 	/*
632 	 * packet queueing error or detecting discontinuity
633 	 *
634 	 * At bus reset, connections should not be broken here. So streams need
635 	 * to be re-started. This is a reason to use SKIP_INIT_DBC_CHECK flag.
636 	 */
637 	if (amdtp_streaming_error(master))
638 		amdtp_stream_stop(master);
639 	if (amdtp_streaming_error(slave))
640 		amdtp_stream_stop(slave);
641 	if (!updated &&
642 	    !amdtp_stream_running(master) && !amdtp_stream_running(slave))
643 		break_both_connections(bebob);
644 
645 	/* stop streams if rate is different */
646 	err = rate_spec->get(bebob, &curr_rate);
647 	if (err < 0) {
648 		dev_err(&bebob->unit->device,
649 			"fail to get sampling rate: %d\n", err);
650 		goto end;
651 	}
652 	if (rate == 0)
653 		rate = curr_rate;
654 	if (rate != curr_rate) {
655 		amdtp_stream_stop(master);
656 		amdtp_stream_stop(slave);
657 		break_both_connections(bebob);
658 	}
659 
660 	/* master should be always running */
661 	if (!amdtp_stream_running(master)) {
662 		amdtp_stream_set_sync(sync_mode, master, slave);
663 		bebob->master = master;
664 
665 		/*
666 		 * NOTE:
667 		 * If establishing connections at first, Yamaha GO46
668 		 * (and maybe Terratec X24) don't generate sound.
669 		 *
670 		 * For firmware customized by M-Audio, refer to next NOTE.
671 		 */
672 		if (bebob->maudio_special_quirk == NULL) {
673 			err = rate_spec->set(bebob, rate);
674 			if (err < 0) {
675 				dev_err(&bebob->unit->device,
676 					"fail to set sampling rate: %d\n",
677 					err);
678 				goto end;
679 			}
680 		}
681 
682 		err = make_both_connections(bebob, rate);
683 		if (err < 0)
684 			goto end;
685 
686 		err = start_stream(bebob, master, rate);
687 		if (err < 0) {
688 			dev_err(&bebob->unit->device,
689 				"fail to run AMDTP master stream:%d\n", err);
690 			break_both_connections(bebob);
691 			goto end;
692 		}
693 
694 		/*
695 		 * NOTE:
696 		 * The firmware customized by M-Audio uses these commands to
697 		 * start transmitting stream. This is not usual way.
698 		 */
699 		if (bebob->maudio_special_quirk != NULL) {
700 			err = rate_spec->set(bebob, rate);
701 			if (err < 0) {
702 				dev_err(&bebob->unit->device,
703 					"fail to ensure sampling rate: %d\n",
704 					err);
705 				amdtp_stream_stop(master);
706 				break_both_connections(bebob);
707 				goto end;
708 			}
709 		}
710 
711 		/* wait first callback */
712 		if (!amdtp_stream_wait_callback(master, CALLBACK_TIMEOUT)) {
713 			amdtp_stream_stop(master);
714 			break_both_connections(bebob);
715 			err = -ETIMEDOUT;
716 			goto end;
717 		}
718 	}
719 
720 	/* start slave if needed */
721 	if (!amdtp_stream_running(slave)) {
722 		err = start_stream(bebob, slave, rate);
723 		if (err < 0) {
724 			dev_err(&bebob->unit->device,
725 				"fail to run AMDTP slave stream:%d\n", err);
726 			amdtp_stream_stop(master);
727 			break_both_connections(bebob);
728 			goto end;
729 		}
730 
731 		/* wait first callback */
732 		if (!amdtp_stream_wait_callback(slave, CALLBACK_TIMEOUT)) {
733 			amdtp_stream_stop(slave);
734 			amdtp_stream_stop(master);
735 			break_both_connections(bebob);
736 			err = -ETIMEDOUT;
737 		}
738 	}
739 end:
740 	mutex_unlock(&bebob->mutex);
741 	return err;
742 }
743 
744 void snd_bebob_stream_stop_duplex(struct snd_bebob *bebob)
745 {
746 	struct amdtp_stream *master, *slave;
747 
748 	if (bebob->master == &bebob->rx_stream) {
749 		slave  = &bebob->tx_stream;
750 		master = &bebob->rx_stream;
751 	} else {
752 		slave  = &bebob->rx_stream;
753 		master = &bebob->tx_stream;
754 	}
755 
756 	mutex_lock(&bebob->mutex);
757 
758 	if (atomic_read(&bebob->substreams_counter) == 0) {
759 		amdtp_stream_pcm_abort(master);
760 		amdtp_stream_stop(master);
761 
762 		amdtp_stream_pcm_abort(slave);
763 		amdtp_stream_stop(slave);
764 
765 		break_both_connections(bebob);
766 	}
767 
768 	mutex_unlock(&bebob->mutex);
769 }
770 
771 void snd_bebob_stream_update_duplex(struct snd_bebob *bebob)
772 {
773 	/* vs. XRUN recovery due to discontinuity at bus reset */
774 	mutex_lock(&bebob->mutex);
775 
776 	if ((cmp_connection_update(&bebob->in_conn) < 0) ||
777 	    (cmp_connection_update(&bebob->out_conn) < 0)) {
778 		amdtp_stream_pcm_abort(&bebob->rx_stream);
779 		amdtp_stream_pcm_abort(&bebob->tx_stream);
780 		amdtp_stream_stop(&bebob->rx_stream);
781 		amdtp_stream_stop(&bebob->tx_stream);
782 		break_both_connections(bebob);
783 	} else {
784 		amdtp_stream_update(&bebob->rx_stream);
785 		amdtp_stream_update(&bebob->tx_stream);
786 	}
787 
788 	/* wake up stream_start_duplex() */
789 	if (!completion_done(&bebob->bus_reset))
790 		complete_all(&bebob->bus_reset);
791 
792 	mutex_unlock(&bebob->mutex);
793 }
794 
795 /*
796  * This function should be called before starting streams or after stopping
797  * streams.
798  */
799 void snd_bebob_stream_destroy_duplex(struct snd_bebob *bebob)
800 {
801 	amdtp_stream_destroy(&bebob->rx_stream);
802 	amdtp_stream_destroy(&bebob->tx_stream);
803 
804 	destroy_both_connections(bebob);
805 }
806 
807 /*
808  * See: Table 50: Extended Stream Format Info Format Hierarchy Level 2’
809  * in Additional AVC commands (Nov 2003, BridgeCo)
810  * Also 'Clause 12 AM824 sequence adaption layers' in IEC 61883-6:2005
811  */
812 static int
813 parse_stream_formation(u8 *buf, unsigned int len,
814 		       struct snd_bebob_stream_formation *formation)
815 {
816 	unsigned int i, e, channels, format;
817 
818 	/*
819 	 * this module can support a hierarchy combination that:
820 	 *  Root:	Audio and Music (0x90)
821 	 *  Level 1:	AM824 Compound  (0x40)
822 	 */
823 	if ((buf[0] != 0x90) || (buf[1] != 0x40))
824 		return -ENOSYS;
825 
826 	/* check sampling rate */
827 	for (i = 0; i < ARRAY_SIZE(bridgeco_freq_table); i++) {
828 		if (buf[2] == bridgeco_freq_table[i])
829 			break;
830 	}
831 	if (i == ARRAY_SIZE(bridgeco_freq_table))
832 		return -ENOSYS;
833 
834 	/* Avoid double count by different entries for the same rate. */
835 	memset(&formation[i], 0, sizeof(struct snd_bebob_stream_formation));
836 
837 	for (e = 0; e < buf[4]; e++) {
838 		channels = buf[5 + e * 2];
839 		format = buf[6 + e * 2];
840 
841 		switch (format) {
842 		/* IEC 60958 Conformant, currently handled as MBLA */
843 		case 0x00:
844 		/* Multi bit linear audio */
845 		case 0x06:	/* Raw */
846 			formation[i].pcm += channels;
847 			break;
848 		/* MIDI Conformant */
849 		case 0x0d:
850 			formation[i].midi += channels;
851 			break;
852 		/* IEC 61937-3 to 7 */
853 		case 0x01:
854 		case 0x02:
855 		case 0x03:
856 		case 0x04:
857 		case 0x05:
858 		/* Multi bit linear audio */
859 		case 0x07:	/* DVD-Audio */
860 		case 0x0c:	/* High Precision */
861 		/* One Bit Audio */
862 		case 0x08:	/* (Plain) Raw */
863 		case 0x09:	/* (Plain) SACD */
864 		case 0x0a:	/* (Encoded) Raw */
865 		case 0x0b:	/* (Encoded) SACD */
866 		/* Synchronization Stream (Stereo Raw audio) */
867 		case 0x40:
868 		/* Don't care */
869 		case 0xff:
870 		default:
871 			return -ENOSYS;	/* not supported */
872 		}
873 	}
874 
875 	if (formation[i].pcm  > AM824_MAX_CHANNELS_FOR_PCM ||
876 	    formation[i].midi > AM824_MAX_CHANNELS_FOR_MIDI)
877 		return -ENOSYS;
878 
879 	return 0;
880 }
881 
882 static int
883 fill_stream_formations(struct snd_bebob *bebob, enum avc_bridgeco_plug_dir dir,
884 		       unsigned short pid)
885 {
886 	u8 *buf;
887 	struct snd_bebob_stream_formation *formations;
888 	unsigned int len, eid;
889 	u8 addr[AVC_BRIDGECO_ADDR_BYTES];
890 	int err;
891 
892 	buf = kmalloc(FORMAT_MAXIMUM_LENGTH, GFP_KERNEL);
893 	if (buf == NULL)
894 		return -ENOMEM;
895 
896 	if (dir == AVC_BRIDGECO_PLUG_DIR_IN)
897 		formations = bebob->rx_stream_formations;
898 	else
899 		formations = bebob->tx_stream_formations;
900 
901 	for (eid = 0; eid < SND_BEBOB_STRM_FMT_ENTRIES; eid++) {
902 		len = FORMAT_MAXIMUM_LENGTH;
903 		avc_bridgeco_fill_unit_addr(addr, dir,
904 					    AVC_BRIDGECO_PLUG_UNIT_ISOC, pid);
905 		err = avc_bridgeco_get_plug_strm_fmt(bebob->unit, addr, buf,
906 						     &len, eid);
907 		/* No entries remained. */
908 		if (err == -EINVAL && eid > 0) {
909 			err = 0;
910 			break;
911 		} else if (err < 0) {
912 			dev_err(&bebob->unit->device,
913 			"fail to get stream format %d for isoc %s plug %d:%d\n",
914 				eid,
915 				(dir == AVC_BRIDGECO_PLUG_DIR_IN) ? "in" :
916 								    "out",
917 				pid, err);
918 			break;
919 		}
920 
921 		err = parse_stream_formation(buf, len, formations);
922 		if (err < 0)
923 			break;
924 	}
925 
926 	kfree(buf);
927 	return err;
928 }
929 
930 static int
931 seek_msu_sync_input_plug(struct snd_bebob *bebob)
932 {
933 	u8 plugs[AVC_PLUG_INFO_BUF_BYTES], addr[AVC_BRIDGECO_ADDR_BYTES];
934 	unsigned int i;
935 	enum avc_bridgeco_plug_type type;
936 	int err;
937 
938 	/* Get the number of Music Sub Unit for both direction. */
939 	err = avc_general_get_plug_info(bebob->unit, 0x0c, 0x00, 0x00, plugs);
940 	if (err < 0) {
941 		dev_err(&bebob->unit->device,
942 			"fail to get info for MSU in/out plugs: %d\n",
943 			err);
944 		goto end;
945 	}
946 
947 	/* seek destination plugs for 'MSU sync input' */
948 	bebob->sync_input_plug = -1;
949 	for (i = 0; i < plugs[0]; i++) {
950 		avc_bridgeco_fill_msu_addr(addr, AVC_BRIDGECO_PLUG_DIR_IN, i);
951 		err = avc_bridgeco_get_plug_type(bebob->unit, addr, &type);
952 		if (err < 0) {
953 			dev_err(&bebob->unit->device,
954 				"fail to get type for MSU in plug %d: %d\n",
955 				i, err);
956 			goto end;
957 		}
958 
959 		if (type == AVC_BRIDGECO_PLUG_TYPE_SYNC) {
960 			bebob->sync_input_plug = i;
961 			break;
962 		}
963 	}
964 end:
965 	return err;
966 }
967 
968 int snd_bebob_stream_discover(struct snd_bebob *bebob)
969 {
970 	const struct snd_bebob_clock_spec *clk_spec = bebob->spec->clock;
971 	u8 plugs[AVC_PLUG_INFO_BUF_BYTES], addr[AVC_BRIDGECO_ADDR_BYTES];
972 	enum avc_bridgeco_plug_type type;
973 	unsigned int i;
974 	int err;
975 
976 	/* the number of plugs for isoc in/out, ext in/out  */
977 	err = avc_general_get_plug_info(bebob->unit, 0x1f, 0x07, 0x00, plugs);
978 	if (err < 0) {
979 		dev_err(&bebob->unit->device,
980 		"fail to get info for isoc/external in/out plugs: %d\n",
981 			err);
982 		goto end;
983 	}
984 
985 	/*
986 	 * This module supports at least one isoc input plug and one isoc
987 	 * output plug.
988 	 */
989 	if ((plugs[0] == 0) || (plugs[1] == 0)) {
990 		err = -ENOSYS;
991 		goto end;
992 	}
993 
994 	avc_bridgeco_fill_unit_addr(addr, AVC_BRIDGECO_PLUG_DIR_IN,
995 				    AVC_BRIDGECO_PLUG_UNIT_ISOC, 0);
996 	err = avc_bridgeco_get_plug_type(bebob->unit, addr, &type);
997 	if (err < 0) {
998 		dev_err(&bebob->unit->device,
999 			"fail to get type for isoc in plug 0: %d\n", err);
1000 		goto end;
1001 	} else if (type != AVC_BRIDGECO_PLUG_TYPE_ISOC) {
1002 		err = -ENOSYS;
1003 		goto end;
1004 	}
1005 	err = fill_stream_formations(bebob, AVC_BRIDGECO_PLUG_DIR_IN, 0);
1006 	if (err < 0)
1007 		goto end;
1008 
1009 	avc_bridgeco_fill_unit_addr(addr, AVC_BRIDGECO_PLUG_DIR_OUT,
1010 				    AVC_BRIDGECO_PLUG_UNIT_ISOC, 0);
1011 	err = avc_bridgeco_get_plug_type(bebob->unit, addr, &type);
1012 	if (err < 0) {
1013 		dev_err(&bebob->unit->device,
1014 			"fail to get type for isoc out plug 0: %d\n", err);
1015 		goto end;
1016 	} else if (type != AVC_BRIDGECO_PLUG_TYPE_ISOC) {
1017 		err = -ENOSYS;
1018 		goto end;
1019 	}
1020 	err = fill_stream_formations(bebob, AVC_BRIDGECO_PLUG_DIR_OUT, 0);
1021 	if (err < 0)
1022 		goto end;
1023 
1024 	/* count external input plugs for MIDI */
1025 	bebob->midi_input_ports = 0;
1026 	for (i = 0; i < plugs[2]; i++) {
1027 		avc_bridgeco_fill_unit_addr(addr, AVC_BRIDGECO_PLUG_DIR_IN,
1028 					    AVC_BRIDGECO_PLUG_UNIT_EXT, i);
1029 		err = avc_bridgeco_get_plug_type(bebob->unit, addr, &type);
1030 		if (err < 0) {
1031 			dev_err(&bebob->unit->device,
1032 			"fail to get type for external in plug %d: %d\n",
1033 				i, err);
1034 			goto end;
1035 		} else if (type == AVC_BRIDGECO_PLUG_TYPE_MIDI) {
1036 			bebob->midi_input_ports++;
1037 		}
1038 	}
1039 
1040 	/* count external output plugs for MIDI */
1041 	bebob->midi_output_ports = 0;
1042 	for (i = 0; i < plugs[3]; i++) {
1043 		avc_bridgeco_fill_unit_addr(addr, AVC_BRIDGECO_PLUG_DIR_OUT,
1044 					    AVC_BRIDGECO_PLUG_UNIT_EXT, i);
1045 		err = avc_bridgeco_get_plug_type(bebob->unit, addr, &type);
1046 		if (err < 0) {
1047 			dev_err(&bebob->unit->device,
1048 			"fail to get type for external out plug %d: %d\n",
1049 				i, err);
1050 			goto end;
1051 		} else if (type == AVC_BRIDGECO_PLUG_TYPE_MIDI) {
1052 			bebob->midi_output_ports++;
1053 		}
1054 	}
1055 
1056 	/* for check source of clock later */
1057 	if (!clk_spec)
1058 		err = seek_msu_sync_input_plug(bebob);
1059 end:
1060 	return err;
1061 }
1062 
1063 void snd_bebob_stream_lock_changed(struct snd_bebob *bebob)
1064 {
1065 	bebob->dev_lock_changed = true;
1066 	wake_up(&bebob->hwdep_wait);
1067 }
1068 
1069 int snd_bebob_stream_lock_try(struct snd_bebob *bebob)
1070 {
1071 	int err;
1072 
1073 	spin_lock_irq(&bebob->lock);
1074 
1075 	/* user land lock this */
1076 	if (bebob->dev_lock_count < 0) {
1077 		err = -EBUSY;
1078 		goto end;
1079 	}
1080 
1081 	/* this is the first time */
1082 	if (bebob->dev_lock_count++ == 0)
1083 		snd_bebob_stream_lock_changed(bebob);
1084 	err = 0;
1085 end:
1086 	spin_unlock_irq(&bebob->lock);
1087 	return err;
1088 }
1089 
1090 void snd_bebob_stream_lock_release(struct snd_bebob *bebob)
1091 {
1092 	spin_lock_irq(&bebob->lock);
1093 
1094 	if (WARN_ON(bebob->dev_lock_count <= 0))
1095 		goto end;
1096 	if (--bebob->dev_lock_count == 0)
1097 		snd_bebob_stream_lock_changed(bebob);
1098 end:
1099 	spin_unlock_irq(&bebob->lock);
1100 }
1101