1 /* 2 * serial.c 3 * Copyright (c) by Jaroslav Kysela <perex@perex.cz>, 4 * Isaku Yamahata <yamahata@private.email.ne.jp>, 5 * George Hansper <ghansper@apana.org.au>, 6 * Hannu Savolainen 7 * 8 * This code is based on the code from ALSA 0.5.9, but heavily rewritten. 9 * 10 * This program is free software; you can redistribute it and/or modify 11 * it under the terms of the GNU General Public License as published by 12 * the Free Software Foundation; either version 2 of the License, or 13 * (at your option) any later version. 14 * 15 * This program is distributed in the hope that it will be useful, 16 * but WITHOUT ANY WARRANTY; without even the implied warranty of 17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 18 * GNU General Public License for more details. 19 * 20 * You should have received a copy of the GNU General Public License 21 * along with this program; if not, write to the Free Software 22 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA 23 * 24 * Sat Mar 31 17:27:57 PST 2001 tim.mann@compaq.com 25 * Added support for the Midiator MS-124T and for the MS-124W in 26 * Single Addressed (S/A) or Multiple Burst (M/B) mode, with 27 * power derived either parasitically from the serial port or 28 * from a separate power supply. 29 * 30 * More documentation can be found in serial-u16550.txt. 31 */ 32 33 #include <linux/init.h> 34 #include <linux/interrupt.h> 35 #include <linux/err.h> 36 #include <linux/platform_device.h> 37 #include <linux/slab.h> 38 #include <linux/ioport.h> 39 #include <linux/module.h> 40 #include <linux/io.h> 41 #include <sound/core.h> 42 #include <sound/rawmidi.h> 43 #include <sound/initval.h> 44 45 #include <linux/serial_reg.h> 46 #include <linux/jiffies.h> 47 48 MODULE_DESCRIPTION("MIDI serial u16550"); 49 MODULE_LICENSE("GPL"); 50 MODULE_SUPPORTED_DEVICE("{{ALSA, MIDI serial u16550}}"); 51 52 #define SNDRV_SERIAL_SOUNDCANVAS 0 /* Roland Soundcanvas; F5 NN selects part */ 53 #define SNDRV_SERIAL_MS124T 1 /* Midiator MS-124T */ 54 #define SNDRV_SERIAL_MS124W_SA 2 /* Midiator MS-124W in S/A mode */ 55 #define SNDRV_SERIAL_MS124W_MB 3 /* Midiator MS-124W in M/B mode */ 56 #define SNDRV_SERIAL_GENERIC 4 /* Generic Interface */ 57 #define SNDRV_SERIAL_MAX_ADAPTOR SNDRV_SERIAL_GENERIC 58 static char *adaptor_names[] = { 59 "Soundcanvas", 60 "MS-124T", 61 "MS-124W S/A", 62 "MS-124W M/B", 63 "Generic" 64 }; 65 66 #define SNDRV_SERIAL_NORMALBUFF 0 /* Normal blocking buffer operation */ 67 #define SNDRV_SERIAL_DROPBUFF 1 /* Non-blocking discard operation */ 68 69 static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; /* Index 0-MAX */ 70 static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR; /* ID for this card */ 71 static bool enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE; /* Enable this card */ 72 static long port[SNDRV_CARDS] = SNDRV_DEFAULT_PORT; /* 0x3f8,0x2f8,0x3e8,0x2e8 */ 73 static int irq[SNDRV_CARDS] = SNDRV_DEFAULT_IRQ; /* 3,4,5,7,9,10,11,14,15 */ 74 static int speed[SNDRV_CARDS] = {[0 ... (SNDRV_CARDS - 1)] = 38400}; /* 9600,19200,38400,57600,115200 */ 75 static int base[SNDRV_CARDS] = {[0 ... (SNDRV_CARDS - 1)] = 115200}; /* baud base */ 76 static int outs[SNDRV_CARDS] = {[0 ... (SNDRV_CARDS - 1)] = 1}; /* 1 to 16 */ 77 static int ins[SNDRV_CARDS] = {[0 ... (SNDRV_CARDS - 1)] = 1}; /* 1 to 16 */ 78 static int adaptor[SNDRV_CARDS] = {[0 ... (SNDRV_CARDS - 1)] = SNDRV_SERIAL_SOUNDCANVAS}; 79 static bool droponfull[SNDRV_CARDS] = {[0 ... (SNDRV_CARDS -1)] = SNDRV_SERIAL_NORMALBUFF }; 80 81 module_param_array(index, int, NULL, 0444); 82 MODULE_PARM_DESC(index, "Index value for Serial MIDI."); 83 module_param_array(id, charp, NULL, 0444); 84 MODULE_PARM_DESC(id, "ID string for Serial MIDI."); 85 module_param_array(enable, bool, NULL, 0444); 86 MODULE_PARM_DESC(enable, "Enable UART16550A chip."); 87 module_param_array(port, long, NULL, 0444); 88 MODULE_PARM_DESC(port, "Port # for UART16550A chip."); 89 module_param_array(irq, int, NULL, 0444); 90 MODULE_PARM_DESC(irq, "IRQ # for UART16550A chip."); 91 module_param_array(speed, int, NULL, 0444); 92 MODULE_PARM_DESC(speed, "Speed in bauds."); 93 module_param_array(base, int, NULL, 0444); 94 MODULE_PARM_DESC(base, "Base for divisor in bauds."); 95 module_param_array(outs, int, NULL, 0444); 96 MODULE_PARM_DESC(outs, "Number of MIDI outputs."); 97 module_param_array(ins, int, NULL, 0444); 98 MODULE_PARM_DESC(ins, "Number of MIDI inputs."); 99 module_param_array(droponfull, bool, NULL, 0444); 100 MODULE_PARM_DESC(droponfull, "Flag to enable drop-on-full buffer mode"); 101 102 module_param_array(adaptor, int, NULL, 0444); 103 MODULE_PARM_DESC(adaptor, "Type of adaptor."); 104 105 /*#define SNDRV_SERIAL_MS124W_MB_NOCOMBO 1*/ /* Address outs as 0-3 instead of bitmap */ 106 107 #define SNDRV_SERIAL_MAX_OUTS 16 /* max 64, min 16 */ 108 #define SNDRV_SERIAL_MAX_INS 16 /* max 64, min 16 */ 109 110 #define TX_BUFF_SIZE (1<<15) /* Must be 2^n */ 111 #define TX_BUFF_MASK (TX_BUFF_SIZE - 1) 112 113 #define SERIAL_MODE_NOT_OPENED (0) 114 #define SERIAL_MODE_INPUT_OPEN (1 << 0) 115 #define SERIAL_MODE_OUTPUT_OPEN (1 << 1) 116 #define SERIAL_MODE_INPUT_TRIGGERED (1 << 2) 117 #define SERIAL_MODE_OUTPUT_TRIGGERED (1 << 3) 118 119 struct snd_uart16550 { 120 struct snd_card *card; 121 struct snd_rawmidi *rmidi; 122 struct snd_rawmidi_substream *midi_output[SNDRV_SERIAL_MAX_OUTS]; 123 struct snd_rawmidi_substream *midi_input[SNDRV_SERIAL_MAX_INS]; 124 125 int filemode; /* open status of file */ 126 127 spinlock_t open_lock; 128 129 int irq; 130 131 unsigned long base; 132 struct resource *res_base; 133 134 unsigned int speed; 135 unsigned int speed_base; 136 unsigned char divisor; 137 138 unsigned char old_divisor_lsb; 139 unsigned char old_divisor_msb; 140 unsigned char old_line_ctrl_reg; 141 142 /* parameter for using of write loop */ 143 short int fifo_limit; /* used in uart16550 */ 144 short int fifo_count; /* used in uart16550 */ 145 146 /* type of adaptor */ 147 int adaptor; 148 149 /* inputs */ 150 int prev_in; 151 unsigned char rstatus; 152 153 /* outputs */ 154 int prev_out; 155 unsigned char prev_status[SNDRV_SERIAL_MAX_OUTS]; 156 157 /* write buffer and its writing/reading position */ 158 unsigned char tx_buff[TX_BUFF_SIZE]; 159 int buff_in_count; 160 int buff_in; 161 int buff_out; 162 int drop_on_full; 163 164 /* wait timer */ 165 unsigned int timer_running:1; 166 struct timer_list buffer_timer; 167 168 }; 169 170 static struct platform_device *devices[SNDRV_CARDS]; 171 172 static inline void snd_uart16550_add_timer(struct snd_uart16550 *uart) 173 { 174 if (!uart->timer_running) { 175 /* timer 38600bps * 10bit * 16byte */ 176 mod_timer(&uart->buffer_timer, jiffies + (HZ + 255) / 256); 177 uart->timer_running = 1; 178 } 179 } 180 181 static inline void snd_uart16550_del_timer(struct snd_uart16550 *uart) 182 { 183 if (uart->timer_running) { 184 del_timer(&uart->buffer_timer); 185 uart->timer_running = 0; 186 } 187 } 188 189 /* This macro is only used in snd_uart16550_io_loop */ 190 static inline void snd_uart16550_buffer_output(struct snd_uart16550 *uart) 191 { 192 unsigned short buff_out = uart->buff_out; 193 if (uart->buff_in_count > 0) { 194 outb(uart->tx_buff[buff_out], uart->base + UART_TX); 195 uart->fifo_count++; 196 buff_out++; 197 buff_out &= TX_BUFF_MASK; 198 uart->buff_out = buff_out; 199 uart->buff_in_count--; 200 } 201 } 202 203 /* This loop should be called with interrupts disabled 204 * We don't want to interrupt this, 205 * as we're already handling an interrupt 206 */ 207 static void snd_uart16550_io_loop(struct snd_uart16550 * uart) 208 { 209 unsigned char c, status; 210 int substream; 211 212 /* recall previous stream */ 213 substream = uart->prev_in; 214 215 /* Read Loop */ 216 while ((status = inb(uart->base + UART_LSR)) & UART_LSR_DR) { 217 /* while receive data ready */ 218 c = inb(uart->base + UART_RX); 219 220 /* keep track of last status byte */ 221 if (c & 0x80) 222 uart->rstatus = c; 223 224 /* handle stream switch */ 225 if (uart->adaptor == SNDRV_SERIAL_GENERIC) { 226 if (uart->rstatus == 0xf5) { 227 if (c <= SNDRV_SERIAL_MAX_INS && c > 0) 228 substream = c - 1; 229 if (c != 0xf5) 230 /* prevent future bytes from being 231 interpreted as streams */ 232 uart->rstatus = 0; 233 } else if ((uart->filemode & SERIAL_MODE_INPUT_OPEN) 234 && uart->midi_input[substream]) 235 snd_rawmidi_receive(uart->midi_input[substream], 236 &c, 1); 237 } else if ((uart->filemode & SERIAL_MODE_INPUT_OPEN) && 238 uart->midi_input[substream]) 239 snd_rawmidi_receive(uart->midi_input[substream], &c, 1); 240 241 if (status & UART_LSR_OE) 242 snd_printk(KERN_WARNING 243 "%s: Overrun on device at 0x%lx\n", 244 uart->rmidi->name, uart->base); 245 } 246 247 /* remember the last stream */ 248 uart->prev_in = substream; 249 250 /* no need of check SERIAL_MODE_OUTPUT_OPEN because if not, 251 buffer is never filled. */ 252 /* Check write status */ 253 if (status & UART_LSR_THRE) 254 uart->fifo_count = 0; 255 if (uart->adaptor == SNDRV_SERIAL_MS124W_SA 256 || uart->adaptor == SNDRV_SERIAL_GENERIC) { 257 /* Can't use FIFO, must send only when CTS is true */ 258 status = inb(uart->base + UART_MSR); 259 while (uart->fifo_count == 0 && (status & UART_MSR_CTS) && 260 uart->buff_in_count > 0) { 261 snd_uart16550_buffer_output(uart); 262 status = inb(uart->base + UART_MSR); 263 } 264 } else { 265 /* Write loop */ 266 while (uart->fifo_count < uart->fifo_limit /* Can we write ? */ 267 && uart->buff_in_count > 0) /* Do we want to? */ 268 snd_uart16550_buffer_output(uart); 269 } 270 if (uart->irq < 0 && uart->buff_in_count > 0) 271 snd_uart16550_add_timer(uart); 272 } 273 274 /* NOTES ON SERVICING INTERUPTS 275 * --------------------------- 276 * After receiving a interrupt, it is important to indicate to the UART that 277 * this has been done. 278 * For a Rx interrupt, this is done by reading the received byte. 279 * For a Tx interrupt this is done by either: 280 * a) Writing a byte 281 * b) Reading the IIR 282 * It is particularly important to read the IIR if a Tx interrupt is received 283 * when there is no data in tx_buff[], as in this case there no other 284 * indication that the interrupt has been serviced, and it remains outstanding 285 * indefinitely. This has the curious side effect that and no further interrupts 286 * will be generated from this device AT ALL!!. 287 * It is also desirable to clear outstanding interrupts when the device is 288 * opened/closed. 289 * 290 * 291 * Note that some devices need OUT2 to be set before they will generate 292 * interrupts at all. (Possibly tied to an internal pull-up on CTS?) 293 */ 294 static irqreturn_t snd_uart16550_interrupt(int irq, void *dev_id) 295 { 296 struct snd_uart16550 *uart; 297 298 uart = dev_id; 299 spin_lock(&uart->open_lock); 300 if (uart->filemode == SERIAL_MODE_NOT_OPENED) { 301 spin_unlock(&uart->open_lock); 302 return IRQ_NONE; 303 } 304 /* indicate to the UART that the interrupt has been serviced */ 305 inb(uart->base + UART_IIR); 306 snd_uart16550_io_loop(uart); 307 spin_unlock(&uart->open_lock); 308 return IRQ_HANDLED; 309 } 310 311 /* When the polling mode, this function calls snd_uart16550_io_loop. */ 312 static void snd_uart16550_buffer_timer(unsigned long data) 313 { 314 unsigned long flags; 315 struct snd_uart16550 *uart; 316 317 uart = (struct snd_uart16550 *)data; 318 spin_lock_irqsave(&uart->open_lock, flags); 319 snd_uart16550_del_timer(uart); 320 snd_uart16550_io_loop(uart); 321 spin_unlock_irqrestore(&uart->open_lock, flags); 322 } 323 324 /* 325 * this method probes, if an uart sits on given port 326 * return 0 if found 327 * return negative error if not found 328 */ 329 static int snd_uart16550_detect(struct snd_uart16550 *uart) 330 { 331 unsigned long io_base = uart->base; 332 int ok; 333 unsigned char c; 334 335 /* Do some vague tests for the presence of the uart */ 336 if (io_base == 0 || io_base == SNDRV_AUTO_PORT) { 337 return -ENODEV; /* Not configured */ 338 } 339 340 uart->res_base = request_region(io_base, 8, "Serial MIDI"); 341 if (uart->res_base == NULL) { 342 snd_printk(KERN_ERR "u16550: can't grab port 0x%lx\n", io_base); 343 return -EBUSY; 344 } 345 346 /* uart detected unless one of the following tests should fail */ 347 ok = 1; 348 /* 8 data-bits, 1 stop-bit, parity off, DLAB = 0 */ 349 outb(UART_LCR_WLEN8, io_base + UART_LCR); /* Line Control Register */ 350 c = inb(io_base + UART_IER); 351 /* The top four bits of the IER should always == 0 */ 352 if ((c & 0xf0) != 0) 353 ok = 0; /* failed */ 354 355 outb(0xaa, io_base + UART_SCR); 356 /* Write arbitrary data into the scratch reg */ 357 c = inb(io_base + UART_SCR); 358 /* If it comes back, it's OK */ 359 if (c != 0xaa) 360 ok = 0; /* failed */ 361 362 outb(0x55, io_base + UART_SCR); 363 /* Write arbitrary data into the scratch reg */ 364 c = inb(io_base + UART_SCR); 365 /* If it comes back, it's OK */ 366 if (c != 0x55) 367 ok = 0; /* failed */ 368 369 return ok; 370 } 371 372 static void snd_uart16550_do_open(struct snd_uart16550 * uart) 373 { 374 char byte; 375 376 /* Initialize basic variables */ 377 uart->buff_in_count = 0; 378 uart->buff_in = 0; 379 uart->buff_out = 0; 380 uart->fifo_limit = 1; 381 uart->fifo_count = 0; 382 uart->timer_running = 0; 383 384 outb(UART_FCR_ENABLE_FIFO /* Enable FIFO's (if available) */ 385 | UART_FCR_CLEAR_RCVR /* Clear receiver FIFO */ 386 | UART_FCR_CLEAR_XMIT /* Clear transmitter FIFO */ 387 | UART_FCR_TRIGGER_4 /* Set FIFO trigger at 4-bytes */ 388 /* NOTE: interrupt generated after T=(time)4-bytes 389 * if less than UART_FCR_TRIGGER bytes received 390 */ 391 ,uart->base + UART_FCR); /* FIFO Control Register */ 392 393 if ((inb(uart->base + UART_IIR) & 0xf0) == 0xc0) 394 uart->fifo_limit = 16; 395 if (uart->divisor != 0) { 396 uart->old_line_ctrl_reg = inb(uart->base + UART_LCR); 397 outb(UART_LCR_DLAB /* Divisor latch access bit */ 398 ,uart->base + UART_LCR); /* Line Control Register */ 399 uart->old_divisor_lsb = inb(uart->base + UART_DLL); 400 uart->old_divisor_msb = inb(uart->base + UART_DLM); 401 402 outb(uart->divisor 403 ,uart->base + UART_DLL); /* Divisor Latch Low */ 404 outb(0 405 ,uart->base + UART_DLM); /* Divisor Latch High */ 406 /* DLAB is reset to 0 in next outb() */ 407 } 408 /* Set serial parameters (parity off, etc) */ 409 outb(UART_LCR_WLEN8 /* 8 data-bits */ 410 | 0 /* 1 stop-bit */ 411 | 0 /* parity off */ 412 | 0 /* DLAB = 0 */ 413 ,uart->base + UART_LCR); /* Line Control Register */ 414 415 switch (uart->adaptor) { 416 default: 417 outb(UART_MCR_RTS /* Set Request-To-Send line active */ 418 | UART_MCR_DTR /* Set Data-Terminal-Ready line active */ 419 | UART_MCR_OUT2 /* Set OUT2 - not always required, but when 420 * it is, it is ESSENTIAL for enabling interrupts 421 */ 422 ,uart->base + UART_MCR); /* Modem Control Register */ 423 break; 424 case SNDRV_SERIAL_MS124W_SA: 425 case SNDRV_SERIAL_MS124W_MB: 426 /* MS-124W can draw power from RTS and DTR if they 427 are in opposite states. */ 428 outb(UART_MCR_RTS | (0&UART_MCR_DTR) | UART_MCR_OUT2, 429 uart->base + UART_MCR); 430 break; 431 case SNDRV_SERIAL_MS124T: 432 /* MS-124T can draw power from RTS and/or DTR (preferably 433 both) if they are both asserted. */ 434 outb(UART_MCR_RTS | UART_MCR_DTR | UART_MCR_OUT2, 435 uart->base + UART_MCR); 436 break; 437 } 438 439 if (uart->irq < 0) { 440 byte = (0 & UART_IER_RDI) /* Disable Receiver data interrupt */ 441 |(0 & UART_IER_THRI) /* Disable Transmitter holding register empty interrupt */ 442 ; 443 } else if (uart->adaptor == SNDRV_SERIAL_MS124W_SA) { 444 byte = UART_IER_RDI /* Enable Receiver data interrupt */ 445 | UART_IER_MSI /* Enable Modem status interrupt */ 446 ; 447 } else if (uart->adaptor == SNDRV_SERIAL_GENERIC) { 448 byte = UART_IER_RDI /* Enable Receiver data interrupt */ 449 | UART_IER_MSI /* Enable Modem status interrupt */ 450 | UART_IER_THRI /* Enable Transmitter holding register empty interrupt */ 451 ; 452 } else { 453 byte = UART_IER_RDI /* Enable Receiver data interrupt */ 454 | UART_IER_THRI /* Enable Transmitter holding register empty interrupt */ 455 ; 456 } 457 outb(byte, uart->base + UART_IER); /* Interrupt enable Register */ 458 459 inb(uart->base + UART_LSR); /* Clear any pre-existing overrun indication */ 460 inb(uart->base + UART_IIR); /* Clear any pre-existing transmit interrupt */ 461 inb(uart->base + UART_RX); /* Clear any pre-existing receive interrupt */ 462 } 463 464 static void snd_uart16550_do_close(struct snd_uart16550 * uart) 465 { 466 if (uart->irq < 0) 467 snd_uart16550_del_timer(uart); 468 469 /* NOTE: may need to disable interrupts before de-registering out handler. 470 * For now, the consequences are harmless. 471 */ 472 473 outb((0 & UART_IER_RDI) /* Disable Receiver data interrupt */ 474 |(0 & UART_IER_THRI) /* Disable Transmitter holding register empty interrupt */ 475 ,uart->base + UART_IER); /* Interrupt enable Register */ 476 477 switch (uart->adaptor) { 478 default: 479 outb((0 & UART_MCR_RTS) /* Deactivate Request-To-Send line */ 480 |(0 & UART_MCR_DTR) /* Deactivate Data-Terminal-Ready line */ 481 |(0 & UART_MCR_OUT2) /* Deactivate OUT2 */ 482 ,uart->base + UART_MCR); /* Modem Control Register */ 483 break; 484 case SNDRV_SERIAL_MS124W_SA: 485 case SNDRV_SERIAL_MS124W_MB: 486 /* MS-124W can draw power from RTS and DTR if they 487 are in opposite states; leave it powered. */ 488 outb(UART_MCR_RTS | (0&UART_MCR_DTR) | (0&UART_MCR_OUT2), 489 uart->base + UART_MCR); 490 break; 491 case SNDRV_SERIAL_MS124T: 492 /* MS-124T can draw power from RTS and/or DTR (preferably 493 both) if they are both asserted; leave it powered. */ 494 outb(UART_MCR_RTS | UART_MCR_DTR | (0&UART_MCR_OUT2), 495 uart->base + UART_MCR); 496 break; 497 } 498 499 inb(uart->base + UART_IIR); /* Clear any outstanding interrupts */ 500 501 /* Restore old divisor */ 502 if (uart->divisor != 0) { 503 outb(UART_LCR_DLAB /* Divisor latch access bit */ 504 ,uart->base + UART_LCR); /* Line Control Register */ 505 outb(uart->old_divisor_lsb 506 ,uart->base + UART_DLL); /* Divisor Latch Low */ 507 outb(uart->old_divisor_msb 508 ,uart->base + UART_DLM); /* Divisor Latch High */ 509 /* Restore old LCR (data bits, stop bits, parity, DLAB) */ 510 outb(uart->old_line_ctrl_reg 511 ,uart->base + UART_LCR); /* Line Control Register */ 512 } 513 } 514 515 static int snd_uart16550_input_open(struct snd_rawmidi_substream *substream) 516 { 517 unsigned long flags; 518 struct snd_uart16550 *uart = substream->rmidi->private_data; 519 520 spin_lock_irqsave(&uart->open_lock, flags); 521 if (uart->filemode == SERIAL_MODE_NOT_OPENED) 522 snd_uart16550_do_open(uart); 523 uart->filemode |= SERIAL_MODE_INPUT_OPEN; 524 uart->midi_input[substream->number] = substream; 525 spin_unlock_irqrestore(&uart->open_lock, flags); 526 return 0; 527 } 528 529 static int snd_uart16550_input_close(struct snd_rawmidi_substream *substream) 530 { 531 unsigned long flags; 532 struct snd_uart16550 *uart = substream->rmidi->private_data; 533 534 spin_lock_irqsave(&uart->open_lock, flags); 535 uart->filemode &= ~SERIAL_MODE_INPUT_OPEN; 536 uart->midi_input[substream->number] = NULL; 537 if (uart->filemode == SERIAL_MODE_NOT_OPENED) 538 snd_uart16550_do_close(uart); 539 spin_unlock_irqrestore(&uart->open_lock, flags); 540 return 0; 541 } 542 543 static void snd_uart16550_input_trigger(struct snd_rawmidi_substream *substream, 544 int up) 545 { 546 unsigned long flags; 547 struct snd_uart16550 *uart = substream->rmidi->private_data; 548 549 spin_lock_irqsave(&uart->open_lock, flags); 550 if (up) 551 uart->filemode |= SERIAL_MODE_INPUT_TRIGGERED; 552 else 553 uart->filemode &= ~SERIAL_MODE_INPUT_TRIGGERED; 554 spin_unlock_irqrestore(&uart->open_lock, flags); 555 } 556 557 static int snd_uart16550_output_open(struct snd_rawmidi_substream *substream) 558 { 559 unsigned long flags; 560 struct snd_uart16550 *uart = substream->rmidi->private_data; 561 562 spin_lock_irqsave(&uart->open_lock, flags); 563 if (uart->filemode == SERIAL_MODE_NOT_OPENED) 564 snd_uart16550_do_open(uart); 565 uart->filemode |= SERIAL_MODE_OUTPUT_OPEN; 566 uart->midi_output[substream->number] = substream; 567 spin_unlock_irqrestore(&uart->open_lock, flags); 568 return 0; 569 }; 570 571 static int snd_uart16550_output_close(struct snd_rawmidi_substream *substream) 572 { 573 unsigned long flags; 574 struct snd_uart16550 *uart = substream->rmidi->private_data; 575 576 spin_lock_irqsave(&uart->open_lock, flags); 577 uart->filemode &= ~SERIAL_MODE_OUTPUT_OPEN; 578 uart->midi_output[substream->number] = NULL; 579 if (uart->filemode == SERIAL_MODE_NOT_OPENED) 580 snd_uart16550_do_close(uart); 581 spin_unlock_irqrestore(&uart->open_lock, flags); 582 return 0; 583 }; 584 585 static inline int snd_uart16550_buffer_can_write(struct snd_uart16550 *uart, 586 int Num) 587 { 588 if (uart->buff_in_count + Num < TX_BUFF_SIZE) 589 return 1; 590 else 591 return 0; 592 } 593 594 static inline int snd_uart16550_write_buffer(struct snd_uart16550 *uart, 595 unsigned char byte) 596 { 597 unsigned short buff_in = uart->buff_in; 598 if (uart->buff_in_count < TX_BUFF_SIZE) { 599 uart->tx_buff[buff_in] = byte; 600 buff_in++; 601 buff_in &= TX_BUFF_MASK; 602 uart->buff_in = buff_in; 603 uart->buff_in_count++; 604 if (uart->irq < 0) /* polling mode */ 605 snd_uart16550_add_timer(uart); 606 return 1; 607 } else 608 return 0; 609 } 610 611 static int snd_uart16550_output_byte(struct snd_uart16550 *uart, 612 struct snd_rawmidi_substream *substream, 613 unsigned char midi_byte) 614 { 615 if (uart->buff_in_count == 0 /* Buffer empty? */ 616 && ((uart->adaptor != SNDRV_SERIAL_MS124W_SA && 617 uart->adaptor != SNDRV_SERIAL_GENERIC) || 618 (uart->fifo_count == 0 /* FIFO empty? */ 619 && (inb(uart->base + UART_MSR) & UART_MSR_CTS)))) { /* CTS? */ 620 621 /* Tx Buffer Empty - try to write immediately */ 622 if ((inb(uart->base + UART_LSR) & UART_LSR_THRE) != 0) { 623 /* Transmitter holding register (and Tx FIFO) empty */ 624 uart->fifo_count = 1; 625 outb(midi_byte, uart->base + UART_TX); 626 } else { 627 if (uart->fifo_count < uart->fifo_limit) { 628 uart->fifo_count++; 629 outb(midi_byte, uart->base + UART_TX); 630 } else { 631 /* Cannot write (buffer empty) - 632 * put char in buffer */ 633 snd_uart16550_write_buffer(uart, midi_byte); 634 } 635 } 636 } else { 637 if (!snd_uart16550_write_buffer(uart, midi_byte)) { 638 snd_printk(KERN_WARNING 639 "%s: Buffer overrun on device at 0x%lx\n", 640 uart->rmidi->name, uart->base); 641 return 0; 642 } 643 } 644 645 return 1; 646 } 647 648 static void snd_uart16550_output_write(struct snd_rawmidi_substream *substream) 649 { 650 unsigned long flags; 651 unsigned char midi_byte, addr_byte; 652 struct snd_uart16550 *uart = substream->rmidi->private_data; 653 char first; 654 static unsigned long lasttime = 0; 655 656 /* Interrupts are disabled during the updating of the tx_buff, 657 * since it is 'bad' to have two processes updating the same 658 * variables (ie buff_in & buff_out) 659 */ 660 661 spin_lock_irqsave(&uart->open_lock, flags); 662 663 if (uart->irq < 0) /* polling */ 664 snd_uart16550_io_loop(uart); 665 666 if (uart->adaptor == SNDRV_SERIAL_MS124W_MB) { 667 while (1) { 668 /* buffer full? */ 669 /* in this mode we need two bytes of space */ 670 if (uart->buff_in_count > TX_BUFF_SIZE - 2) 671 break; 672 if (snd_rawmidi_transmit(substream, &midi_byte, 1) != 1) 673 break; 674 #ifdef SNDRV_SERIAL_MS124W_MB_NOCOMBO 675 /* select exactly one of the four ports */ 676 addr_byte = (1 << (substream->number + 4)) | 0x08; 677 #else 678 /* select any combination of the four ports */ 679 addr_byte = (substream->number << 4) | 0x08; 680 /* ...except none */ 681 if (addr_byte == 0x08) 682 addr_byte = 0xf8; 683 #endif 684 snd_uart16550_output_byte(uart, substream, addr_byte); 685 /* send midi byte */ 686 snd_uart16550_output_byte(uart, substream, midi_byte); 687 } 688 } else { 689 first = 0; 690 while (snd_rawmidi_transmit_peek(substream, &midi_byte, 1) == 1) { 691 /* Also send F5 after 3 seconds with no data 692 * to handle device disconnect */ 693 if (first == 0 && 694 (uart->adaptor == SNDRV_SERIAL_SOUNDCANVAS || 695 uart->adaptor == SNDRV_SERIAL_GENERIC) && 696 (uart->prev_out != substream->number || 697 time_after(jiffies, lasttime + 3*HZ))) { 698 699 if (snd_uart16550_buffer_can_write(uart, 3)) { 700 /* Roland Soundcanvas part selection */ 701 /* If this substream of the data is 702 * different previous substream 703 * in this uart, send the change part 704 * event 705 */ 706 uart->prev_out = substream->number; 707 /* change part */ 708 snd_uart16550_output_byte(uart, substream, 709 0xf5); 710 /* data */ 711 snd_uart16550_output_byte(uart, substream, 712 uart->prev_out + 1); 713 /* If midi_byte is a data byte, 714 * send the previous status byte */ 715 if (midi_byte < 0x80 && 716 uart->adaptor == SNDRV_SERIAL_SOUNDCANVAS) 717 snd_uart16550_output_byte(uart, substream, uart->prev_status[uart->prev_out]); 718 } else if (!uart->drop_on_full) 719 break; 720 721 } 722 723 /* send midi byte */ 724 if (!snd_uart16550_output_byte(uart, substream, midi_byte) && 725 !uart->drop_on_full ) 726 break; 727 728 if (midi_byte >= 0x80 && midi_byte < 0xf0) 729 uart->prev_status[uart->prev_out] = midi_byte; 730 first = 1; 731 732 snd_rawmidi_transmit_ack( substream, 1 ); 733 } 734 lasttime = jiffies; 735 } 736 spin_unlock_irqrestore(&uart->open_lock, flags); 737 } 738 739 static void snd_uart16550_output_trigger(struct snd_rawmidi_substream *substream, 740 int up) 741 { 742 unsigned long flags; 743 struct snd_uart16550 *uart = substream->rmidi->private_data; 744 745 spin_lock_irqsave(&uart->open_lock, flags); 746 if (up) 747 uart->filemode |= SERIAL_MODE_OUTPUT_TRIGGERED; 748 else 749 uart->filemode &= ~SERIAL_MODE_OUTPUT_TRIGGERED; 750 spin_unlock_irqrestore(&uart->open_lock, flags); 751 if (up) 752 snd_uart16550_output_write(substream); 753 } 754 755 static struct snd_rawmidi_ops snd_uart16550_output = 756 { 757 .open = snd_uart16550_output_open, 758 .close = snd_uart16550_output_close, 759 .trigger = snd_uart16550_output_trigger, 760 }; 761 762 static struct snd_rawmidi_ops snd_uart16550_input = 763 { 764 .open = snd_uart16550_input_open, 765 .close = snd_uart16550_input_close, 766 .trigger = snd_uart16550_input_trigger, 767 }; 768 769 static int snd_uart16550_free(struct snd_uart16550 *uart) 770 { 771 if (uart->irq >= 0) 772 free_irq(uart->irq, uart); 773 release_and_free_resource(uart->res_base); 774 kfree(uart); 775 return 0; 776 }; 777 778 static int snd_uart16550_dev_free(struct snd_device *device) 779 { 780 struct snd_uart16550 *uart = device->device_data; 781 return snd_uart16550_free(uart); 782 } 783 784 static int snd_uart16550_create(struct snd_card *card, 785 unsigned long iobase, 786 int irq, 787 unsigned int speed, 788 unsigned int base, 789 int adaptor, 790 int droponfull, 791 struct snd_uart16550 **ruart) 792 { 793 static struct snd_device_ops ops = { 794 .dev_free = snd_uart16550_dev_free, 795 }; 796 struct snd_uart16550 *uart; 797 int err; 798 799 800 if ((uart = kzalloc(sizeof(*uart), GFP_KERNEL)) == NULL) 801 return -ENOMEM; 802 uart->adaptor = adaptor; 803 uart->card = card; 804 spin_lock_init(&uart->open_lock); 805 uart->irq = -1; 806 uart->base = iobase; 807 uart->drop_on_full = droponfull; 808 809 if ((err = snd_uart16550_detect(uart)) <= 0) { 810 printk(KERN_ERR "no UART detected at 0x%lx\n", iobase); 811 snd_uart16550_free(uart); 812 return -ENODEV; 813 } 814 815 if (irq >= 0 && irq != SNDRV_AUTO_IRQ) { 816 if (request_irq(irq, snd_uart16550_interrupt, 817 0, "Serial MIDI", uart)) { 818 snd_printk(KERN_WARNING 819 "irq %d busy. Using Polling.\n", irq); 820 } else { 821 uart->irq = irq; 822 } 823 } 824 uart->divisor = base / speed; 825 uart->speed = base / (unsigned int)uart->divisor; 826 uart->speed_base = base; 827 uart->prev_out = -1; 828 uart->prev_in = 0; 829 uart->rstatus = 0; 830 memset(uart->prev_status, 0x80, sizeof(unsigned char) * SNDRV_SERIAL_MAX_OUTS); 831 setup_timer(&uart->buffer_timer, snd_uart16550_buffer_timer, 832 (unsigned long)uart); 833 uart->timer_running = 0; 834 835 /* Register device */ 836 if ((err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, uart, &ops)) < 0) { 837 snd_uart16550_free(uart); 838 return err; 839 } 840 841 switch (uart->adaptor) { 842 case SNDRV_SERIAL_MS124W_SA: 843 case SNDRV_SERIAL_MS124W_MB: 844 /* MS-124W can draw power from RTS and DTR if they 845 are in opposite states. */ 846 outb(UART_MCR_RTS | (0&UART_MCR_DTR), uart->base + UART_MCR); 847 break; 848 case SNDRV_SERIAL_MS124T: 849 /* MS-124T can draw power from RTS and/or DTR (preferably 850 both) if they are asserted. */ 851 outb(UART_MCR_RTS | UART_MCR_DTR, uart->base + UART_MCR); 852 break; 853 default: 854 break; 855 } 856 857 if (ruart) 858 *ruart = uart; 859 860 return 0; 861 } 862 863 static void snd_uart16550_substreams(struct snd_rawmidi_str *stream) 864 { 865 struct snd_rawmidi_substream *substream; 866 867 list_for_each_entry(substream, &stream->substreams, list) { 868 sprintf(substream->name, "Serial MIDI %d", substream->number + 1); 869 } 870 } 871 872 static int snd_uart16550_rmidi(struct snd_uart16550 *uart, int device, 873 int outs, int ins, 874 struct snd_rawmidi **rmidi) 875 { 876 struct snd_rawmidi *rrawmidi; 877 int err; 878 879 err = snd_rawmidi_new(uart->card, "UART Serial MIDI", device, 880 outs, ins, &rrawmidi); 881 if (err < 0) 882 return err; 883 snd_rawmidi_set_ops(rrawmidi, SNDRV_RAWMIDI_STREAM_INPUT, 884 &snd_uart16550_input); 885 snd_rawmidi_set_ops(rrawmidi, SNDRV_RAWMIDI_STREAM_OUTPUT, 886 &snd_uart16550_output); 887 strcpy(rrawmidi->name, "Serial MIDI"); 888 snd_uart16550_substreams(&rrawmidi->streams[SNDRV_RAWMIDI_STREAM_OUTPUT]); 889 snd_uart16550_substreams(&rrawmidi->streams[SNDRV_RAWMIDI_STREAM_INPUT]); 890 rrawmidi->info_flags = SNDRV_RAWMIDI_INFO_OUTPUT | 891 SNDRV_RAWMIDI_INFO_INPUT | 892 SNDRV_RAWMIDI_INFO_DUPLEX; 893 rrawmidi->private_data = uart; 894 if (rmidi) 895 *rmidi = rrawmidi; 896 return 0; 897 } 898 899 static int snd_serial_probe(struct platform_device *devptr) 900 { 901 struct snd_card *card; 902 struct snd_uart16550 *uart; 903 int err; 904 int dev = devptr->id; 905 906 switch (adaptor[dev]) { 907 case SNDRV_SERIAL_SOUNDCANVAS: 908 ins[dev] = 1; 909 break; 910 case SNDRV_SERIAL_MS124T: 911 case SNDRV_SERIAL_MS124W_SA: 912 outs[dev] = 1; 913 ins[dev] = 1; 914 break; 915 case SNDRV_SERIAL_MS124W_MB: 916 outs[dev] = 16; 917 ins[dev] = 1; 918 break; 919 case SNDRV_SERIAL_GENERIC: 920 break; 921 default: 922 snd_printk(KERN_ERR 923 "Adaptor type is out of range 0-%d (%d)\n", 924 SNDRV_SERIAL_MAX_ADAPTOR, adaptor[dev]); 925 return -ENODEV; 926 } 927 928 if (outs[dev] < 1 || outs[dev] > SNDRV_SERIAL_MAX_OUTS) { 929 snd_printk(KERN_ERR 930 "Count of outputs is out of range 1-%d (%d)\n", 931 SNDRV_SERIAL_MAX_OUTS, outs[dev]); 932 return -ENODEV; 933 } 934 935 if (ins[dev] < 1 || ins[dev] > SNDRV_SERIAL_MAX_INS) { 936 snd_printk(KERN_ERR 937 "Count of inputs is out of range 1-%d (%d)\n", 938 SNDRV_SERIAL_MAX_INS, ins[dev]); 939 return -ENODEV; 940 } 941 942 err = snd_card_new(&devptr->dev, index[dev], id[dev], THIS_MODULE, 943 0, &card); 944 if (err < 0) 945 return err; 946 947 strcpy(card->driver, "Serial"); 948 strcpy(card->shortname, "Serial MIDI (UART16550A)"); 949 950 if ((err = snd_uart16550_create(card, 951 port[dev], 952 irq[dev], 953 speed[dev], 954 base[dev], 955 adaptor[dev], 956 droponfull[dev], 957 &uart)) < 0) 958 goto _err; 959 960 err = snd_uart16550_rmidi(uart, 0, outs[dev], ins[dev], &uart->rmidi); 961 if (err < 0) 962 goto _err; 963 964 sprintf(card->longname, "%s [%s] at %#lx, irq %d", 965 card->shortname, 966 adaptor_names[uart->adaptor], 967 uart->base, 968 uart->irq); 969 970 if ((err = snd_card_register(card)) < 0) 971 goto _err; 972 973 platform_set_drvdata(devptr, card); 974 return 0; 975 976 _err: 977 snd_card_free(card); 978 return err; 979 } 980 981 static int snd_serial_remove(struct platform_device *devptr) 982 { 983 snd_card_free(platform_get_drvdata(devptr)); 984 return 0; 985 } 986 987 #define SND_SERIAL_DRIVER "snd_serial_u16550" 988 989 static struct platform_driver snd_serial_driver = { 990 .probe = snd_serial_probe, 991 .remove = snd_serial_remove, 992 .driver = { 993 .name = SND_SERIAL_DRIVER, 994 }, 995 }; 996 997 static void snd_serial_unregister_all(void) 998 { 999 int i; 1000 1001 for (i = 0; i < ARRAY_SIZE(devices); ++i) 1002 platform_device_unregister(devices[i]); 1003 platform_driver_unregister(&snd_serial_driver); 1004 } 1005 1006 static int __init alsa_card_serial_init(void) 1007 { 1008 int i, cards, err; 1009 1010 if ((err = platform_driver_register(&snd_serial_driver)) < 0) 1011 return err; 1012 1013 cards = 0; 1014 for (i = 0; i < SNDRV_CARDS; i++) { 1015 struct platform_device *device; 1016 if (! enable[i]) 1017 continue; 1018 device = platform_device_register_simple(SND_SERIAL_DRIVER, 1019 i, NULL, 0); 1020 if (IS_ERR(device)) 1021 continue; 1022 if (!platform_get_drvdata(device)) { 1023 platform_device_unregister(device); 1024 continue; 1025 } 1026 devices[i] = device; 1027 cards++; 1028 } 1029 if (! cards) { 1030 #ifdef MODULE 1031 printk(KERN_ERR "serial midi soundcard not found or device busy\n"); 1032 #endif 1033 snd_serial_unregister_all(); 1034 return -ENODEV; 1035 } 1036 return 0; 1037 } 1038 1039 static void __exit alsa_card_serial_exit(void) 1040 { 1041 snd_serial_unregister_all(); 1042 } 1043 1044 module_init(alsa_card_serial_init) 1045 module_exit(alsa_card_serial_exit) 1046