xref: /openbmc/linux/sound/drivers/opl3/opl3_lib.c (revision 34273b23)
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  *  Copyright (c) by Jaroslav Kysela <perex@perex.cz>,
4  *                   Hannu Savolainen 1993-1996,
5  *                   Rob Hooft
6  *
7  *  Routines for control of AdLib FM cards (OPL2/OPL3/OPL4 chips)
8  *
9  *  Most if code is ported from OSS/Lite.
10  */
11 
12 #include <sound/opl3.h>
13 #include <linux/io.h>
14 #include <linux/delay.h>
15 #include <linux/module.h>
16 #include <linux/init.h>
17 #include <linux/slab.h>
18 #include <linux/ioport.h>
19 #include <sound/minors.h>
20 #include "opl3_voice.h"
21 
22 MODULE_AUTHOR("Jaroslav Kysela <perex@perex.cz>, Hannu Savolainen 1993-1996, Rob Hooft");
23 MODULE_DESCRIPTION("Routines for control of AdLib FM cards (OPL2/OPL3/OPL4 chips)");
24 MODULE_LICENSE("GPL");
25 
26 static void snd_opl2_command(struct snd_opl3 * opl3, unsigned short cmd, unsigned char val)
27 {
28 	unsigned long flags;
29 	unsigned long port;
30 
31 	/*
32 	 * The original 2-OP synth requires a quite long delay
33 	 * after writing to a register.
34 	 */
35 
36 	port = (cmd & OPL3_RIGHT) ? opl3->r_port : opl3->l_port;
37 
38 	spin_lock_irqsave(&opl3->reg_lock, flags);
39 
40 	outb((unsigned char) cmd, port);
41 	udelay(10);
42 
43 	outb((unsigned char) val, port + 1);
44 	udelay(30);
45 
46 	spin_unlock_irqrestore(&opl3->reg_lock, flags);
47 }
48 
49 static void snd_opl3_command(struct snd_opl3 * opl3, unsigned short cmd, unsigned char val)
50 {
51 	unsigned long flags;
52 	unsigned long port;
53 
54 	/*
55 	 * The OPL-3 survives with just two INBs
56 	 * after writing to a register.
57 	 */
58 
59 	port = (cmd & OPL3_RIGHT) ? opl3->r_port : opl3->l_port;
60 
61 	spin_lock_irqsave(&opl3->reg_lock, flags);
62 
63 	outb((unsigned char) cmd, port);
64 	inb(opl3->l_port);
65 	inb(opl3->l_port);
66 
67 	outb((unsigned char) val, port + 1);
68 	inb(opl3->l_port);
69 	inb(opl3->l_port);
70 
71 	spin_unlock_irqrestore(&opl3->reg_lock, flags);
72 }
73 
74 static int snd_opl3_detect(struct snd_opl3 * opl3)
75 {
76 	/*
77 	 * This function returns 1 if the FM chip is present at the given I/O port
78 	 * The detection algorithm plays with the timer built in the FM chip and
79 	 * looks for a change in the status register.
80 	 *
81 	 * Note! The timers of the FM chip are not connected to AdLib (and compatible)
82 	 * boards.
83 	 *
84 	 * Note2! The chip is initialized if detected.
85 	 */
86 
87 	unsigned char stat1, stat2, signature;
88 
89 	/* Reset timers 1 and 2 */
90 	opl3->command(opl3, OPL3_LEFT | OPL3_REG_TIMER_CONTROL, OPL3_TIMER1_MASK | OPL3_TIMER2_MASK);
91 	/* Reset the IRQ of the FM chip */
92 	opl3->command(opl3, OPL3_LEFT | OPL3_REG_TIMER_CONTROL, OPL3_IRQ_RESET);
93 	signature = stat1 = inb(opl3->l_port);	/* Status register */
94 	if ((stat1 & 0xe0) != 0x00) {	/* Should be 0x00 */
95 		snd_printd("OPL3: stat1 = 0x%x\n", stat1);
96 		return -ENODEV;
97 	}
98 	/* Set timer1 to 0xff */
99 	opl3->command(opl3, OPL3_LEFT | OPL3_REG_TIMER1, 0xff);
100 	/* Unmask and start timer 1 */
101 	opl3->command(opl3, OPL3_LEFT | OPL3_REG_TIMER_CONTROL, OPL3_TIMER2_MASK | OPL3_TIMER1_START);
102 	/* Now we have to delay at least 80us */
103 	udelay(200);
104 	/* Read status after timers have expired */
105 	stat2 = inb(opl3->l_port);
106 	/* Stop the timers */
107 	opl3->command(opl3, OPL3_LEFT | OPL3_REG_TIMER_CONTROL, OPL3_TIMER1_MASK | OPL3_TIMER2_MASK);
108 	/* Reset the IRQ of the FM chip */
109 	opl3->command(opl3, OPL3_LEFT | OPL3_REG_TIMER_CONTROL, OPL3_IRQ_RESET);
110 	if ((stat2 & 0xe0) != 0xc0) {	/* There is no YM3812 */
111 		snd_printd("OPL3: stat2 = 0x%x\n", stat2);
112 		return -ENODEV;
113 	}
114 
115 	/* If the toplevel code knows exactly the type of chip, don't try
116 	   to detect it. */
117 	if (opl3->hardware != OPL3_HW_AUTO)
118 		return 0;
119 
120 	/* There is a FM chip on this address. Detect the type (OPL2 to OPL4) */
121 	if (signature == 0x06) {	/* OPL2 */
122 		opl3->hardware = OPL3_HW_OPL2;
123 	} else {
124 		/*
125 		 * If we had an OPL4 chip, opl3->hardware would have been set
126 		 * by the OPL4 driver; so we can assume OPL3 here.
127 		 */
128 		if (snd_BUG_ON(!opl3->r_port))
129 			return -ENODEV;
130 		opl3->hardware = OPL3_HW_OPL3;
131 	}
132 	return 0;
133 }
134 
135 /*
136  *  AdLib timers
137  */
138 
139 /*
140  *  Timer 1 - 80us
141  */
142 
143 static int snd_opl3_timer1_start(struct snd_timer * timer)
144 {
145 	unsigned long flags;
146 	unsigned char tmp;
147 	unsigned int ticks;
148 	struct snd_opl3 *opl3;
149 
150 	opl3 = snd_timer_chip(timer);
151 	spin_lock_irqsave(&opl3->timer_lock, flags);
152 	ticks = timer->sticks;
153 	tmp = (opl3->timer_enable | OPL3_TIMER1_START) & ~OPL3_TIMER1_MASK;
154 	opl3->timer_enable = tmp;
155 	opl3->command(opl3, OPL3_LEFT | OPL3_REG_TIMER1, 256 - ticks);	/* timer 1 count */
156 	opl3->command(opl3, OPL3_LEFT | OPL3_REG_TIMER_CONTROL, tmp);	/* enable timer 1 IRQ */
157 	spin_unlock_irqrestore(&opl3->timer_lock, flags);
158 	return 0;
159 }
160 
161 static int snd_opl3_timer1_stop(struct snd_timer * timer)
162 {
163 	unsigned long flags;
164 	unsigned char tmp;
165 	struct snd_opl3 *opl3;
166 
167 	opl3 = snd_timer_chip(timer);
168 	spin_lock_irqsave(&opl3->timer_lock, flags);
169 	tmp = (opl3->timer_enable | OPL3_TIMER1_MASK) & ~OPL3_TIMER1_START;
170 	opl3->timer_enable = tmp;
171 	opl3->command(opl3, OPL3_LEFT | OPL3_REG_TIMER_CONTROL, tmp);	/* disable timer #1 */
172 	spin_unlock_irqrestore(&opl3->timer_lock, flags);
173 	return 0;
174 }
175 
176 /*
177  *  Timer 2 - 320us
178  */
179 
180 static int snd_opl3_timer2_start(struct snd_timer * timer)
181 {
182 	unsigned long flags;
183 	unsigned char tmp;
184 	unsigned int ticks;
185 	struct snd_opl3 *opl3;
186 
187 	opl3 = snd_timer_chip(timer);
188 	spin_lock_irqsave(&opl3->timer_lock, flags);
189 	ticks = timer->sticks;
190 	tmp = (opl3->timer_enable | OPL3_TIMER2_START) & ~OPL3_TIMER2_MASK;
191 	opl3->timer_enable = tmp;
192 	opl3->command(opl3, OPL3_LEFT | OPL3_REG_TIMER2, 256 - ticks);	/* timer 1 count */
193 	opl3->command(opl3, OPL3_LEFT | OPL3_REG_TIMER_CONTROL, tmp);	/* enable timer 1 IRQ */
194 	spin_unlock_irqrestore(&opl3->timer_lock, flags);
195 	return 0;
196 }
197 
198 static int snd_opl3_timer2_stop(struct snd_timer * timer)
199 {
200 	unsigned long flags;
201 	unsigned char tmp;
202 	struct snd_opl3 *opl3;
203 
204 	opl3 = snd_timer_chip(timer);
205 	spin_lock_irqsave(&opl3->timer_lock, flags);
206 	tmp = (opl3->timer_enable | OPL3_TIMER2_MASK) & ~OPL3_TIMER2_START;
207 	opl3->timer_enable = tmp;
208 	opl3->command(opl3, OPL3_LEFT | OPL3_REG_TIMER_CONTROL, tmp);	/* disable timer #1 */
209 	spin_unlock_irqrestore(&opl3->timer_lock, flags);
210 	return 0;
211 }
212 
213 /*
214 
215  */
216 
217 static struct snd_timer_hardware snd_opl3_timer1 =
218 {
219 	.flags =	SNDRV_TIMER_HW_STOP,
220 	.resolution =	80000,
221 	.ticks =	256,
222 	.start =	snd_opl3_timer1_start,
223 	.stop =		snd_opl3_timer1_stop,
224 };
225 
226 static struct snd_timer_hardware snd_opl3_timer2 =
227 {
228 	.flags =	SNDRV_TIMER_HW_STOP,
229 	.resolution =	320000,
230 	.ticks =	256,
231 	.start =	snd_opl3_timer2_start,
232 	.stop =		snd_opl3_timer2_stop,
233 };
234 
235 static int snd_opl3_timer1_init(struct snd_opl3 * opl3, int timer_no)
236 {
237 	struct snd_timer *timer = NULL;
238 	struct snd_timer_id tid;
239 	int err;
240 
241 	tid.dev_class = SNDRV_TIMER_CLASS_CARD;
242 	tid.dev_sclass = SNDRV_TIMER_SCLASS_NONE;
243 	tid.card = opl3->card->number;
244 	tid.device = timer_no;
245 	tid.subdevice = 0;
246 	if ((err = snd_timer_new(opl3->card, "AdLib timer #1", &tid, &timer)) >= 0) {
247 		strcpy(timer->name, "AdLib timer #1");
248 		timer->private_data = opl3;
249 		timer->hw = snd_opl3_timer1;
250 	}
251 	opl3->timer1 = timer;
252 	return err;
253 }
254 
255 static int snd_opl3_timer2_init(struct snd_opl3 * opl3, int timer_no)
256 {
257 	struct snd_timer *timer = NULL;
258 	struct snd_timer_id tid;
259 	int err;
260 
261 	tid.dev_class = SNDRV_TIMER_CLASS_CARD;
262 	tid.dev_sclass = SNDRV_TIMER_SCLASS_NONE;
263 	tid.card = opl3->card->number;
264 	tid.device = timer_no;
265 	tid.subdevice = 0;
266 	if ((err = snd_timer_new(opl3->card, "AdLib timer #2", &tid, &timer)) >= 0) {
267 		strcpy(timer->name, "AdLib timer #2");
268 		timer->private_data = opl3;
269 		timer->hw = snd_opl3_timer2;
270 	}
271 	opl3->timer2 = timer;
272 	return err;
273 }
274 
275 /*
276 
277  */
278 
279 void snd_opl3_interrupt(struct snd_hwdep * hw)
280 {
281 	unsigned char status;
282 	struct snd_opl3 *opl3;
283 	struct snd_timer *timer;
284 
285 	if (hw == NULL)
286 		return;
287 
288 	opl3 = hw->private_data;
289 	status = inb(opl3->l_port);
290 #if 0
291 	snd_printk(KERN_DEBUG "AdLib IRQ status = 0x%x\n", status);
292 #endif
293 	if (!(status & 0x80))
294 		return;
295 
296 	if (status & 0x40) {
297 		timer = opl3->timer1;
298 		snd_timer_interrupt(timer, timer->sticks);
299 	}
300 	if (status & 0x20) {
301 		timer = opl3->timer2;
302 		snd_timer_interrupt(timer, timer->sticks);
303 	}
304 }
305 
306 EXPORT_SYMBOL(snd_opl3_interrupt);
307 
308 /*
309 
310  */
311 
312 static int snd_opl3_free(struct snd_opl3 *opl3)
313 {
314 	if (snd_BUG_ON(!opl3))
315 		return -ENXIO;
316 	if (opl3->private_free)
317 		opl3->private_free(opl3);
318 	snd_opl3_clear_patches(opl3);
319 	release_and_free_resource(opl3->res_l_port);
320 	release_and_free_resource(opl3->res_r_port);
321 	kfree(opl3);
322 	return 0;
323 }
324 
325 static int snd_opl3_dev_free(struct snd_device *device)
326 {
327 	struct snd_opl3 *opl3 = device->device_data;
328 	return snd_opl3_free(opl3);
329 }
330 
331 int snd_opl3_new(struct snd_card *card,
332 		 unsigned short hardware,
333 		 struct snd_opl3 **ropl3)
334 {
335 	static const struct snd_device_ops ops = {
336 		.dev_free = snd_opl3_dev_free,
337 	};
338 	struct snd_opl3 *opl3;
339 	int err;
340 
341 	*ropl3 = NULL;
342 	opl3 = kzalloc(sizeof(*opl3), GFP_KERNEL);
343 	if (!opl3)
344 		return -ENOMEM;
345 
346 	opl3->card = card;
347 	opl3->hardware = hardware;
348 	spin_lock_init(&opl3->reg_lock);
349 	spin_lock_init(&opl3->timer_lock);
350 
351 	if ((err = snd_device_new(card, SNDRV_DEV_CODEC, opl3, &ops)) < 0) {
352 		snd_opl3_free(opl3);
353 		return err;
354 	}
355 
356 	*ropl3 = opl3;
357 	return 0;
358 }
359 
360 EXPORT_SYMBOL(snd_opl3_new);
361 
362 int snd_opl3_init(struct snd_opl3 *opl3)
363 {
364 	if (! opl3->command) {
365 		printk(KERN_ERR "snd_opl3_init: command not defined!\n");
366 		return -EINVAL;
367 	}
368 
369 	opl3->command(opl3, OPL3_LEFT | OPL3_REG_TEST, OPL3_ENABLE_WAVE_SELECT);
370 	/* Melodic mode */
371 	opl3->command(opl3, OPL3_LEFT | OPL3_REG_PERCUSSION, 0x00);
372 
373 	switch (opl3->hardware & OPL3_HW_MASK) {
374 	case OPL3_HW_OPL2:
375 		opl3->max_voices = MAX_OPL2_VOICES;
376 		break;
377 	case OPL3_HW_OPL3:
378 	case OPL3_HW_OPL4:
379 		opl3->max_voices = MAX_OPL3_VOICES;
380 		/* Enter OPL3 mode */
381 		opl3->command(opl3, OPL3_RIGHT | OPL3_REG_MODE, OPL3_OPL3_ENABLE);
382 	}
383 	return 0;
384 }
385 
386 EXPORT_SYMBOL(snd_opl3_init);
387 
388 int snd_opl3_create(struct snd_card *card,
389 		    unsigned long l_port,
390 		    unsigned long r_port,
391 		    unsigned short hardware,
392 		    int integrated,
393 		    struct snd_opl3 ** ropl3)
394 {
395 	struct snd_opl3 *opl3;
396 	int err;
397 
398 	*ropl3 = NULL;
399 	if ((err = snd_opl3_new(card, hardware, &opl3)) < 0)
400 		return err;
401 	if (! integrated) {
402 		if ((opl3->res_l_port = request_region(l_port, 2, "OPL2/3 (left)")) == NULL) {
403 			snd_printk(KERN_ERR "opl3: can't grab left port 0x%lx\n", l_port);
404 			snd_device_free(card, opl3);
405 			return -EBUSY;
406 		}
407 		if (r_port != 0 &&
408 		    (opl3->res_r_port = request_region(r_port, 2, "OPL2/3 (right)")) == NULL) {
409 			snd_printk(KERN_ERR "opl3: can't grab right port 0x%lx\n", r_port);
410 			snd_device_free(card, opl3);
411 			return -EBUSY;
412 		}
413 	}
414 	opl3->l_port = l_port;
415 	opl3->r_port = r_port;
416 
417 	switch (opl3->hardware) {
418 	/* some hardware doesn't support timers */
419 	case OPL3_HW_OPL3_SV:
420 	case OPL3_HW_OPL3_CS:
421 	case OPL3_HW_OPL3_FM801:
422 		opl3->command = &snd_opl3_command;
423 		break;
424 	default:
425 		opl3->command = &snd_opl2_command;
426 		if ((err = snd_opl3_detect(opl3)) < 0) {
427 			snd_printd("OPL2/3 chip not detected at 0x%lx/0x%lx\n",
428 				   opl3->l_port, opl3->r_port);
429 			snd_device_free(card, opl3);
430 			return err;
431 		}
432 		/* detect routine returns correct hardware type */
433 		switch (opl3->hardware & OPL3_HW_MASK) {
434 		case OPL3_HW_OPL3:
435 		case OPL3_HW_OPL4:
436 			opl3->command = &snd_opl3_command;
437 		}
438 	}
439 
440 	snd_opl3_init(opl3);
441 
442 	*ropl3 = opl3;
443 	return 0;
444 }
445 
446 EXPORT_SYMBOL(snd_opl3_create);
447 
448 int snd_opl3_timer_new(struct snd_opl3 * opl3, int timer1_dev, int timer2_dev)
449 {
450 	int err;
451 
452 	if (timer1_dev >= 0)
453 		if ((err = snd_opl3_timer1_init(opl3, timer1_dev)) < 0)
454 			return err;
455 	if (timer2_dev >= 0) {
456 		if ((err = snd_opl3_timer2_init(opl3, timer2_dev)) < 0) {
457 			snd_device_free(opl3->card, opl3->timer1);
458 			opl3->timer1 = NULL;
459 			return err;
460 		}
461 	}
462 	return 0;
463 }
464 
465 EXPORT_SYMBOL(snd_opl3_timer_new);
466 
467 int snd_opl3_hwdep_new(struct snd_opl3 * opl3,
468 		       int device, int seq_device,
469 		       struct snd_hwdep ** rhwdep)
470 {
471 	struct snd_hwdep *hw;
472 	struct snd_card *card = opl3->card;
473 	int err;
474 
475 	if (rhwdep)
476 		*rhwdep = NULL;
477 
478 	/* create hardware dependent device (direct FM) */
479 
480 	if ((err = snd_hwdep_new(card, "OPL2/OPL3", device, &hw)) < 0) {
481 		snd_device_free(card, opl3);
482 		return err;
483 	}
484 	hw->private_data = opl3;
485 	hw->exclusive = 1;
486 #ifdef CONFIG_SND_OSSEMUL
487 	if (device == 0)
488 		hw->oss_type = SNDRV_OSS_DEVICE_TYPE_DMFM;
489 #endif
490 	strcpy(hw->name, hw->id);
491 	switch (opl3->hardware & OPL3_HW_MASK) {
492 	case OPL3_HW_OPL2:
493 		strcpy(hw->name, "OPL2 FM");
494 		hw->iface = SNDRV_HWDEP_IFACE_OPL2;
495 		break;
496 	case OPL3_HW_OPL3:
497 		strcpy(hw->name, "OPL3 FM");
498 		hw->iface = SNDRV_HWDEP_IFACE_OPL3;
499 		break;
500 	case OPL3_HW_OPL4:
501 		strcpy(hw->name, "OPL4 FM");
502 		hw->iface = SNDRV_HWDEP_IFACE_OPL4;
503 		break;
504 	}
505 
506 	/* operators - only ioctl */
507 	hw->ops.open = snd_opl3_open;
508 	hw->ops.ioctl = snd_opl3_ioctl;
509 	hw->ops.write = snd_opl3_write;
510 	hw->ops.release = snd_opl3_release;
511 
512 	opl3->hwdep = hw;
513 	opl3->seq_dev_num = seq_device;
514 #if IS_ENABLED(CONFIG_SND_SEQUENCER)
515 	if (snd_seq_device_new(card, seq_device, SNDRV_SEQ_DEV_ID_OPL3,
516 			       sizeof(struct snd_opl3 *), &opl3->seq_dev) >= 0) {
517 		strcpy(opl3->seq_dev->name, hw->name);
518 		*(struct snd_opl3 **)SNDRV_SEQ_DEVICE_ARGPTR(opl3->seq_dev) = opl3;
519 	}
520 #endif
521 	if (rhwdep)
522 		*rhwdep = hw;
523 	return 0;
524 }
525 
526 EXPORT_SYMBOL(snd_opl3_hwdep_new);
527