1#!/usr/bin/env perl 2# SPDX-License-Identifier: GPL-2.0-only 3 4use File::Basename; 5use Math::BigInt; 6use Getopt::Long; 7 8# Copyright 2008, Intel Corporation 9# 10# This file is part of the Linux kernel 11# 12# Authors: 13# Arjan van de Ven <arjan@linux.intel.com> 14 15 16my $cross_compile = ""; 17my $vmlinux_name = ""; 18my $modulefile = ""; 19 20# Get options 21Getopt::Long::GetOptions( 22 'cross-compile|c=s' => \$cross_compile, 23 'module|m=s' => \$modulefile, 24 'help|h' => \&usage, 25) || usage (); 26my $vmlinux_name = $ARGV[0]; 27if (!defined($vmlinux_name)) { 28 my $kerver = `uname -r`; 29 chomp($kerver); 30 $vmlinux_name = "/lib/modules/$kerver/build/vmlinux"; 31 print "No vmlinux specified, assuming $vmlinux_name\n"; 32} 33my $filename = $vmlinux_name; 34 35# Parse the oops to find the EIP value 36 37my $target = "0"; 38my $function; 39my $module = ""; 40my $func_offset = 0; 41my $vmaoffset = 0; 42 43my %regs; 44 45 46sub parse_x86_regs 47{ 48 my ($line) = @_; 49 if ($line =~ /EAX: ([0-9a-f]+) EBX: ([0-9a-f]+) ECX: ([0-9a-f]+) EDX: ([0-9a-f]+)/) { 50 $regs{"%eax"} = $1; 51 $regs{"%ebx"} = $2; 52 $regs{"%ecx"} = $3; 53 $regs{"%edx"} = $4; 54 } 55 if ($line =~ /ESI: ([0-9a-f]+) EDI: ([0-9a-f]+) EBP: ([0-9a-f]+) ESP: ([0-9a-f]+)/) { 56 $regs{"%esi"} = $1; 57 $regs{"%edi"} = $2; 58 $regs{"%esp"} = $4; 59 } 60 if ($line =~ /RAX: ([0-9a-f]+) RBX: ([0-9a-f]+) RCX: ([0-9a-f]+)/) { 61 $regs{"%eax"} = $1; 62 $regs{"%ebx"} = $2; 63 $regs{"%ecx"} = $3; 64 } 65 if ($line =~ /RDX: ([0-9a-f]+) RSI: ([0-9a-f]+) RDI: ([0-9a-f]+)/) { 66 $regs{"%edx"} = $1; 67 $regs{"%esi"} = $2; 68 $regs{"%edi"} = $3; 69 } 70 if ($line =~ /RBP: ([0-9a-f]+) R08: ([0-9a-f]+) R09: ([0-9a-f]+)/) { 71 $regs{"%r08"} = $2; 72 $regs{"%r09"} = $3; 73 } 74 if ($line =~ /R10: ([0-9a-f]+) R11: ([0-9a-f]+) R12: ([0-9a-f]+)/) { 75 $regs{"%r10"} = $1; 76 $regs{"%r11"} = $2; 77 $regs{"%r12"} = $3; 78 } 79 if ($line =~ /R13: ([0-9a-f]+) R14: ([0-9a-f]+) R15: ([0-9a-f]+)/) { 80 $regs{"%r13"} = $1; 81 $regs{"%r14"} = $2; 82 $regs{"%r15"} = $3; 83 } 84} 85 86sub reg_name 87{ 88 my ($reg) = @_; 89 $reg =~ s/r(.)x/e\1x/; 90 $reg =~ s/r(.)i/e\1i/; 91 $reg =~ s/r(.)p/e\1p/; 92 return $reg; 93} 94 95sub process_x86_regs 96{ 97 my ($line, $cntr) = @_; 98 my $str = ""; 99 if (length($line) < 40) { 100 return ""; # not an asm istruction 101 } 102 103 # find the arguments to the instruction 104 if ($line =~ /([0-9a-zA-Z\,\%\(\)\-\+]+)$/) { 105 $lastword = $1; 106 } else { 107 return ""; 108 } 109 110 # we need to find the registers that get clobbered, 111 # since their value is no longer relevant for previous 112 # instructions in the stream. 113 114 $clobber = $lastword; 115 # first, remove all memory operands, they're read only 116 $clobber =~ s/\([a-z0-9\%\,]+\)//g; 117 # then, remove everything before the comma, thats the read part 118 $clobber =~ s/.*\,//g; 119 120 # if this is the instruction that faulted, we haven't actually done 121 # the write yet... nothing is clobbered. 122 if ($cntr == 0) { 123 $clobber = ""; 124 } 125 126 foreach $reg (keys(%regs)) { 127 my $clobberprime = reg_name($clobber); 128 my $lastwordprime = reg_name($lastword); 129 my $val = $regs{$reg}; 130 if ($val =~ /^[0]+$/) { 131 $val = "0"; 132 } else { 133 $val =~ s/^0*//; 134 } 135 136 # first check if we're clobbering this register; if we do 137 # we print it with a =>, and then delete its value 138 if ($clobber =~ /$reg/ || $clobberprime =~ /$reg/) { 139 if (length($val) > 0) { 140 $str = $str . " $reg => $val "; 141 } 142 $regs{$reg} = ""; 143 $val = ""; 144 } 145 # now check if we're reading this register 146 if ($lastword =~ /$reg/ || $lastwordprime =~ /$reg/) { 147 if (length($val) > 0) { 148 $str = $str . " $reg = $val "; 149 } 150 } 151 } 152 return $str; 153} 154 155# parse the oops 156while (<STDIN>) { 157 my $line = $_; 158 if ($line =~ /EIP: 0060:\[\<([a-z0-9]+)\>\]/) { 159 $target = $1; 160 } 161 if ($line =~ /RIP: 0010:\[\<([a-z0-9]+)\>\]/) { 162 $target = $1; 163 } 164 if ($line =~ /EIP is at ([a-zA-Z0-9\_]+)\+0x([0-9a-f]+)\/0x[a-f0-9]/) { 165 $function = $1; 166 $func_offset = $2; 167 } 168 if ($line =~ /RIP: 0010:\[\<[0-9a-f]+\>\] \[\<[0-9a-f]+\>\] ([a-zA-Z0-9\_]+)\+0x([0-9a-f]+)\/0x[a-f0-9]/) { 169 $function = $1; 170 $func_offset = $2; 171 } 172 173 # check if it's a module 174 if ($line =~ /EIP is at ([a-zA-Z0-9\_]+)\+(0x[0-9a-f]+)\/0x[a-f0-9]+\W\[([a-zA-Z0-9\_\-]+)\]/) { 175 $module = $3; 176 } 177 if ($line =~ /RIP: 0010:\[\<[0-9a-f]+\>\] \[\<[0-9a-f]+\>\] ([a-zA-Z0-9\_]+)\+(0x[0-9a-f]+)\/0x[a-f0-9]+\W\[([a-zA-Z0-9\_\-]+)\]/) { 178 $module = $3; 179 } 180 parse_x86_regs($line); 181} 182 183my $decodestart = Math::BigInt->from_hex("0x$target") - Math::BigInt->from_hex("0x$func_offset"); 184my $decodestop = Math::BigInt->from_hex("0x$target") + 8192; 185if ($target eq "0") { 186 print "No oops found!\n"; 187 usage(); 188} 189 190# if it's a module, we need to find the .ko file and calculate a load offset 191if ($module ne "") { 192 if ($modulefile eq "") { 193 $modulefile = `modinfo -F filename $module`; 194 chomp($modulefile); 195 } 196 $filename = $modulefile; 197 if ($filename eq "") { 198 print "Module .ko file for $module not found. Aborting\n"; 199 exit; 200 } 201 # ok so we found the module, now we need to calculate the vma offset 202 open(FILE, $cross_compile."objdump -dS $filename |") || die "Cannot start objdump"; 203 while (<FILE>) { 204 if ($_ =~ /^([0-9a-f]+) \<$function\>\:/) { 205 my $fu = $1; 206 $vmaoffset = Math::BigInt->from_hex("0x$target") - Math::BigInt->from_hex("0x$fu") - Math::BigInt->from_hex("0x$func_offset"); 207 } 208 } 209 close(FILE); 210} 211 212my $counter = 0; 213my $state = 0; 214my $center = -1; 215my @lines; 216my @reglines; 217 218sub InRange { 219 my ($address, $target) = @_; 220 my $ad = "0x".$address; 221 my $ta = "0x".$target; 222 my $delta = Math::BigInt->from_hex($ad) - Math::BigInt->from_hex($ta); 223 224 if (($delta > -4096) && ($delta < 4096)) { 225 return 1; 226 } 227 return 0; 228} 229 230 231 232# first, parse the input into the lines array, but to keep size down, 233# we only do this for 4Kb around the sweet spot 234 235open(FILE, $cross_compile."objdump -dS --adjust-vma=$vmaoffset --start-address=$decodestart --stop-address=$decodestop $filename |") || die "Cannot start objdump"; 236 237while (<FILE>) { 238 my $line = $_; 239 chomp($line); 240 if ($state == 0) { 241 if ($line =~ /^([a-f0-9]+)\:/) { 242 if (InRange($1, $target)) { 243 $state = 1; 244 } 245 } 246 } 247 if ($state == 1) { 248 if ($line =~ /^([a-f0-9][a-f0-9][a-f0-9][a-f0-9][a-f0-9][a-f0-9]+)\:/) { 249 my $val = $1; 250 if (!InRange($val, $target)) { 251 last; 252 } 253 if ($val eq $target) { 254 $center = $counter; 255 } 256 } 257 $lines[$counter] = $line; 258 259 $counter = $counter + 1; 260 } 261} 262 263close(FILE); 264 265if ($counter == 0) { 266 print "No matching code found \n"; 267 exit; 268} 269 270if ($center == -1) { 271 print "No matching code found \n"; 272 exit; 273} 274 275my $start; 276my $finish; 277my $codelines = 0; 278my $binarylines = 0; 279# now we go up and down in the array to find how much we want to print 280 281$start = $center; 282 283while ($start > 1) { 284 $start = $start - 1; 285 my $line = $lines[$start]; 286 if ($line =~ /^([a-f0-9]+)\:/) { 287 $binarylines = $binarylines + 1; 288 } else { 289 $codelines = $codelines + 1; 290 } 291 if ($codelines > 10) { 292 last; 293 } 294 if ($binarylines > 20) { 295 last; 296 } 297} 298 299 300$finish = $center; 301$codelines = 0; 302$binarylines = 0; 303while ($finish < $counter) { 304 $finish = $finish + 1; 305 my $line = $lines[$finish]; 306 if ($line =~ /^([a-f0-9]+)\:/) { 307 $binarylines = $binarylines + 1; 308 } else { 309 $codelines = $codelines + 1; 310 } 311 if ($codelines > 10) { 312 last; 313 } 314 if ($binarylines > 20) { 315 last; 316 } 317} 318 319 320my $i; 321 322 323# start annotating the registers in the asm. 324# this goes from the oopsing point back, so that the annotator 325# can track (opportunistically) which registers got written and 326# whos value no longer is relevant. 327 328$i = $center; 329while ($i >= $start) { 330 $reglines[$i] = process_x86_regs($lines[$i], $center - $i); 331 $i = $i - 1; 332} 333 334$i = $start; 335while ($i < $finish) { 336 my $line; 337 if ($i == $center) { 338 $line = "*$lines[$i] "; 339 } else { 340 $line = " $lines[$i] "; 341 } 342 print $line; 343 if (defined($reglines[$i]) && length($reglines[$i]) > 0) { 344 my $c = 60 - length($line); 345 while ($c > 0) { print " "; $c = $c - 1; }; 346 print "| $reglines[$i]"; 347 } 348 if ($i == $center) { 349 print "<--- faulting instruction"; 350 } 351 print "\n"; 352 $i = $i +1; 353} 354 355sub usage { 356 print <<EOT; 357Usage: 358 dmesg | perl $0 [OPTION] [VMLINUX] 359 360OPTION: 361 -c, --cross-compile CROSS_COMPILE Specify the prefix used for toolchain. 362 -m, --module MODULE_DIRNAME Specify the module filename. 363 -h, --help Help. 364EOT 365 exit; 366} 367