1#!/bin/sh 2# SPDX-License-Identifier: GPL-2.0 3# 4# link vmlinux 5# 6# vmlinux is linked from the objects selected by $(KBUILD_VMLINUX_OBJS) and 7# $(KBUILD_VMLINUX_LIBS). Most are built-in.a files from top-level directories 8# in the kernel tree, others are specified in arch/$(ARCH)/Makefile. 9# $(KBUILD_VMLINUX_LIBS) are archives which are linked conditionally 10# (not within --whole-archive), and do not require symbol indexes added. 11# 12# vmlinux 13# ^ 14# | 15# +--< $(KBUILD_VMLINUX_OBJS) 16# | +--< init/built-in.a drivers/built-in.a mm/built-in.a + more 17# | 18# +--< $(KBUILD_VMLINUX_LIBS) 19# | +--< lib/lib.a + more 20# | 21# +-< ${kallsymso} (see description in KALLSYMS section) 22# 23# vmlinux version (uname -v) cannot be updated during normal 24# descending-into-subdirs phase since we do not yet know if we need to 25# update vmlinux. 26# Therefore this step is delayed until just before final link of vmlinux. 27# 28# System.map is generated to document addresses of all kernel symbols 29 30# Error out on error 31set -e 32 33LD="$1" 34KBUILD_LDFLAGS="$2" 35LDFLAGS_vmlinux="$3" 36 37# Nice output in kbuild format 38# Will be supressed by "make -s" 39info() 40{ 41 if [ "${quiet}" != "silent_" ]; then 42 printf " %-7s %s\n" "${1}" "${2}" 43 fi 44} 45 46# Generate a linker script to ensure correct ordering of initcalls. 47gen_initcalls() 48{ 49 info GEN .tmp_initcalls.lds 50 51 ${PYTHON} ${srctree}/scripts/jobserver-exec \ 52 ${PERL} ${srctree}/scripts/generate_initcall_order.pl \ 53 ${KBUILD_VMLINUX_OBJS} ${KBUILD_VMLINUX_LIBS} \ 54 > .tmp_initcalls.lds 55} 56 57# If CONFIG_LTO_CLANG is selected, collect generated symbol versions into 58# .tmp_symversions.lds 59gen_symversions() 60{ 61 info GEN .tmp_symversions.lds 62 rm -f .tmp_symversions.lds 63 64 for o in ${KBUILD_VMLINUX_OBJS} ${KBUILD_VMLINUX_LIBS}; do 65 if [ -f ${o}.symversions ]; then 66 cat ${o}.symversions >> .tmp_symversions.lds 67 fi 68 done 69} 70 71# Link of vmlinux.o used for section mismatch analysis 72# ${1} output file 73modpost_link() 74{ 75 local objects 76 local lds="" 77 78 objects="--whole-archive \ 79 ${KBUILD_VMLINUX_OBJS} \ 80 --no-whole-archive \ 81 --start-group \ 82 ${KBUILD_VMLINUX_LIBS} \ 83 --end-group" 84 85 if [ -n "${CONFIG_LTO_CLANG}" ]; then 86 gen_initcalls 87 lds="-T .tmp_initcalls.lds" 88 89 if [ -n "${CONFIG_MODVERSIONS}" ]; then 90 gen_symversions 91 lds="${lds} -T .tmp_symversions.lds" 92 fi 93 94 # This might take a while, so indicate that we're doing 95 # an LTO link 96 info LTO ${1} 97 else 98 info LD ${1} 99 fi 100 101 ${LD} ${KBUILD_LDFLAGS} -r -o ${1} ${lds} ${objects} 102} 103 104objtool_link() 105{ 106 local objtoolcmd; 107 local objtoolopt; 108 109 if [ "${CONFIG_LTO_CLANG} ${CONFIG_STACK_VALIDATION}" = "y y" ]; then 110 # Don't perform vmlinux validation unless explicitly requested, 111 # but run objtool on vmlinux.o now that we have an object file. 112 if [ -n "${CONFIG_UNWINDER_ORC}" ]; then 113 objtoolcmd="orc generate" 114 fi 115 116 objtoolopt="${objtoolopt} --duplicate" 117 118 if [ -n "${CONFIG_FTRACE_MCOUNT_USE_OBJTOOL}" ]; then 119 objtoolopt="${objtoolopt} --mcount" 120 fi 121 fi 122 123 if [ -n "${CONFIG_VMLINUX_VALIDATION}" ]; then 124 objtoolopt="${objtoolopt} --noinstr" 125 fi 126 127 if [ -n "${objtoolopt}" ]; then 128 if [ -z "${objtoolcmd}" ]; then 129 objtoolcmd="check" 130 fi 131 objtoolopt="${objtoolopt} --vmlinux" 132 if [ -z "${CONFIG_FRAME_POINTER}" ]; then 133 objtoolopt="${objtoolopt} --no-fp" 134 fi 135 if [ -n "${CONFIG_GCOV_KERNEL}" ] || [ -n "${CONFIG_LTO_CLANG}" ]; then 136 objtoolopt="${objtoolopt} --no-unreachable" 137 fi 138 if [ -n "${CONFIG_RETPOLINE}" ]; then 139 objtoolopt="${objtoolopt} --retpoline" 140 fi 141 if [ -n "${CONFIG_X86_SMAP}" ]; then 142 objtoolopt="${objtoolopt} --uaccess" 143 fi 144 info OBJTOOL ${1} 145 tools/objtool/objtool ${objtoolcmd} ${objtoolopt} ${1} 146 fi 147} 148 149# Link of vmlinux 150# ${1} - output file 151# ${2}, ${3}, ... - optional extra .o files 152vmlinux_link() 153{ 154 local lds="${objtree}/${KBUILD_LDS}" 155 local output=${1} 156 local objects 157 local strip_debug 158 local map_option 159 160 info LD ${output} 161 162 # skip output file argument 163 shift 164 165 # The kallsyms linking does not need debug symbols included. 166 if [ "$output" != "${output#.tmp_vmlinux.kallsyms}" ] ; then 167 strip_debug=-Wl,--strip-debug 168 fi 169 170 if [ -n "${CONFIG_VMLINUX_MAP}" ]; then 171 map_option="-Map=${output}.map" 172 fi 173 174 if [ "${SRCARCH}" != "um" ]; then 175 if [ -n "${CONFIG_LTO_CLANG}" ]; then 176 # Use vmlinux.o instead of performing the slow LTO 177 # link again. 178 objects="--whole-archive \ 179 vmlinux.o \ 180 --no-whole-archive \ 181 ${@}" 182 else 183 objects="--whole-archive \ 184 ${KBUILD_VMLINUX_OBJS} \ 185 --no-whole-archive \ 186 --start-group \ 187 ${KBUILD_VMLINUX_LIBS} \ 188 --end-group \ 189 ${@}" 190 fi 191 192 ${LD} ${KBUILD_LDFLAGS} ${LDFLAGS_vmlinux} \ 193 ${strip_debug#-Wl,} \ 194 -o ${output} \ 195 ${map_option} \ 196 -T ${lds} ${objects} 197 else 198 objects="-Wl,--whole-archive \ 199 ${KBUILD_VMLINUX_OBJS} \ 200 -Wl,--no-whole-archive \ 201 -Wl,--start-group \ 202 ${KBUILD_VMLINUX_LIBS} \ 203 -Wl,--end-group \ 204 ${@}" 205 206 ${CC} ${CFLAGS_vmlinux} \ 207 ${strip_debug} \ 208 -o ${output} \ 209 ${map_option:+-Wl,${map_option}} \ 210 -Wl,-T,${lds} \ 211 ${objects} \ 212 -lutil -lrt -lpthread 213 rm -f linux 214 fi 215} 216 217# generate .BTF typeinfo from DWARF debuginfo 218# ${1} - vmlinux image 219# ${2} - file to dump raw BTF data into 220gen_btf() 221{ 222 local pahole_ver 223 local extra_paholeopt= 224 225 if ! [ -x "$(command -v ${PAHOLE})" ]; then 226 echo >&2 "BTF: ${1}: pahole (${PAHOLE}) is not available" 227 return 1 228 fi 229 230 pahole_ver=$(${PAHOLE} --version | sed -E 's/v([0-9]+)\.([0-9]+)/\1\2/') 231 if [ "${pahole_ver}" -lt "116" ]; then 232 echo >&2 "BTF: ${1}: pahole version $(${PAHOLE} --version) is too old, need at least v1.16" 233 return 1 234 fi 235 236 vmlinux_link ${1} 237 238 if [ "${pahole_ver}" -ge "118" ] && [ "${pahole_ver}" -le "121" ]; then 239 # pahole 1.18 through 1.21 can't handle zero-sized per-CPU vars 240 extra_paholeopt="${extra_paholeopt} --skip_encoding_btf_vars" 241 fi 242 if [ "${pahole_ver}" -ge "121" ]; then 243 extra_paholeopt="${extra_paholeopt} --btf_gen_floats" 244 fi 245 246 info "BTF" ${2} 247 LLVM_OBJCOPY="${OBJCOPY}" ${PAHOLE} -J ${extra_paholeopt} ${1} 248 249 # Create ${2} which contains just .BTF section but no symbols. Add 250 # SHF_ALLOC because .BTF will be part of the vmlinux image. --strip-all 251 # deletes all symbols including __start_BTF and __stop_BTF, which will 252 # be redefined in the linker script. Add 2>/dev/null to suppress GNU 253 # objcopy warnings: "empty loadable segment detected at ..." 254 ${OBJCOPY} --only-section=.BTF --set-section-flags .BTF=alloc,readonly \ 255 --strip-all ${1} ${2} 2>/dev/null 256 # Change e_type to ET_REL so that it can be used to link final vmlinux. 257 # Unlike GNU ld, lld does not allow an ET_EXEC input. 258 printf '\1' | dd of=${2} conv=notrunc bs=1 seek=16 status=none 259} 260 261# Create ${2} .S file with all symbols from the ${1} object file 262kallsyms() 263{ 264 local kallsymopt; 265 266 if [ -n "${CONFIG_KALLSYMS_ALL}" ]; then 267 kallsymopt="${kallsymopt} --all-symbols" 268 fi 269 270 if [ -n "${CONFIG_KALLSYMS_ABSOLUTE_PERCPU}" ]; then 271 kallsymopt="${kallsymopt} --absolute-percpu" 272 fi 273 274 if [ -n "${CONFIG_KALLSYMS_BASE_RELATIVE}" ]; then 275 kallsymopt="${kallsymopt} --base-relative" 276 fi 277 278 info KSYMS ${2} 279 ${NM} -n ${1} | scripts/kallsyms ${kallsymopt} > ${2} 280} 281 282# Perform one step in kallsyms generation, including temporary linking of 283# vmlinux. 284kallsyms_step() 285{ 286 kallsymso_prev=${kallsymso} 287 kallsyms_vmlinux=.tmp_vmlinux.kallsyms${1} 288 kallsymso=${kallsyms_vmlinux}.o 289 kallsyms_S=${kallsyms_vmlinux}.S 290 291 vmlinux_link ${kallsyms_vmlinux} "${kallsymso_prev}" ${btf_vmlinux_bin_o} 292 kallsyms ${kallsyms_vmlinux} ${kallsyms_S} 293 294 info AS ${kallsyms_S} 295 ${CC} ${NOSTDINC_FLAGS} ${LINUXINCLUDE} ${KBUILD_CPPFLAGS} \ 296 ${KBUILD_AFLAGS} ${KBUILD_AFLAGS_KERNEL} \ 297 -c -o ${kallsymso} ${kallsyms_S} 298} 299 300# Create map file with all symbols from ${1} 301# See mksymap for additional details 302mksysmap() 303{ 304 ${CONFIG_SHELL} "${srctree}/scripts/mksysmap" ${1} ${2} 305} 306 307sorttable() 308{ 309 ${objtree}/scripts/sorttable ${1} 310} 311 312# Delete output files in case of error 313cleanup() 314{ 315 rm -f .btf.* 316 rm -f .tmp_System.map 317 rm -f .tmp_initcalls.lds 318 rm -f .tmp_symversions.lds 319 rm -f .tmp_vmlinux* 320 rm -f System.map 321 rm -f vmlinux 322 rm -f vmlinux.map 323 rm -f vmlinux.o 324 rm -f .vmlinux.d 325} 326 327# Use "make V=1" to debug this script 328case "${KBUILD_VERBOSE}" in 329*1*) 330 set -x 331 ;; 332esac 333 334if [ "$1" = "clean" ]; then 335 cleanup 336 exit 0 337fi 338 339# We need access to CONFIG_ symbols 340. include/config/auto.conf 341 342# Update version 343info GEN .version 344if [ -r .version ]; then 345 VERSION=$(expr 0$(cat .version) + 1) 346 echo $VERSION > .version 347else 348 rm -f .version 349 echo 1 > .version 350fi; 351 352# final build of init/ 353${MAKE} -f "${srctree}/scripts/Makefile.build" obj=init need-builtin=1 354 355#link vmlinux.o 356modpost_link vmlinux.o 357objtool_link vmlinux.o 358 359# modpost vmlinux.o to check for section mismatches 360${MAKE} -f "${srctree}/scripts/Makefile.modpost" MODPOST_VMLINUX=1 361 362info MODINFO modules.builtin.modinfo 363${OBJCOPY} -j .modinfo -O binary vmlinux.o modules.builtin.modinfo 364info GEN modules.builtin 365# The second line aids cases where multiple modules share the same object. 366tr '\0' '\n' < modules.builtin.modinfo | sed -n 's/^[[:alnum:]:_]*\.file=//p' | 367 tr ' ' '\n' | uniq | sed -e 's:^:kernel/:' -e 's/$/.ko/' > modules.builtin 368 369btf_vmlinux_bin_o="" 370if [ -n "${CONFIG_DEBUG_INFO_BTF}" ]; then 371 btf_vmlinux_bin_o=.btf.vmlinux.bin.o 372 if ! gen_btf .tmp_vmlinux.btf $btf_vmlinux_bin_o ; then 373 echo >&2 "Failed to generate BTF for vmlinux" 374 echo >&2 "Try to disable CONFIG_DEBUG_INFO_BTF" 375 exit 1 376 fi 377fi 378 379kallsymso="" 380kallsymso_prev="" 381kallsyms_vmlinux="" 382if [ -n "${CONFIG_KALLSYMS}" ]; then 383 384 # kallsyms support 385 # Generate section listing all symbols and add it into vmlinux 386 # It's a three step process: 387 # 1) Link .tmp_vmlinux1 so it has all symbols and sections, 388 # but __kallsyms is empty. 389 # Running kallsyms on that gives us .tmp_kallsyms1.o with 390 # the right size 391 # 2) Link .tmp_vmlinux2 so it now has a __kallsyms section of 392 # the right size, but due to the added section, some 393 # addresses have shifted. 394 # From here, we generate a correct .tmp_kallsyms2.o 395 # 3) That link may have expanded the kernel image enough that 396 # more linker branch stubs / trampolines had to be added, which 397 # introduces new names, which further expands kallsyms. Do another 398 # pass if that is the case. In theory it's possible this results 399 # in even more stubs, but unlikely. 400 # KALLSYMS_EXTRA_PASS=1 may also used to debug or work around 401 # other bugs. 402 # 4) The correct ${kallsymso} is linked into the final vmlinux. 403 # 404 # a) Verify that the System.map from vmlinux matches the map from 405 # ${kallsymso}. 406 407 kallsyms_step 1 408 kallsyms_step 2 409 410 # step 3 411 size1=$(${CONFIG_SHELL} "${srctree}/scripts/file-size.sh" ${kallsymso_prev}) 412 size2=$(${CONFIG_SHELL} "${srctree}/scripts/file-size.sh" ${kallsymso}) 413 414 if [ $size1 -ne $size2 ] || [ -n "${KALLSYMS_EXTRA_PASS}" ]; then 415 kallsyms_step 3 416 fi 417fi 418 419vmlinux_link vmlinux "${kallsymso}" ${btf_vmlinux_bin_o} 420 421# fill in BTF IDs 422if [ -n "${CONFIG_DEBUG_INFO_BTF}" -a -n "${CONFIG_BPF}" ]; then 423 info BTFIDS vmlinux 424 ${RESOLVE_BTFIDS} vmlinux 425fi 426 427if [ -n "${CONFIG_BUILDTIME_TABLE_SORT}" ]; then 428 info SORTTAB vmlinux 429 if ! sorttable vmlinux; then 430 echo >&2 Failed to sort kernel tables 431 exit 1 432 fi 433fi 434 435info SYSMAP System.map 436mksysmap vmlinux System.map 437 438# step a (see comment above) 439if [ -n "${CONFIG_KALLSYMS}" ]; then 440 mksysmap ${kallsyms_vmlinux} .tmp_System.map 441 442 if ! cmp -s System.map .tmp_System.map; then 443 echo >&2 Inconsistent kallsyms data 444 echo >&2 Try "make KALLSYMS_EXTRA_PASS=1" as a workaround 445 exit 1 446 fi 447fi 448 449# For fixdep 450echo "vmlinux: $0" > .vmlinux.d 451