1*7705ce5aSSamuel Holland// SPDX-License-Identifier: (GPL-2.0+ or MIT) 2*7705ce5aSSamuel Holland// Copyright (C) 2022 Samuel Holland <samuel@sholland.org> 3*7705ce5aSSamuel Holland 4*7705ce5aSSamuel Holland#include "sun20i-d1-lichee-rv.dts" 5*7705ce5aSSamuel Holland 6*7705ce5aSSamuel Holland/ { 7*7705ce5aSSamuel Holland aliases { 8*7705ce5aSSamuel Holland ethernet0 = &emac; 9*7705ce5aSSamuel Holland ethernet1 = &xr829; 10*7705ce5aSSamuel Holland }; 11*7705ce5aSSamuel Holland 12*7705ce5aSSamuel Holland dmic_codec: dmic-codec { 13*7705ce5aSSamuel Holland compatible = "dmic-codec"; 14*7705ce5aSSamuel Holland num-channels = <2>; 15*7705ce5aSSamuel Holland #sound-dai-cells = <0>; 16*7705ce5aSSamuel Holland }; 17*7705ce5aSSamuel Holland 18*7705ce5aSSamuel Holland dmic-sound { 19*7705ce5aSSamuel Holland compatible = "simple-audio-card"; 20*7705ce5aSSamuel Holland simple-audio-card,name = "DMIC"; 21*7705ce5aSSamuel Holland #address-cells = <1>; 22*7705ce5aSSamuel Holland #size-cells = <0>; 23*7705ce5aSSamuel Holland 24*7705ce5aSSamuel Holland simple-audio-card,dai-link@0 { 25*7705ce5aSSamuel Holland reg = <0>; 26*7705ce5aSSamuel Holland format = "pdm"; 27*7705ce5aSSamuel Holland frame-master = <&link0_cpu>; 28*7705ce5aSSamuel Holland bitclock-master = <&link0_cpu>; 29*7705ce5aSSamuel Holland 30*7705ce5aSSamuel Holland link0_cpu: cpu { 31*7705ce5aSSamuel Holland sound-dai = <&dmic>; 32*7705ce5aSSamuel Holland }; 33*7705ce5aSSamuel Holland 34*7705ce5aSSamuel Holland link0_codec: codec { 35*7705ce5aSSamuel Holland sound-dai = <&dmic_codec>; 36*7705ce5aSSamuel Holland }; 37*7705ce5aSSamuel Holland }; 38*7705ce5aSSamuel Holland }; 39*7705ce5aSSamuel Holland 40*7705ce5aSSamuel Holland /* PC1 is repurposed as BT_WAKE_AP */ 41*7705ce5aSSamuel Holland /delete-node/ leds; 42*7705ce5aSSamuel Holland 43*7705ce5aSSamuel Holland wifi_pwrseq: wifi-pwrseq { 44*7705ce5aSSamuel Holland compatible = "mmc-pwrseq-simple"; 45*7705ce5aSSamuel Holland clocks = <&ccu CLK_FANOUT1>; 46*7705ce5aSSamuel Holland clock-names = "ext_clock"; 47*7705ce5aSSamuel Holland reset-gpios = <&pio 6 12 GPIO_ACTIVE_LOW>; /* PG12 */ 48*7705ce5aSSamuel Holland assigned-clocks = <&ccu CLK_FANOUT1>; 49*7705ce5aSSamuel Holland assigned-clock-rates = <32768>; 50*7705ce5aSSamuel Holland pinctrl-0 = <&clk_pg11_pin>; 51*7705ce5aSSamuel Holland pinctrl-names = "default"; 52*7705ce5aSSamuel Holland }; 53*7705ce5aSSamuel Holland}; 54*7705ce5aSSamuel Holland 55*7705ce5aSSamuel Holland&dmic { 56*7705ce5aSSamuel Holland pinctrl-0 = <&dmic_pb11_d0_pin>, <&dmic_pe17_clk_pin>; 57*7705ce5aSSamuel Holland pinctrl-names = "default"; 58*7705ce5aSSamuel Holland status = "okay"; 59*7705ce5aSSamuel Holland}; 60*7705ce5aSSamuel Holland 61*7705ce5aSSamuel Holland&ehci1 { 62*7705ce5aSSamuel Holland status = "okay"; 63*7705ce5aSSamuel Holland}; 64*7705ce5aSSamuel Holland 65*7705ce5aSSamuel Holland&emac { 66*7705ce5aSSamuel Holland pinctrl-0 = <&rmii_pe_pins>; 67*7705ce5aSSamuel Holland pinctrl-names = "default"; 68*7705ce5aSSamuel Holland phy-handle = <&ext_rmii_phy>; 69*7705ce5aSSamuel Holland phy-mode = "rmii"; 70*7705ce5aSSamuel Holland phy-supply = <®_vcc_3v3>; 71*7705ce5aSSamuel Holland status = "okay"; 72*7705ce5aSSamuel Holland}; 73*7705ce5aSSamuel Holland 74*7705ce5aSSamuel Holland&mdio { 75*7705ce5aSSamuel Holland ext_rmii_phy: ethernet-phy@1 { 76*7705ce5aSSamuel Holland compatible = "ethernet-phy-ieee802.3-c22"; 77*7705ce5aSSamuel Holland reg = <1>; 78*7705ce5aSSamuel Holland reset-gpios = <&pio 4 16 GPIO_ACTIVE_LOW>; /* PE16 */ 79*7705ce5aSSamuel Holland }; 80*7705ce5aSSamuel Holland}; 81*7705ce5aSSamuel Holland 82*7705ce5aSSamuel Holland&mmc1 { 83*7705ce5aSSamuel Holland bus-width = <4>; 84*7705ce5aSSamuel Holland mmc-pwrseq = <&wifi_pwrseq>; 85*7705ce5aSSamuel Holland non-removable; 86*7705ce5aSSamuel Holland vmmc-supply = <®_vcc_3v3>; 87*7705ce5aSSamuel Holland vqmmc-supply = <®_vcc_3v3>; 88*7705ce5aSSamuel Holland pinctrl-0 = <&mmc1_pins>; 89*7705ce5aSSamuel Holland pinctrl-names = "default"; 90*7705ce5aSSamuel Holland status = "okay"; 91*7705ce5aSSamuel Holland 92*7705ce5aSSamuel Holland xr829: wifi@1 { 93*7705ce5aSSamuel Holland reg = <1>; 94*7705ce5aSSamuel Holland }; 95*7705ce5aSSamuel Holland}; 96*7705ce5aSSamuel Holland 97*7705ce5aSSamuel Holland&ohci1 { 98*7705ce5aSSamuel Holland status = "okay"; 99*7705ce5aSSamuel Holland}; 100*7705ce5aSSamuel Holland 101*7705ce5aSSamuel Holland&uart1 { 102*7705ce5aSSamuel Holland uart-has-rtscts; 103*7705ce5aSSamuel Holland pinctrl-0 = <&uart1_pg6_pins>, <&uart1_pg8_rts_cts_pins>; 104*7705ce5aSSamuel Holland pinctrl-names = "default"; 105*7705ce5aSSamuel Holland status = "okay"; 106*7705ce5aSSamuel Holland 107*7705ce5aSSamuel Holland /* XR829 bluetooth is connected here */ 108*7705ce5aSSamuel Holland}; 109*7705ce5aSSamuel Holland 110*7705ce5aSSamuel Holland&usb_otg { 111*7705ce5aSSamuel Holland status = "disabled"; 112*7705ce5aSSamuel Holland}; 113*7705ce5aSSamuel Holland 114*7705ce5aSSamuel Holland&usbphy { 115*7705ce5aSSamuel Holland /* PD20 and PD21 are repurposed for the LCD panel */ 116*7705ce5aSSamuel Holland /delete-property/ usb0_id_det-gpios; 117*7705ce5aSSamuel Holland /delete-property/ usb0_vbus_det-gpios; 118*7705ce5aSSamuel Holland usb1_vbus-supply = <®_vcc>; 119*7705ce5aSSamuel Holland}; 120