1/* 2 * MPC866 ADS Device Tree Source 3 * 4 * Copyright 2006 MontaVista Software, Inc. 5 * 6 * This program is free software; you can redistribute it and/or modify it 7 * under the terms of the GNU General Public License as published by the 8 * Free Software Foundation; either version 2 of the License, or (at your 9 * option) any later version. 10 */ 11 12 13/ { 14 model = "MPC866ADS"; 15 compatible = "mpc8xx"; 16 #address-cells = <1>; 17 #size-cells = <1>; 18 linux,phandle = <100>; 19 20 cpus { 21 #cpus = <1>; 22 #address-cells = <1>; 23 #size-cells = <0>; 24 linux,phandle = <200>; 25 26 PowerPC,866@0 { 27 device_type = "cpu"; 28 reg = <0>; 29 d-cache-line-size = <20>; // 32 bytes 30 i-cache-line-size = <20>; // 32 bytes 31 d-cache-size = <2000>; // L1, 8K 32 i-cache-size = <4000>; // L1, 16K 33 timebase-frequency = <0>; 34 bus-frequency = <0>; 35 clock-frequency = <0>; 36 32-bit; 37 interrupts = <f 2>; // decrementer interrupt 38 interrupt-parent = <ff000000>; 39 linux,phandle = <201>; 40 }; 41 }; 42 43 memory { 44 device_type = "memory"; 45 linux,phandle = <300>; 46 reg = <00000000 800000>; 47 }; 48 49 soc866@ff000000 { 50 #address-cells = <1>; 51 #size-cells = <1>; 52 #interrupt-cells = <2>; 53 device_type = "soc"; 54 ranges = <0 ff000000 00100000>; 55 reg = <ff000000 00000200>; 56 bus-frequency = <0>; 57 mdio@e80 { 58 device_type = "mdio"; 59 compatible = "fs_enet"; 60 reg = <e80 8>; 61 linux,phandle = <e80>; 62 #address-cells = <1>; 63 #size-cells = <0>; 64 ethernet-phy@f { 65 linux,phandle = <e800f>; 66 reg = <f>; 67 device_type = "ethernet-phy"; 68 }; 69 }; 70 71 fec@e00 { 72 device_type = "network"; 73 compatible = "fs_enet"; 74 model = "FEC"; 75 device-id = <1>; 76 reg = <e00 188>; 77 mac-address = [ 00 00 0C 00 01 FD ]; 78 interrupts = <3 1>; 79 interrupt-parent = <ff000000>; 80 phy-handle = <e800f>; 81 }; 82 83 pic@ff000000 { 84 linux,phandle = <ff000000>; 85 interrupt-controller; 86 #address-cells = <0>; 87 #interrupt-cells = <2>; 88 reg = <0 24>; 89 built-in; 90 device_type = "mpc8xx-pic"; 91 compatible = "CPM"; 92 }; 93 94 cpm@ff000000 { 95 linux,phandle = <ff000000>; 96 #address-cells = <1>; 97 #size-cells = <1>; 98 #interrupt-cells = <2>; 99 device_type = "cpm"; 100 model = "CPM"; 101 ranges = <0 0 4000>; 102 reg = <860 f0>; 103 command-proc = <9c0>; 104 brg-frequency = <0>; 105 interrupts = <0 2>; // cpm error interrupt 106 interrupt-parent = <930>; 107 108 pic@930 { 109 linux,phandle = <930>; 110 interrupt-controller; 111 #address-cells = <0>; 112 #interrupt-cells = <2>; 113 interrupts = <5 2 0 2>; 114 interrupt-parent = <ff000000>; 115 reg = <930 20>; 116 built-in; 117 device_type = "cpm-pic"; 118 compatible = "CPM"; 119 }; 120 121 smc@a80 { 122 device_type = "serial"; 123 compatible = "cpm_uart"; 124 model = "SMC"; 125 device-id = <1>; 126 reg = <a80 10 3e80 40>; 127 clock-setup = <00ffffff 0>; 128 rx-clock = <1>; 129 tx-clock = <1>; 130 current-speed = <0>; 131 interrupts = <4 3>; 132 interrupt-parent = <930>; 133 }; 134 135 smc@a90 { 136 device_type = "serial"; 137 compatible = "cpm_uart"; 138 model = "SMC"; 139 device-id = <2>; 140 reg = <a90 20 3f80 40>; 141 clock-setup = <ff00ffff 90000>; 142 rx-clock = <2>; 143 tx-clock = <2>; 144 current-speed = <0>; 145 interrupts = <3 3>; 146 interrupt-parent = <930>; 147 }; 148 149 scc@a00 { 150 device_type = "network"; 151 compatible = "fs_enet"; 152 model = "SCC"; 153 device-id = <1>; 154 reg = <a00 18 3c00 80>; 155 mac-address = [ 00 00 0C 00 03 FD ]; 156 interrupts = <1e 3>; 157 interrupt-parent = <930>; 158 }; 159 }; 160 }; 161}; 162