1/*
2 * MPC8379E RDB Device Tree Source
3 *
4 * Copyright 2007, 2008 Freescale Semiconductor Inc.
5 *
6 * This program is free software; you can redistribute  it and/or modify it
7 * under  the terms of  the GNU General  Public License as published by the
8 * Free Software Foundation;  either version 2 of the  License, or (at your
9 * option) any later version.
10 */
11
12/dts-v1/;
13
14/ {
15	compatible = "fsl,mpc8379erdb";
16	#address-cells = <1>;
17	#size-cells = <1>;
18
19	aliases {
20		ethernet0 = &enet0;
21		ethernet1 = &enet1;
22		serial0 = &serial0;
23		serial1 = &serial1;
24		pci0 = &pci0;
25	};
26
27	cpus {
28		#address-cells = <1>;
29		#size-cells = <0>;
30
31		PowerPC,8379@0 {
32			device_type = "cpu";
33			reg = <0>;
34			d-cache-line-size = <32>;
35			i-cache-line-size = <32>;
36			d-cache-size = <32768>;
37			i-cache-size = <32768>;
38			timebase-frequency = <0>;
39			bus-frequency = <0>;
40			clock-frequency = <0>;
41		};
42	};
43
44	memory {
45		device_type = "memory";
46		reg = <0x00000000 0x10000000>;	// 256MB at 0
47	};
48
49	localbus@e0005000 {
50		#address-cells = <2>;
51		#size-cells = <1>;
52		compatible = "fsl,mpc8379-elbc", "fsl,elbc", "simple-bus";
53		reg = <0xe0005000 0x1000>;
54		interrupts = <77 8>;
55		interrupt-parent = <&ipic>;
56
57		// CS0 and CS1 are swapped when
58		// booting from nand, but the
59		// addresses are the same.
60		ranges = <0 0 0xfe000000 0x00800000
61		          1 0 0xe0600000 0x00008000
62		          2 0 0xf0000000 0x00020000
63		          3 0 0xfa000000 0x00008000>;
64
65		flash@0,0 {
66			#address-cells = <1>;
67			#size-cells = <1>;
68			compatible = "cfi-flash";
69			reg = <0 0 0x800000>;
70			bank-width = <2>;
71			device-width = <1>;
72		};
73
74		nand@1,0 {
75			#address-cells = <1>;
76			#size-cells = <1>;
77			compatible = "fsl,mpc8379-fcm-nand",
78			             "fsl,elbc-fcm-nand";
79			reg = <1 0 0x8000>;
80
81			u-boot@0 {
82				reg = <0x0 0x100000>;
83				read-only;
84			};
85
86			kernel@100000 {
87				reg = <0x100000 0x300000>;
88			};
89			fs@400000 {
90				reg = <0x400000 0x1c00000>;
91			};
92		};
93	};
94
95	immr@e0000000 {
96		#address-cells = <1>;
97		#size-cells = <1>;
98		device_type = "soc";
99		compatible = "simple-bus";
100		ranges = <0 0xe0000000 0x00100000>;
101		reg = <0xe0000000 0x00000200>;
102		bus-frequency = <0>;
103
104		wdt@200 {
105			device_type = "watchdog";
106			compatible = "mpc83xx_wdt";
107			reg = <0x200 0x100>;
108		};
109
110		i2c@3000 {
111			#address-cells = <1>;
112			#size-cells = <0>;
113			cell-index = <0>;
114			compatible = "fsl-i2c";
115			reg = <0x3000 0x100>;
116			interrupts = <14 8>;
117			interrupt-parent = < &ipic >;
118			dfsrr;
119			rtc@68 {
120				device_type = "rtc";
121				compatible = "dallas,ds1339";
122				reg = <0x68>;
123			};
124		};
125
126		i2c@3100 {
127			#address-cells = <1>;
128			#size-cells = <0>;
129			cell-index = <1>;
130			compatible = "fsl-i2c";
131			reg = <0x3100 0x100>;
132			interrupts = <15 8>;
133			interrupt-parent = < &ipic >;
134			dfsrr;
135		};
136
137		spi@7000 {
138			cell-index = <0>;
139			compatible = "fsl,spi";
140			reg = <0x7000 0x1000>;
141			interrupts = <16 8>;
142			interrupt-parent = < &ipic >;
143			mode = "cpu";
144		};
145
146		/* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
147		usb@23000 {
148			compatible = "fsl-usb2-dr";
149			reg = <0x23000 0x1000>;
150			#address-cells = <1>;
151			#size-cells = <0>;
152			interrupt-parent = < &ipic >;
153			interrupts = <38 8>;
154			phy_type = "utmi";
155		};
156
157		mdio@24520 {
158			#address-cells = <1>;
159			#size-cells = <0>;
160			compatible = "fsl,gianfar-mdio";
161			reg = <0x24520 0x20>;
162			phy2: ethernet-phy@2 {
163				interrupt-parent = < &ipic >;
164				interrupts = <17 8>;
165				reg = <2>;
166				device_type = "ethernet-phy";
167			};
168			phy3: ethernet-phy@3 {
169				interrupt-parent = < &ipic >;
170				interrupts = <18 8>;
171				reg = <3>;
172				device_type = "ethernet-phy";
173			};
174		};
175
176		enet0: ethernet@24000 {
177			cell-index = <0>;
178			device_type = "network";
179			model = "eTSEC";
180			compatible = "gianfar";
181			reg = <0x24000 0x1000>;
182			local-mac-address = [ 00 00 00 00 00 00 ];
183			interrupts = <32 8 33 8 34 8>;
184			phy-connection-type = "mii";
185			interrupt-parent = < &ipic >;
186			phy-handle = < &phy2 >;
187		};
188
189		enet1: ethernet@25000 {
190			cell-index = <1>;
191			device_type = "network";
192			model = "eTSEC";
193			compatible = "gianfar";
194			reg = <0x25000 0x1000>;
195			local-mac-address = [ 00 00 00 00 00 00 ];
196			interrupts = <35 8 36 8 37 8>;
197			phy-connection-type = "mii";
198			interrupt-parent = < &ipic >;
199			phy-handle = < &phy3 >;
200		};
201
202		serial0: serial@4500 {
203			cell-index = <0>;
204			device_type = "serial";
205			compatible = "ns16550";
206			reg = <0x4500 0x100>;
207			clock-frequency = <0>;
208			interrupts = <9 8>;
209			interrupt-parent = < &ipic >;
210		};
211
212		serial1: serial@4600 {
213			cell-index = <1>;
214			device_type = "serial";
215			compatible = "ns16550";
216			reg = <0x4600 0x100>;
217			clock-frequency = <0>;
218			interrupts = <10 8>;
219			interrupt-parent = < &ipic >;
220		};
221
222		crypto@30000 {
223			model = "SEC3";
224			device_type = "crypto";
225			compatible = "talitos";
226			reg = <0x30000 0x10000>;
227			interrupts = <11 8>;
228			interrupt-parent = < &ipic >;
229			/* Rev. 3.0 geometry */
230			num-channels = <4>;
231			channel-fifo-len = <24>;
232			exec-units-mask = <0x000001fe>;
233			descriptor-types-mask = <0x03ab0ebf>;
234		};
235
236		sata@18000 {
237			compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
238			reg = <0x18000 0x1000>;
239			interrupts = <44 8>;
240			interrupt-parent = < &ipic >;
241		};
242
243		sata@19000 {
244			compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
245			reg = <0x19000 0x1000>;
246			interrupts = <45 8>;
247			interrupt-parent = < &ipic >;
248		};
249
250		sata@1a000 {
251			compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
252			reg = <0x1a000 0x1000>;
253			interrupts = <46 8>;
254			interrupt-parent = < &ipic >;
255		};
256
257		sata@1b000 {
258			compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
259			reg = <0x1b000 0x1000>;
260			interrupts = <47 8>;
261			interrupt-parent = < &ipic >;
262		};
263
264		/* IPIC
265		 * interrupts cell = <intr #, sense>
266		 * sense values match linux IORESOURCE_IRQ_* defines:
267		 * sense == 8: Level, low assertion
268		 * sense == 2: Edge, high-to-low change
269		 */
270		ipic: interrupt-controller@700 {
271			compatible = "fsl,ipic";
272			interrupt-controller;
273			#address-cells = <0>;
274			#interrupt-cells = <2>;
275			reg = <0x700 0x100>;
276		};
277	};
278
279	pci0: pci@e0008500 {
280		interrupt-map-mask = <0xf800 0 0 7>;
281		interrupt-map = <
282				/* IRQ5 = 21 = 0x15, IRQ6 = 0x16, IRQ7 = 23 = 0x17 */
283
284				/* IDSEL AD14 IRQ6 inta */
285				 0x7000 0 0 1 &ipic 22 8
286
287				/* IDSEL AD15 IRQ5 inta, IRQ6 intb, IRQ7 intd */
288				 0x7800 0 0 1 &ipic 21 8
289				 0x7800 0 0 2 &ipic 22 8
290				 0x7800 0 0 4 &ipic 23 8
291
292				/* IDSEL AD28 IRQ7 inta, IRQ5 intb IRQ6 intc*/
293				 0xE000 0 0 1 &ipic 23 8
294				 0xE000 0 0 2 &ipic 21 8
295				 0xE000 0 0 3 &ipic 22 8>;
296		interrupt-parent = < &ipic >;
297		interrupts = <66 8>;
298		bus-range = <0 0>;
299		ranges = <0x02000000 0 0x90000000 0x90000000 0 0x10000000
300		          0x42000000 0 0x80000000 0x80000000 0 0x10000000
301		          0x01000000 0 0x00000000 0xe2000000 0 0x00100000>;
302		clock-frequency = <66666666>;
303		#interrupt-cells = <1>;
304		#size-cells = <2>;
305		#address-cells = <3>;
306		reg = <0xe0008500 0x100>;
307		compatible = "fsl,mpc8349-pci";
308		device_type = "pci";
309	};
310};
311