1/* 2 * MPC8378E RDB Device Tree Source 3 * 4 * Copyright 2007, 2008 Freescale Semiconductor Inc. 5 * 6 * This program is free software; you can redistribute it and/or modify it 7 * under the terms of the GNU General Public License as published by the 8 * Free Software Foundation; either version 2 of the License, or (at your 9 * option) any later version. 10 */ 11 12/dts-v1/; 13 14/ { 15 compatible = "fsl,mpc8378rdb"; 16 #address-cells = <1>; 17 #size-cells = <1>; 18 19 aliases { 20 ethernet0 = &enet0; 21 ethernet1 = &enet1; 22 serial0 = &serial0; 23 serial1 = &serial1; 24 pci0 = &pci0; 25 }; 26 27 cpus { 28 #address-cells = <1>; 29 #size-cells = <0>; 30 31 PowerPC,8378@0 { 32 device_type = "cpu"; 33 reg = <0x0>; 34 d-cache-line-size = <32>; 35 i-cache-line-size = <32>; 36 d-cache-size = <32768>; 37 i-cache-size = <32768>; 38 timebase-frequency = <0>; 39 bus-frequency = <0>; 40 clock-frequency = <0>; 41 }; 42 }; 43 44 memory { 45 device_type = "memory"; 46 reg = <0x00000000 0x10000000>; // 256MB at 0 47 }; 48 49 localbus@e0005000 { 50 #address-cells = <2>; 51 #size-cells = <1>; 52 compatible = "fsl,mpc8378-elbc", "fsl,elbc", "simple-bus"; 53 reg = <0xe0005000 0x1000>; 54 interrupts = <77 0x8>; 55 interrupt-parent = <&ipic>; 56 57 // CS0 and CS1 are swapped when 58 // booting from nand, but the 59 // addresses are the same. 60 ranges = <0x0 0x0 0xfe000000 0x00800000 61 0x1 0x0 0xe0600000 0x00008000 62 0x2 0x0 0xf0000000 0x00020000 63 0x3 0x0 0xfa000000 0x00008000>; 64 65 flash@0,0 { 66 #address-cells = <1>; 67 #size-cells = <1>; 68 compatible = "cfi-flash"; 69 reg = <0x0 0x0 0x800000>; 70 bank-width = <2>; 71 device-width = <1>; 72 }; 73 74 nand@1,0 { 75 #address-cells = <1>; 76 #size-cells = <1>; 77 compatible = "fsl,mpc8378-fcm-nand", 78 "fsl,elbc-fcm-nand"; 79 reg = <0x1 0x0 0x8000>; 80 81 u-boot@0 { 82 reg = <0x0 0x100000>; 83 read-only; 84 }; 85 86 kernel@100000 { 87 reg = <0x100000 0x300000>; 88 }; 89 fs@400000 { 90 reg = <0x400000 0x1c00000>; 91 }; 92 }; 93 }; 94 95 immr@e0000000 { 96 #address-cells = <1>; 97 #size-cells = <1>; 98 device_type = "soc"; 99 compatible = "simple-bus"; 100 ranges = <0x0 0xe0000000 0x00100000>; 101 reg = <0xe0000000 0x00000200>; 102 bus-frequency = <0>; 103 104 wdt@200 { 105 device_type = "watchdog"; 106 compatible = "mpc83xx_wdt"; 107 reg = <0x200 0x100>; 108 }; 109 110 i2c@3000 { 111 #address-cells = <1>; 112 #size-cells = <0>; 113 cell-index = <0>; 114 compatible = "fsl-i2c"; 115 reg = <0x3000 0x100>; 116 interrupts = <14 0x8>; 117 interrupt-parent = <&ipic>; 118 dfsrr; 119 rtc@68 { 120 device_type = "rtc"; 121 compatible = "dallas,ds1339"; 122 reg = <0x68>; 123 }; 124 125 mcu_pio: mcu@a { 126 #gpio-cells = <2>; 127 compatible = "fsl,mc9s08qg8-mpc8378erdb", 128 "fsl,mcu-mpc8349emitx"; 129 reg = <0x0a>; 130 gpio-controller; 131 }; 132 }; 133 134 i2c@3100 { 135 #address-cells = <1>; 136 #size-cells = <0>; 137 cell-index = <1>; 138 compatible = "fsl-i2c"; 139 reg = <0x3100 0x100>; 140 interrupts = <15 0x8>; 141 interrupt-parent = <&ipic>; 142 dfsrr; 143 }; 144 145 spi@7000 { 146 cell-index = <0>; 147 compatible = "fsl,spi"; 148 reg = <0x7000 0x1000>; 149 interrupts = <16 0x8>; 150 interrupt-parent = <&ipic>; 151 mode = "cpu"; 152 }; 153 154 dma@82a8 { 155 #address-cells = <1>; 156 #size-cells = <1>; 157 compatible = "fsl,mpc8378-dma", "fsl,elo-dma"; 158 reg = <0x82a8 4>; 159 ranges = <0 0x8100 0x1a8>; 160 interrupt-parent = <&ipic>; 161 interrupts = <71 8>; 162 cell-index = <0>; 163 dma-channel@0 { 164 compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel"; 165 reg = <0 0x80>; 166 cell-index = <0>; 167 interrupt-parent = <&ipic>; 168 interrupts = <71 8>; 169 }; 170 dma-channel@80 { 171 compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel"; 172 reg = <0x80 0x80>; 173 cell-index = <1>; 174 interrupt-parent = <&ipic>; 175 interrupts = <71 8>; 176 }; 177 dma-channel@100 { 178 compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel"; 179 reg = <0x100 0x80>; 180 cell-index = <2>; 181 interrupt-parent = <&ipic>; 182 interrupts = <71 8>; 183 }; 184 dma-channel@180 { 185 compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel"; 186 reg = <0x180 0x28>; 187 cell-index = <3>; 188 interrupt-parent = <&ipic>; 189 interrupts = <71 8>; 190 }; 191 }; 192 193 usb@23000 { 194 compatible = "fsl-usb2-dr"; 195 reg = <0x23000 0x1000>; 196 #address-cells = <1>; 197 #size-cells = <0>; 198 interrupt-parent = <&ipic>; 199 interrupts = <38 0x8>; 200 phy_type = "ulpi"; 201 }; 202 203 mdio@24520 { 204 #address-cells = <1>; 205 #size-cells = <0>; 206 compatible = "fsl,gianfar-mdio"; 207 reg = <0x24520 0x20>; 208 phy2: ethernet-phy@2 { 209 interrupt-parent = <&ipic>; 210 interrupts = <17 0x8>; 211 reg = <0x2>; 212 device_type = "ethernet-phy"; 213 }; 214 tbi0: tbi-phy@11 { 215 reg = <0x11>; 216 device_type = "tbi-phy"; 217 }; 218 }; 219 220 mdio@25520 { 221 #address-cells = <1>; 222 #size-cells = <0>; 223 compatible = "fsl,gianfar-tbi"; 224 reg = <0x25520 0x20>; 225 226 tbi1: tbi-phy@11 { 227 reg = <0x11>; 228 device_type = "tbi-phy"; 229 }; 230 }; 231 232 233 enet0: ethernet@24000 { 234 cell-index = <0>; 235 device_type = "network"; 236 model = "eTSEC"; 237 compatible = "gianfar"; 238 reg = <0x24000 0x1000>; 239 local-mac-address = [ 00 00 00 00 00 00 ]; 240 interrupts = <32 0x8 33 0x8 34 0x8>; 241 phy-connection-type = "mii"; 242 interrupt-parent = <&ipic>; 243 phy-handle = <&phy2>; 244 }; 245 246 enet1: ethernet@25000 { 247 cell-index = <1>; 248 device_type = "network"; 249 model = "eTSEC"; 250 compatible = "gianfar"; 251 reg = <0x25000 0x1000>; 252 local-mac-address = [ 00 00 00 00 00 00 ]; 253 interrupts = <35 0x8 36 0x8 37 0x8>; 254 phy-connection-type = "mii"; 255 interrupt-parent = <&ipic>; 256 fixed-link = <1 1 1000 0 0>; 257 }; 258 259 serial0: serial@4500 { 260 cell-index = <0>; 261 device_type = "serial"; 262 compatible = "ns16550"; 263 reg = <0x4500 0x100>; 264 clock-frequency = <0>; 265 interrupts = <9 0x8>; 266 interrupt-parent = <&ipic>; 267 }; 268 269 serial1: serial@4600 { 270 cell-index = <1>; 271 device_type = "serial"; 272 compatible = "ns16550"; 273 reg = <0x4600 0x100>; 274 clock-frequency = <0>; 275 interrupts = <10 0x8>; 276 interrupt-parent = <&ipic>; 277 }; 278 279 crypto@30000 { 280 compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2", 281 "fsl,sec2.1", "fsl,sec2.0"; 282 reg = <0x30000 0x10000>; 283 interrupts = <11 0x8>; 284 interrupt-parent = <&ipic>; 285 fsl,num-channels = <4>; 286 fsl,channel-fifo-len = <24>; 287 fsl,exec-units-mask = <0x9fe>; 288 fsl,descriptor-types-mask = <0x3ab0ebf>; 289 }; 290 291 /* IPIC 292 * interrupts cell = <intr #, sense> 293 * sense values match linux IORESOURCE_IRQ_* defines: 294 * sense == 8: Level, low assertion 295 * sense == 2: Edge, high-to-low change 296 */ 297 ipic: interrupt-controller@700 { 298 compatible = "fsl,ipic"; 299 interrupt-controller; 300 #address-cells = <0>; 301 #interrupt-cells = <2>; 302 reg = <0x700 0x100>; 303 }; 304 }; 305 306 pci0: pci@e0008500 { 307 interrupt-map-mask = <0xf800 0 0 7>; 308 interrupt-map = < 309 /* IRQ5 = 21 = 0x15, IRQ6 = 0x16, IRQ7 = 23 = 0x17 */ 310 311 /* IDSEL AD14 IRQ6 inta */ 312 0x7000 0x0 0x0 0x1 &ipic 22 0x8 313 314 /* IDSEL AD15 IRQ5 inta, IRQ6 intb, IRQ7 intd */ 315 0x7800 0x0 0x0 0x1 &ipic 21 0x8 316 0x7800 0x0 0x0 0x2 &ipic 22 0x8 317 0x7800 0x0 0x0 0x4 &ipic 23 0x8 318 319 /* IDSEL AD28 IRQ7 inta, IRQ5 intb IRQ6 intc*/ 320 0xE000 0x0 0x0 0x1 &ipic 23 0x8 321 0xE000 0x0 0x0 0x2 &ipic 21 0x8 322 0xE000 0x0 0x0 0x3 &ipic 22 0x8>; 323 interrupt-parent = <&ipic>; 324 interrupts = <66 0x8>; 325 bus-range = <0 0>; 326 ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000 327 0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000 328 0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>; 329 clock-frequency = <66666666>; 330 #interrupt-cells = <1>; 331 #size-cells = <2>; 332 #address-cells = <3>; 333 reg = <0xe0008500 0x100 /* internal registers */ 334 0xe0008300 0x8>; /* config space access registers */ 335 compatible = "fsl,mpc8349-pci"; 336 device_type = "pci"; 337 }; 338}; 339