1/* 2 * MPC8378E RDB Device Tree Source 3 * 4 * Copyright 2007, 2008 Freescale Semiconductor Inc. 5 * 6 * This program is free software; you can redistribute it and/or modify it 7 * under the terms of the GNU General Public License as published by the 8 * Free Software Foundation; either version 2 of the License, or (at your 9 * option) any later version. 10 */ 11 12/dts-v1/; 13 14/ { 15 compatible = "fsl,mpc8378rdb"; 16 #address-cells = <1>; 17 #size-cells = <1>; 18 19 aliases { 20 ethernet0 = &enet0; 21 ethernet1 = &enet1; 22 serial0 = &serial0; 23 serial1 = &serial1; 24 pci0 = &pci0; 25 }; 26 27 cpus { 28 #address-cells = <1>; 29 #size-cells = <0>; 30 31 PowerPC,8378@0 { 32 device_type = "cpu"; 33 reg = <0x0>; 34 d-cache-line-size = <32>; 35 i-cache-line-size = <32>; 36 d-cache-size = <32768>; 37 i-cache-size = <32768>; 38 timebase-frequency = <0>; 39 bus-frequency = <0>; 40 clock-frequency = <0>; 41 }; 42 }; 43 44 memory { 45 device_type = "memory"; 46 reg = <0x00000000 0x10000000>; // 256MB at 0 47 }; 48 49 localbus@e0005000 { 50 #address-cells = <2>; 51 #size-cells = <1>; 52 compatible = "fsl,mpc8378-elbc", "fsl,elbc", "simple-bus"; 53 reg = <0xe0005000 0x1000>; 54 interrupts = <77 0x8>; 55 interrupt-parent = <&ipic>; 56 57 // CS0 and CS1 are swapped when 58 // booting from nand, but the 59 // addresses are the same. 60 ranges = <0x0 0x0 0xfe000000 0x00800000 61 0x1 0x0 0xe0600000 0x00008000 62 0x2 0x0 0xf0000000 0x00020000 63 0x3 0x0 0xfa000000 0x00008000>; 64 65 flash@0,0 { 66 #address-cells = <1>; 67 #size-cells = <1>; 68 compatible = "cfi-flash"; 69 reg = <0x0 0x0 0x800000>; 70 bank-width = <2>; 71 device-width = <1>; 72 }; 73 74 nand@1,0 { 75 #address-cells = <1>; 76 #size-cells = <1>; 77 compatible = "fsl,mpc8378-fcm-nand", 78 "fsl,elbc-fcm-nand"; 79 reg = <0x1 0x0 0x8000>; 80 81 u-boot@0 { 82 reg = <0x0 0x100000>; 83 read-only; 84 }; 85 86 kernel@100000 { 87 reg = <0x100000 0x300000>; 88 }; 89 fs@400000 { 90 reg = <0x400000 0x1c00000>; 91 }; 92 }; 93 }; 94 95 immr@e0000000 { 96 #address-cells = <1>; 97 #size-cells = <1>; 98 device_type = "soc"; 99 compatible = "simple-bus"; 100 ranges = <0x0 0xe0000000 0x00100000>; 101 reg = <0xe0000000 0x00000200>; 102 bus-frequency = <0>; 103 104 wdt@200 { 105 device_type = "watchdog"; 106 compatible = "mpc83xx_wdt"; 107 reg = <0x200 0x100>; 108 }; 109 110 i2c@3000 { 111 #address-cells = <1>; 112 #size-cells = <0>; 113 cell-index = <0>; 114 compatible = "fsl-i2c"; 115 reg = <0x3000 0x100>; 116 interrupts = <14 0x8>; 117 interrupt-parent = <&ipic>; 118 dfsrr; 119 rtc@68 { 120 device_type = "rtc"; 121 compatible = "dallas,ds1339"; 122 reg = <0x68>; 123 }; 124 }; 125 126 i2c@3100 { 127 #address-cells = <1>; 128 #size-cells = <0>; 129 cell-index = <1>; 130 compatible = "fsl-i2c"; 131 reg = <0x3100 0x100>; 132 interrupts = <15 0x8>; 133 interrupt-parent = <&ipic>; 134 dfsrr; 135 }; 136 137 spi@7000 { 138 cell-index = <0>; 139 compatible = "fsl,spi"; 140 reg = <0x7000 0x1000>; 141 interrupts = <16 0x8>; 142 interrupt-parent = <&ipic>; 143 mode = "cpu"; 144 }; 145 146 usb@23000 { 147 compatible = "fsl-usb2-dr"; 148 reg = <0x23000 0x1000>; 149 #address-cells = <1>; 150 #size-cells = <0>; 151 interrupt-parent = <&ipic>; 152 interrupts = <38 0x8>; 153 phy_type = "ulpi"; 154 }; 155 156 mdio@24520 { 157 #address-cells = <1>; 158 #size-cells = <0>; 159 compatible = "fsl,gianfar-mdio"; 160 reg = <0x24520 0x20>; 161 phy2: ethernet-phy@2 { 162 interrupt-parent = <&ipic>; 163 interrupts = <17 0x8>; 164 reg = <0x2>; 165 device_type = "ethernet-phy"; 166 }; 167 phy3: ethernet-phy@3 { 168 interrupt-parent = <&ipic>; 169 interrupts = <18 0x8>; 170 reg = <0x3>; 171 device_type = "ethernet-phy"; 172 }; 173 }; 174 175 enet0: ethernet@24000 { 176 cell-index = <0>; 177 device_type = "network"; 178 model = "eTSEC"; 179 compatible = "gianfar"; 180 reg = <0x24000 0x1000>; 181 local-mac-address = [ 00 00 00 00 00 00 ]; 182 interrupts = <32 0x8 33 0x8 34 0x8>; 183 phy-connection-type = "mii"; 184 interrupt-parent = <&ipic>; 185 phy-handle = <&phy2>; 186 }; 187 188 enet1: ethernet@25000 { 189 cell-index = <1>; 190 device_type = "network"; 191 model = "eTSEC"; 192 compatible = "gianfar"; 193 reg = <0x25000 0x1000>; 194 local-mac-address = [ 00 00 00 00 00 00 ]; 195 interrupts = <35 0x8 36 0x8 37 0x8>; 196 phy-connection-type = "mii"; 197 interrupt-parent = <&ipic>; 198 phy-handle = <&phy3>; 199 }; 200 201 serial0: serial@4500 { 202 cell-index = <0>; 203 device_type = "serial"; 204 compatible = "ns16550"; 205 reg = <0x4500 0x100>; 206 clock-frequency = <0>; 207 interrupts = <9 0x8>; 208 interrupt-parent = <&ipic>; 209 }; 210 211 serial1: serial@4600 { 212 cell-index = <1>; 213 device_type = "serial"; 214 compatible = "ns16550"; 215 reg = <0x4600 0x100>; 216 clock-frequency = <0>; 217 interrupts = <10 0x8>; 218 interrupt-parent = <&ipic>; 219 }; 220 221 crypto@30000 { 222 model = "SEC3"; 223 device_type = "crypto"; 224 compatible = "talitos"; 225 reg = <0x30000 0x10000>; 226 interrupts = <11 0x8>; 227 interrupt-parent = <&ipic>; 228 /* Rev. 3.0 geometry */ 229 num-channels = <4>; 230 channel-fifo-len = <24>; 231 exec-units-mask = <0x000001fe>; 232 descriptor-types-mask = <0x03ab0ebf>; 233 }; 234 235 /* IPIC 236 * interrupts cell = <intr #, sense> 237 * sense values match linux IORESOURCE_IRQ_* defines: 238 * sense == 8: Level, low assertion 239 * sense == 2: Edge, high-to-low change 240 */ 241 ipic: interrupt-controller@700 { 242 compatible = "fsl,ipic"; 243 interrupt-controller; 244 #address-cells = <0>; 245 #interrupt-cells = <2>; 246 reg = <0x700 0x100>; 247 }; 248 }; 249 250 pci0: pci@e0008500 { 251 interrupt-map-mask = <0xf800 0 0 7>; 252 interrupt-map = < 253 /* IRQ5 = 21 = 0x15, IRQ6 = 0x16, IRQ7 = 23 = 0x17 */ 254 255 /* IDSEL AD14 IRQ6 inta */ 256 0x7000 0x0 0x0 0x1 &ipic 22 0x8 257 258 /* IDSEL AD15 IRQ5 inta, IRQ6 intb, IRQ7 intd */ 259 0x7800 0x0 0x0 0x1 &ipic 21 0x8 260 0x7800 0x0 0x0 0x2 &ipic 22 0x8 261 0x7800 0x0 0x0 0x4 &ipic 23 0x8 262 263 /* IDSEL AD28 IRQ7 inta, IRQ5 intb IRQ6 intc*/ 264 0xE000 0x0 0x0 0x1 &ipic 23 0x8 265 0xE000 0x0 0x0 0x2 &ipic 21 0x8 266 0xE000 0x0 0x0 0x3 &ipic 22 0x8>; 267 interrupt-parent = <&ipic>; 268 interrupts = <66 0x8>; 269 bus-range = <0 0>; 270 ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000 271 0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000 272 0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>; 273 clock-frequency = <66666666>; 274 #interrupt-cells = <1>; 275 #size-cells = <2>; 276 #address-cells = <3>; 277 reg = <0xe0008500 0x100>; 278 compatible = "fsl,mpc8349-pci"; 279 device_type = "pci"; 280 }; 281}; 282