1/*
2 * MPC8378E RDB Device Tree Source
3 *
4 * Copyright 2007, 2008 Freescale Semiconductor Inc.
5 *
6 * This program is free software; you can redistribute  it and/or modify it
7 * under  the terms of  the GNU General  Public License as published by the
8 * Free Software Foundation;  either version 2 of the  License, or (at your
9 * option) any later version.
10 */
11
12/dts-v1/;
13
14/ {
15	compatible = "fsl,mpc8378rdb";
16	#address-cells = <1>;
17	#size-cells = <1>;
18
19	aliases {
20		ethernet0 = &enet0;
21		ethernet1 = &enet1;
22		serial0 = &serial0;
23		serial1 = &serial1;
24		pci0 = &pci0;
25	};
26
27	cpus {
28		#address-cells = <1>;
29		#size-cells = <0>;
30
31		PowerPC,8378@0 {
32			device_type = "cpu";
33			reg = <0x0>;
34			d-cache-line-size = <32>;
35			i-cache-line-size = <32>;
36			d-cache-size = <32768>;
37			i-cache-size = <32768>;
38			timebase-frequency = <0>;
39			bus-frequency = <0>;
40			clock-frequency = <0>;
41		};
42	};
43
44	memory {
45		device_type = "memory";
46		reg = <0x00000000 0x10000000>;	// 256MB at 0
47	};
48
49	localbus@e0005000 {
50		#address-cells = <2>;
51		#size-cells = <1>;
52		compatible = "fsl,mpc8378-elbc", "fsl,elbc", "simple-bus";
53		reg = <0xe0005000 0x1000>;
54		interrupts = <77 0x8>;
55		interrupt-parent = <&ipic>;
56
57		// CS0 and CS1 are swapped when
58		// booting from nand, but the
59		// addresses are the same.
60		ranges = <0x0 0x0 0xfe000000 0x00800000
61		          0x1 0x0 0xe0600000 0x00008000
62		          0x2 0x0 0xf0000000 0x00020000
63		          0x3 0x0 0xfa000000 0x00008000>;
64
65		flash@0,0 {
66			#address-cells = <1>;
67			#size-cells = <1>;
68			compatible = "cfi-flash";
69			reg = <0x0 0x0 0x800000>;
70			bank-width = <2>;
71			device-width = <1>;
72		};
73
74		nand@1,0 {
75			#address-cells = <1>;
76			#size-cells = <1>;
77			compatible = "fsl,mpc8378-fcm-nand",
78			             "fsl,elbc-fcm-nand";
79			reg = <0x1 0x0 0x8000>;
80
81			u-boot@0 {
82				reg = <0x0 0x100000>;
83				read-only;
84			};
85
86			kernel@100000 {
87				reg = <0x100000 0x300000>;
88			};
89			fs@400000 {
90				reg = <0x400000 0x1c00000>;
91			};
92		};
93	};
94
95	immr@e0000000 {
96		#address-cells = <1>;
97		#size-cells = <1>;
98		device_type = "soc";
99		compatible = "simple-bus";
100		ranges = <0x0 0xe0000000 0x00100000>;
101		reg = <0xe0000000 0x00000200>;
102		bus-frequency = <0>;
103
104		wdt@200 {
105			device_type = "watchdog";
106			compatible = "mpc83xx_wdt";
107			reg = <0x200 0x100>;
108		};
109
110		i2c@3000 {
111			#address-cells = <1>;
112			#size-cells = <0>;
113			cell-index = <0>;
114			compatible = "fsl-i2c";
115			reg = <0x3000 0x100>;
116			interrupts = <14 0x8>;
117			interrupt-parent = <&ipic>;
118			dfsrr;
119			rtc@68 {
120				compatible = "dallas,ds1339";
121				reg = <0x68>;
122			};
123
124			mcu_pio: mcu@a {
125				#gpio-cells = <2>;
126				compatible = "fsl,mc9s08qg8-mpc8378erdb",
127					     "fsl,mcu-mpc8349emitx";
128				reg = <0x0a>;
129				gpio-controller;
130			};
131		};
132
133		i2c@3100 {
134			#address-cells = <1>;
135			#size-cells = <0>;
136			cell-index = <1>;
137			compatible = "fsl-i2c";
138			reg = <0x3100 0x100>;
139			interrupts = <15 0x8>;
140			interrupt-parent = <&ipic>;
141			dfsrr;
142		};
143
144		spi@7000 {
145			cell-index = <0>;
146			compatible = "fsl,spi";
147			reg = <0x7000 0x1000>;
148			interrupts = <16 0x8>;
149			interrupt-parent = <&ipic>;
150			mode = "cpu";
151		};
152
153		dma@82a8 {
154			#address-cells = <1>;
155			#size-cells = <1>;
156			compatible = "fsl,mpc8378-dma", "fsl,elo-dma";
157			reg = <0x82a8 4>;
158			ranges = <0 0x8100 0x1a8>;
159			interrupt-parent = <&ipic>;
160			interrupts = <71 8>;
161			cell-index = <0>;
162			dma-channel@0 {
163				compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
164				reg = <0 0x80>;
165				cell-index = <0>;
166				interrupt-parent = <&ipic>;
167				interrupts = <71 8>;
168			};
169			dma-channel@80 {
170				compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
171				reg = <0x80 0x80>;
172				cell-index = <1>;
173				interrupt-parent = <&ipic>;
174				interrupts = <71 8>;
175			};
176			dma-channel@100 {
177				compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
178				reg = <0x100 0x80>;
179				cell-index = <2>;
180				interrupt-parent = <&ipic>;
181				interrupts = <71 8>;
182			};
183			dma-channel@180 {
184				compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
185				reg = <0x180 0x28>;
186				cell-index = <3>;
187				interrupt-parent = <&ipic>;
188				interrupts = <71 8>;
189			};
190		};
191
192		usb@23000 {
193			compatible = "fsl-usb2-dr";
194			reg = <0x23000 0x1000>;
195			#address-cells = <1>;
196			#size-cells = <0>;
197			interrupt-parent = <&ipic>;
198			interrupts = <38 0x8>;
199			phy_type = "ulpi";
200		};
201
202		mdio@24520 {
203			#address-cells = <1>;
204			#size-cells = <0>;
205			compatible = "fsl,gianfar-mdio";
206			reg = <0x24520 0x20>;
207			phy2: ethernet-phy@2 {
208				interrupt-parent = <&ipic>;
209				interrupts = <17 0x8>;
210				reg = <0x2>;
211				device_type = "ethernet-phy";
212			};
213			tbi0: tbi-phy@11 {
214				reg = <0x11>;
215				device_type = "tbi-phy";
216			};
217		};
218
219		mdio@25520 {
220			#address-cells = <1>;
221			#size-cells = <0>;
222			compatible = "fsl,gianfar-tbi";
223			reg = <0x25520 0x20>;
224
225			tbi1: tbi-phy@11 {
226				reg = <0x11>;
227				device_type = "tbi-phy";
228			};
229		};
230
231
232		enet0: ethernet@24000 {
233			cell-index = <0>;
234			device_type = "network";
235			model = "eTSEC";
236			compatible = "gianfar";
237			reg = <0x24000 0x1000>;
238			local-mac-address = [ 00 00 00 00 00 00 ];
239			interrupts = <32 0x8 33 0x8 34 0x8>;
240			phy-connection-type = "mii";
241			interrupt-parent = <&ipic>;
242			phy-handle = <&phy2>;
243		};
244
245		enet1: ethernet@25000 {
246			cell-index = <1>;
247			device_type = "network";
248			model = "eTSEC";
249			compatible = "gianfar";
250			reg = <0x25000 0x1000>;
251			local-mac-address = [ 00 00 00 00 00 00 ];
252			interrupts = <35 0x8 36 0x8 37 0x8>;
253			phy-connection-type = "mii";
254			interrupt-parent = <&ipic>;
255			fixed-link = <1 1 1000 0 0>;
256		};
257
258		serial0: serial@4500 {
259			cell-index = <0>;
260			device_type = "serial";
261			compatible = "ns16550";
262			reg = <0x4500 0x100>;
263			clock-frequency = <0>;
264			interrupts = <9 0x8>;
265			interrupt-parent = <&ipic>;
266		};
267
268		serial1: serial@4600 {
269			cell-index = <1>;
270			device_type = "serial";
271			compatible = "ns16550";
272			reg = <0x4600 0x100>;
273			clock-frequency = <0>;
274			interrupts = <10 0x8>;
275			interrupt-parent = <&ipic>;
276		};
277
278		crypto@30000 {
279			compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
280				     "fsl,sec2.1", "fsl,sec2.0";
281			reg = <0x30000 0x10000>;
282			interrupts = <11 0x8>;
283			interrupt-parent = <&ipic>;
284			fsl,num-channels = <4>;
285			fsl,channel-fifo-len = <24>;
286			fsl,exec-units-mask = <0x9fe>;
287			fsl,descriptor-types-mask = <0x3ab0ebf>;
288		};
289
290		/* IPIC
291		 * interrupts cell = <intr #, sense>
292		 * sense values match linux IORESOURCE_IRQ_* defines:
293		 * sense == 8: Level, low assertion
294		 * sense == 2: Edge, high-to-low change
295		 */
296		ipic: interrupt-controller@700 {
297			compatible = "fsl,ipic";
298			interrupt-controller;
299			#address-cells = <0>;
300			#interrupt-cells = <2>;
301			reg = <0x700 0x100>;
302		};
303	};
304
305	pci0: pci@e0008500 {
306		interrupt-map-mask = <0xf800 0 0 7>;
307		interrupt-map = <
308				/* IRQ5 = 21 = 0x15, IRQ6 = 0x16, IRQ7 = 23 = 0x17 */
309
310				/* IDSEL AD14 IRQ6 inta */
311				 0x7000 0x0 0x0 0x1 &ipic 22 0x8
312
313				/* IDSEL AD15 IRQ5 inta, IRQ6 intb, IRQ7 intd */
314				 0x7800 0x0 0x0 0x1 &ipic 21 0x8
315				 0x7800 0x0 0x0 0x2 &ipic 22 0x8
316				 0x7800 0x0 0x0 0x4 &ipic 23 0x8
317
318				/* IDSEL AD28 IRQ7 inta, IRQ5 intb IRQ6 intc*/
319				 0xE000 0x0 0x0 0x1 &ipic 23 0x8
320				 0xE000 0x0 0x0 0x2 &ipic 21 0x8
321				 0xE000 0x0 0x0 0x3 &ipic 22 0x8>;
322		interrupt-parent = <&ipic>;
323		interrupts = <66 0x8>;
324		bus-range = <0 0>;
325		ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
326		          0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
327		          0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>;
328		clock-frequency = <66666666>;
329		#interrupt-cells = <1>;
330		#size-cells = <2>;
331		#address-cells = <3>;
332		reg = <0xe0008500 0x100		/* internal registers */
333		       0xe0008300 0x8>;		/* config space access registers */
334		compatible = "fsl,mpc8349-pci";
335		device_type = "pci";
336	};
337};
338