1/*
2 * MPC832x RDB Device Tree Source
3 *
4 * Copyright 2007 Freescale Semiconductor Inc.
5 *
6 * This program is free software; you can redistribute  it and/or modify it
7 * under  the terms of  the GNU General  Public License as published by the
8 * Free Software Foundation;  either version 2 of the  License, or (at your
9 * option) any later version.
10 */
11
12/ {
13	model = "MPC8323ERDB";
14	compatible = "MPC8323ERDB", "MPC832xRDB", "MPC83xxRDB";
15	#address-cells = <1>;
16	#size-cells = <1>;
17
18	cpus {
19		#address-cells = <1>;
20		#size-cells = <0>;
21
22		PowerPC,8323@0 {
23			device_type = "cpu";
24			reg = <0>;
25			d-cache-line-size = <20>;	// 32 bytes
26			i-cache-line-size = <20>;	// 32 bytes
27			d-cache-size = <4000>;		// L1, 16K
28			i-cache-size = <4000>;		// L1, 16K
29			timebase-frequency = <0>;
30			bus-frequency = <0>;
31			clock-frequency = <0>;
32		};
33	};
34
35	memory {
36		device_type = "memory";
37		reg = <00000000 04000000>;
38	};
39
40	soc8323@e0000000 {
41		#address-cells = <1>;
42		#size-cells = <1>;
43		device_type = "soc";
44		ranges = <0 e0000000 00100000>;
45		reg = <e0000000 00000200>;
46		bus-frequency = <0>;
47
48		wdt@200 {
49			device_type = "watchdog";
50			compatible = "mpc83xx_wdt";
51			reg = <200 100>;
52		};
53
54		i2c@3000 {
55			#address-cells = <1>;
56			#size-cells = <0>;
57			cell-index = <0>;
58			compatible = "fsl-i2c";
59			reg = <3000 100>;
60			interrupts = <e 8>;
61			interrupt-parent = <&pic>;
62			dfsrr;
63		};
64
65		serial@4500 {
66			device_type = "serial";
67			compatible = "ns16550";
68			reg = <4500 100>;
69			clock-frequency = <0>;
70			interrupts = <9 8>;
71			interrupt-parent = <&pic>;
72		};
73
74		serial@4600 {
75			device_type = "serial";
76			compatible = "ns16550";
77			reg = <4600 100>;
78			clock-frequency = <0>;
79			interrupts = <a 8>;
80			interrupt-parent = <&pic>;
81		};
82
83		crypto@30000 {
84			device_type = "crypto";
85			model = "SEC2";
86			compatible = "talitos";
87			reg = <30000 7000>;
88			interrupts = <b 8>;
89			interrupt-parent = <&pic>;
90			/* Rev. 2.2 */
91			num-channels = <1>;
92			channel-fifo-len = <18>;
93			exec-units-mask = <0000004c>;
94			descriptor-types-mask = <0122003f>;
95		};
96
97		pic:pic@700 {
98			interrupt-controller;
99			#address-cells = <0>;
100			#interrupt-cells = <2>;
101			reg = <700 100>;
102			device_type = "ipic";
103		};
104
105		par_io@1400 {
106			reg = <1400 100>;
107			device_type = "par_io";
108			num-ports = <7>;
109
110			ucc2pio:ucc_pin@02 {
111				pio-map = <
112			/* port  pin  dir  open_drain  assignment  has_irq */
113					3  4  3  0  2  0 	/* MDIO */
114					3  5  1  0  2  0 	/* MDC */
115					3 15  2  0  1  0 	/* RX_CLK (CLK16) */
116					3 17  2  0  1  0 	/* TX_CLK (CLK3) */
117					0 12  1  0  1  0 	/* TxD0 */
118					0 13  1  0  1  0 	/* TxD1 */
119					0 14  1  0  1  0 	/* TxD2 */
120					0 15  1  0  1  0 	/* TxD3 */
121					0 16  2  0  1  0 	/* RxD0 */
122					0 17  2  0  1  0 	/* RxD1 */
123					0 18  2  0  1  0 	/* RxD2 */
124					0 19  2  0  1  0 	/* RxD3 */
125					0 1a  2  0  1  0 	/* RX_ER */
126					0 1b  1  0  1  0 	/* TX_ER */
127					0 1c  2  0  1  0 	/* RX_DV */
128					0 1d  2  0  1  0 	/* COL */
129					0 1e  1  0  1  0 	/* TX_EN */
130					0 1f  2  0  1  0>;      /* CRS */
131			};
132			ucc3pio:ucc_pin@03 {
133				pio-map = <
134			/* port  pin  dir  open_drain  assignment  has_irq */
135					0  d  2  0  1  0 	/* RX_CLK (CLK9) */
136					3 18  2  0  1  0 	/* TX_CLK (CLK10) */
137					1  0  1  0  1  0 	/* TxD0 */
138					1  1  1  0  1  0 	/* TxD1 */
139					1  2  1  0  1  0 	/* TxD2 */
140					1  3  1  0  1  0 	/* TxD3 */
141					1  4  2  0  1  0 	/* RxD0 */
142					1  5  2  0  1  0 	/* RxD1 */
143					1  6  2  0  1  0 	/* RxD2 */
144					1  7  2  0  1  0 	/* RxD3 */
145					1  8  2  0  1  0 	/* RX_ER */
146					1  9  1  0  1  0 	/* TX_ER */
147					1  a  2  0  1  0 	/* RX_DV */
148					1  b  2  0  1  0 	/* COL */
149					1  c  1  0  1  0 	/* TX_EN */
150					1  d  2  0  1  0>;      /* CRS */
151			};
152		};
153	};
154
155	qe@e0100000 {
156		#address-cells = <1>;
157		#size-cells = <1>;
158		device_type = "qe";
159		model = "QE";
160		ranges = <0 e0100000 00100000>;
161		reg = <e0100000 480>;
162		brg-frequency = <0>;
163		bus-frequency = <BCD3D80>;
164
165		muram@10000 {
166			device_type = "muram";
167			ranges = <0 00010000 00004000>;
168
169			data-only@0 {
170				reg = <0 4000>;
171			};
172		};
173
174		spi@4c0 {
175			device_type = "spi";
176			compatible = "fsl_spi";
177			reg = <4c0 40>;
178			interrupts = <2>;
179			interrupt-parent = <&qeic>;
180			mode = "cpu-qe";
181		};
182
183		spi@500 {
184			device_type = "spi";
185			compatible = "fsl_spi";
186			reg = <500 40>;
187			interrupts = <1>;
188			interrupt-parent = <&qeic>;
189			mode = "cpu";
190		};
191
192		ucc@3000 {
193			device_type = "network";
194			compatible = "ucc_geth";
195			model = "UCC";
196			device-id = <2>;
197			reg = <3000 200>;
198			interrupts = <21>;
199			interrupt-parent = <&qeic>;
200			/*
201			 * mac-address is deprecated and will be removed
202			 * in 2.6.25.  Only recent versions of
203			 * U-Boot support local-mac-address, however.
204			 */
205			mac-address = [ 00 00 00 00 00 00 ];
206			local-mac-address = [ 00 00 00 00 00 00 ];
207			rx-clock = <20>;
208			tx-clock = <13>;
209			phy-handle = <&phy00>;
210			pio-handle = <&ucc2pio>;
211		};
212
213		ucc@2200 {
214			device_type = "network";
215			compatible = "ucc_geth";
216			model = "UCC";
217			device-id = <3>;
218			reg = <2200 200>;
219			interrupts = <22>;
220			interrupt-parent = <&qeic>;
221			/*
222			 * mac-address is deprecated and will be removed
223			 * in 2.6.25.  Only recent versions of
224			 * U-Boot support local-mac-address, however.
225			 */
226			mac-address = [ 00 00 00 00 00 00 ];
227			local-mac-address = [ 00 00 00 00 00 00 ];
228			rx-clock = <19>;
229			tx-clock = <1a>;
230			phy-handle = <&phy04>;
231			pio-handle = <&ucc3pio>;
232		};
233
234		mdio@3120 {
235			#address-cells = <1>;
236			#size-cells = <0>;
237			reg = <3120 18>;
238			device_type = "mdio";
239			compatible = "ucc_geth_phy";
240
241			phy00:ethernet-phy@00 {
242				interrupt-parent = <&pic>;
243				interrupts = <0>;
244				reg = <0>;
245				device_type = "ethernet-phy";
246			};
247			phy04:ethernet-phy@04 {
248				interrupt-parent = <&pic>;
249				interrupts = <0>;
250				reg = <4>;
251				device_type = "ethernet-phy";
252			};
253		};
254
255		qeic:qeic@80 {
256			interrupt-controller;
257			device_type = "qeic";
258			#address-cells = <0>;
259			#interrupt-cells = <1>;
260			reg = <80 80>;
261			big-endian;
262			interrupts = <20 8 21 8>; //high:32 low:33
263			interrupt-parent = <&pic>;
264		};
265	};
266
267	pci@e0008500 {
268		interrupt-map-mask = <f800 0 0 7>;
269		interrupt-map = <
270				/* IDSEL 0x10 AD16 (USB) */
271				 8000 0 0 1 &pic 11 8
272
273				/* IDSEL 0x11 AD17 (Mini1)*/
274				 8800 0 0 1 &pic 12 8
275				 8800 0 0 2 &pic 13 8
276				 8800 0 0 3 &pic 14 8
277				 8800 0 0 4 &pic 30 8
278
279				/* IDSEL 0x12 AD18 (PCI/Mini2) */
280				 9000 0 0 1 &pic 13 8
281				 9000 0 0 2 &pic 14 8
282				 9000 0 0 3 &pic 30 8
283				 9000 0 0 4 &pic 11 8>;
284
285		interrupt-parent = <&pic>;
286		interrupts = <42 8>;
287		bus-range = <0 0>;
288		ranges = <42000000 0 80000000 80000000 0 10000000
289			  02000000 0 90000000 90000000 0 10000000
290			  01000000 0 d0000000 d0000000 0 04000000>;
291		clock-frequency = <0>;
292		#interrupt-cells = <1>;
293		#size-cells = <2>;
294		#address-cells = <3>;
295		reg = <e0008500 100>;
296		compatible = "fsl,mpc8349-pci";
297		device_type = "pci";
298	};
299};
300