1/*
2 * MPC832x RDB Device Tree Source
3 *
4 * Copyright 2007 Freescale Semiconductor Inc.
5 *
6 * This program is free software; you can redistribute  it and/or modify it
7 * under  the terms of  the GNU General  Public License as published by the
8 * Free Software Foundation;  either version 2 of the  License, or (at your
9 * option) any later version.
10 */
11
12/dts-v1/;
13
14/ {
15	model = "MPC8323ERDB";
16	compatible = "MPC8323ERDB", "MPC832xRDB", "MPC83xxRDB";
17	#address-cells = <1>;
18	#size-cells = <1>;
19
20	aliases {
21		ethernet0 = &enet1;
22		ethernet1 = &enet0;
23		serial0 = &serial0;
24		serial1 = &serial1;
25		pci0 = &pci0;
26	};
27
28	cpus {
29		#address-cells = <1>;
30		#size-cells = <0>;
31
32		PowerPC,8323@0 {
33			device_type = "cpu";
34			reg = <0x0>;
35			d-cache-line-size = <0x20>;	// 32 bytes
36			i-cache-line-size = <0x20>;	// 32 bytes
37			d-cache-size = <16384>;	// L1, 16K
38			i-cache-size = <16384>;	// L1, 16K
39			timebase-frequency = <0>;
40			bus-frequency = <0>;
41			clock-frequency = <0>;
42		};
43	};
44
45	memory {
46		device_type = "memory";
47		reg = <0x00000000 0x04000000>;
48	};
49
50	soc8323@e0000000 {
51		#address-cells = <1>;
52		#size-cells = <1>;
53		device_type = "soc";
54		compatible = "simple-bus";
55		ranges = <0x0 0xe0000000 0x00100000>;
56		reg = <0xe0000000 0x00000200>;
57		bus-frequency = <0>;
58
59		wdt@200 {
60			device_type = "watchdog";
61			compatible = "mpc83xx_wdt";
62			reg = <0x200 0x100>;
63		};
64
65		i2c@3000 {
66			#address-cells = <1>;
67			#size-cells = <0>;
68			cell-index = <0>;
69			compatible = "fsl-i2c";
70			reg = <0x3000 0x100>;
71			interrupts = <14 0x8>;
72			interrupt-parent = <&ipic>;
73			dfsrr;
74		};
75
76		serial0: serial@4500 {
77			cell-index = <0>;
78			device_type = "serial";
79			compatible = "ns16550";
80			reg = <0x4500 0x100>;
81			clock-frequency = <0>;
82			interrupts = <9 0x8>;
83			interrupt-parent = <&ipic>;
84		};
85
86		serial1: serial@4600 {
87			cell-index = <1>;
88			device_type = "serial";
89			compatible = "ns16550";
90			reg = <0x4600 0x100>;
91			clock-frequency = <0>;
92			interrupts = <10 0x8>;
93			interrupt-parent = <&ipic>;
94		};
95
96		dma@82a8 {
97			#address-cells = <1>;
98			#size-cells = <1>;
99			compatible = "fsl,mpc8323-dma", "fsl,elo-dma";
100			reg = <0x82a8 4>;
101			ranges = <0 0x8100 0x1a8>;
102			interrupt-parent = <&ipic>;
103			interrupts = <71 8>;
104			cell-index = <0>;
105			dma-channel@0 {
106				compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
107				reg = <0 0x80>;
108				cell-index = <0>;
109				interrupt-parent = <&ipic>;
110				interrupts = <71 8>;
111			};
112			dma-channel@80 {
113				compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
114				reg = <0x80 0x80>;
115				cell-index = <1>;
116				interrupt-parent = <&ipic>;
117				interrupts = <71 8>;
118			};
119			dma-channel@100 {
120				compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
121				reg = <0x100 0x80>;
122				cell-index = <2>;
123				interrupt-parent = <&ipic>;
124				interrupts = <71 8>;
125			};
126			dma-channel@180 {
127				compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
128				reg = <0x180 0x28>;
129				cell-index = <3>;
130				interrupt-parent = <&ipic>;
131				interrupts = <71 8>;
132			};
133		};
134
135		crypto@30000 {
136			compatible = "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0";
137			reg = <0x30000 0x10000>;
138			interrupts = <11 0x8>;
139			interrupt-parent = <&ipic>;
140			fsl,num-channels = <1>;
141			fsl,channel-fifo-len = <24>;
142			fsl,exec-units-mask = <0x4c>;
143			fsl,descriptor-types-mask = <0x0122003f>;
144		};
145
146		ipic:pic@700 {
147			interrupt-controller;
148			#address-cells = <0>;
149			#interrupt-cells = <2>;
150			reg = <0x700 0x100>;
151			device_type = "ipic";
152		};
153
154		par_io@1400 {
155			#address-cells = <1>;
156			#size-cells = <1>;
157			reg = <0x1400 0x100>;
158			ranges = <3 0x1448 0x18>;
159			compatible = "fsl,mpc8323-qe-pario";
160			device_type = "par_io";
161			num-ports = <7>;
162
163			qe_pio_d: gpio-controller@1448 {
164				#gpio-cells = <2>;
165				compatible = "fsl,mpc8323-qe-pario-bank";
166				reg = <3 0x18>;
167				gpio-controller;
168			};
169
170			ucc2pio:ucc_pin@02 {
171				pio-map = <
172			/* port  pin  dir  open_drain  assignment  has_irq */
173					3  4  3  0  2  0 	/* MDIO */
174					3  5  1  0  2  0 	/* MDC */
175					3 21  2  0  1  0 	/* RX_CLK (CLK16) */
176					3 23  2  0  1  0 	/* TX_CLK (CLK3) */
177					0 18  1  0  1  0 	/* TxD0 */
178					0 19  1  0  1  0 	/* TxD1 */
179					0 20  1  0  1  0 	/* TxD2 */
180					0 21  1  0  1  0 	/* TxD3 */
181					0 22  2  0  1  0 	/* RxD0 */
182					0 23  2  0  1  0 	/* RxD1 */
183					0 24  2  0  1  0 	/* RxD2 */
184					0 25  2  0  1  0 	/* RxD3 */
185					0 26  2  0  1  0 	/* RX_ER */
186					0 27  1  0  1  0 	/* TX_ER */
187					0 28  2  0  1  0 	/* RX_DV */
188					0 29  2  0  1  0 	/* COL */
189					0 30  1  0  1  0 	/* TX_EN */
190					0 31  2  0  1  0>;      /* CRS */
191			};
192			ucc3pio:ucc_pin@03 {
193				pio-map = <
194			/* port  pin  dir  open_drain  assignment  has_irq */
195					0 13  2  0  1  0 	/* RX_CLK (CLK9) */
196					3 24  2  0  1  0 	/* TX_CLK (CLK10) */
197					1  0  1  0  1  0 	/* TxD0 */
198					1  1  1  0  1  0 	/* TxD1 */
199					1  2  1  0  1  0 	/* TxD2 */
200					1  3  1  0  1  0 	/* TxD3 */
201					1  4  2  0  1  0 	/* RxD0 */
202					1  5  2  0  1  0 	/* RxD1 */
203					1  6  2  0  1  0 	/* RxD2 */
204					1  7  2  0  1  0 	/* RxD3 */
205					1  8  2  0  1  0 	/* RX_ER */
206					1  9  1  0  1  0 	/* TX_ER */
207					1 10  2  0  1  0 	/* RX_DV */
208					1 11  2  0  1  0 	/* COL */
209					1 12  1  0  1  0 	/* TX_EN */
210					1 13  2  0  1  0>;      /* CRS */
211			};
212		};
213	};
214
215	qe@e0100000 {
216		#address-cells = <1>;
217		#size-cells = <1>;
218		device_type = "qe";
219		compatible = "fsl,qe";
220		ranges = <0x0 0xe0100000 0x00100000>;
221		reg = <0xe0100000 0x480>;
222		brg-frequency = <0>;
223		bus-frequency = <198000000>;
224
225		muram@10000 {
226 			#address-cells = <1>;
227 			#size-cells = <1>;
228			compatible = "fsl,qe-muram", "fsl,cpm-muram";
229			ranges = <0x0 0x00010000 0x00004000>;
230
231			data-only@0 {
232				compatible = "fsl,qe-muram-data",
233					     "fsl,cpm-muram-data";
234				reg = <0x0 0x4000>;
235			};
236		};
237
238		spi@4c0 {
239			#address-cells = <1>;
240			#size-cells = <0>;
241			cell-index = <0>;
242			compatible = "fsl,spi";
243			reg = <0x4c0 0x40>;
244			interrupts = <2>;
245			interrupt-parent = <&qeic>;
246			gpios = <&qe_pio_d 13 0>;
247			mode = "cpu-qe";
248
249			mmc-slot@0 {
250				compatible = "fsl,mpc8323rdb-mmc-slot",
251					     "mmc-spi-slot";
252				reg = <0>;
253				gpios = <&qe_pio_d 14 1
254					 &qe_pio_d 15 0>;
255				voltage-ranges = <3300 3300>;
256				spi-max-frequency = <50000000>;
257			};
258		};
259
260		spi@500 {
261			cell-index = <1>;
262			compatible = "fsl,spi";
263			reg = <0x500 0x40>;
264			interrupts = <1>;
265			interrupt-parent = <&qeic>;
266			mode = "cpu";
267		};
268
269		enet0: ucc@3000 {
270			device_type = "network";
271			compatible = "ucc_geth";
272			cell-index = <2>;
273			reg = <0x3000 0x200>;
274			interrupts = <33>;
275			interrupt-parent = <&qeic>;
276			local-mac-address = [ 00 00 00 00 00 00 ];
277			rx-clock-name = "clk16";
278			tx-clock-name = "clk3";
279			phy-handle = <&phy00>;
280			pio-handle = <&ucc2pio>;
281		};
282
283		enet1: ucc@2200 {
284			device_type = "network";
285			compatible = "ucc_geth";
286			cell-index = <3>;
287			reg = <0x2200 0x200>;
288			interrupts = <34>;
289			interrupt-parent = <&qeic>;
290			local-mac-address = [ 00 00 00 00 00 00 ];
291			rx-clock-name = "clk9";
292			tx-clock-name = "clk10";
293			phy-handle = <&phy04>;
294			pio-handle = <&ucc3pio>;
295		};
296
297		mdio@3120 {
298			#address-cells = <1>;
299			#size-cells = <0>;
300			reg = <0x3120 0x18>;
301			compatible = "fsl,ucc-mdio";
302
303			phy00:ethernet-phy@00 {
304				interrupt-parent = <&ipic>;
305				interrupts = <0>;
306				reg = <0x0>;
307				device_type = "ethernet-phy";
308			};
309			phy04:ethernet-phy@04 {
310				interrupt-parent = <&ipic>;
311				interrupts = <0>;
312				reg = <0x4>;
313				device_type = "ethernet-phy";
314			};
315		};
316
317		qeic:interrupt-controller@80 {
318			interrupt-controller;
319			compatible = "fsl,qe-ic";
320			#address-cells = <0>;
321			#interrupt-cells = <1>;
322			reg = <0x80 0x80>;
323			big-endian;
324			interrupts = <32 0x8 33 0x8>; //high:32 low:33
325			interrupt-parent = <&ipic>;
326		};
327	};
328
329	pci0: pci@e0008500 {
330		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
331		interrupt-map = <
332				/* IDSEL 0x10 AD16 (USB) */
333				 0x8000 0x0 0x0 0x1 &ipic 17 0x8
334
335				/* IDSEL 0x11 AD17 (Mini1)*/
336				 0x8800 0x0 0x0 0x1 &ipic 18 0x8
337				 0x8800 0x0 0x0 0x2 &ipic 19 0x8
338				 0x8800 0x0 0x0 0x3 &ipic 20 0x8
339				 0x8800 0x0 0x0 0x4 &ipic 48 0x8
340
341				/* IDSEL 0x12 AD18 (PCI/Mini2) */
342				 0x9000 0x0 0x0 0x1 &ipic 19 0x8
343				 0x9000 0x0 0x0 0x2 &ipic 20 0x8
344				 0x9000 0x0 0x0 0x3 &ipic 48 0x8
345				 0x9000 0x0 0x0 0x4 &ipic 17 0x8>;
346
347		interrupt-parent = <&ipic>;
348		interrupts = <66 0x8>;
349		bus-range = <0x0 0x0>;
350		ranges = <0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
351			  0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
352			  0x01000000 0x0 0xd0000000 0xd0000000 0x0 0x04000000>;
353		clock-frequency = <0>;
354		#interrupt-cells = <1>;
355		#size-cells = <2>;
356		#address-cells = <3>;
357		reg = <0xe0008500 0x100		/* internal registers */
358		       0xe0008300 0x8>;		/* config space access registers */
359		compatible = "fsl,mpc8349-pci";
360		device_type = "pci";
361	};
362};
363