1/*
2 * Motion-PRO board Device Tree Source
3 *
4 * Copyright (C) 2007 Semihalf
5 * Marian Balakowicz <m8@semihalf.com>
6 *
7 * This program is free software; you can redistribute  it and/or modify it
8 * under  the terms of  the GNU General  Public License as published by the
9 * Free Software Foundation;  either version 2 of the  License, or (at your
10 * option) any later version.
11 */
12
13/include/ "mpc5200b.dtsi"
14
15/ {
16	model = "promess,motionpro";
17	compatible = "promess,motionpro";
18
19	soc5200@f0000000 {
20		timer@600 {	// General Purpose Timer
21			fsl,has-wdt;
22		};
23
24		timer@660 {	// Motion-PRO status LED
25			compatible = "promess,motionpro-led";
26			label = "motionpro-statusled";
27			blink-delay = <100>; // 100 msec
28		};
29
30		timer@670 {	// Motion-PRO ready LED
31			compatible = "promess,motionpro-led";
32			label = "motionpro-readyled";
33		};
34
35		can@900 {
36			status = "disabled";
37		};
38
39		psc@2000 {		// PSC1
40			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
41		};
42
43		// PSC2 in spi master mode
44		psc@2200 {		// PSC2
45			compatible = "fsl,mpc5200b-psc-spi","fsl,mpc5200-psc-spi";
46			cell-index = <1>;
47		};
48
49		psc@2400 {		// PSC3
50			status = "disabled";
51		};
52
53		psc@2600 {		// PSC4
54			status = "disabled";
55		};
56
57		psc@2800 {		// PSC5
58			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
59		};
60
61		psc@2c00 {		// PSC6
62			status = "disabled";
63		};
64
65		ethernet@3000 {
66			phy-handle = <&phy0>;
67		};
68
69		mdio@3000 {
70			phy0: ethernet-phy@2 {
71				reg = <2>;
72			};
73		};
74
75		i2c@3d00 {
76			status = "disabled";
77		};
78
79		i2c@3d40 {
80			rtc@68 {
81				compatible = "dallas,ds1339";
82				reg = <0x68>;
83			};
84		};
85
86		sram@8000 {
87			compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
88			reg = <0x8000 0x4000>;
89		};
90	};
91
92	pci@f0000d00 {
93		status = "disabled";
94	};
95
96	localbus {
97		ranges = <0 0 0xff000000 0x01000000
98			  1 0 0x50000000 0x00010000
99			  2 0 0x50010000 0x00010000
100			  3 0 0x50020000 0x00010000>;
101
102		// 8-bit DualPort SRAM on LocalPlus Bus CS1
103		kollmorgen@1,0 {
104			compatible = "promess,motionpro-kollmorgen";
105			reg = <1 0 0x10000>;
106			interrupts = <1 1 0>;
107		};
108
109		// 8-bit board CPLD on LocalPlus Bus CS2
110		cpld@2,0 {
111			compatible = "promess,motionpro-cpld";
112			reg = <2 0 0x10000>;
113		};
114
115		// 8-bit custom Anybus Module on LocalPlus Bus CS3
116		anybus@3,0 {
117			compatible = "promess,motionpro-anybus";
118			reg = <3 0 0x10000>;
119		};
120		pro_module_general@3,0 {
121			compatible = "promess,pro_module_general";
122			reg = <3 0 3>;
123		};
124		pro_module_dio@3,800 {
125			compatible = "promess,pro_module_dio";
126			reg = <3 0x800 2>;
127		};
128
129		// 16-bit flash device at LocalPlus Bus CS0
130		flash@0,0 {
131			compatible = "cfi-flash";
132			reg = <0 0 0x01000000>;
133			bank-width = <2>;
134			device-width = <2>;
135			#size-cells = <1>;
136			#address-cells = <1>;
137		};
138
139	};
140};
141