1/* 2 * Motion-PRO board Device Tree Source 3 * 4 * Copyright (C) 2007 Semihalf 5 * Marian Balakowicz <m8@semihalf.com> 6 * 7 * This program is free software; you can redistribute it and/or modify it 8 * under the terms of the GNU General Public License as published by the 9 * Free Software Foundation; either version 2 of the License, or (at your 10 * option) any later version. 11 */ 12 13/dts-v1/; 14 15/ { 16 model = "promess,motionpro"; 17 compatible = "promess,motionpro"; 18 #address-cells = <1>; 19 #size-cells = <1>; 20 interrupt-parent = <&mpc5200_pic>; 21 22 cpus { 23 #address-cells = <1>; 24 #size-cells = <0>; 25 26 PowerPC,5200@0 { 27 device_type = "cpu"; 28 reg = <0>; 29 d-cache-line-size = <32>; 30 i-cache-line-size = <32>; 31 d-cache-size = <0x4000>; // L1, 16K 32 i-cache-size = <0x4000>; // L1, 16K 33 timebase-frequency = <0>; // from bootloader 34 bus-frequency = <0>; // from bootloader 35 clock-frequency = <0>; // from bootloader 36 }; 37 }; 38 39 memory { 40 device_type = "memory"; 41 reg = <0x00000000 0x04000000>; // 64MB 42 }; 43 44 soc5200@f0000000 { 45 #address-cells = <1>; 46 #size-cells = <1>; 47 compatible = "fsl,mpc5200b-immr"; 48 ranges = <0 0xf0000000 0x0000c000>; 49 reg = <0xf0000000 0x00000100>; 50 bus-frequency = <0>; // from bootloader 51 system-frequency = <0>; // from bootloader 52 53 cdm@200 { 54 compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm"; 55 reg = <0x200 0x38>; 56 }; 57 58 mpc5200_pic: interrupt-controller@500 { 59 // 5200 interrupts are encoded into two levels; 60 interrupt-controller; 61 #interrupt-cells = <3>; 62 compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic"; 63 reg = <0x500 0x80>; 64 }; 65 66 timer@600 { // General Purpose Timer 67 compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; 68 reg = <0x600 0x10>; 69 interrupts = <1 9 0>; 70 fsl,has-wdt; 71 }; 72 73 timer@610 { // General Purpose Timer 74 compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; 75 reg = <0x610 0x10>; 76 interrupts = <1 10 0>; 77 }; 78 79 timer@620 { // General Purpose Timer 80 compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; 81 reg = <0x620 0x10>; 82 interrupts = <1 11 0>; 83 }; 84 85 timer@630 { // General Purpose Timer 86 compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; 87 reg = <0x630 0x10>; 88 interrupts = <1 12 0>; 89 }; 90 91 timer@640 { // General Purpose Timer 92 compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; 93 reg = <0x640 0x10>; 94 interrupts = <1 13 0>; 95 }; 96 97 timer@650 { // General Purpose Timer 98 compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; 99 reg = <0x650 0x10>; 100 interrupts = <1 14 0>; 101 }; 102 103 timer@660 { // Motion-PRO status LED 104 compatible = "promess,motionpro-led"; 105 label = "motionpro-statusled"; 106 reg = <0x660 0x10>; 107 interrupts = <1 15 0>; 108 blink-delay = <100>; // 100 msec 109 }; 110 111 timer@670 { // Motion-PRO ready LED 112 compatible = "promess,motionpro-led"; 113 label = "motionpro-readyled"; 114 reg = <0x670 0x10>; 115 interrupts = <1 16 0>; 116 }; 117 118 rtc@800 { // Real time clock 119 compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc"; 120 reg = <0x800 0x100>; 121 interrupts = <1 5 0 1 6 0>; 122 }; 123 124 can@980 { 125 compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan"; 126 interrupts = <2 18 0>; 127 reg = <0x980 0x80>; 128 }; 129 130 gpio_simple: gpio@b00 { 131 compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio"; 132 reg = <0xb00 0x40>; 133 interrupts = <1 7 0>; 134 gpio-controller; 135 #gpio-cells = <2>; 136 }; 137 138 gpio_wkup: gpio@c00 { 139 compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup"; 140 reg = <0xc00 0x40>; 141 interrupts = <1 8 0 0 3 0>; 142 gpio-controller; 143 #gpio-cells = <2>; 144 }; 145 146 spi@f00 { 147 compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi"; 148 reg = <0xf00 0x20>; 149 interrupts = <2 13 0 2 14 0>; 150 }; 151 152 usb@1000 { 153 compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be"; 154 reg = <0x1000 0xff>; 155 interrupts = <2 6 0>; 156 }; 157 158 dma-controller@1200 { 159 compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm"; 160 reg = <0x1200 0x80>; 161 interrupts = <3 0 0 3 1 0 3 2 0 3 3 0 162 3 4 0 3 5 0 3 6 0 3 7 0 163 3 8 0 3 9 0 3 10 0 3 11 0 164 3 12 0 3 13 0 3 14 0 3 15 0>; 165 }; 166 167 xlb@1f00 { 168 compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb"; 169 reg = <0x1f00 0x100>; 170 }; 171 172 psc@2000 { // PSC1 173 compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; 174 reg = <0x2000 0x100>; 175 interrupts = <2 1 0>; 176 }; 177 178 // PSC2 in spi master mode 179 psc@2200 { // PSC2 180 compatible = "fsl,mpc5200b-psc-spi","fsl,mpc5200-psc-spi"; 181 cell-index = <1>; 182 reg = <0x2200 0x100>; 183 interrupts = <2 2 0>; 184 }; 185 186 // PSC5 in uart mode 187 psc@2800 { // PSC5 188 compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; 189 reg = <0x2800 0x100>; 190 interrupts = <2 12 0>; 191 }; 192 193 ethernet@3000 { 194 compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec"; 195 reg = <0x3000 0x400>; 196 local-mac-address = [ 00 00 00 00 00 00 ]; 197 interrupts = <2 5 0>; 198 phy-handle = <&phy0>; 199 }; 200 201 mdio@3000 { 202 #address-cells = <1>; 203 #size-cells = <0>; 204 compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio"; 205 reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts 206 interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co. 207 208 phy0: ethernet-phy@2 { 209 reg = <2>; 210 }; 211 }; 212 213 ata@3a00 { 214 compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata"; 215 reg = <0x3a00 0x100>; 216 interrupts = <2 7 0>; 217 }; 218 219 i2c@3d40 { 220 #address-cells = <1>; 221 #size-cells = <0>; 222 compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c"; 223 reg = <0x3d40 0x40>; 224 interrupts = <2 16 0>; 225 226 rtc@68 { 227 compatible = "dallas,ds1339"; 228 reg = <0x68>; 229 }; 230 }; 231 232 sram@8000 { 233 compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram"; 234 reg = <0x8000 0x4000>; 235 }; 236 }; 237 238 localbus { 239 compatible = "fsl,mpc5200b-lpb","fsl,mpc5200-lpb","simple-bus"; 240 #address-cells = <2>; 241 #size-cells = <1>; 242 ranges = <0 0 0xff000000 0x01000000 243 1 0 0x50000000 0x00010000 244 2 0 0x50010000 0x00010000 245 3 0 0x50020000 0x00010000>; 246 247 // 8-bit DualPort SRAM on LocalPlus Bus CS1 248 kollmorgen@1,0 { 249 compatible = "promess,motionpro-kollmorgen"; 250 reg = <1 0 0x10000>; 251 interrupts = <1 1 0>; 252 }; 253 254 // 8-bit board CPLD on LocalPlus Bus CS2 255 cpld@2,0 { 256 compatible = "promess,motionpro-cpld"; 257 reg = <2 0 0x10000>; 258 }; 259 260 // 8-bit custom Anybus Module on LocalPlus Bus CS3 261 anybus@3,0 { 262 compatible = "promess,motionpro-anybus"; 263 reg = <3 0 0x10000>; 264 }; 265 pro_module_general@3,0 { 266 compatible = "promess,pro_module_general"; 267 reg = <3 0 3>; 268 }; 269 pro_module_dio@3,800 { 270 compatible = "promess,pro_module_dio"; 271 reg = <3 0x800 2>; 272 }; 273 274 // 16-bit flash device at LocalPlus Bus CS0 275 flash@0,0 { 276 compatible = "cfi-flash"; 277 reg = <0 0 0x01000000>; 278 bank-width = <2>; 279 device-width = <2>; 280 }; 281 }; 282}; 283