1/* 2 * Lite5200B board Device Tree Source 3 * 4 * Copyright 2006-2007 Secret Lab Technologies Ltd. 5 * Grant Likely <grant.likely@secretlab.ca> 6 * 7 * This program is free software; you can redistribute it and/or modify it 8 * under the terms of the GNU General Public License as published by the 9 * Free Software Foundation; either version 2 of the License, or (at your 10 * option) any later version. 11 */ 12 13/* 14 * WARNING: Do not depend on this tree layout remaining static just yet. 15 * The MPC5200 device tree conventions are still in flux 16 * Keep an eye on the linuxppc-dev mailing list for more details 17 */ 18 19/ { 20 model = "fsl,lite5200b"; 21 // revision = "1.0"; 22 compatible = "fsl,lite5200b","generic-mpc5200"; 23 #address-cells = <1>; 24 #size-cells = <1>; 25 26 cpus { 27 #address-cells = <1>; 28 #size-cells = <0>; 29 30 PowerPC,5200@0 { 31 device_type = "cpu"; 32 reg = <0>; 33 d-cache-line-size = <20>; 34 i-cache-line-size = <20>; 35 d-cache-size = <4000>; // L1, 16K 36 i-cache-size = <4000>; // L1, 16K 37 timebase-frequency = <0>; // from bootloader 38 bus-frequency = <0>; // from bootloader 39 clock-frequency = <0>; // from bootloader 40 }; 41 }; 42 43 memory { 44 device_type = "memory"; 45 reg = <00000000 10000000>; // 256MB 46 }; 47 48 soc5200@f0000000 { 49 model = "fsl,mpc5200b"; 50 compatible = "mpc5200"; 51 revision = ""; // from bootloader 52 device_type = "soc"; 53 ranges = <0 f0000000 0000c000>; 54 reg = <f0000000 00000100>; 55 bus-frequency = <0>; // from bootloader 56 system-frequency = <0>; // from bootloader 57 58 cdm@200 { 59 compatible = "mpc5200b-cdm","mpc5200-cdm"; 60 reg = <200 38>; 61 }; 62 63 mpc5200_pic: pic@500 { 64 // 5200 interrupts are encoded into two levels; 65 interrupt-controller; 66 #interrupt-cells = <3>; 67 device_type = "interrupt-controller"; 68 compatible = "mpc5200b-pic","mpc5200-pic"; 69 reg = <500 80>; 70 }; 71 72 gpt@600 { // General Purpose Timer 73 compatible = "mpc5200b-gpt","mpc5200-gpt"; 74 device_type = "gpt"; 75 cell-index = <0>; 76 reg = <600 10>; 77 interrupts = <1 9 0>; 78 interrupt-parent = <&mpc5200_pic>; 79 has-wdt; 80 }; 81 82 gpt@610 { // General Purpose Timer 83 compatible = "mpc5200b-gpt","mpc5200-gpt"; 84 device_type = "gpt"; 85 cell-index = <1>; 86 reg = <610 10>; 87 interrupts = <1 a 0>; 88 interrupt-parent = <&mpc5200_pic>; 89 }; 90 91 gpt@620 { // General Purpose Timer 92 compatible = "mpc5200b-gpt","mpc5200-gpt"; 93 device_type = "gpt"; 94 cell-index = <2>; 95 reg = <620 10>; 96 interrupts = <1 b 0>; 97 interrupt-parent = <&mpc5200_pic>; 98 }; 99 100 gpt@630 { // General Purpose Timer 101 compatible = "mpc5200b-gpt","mpc5200-gpt"; 102 device_type = "gpt"; 103 cell-index = <3>; 104 reg = <630 10>; 105 interrupts = <1 c 0>; 106 interrupt-parent = <&mpc5200_pic>; 107 }; 108 109 gpt@640 { // General Purpose Timer 110 compatible = "mpc5200b-gpt","mpc5200-gpt"; 111 device_type = "gpt"; 112 cell-index = <4>; 113 reg = <640 10>; 114 interrupts = <1 d 0>; 115 interrupt-parent = <&mpc5200_pic>; 116 }; 117 118 gpt@650 { // General Purpose Timer 119 compatible = "mpc5200b-gpt","mpc5200-gpt"; 120 device_type = "gpt"; 121 cell-index = <5>; 122 reg = <650 10>; 123 interrupts = <1 e 0>; 124 interrupt-parent = <&mpc5200_pic>; 125 }; 126 127 gpt@660 { // General Purpose Timer 128 compatible = "mpc5200b-gpt","mpc5200-gpt"; 129 device_type = "gpt"; 130 cell-index = <6>; 131 reg = <660 10>; 132 interrupts = <1 f 0>; 133 interrupt-parent = <&mpc5200_pic>; 134 }; 135 136 gpt@670 { // General Purpose Timer 137 compatible = "mpc5200b-gpt","mpc5200-gpt"; 138 device_type = "gpt"; 139 cell-index = <7>; 140 reg = <670 10>; 141 interrupts = <1 10 0>; 142 interrupt-parent = <&mpc5200_pic>; 143 }; 144 145 rtc@800 { // Real time clock 146 compatible = "mpc5200b-rtc","mpc5200-rtc"; 147 device_type = "rtc"; 148 reg = <800 100>; 149 interrupts = <1 5 0 1 6 0>; 150 interrupt-parent = <&mpc5200_pic>; 151 }; 152 153 mscan@900 { 154 device_type = "mscan"; 155 compatible = "mpc5200b-mscan","mpc5200-mscan"; 156 cell-index = <0>; 157 interrupts = <2 11 0>; 158 interrupt-parent = <&mpc5200_pic>; 159 reg = <900 80>; 160 }; 161 162 mscan@980 { 163 device_type = "mscan"; 164 compatible = "mpc5200b-mscan","mpc5200-mscan"; 165 cell-index = <1>; 166 interrupts = <2 12 0>; 167 interrupt-parent = <&mpc5200_pic>; 168 reg = <980 80>; 169 }; 170 171 gpio@b00 { 172 compatible = "mpc5200b-gpio","mpc5200-gpio"; 173 reg = <b00 40>; 174 interrupts = <1 7 0>; 175 interrupt-parent = <&mpc5200_pic>; 176 }; 177 178 gpio-wkup@c00 { 179 compatible = "mpc5200b-gpio-wkup","mpc5200-gpio-wkup"; 180 reg = <c00 40>; 181 interrupts = <1 8 0 0 3 0>; 182 interrupt-parent = <&mpc5200_pic>; 183 }; 184 185 spi@f00 { 186 device_type = "spi"; 187 compatible = "mpc5200b-spi","mpc5200-spi"; 188 reg = <f00 20>; 189 interrupts = <2 d 0 2 e 0>; 190 interrupt-parent = <&mpc5200_pic>; 191 }; 192 193 usb@1000 { 194 device_type = "usb-ohci-be"; 195 compatible = "mpc5200b-ohci","mpc5200-ohci","ohci-be"; 196 reg = <1000 ff>; 197 interrupts = <2 6 0>; 198 interrupt-parent = <&mpc5200_pic>; 199 }; 200 201 bestcomm@1200 { 202 device_type = "dma-controller"; 203 compatible = "mpc5200b-bestcomm","mpc5200-bestcomm"; 204 reg = <1200 80>; 205 interrupts = <3 0 0 3 1 0 3 2 0 3 3 0 206 3 4 0 3 5 0 3 6 0 3 7 0 207 3 8 0 3 9 0 3 a 0 3 b 0 208 3 c 0 3 d 0 3 e 0 3 f 0>; 209 interrupt-parent = <&mpc5200_pic>; 210 }; 211 212 xlb@1f00 { 213 compatible = "mpc5200b-xlb","mpc5200-xlb"; 214 reg = <1f00 100>; 215 }; 216 217 serial@2000 { // PSC1 218 device_type = "serial"; 219 compatible = "mpc5200b-psc-uart","mpc5200-psc-uart"; 220 port-number = <0>; // Logical port assignment 221 cell-index = <0>; 222 reg = <2000 100>; 223 interrupts = <2 1 0>; 224 interrupt-parent = <&mpc5200_pic>; 225 }; 226 227 // PSC2 in ac97 mode example 228 //ac97@2200 { // PSC2 229 // device_type = "sound"; 230 // compatible = "mpc5200b-psc-ac97","mpc5200-psc-ac97"; 231 // cell-index = <1>; 232 // reg = <2200 100>; 233 // interrupts = <2 2 0>; 234 // interrupt-parent = <&mpc5200_pic>; 235 //}; 236 237 // PSC3 in CODEC mode example 238 //i2s@2400 { // PSC3 239 // device_type = "sound"; 240 // compatible = "mpc5200b-psc-i2s"; //not 5200 compatible 241 // cell-index = <2>; 242 // reg = <2400 100>; 243 // interrupts = <2 3 0>; 244 // interrupt-parent = <&mpc5200_pic>; 245 //}; 246 247 // PSC4 in uart mode example 248 //serial@2600 { // PSC4 249 // device_type = "serial"; 250 // compatible = "mpc5200b-psc-uart","mpc5200-psc-uart"; 251 // cell-index = <3>; 252 // reg = <2600 100>; 253 // interrupts = <2 b 0>; 254 // interrupt-parent = <&mpc5200_pic>; 255 //}; 256 257 // PSC5 in uart mode example 258 //serial@2800 { // PSC5 259 // device_type = "serial"; 260 // compatible = "mpc5200b-psc-uart","mpc5200-psc-uart"; 261 // cell-index = <4>; 262 // reg = <2800 100>; 263 // interrupts = <2 c 0>; 264 // interrupt-parent = <&mpc5200_pic>; 265 //}; 266 267 // PSC6 in spi mode example 268 //spi@2c00 { // PSC6 269 // device_type = "spi"; 270 // compatible = "mpc5200b-psc-spi","mpc5200-psc-spi"; 271 // cell-index = <5>; 272 // reg = <2c00 100>; 273 // interrupts = <2 4 0>; 274 // interrupt-parent = <&mpc5200_pic>; 275 //}; 276 277 ethernet@3000 { 278 device_type = "network"; 279 compatible = "mpc5200b-fec","mpc5200-fec"; 280 reg = <3000 400>; 281 mac-address = [ 02 03 04 05 06 07 ]; // Bad! 282 interrupts = <2 5 0>; 283 interrupt-parent = <&mpc5200_pic>; 284 phy-handle = <&phy0>; 285 }; 286 287 mdio@3000 { 288 #address-cells = <1>; 289 #size-cells = <0>; 290 device_type = "mdio"; 291 compatible = "mpc5200b-fec-phy"; 292 reg = <3000 400>; // fec range, since we need to setup fec interrupts 293 interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co. 294 interrupt-parent = <&mpc5200_pic>; 295 296 phy0:ethernet-phy@0 { 297 device_type = "ethernet-phy"; 298 reg = <0>; 299 }; 300 }; 301 302 ata@3a00 { 303 device_type = "ata"; 304 compatible = "mpc5200b-ata","mpc5200-ata"; 305 reg = <3a00 100>; 306 interrupts = <2 7 0>; 307 interrupt-parent = <&mpc5200_pic>; 308 }; 309 310 i2c@3d00 { 311 device_type = "i2c"; 312 compatible = "mpc5200b-i2c","mpc5200-i2c","fsl-i2c"; 313 cell-index = <0>; 314 reg = <3d00 40>; 315 interrupts = <2 f 0>; 316 interrupt-parent = <&mpc5200_pic>; 317 fsl5200-clocking; 318 }; 319 320 i2c@3d40 { 321 device_type = "i2c"; 322 compatible = "mpc5200b-i2c","mpc5200-i2c","fsl-i2c"; 323 cell-index = <1>; 324 reg = <3d40 40>; 325 interrupts = <2 10 0>; 326 interrupt-parent = <&mpc5200_pic>; 327 fsl5200-clocking; 328 }; 329 sram@8000 { 330 device_type = "sram"; 331 compatible = "mpc5200b-sram","mpc5200-sram","sram"; 332 reg = <8000 4000>; 333 }; 334 }; 335 336 pci@f0000d00 { 337 #interrupt-cells = <1>; 338 #size-cells = <2>; 339 #address-cells = <3>; 340 device_type = "pci"; 341 compatible = "mpc5200b-pci","mpc5200-pci"; 342 reg = <f0000d00 100>; 343 interrupt-map-mask = <f800 0 0 7>; 344 interrupt-map = <c000 0 0 1 &mpc5200_pic 0 0 3 // 1st slot 345 c000 0 0 2 &mpc5200_pic 1 1 3 346 c000 0 0 3 &mpc5200_pic 1 2 3 347 c000 0 0 4 &mpc5200_pic 1 3 3 348 349 c800 0 0 1 &mpc5200_pic 1 1 3 // 2nd slot 350 c800 0 0 2 &mpc5200_pic 1 2 3 351 c800 0 0 3 &mpc5200_pic 1 3 3 352 c800 0 0 4 &mpc5200_pic 0 0 3>; 353 clock-frequency = <0>; // From boot loader 354 interrupts = <2 8 0 2 9 0 2 a 0>; 355 interrupt-parent = <&mpc5200_pic>; 356 bus-range = <0 0>; 357 ranges = <42000000 0 80000000 80000000 0 20000000 358 02000000 0 a0000000 a0000000 0 10000000 359 01000000 0 00000000 b0000000 0 01000000>; 360 }; 361}; 362